diff options
184 files changed, 17726 insertions, 1185 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid deleted file mode 100644 index ffb9536f6ecc..000000000000 --- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid +++ /dev/null @@ -1,22 +0,0 @@ -What: /sys/devices/*/<our-device>/eeprom -Date: August 2013 -Contact: Oliver Schinagl <oliver@schinagl.nl> -Description: read-only access to the SID (Security-ID) on current - A-series SoC's from Allwinner. Currently supports A10, A10s, A13 - and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes, - whereas the newer A20 SoC exposes 512 bytes split into sections. - Besides the 16 bytes of SID, there's also an SJTAG area, - HDMI-HDCP key and some custom keys. Below a quick overview, for - details see the user manual: - 0x000 128 bit root-key (sun[457]i) - 0x010 128 bit boot-key (sun7i) - 0x020 64 bit security-jtag-key (sun7i) - 0x028 16 bit key configuration (sun7i) - 0x02b 16 bit custom-vendor-key (sun7i) - 0x02c 320 bit low general key (sun7i) - 0x040 32 bit read-control access (sun7i) - 0x064 224 bit low general key (sun7i) - 0x080 2304 bit HDCP-key (sun7i) - 0x1a0 768 bit high general key (sun7i) -Users: any user space application which wants to read the SID on - Allwinner's A-series of CPU's. diff --git a/Documentation/devicetree/bindings/arm/msm/ids.txt b/Documentation/devicetree/bindings/arm/msm/ids.txt new file mode 100644 index 000000000000..9ee8428f4670 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/ids.txt @@ -0,0 +1,65 @@ +* MSM-ID + +The qcom,msm-id entry specifies the MSM chipset and hardware revision. It can +optionally be an array of these to indicate multiple hardware that use the same +device tree. It is expected that the bootloader will use this information at +boot-up to decide which device tree to use when given multiple device trees, +some of which may not be compatible with the actual hardware. It is the +bootloader's responsibility to pass the correct device tree to the kernel. + +PROPERTIES + +- qcom,msm-id: + Usage: required + Value type: <prop-encoded-array> (<chipset_id, rev_id> [, <c2, r2> ..]) + Definition: + The "chipset_id" consists of three fields as below: + + bits 0-15 = The unique MSM chipset id. + bits 16-31 = Reserved. Should be 0 + + chipset_id is an exact match value + + The "rev_id" is a chipset specific 32-bit id that represents + the version of the chipset. + + The rev_id is a best match id. The bootloader will look for + the closest possible patch. + +* BOARD-ID + +The qcom,board-id entry specifies the board type and revision information. It +can optionally be an array of these to indicate multiple boards that use the +same device tree. It is expected that the bootloader will use this information +at boot-up to decide which device tree to use when given multiple device trees, +some of which may not be compatible with the actual hardware. It is the +bootloader's responsibility to pass the correct device tree to the kernel. + +PROPERTIES + +- qcom,board-id: + Usage: required + Value type: <prop-encoded-array> (<board_id, subtype_id> [, <b2, s2> ..]) + Definition: + The "board_id" consists of three fields as below: + + bits 31-24 = Unusued. + bits 23-16 = Platform Version Major + bits 15-8 = Platfrom Version Minor + bits 7-0 = Platform Type + + Platform Type field is an exact match value. The Platform + Major/Minor field is a best match. The bootloader will look + for the closest possible match. + + The "subtype_id" is unique to a Platform Type/Chipset ID. For + a given Platform Type, there will typically only be a single + board and the subtype_id will be 0. However in some cases board + variants may need to be distinquished by different subtype_id + values. + + subtype_id is an exact match value. + +EXAMPLE: + qcom,board-id = <15 2>; + qcom,msm-id = <0x1007e 0>; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt new file mode 100644 index 000000000000..06df04cc827a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt @@ -0,0 +1,84 @@ +QCOM Idle States for cpuidle driver + +ARM provides idle-state node to define the cpuidle states, as defined in [1]. +cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle +states. Idle states have different enter/exit latency and residency values. +The idle states supported by the QCOM SoC are defined as - + + * Standby + * Retention + * Standalone Power Collapse (Standalone PC or SPC) + * Power Collapse (PC) + +Standby: Standby does a little more in addition to architectural clock gating. +When the WFI instruction is executed the ARM core would gate its internal +clocks. In addition to gating the clocks, QCOM cpus use this instruction as a +trigger to execute the SPM state machine. The SPM state machine waits for the +interrupt to trigger the core back in to active. This triggers the cache +hierarchy to enter standby states, when all cpus are idle. An interrupt brings +the SPM state machine out of its wait, the next step is to ensure that the +cache hierarchy is also out of standby, and then the cpu is allowed to resume +execution. This state is defined as a generic ARM WFI state by the ARM cpuidle +driver and is not defined in the DT. The SPM state machine should be +configured to execute this state by default and after executing every other +state below. + +Retention: Retention is a low power state where the core is clock gated and +the memory and the registers associated with the core are retained. The +voltage may be reduced to the minimum value needed to keep the processor +registers active. The SPM should be configured to execute the retention +sequence and would wait for interrupt, before restoring the cpu to execution +state. Retention may have a slightly higher latency than Standby. + +Standalone PC: A cpu can power down and warmboot if there is a sufficient time +between the time it enters idle and the next known wake up. SPC mode is used +to indicate a core entering a power down state without consulting any other +cpu or the system resources. This helps save power only on that core. The SPM +sequence for this idle state is programmed to power down the supply to the +core, wait for the interrupt, restore power to the core, and ensure the +system state including cache hierarchy is ready before allowing core to +resume. Applying power and resetting the core causes the core to warmboot +back into Elevation Level (EL) which trampolines the control back to the +kernel. Entering a power down state for the cpu, needs to be done by trapping +into a EL. Failing to do so, would result in a crash enforced by the warm boot +code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to +be flushed in s/w, before powering down the core. + +Power Collapse: This state is similar to the SPC mode, but distinguishes +itself in that the cpu acknowledges and permits the SoC to enter deeper sleep +modes. In a hierarchical power domain SoC, this means L2 and other caches can +be flushed, system bus, clocks - lowered, and SoC main XO clock gated and +voltages reduced, provided all cpus enter this state. Since the span of low +power modes possible at this state is vast, the exit latency and the residency +of this low power mode would be considered high even though at a cpu level, +this essentially is cpu power down. The SPM in this state also may handshake +with the Resource power manager (RPM) processor in the SoC to indicate a +complete application processor subsystem shut down. + +The idle-state for QCOM SoCs are distinguished by the compatible property of +the idle-states device node. + +The devicetree representation of the idle state should be - + +Required properties: + +- compatible: Must be one of - + "qcom,idle-state-ret", + "qcom,idle-state-spc", + "qcom,idle-state-pc", + and "arm,idle-state". + +Other required and optional properties are specified in [1]. + +Example: + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + +[1]. Documentation/devicetree/bindings/arm/idle-states.txt diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt index 1333db9acfee..382a574a5c55 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt @@ -21,10 +21,17 @@ PROPERTIES the register region. An optional second element specifies the base address and size of the alias register region. +- clock-output-names: + Usage: optional + Value type: <string> + Definition: Name of the output clock. Typically acpuX_aux where X is a + CPU number starting at 0. + Example: clock-controller@2088000 { compatible = "qcom,kpss-acc-v2"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt new file mode 100644 index 000000000000..d1e12f16a28c --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt @@ -0,0 +1,28 @@ +Krait Processor Sub-system (KPSS) Global Clock Controller (GCC) + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: should be one of: + "qcom,kpss-gcc" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: base address and size of the register region + +- clock-output-names: + Usage: required + Value type: <string> + Definition: Name of the output clock. Typically acpu_l2_aux indicating + an L2 cache auxiliary clock. + +Example: + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt new file mode 100644 index 000000000000..e7cb10426a3b --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt @@ -0,0 +1,38 @@ +Qualcomm Process Voltage Scaling Tables + +The node name is required to be "qcom,pvs". There shall only be one +such node present in the root of the tree. + +PROPERTIES + +- qcom,pvs-format-a or qcom,pvs-format-b: + Usage: required + Value type: <empty> + Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties. + If qcom,pvs-format-a is used the table is two columns + (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage, + and current in that order). + +- qcom,speedX-pvsY-bin-vZ: + Usage: required + Value type: <prop-encoded-array> + Definition: The PVS table corresponding to the speed bin X, pvs bin Y, + and version Z. +Example: + + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 975000 >, + < 594000000 1000000 >, + < 702000000 1025000 >, + < 810000000 1075000 >, + < 918000000 1100000 >, + < 1026000000 1125000 >, + < 1134000000 1175000 >, + < 1242000000 1200000 >, + < 1350000000 1225000 >, + < 1458000000 1237500 >, + < 1512000000 1250000 >; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt index 1505fb8e131a..ae4afc6dcfe0 100644 --- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt +++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt @@ -2,22 +2,31 @@ SPM AVS Wrapper 2 (SAW2) The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable -micro-controller that transitions a piece of hardware (like a processor or +power-controller that transitions a piece of hardware (like a processor or subsystem) into and out of low power modes via a direct connection to the PMIC. It can also be wired up to interact with other processors in the system, notifying them when a low power state is entered or exited. +Multiple revisions of the SAW hardware are supported using these Device Nodes. +SAW2 revisions differ in the register offset and configuration data. Also, the +same revision of the SAW in different SoCs may have different configuration +data due the the differences in hardware capabilities. Hence the SoC name, the +version of the SAW hardware in that SoC and the distinction between cpu (big +or Little) or cache, may be needed to uniquely identify the SAW register +configuration and initialization data. The compatible string is used to +indicate this parameter. + PROPERTIES - compatible: Usage: required Value type: <string> - Definition: shall contain "qcom,saw2". A more specific value should be - one of: - "qcom,saw2-v1" - "qcom,saw2-v1.1" - "qcom,saw2-v2" - "qcom,saw2-v2.1" + Definition: Must have + "qcom,saw2" + A more specific value could be one of: + "qcom,apq8064-saw2-v1.1-cpu" + "qcom,msm8974-saw2-v2.1-cpu" + "qcom,apq8084-saw2-v2.1-cpu" - reg: Usage: required @@ -26,10 +35,23 @@ PROPERTIES the register region. An optional second element specifies the base address and size of the alias register region. +- regulator: + Usage: optional + Value type: boolean + Definition: Indicates that this SPM device acts as a regulator device + device for the core (CPU or Cache) the SPM is attached + to. -Example: +Example 1: - regulator@2099000 { + power-controller@2099000 { compatible = "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + +Example 2: + saw0: power-controller@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index aba3d254e037..54c23f34f194 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -8,6 +8,7 @@ Required properties : "qcom,gcc-apq8084" "qcom,gcc-ipq8064" "qcom,gcc-msm8660" + "qcom,gcc-msm8916" "qcom,gcc-msm8960" "qcom,gcc-msm8974" "qcom,gcc-msm8974pro" diff --git a/Documentation/devicetree/bindings/clock/qcom,hfpll.txt b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt new file mode 100644 index 000000000000..fee92bb30344 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt @@ -0,0 +1,40 @@ +High-Frequency PLL (HFPLL) + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be "qcom,hfpll" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address and size of HPLL registers. An optional second + element specifies the address and size of the alias + register region. + +- clock-output-names: + Usage: required + Value type: <string> + Definition: Name of the PLL. Typically hfpllX where X is a CPU number + starting at 0. Otherwise hfpll_Y where Y is more specific + such as "l2". + +Example: + +1) An HFPLL for the L2 cache. + + clock-controller@f9016000 { + compatible = "qcom,hfpll"; + reg = <0xf9016000 0x30>; + clock-output-names = "hfpll_l2"; + }; + +2) An HFPLL for CPU0. This HFPLL has the alias register region. + + clock-controller@f908a000 { + compatible = "qcom,hfpll"; + reg = <0xf908a000 0x30>, <0xf900a000 0x30>; + clock-output-names = "hfpll0"; + }; diff --git a/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt new file mode 100644 index 000000000000..874138f88ec6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt @@ -0,0 +1,22 @@ +Krait Clock Controller + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,krait-cc-v1" + "qcom,krait-cc-v2" + +- #clock-cells: + Usage: required + Value type: <u32> + Definition: must be 1 + +Example: + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/eeprom/allwinner,sunxi-sid.txt index fabdf64a5737..cceaaf6e45e3 100644 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/eeprom/allwinner,sunxi-sid.