summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-11-27Linux 3.18.127v3.18.127Greg Kroah-Hartman
2018-11-27HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privilegesEric Biggers
commit 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream. When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: <stable@vger.kernel.org> # v3.6+ Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jann Horn <jannh@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27new helper: uaccess_kernel()Al Viro
commit db68ce10c4f0a27c1ff9fa0e789e5c41f8c4ea63 upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [only take the include/linux/uaccess.h portion - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27ACPI / platform: Add SMB0001 HID to forbidden_id_listHans de Goede
commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream. Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523 Reported-by: Lukas Kahnert <openproggerfreak@gmail.com> Tested-by: Marc <suaefar@googlemail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27USB: misc: appledisplay: add 20" Apple Cinema DisplayMattias Jacobsson
commit f6501f49199097b99e4e263644d88c90d1ec1060 upstream. Add another Apple Cinema Display to the list of supported displays Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_dataNathan Chancellor
commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream. After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27usb: quirks: Add delay-init quirk for Corsair K70 LUX RGBEmmanuel Pescosta
commit a77112577667cbda7c6292c52d909636aef31fd9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27USB: quirks: Add no-lpm quirk for Raydium touchscreensKai-Heng Feng
commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27usb: cdc-acm: add entry for Hiro (Conexant) modemMaarten Jacobs
commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs <maarten256@outlook.com> Acked-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27uio: Fix an Oops on loadDan Carpenter
commit 432798195bbce1f8cd33d1c0284d0538835e25fb upstream. I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails") Reported-by: Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Tested-by: Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27media: v4l: event: Add subscription to list before calling "add" operationSakari Ailus
commit 92539d3eda2c090b382699bbb896d4b54e9bdece upstream. Patch ad608fbcf166 changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org (for 4.14 and up) Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27Revert "Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV"Greg Kroah-Hartman
This reverts commit 209c27b04ccc679bd7da0b84c2144733ce79c8a3 which is commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream. You Ling writes that this config option isn't even in 3.18.y yet, so it causes a regression. Revert the patch because of this. Reported-by: youling 257 <youling257@gmail.com> Cc: Johan Hedberg <johan.hedberg@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()YueHaibing
[ Upstream commit 025911a5f4e36955498ed50806ad1b02f0f76288 ] There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27Revert "Revert "drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES""Sasha Levin
This reverts commit bc07ee33284ac6e6872d5efad1b321ec0b7b46a4. Which is upstream commit a50940510e94f5fb65ffd79877a60592d85598a9. This revert relies on upstream commit a63b03e2d24 ("mutex: Always clear owner field upon mutex_unlock()") being in the tree, but that commit should not be backported. Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27zram: close udev startup race condition as default groupsMinchan Kim
commit fef912bf860e upstream. commit 98af4d4df889 upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4df889, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by: Howard Chen <howardsoc@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27lib/raid6: Fix arm64 test buildJeremy Linton
[ Upstream commit 313a06e636808387822af24c507cba92703568b1 ] The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27s390/vdso: add missing FORCE to build targetsVasily Gorbik
[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27clk: samsung: exynos5420: Enable PERIS clocks for suspendMarek Szyprowski
[ Upstream commit b33228029d842269e17bba591609e83ed422005d ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27fs/exofs: fix potential memory leak in mount option parsingChengguang Xu
[ Upstream commit 515f1867addaba49c1c6ac73abfaffbc192c1db4 ] There are some cases can cause memory leak when parsing option 'osdname'. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27um: Give start_idle_thread() a return codeRichard Weinberger
[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ] Fixes: arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of non-void function [-Wreturn-type] longjmp() never returns but gcc still warns that the end of the function can be reached. Add a return code and debug aid to detect this impossible case. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27hfsplus: prevent btree data loss on root splitErnesto A. Fernández
[ Upstream commit 0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ] Creating, renaming or deleting a file may cause catalog corruption and data loss. This bug is randomly triggered by xfstests generic/027, but here is a faster reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=100 while [ $i -le 150 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=100 while [ $i -le 150 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null ((++i)) done umount /mnt fsck.hfsplus -n fs.iso The bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27hfs: prevent btree data loss on root splitErnesto A. Fernández
[ Upstream commit d057c036672f33d43a5f7344acbb08cf3a8a0c09 ] This bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this bug, so it's better to fix it. Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27reiserfs: propagate errors from fill_with_dentries() properlyJann Horn
[ Upstream commit b10298d56c9623f9b173f19959732d3184b35f4f ] fill_with_dentries() failed to propagate errors up to reiserfs_for_each_xattr() properly. Plumb them through. Note that reiserfs_for_each_xattr() is only used by reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of reiserfs_delete_xattrs() is discarded anyway, the only difference there is whether a warning is printed to dmesg. The result of reiserfs_chown_xattrs() does matter because it can block chowning of the file to which the xattrs belong; but either way, the resulting state can have misaligned ownership, so my patch doesn't improve things greatly. Credit for making me look at this code goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-27net-gro: reset skb->pkt_type in napi_reuse_skb()Eric Dumazet
