diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 60 |
1 files changed, 31 insertions, 29 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ec22b7494dd7..81aa52fe330b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -11952,21 +11952,11 @@ connected_sink_compute_bpp(struct intel_connector *connector, pipe_config->pipe_bpp = connector->base.display_info.bpc*3; } - /* Clamp bpp to default limit on screens without EDID 1.4 */ - if (connector->base.display_info.bpc == 0) { - int type = connector->base.connector_type; - int clamp_bpp = 24; - - /* Fall back to 18 bpp when DP sink capability is unknown. */ - if (type == DRM_MODE_CONNECTOR_DisplayPort || - type == DRM_MODE_CONNECTOR_eDP) - clamp_bpp = 18; - - if (bpp > clamp_bpp) { - DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of %d\n", - bpp, clamp_bpp); - pipe_config->pipe_bpp = clamp_bpp; - } + /* Clamp bpp to 8 on screens without EDID 1.4 */ + if (connector->base.display_info.bpc == 0 && bpp > 24) { + DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n", + bpp); + pipe_config->pipe_bpp = 24; } } @@ -14170,6 +14160,8 @@ static void intel_setup_outputs(struct drm_device *dev) if (I915_READ(PCH_DP_D) & DP_DETECTED) intel_dp_init(dev, PCH_DP_D, PORT_D); } else if (IS_VALLEYVIEW(dev)) { + bool has_edp, has_port; + /* * The DP_DETECTED bit is the latched state of the DDC * SDA pin at boot. However since eDP doesn't require DDC @@ -14178,27 +14170,37 @@ static void intel_setup_outputs(struct drm_device *dev) * Thus we can't rely on the DP_DETECTED bit alone to detect * eDP ports. Consult the VBT as well as DP_DETECTED to * detect eDP ports. + * + * Sadly the straps seem to be missing sometimes even for HDMI + * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap + * and VBT for the presence of the port. Additionally we can't + * trust the port type the VBT declares as we've seen at least + * HDMI ports that the VBT claim are DP or eDP. */ - if (I915_READ(VLV_HDMIB) & SDVO_DETECTED && - !intel_dp_is_edp(dev, PORT_B)) + has_edp = intel_dp_is_edp(dev, PORT_B); + has_port = intel_bios_is_port_present(dev_priv, PORT_B); + if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port) + has_edp &= intel_dp_init(dev, VLV_DP_B, PORT_B); + if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp) intel_hdmi_init(dev, VLV_HDMIB, PORT_B); - if (I915_READ(VLV_DP_B) & DP_DETECTED || - intel_dp_is_edp(dev, PORT_B)) - intel_dp_init(dev, VLV_DP_B, PORT_B); - if (I915_READ(VLV_HDMIC) & SDVO_DETECTED && - !intel_dp_is_edp(dev, PORT_C)) + has_edp = intel_dp_is_edp(dev, PORT_C); + has_port = intel_bios_is_port_present(dev_priv, PORT_C); + if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port) + has_edp &= intel_dp_init(dev, VLV_DP_C, PORT_C); + if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp) intel_hdmi_init(dev, VLV_HDMIC, PORT_C); - if (I915_READ(VLV_DP_C) & DP_DETECTED || - intel_dp_is_edp(dev, PORT_C)) - intel_dp_init(dev, VLV_DP_C, PORT_C); if (IS_CHERRYVIEW(dev)) { - /* eDP not supported on port D, so don't check VBT */ - if (I915_READ(CHV_HDMID) & SDVO_DETECTED) - intel_hdmi_init(dev, CHV_HDMID, PORT_D); - if (I915_READ(CHV_DP_D) & DP_DETECTED) + /* + * eDP not supported on port D, + * so no need to worry about it + */ + has_port = intel_bios_is_port_present(dev_priv, PORT_D); + if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port) intel_dp_init(dev, CHV_DP_D, PORT_D); + if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port) + intel_hdmi_init(dev, CHV_HDMID, PORT_D); } intel_dsi_init(dev); |