summaryrefslogtreecommitdiff
path: root/drivers/mtd/mtdcore.c
AgeCommit message (Collapse)Author
2012-03-27mtd: remove retlen zeroing duplicationArtem Bityutskiy
The MTD API function now zero the 'retlen' parameter before calling the driver's method — do not do this again in drivers. This removes duplicated '*retlen = 0' assignent from the following methods: 'mtd_point()' 'mtd_read()' 'mtd_write()' 'mtd_writev()' 'mtd_panic_write()' Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: remove R/O checking duplicationArtem Bityutskiy
Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: add offset and length checks to the API functionArtem Bityutskiy
Add verification of the offset and length to MTD API functions and verify that MTD device offset and length are within MTD device size. The modified API functions are: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch also uninlines these functions and exports in mtdcore.c because they are not performance-critical and do not have to be inlined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: mtdcore: remove unnecessary mtd->resume checkBrian Norris
We don't need to to check for mtd->resume before calling mtd_resume(). mtd_resume() should take care of that. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: add leading underscore to all mtd functionsArtem Bityutskiy
This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: mtdcore: Fix build warning when CONFIG_MTD_CHAR is not definedFabio Estevam
Fix the following build warning: drivers/mtd/mtdcore.c: In function ‘mtd_release’: drivers/mtd/mtdcore.c:110: warning: unused variable ‘mtd’ This happens when neither CONFIG_MTD_CHAR nor CONFIG_MTD_CHAR_MODULE are defined. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-30mtd: fix MTD suspendArtem Bityutskiy
Commits 3fe4bae88460869a8e553397cd9057a4ee7ca341 and 079c985e7a6f4ce60f931cebfdd5ee3c3 broke MTD suspend in 2 ways: 1. When the '->suspend' method is not present, we return -EOPNOTSUPP, but the callers of 'mtd_suspend()' expects 0 instead. 2. Checking of the 'mtd' parameter against NULL has been incorrectly removed in 'mtd_cls_suspend()'. This patch fixes the breakages. This has been found, analyzed, reported and tested by Rafael J. Wysocki <rjw@sisk.pl>. Note, this patch is not needed in the stable tree because it causes a regression introduced during the v3.3 merge window. Reported-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->suspend and mtd->resume directlyArtem Bityutskiy
Just call the 'mtd_suspend()' and 'mtd_resume()' - they will do nothing if the operation is not defined. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->lock, unlock and is_locked directlyArtem Bityutskiy
Instead, call the corresponding MTD API function which will return '-EOPNOTSUPP' if the operation is not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: harmonize mtd_writev usageArtem Bityutskiy
This patch makes the 'mtd_writev()' function more usable and logical. We first teach it to fall-back to the 'default_mtd_writev()' function if the MTD driver does not define its own '->writev()' method. Then we make block2mtd and JFFS2 just 'mtd_writev()' instead of 'default_mtd_writev()' function. This means we can now stop exporting 'default_mtd_writev()' and instead, export 'mtd_writev()'. This is much cleaner and more logical, as well as allows us to get read of another direct 'mtd->writev' access in JFFS2. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: mtdcore: export symbols cleanupArtem Bityutskiy
The mtdcore.c file is a bit inconsistent - some EXPORT_SYMBOL_GPL declarations follow the corresponding functions, some are placed at the end. This patch harmonizes the file so that EXPORT_SYMBOL_GPL declarations follow the corresponding function. It also removes few extra newlines and trailing white-spaces. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: clean-up the default_mtd_writev functionArtem Bityutskiy
1. Teach 'mtd_write()' function to return '-EROFS' if the write method is undefined, and remove the corresponding check from 'default_mtd_writev()'. 2. Do not test 'retlen' for NULL - it cannot be NULL. 3. Few minor coding stile clean-ups. 4. Add a kerneldoc comment Additionally, minor fixes to the kerneldoc comments of the neighbor function. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: kill dev_to_mtd helperArtem Bityutskiy
... since it is not needed because the generic 'dev_get_drvdata()' can be used instead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_resume interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_suspend interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_unlock interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-09-11mtd: check parts pointer before using itJason Liu
The code has the check for parts but it called after kmemdup, kmemdup(parts, sizeof(*parts) * nr_parts,...) if (!parts) return -ENOMEM In fact, we need check parts before safely using it. and we also need check the real_parts to make sure kmemdup allocation sucessfully. Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: spelling fixesBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: replace DEBUG() with pr_debug()Brian Norris
Start moving away from the MTD_DEBUG_LEVEL messages. The dynamic debugging feature is a generic kernel feature that provides more flexibility. (See Documentation/dynamic-debug-howto.txt) Also fix some punctuation, indentation, and capitalization that went along with the affected lines. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: drop mtd_device_registerDmitry Eremin-Solenikov
mtd_device_register() is a limited version of mtd_device_parse_register. Replace it with macro calling mtd_device_parse_register(). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-09-11mtd: abstract last MTD partition parser argumentDmitry Eremin-Solenikov
Encapsulate last MTD partition parser argument into a separate structure. Currently it holds only 'origin' field for RedBoot parser, but will be extended in future to contain at least device_node for OF devices. Amended commentary to make kerneldoc happy Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-09-11mtd: add new API for handling MTD registrationDmitry Eremin-Solenikov
Lots (nearly all) mtd drivers contain nearly the similar code that calls parse_mtd_partitions, provides some platform-default values, if parsing fails, and registers mtd device. This is an aim to provide single implementation of this scenario: mtd_device_parse_register() which will handle all this parsing and defaults. Artem: amended comments Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-25mtd: remove add_mtd_partitions, add_mtd_device and friendsJamie Iles
These symbols are replaced with mtd_device_register() (and removal with mtd_device_unregister()) for public registration. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: introduce mtd_device_(un)register()Jamie Iles