[ Upstream commit 33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ] eth_type_trans() assumes initial value for skb->pkt_type is PACKET_HOST. This is indeed the value right after a fresh skb allocation. However, it is possible that GRO merged a packet with a different value (like PACKET_OTHERHOST in case macvlan is used), so we need to make sure napi->skb will have pkt_type set back to PACKET_HOST. Otherwise, valid packets might be dropped by the stack because their pkt_type is not PACKET_HOST. napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add internal interfaces for VLAN"), but this bug always has been there. Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22Linux 3.18.126v3.18.126Greg Kroah-Hartman
2018-11-22hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!Mike Kravetz
commit 5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream. This bug has been experienced several times by the Oracle DB team. The BUG is in remove_inode_hugepages() as follows: /* * If page is mapped, it was faulted in after being * unmapped in caller. Unmap (again) now after taking * the fault mutex. The mutex will prevent faults * until we finish removing the page. * * This race can only happen in the hole punch case. * Getting here in a truncate operation is a bug. */ if (unlikely(page_mapped(page))) { BUG_ON(truncate_op); In this case, the elevated map count is not the result of a race. Rather it was incorrectly incremented as the result of a bug in the huge pmd sharing code. Consider the following: - Process A maps a hugetlbfs file of sufficient size and alignment (PUD_SIZE) that a pmd page could be shared. - Process B maps the same hugetlbfs file with the same size and alignment such that a pmd page is shared. - Process B then calls mprotect() to change protections for the mapping with the shared pmd. As a result, the pmd is 'unshared'. - Process B then calls mprotect() again to chage protections for the mapping back to their original value. pmd remains unshared. - Process B then forks and process C is created. During the fork process, we do dup_mm -> dup_mmap -> copy_page_range to copy page tables. Copying page tables for hugetlb mappings is done in the routine copy_hugetlb_page_range. In copy_hugetlb_page_range(), the destination pte is obtained by: dst_pte = huge_pte_alloc(dst, addr, sz); If pmd sharing is possible, the returned pointer will be to a pte in an existing page table. In the situation above, process C could share with either process A or process B. Since process A is first in the list, the returned pte is a pointer to a pte in process A's page table. However, the check for pmd sharing in copy_hugetlb_page_range is: /* If the pagetables are shared don't copy or take references */ if (dst_pte == src_pte) continue; Since process C is sharing with process A instead of process B, the above test fails. The code in copy_hugetlb_page_range which follows assumes dst_pte points to a huge_pte_none pte. It copies the pte entry from src_pte to dst_pte and increments this map count of the associated page. This is how we end up with an elevated map count. To solve, check the dst_pte entry for huge_pte_none. If !none, this implies PMD sharing so do not copy. Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com Fixes: c5c99429fa57 ("fix hugepages leak due to pagetable page sharing") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22configfs: replace strncpy with memcpyGuenter Roeck
commit 1823342a1f2b47a4e6f5667f67cd28ab6bc4d6cd upstream. gcc 8.1.0 complains: fs/configfs/symlink.c:67:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/configfs/symlink.c: In function 'configfs_get_link': fs/configfs/symlink.c:63:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22fuse: fix leaked notify replyMiklos Szeredi
commit 7fabaf303458fcabb694999d6fa772cc13d4e217 upstream. fuse_request_send_notify_reply() may fail if the connection was reset for some reason (e.g. fs was unmounted). Don't leak request reference in this case. Besides leaking memory, this resulted in fc->num_waiting not being decremented and hence fuse_wait_aborted() left in a hanging and unkillable state. Fixes: 2d45ba381a74 ("fuse: add retrieve request") Fixes: b8f95e5d13f5 ("fuse: umount should wait for all requests") Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org> #v2.6.36 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22sunrpc: correct the computation for page_ptr when truncatingFrank Sorenson
commit 5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream. When truncating the encode buffer, the page_ptr is getting advanced, causing the next page to be skipped while encoding. The page is still included in the response, so the response contains a page of bogus data. We need to adjust the page_ptr backwards to ensure we encode the next page into the correct place. We saw this triggered when concurrent directory modifications caused nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting call to xdr_truncate_encode() corrupted the READDIR reply. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mount: Prevent MNT_DETACH from disconnecting locked mountsEric W. Biederman
commit 9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream. Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A" > /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mountsEric W. Biederman
commit df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream. Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mount: Retest MNT_LOCKED in do_umountEric W. Biederman
commit 25d202ed820ee347edec0bf3bf553544556bf64b upstream. It was recently pointed out that the one instance of testing MNT_LOCKED outside of the namespace_sem is in ksys_umount. Fix that by adding a test inside of do_umount with namespace_sem and the mount_lock held. As it helps to fail fails the existing test is maintained with an additional comment pointing out that it may be racy because the locks are not held. Cc: stable@vger.kernel.org Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: fix buffer leak in __ext4_read_dirblock() on error pathVasily Averin
commit de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream. Fixes: dc6982ff4db1 ("ext4: refactor code to read directory blocks ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.9 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: fix buffer leak in ext4_xattr_move_to_block() on error pathVasily Averin
commit 6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream. Fixes: 3f2571c1f91f ("ext4: factor out xattr moving") Fixes: 6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...") Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.23 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: release bs.bh before re-using in ext4_xattr_block_find()Vasily Averin