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/eeprom/eeprom.txt + Example for sun4i: sid@01c23800 { compatible = "allwinner,sun4i-a10-sid"; diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt new file mode 100644 index 000000000000..8348d18a9e57 --- /dev/null +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -0,0 +1,70 @@ += EEPROM Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in EEPROMs. + +On a significant proportion of boards, the manufacturer has stored +some data on an EEPROM-like device, for the OS to be able to retrieve +these information and act upon it. Obviously, the OS has to know +about where to retrieve these data from, and where they are stored on +the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +to this node. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in eeprom provider. + +Required properties: +reg: specifies the offset in byte within that storage device, and the length + in bytes of the data we care about. + There could be more then one offset-length pairs in this property. + +Optional properties: +As required by specific data parsers/interpreters. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x1000>; + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + serial_number: sn { + reg = <0x104 0x4>, <0x204 0x4>, <0x30c 0x4>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume eeprom data cells. + +Required properties: + +eeproms: List of phandle and data cell the device might be interested in. + +Optional properties: + +eeprom-names: List of data cell name strings sorted in the same order + as the eeproms property. Consumers drivers will use + eeprom-names to differentiate between multiple cells, + and hence being able to know what these cells are for. + +For example: + + tsens { + ... + eeproms = <&tsens_calibration>; + eeprom-names = "calibration"; + }; diff --git a/Documentation/devicetree/bindings/eeprom/qfprom.txt b/Documentation/devicetree/bindings/eeprom/qfprom.txt new file mode 100644 index 000000000000..d5baed6c92cc --- /dev/null +++ b/Documentation/devicetree/bindings/eeprom/qfprom.txt @@ -0,0 +1,23 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/eeprom/eeprom.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x1000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt new file mode 100644 index 000000000000..b368d45703a4 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt @@ -0,0 +1,43 @@ +USB GPIO Extcon device + +This is a virtual device used to generate USB cable states from the USB +ID and VBUS signals connected to GPIO pins. + +The extcon cable states USB and USB_HOST are actually VBUS and !ID +pin states and do not indicate what mode the USB needs to operate in. +That decision is done by the USB stack. + +Some devices have only one of these GPIO pins, so we support cases when +only one of them is present. Hence properties 'id-gpio' and 'vbus-gpio' +are described as optional, but at least one of them has to be present +in extcon-usb-gpio node. + +In general we have three cases: +1. If VBUS and ID gpios are present we pass them as is + USB-HOST = !ID, USB = VBUS +2. If only VBUS gpio is present we assume that ID pin is always High. + USB-HOST = false, USB = VBUS. +3. If only ID pin is available we infer the VBUS pin states based on ID. + USB-HOST = !ID, USB = ID + +Required properties: +- compatible: Should be "linux,extcon-usb-gpio" + +Optional properties +- id-gpio: gpio for USB ID pin. See gpio binding. +- vbus-gpio: gpio for USB VBUS pin. See gpio binding. +- debounce: gpio debounce time in milliseconds (u32). + + +Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: + extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + vbus-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + debounce = <25>; + } + + &omap_dwc3_1 { + + extcon = <&extcon_usb1>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 7ed08048516a..1ae63c0acd40 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -10,6 +10,7 @@ PMIC's from Qualcomm. "qcom,pm8018-gpio" "qcom,pm8038-gpio" "qcom,pm8058-gpio" + "qcom,pm8916-gpio" "qcom,pm8917-gpio" "qcom,pm8921-gpio" "qcom,pm8941-gpio" @@ -74,6 +75,7 @@ to specify in a pin configuration subnode: gpio1-gpio6 for pm8018 gpio1-gpio12 for pm8038 gpio1-gpio40 for pm8058 + gpio1-gpio4 for pm8916 gpio1-gpio38 for pm8917 gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index 854774b194ed..ed19991aad35 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -8,6 +8,7 @@ of PMIC's from Qualcomm. Value type: <string> Definition: Should contain one of: "qcom,pm8841-mpp", + "qcom,pm8916-mpp", "qcom,pm8941-mpp", "qcom,pma8084-mpp", @@ -67,6 +68,7 @@ to specify in a pin configuration subnode: Definition: List of MPP pins affected by the properties specified in this subnode. Valid pins are: mpp1-mpp4 for pm8841 + mpp1-mpp4 for pm8916 mpp1-mpp8 for pm8941 mpp1-mpp4 for pma8084 diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt index 715d0998af8e..e16b9b5afc70 100644 --- a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt @@ -1,6 +1,6 @@ Qualcomm SPMI Controller (PMIC Arbiter) -The SPMI PMIC Arbiter is found on the Snapdragon 800 Series. It is an SPMI +The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI controller with wrapping arbitration logic to allow for multiple on-chip devices to control a single SPMI master. @@ -19,6 +19,10 @@ Required properties: "core" - core registers "intr" - interrupt controller registers "cnfg" - configuration registers + Registers used only for V2 PMIC Arbiter: + "chnls" - tx-channel per virtual slave registers. + "obsrvr" - rx-channel (called observer) per virtual slave registers. + - reg : address + size pairs describing the PMIC arb register sets; order must correspond with the order of entries in reg-names - #address-cells : must be set to 2 diff --git a/MAINTAINERS b/MAINTAINERS index efbcb50e4969..6f026ca1b7d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1327,6 +1327,7 @@ L: linux-soc@vger.kernel.org S: Maintained F: arch/arm/mach-qcom/ F: drivers/soc/qcom/ +F: drivers/firmware/qcom_scm.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git ARM/RADISYS ENP2611 MACHINE SUPPORT @@ -3728,6 +3729,15 @@ T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained F: sound/usb/misc/ua101.c +EEPROM FRAMEWORK +M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> +M: Maxime Ripard <maxime.ripard@free-electrons.com> +S: Maintained +F: drivers/eeprom/ +F: Documentation/devicetree/bindings/eeprom/ +F: include/linux/eeprom-provider.h +F: include/linux/eeprom-consumer.h + EXTENSIBLE FIRMWARE INTERFACE (EFI) M: Matt Fleming <matt.fleming@intel.com> L: linux-efi@vger.kernel.org diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf4c0c99aa25..a42a3125bf8d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2161,6 +2161,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 5d75666f7f6c..fc8cdadd2cf6 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -1,4 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "CompuLab CM-QS600"; @@ -40,6 +42,77 @@ }; }; + /* OTG */ + usb1_phy:phy@12500000 { + status = "ok"; + }; + + usb3_phy:phy@12520000 { + status = "ok"; + }; + + usb4_phy:phy@12530000 { + status = "ok"; + }; + + gadget1:gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + + usb3: usb@12520000 { + status = "ok"; + }; + + usb4: usb@12530000 { + status = "ok"; + }; + + /* on board fixed 3.3v supply */ + v3p3_pcieclk: v3p3-pcieclk { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci@1b500000 { + status = "ok"; + pcie-clk-supply = <&v3p3_pcieclk>; + avdd-supply = <&pm8921_s3>; + vdd-supply = <&pm8921_lvs6>; + qcom,external-phy-refclk; + reset-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + qcom,ssbi@500000 { + pmicintc: pmic@0 { + pm8921_gpio: gpio@150 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + + sdcc4_pwrseq:pwrseq { + compatible = "mmc-pwrseq-simple"; + /* WLAN reset */ + reset-gpios = <&pm8921_gpio 42 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -53,6 +126,7 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index e641001ca2a7..69ef1816ed7f 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,10 +1,16 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + soc { pinctrl@800000 { i2c1_pins: i2c1 { @@ -14,6 +20,13 @@ }; }; + uart_pins: uart_pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; + card_detect: card_detect { mux { pins = "gpio26"; @@ -41,6 +54,18 @@ }; }; + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart_pins>; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -49,6 +74,86 @@ }; }; + /* OTG */ + usb1_phy:phy@12500000 { + status = "ok"; + }; + + usb3_phy:phy@12520000 { + status = "ok"; + }; + + usb4_phy:phy@12530000 { + status = "ok"; + }; + + gadget1:gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + + usb3: usb@12520000 { + status = "ok"; + }; + + usb4: usb@12530000 { + status = "ok"; + }; + + /* on board fixed 3.3v supply */ + v3p3_pcieclk: v3p3-pcieclk { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pci@1b500000 { + status = "ok"; + pcie-clk-supply = <&v3p3_pcieclk>; + avdd-supply = <&pm8921_s3>; + vdd-supply = <&pm8921_lvs6>; + ext-3p3v-supply = <&ext_3p3v>; + qcom,external-phy-refclk; + reset-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + qcom,ssbi@500000 { + pmicintc: pmic@0 { + pm8921_gpio: gpio@150 { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios &bt_gpios>; + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + bt_gpios: bt-gpio { + pios { + pins = "gpio44"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + sdcc4_pwrseq:pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 42 GPIO_ACTIVE_LOW>, + <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -65,6 +170,8 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + mmc-pwrseq = <&sdcc4_pwrseq>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b3154c071652..9099116fe150 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -1,11 +1,14 @@ /dts-v1/; #include "skeleton.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> +#include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - +#include <dt-bindings/gpio/gpio.h> / { model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; @@ -23,6 +26,10 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + clocks = <&kraitcc 0>; + clock-names = "cpu"; + clock-latency = <100000>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -33,6 +40,10 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + clocks = <&kraitcc 1>; + clock-names = "cpu"; + clock-latency = <100000>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -43,6 +54,10 @@ next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; + clocks = <&kraitcc 2>; + clock-names = "cpu"; + clock-latency = <100000>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -53,12 +68,26 @@ next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; + clocks = <&kraitcc 3>; + clock-names = "cpu"; + clock-latency = <100000>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; }; cpu-pmu { @@ -66,6 +95,222 @@ interrupts = <1 10 0x304>; }; + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 975000 >, + < 594000000 1000000 >, + < 702000000 1025000 >, + < 810000000 1075000 >, + < 918000000 1100000 >; + + qcom,speed0-pvs1-bin-v0 = + < 384000000 900000 >, + < 486000000 925000 >, + < 594000000 950000 >, + < 702000000 975000 >, + < 810000000 1025000 >, + < 918000000 1050000 >; + + qcom,speed0-pvs3-bin-v0 = + < 384000000 850000 >, + < 486000000 875000 >, + < 594000000 900000 >, + < 702000000 925000 >, + < 810000000 975000 >, + < 918000000 1000000 >; + + qcom,speed0-pvs4-bin-v0 = + < 384000000 850000 >, + < 486000000 875000 >, + < 594000000 900000 >, + < 702000000 925000 >, + < 810000000 962500 >, + < 918000000 975000 >; + + qcom,speed1-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 950000 >, + < 594000000 950000 >, + < 702000000 962500 >, + < 810000000 1000000 >, + < 918000000 1025000 >; + + qcom,speed1-pvs1-bin-v0 = + < 384000000 950000 >, + < 486000000 950000 >, + < 594000000 950000 >, + < 702000000 962500 >, + < 810000000 975000 >, + < 918000000 1000000 >; + + qcom,speed1-pvs2-bin-v0 = + < 384000000 925000 >, + < 486000000 925000 >, + < 594000000 925000 >, + < 702000000 925000 >, + < 810000000 937500 >, + < 918000000 950000 >; + + qcom,speed1-pvs3-bin-v0 = + < 384000000 900000 >, + < 486000000 900000 >, + < 594000000 900000 >, + < 702000000 900000 >, + < 810000000 900000 >, + < 918000000 925000 >; + + qcom,speed1-pvs4-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed1-pvs5-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed1-pvs6-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed2-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 950000 >, + < 594000000 950000 >, + < 702000000 950000 >, + < 810000000 962500 >, + < 918000000 975000 >; + + qcom,speed2-pvs1-bin-v0 = + < 384000000 925000 >, + < 486000000 925000 >, + < 594000000 925000 >, + < 702000000 925000 >, + < 810000000 937500 >, + < 918000000 950000 >; + + qcom,speed2-pvs2-bin-v0 = + < 384000000 900000 >, + < 486000000 900000 >, + < 594000000 900000 >, + < 702000000 900000 >, + < 810000000 912500 >, + < 918000000 925000 >; + + qcom,speed2-pvs3-bin-v0 = + < 384000000 900000 >, + < 486000000 900000 >, + < 594000000 900000 >, + < 702000000 900000 >, + < 810000000 900000 >, + < 918000000 912500 >; + + qcom,speed2-pvs4-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed2-pvs5-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed2-pvs6-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed14-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 950000 >, + < 594000000 950000 >, + < 702000000 962500 >, + < 810000000 1000000 >, + < 918000000 1025000 >; + + qcom,speed14-pvs1-bin-v0 = + < 384000000 950000 >, + < 486000000 950000 >, + < 594000000 950000 >, + < 702000000 962500 >, + < 810000000 