To prepare for the removal of add_mtd_device and add_mtd_partitions(), introduce mtd_device_register(). This will create partitions if they are supplied or register the whole device if there are no partitions. Once all drivers are converted to use mtd_device_register(), add_mtd_device() and add_mtd_partitions() will be made internal only. v2: move kerneldoc to implementation file and fixup some kerneldoc warnings. Artem: tweak comments: remove junk tabs, use dots consistently. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd:fix the bad format in the mtdcore.cWanlong Gao
Remove the spare spaces in the head of the lines. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: simplify get_mtd_device_nm functionWanlong Gao
'get_mtd_device_nm()' has a piece of code which equivalent to what '__get_mtd_device()' does - remove this duplicated code and use ''__get_mtd_device()' instead. Artem: changed commit message. Artem: while on it, remove an unnecessary extra empty line Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: convert to seq_file interfaceAlexey Dobriyan
->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-05-25mtd: create function to perform large allocationsGrant Erickson
Introduce a common function to handle large, contiguous kmalloc buffer allocations by exponentially backing off on the size of the requested kernel transfer buffer until it succeeds or until the requested transfer buffer size falls below the page size. This helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Artem: so this patch solves the problem that the kernel tries to kmalloc too large buffers, which (a) may fail and does fail - people complain about this, and (b) slows down the system in case of high memory fragmentation, because the kernel starts dropping caches, writing back, swapping, etc. But we do not really have to allocate a lot of memory to do the I/O, we may do this even with as little as one min. I/O unit (NAND page) of RAM. So the idea of this patch is that if the user asks to read or write a lot, we try to kmalloc a lot, with GFP flags which make the kernel _not_ drop caches, etc. If we can allocate it - good, if not - we try to allocate twice as less, and so on, until we reach the min. I/O unit size, which is our last resort allocation and use the normal GFP_KERNEL flag. Artem: re-write the allocation function so that it makes sure the allocated buffer is aligned to the min. I/O size of the flash. Signed-off-by: Grant Erickson <marathon96@gmail.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: local symbols should be staticH Hartley Sweeten
The three backing_dev_info symbols are only used in this file and should be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Remove obsolete <mtd/compatmac.h> includeDavid Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Update copyright noticesDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-05-19mtd: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-10Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/mtdcore.c Pull in the bdi fixes and ARM platform changes that other outstanding patches depend on.
2010-04-27mtd: ensure that bdi entries are properly initialized and registeredJens Axboe
They will be holding dirty inodes and be responsible for flushing them out, so they need to be setup properly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-27Move mtd_bdi_*mappable to mtdcore.cJörn Engel
Removes one .h and one .c file that are never used outside of mtdcore.c. Signed-off-by: Joern Engel <joern@logfs.org> Edited to remove on leftover debug define. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26mtd: call the remove notifiers before assuming it is in useMaxim Levitsky
Now that mtd block common layer is prepared for proper hotplug support, enable it here Now all users of the mtd device have a chance to put the mtd device when they are notified to do so, and they have to do so to make hotplug work. [dwmw2: There's more work to be done to fix hotplug in the general case, but this is a reasonable start] Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-26mtd: create unlocked versions of {get,put}_mtd_deviceMaxim Levitsky
Use these only if you know that you already hold mtd_table_mutex Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25mtd: Replace static array of devices with an idr structureBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25mtd: Introduce and use iteration macro for reading the MTD device tableBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-30mtd: ensure index is positiveRoel Kluin
The index is signed, make sure it is not negative when we read the array element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-20Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/mtdcore.c Merged in order that I can apply the Nomadik nand/onenand support patches.
2009-09-15driver model: constify attribute groupsDavid Brownell
Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-04mtd: make few symbols staticH Hartley Sweeten
Make mtd_group and mtd_groups static since they are only used in this file. [Amended by Artem Bityutskiy] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-08-03mtd: fix the conversion from dev to mtd_infoSaeed Bishara
The patch fixes a bug when converting dev to mtd_info by using the drvdata of the dev, the previous code used container_of(dev, struct mtd_info, dev), but won't work for the mtdXro devices as they created without being contained inside mtd_info structure. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-26[MTD] Restore suspend/resume support for mtd devicesDavid Woodhouse
This is intended to suspend/resume the _chip_, while we leave board drivers to handle their own suspend/resume for the controller. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-19mtd: expose subpage size via sysfsArtem Bityutskiy
MTD has got sysfs support in 2.6.30-rc1. But subpage size is not exposed there - do this. UBI utilities badly need this parameter. At the moment there is no way to get subpage size - ioctls do not return it. And we just got sysfs support, so we can easilly extend it with this additional parameter. This can be merged late in the development cycle because: 1. sysfs support has been just added - there are no users for it so far, even. 2. UBI utilities really need this parameter, and it is better not to delay this. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-19mtd: mtd in mtd_release is unused without CONFIG_MTD_CHARDenis V. Lunev
drivers/mtd/mtdcore.c: In function 'mtd_release': drivers/mtd/mtdcore.c:51: warning: unused variable 'mtd' [akpm: make it actually build] Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04[MTD] sysfs support should not depend on CONFIG_PROC_FSKevin Cernekee
Move the driver model init code out of the "#ifdef CONFIG_PROC_FS" block. Tested with both values of CONFIG_PROC_FS . Tested with CONFIG_MTD=m . Issue was reported here: http://lkml.org/lkml/2009/4/4/107 Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 03:15:59 +0000