summaryrefslogtreecommitdiff
path: root/include/uapi/linux/dm-ioctl.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/dm-ioctl.h')
-rw-r--r--include/uapi/linux/dm-ioctl.h339
1 files changed, 339 insertions, 0 deletions
diff --git a/include/uapi/linux/dm-ioctl.h b/include/uapi/linux/dm-ioctl.h
new file mode 100644
index 000000000000..91e3a360f611
--- /dev/null
+++ b/include/uapi/linux/dm-ioctl.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2001 - 2003 Sistina Software (UK) Limited.
+ * Copyright (C) 2004 - 2009 Red Hat, Inc. All rights reserved.
+ *
+ * This file is released under the LGPL.
+ */
+
+#ifndef _LINUX_DM_IOCTL_V4_H
+#define _LINUX_DM_IOCTL_V4_H
+
+#include <linux/types.h>
+
+#define DM_DIR "mapper" /* Slashes not supported */
+#define DM_CONTROL_NODE "control"
+#define DM_MAX_TYPE_NAME 16
+#define DM_NAME_LEN 128
+#define DM_UUID_LEN 129
+
+/*
+ * A traditional ioctl interface for the device mapper.
+ *
+ * Each device can have two tables associated with it, an
+ * 'active' table which is the one currently used by io passing
+ * through the device, and an 'inactive' one which is a table
+ * that is being prepared as a replacement for the 'active' one.
+ *
+ * DM_VERSION:
+ * Just get the version information for the ioctl interface.
+ *
+ * DM_REMOVE_ALL:
+ * Remove all dm devices, destroy all tables. Only really used
+ * for debug.
+ *
+ * DM_LIST_DEVICES:
+ * Get a list of all the dm device names.
+ *
+ * DM_DEV_CREATE:
+ * Create a new device, neither the 'active' or 'inactive' table
+ * slots will be filled. The device will be in suspended state
+ * after creation, however any io to the device will get errored
+ * since it will be out-of-bounds.
+ *
+ * DM_DEV_REMOVE:
+ * Remove a device, destroy any tables.
+ *
+ * DM_DEV_RENAME:
+ * Rename a device or set its uuid if none was previously supplied.
+ *
+ * DM_SUSPEND:
+ * This performs both suspend and resume, depending which flag is
+ * passed in.
+ * Suspend: This command will not return until all pending io to
+ * the device has completed. Further io will be deferred until
+ * the device is resumed.
+ * Resume: It is no longer an error to issue this command on an
+ * unsuspended device. If a table is present in the 'inactive'
+ * slot, it will be moved to the active slot, then the old table
+ * from the active slot will be _destroyed_. Finally the device
+ * is resumed.
+ *
+ * DM_DEV_STATUS:
+ * Retrieves the status for the table in the 'active' slot.
+ *
+ * DM_DEV_WAIT:
+ * Wait for a significant event to occur to the device. This
+ * could either be caused by an event triggered by one of the
+ * targets of the table in the 'active' slot, or a table change.
+ *
+ * DM_TABLE_LOAD:
+ * Load a table into the 'inactive' slot for the device. The
+ * device does _not_ need to be suspended prior to this command.
+ *
+ * DM_TABLE_CLEAR:
+ * Destroy any table in the 'inactive' slot (ie. abort).
+ *
+ * DM_TABLE_DEPS:
+ * Return a set of device dependencies for the 'active' table.
+ *
+ * DM_TABLE_STATUS:
+ * Return the targets status for the 'active' table.
+ *
+ * DM_TARGET_MSG:
+ * Pass a message string to the target at a specific offset of a device.
+ *
+ * DM_DEV_SET_GEOMETRY:
+ * Set the geometry of a device by passing in a string in this format:
+ *
+ * "cylinders heads sectors_per_track start_sector"
+ *
+ * Beware that CHS geometry is nearly obsolete and only provided
+ * for compatibility with dm devices that can be booted by a PC
+ * BIOS. See struct hd_geometry for range limits. Also note that
+ * the geometry is erased if the device size changes.
+ */
+
+/*
+ * All ioctl arguments consist of a single chunk of memory, with
+ * this structure at the start. If a uuid is specified any
+ * lookup (eg. for a DM_INFO) will be done on that, *not* the
+ * name.
+ */
+struct dm_ioctl {
+ /*
+ * The version number is made up of three parts:
+ * major - no backward or forward compatibility,
+ * minor - only backwards compatible,
+ * patch - both backwards and forwards compatible.