975000 >, + < 918000000 1000000 >; + + qcom,speed14-pvs2-bin-v0 = + < 384000000 925000 >, + < 486000000 925000 >, + < 594000000 925000 >, + < 702000000 925000 >, + < 810000000 937500 >, + < 918000000 950000 >; + + qcom,speed14-pvs3-bin-v0 = + < 384000000 900000 >, + < 486000000 900000 >, + < 594000000 900000 >, + < 702000000 900000 >, + < 810000000 900000 >, + < 918000000 925000 >; + + qcom,speed14-pvs4-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed14-pvs5-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + + qcom,speed14-pvs6-bin-v0 = + < 384000000 875000 >, + < 486000000 875000 >, + < 594000000 875000 >, + < 702000000 875000 >, + < 810000000 887500 >, + < 918000000 900000 >; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; + + clocks { + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -92,6 +337,20 @@ }; }; + hdmi_pinctrl: hdmi-pinctrl { + mux1 { + pins = "gpio69", "gpio70", "gpio71"; + function = "hdmi"; + bias-pull-up; + drive-strength = <2>; + }; + mux2 { + pins = "gpio72"; + function = "hdmi"; + bias-pull-down; + drive-strength = <16>; + }; + }; ps_hold: ps_hold { mux { pins = "gpio78"; @@ -119,46 +378,63 @@ cpu-offset = <0x80000>; }; + watchdog@208a038 { + compatible = "qcom,kpss-wdt-apq8064"; + reg = <0x0208a038 0x40>; + clocks = <&sleep_clk>; + timeout-sec = <10>; + }; + acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu1_aux"; }; acc2: clock-controller@20a8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu2_aux"; }; acc3: clock-controller@20b8000 { compatible = "qcom,kpss-acc-v1"; reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu3_aux"; }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; + + saw0: power-controller@2089000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; + saw1: power-controller@2099000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw2: regulator@20a9000 { - compatible = "qcom,saw2"; + saw2: power-controller@20a9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; regulator; }; - saw3: regulator@20b9000 { - compatible = "qcom,saw2"; + saw3: power-controller@20b9000 { + compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2"; reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; regulator; }; @@ -205,6 +481,27 @@ }; }; + gsbi6: gsbi@16500000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16500000 0x03>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial1: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x100>, + <0x16500000 0x03>; + interrupts = <0 156 0x0>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -215,7 +512,7 @@ #size-cells = <1>; ranges; - serial@16640000 { + serial0: serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; @@ -226,10 +523,56 @@ }; }; + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <74 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio"; + reg = <0x150>; + interrupts = <192 1>, <193 1>, <194 1>, + <195 1>, <196 1>, <197 1>, + <198 1>, <199 1>, <200 1>, + <201 1>, <202 1>, <203 1>, + <204 1>, <205 1>, <206 1>, + <207 1>, <208 1>, <209 1>, + <210 1>, <211 1>, <212 1>, + <213 1>, <214 1>, <215 1>, + <216 1>, <217 1>, <218 1>, + <219 1>, <220 1>, <221 1>, + <222 1>, <223 1>, <224 1>, + <225 1>, <226 1>, <227 1>, + <228 1>, <229 1>, <230 1>, + <231 1>, <232 1>, <233 1>, + <234 1>, <235 1>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; }; gcc: clock-controller@900000 { @@ -246,6 +589,278 @@ #reset-cells = <1>; }; + apcs: syscon@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + #address-cells = <1>; + #size-cells = <0>; + rpmcc: rpm-clock-controller { + compatible = "qcom,apq8064-rpm-clk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pm8921_s3: pm8921-s3 { + compatible = "qcom,rpm-pm8921-smps"; + reg = <QCOM_RPM_PM8921_SMPS3>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,boot-load = <49360>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + pm8921_s4: pm8921-s4 { + compatible = "qcom,rpm-pm8921-smps"; + reg = <QCOM_RPM_PM8921_SMPS4>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,boot-load = <200000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; + + pm8921_l2: pm8921-l2 { + compatible = "qcom,rpm-pm8921-pldo"; + reg = <QCOM_RPM_PM8921_LDO2>; + +// ??? + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; +// qcom,boot-load = <50000>; + }; + + pm8921_l3: pm8921-l3 { + compatible = "qcom,rpm-pm8921-pldo"; + reg = <QCOM_RPM_PM8921_LDO3>; + + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + qcom,boot-load = <50000>; + }; + + pm8921_l4: pm8921-l4 { + compatible = "qcom,rpm-pm8921-pldo"; + reg = <QCOM_RPM_PM8921_LDO4>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,boot-load = <50000>; + }; + + pm8921_l23: pm8921-l23 { + compatible = "qcom,rpm-pm8921-pldo"; + reg = <QCOM_RPM_PM8921_LDO23>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + qcom,boot-load = <50000>; + regulator-always-on; + }; + + + pm8921_lvs6: pm8921-lvs6 { + compatible = "qcom,rpm-pm8921-switch"; + reg = <QCOM_RPM_PM8921_LVS6>; + regulator-always-on; + }; + + pm8921_lvs7: pm8921-lvs7 { + compatible = "qcom,rpm-pm8921-switch"; + reg = <QCOM_RPM_PM8921_LVS7>; + regulator-always-on; + }; + + pm8921_hdmi_mvs: pm8921-hdmi-mvs { + compatible = "qcom,rpm-pm8921-switch"; + reg = <QCOM_RPM_HDMI_SWITCH>; + regulator-always-on; + bias-pull-down; + }; + + }; + + /* fabric clks handoff */ + fabclk-handoff{ + compatible = "qcom,apq8064-rpmcc-handoff"; + clocks = <&rpmcc QCOM_RPM_APPS_FABRIC_CLK>; + + assigned-clocks = <&rpmcc QCOM_RPM_APPS_FABRIC_CLK>; + assigned-clock-rates = <0x7fffffff>; + }; + + /* PCIE */ + + pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000>, <0x1b502000 0x100>, <0x1b600000 0x80>; + reg-names = "base", "elbi", "parf"; + status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupts = <0 35 0x0 + 0 36 0x0 + 0 37 0x0 + 0 38 0x0 + 0 39 0x0 + 0 238 0x0>; + interrupt-names = "irq1", "irq2", "irq3", "irq4", "iqr5", "msi"; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_REF_CLK>; + clock-names = "core", "iface", "phy"; + + ranges = <0x00000000 0 0 0x0ff00000 0 0x00100000 /* configuration space */ + 0x81000000 0 0 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + }; + + + + usb1_phy:phy@12500000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12500000 0x400>; + interrupts = <0 100 0>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS1_XCVR_CLK>, + <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + + resets = <&gcc USB_HS1_RESET>; + reset-names = "link"; + }; + + usb3_phy:phy@12520000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12520000 0x400>; + interrupts = <0 188 0>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS3_XCVR_CLK>, + <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + + resets = <&gcc USB_HS3_RESET>; + reset-names = "link"; + }; + + usb4_phy:phy@12530000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12530000 0x400>; + interrupts = <0 215 0>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS4_XCVR_CLK>, + <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + + resets = <&gcc USB_HS4_RESET>; + reset-names = "link"; + }; + + gadget1:gadget@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x400>; + status = "disabled"; + dr_mode = "peripheral"; + interrupts = <0 100 0>; + usb-phy = <&usb1_phy>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ehci-host"; + reg = <0x12500000 0x400>; + interrupts = <0 100 0>; + status = "disabled"; + usb-phy = <&usb1_phy>; + }; + + usb3: usb@12520000 { + compatible = "qcom,ehci-host"; + reg = <0x12520000 0x400>; + interrupts = <0 188 0>; + status = "disabled"; + usb-phy = <&usb3_phy>; + }; + + usb4: usb@12530000 { + compatible = "qcom,ehci-host"; + reg = <0x12530000 0x400>; + interrupts = <0 215 0>; + status = "disabled"; + usb-phy = <&usb4_phy>; + }; + + sata_phy0:sata-phy@1b400000{ + compatible = "qcom,apq8064-sata-phy"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + reg = <0x29000000 0x180>; + interrupts = <0 209 0>; + clocks = <&gcc SFAB_SATA_S_H_CLK>, <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + + clock-names = "slave_iface", "iface", + "bus", "rxoob", + "core_pmalive"; + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + target-supply = <&pm8921_s4>; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; @@ -349,5 +964,182 @@ pinctrl-0 = <&sdc4_gpios>; }; }; + + hdmi: qcom,hdmi-tx@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x1000>; + interrupts = <GIC_SPI 79 0>; + clock-names = + "core_clk", + "master_iface_clk", + "slave_iface_clk"; + clocks = + <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-hpd = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; + }; + + gpu: qcom,adreno-3xx@4300000 { + compatible = "qcom,adreno-3xx"; + #stream-id-cells = <16>; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 80 0>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core_clk", + "iface_clk", + "mem_clk", + "mem_iface_clk"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + qcom,chipid = <0x03020002>; + qcom,gpu-pwrlevels { + compatible = "qcom,gpu-pwrlevels"; + qcom,gpu-pwrlevel@0 { + qcom,gpu-freq = <450000000>; + }; + qcom,gpu-pwrlevel@1 { + qcom,gpu-freq = <27000000>; + }; + }; + }; + + panel: auo,b101xtn01 { + compatible = "auo,b101xtn01"; + // lcd1_pwr_en_n: + enable-gpio = <&tlmm_pinmux 36 GPIO_ACTIVE_HIGH>; + }; + + mdp: qcom,mdp@5100000 { + compatible = "qcom,mdp"; + #stream-id-cells = <2>; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 0>; + connectors = <&hdmi>; + gpus = <&gpu>; + qcom,lvds-panel = <&panel>; + clock-names = + "core_clk", + "iface_clk", + "lut_clk", + "src_clk", + "hdmi_clk", + "mdp_clk", + "mdp_axi_clk"; + clocks = + <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc TV_SRC>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>, + <&mmcc MDP_AXI_CLK>; +// vdd-supply = <&footswitch_mdp>; + lvds-vccs-3p3v-supply = <&ext_3p3v>; + lvds-pll-vdda-supply = <&pm8921_l2>; + lvds-vdda-supply = <&pm8921_lvs7>; + }; + + mdp_port0: qcom,iommu@7500000 { + compatible = "qcom,iommu-v0"; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg-names = "physbase"; + reg = <0x07500000 0x100000>; + interrupt-names = + "secure_irq", + "nonsecure_irq"; + interrupts = + <GIC_SPI 63 0>, + <GIC_SPI 64 0>; + ncb = <2>; + mmu-masters = <&mdp 0 2>; + }; + + mdp_port1: qcom,iommu@7600000 { + compatible = "qcom,iommu"; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg-names = "physbase"; + reg = <0x07600000 0x100000>; + interrupt-names = + "secure_irq", + "nonsecure_irq"; + interrupts = + <GIC_SPI 61 0>, + <GIC_SPI 62 0>; + ncb = <2>; + mmu-masters = <&mdp 0 2>; + }; + + gfx3d: qcom,iommu@7c00000 { + compatible = "qcom,iommu-v0"; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg-names = "physbase"; + reg = <0x07c00000 0x100000>; + interrupt-names = + "secure_irq", + "nonsecure_irq"; + interrupts = + <GIC_SPI 69 0>, + <GIC_SPI 70 0>; + ncb = <3>; + ttbr-split = <1>; + mmu-masters = + /* gfx3d_user: */ + <&gpu 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>, + /* gfx3d_priv: */ + <&gpu 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + gfx3d1: qcom,iommu@7d00000 { + compatible = "qcom,iommu-v0"; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg-names = "physbase"; + reg = <0x07d00000 0x100000>; + interrupt-names = + "secure_irq", + "nonsecure_irq"; + interrupts = + <GIC_SPI 210 0>, + <GIC_SPI 211 0>; + ncb = <3>; + ttbr-split = <1>; + mmu-masters = + /* gfx3d_user: */ + <&gpu 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>, + /* gfx3d_priv: */ + <&gpu 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 1f130bc16858..aac43ba96857 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -21,6 +21,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; cpu@1 { @@ -30,6 +32,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; cpu@2 { @@ -39,6 +43,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; cpu@3 { @@ -48,6 +54,8 @@ enable-method = "qcom,kpss-acc-v2"; next-level-cache = <&L2>; qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +63,16 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; }; cpu-pmu { @@ -144,7 +162,27 @@ }; }; - saw_l2: regulator@f9012000 { + saw0: power-controller@f9089000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -183,6 +221,7 @@ compatible = "qcom,gcc-apq8084"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index e1b0d5cd9e3c..ef89daf7a258 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -24,6 +24,10 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; + clocks = <&kraitcc 0>; + clock-names = "cpu"; + clock-latency = <100000>; + }; cpu@1 { @@ -34,6 +38,10 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; + clocks = <&kraitcc 1>; + clock-names = "cpu"; + clock-latency = <100000>; + }; L2: l2-cache { @@ -48,6 +56,39 @@ qcom,no-pc-write; }; + qcom,pvs { + qcom,pvs-format-a; + /* Hz uV */ + qcom,speed0-pvs0-bin-v0 = + < 384000000 950000 >, + < 486000000 975000 >, + < 594000000 1000000 >, + < 702000000 1025000 >, + < 810000000 1075000 >, + < 918000000 1100000 >; + + qcom,speed0-pvs1-bin-v0 = + < 384000000 900000 >, + < 486000000 925000 >, + < 594000000 950000 >, + < 702000000 975000 >, + < 810000000 1025000 >, + < 918000000 1050000 >; + + qcom,speed0-pvs3-bin-v0 = + < 384000000 850000 >, + < 486000000 875000 >, + < 594000000 900000 >, + < 702000000 925000 >, + < 810000000 975000 >, + < 918000000 1000000 >; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -101,11 +142,19 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; }; acc1: clock-controller@2098000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu1_aux"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; }; saw0: regulator@2089000 { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index e265ec16a787..293f2ce59b61 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -14,40 +14,60 @@ #size-cells = <0>; interrupts = <1 9 0xf04>; - cpu@0 { + cpu0: cpu@0 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; qcom,acc = <&acc0>; + clocks = <&kraitcc 0>; + clock-names = "cpu"; + clock-latency = <100000>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SPC>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; qcom,acc = <&acc1>; + clocks = <&kraitcc 