commit 45ae932d246f721e6584430017176cbcadfde610 upstream. bs.bh was taken in previous ext4_xattr_block_find() call, it should be released before re-using Fixes: 7e01c8e5420b ("ext3/4: fix uninitialized bs in ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.26 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: fix possible leak of sbi->s_group_desc_leak in error pathTheodore Ts'o
commit 9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream. Fixes: bfe0a5f47ada ("ext4: add more mount time checks of the superblock") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 4.18 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: avoid possible double brelse() in add_new_gdb() on error pathTheodore Ts'o
commit 4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream. Fixes: b40971426a83 ("ext4: add error checking to calls to ...") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.38 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizingVasily Averin
commit f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream. Fixes: 117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: avoid buffer leak in ext4_orphan_add() after prior errorsVasily Averin
commit feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream. Fixes: d745a8c20c1f ("ext4: reduce contention on s_orphan_lock") Fixes: 6e3617e579e0 ("ext4: Handle non empty on-disk orphan link") Cc: Dmitry Monakhov <dmonakhov@gmail.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.34 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: fix possible inode leak in the retry loop of ext4_resize_fs()Vasily Averin
commit db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream. Fixes: 1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: avoid potential extra brelse in setup_new_flex_group_blocks()Vasily Averin
commit 9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream. Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.3+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: add missing brelse() add_new_gdb_meta_bg()'s error pathVasily Averin
commit 61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream. Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 3.7 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: add missing brelse() in set_flexbg_block_bitmap()'s error pathVasily Averin
commit cea5794122125bf67559906a0762186cf417099c upstream. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Cc: stable@kernel.org # 3.3 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ext4: add missing brelse() update_backups()'s error pathVasily Averin
commit ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream. Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org # 2.6.19 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22arch/alpha, termios: implement BOTHER, IBSHIFT and termios2H. Peter Anvin (Intel)
commit d0ffb805b729322626639336986bc83fc2e60871 upstream. Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags using arbitrary flags. Because BOTHER is not defined, the general Linux code doesn't allow setting arbitrary baud rates, and because CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037. Resolve both problems by #defining BOTHER to 037 on Alpha. However, userspace still needs to know if setting BOTHER is actually safe given legacy kernels (does anyone actually care about that on Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even though they use the same structure. Define struct termios2 just for compatibility; it is the exact same structure as struct termios. In a future patchset, this will be cleaned up so the uapi headers are usable from libc. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: <linux-alpha@vger.kernel.org> Cc: <linux-serial@vger.kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22termios, tty/tty_baudrate.c: fix buffer overrunH. Peter Anvin
commit 991a25194097006ec1e0d2e0814ff920e59e3465 upstream. On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Requested-by: Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mtd: docg3: don't set conflicting BCH_CONST_PARAMS optionArnd Bergmann
commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream. I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entryChangwei Ge
commit 29aa30167a0a2e6045a0d6d2e89d8168132333d5 upstream. Somehow, file system metadata was corrupted, which causes ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el(). According to the original design intention, if above happens we should skip the problematic block and continue to retrieve dir entry. But there is obviouse misuse of brelse around related code. After failure of ocfs2_check_dir_entry(), current code just moves to next position and uses the problematic buffer head again and again during which the problematic buffer head is released for multiple times. I suppose, this a serious issue which is long-lived in ocfs2. This may cause other file systems which is also used in a the same host insane. So we should also consider about bakcporting this patch into linux -stable. Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mach64: fix image corruption due to reading accelerator registersMikulas Patocka
commit c09bcc91bb94ed91f1391bffcbe294963d605732 upstream. Reading the registers without waiting for engine idle returns unpredictable values. These unpredictable values result in display corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would never ever clear the bit, resulting in display corruption. We don't want to wait for idle because it would degrade performance, so this patch modifies the driver so that it never reads accelerator registers. HOST_CNTL doesn't have to be read, we can just write it with HOST_BYTE_ALIGN because no other part of the driver cares if HOST_BYTE_ALIGN is set. DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect with the default value and in atyfb_imageblit with the value set according to the source image data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Ville Syrjälä <syrjala@sci.fi> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-22mach64: fix display corruption on big endian machinesMikulas Patocka
commit 3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream. The code for manual bit triple is not endian-clean. It builds the variable "hostdword" using byte accesses, therefore we must read the variable with "le32_to_cpu". The patch also enables (hardware or software) bit triple only if the image is monochrome (image->depth). If we want to blit full-color image, we shouldn't use the triple code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Ville Syrjälä <syrjala@sci.fi> Cc: stable@vger.kernel.org Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 23:39:19 +0000