+ *
+ * All clients of the ioctl interface should fill in the
+ * version number of the interface that they were
+ * compiled with.
+ *
+ * All recognised ioctl commands (ie. those that don't
+ * return -ENOTTY) fill out this field, even if the
+ * command failed.
+ */
+ __u32 version[3]; /* in/out */
+ __u32 data_size; /* total size of data passed in
+ * including this struct */
+
+ __u32 data_start; /* offset to start of data
+ * relative to start of this struct */
+
+ __u32 target_count; /* in/out */
+ __s32 open_count; /* out */
+ __u32 flags; /* in/out */
+
+ /*
+ * event_nr holds either the event number (input and output) or the
+ * udev cookie value (input only).
+ * The DM_DEV_WAIT ioctl takes an event number as input.
+ * The DM_SUSPEND, DM_DEV_REMOVE and DM_DEV_RENAME ioctls
+ * use the field as a cookie to return in the DM_COOKIE
+ * variable with the uevents they issue.
+ * For output, the ioctls return the event number, not the cookie.
+ */
+ __u32 event_nr; /* in/out */
+ __u32 padding;
+
+ __u64 dev; /* in/out */
+
+ char name[DM_NAME_LEN]; /* device name */
+ char uuid[DM_UUID_LEN]; /* unique identifier for
+ * the block device */
+ char data[7]; /* padding or data */
+};
+
+/*
+ * Used to specify tables. These structures appear after the
+ * dm_ioctl.
+ */
+struct dm_target_spec {
+ __u64 sector_start;
+ __u64 length;
+ __s32 status; /* used when reading from kernel only */
+
+ /*
+ * Location of the next dm_target_spec.
+ * - When specifying targets on a DM_TABLE_LOAD command, this value is
+ * the number of bytes from the start of the "current" dm_target_spec
+ * to the start of the "next" dm_target_spec.
+ * - When retrieving targets on a DM_TABLE_STATUS command, this value
+ * is the number of bytes from the start of the first dm_target_spec
+ * (that follows the dm_ioctl struct) to the start of the "next"
+ * dm_target_spec.
+ */
+ __u32 next;
+
+ char target_type[DM_MAX_TYPE_NAME];
+
+ /*
+ * Parameter string starts immediately after this object.
+ * Be careful to add padding after string to ensure correct
+ * alignment of subsequent dm_target_spec.
+ */
+};
+
+/*
+ * Used to retrieve the target dependencies.
+ */
+struct dm_target_deps {
+ __u32 count; /* Array size */
+ __u32 padding; /* unused */
+ __u64 dev[0]; /* out */
+};
+
+/*
+ * Used to get a list of all dm devices.
+ */
+struct dm_name_list {
+ __u64 dev;
+ __u32 next; /* offset to the next record from
+ the _start_ of this */
+ char name[0];
+};
+
+/*
+ * Used to retrieve the target versions
+ */
+struct dm_target_versions {
+ __u32 next;
+ __u32 version[3];
+
+ char name[0];
+};
+
+/*
+ * Used to pass message to a target
+ */
+struct dm_target_msg {
+ __u64 sector; /* Device sector */
+
+ char message[0];
+};
+
+/*
+ * If you change this make sure you make the corresponding change
+ * to dm-ioctl.c:lookup_ioctl()
+ */
+enum {
+ /* Top level cmds */
+ DM_VERSION_CMD = 0,
+ DM_REMOVE_ALL_CMD,
+ DM_LIST_DEVICES_CMD,
+
+ /* device level cmds */
+ DM_DEV_CREATE_CMD,
+ DM_DEV_REMOVE_CMD,
+ DM_DEV_RENAME_CMD,
+ DM_DEV_SUSPEND_CMD,
+ DM_DEV_STATUS_CMD,
+ DM_DEV_WAIT_CMD,
+
+ /* Table level cmds */
+ DM_TABLE_LOAD_CMD,
+ DM_TABLE_CLEAR_CMD,
+ DM_TABLE_DEPS_CMD,
+ DM_TABLE_STATUS_CMD,
+
+ /* Added later */
+ DM_LIST_VERSIONS_CMD,
+ DM_TARGET_MSG_CMD,
+ DM_DEV_SET_GEOMETRY_CMD
+};
+