1>; + clock-names = "cpu"; + clock-latency = <100000>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SPC>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; qcom,acc = <&acc2>; + clocks = <&kraitcc 2>; + clock-names = "cpu"; + clock-latency = <100000>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SPC>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "qcom,krait"; enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; qcom,acc = <&acc3>; + clocks = <&kraitcc 3>; + clock-names = "cpu"; + clock-latency = <100000>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SPC>; }; L2: l2-cache { @@ -55,6 +75,98 @@ cache-level = <2>; qcom,saw = <&saw_l2>; }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu_alert0: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu_alert1: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert2: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert3: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; cpu-pmu { @@ -71,6 +183,267 @@ clock-frequency = <19200000>; }; + qcom,pvs { + qcom,pvs-format-b; + /* Hz uV ua */ + qcom,speed0-pvs0-bin-v0 = + < 300000000 815000 73 >, + < 345600000 825000 85 >, + < 422400000 835000 104 >, + < 499200000 845000 124 >, + < 576000000 855000 144 >, + < 652800000 865000 165 >, + < 729600000 875000 186 >, + < 806400000 890000 208 >, + < 883200000 900000 229 >, + < 960000000 915000 252 >; + + qcom,speed0-pvs1-bin-v0 = + < 300000000 800000 73 >, + < 345600000 810000 85 >, + < 422400000 820000 104 >, + < 499200000 830000 124 >, + < 576000000 840000 144 >, + < 652800000 850000 165 >, + < 729600000 860000 186 >, + < 806400000 875000 208 >, + < 883200000 885000 229 >, + < 960000000 895000 252 >; + + qcom,speed0-pvs2-bin-v0 = + < 300000000 785000 73 >, + < 345600000 795000 85 >, + < 422400000 805000 104 >, + < 499200000 815000 124 >, + < 576000000 825000 144 >, + < 652800000 835000 165 >, + < 729600000 845000 186 >, + < 806400000 855000 208 >, + < 883200000 865000 229 >, + < 960000000 875000 252 >; + + qcom,speed0-pvs3-bin-v0 = + < 300000000 775000 73 >, + < 345600000 780000 85 >, + < 422400000 790000 104 >, + < 499200000 800000 124 >, + < 576000000 810000 144 >, + < 652800000 820000 165 >, + < 729600000 830000 186 >, + < 806400000 840000 208 >, + < 883200000 850000 229 >, + < 960000000 860000 252 >; + + qcom,speed0-pvs4-bin-v0 = + < 300000000 775000 73 >, + < 345600000 775000 85 >, + < 422400000 780000 104 >, + < 499200000 790000 124 >, + < 576000000 800000 144 >, + < 652800000 810000 165 >, + < 729600000 820000 186 >, + < 806400000 830000 208 >, + < 883200000 840000 229 >, + < 960000000 850000 252 >; + + qcom,speed0-pvs5-bin-v0 = + < 300000000 750000 73 >, + < 345600000 760000 85 >, + < 422400000 770000 104 >, + < 499200000 780000 124 >, + < 576000000 790000 144 >, + < 652800000 800000 165 >, + < 729600000 810000 186 >, + < 806400000 820000 208 >, + < 883200000 830000 229 >, + < 960000000 840000 252 >; + + qcom,speed0-pvs6-bin-v0 = + < 300000000 750000 73 >, + < 345600000 750000 85 >, + < 422400000 760000 104 >, + < 499200000 770000 124 >, + < 576000000 780000 144 >, + < 652800000 790000 165 >, + < 729600000 800000 186 >, + < 806400000 810000 208 >, + < 883200000 820000 229 >, + < 960000000 830000 252 >; + + qcom,speed2-pvs0-bin-v0 = + < 300000000 800000 72 >, + < 345600000 800000 83 >, + < 422400000 805000 102 >, + < 499200000 815000 121 >, + < 576000000 825000 141 >, + < 652800000 835000 161 >, + < 729600000 845000 181 >, + < 806400000 855000 202 >, + < 883200000 865000 223 >, + < 960000000 875000 245 >; + + qcom,speed2-pvs1-bin-v0 = + < 300000000 800000 72 >, + < 345600000 800000 83 >, + < 422400000 800000 102 >, + < 499200000 800000 121 >, + < 576000000 810000 141 >, + < 652800000 820000 161 >, + < 729600000 830000 181 >, + < 806400000 840000 202 >, + < 883200000 850000 223 >, + < 960000000 860000 245 >; + + qcom,speed2-pvs2-bin-v0 = + < 300000000 775000 72 >, + < 345600000 775000 83 >, + < 422400000 775000 102 >, + < 499200000 785000 121 >, + < 576000000 795000 141 >, + < 652800000 805000 161 >, + < 729600000 815000 181 >, + < 806400000 825000 202 >, + < 883200000 835000 223 >, + < 960000000 845000 245 >; + + qcom,speed2-pvs3-bin-v0 = + < 300000000 775000 72 >, + < 345600000 775000 83 >, + < 422400000 775000 102 >, + < 499200000 775000 121 >, + < 576000000 780000 141 >, + < 652800000 790000 161 >, + < 729600000 800000 181 >, + < 806400000 810000 202 >, + < 883200000 820000 223 >, + < 960000000 830000 245 >; + + qcom,speed2-pvs4-bin-v0 = + < 300000000 775000 72 >, + < 345600000 775000 83 >, + < 422400000 775000 102 >, + < 499200000 775000 121 >, + < 576000000 775000 141 >, + < 652800000 780000 161 >, + < 729600000 790000 181 >, + < 806400000 800000 202 >, + < 883200000 810000 223 >, + < 960000000 820000 245 >; + + qcom,speed2-pvs5-bin-v0 = + < 300000000 750000 72 >, + < 345600000 750000 83 >, + < 422400000 750000 102 >, + < 499200000 750000 121 >, + < 576000000 760000 141 >, + < 652800000 770000 161 >, + < 729600000 780000 181 >, + < 806400000 790000 202 >, + < 883200000 800000 223 >, + < 960000000 810000 245 >; + + qcom,speed2-pvs6-bin-v0 = + < 300000000 750000 72 >, + < 345600000 750000 83 >, + < 422400000 750000 102 >, + < 499200000 750000 121 >, + < 576000000 750000 141 >, + < 652800000 760000 161 >, + < 729600000 770000 181 >, + < 806400000 780000 202 >, + < 883200000 790000 223 >, + < 960000000 800000 245 >; + + qcom,speed1-pvs0-bin-v0 = + < 300000000 775000 72 >, + < 345600000 775000 83 >, + < 422400000 775000 101 >, + < 499200000 780000 120 >, + < 576000000 790000 139 >, + < 652800000 800000 159 >, + < 729600000 810000 180 >, + < 806400000 820000 200 >, + < 883200000 830000 221 >, + < 960000000 840000 242 >; + + qcom,speed1-pvs1-bin-v0 = + < 300000000 775000 72 >, + < 345600000 775000 83 >, + < 422400000 775000 101 >, + < 499200000 775000 120 >, + < 576000000 775000 139 >, + < 652800000 785000 159 >, + < 729600000 795000 180 >, + < 806400000 805000 200 >, + < 883200000 815000 221 >, + < 960000000 825000 242 >; + + qcom,speed1-pvs2-bin-v0 = + < 300000000 750000 72 >, + < 345600000 750000 83 >, + < 422400000 750000 101 >, + < 499200000 750000 120 >, + < 576000000 760000 139 >, + < 652800000 770000 159 >, + < 729600000 780000 180 >, + < 806400000 790000 200 >, + < 883200000 800000 221 >, + < 960000000 810000 242 >; + + qcom,speed1-pvs3-bin-v0 = + < 300000000 750000 72 >, + < 345600000 750000 83 >, + < 422400000 750000 101 >, + < 499200000 750000 120 >, + < 576000000 750000 139 >, + < 652800000 755000 159 >, + < 729600000 765000 180 >, + < 806400000 775000 200 >, + < 883200000 785000 221 >, + < 960000000 795000 242 >; + + qcom,speed1-pvs4-bin-v0 = + < 300000000 750000 72 >, + < 345600000 750000 83 >, + < 422400000 750000 101 >, + < 499200000 750000 120 >, + < 576000000 750000 139 >, + < 652800000 750000 159 >, + < 729600000 755000 180 >, + < 806400000 765000 200 >, + < 883200000 775000 221 >, + < 960000000 785000 242 >; + + qcom,speed1-pvs5-bin-v0 = + < 300000000 725000 72 >, + < 345600000 725000 83 >, + < 422400000 725000 101 >, + < 499200000 725000 120 >, + < 576000000 725000 139 >, + < 652800000 735000 159 >, + < 729600000 745000 180 >, + < 806400000 755000 200 >, + < 883200000 765000 221 >, + < 960000000 775000 242 >; + + qcom,speed1-pvs6-bin-v0 = + < 300000000 725000 72 >, + < 345600000 725000 83 >, + < 422400000 725000 101 >, + < 499200000 725000 120 >, + < 576000000 725000 139 >, + < 652800000 725000 159 >, + < 729600000 735000 180 >, + < 806400000 745000 200 >, + < 883200000 755000 221 >, + < 960000000 765000 242 >; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v2"; + #clock-cells = <1>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -85,6 +458,29 @@ <0xf9002000 0x1000>; }; + qfprom: qfprom@fc4bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qfprom"; + reg = <0xfc4bc000 0x1000>; + tsens_calib: calib@d0 { + reg = <0xd0 0x18>; + }; + tsens_backup: backup@440 { + reg = <0x440 0x10>; + }; + }; + + tsens: thermal-sensor@fc4a8000 { + compatible = "qcom,msm8974-tsens"; + reg = <0xfc4a8000 0x2000>; + eeproms = <&tsens_calib>, <&tsens_backup>; + eeprom-names = "calib_data", "calib_backup"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200 3200 + 3200 3200 3200 3200 3200>; + #thermal-sensor-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -144,7 +540,57 @@ }; }; - saw_l2: regulator@f9012000 { + clock-controller@f9016000 { + compatible = "qcom,hfpll"; + reg = <0xf9016000 0x30>; + clock-output-names = "hfpll_l2"; + }; + + clock-controller@f908a000 { + compatible = "qcom,hfpll"; + reg = <0xf908a000 0x30>, <0xf900a000 0x30>; + clock-output-names = "hfpll0"; + }; + + clock-controller@f909a000 { + compatible = "qcom,hfpll"; + reg = <0xf909a000 0x30>, <0xf900a000 0x30>; + clock-output-names = "hfpll1"; + }; + + clock-controller@f90aa000 { + compatible = "qcom,hfpll"; + reg = <0xf90aa000 0x30>, <0xf900a000 0x30>; + clock-output-names = "hfpll2"; + }; + + clock-controller@f90ba000 { + compatible = "qcom,hfpll"; + reg = <0xf90ba000 0x30>, <0xf900a000 0x30>; + clock-output-names = "hfpll3"; + }; + + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + + saw_l2: power-controller@f9012000 { compatible = "qcom,saw2"; reg = <0xf9012000 0x1000>; regulator; @@ -179,6 +625,7 @@ compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; @@ -186,6 +633,7 @@ compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfd8c0000 0x6000>; }; diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index c3a4e9ceba34..9da52dc6260b 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -9,6 +9,9 @@ config DMABOUNCE bool select ZONE_DMA +config KRAIT_L2_ACCESSORS + bool + config SHARP_LOCOMO bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 70b1eff477b3..6b2cddf6e8d0 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -7,6 +7,7 @@ obj-y += firmware.o obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o +obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c new file mode 100644 index 000000000000..5d514bbc88a6 --- /dev/null +++ b/arch/arm/common/krait-l2-accessors.c @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/spinlock.h> +#include <linux/export.h> + +#include <asm/barrier.h> +#include <asm/krait-l2-accessors.h> + +static DEFINE_RAW_SPINLOCK(krait_l2_lock); + +void krait_set_l2_indirect_reg(u32 addr, u32 val) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&krait_l2_lock, flags); + /* + * Select the L2 window by poking l2cpselr, then write to the window + * via l2cpdr. + */ + asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); + isb(); + asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val)); + isb(); + + raw_spin_unlock_irqrestore(&krait_l2_lock, flags); +} +EXPORT_SYMBOL(krait_set_l2_indirect_reg); + +u32 krait_get_l2_indirect_reg(u32 addr) +{ + u32 val; + unsigned long flags; + + raw_spin_lock_irqsave(&krait_l2_lock, flags); + /* + * Select the L2 window by poking l2cpselr, then read from the window + * via l2cpdr. + */ + asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); + isb(); + asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val)); + + raw_spin_unlock_irqrestore(&krait_l2_lock, flags); + + return val; +} +EXPORT_SYMBOL(krait_get_l2_indirect_reg); diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 06075b6d2463..080e9c649f3a 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -108,7 +108,14 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_QCOM_CPUFREQ=y CONFIG_CPU_IDLE=y +CONFIG_ARM_ZYNQ_CPUIDLE=y +CONFIG_ARM_QCOM_CPUIDLE=y CONFIG_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y CONFIG_NET=y @@ -133,7 +140,18 @@ CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_ATH3K=y CONFIG_CFG80211=m +CONFIG_CFG80211_WEXT=y CONFIG_MAC80211=m CONFIG_RFKILL=y CONFIG_RFKILL_INPUT=y @@ -175,6 +193,7 @@ CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y +CONFIG_ATL1C=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_IGB=y @@ -197,6 +216,10 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y +CONFIG_ATH_CARDS=y +CONFIG_ATH_DEBUG=y +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m CONFIG_BRCMFMAC=m CONFIG_RT2X00=m CONFIG_RT2800USB=m @@ -285,9 +308,16 @@ CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y CONFIG_SPI_SPIDEV=y +CONFIG_SPMI=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y +CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8960=y +CONFIG_PINCTRL_MSM8X74=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +CONFIG_PINCTRL_SSBI_PMIC=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DAVINCI=y @@ -318,6 +348,7 @@ CONFIG_CPU_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG +CONFIG_THERMAL_TSENS8960=y CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y @@ -334,6 +365,8 @@ CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_PM8921_CORE=y +CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y @@ -353,6 +386,7 @@ CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_QCOM_RPM=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y @@ -412,6 +446,7 @@ CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_STI=y @@ -433,13 +468,14 @@ CONFIG_SAMSUNG_USB2PHY=y CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y +CONFIG_USB_MSM_OTG=y CONFIG_USB_MXS_PHY=y CONFIG_USB_RCAR_PHY=m CONFIG_USB_RCAR_GEN2_PHY=m CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -455,6 +491,7 @@ CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y @@ -515,6 +552,7 @@ CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y +CONFIG_QCOM_BAM_DMA=y CONFIG_XILINX_VDMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y @@ -525,12 +563,18 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_COMMON_CLK_QCOM=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y +CONFIG_QCOM_RPMCC=y +CONFIG_QCOM_HFPLL=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_QCOM_IOMMU_V0=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y @@ -545,11 +589,14 @@ CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y +CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_MIPHY365X=y CONFIG_PHY_STIH41X_USB=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y +CONFIG_EEPROM=y +CONFIG_QCOM_QFPROM=y CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -573,5 +620,8 @@ CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOCKUP_DETECTOR=y CONFIG_CRYPTO_DEV_TEGRA_AES=y -CONFIG_CPUFREQ_DT=y CONFIG_KEYSTONE_IRQ=y +CONFIG_FUNCTION_TRACER=y +CONFIG_SCHED_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_TRACEPOINT_BENCHMARK=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c7da3319d82..f5693fe04bea 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -1,8 +1,10 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS_ALL=y @@ -21,18 +23,35 @@ CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_STUB=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_CLEANCACHE=y +CONFIG_CMA=y +CONFIG_SECCOMP=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPUFREQ_DT=y +CONFIG_ARM_QCOM_CPUFREQ=y CONFIG_CPU_IDLE=y +CONFIG_ARM_QCOM_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -47,25 +66,43 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_ATH3K=y CONFIG_CFG80211=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y +CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_ATL1C=y +CONFIG_KS8851=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_SLIP=y @@ -74,6 +111,9 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_ATH_CARDS=m +CONFIG_ATH6KL=m +CONFIG_ATH6KL_SDIO=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set @@ -86,7 +126,6 @@ CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_QUP=y CONFIG_SPI=y @@ -97,16 +136,84 @@ CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y CONFIG_PINCTRL_MSM8960=y CONFIG_PINCTRL_MSM8X74=y +CONFIG_PINCTRL_SSBI_PMIC=y +CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y +CONFIG_THERMAL_TSENS8960=y +CONFIG_WATCHDOG=y +CONFIG_QCOM_WDT=y +CONFIG_MFD_PM8921_CORE=y +CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_SYSCON=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_RPM=y CONFIG_MEDIA_SUPPORT=y -CONFIG_FB=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_GSPCA=y +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +CONFIG_USB_GSPCA_DTCS033=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +CONFIG_USB_GSPCA_KINECT=m +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_STK1135=m +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +CONFIG_USB_ZR364XX=m +CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y @@ -115,17 +222,34 @@ CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HID_APPLE=y +CONFIG_HID_LOGITECH=m +CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MICROSOFT=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_OTG_FSM=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_UAS=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_SERIAL=y +CONFIG_USB_MSM_OTG=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FUNCTIONFS=m +CONFIG_USB_FUNCTIONFS_RNDIS=y +CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -135,13 +259,18 @@ CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_COMMON_CLK_QCOM=y CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_GCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_MSM_IOMMU=y +CONFIG_QCOM_HFPLL=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_QCOM_RPMCC=y +CONFIG_QCOM_IOMMU_V0=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y @@ -149,13 +278,19 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT4_FS=y +CONFIG_FANOTIFY=y +CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y CONFIG_VFAT_FS=y -CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_JFFS2_FS=y CONFIG_NFS_FS=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y CONFIG_CIFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y @@ -167,5 +302,5 @@ CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOCKUP_DETECTOR=y # CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h index af319ac4960c..0f8424924902 100644 --- a/arch/arm/include/asm/cpuidle.h +++ b/arch/arm/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARM_CPUIDLE_H #define __ASM_ARM_CPUIDLE_H +#include <asm/proc-fns.h> + #ifdef CONFIG_CPU_IDLE extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); @@ -25,4 +27,25 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev, */ #define ARM_CPUIDLE_WFI_STATE ARM_CPUIDLE_WFI_STATE_PWR(UINT_MAX) +struct device_node; + +struct cpuidle_ops { + int (*suspend)(int cpu, unsigned long arg); + int (*init)(struct device_node *, int cpu); +}; + +struct of_cpuidle_method { + const char *method; + struct cpuidle_ops *ops; +}; + +#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \ + static const struct of_cpuidle_method __cpuidle_method_of_table_##name \ + __used __section(__cpuidle_method_of_table) \ + = { .method = _method, .ops = _ops } + +extern int arm_cpuidle_suspend(int index); + +extern int arm_cpuidle_init(int cpu); + #endif diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/include/asm/krait-l2-accessors.h index 3e210fb818bb..48fe5527bc01 100644 --- a/arch/arm/mach-qcom/scm-boot.h +++ b/arch/arm/include/asm/krait-l2-accessors.h @@ -1,4 +1,5 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +/* + * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -9,18 +10,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#ifndef __MACH_SCM_BOOT_H -#define __MACH_SCM_BOOT_H -#define SCM_BOOT_ADDR 0x1 -#define SCM_FLAG_COLDBOOT_CPU1 0x01 -#define SCM_FLAG_COLDBOOT_CPU2 0x08 -#define SCM_FLAG_COLDBOOT_CPU3 0x20 -#define SCM_FLAG_WARMBOOT_CPU0 0x04 -#define SCM_FLAG_WARMBOOT_CPU1 0x02 -#define SCM_FLAG_WARMBOOT_CPU2 0x10 -#define SCM_FLAG_WARMBOOT_CPU3 0x40 +#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H +#define __ASMARM_KRAIT_L2_ACCESSORS_H -int scm_set_boot_addr(u32 addr, int flags); +extern void krait_set_l2_indirect_reg(u32 addr, u32 val); +extern u32 krait_get_l2_indirect_reg(u32 addr); #endif diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index 89545f6c8403..318da33465f4 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -10,8 +10,28 @@ */ #include <linux/cpuidle.h> -#include <asm/proc-fns.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <asm/cpuidle.h> +extern struct of_cpuidle_method __cpuidle_method_of_table[]; + +static const struct of_cpuidle_method __cpuidle_method_of_table_sentinel + __used __section(__cpuidle_method_of_table_end); + +static struct cpuidle_ops cpuidle_ops[NR_CPUS]; + +/** + * arm_cpuidle_simple_enter() - a wrapper to cpu_do_idle() + * @dev: not used + * @drv: not used + * @index: not used + * + * A trivial wrapper to allow the cpu_do_idle function to be assigned as a + * cpuidle callback by matching the function signature. + * + * Returns the index passed as parameter + */ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { @@ -19,3 +39,114 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, return index; } + +/** + * arm_cpuidle_suspend() - function to enter low power idle states + * @index: an integer used as an identifier for the low level PM callbacks + * + * This function calls the underlying arch specific low level PM code as + * registered at the init time. + * + * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the + * callback otherwise. + */ +int arm_cpuidle_suspend(int index) +{ + int ret = -EOPNOTSUPP; + int cpu = smp_processor_id(); + + if (cpuidle_ops[cpu].suspend) + ret = cpuidle_ops[cpu].suspend(cpu, index); + + return ret; +} + +/** + * arm_cpuidle_get_ops() - find a registered cpuidle_ops by name + * @method: the method name + * + * Search in the __cpuidle_method_of_table array the cpuidle ops matching the + * method name. + * + * Returns a struct cpuidle_ops pointer, NULL if not found. + */ +static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) +{ + struct of_cpuidle_method *m = __cpuidle_method_of_table; + + for (; m->method; m++) + if (!strcmp(m->method, method)) + return m->ops; + + return NULL; +} + +/** + * arm_cpuidle_read_ops() - Initialize the cpuidle ops with the device tree + * @dn: a pointer to a struct device node corresponding to a cpu node + * @cpu: the cpu identifier + * + * Get the method name defined in the 'enable-method' property, retrieve the + * associated cpuidle_ops and do a struct copy. This copy is needed because all + * cpuidle_ops are tagged __initdata and will be unloaded after the init + * process. + * + * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if + * no cpuidle_ops is registered for the 'enable-method'. + */ +static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) +{ + const char *enable_method; + struct cpuidle_ops *ops; + + enable_method = of_get_property(dn, "enable-method", NULL); + if (!enable_method) + return -ENOENT; + + ops = arm_cpuidle_get_ops(enable_method); + if (!ops) { + pr_warn("%s: unsupported enable-method property: %s\n", + dn->full_name, enable_method); + return -EOPNOTSUPP; + } + + cpuidle_ops[cpu] = *ops; /* structure copy */ + + pr_notice("cpuidle: enable-method property '%s'" + " found operations\n", enable_method); + + return 0; +} + +/** + * arm_cpuidle_init() - Initialize cpuidle_ops for a specific cpu + * @cpu: the cpu to be initialized + * + * Initialize the cpuidle ops with the device for the cpu and then call + * the cpu's idle initialization callback. This may fail if the underlying HW + * is not operational. + * + * Returns: + * 0 on success, + * -ENODEV if it fails to find the cpu node in the device tree, + * -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu, + * -ENOENT if it fails to find an 'enable-method' property, + * -ENXIO if the HW reports a failure or a misconfiguration, + * -ENOMEM if the HW report an memory allocation failure + */ +int __init arm_cpuidle_init(int cpu) +{ + struct device_node *cpu_node = of_cpu_device_node_get(cpu); + int ret; + + if (!cpu_node) + return -ENODEV; + + ret = arm_cpuidle_read_ops(cpu_node, cpu); + if (!ret && cpuidle_ops[cpu].init) + ret = cpuidle_ops[cpu].init(cpu_node, cpu); + + of_node_put(cpu_node); + + return ret; +} diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index e365c1bb1265..306ebc51599a 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -17,7 +17,6 @@ #include <linux/cpuidle.h> #include <linux/io.h> #include <linux/export.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #include <mach/cpuidle.h> diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index d76d08623f9f..8e21ccc1eda2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -9,7 +9,6 @@ #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 7d92e6584551..5742a9fd1ef2 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -9,7 +9,6 @@ #include <linux/cpuidle.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "cpuidle.h" diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 5a36722b089d..2c9f1a8bf245 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -10,7 +10,6 @@ #include <linux/cpu_pm.h> #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/suspend.h> #include "common.h" diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 01e398a868bc..7622dbb05083 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -17,7 +17,6 @@ #include <linux/clockchips.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include "common.h" #include "pm.h" diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 48003ea652b9..afa30dd9521d 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -4,6 +4,8 @@ menuconfig ARCH_QCOM select ARM_GIC select ARM_AMBA select PINCTRL + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. @@ -22,7 +24,4 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER -config QCOM_SCM - bool - endif diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile index 8f756ae1ae31..e324375fa919 100644 --- a/arch/arm/mach-qcom/Makefile +++ b/arch/arm/mach-qcom/Makefile @@ -1,5 +1,2 @@ obj-y := board.o obj-$(CONFIG_SMP) += platsmp.o -obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o - -CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c index 09cffed4c0a4..5cde63a64b34 100644 --- a/arch/arm/mach-qcom/platsmp.c +++ b/arch/arm/mach-qcom/platsmp.c @@ -17,10 +17,10 @@ #include <linux/of_address.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/qcom_scm.h> #include <asm/smp_plat.h> -#include "scm-boot.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0 #define SCSS_CPU1CORE_RESET 0x2d80 @@ -319,25 +319,10 @@ static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) { - int cpu, map; - unsigned int flags = 0; - static const int cold_boot_flags[] = { - 0, - SCM_FLAG_COLDBOOT_CPU1, - SCM_FLAG_COLDBOOT_CPU2, - SCM_FLAG_COLDBOOT_CPU3, - }; - - for_each_present_cpu(cpu) { - map = cpu_logical_map(cpu); - if (WARN_ON(map >= ARRAY_SIZE(cold_boot_flags))) { - set_cpu_present(cpu, false); - continue; - } - flags |= cold_boot_flags[map]; - } + int cpu; - if (scm_set_boot_addr(virt_to_phys(secondary_startup_arm), flags)) { + if (qcom_scm_set_cold_boot_addr(secondary_startup_arm, + cpu_present_mask)) { for_each_present_cpu(cpu) { if (cpu == smp_processor_id()) continue; diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c deleted file mode 100644 index e8ff7beb6218..000000000000 --- a/arch/arm/mach-qcom/scm-boot.c +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/module.h> -#include <linux/slab.h> - -#include "scm.h" -#include "scm-boot.h" - -/* - * Set the cold/warm boot address for one of the CPU cores. - */ -int scm_set_boot_addr(u32 addr, int flags) -{ - struct { - __le32 flags; - __le32 addr; - } cmd; - - cmd.addr = cpu_to_le32(addr); - cmd.flags = cpu_to_le32(flags); - return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR, - &cmd, sizeof(cmd), NULL, 0); -} -EXPORT_SYMBOL(scm_set_boot_addr); diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c deleted file mode 100644 index 1d9cf18c7091..000000000000 --- a/arch/arm/mach-qcom/scm.c +++ /dev/null @@ -1,326 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/errno.h> -#include <linux/err.h> - -#include <asm/outercache.h> -#include <asm/cacheflush.h> - -#include "scm.h" - -#define SCM_ENOMEM -5 -#define SCM_EOPNOTSUPP -4 -#define SCM_EINVAL_ADDR -3 -#define SCM_EINVAL_ARG -2 -#define SCM_ERROR -1 -#define SCM_INTERRUPTED 1 - -static DEFINE_MUTEX(scm_lock); - -/** - * struct scm_command - one SCM command buffer - * @len: total available memory for command and response - * @buf_offset: start of command buffer - * @resp_hdr_offset: start of response buffer - * @id: command to be executed - * @buf: buffer returned from scm_get_command_buffer() - * - * An SCM command is laid out in memory as follows: - * - * ------------------- <--- struct scm_command - * | command header | - * ------------------- <--- scm_get_command_buffer() - * | command buffer | - * ------------------- <--- struct scm_response and - * | response header | scm_command_to_response() - * ------------------- <--- scm_get_response_buffer() - * | response buffer | - * ------------------- - * - * There can be arbitrary padding between the headers and buffers so - * you should always use the appropriate scm_get_*_buffer() routines - * to access the buffers in a safe manner. - */ -struct scm_command { - __le32 len; - __le32 buf_offset; - __le32 resp_hdr_offset; - __le32 id; - __le32 buf[0]; -}; - -/** - * struct scm_response - one SCM response buffer - * @len: total available memory for response - * @buf_offset: start of response data relative to start of scm_response - * @is_complete: indicates if the command has finished processing - */ -struct scm_response { - __le32 len; - __le32 buf_offset; - __le32 is_complete; -}; - -/** - * alloc_scm_command() - Allocate an SCM command - * @cmd_size: size of the command buffer - * @resp_size: size of the response buffer - * - * Allocate an SCM command, including enough room for the command - * and response headers as well as the command and response buffers. - * - * Returns a valid &scm_command on success or %NULL if the allocation fails. - */ -static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size) -{ - struct scm_command *cmd; - size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size + - resp_size; - u32 offset; - - cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); - if (cmd) { - cmd->len = cpu_to_le32(len); - offset = offsetof(struct scm_command, buf); - cmd->buf_offset = cpu_to_le32(offset); - cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); - } - return cmd; -} - -/** - * free_scm_command() - Free an SCM command - * @cmd: command to free - * - * Free an SCM command. - */ -static inline void free_scm_command(struct scm_command *cmd) -{ - kfree(cmd); -} - -/** - * scm_command_to_response() - Get a pointer to a scm_response - * @cmd: command - * - * Returns a pointer to a response for a command. - */ -static inline struct scm_response *scm_command_to_response( - const struct scm_command *cmd) -{ - return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); -} - -/** - * scm_get_command_buffer() - Get a pointer to a command buffer - * @cmd: command - * - * Returns a pointer to the command buffer of a command. - */ -static inline void *scm_get_command_buffer(const struct scm_command *cmd) -{ - return (void *)cmd->buf; -} - -/** - * scm_get_response_buffer() - Get a pointer to a response buffer - * @rsp: response - * - * Returns a pointer to a response buffer of a response. - */ -static inline void *scm_get_response_buffer(const struct scm_response *rsp) -{ - return (void *)rsp + le32_to_cpu(rsp->buf_offset); -} - -static int scm_remap_error(int err) -{ - pr_err("scm_call failed with error code %d\n", err); - switch (err) { - case SCM_ERROR: - return -EIO; - case SCM_EINVAL_ADDR: - case SCM_EINVAL_ARG: - return -EINVAL; - case SCM_EOPNOTSUPP: - return -EOPNOTSUPP; - case SCM_ENOMEM: - return -ENOMEM; - } - return -EINVAL; -} - -static u32 smc(u32 cmd_addr) -{ - int context_id; - register u32 r0 asm("r0") = 1; - register u32 r1 asm("r1") = (u32)&context_id; - register u32 r2 asm("r2") = cmd_addr; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r0") - __asmeq("%2", "r1") - __asmeq("%3", "r2") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0) - : "r" (r0), "r" (r1), "r" (r2) - : "r3"); - } while (r0 == SCM_INTERRUPTED); - - return r0; -} - -static int __scm_call(const struct scm_command *cmd) -{ - int ret; - u32 cmd_addr = virt_to_phys(cmd); - - /* - * Flush the command buffer so that the secure world sees - * the correct data. - */ - __cpuc_flush_dcache_area((void *)cmd, cmd->len); - outer_flush_range(cmd_addr, cmd_addr + cmd->len); - - ret = smc(cmd_addr); - if (ret < 0) - ret = scm_remap_error(ret); - - return ret; -} - -static void scm_inv_range(unsigned long start, unsigned long end) -{ - u32 cacheline_size, ctr; - - asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); - cacheline_size = 4 << ((ctr >> 16) & 0xf); - - start = round_down(start, cacheline_size); - end = round_up(end, cacheline_size); - outer_inv_range(start, end); - while (start < end) { - asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) - : "memory"); - start += cacheline_size; - } - dsb(); - isb(); -} - -/** - * scm_call() - Send an SCM command - * @svc_id: service identifier - * @cmd_id: command identifier - * @cmd_buf: command buffer - * @cmd_len: length of the command buffer - * @resp_buf: response buffer - * @resp_len: length of the response buffer - * - * Sends a command to the SCM and waits for the command to finish processing. - * - * A note on cache maintenance: - * Note that any buffers that are expected to be accessed by the secure world - * must be flushed before invoking scm_call and invalidated in the cache - * immediately after scm_call returns. Cache maintenance on the command and - * response buffers is taken care of by scm_call; however, callers are - * responsible for any other cached buffers passed over to the secure world. - */ -int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len) -{ - int ret; - struct scm_command *cmd; - struct scm_response *rsp; - unsigned long start, end; - - cmd = alloc_scm_command(cmd_len, resp_len); - if (!cmd) - return -ENOMEM; - - cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); - if (cmd_buf) - memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len); - - mutex_lock(&scm_lock); - ret = __scm_call(cmd); - mutex_unlock(&scm_lock); - if (ret) - goto out; - - rsp = scm_command_to_response(cmd); - start = (unsigned long)rsp; - - do { - scm_inv_range(start, start + sizeof(*rsp)); - } while (!rsp->is_complete); - - end = (unsigned long)scm_get_response_buffer(rsp) + resp_len; - scm_inv_range(start, end); - - if (resp_buf) - memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len); -out: - free_scm_command(cmd); - return ret; -} -EXPORT_SYMBOL(scm_call); - -u32 scm_get_version(void) -{ - int context_id; - static u32 version = -1; - register u32 r0 asm("r0"); - register u32 r1 asm("r1"); - - if (version != -1) - return version; - - mutex_lock(&scm_lock); - - r0 = 0x1 << 8; - r1 = (u32)&context_id; - do { - asm volatile( - __asmeq("%0", "r0") - __asmeq("%1", "r1") - __asmeq("%2", "r0") - __asmeq("%3", "r1") -#ifdef REQUIRES_SEC - ".arch_extension sec\n" -#endif - "smc #0 @ switch to secure world\n" - : "=r" (r0), "=r" (r1) - : "r" (r0), "r" (r1) - : "r2", "r3"); - } while (r0 == SCM_INTERRUPTED); - - version = r1; - mutex_unlock(&scm_lock); - - return version; -} -EXPORT_SYMBOL(scm_get_version); diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c index 2eb072440dfa..93aa8cb70195 100644 --- a/arch/arm/mach-s3c64xx/cpuidle.c +++ b/arch/arm/mach-s3c64xx/cpuidle.c @@ -16,7 +16,7 @@ #include <linux/export.h> #include <linux/time.h> -#include <asm/proc-fns.h> +#include <asm/cpuidle.h> #include <mach/map.h> diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 4f25a7c7ca0f..e22b0d9fdc88 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index f8815ed65d9d..a2400ab44daa 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> #include <asm/smp_plat.h> #include <asm/suspend.h> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1b8e97331ffb..610965dd87ce 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -177,6 +177,12 @@ config ARCH_MEDIATEK help Support for Mediatek MT65xx & MT81xx ARMv8 SoCs +config ARCH_QCOM + bool "Qualcomm Platforms" + select PINCTRL + help + This enables support for the ARMv8 based Qualcomm chipsets. + config ARCH_SEATTLE bool "AMD Seattle SoC Family" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index e0350caf049e..8517f15870be 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -5,5 +5,6 @@ dts-dirs += cavium dts-dirs += exynos dts-dirs += freescale dts-dirs += mediatek +dts-dirs += qcom subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile new file mode 100644 index 000000000000..8e94af64ee94 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi new file mode 100644 index 000000000000..37876699df7c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -0,0 +1,11 @@ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +&pm8916_gpios { + usb_hub_reset_pm_default: usb_hub_reset_pm_default { + pinconf { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi new file mode 100644 index 000000000000..d9f05a5d3553 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -0,0 +1,14 @@ + +#include <dt-bindings/gpio/gpio.h> + +&msm_gpio { + usb_id_default: usb_id_default { + pinconf { + pins = "gpio121"; + function = "gpio"; + drive-strength = <8>; + input-enable; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts new file mode 100644 index 000000000000..6fea25d21a48 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom-ids.h> +#include "apq8016-sbc.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; + compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc"; + qcom,board-id = <QCOM_BRD_ID(SBC, 1, 0) QCOM_BRD_SUBTYPE_DEFAULT>; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi new file mode 100644 index 000000000000..fda3c7c00ded --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include "apq8016-sbc-soc-pins.dtsi" +#include "apq8016-sbc-pmic-pins.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; + + usb2513 { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_hub_reset_pm_default>; + }; + + usb_id: usb-id { + interrupt-parent = <&msm_gpio>; + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&msm_gpio 121 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_id_default>; + }; +}; +&blsp_dma { + status = "okay"; +}; + +&blsp_spi3 { + status = "okay"; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + #address-cells = <0>; + interrupt-parent = <&sdhc_2>; + interrupts = <0 1 2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xffffffff>; + interrupt-map = <0 &intc 0 125 0 + 1 &intc 0 221 0 + 2 &msm_gpio 38 0>; + interrupt-names = "hc_irq", "pwr_irq", "status_irq"; + cd-gpios = <&msm_gpio 38 0x1>; + + //status = "okay"; +}; + +&usb_dev { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + extcon = <&usb_id>, <&usb_id>; + dr_mode = "otg"; + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm-pm8916-rpm-regulator.dtsi b/arch/arm64/boot/dts/qcom/msm-pm8916-rpm-regulator.dtsi new file mode 100644 index 000000000000..d5b7ea55c72b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm-pm8916-rpm-regulator.dtsi @@ -0,0 +1,365 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&rpm_bus { + rpm-regulator-smpa1 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <1>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s1 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s1"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa2 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <2>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s2 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s2"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa3 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <3>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s3 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s3"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-smpa4 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "smpa"; + qcom,resource-id = <4>; + qcom,regulator-type = <1>; + qcom,hpm-min-load = <100000>; + status = "disabled"; + + regulator-s4 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s4"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa1 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <1>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l1 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l1"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa2 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <2>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l2 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l2"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa3 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <3>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l3 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l3"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa4 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <4>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l4 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l4"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa5 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <5>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l5 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l5"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa6 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <6>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l6 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l6"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa7 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <7>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l7 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l7"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa8 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <8>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l8 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l8"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa9 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <9>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l9 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l9"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa10 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <10>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l10 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l10"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa11 