+#define DM_IOCTL 0xfd
+
+#define DM_VERSION _IOWR(DM_IOCTL, DM_VERSION_CMD, struct dm_ioctl)
+#define DM_REMOVE_ALL _IOWR(DM_IOCTL, DM_REMOVE_ALL_CMD, struct dm_ioctl)
+#define DM_LIST_DEVICES _IOWR(DM_IOCTL, DM_LIST_DEVICES_CMD, struct dm_ioctl)
+
+#define DM_DEV_CREATE _IOWR(DM_IOCTL, DM_DEV_CREATE_CMD, struct dm_ioctl)
+#define DM_DEV_REMOVE _IOWR(DM_IOCTL, DM_DEV_REMOVE_CMD, struct dm_ioctl)
+#define DM_DEV_RENAME _IOWR(DM_IOCTL, DM_DEV_RENAME_CMD, struct dm_ioctl)
+#define DM_DEV_SUSPEND _IOWR(DM_IOCTL, DM_DEV_SUSPEND_CMD, struct dm_ioctl)
+#define DM_DEV_STATUS _IOWR(DM_IOCTL, DM_DEV_STATUS_CMD, struct dm_ioctl)
+#define DM_DEV_WAIT _IOWR(DM_IOCTL, DM_DEV_WAIT_CMD, struct dm_ioctl)
+
+#define DM_TABLE_LOAD _IOWR(DM_IOCTL, DM_TABLE_LOAD_CMD, struct dm_ioctl)
+#define DM_TABLE_CLEAR _IOWR(DM_IOCTL, DM_TABLE_CLEAR_CMD, struct dm_ioctl)
+#define DM_TABLE_DEPS _IOWR(DM_IOCTL, DM_TABLE_DEPS_CMD, struct dm_ioctl)
+#define DM_TABLE_STATUS _IOWR(DM_IOCTL, DM_TABLE_STATUS_CMD, struct dm_ioctl)
+
+#define DM_LIST_VERSIONS _IOWR(DM_IOCTL, DM_LIST_VERSIONS_CMD, struct dm_ioctl)
+
+#define DM_TARGET_MSG _IOWR(DM_IOCTL, DM_TARGET_MSG_CMD, struct dm_ioctl)
+#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
+
+#define DM_VERSION_MAJOR 4
+#define DM_VERSION_MINOR 23
+#define DM_VERSION_PATCHLEVEL 0
+#define DM_VERSION_EXTRA "-ioctl (2012-07-25)"
+
+/* Status bits */
+#define DM_READONLY_FLAG (1 << 0) /* In/Out */
+#define DM_SUSPEND_FLAG (1 << 1) /* In/Out */
+#define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */
+
+/*
+ * Flag passed into ioctl STATUS command to get table information
+ * rather than current status.
+ */
+#define DM_STATUS_TABLE_FLAG (1 << 4) /* In */
+
+/*
+ * Flags that indicate whether a table is present in either of
+ * the two table slots that a device has.
+ */
+#define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */
+#define DM_INACTIVE_PRESENT_FLAG (1 << 6) /* Out */
+
+/*
+ * Indicates that the buffer passed in wasn't big enough for the
+ * results.
+ */
+#define DM_BUFFER_FULL_FLAG (1 << 8) /* Out */
+
+/*
+ * This flag is now ignored.
+ */
+#define DM_SKIP_BDGET_FLAG (1 << 9) /* In */
+
+/*
+ * Set this to avoid attempting to freeze any filesystem when suspending.
+ */
+#define DM_SKIP_LOCKFS_FLAG (1 << 10) /* In */
+
+/*
+ * Set this to suspend without flushing queued ios.
+ * Also disables flushing uncommitted changes in the thin target before
+ * generating statistics for DM_TABLE_STATUS and DM_DEV_WAIT.
+ */
+#define DM_NOFLUSH_FLAG (1 << 11) /* In */
+
+/*
+ * If set, any table information returned will relate to the inactive
+ * table instead of the live one. Always check DM_INACTIVE_PRESENT_FLAG
+ * is set before using the data returned.
+ */
+#define DM_QUERY_INACTIVE_TABLE_FLAG (1 << 12) /* In */
+
+/*
+ * If set, a uevent was generated for which the caller may need to wait.
+ */
+#define DM_UEVENT_GENERATED_FLAG (1 << 13) /* Out */
+
+/*
+ * If set, rename changes the uuid not the name. Only permitted
+ * if no uuid was previously supplied: an existing uuid cannot be changed.
+ */
+#define DM_UUID_FLAG (1 << 14) /* In */
+
+/*
+ * If set, all buffers are wiped after use. Use when sending
+ * or requesting sensitive data such as an encryption key.
+ */
+#define DM_SECURE_DATA_FLAG (1 << 15) /* In */
+
+#endif /* _LINUX_DM_IOCTL_H */