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <11>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l11 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l11"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa12 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <12>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l12 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l12"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa13 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <13>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <5000>; + status = "disabled"; + + regulator-l13 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l13"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa14 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <14>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <5000>; + status = "disabled"; + + regulator-l14 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l14"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa15 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <15>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <5000>; + status = "disabled"; + + regulator-l15 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l15"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa16 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <16>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <5000>; + status = "disabled"; + + regulator-l16 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l16"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa17 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <17>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l17 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l17"; + qcom,set = <3>; + status = "disabled"; + }; + }; + + rpm-regulator-ldoa18 { + compatible = "qcom,rpm-smd-regulator-resource"; + qcom,resource-name = "ldoa"; + qcom,resource-id = <18>; + qcom,regulator-type = <0>; + qcom,hpm-min-load = <10000>; + status = "disabled"; + + regulator-l18 { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l18"; + qcom,set = <3>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts new file mode 100644 index 000000000000..8be101c0e903 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -0,0 +1,24 @@ +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 and +* only version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +/dts-v1/; + +#include <dt-bindings/arm/qcom-ids.h> +#include "msm8916-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", + "qcom,msm8916", "qcom,mtp"; + qcom,board-id = <QCOM_BRD_ID(MTP, 1, 0) QCOM_BRD_SUBTYPE_DEFAULT>, + <QCOM_BRD_ID(MTP, 1, 0) QCOM_BRD_SUBTYPE_MTP8916_SMB1360>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi new file mode 100644 index 000000000000..3092cbb3d430 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -0,0 +1,72 @@ +/* Copyright (c) 2014-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8916.dtsi" + +/ { + chosen { + stdout-path = &blsp1_uart2; + }; + + aliases { + sdhc1 = &sdhc_1; /* SDC1 eMMC slot */ + sdhc2 = &sdhc_2; /* SDC2 SD card slot */ + }; + + soc { + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp_spi3 { + status = "okay"; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "active", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + #address-cells = <0>; + interrupt-parent = <&sdhc_2>; + interrupts = <0 1 2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xffffffff>; + interrupt-map = <0 &intc 0 125 0 + 1 &intc 0 221 0 + 2 &msm_gpio 38 0>; + interrupt-names = "hc_irq", "pwr_irq", "status_irq"; + cd-gpios = <&msm_gpio 38 0x1>; + + //status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi b/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi new file mode 100644 index 000000000000..aaa3e3ac69b5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-regulator.dtsi @@ -0,0 +1,375 @@ +/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* SPM controlled regulators */ +&usid1 { + pm8916_s2: spm-regulator@1700 { + compatible = "qcom,spm-regulator"; + regulator-name = "8916_s2"; + reg = <0x1700 0x100>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + }; +}; + +/* CPR controlled regulator */ + +&soc { + mem_acc_vreg_corner: regulator@1946000 { + compatible = "qcom,mem-acc-regulator"; + reg = <0x1946000 0x4>, <0x1946000 0x4>, <0x58000 0x1000>; + reg-names = "acc-sel-l1", "acc-sel-l2", "efuse_addr"; + regulator-name = "mem_acc_corner"; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <3>; + + qcom,acc-sel-l1-bit-pos = <0>; + qcom,acc-sel-l2-bit-pos = <8>; + qcom,corner-acc-map = <0 1 1>; + qcom,l1-config-skip-fuse-sel = <0 52 1 1 0>; + }; + + apc_vreg_corner: regulator@b018000 { + compatible = "qcom,cpr-regulator"; + reg = <0xb018000 0x1000>, <0xb011064 4>, <0x58000 0x1000>; + reg-names = "rbcpr", "rbcpr_clk", "efuse_addr"; + interrupts = <0 15 0>; + regulator-name = "apc_corner"; + qcom,cpr-fuse-corners = <3>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <8>; + + qcom,cpr-voltage-ceiling = <1050000 1150000 1350000>; + qcom,cpr-voltage-floor = <1050000 1050000 1162500>; + vdd-apc-supply = <&pm8916_s2>; + + qcom,vdd-mx-corner-map = <4 5 7>; + qcom,vdd-mx-vmin-method = <4>; + vdd-mx-supply = <&pm8916_l3_corner_ao>; + qcom,vdd-mx-vmax = <7>; + + mem-acc-supply = <&mem_acc_vreg_corner>; + + qcom,cpr-ref-clk = <19200>; + qcom,cpr-timer-delay = <5000>; + qcom,cpr-timer-cons-up = <0>; + qcom,cpr-timer-cons-down = <2>; + qcom,cpr-irq-line = <0>; + qcom,cpr-step-quotient = <26>; + qcom,cpr-up-threshold = <0>; + qcom,cpr-down-threshold = <2>; + qcom,cpr-idle-clocks = <15>; + qcom,cpr-gcnt-time = <1>; + qcom,vdd-apc-step-up-limit = <1>; + qcom,vdd-apc-step-down-limit = <1>; + qcom,cpr-apc-volt-step = <12500>; + + qcom,cpr-fuse-row = <27 0>; + qcom,cpr-fuse-target-quot = <42 24 6>; + qcom,cpr-fuse-ro-sel = <54 54 54>; + qcom,cpr-fuse-bp-cpr-disable = <57>; + qcom,cpr-fuse-init-voltage = + <27 36 6 0>, + <27 18 6 0>, + <27 0 6 0>; + qcom,cpr-init-voltage-ref = <1050000 1150000 1350000>; + qcom,cpr-init-voltage-step = <10000>; + qcom,cpr-corner-map = <1 1 2 2 3 3 3 3>; + qcom,cpr-corner-frequency-map = + <1 200000000>, + <2 400000000>, + <3 533330000>, + <4 800000000>, + <5 998400000>, + <6 1094400000>, + <7 1152000000>, + <8 1209600000>; + qcom,speed-bin-fuse-sel = <0 55 2 0>; + qcom,cpr-speed-bin-max-corners = + <0 0 2 4 8>, + <1 0 2 4 7>; + qcom,cpr-quot-adjust-scaling-factor-max = <650>; + qcom,cpr-enable; + }; +}; + + +/* RPM controlled regulators */ +&rpm_bus { + + /* PM8916 S1 VDD_CX supply */ + rpm-regulator-smpa1 { + status = "okay"; + pm8916_s1_corner: regulator-s1-corner { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s1_corner"; + qcom,set = <3>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <7>; + qcom,use-voltage-corner; + }; + pm8916_s1_corner_ao: regulator-s1-corner-ao { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s1_corner_ao"; + qcom,set = <1>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <7>; + qcom,use-voltage-corner; + }; + pm8916_s1_floor_corner: regulator-s1-floor-corner { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_s1_floor_corner"; + qcom,set = <3>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <7>; + qcom,use-voltage-floor-corner; + qcom,always-send-voltage; + }; + }; + + rpm-regulator-smpa3 { + status = "okay"; + pm8916_s3: regulator-s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + qcom,init-voltage = <1200000>; + status = "okay"; + }; + }; + + rpm-regulator-smpa4 { + status = "okay"; + pm8916_s4: regulator-s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa1 { + status = "okay"; + pm8916_l1: regulator-l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,init-voltage = <1225000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa2 { + status = "okay"; + pm8916_l2: regulator-l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + status = "okay"; + }; + }; + + /* PM8916 L3 VDD_MX supply */ + rpm-regulator-ldoa3 { + status = "okay"; + pm8916_l3: regulator-l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + status = "okay"; + }; + + pm8916_l3_corner_ao: regulator-l3-corner-ao { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l3_corner_ao"; + qcom,set = <1>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <7>; + qcom,use-voltage-corner; + }; + + pm8916_l3_corner_so: regulator-l3-corner-so { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l3_corner_so"; + qcom,set = <2>; + regulator-min-microvolt = <1>; + regulator-max-microvolt = <7>; + qcom,use-voltage-corner; + qcom,init-voltage = <1>; + }; + }; + + rpm-regulator-ldoa4 { + status = "okay"; + pm8916_l4: regulator-l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,init-voltage = <2050000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa5 { + status = "okay"; + pm8916_l5: regulator-l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa6 { + status = "okay"; + pm8916_l6: regulator-l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa7 { + status = "okay"; + pm8916_l7: regulator-l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + pm8916_l7_ao: regulator-l7-ao { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l7_ao"; + qcom,set = <1>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + pm8916_l7_so: regulator-l7-so { + compatible = "qcom,rpm-smd-regulator"; + regulator-name = "8916_l7_so"; + qcom,set = <2>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-enable = <0>; + }; + }; + + rpm-regulator-ldoa8 { + status = "okay"; + pm8916_l8: regulator-l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + qcom,init-voltage = <2850000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa9 { + status = "okay"; + pm8916_l9: regulator-l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <3300000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa10 { + status = "okay"; + pm8916_l10: regulator-l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa11 { + status = "okay"; + pm8916_l11: regulator-l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa12 { + status = "okay"; + pm8916_l12: regulator-l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa13 { + status = "okay"; + pm8916_l13: regulator-l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + qcom,init-voltage = <3075000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa14 { + status = "okay"; + pm8916_l14: regulator-l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa15 { + status = "okay"; + pm8916_l15: regulator-l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa16 { + status = "okay"; + pm8916_l16: regulator-l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa17 { + status = "okay"; + pm8916_l17: regulator-l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + qcom,init-voltage = <2850000>; + status = "okay"; + }; + }; + + rpm-regulator-ldoa18 { + status = "okay"; + pm8916_l18: regulator-l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi new file mode 100644 index 000000000000..6cab773284c2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -0,0 +1,957 @@ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/reset/qcom,gcc-msm8916.h> +#include <dt-bindings/arm/qcom-ids.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Qualcomm Technologies, Inc. MSM8916"; + compatible = "qcom,msm8916"; + qcom,msm-id = <QCOM_ID_MSM8916 0>, + <QCOM_ID_MSM8216 0>, + <QCOM_ID_MSM8116 0>, + <QCOM_ID_MSM8616 0>, + <QCOM_ID_APQ8016 0>; + + + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + external_image_mem: external_image_region@86000000 { + compatible = "removed-dma-pool"; + no-map; + reg = <0x0 0x86000000 0x0 0x0800000>; + }; + + modem_adsp_mem: modem_adsp_region@86800000 { + compatible = "removed-dma-pool"; + no-map; + reg = <0x0 0x86800000 0x0 0x04e00000>; + }; + + peripheral_mem: peripheral_region@8b600000 { + compatible = "removed-dma-pool"; + no-map; + reg = <0x0 0x8b600000 0x0 0x0600000>; + }; + + secure_mem: secure_region { + compatible = "shared-dma-pool"; + reusable; + alignment = <0 0x400000>; + size = <0 0x7000000>; + }; + + venus_qseecom_mem: venus_qseecom_region { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x10000000>; + reusable; + alignment = <0 0x400000>; + size = <0 0x1400000>; + }; + + audio_mem: audio_region { + compatible = "shared-dma-pool"; + reusable; + alignment = <0 0x400000>; + size = <0 0x400000>; + }; + + cont_splash_mem: splash_region@83000000 { + reg = <0x0 0x83000000 0x0 0x1200000>; + }; + }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + msm_gpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi1_default: spi1_default { + pinmux { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio2"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio2"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + }; + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi2_default: spi2_default { + pinmux { + function = "blsp_spi2"; + pins = "gpio4", "gpio5", "gpio7"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio6"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio6"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi3_default: spi3_default { + pinmux { + function = "blsp_spi3"; + pins = "gpio8", "gpio9", "gpio11"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio10"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio10"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3_sleep { + pinmux { + function = "gpio"; + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + }; + pinconf { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi4_default: spi4_default { + pinmux { + function = "blsp_spi4"; + pins = "gpio12", "gpio13", "gpio15"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio14"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio14"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4_sleep { + pinmux { + function = "gpio"; + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + }; + pinconf { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi5_default: spi5_default { + pinmux { + function = "blsp_spi5"; + pins = "gpio16", "gpio17", "gpio19"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio18"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio18"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5_sleep { + pinmux { + function = "gpio"; + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + }; + pinconf { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + spi6_default: spi6_default { + pinmux { + function = "blsp_spi6"; + pins = "gpio20", "gpio21", "gpio23"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio22"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio22"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6_sleep { + pinmux { + function = "gpio"; + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + + + sdhc2_cd_pin { + sdc2_cd_on: cd_on { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-pull-up; + }; + }; + sdc2_cd_off: cd_off { + pinmux { + function = "gpio"; + pins = "gpio38"; + }; + pinconf { + pins = "gpio38"; + drive-strength = <2>; + bias-disable; + }; + }; + }; + + pmx_sdc1_clk { + sdc1_clk_on: clk_on { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc1_clk_off: clk_off { + pinmux { + pins = "sdc1_clk"; + }; + pinconf { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_cmd { + sdc1_cmd_on: cmd_on { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_cmd_off: cmd_off { + pinmux { + pins = "sdc1_cmd"; + }; + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc1_data { + sdc1_data_on: data_on { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc1_data_off: data_off { + pinmux { + pins = "sdc1_data"; + }; + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_clk { + sdc2_clk_on: clk_on { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + }; + sdc2_clk_off: clk_off { + pinmux { + pins = "sdc2_clk"; + }; + pinconf { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_cmd { + sdc2_cmd_on: cmd_on { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_cmd_off: cmd_off { + pinmux { + pins = "sdc2_cmd"; + }; + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + pmx_sdc2_data { + sdc2_data_on: data_on { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + sdc2_data_off: data_off { + pinmux { + pins = "sdc2_data"; + }; + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + }; + + qcom,ipc-spinlock@1905000 { + compatible = "qcom,ipc-spinlock-sfpb"; + reg = <0x1905000 0x8000>; + qcom,num-locks = <8>; + }; + + qcom,smem@86300000 { + compatible = "qcom,smem"; + reg = <0x86300000 0x100000>, + <0x0b011008 0x4>, + <0x60000 0x8000>, + <0x193D000 0x8>; + reg-names = "smem", "irq-reg-base", "aux-mem1", "smem_targ_info_reg"; + qcom,mpu-enabled; + + qcom,smd-modem { + compatible = "qcom,smd"; + qcom,smd-edge = <0>; + qcom,smd-irq-offset = <0x0>; + qcom,smd-irq-bitmask = <0x1000>; + interrupts = <0 25 1>; + label = "modem"; + }; + + qcom,smsm-modem { + compatible = "qcom,smsm"; + qcom,smsm-edge = <0>; + qcom,smsm-irq-offset = <0x0>; + qcom,smsm-irq-bitmask = <0x2000>; + interrupts = <0 26 1>; + }; + + qcom,smd-wcnss { + compatible = "qcom,smd"; + qcom,smd-edge = <6>; + qcom,smd-irq-offset = <0x0>; + qcom,smd-irq-bitmask = <0x20000>; + interrupts = <0 142 1>; + label = "wcnss"; + }; + + qcom,smsm-wcnss { + compatible = "qcom,smsm"; + qcom,smsm-edge = <6>; + qcom,smsm-irq-offset = <0x0>; + qcom,smsm-irq-bitmask = <0x80000>; + interrupts = <0 144 1>; + }; + + qcom,smd-rpm { + compatible = "qcom,smd"; + qcom,smd-edge = <15>; + qcom,smd-irq-offset = <0x0>; + qcom,smd-irq-bitmask = <0x1>; + interrupts = <0 168 1>; + label = "rpm"; + qcom,irq-no-suspend; + qcom,not-loadable; + }; + }; + + rpm_bus: qcom,rpm-smd { + compatible = "qcom,rpm-smd"; + rpm-channel-name = "rpm_requests"; + rpm-channel-type = <15>; /* SMD_APPS_RPM */ + }; + + gcc: qcom,gcc@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x80000>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 5>, <&blsp_dma 4>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 7>, <&blsp_dma 6>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 9>, <&blsp_dma 8>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 11>, <&blsp_dma 10>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x600>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 13>, <&blsp_dma 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x600>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xb020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb021000 0x1000>, + <0xb022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb028000 0x1000>; + status = "disabled"; + }; + }; + + + sdhc_1: sdhci@07824000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: sdhci@07864000 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + bus-width = <4>; + status = "disabled"; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x001000>, + <0x2400000 0x400000>, + <0x2c00000 0x400000>, + <0x3800000 0x200000>, + <0x200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,qfprom"; + reg = <0x5c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0xd0 0x8>; + }; + tsens_calsel: calsel@ec { + reg = <0xec 0x4>; + }; + }; + + tsens: thermal-sensor@4a8000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + eeproms = <&tsens_caldata>, <&tsens_calsel>; + eeprom-names = "calib_data", "calib_sel"; + qcom,tsens-slopes = <3200 3200 3200 3200 3200>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu_alert0: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu_alert2: trip@0 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip@1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + }; + + usb_dev: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x78d9000 0x400>; + dr_mode = "peripheral"; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_host: ehci@78d9000 { + compatible = "qcom,ehci-host"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + usb-phy = <&usb_otg>; + status = "disabled"; + }; + + usb_otg: phy@78d9000 { + compatible = "qcom,usb-otg-snps"; + reg = <0x78d9000 0x400>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, + <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + + vddcx-supply = <&pm8916_s1_corner>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + qcom,vdd-levels = <1 5 7>; + + qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; + dr_mode = "peripheral"; + qcom,otg-control = <2>; // PMIC + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "iface", "core", "sleep"; + + resets = <&gcc GCC_USB2A_PHY_BCR>, <&gcc GCC_USB_HS_BCR>; + reset-names = "phy", "link"; + status = "disabled"; + }; + }; +}; + +#include "msm-pm8916-rpm-regulator.dtsi" +#include "pm8916.dtsi" +#include "msm8916-regulator.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi new file mode 100644 index 000000000000..9aa210f2ecdf --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -0,0 +1,30 @@ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid0: pm8916@0 { + compatible ="qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + }; + + usid1: pm8916@1 { + compatible ="qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index be1f12a5a5f0..8cce580084e7 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -33,6 +33,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_ARCH_FSL_LS2085A=y CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_QCOM=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y @@ -48,7 +49,7 @@ CONFIG_CMDLINE="console=ttyAMA0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y CONFIG_CPU_IDLE=y -CONFIG_ARM64_CPUIDLE=y +CONFIG_ARM_CPUIDLE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -83,6 +84,9 @@ CONFIG_VIRTIO_NET=y CONFIG_NET_XGENE=y CONFIG_SMC91X=y CONFIG_SMSC911X=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_PLUSB=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set @@ -93,16 +97,30 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_VIRTIO_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y CONFIG_SPI=y CONFIG_SPI_PL022=y +CONFIG_SPMI=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_GPIO_PL061=y CONFIG_GPIO_XGENE=y +CONFIG_POWER_RESET_MSM=y # CONFIG_HWMON is not set +CONFIG_MFD_QCOM_RPM=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_THERMAL=y +CONFIG_QCOM_TSENS=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_RPM=y +CONFIG_REGULATOR_RPM_SMD=y CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -110,25 +128,66 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_ACM=y +CONFIG_USB_PRINTER=y +CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y +CONFIG_USB_UAS=y +CONFIG_USBIP_CORE=y +CONFIG_USBIP_HOST=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_TEST=m +CONFIG_USB_HSIC_USB3503=y +CONFIG_USB_MSM_OTG=y CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_VERBOSE=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_USB_CONFIGFS=m +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_USB_G_SERIAL=m CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_XGENE=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_MSM_GCC_8916=y +CONFIG_QCOM_RPMCC=y +CONFIG_REMOTE_SPINLOCK_MSM=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_QCOM_GSBI=y +CONFIG_MSM_SMD=y +CONFIG_MSM_SMD_DEBUG=y +CONFIG_MSM_RPM_SMD=y +CONFIG_MSM_SMEM=y +CONFIG_EXTCON=y +CONFIG_EXTCON_USB_GPIO=y CONFIG_PHY_XGENE=y +CONFIG_EEPROM=y +CONFIG_QCOM_QFPROM=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h index c60643f14cda..141b2fcabaa6 100644 --- a/arch/arm64/include/asm/cpuidle.h +++ b/arch/arm64/include/asm/cpuidle.h @@ -4,10 +4,10 @@ #include <asm/proc-fns.h> #ifdef CONFIG_CPU_IDLE -extern int cpu_init_idle(unsigned int cpu); +extern int arm_cpuidle_init(unsigned int cpu); extern int cpu_suspend(unsigned long arg); #else -static inline int cpu_init_idle(unsigned int cpu) +static inline int arm_cpuidle_init(unsigned int cpu) { return -EOPNOTSUPP; } @@ -17,5 +17,8 @@ static inline int cpu_suspend(unsigned long arg) return -EOPNOTSUPP; } #endif - +static inline int arm_cpuidle_suspend(int index) +{ + return cpu_suspend(index); +} #endif diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c index 5c0896647fd1..a78143a5c99f 100644 --- a/arch/arm64/kernel/cpuidle.c +++ b/arch/arm64/kernel/cpuidle.c @@ -15,7 +15,7 @@ #include <asm/cpuidle.h> #include <asm/cpu_ops.h> -int cpu_init_idle(unsigned int cpu) +int arm_cpuidle_init(unsigned int cpu) { int ret = -EOPNOTSUPP; struct device_node *cpu_node = of_cpu_device_node_get(cpu); diff --git a/drivers/Kconfig b/drivers/Kconfig index 7d233c1a61b9..6767a2fc3294 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -184,4 +184,6 @@ source "drivers/thunderbolt/Kconfig" source "drivers/android/Kconfig" +source "drivers/eeprom/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 527a6da8d539..57eb5b0ab9b8 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -165,3 +165,4 @@ obj-$(CONFIG_RAS) += ras/ obj-$(CONFIG_THUNDERBOLT) += thunderbolt/ obj-$(CONFIG_CORESIGHT) += coresight/ obj-$(CONFIG_ANDROID) += android/ +obj-$(CONFIG_EEPROM) += eeprom/ diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index dbfe6a69c3da..1c885fb6e16a 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -2613,6 +2613,29 @@ int regmap_get_val_bytes(struct regmap *map) } EXPORT_SYMBOL_GPL(regmap_get_val_bytes); +/* + * regmap_get_max_register(): Report the max register value + * + * Report the max register value, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_max_register(struct regmap *map) +{ + return map->max_register ? : -EINVAL; +} +EXPORT_SYMBOL_GPL(regmap_get_max_register); + + /* regmap_get_reg_stride(): Report the register address stride + * + * Report the register address stride, mainly intended to for use by + * generic infrastructure built on top of regmap. + */ +int regmap_get_reg_stride(struct regmap *map) +{ + return map->reg_stride; +} +EXPORT_SYMBOL_GPL(regmap_get_reg_stride); + int regmap_parse_val(struct regmap *map, const void *buf, unsigned int *val) { diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 69a094c3783d..70a05c7f0fb1 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -29,35 +29,24 @@ #define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) -static u8 clk_mux_get_parent(struct clk_hw *hw) +unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, + unsigned int *table, unsigned long flags) { - struct clk_mux *mux = to_clk_mux(hw); int num_parents = __clk_get_num_parents(hw->clk); - u32 val; - /* - * FIXME need a mux-specific flag to determine if val is bitwise or numeric - * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 - * to 0x7 (index starts at one) - * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so - * val = 0x4 really means "bit 2, index starts at bit 0" - */ - val = clk_readl(mux->reg) >> mux->shift; - val &= mux->mask; - - if (mux->table) { + if (table) { int i; for (i = 0; i < num_parents; i++) - if (mux->table[i] == val) + if (table[i] == val) return i; return -EINVAL; } - if (val && (mux->flags & CLK_MUX_INDEX_BIT)) + if (val && (flags & CLK_MUX_INDEX_BIT)) val = ffs(val) - 1; - if (val && (mux->flags & CLK_MUX_INDEX_ONE)) + if (val && (flags & CLK_MUX_INDEX_ONE)) val--; if (val >= num_parents) @@ -65,24 +54,53 @@ static u8 clk_mux_get_parent(struct clk_hw *hw) return val; } +EXPORT_SYMBOL_GPL(clk_mux_get_parent); -static int clk_mux_set_parent(struct clk_hw *hw, u8 index) +static u8 _clk_mux_get_parent(struct clk_hw *hw) { struct clk_mux *mux = to_clk_mux(hw); u32 val; - unsigned long flags = 0; - if (mux->table) - index = mux->table[index]; + /* + * FIXME need a mux-specific flag to determine if val is bitwise or numeric + * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 + * to 0x7 (index starts at one) + * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so + * val = 0x4 really means "bit 2, index starts at bit 0" + */ + val = clk_readl(mux->reg) >> mux->shift; + val &= mux->mask; + + return clk_mux_get_parent(hw, val, mux->table, mux->flags); +} - else { - if (mux->flags & CLK_MUX_INDEX_BIT) - index = 1 << index; +unsigned int clk_mux_reindex(u8 index, unsigned int *table, + unsigned long flags) +{ + unsigned int val = index; - if (mux->flags & CLK_MUX_INDEX_ONE) - index++; + if (table) { + val = table[val]; + } else { + if (flags & CLK_MUX_INDEX_BIT) + val = 1 << index; + + if (flags & CLK_MUX_INDEX_ONE) + val++; } + return val; +} +EXPORT_SYMBOL_GPL(clk_mux_reindex); + +static int clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + unsigned long flags = 0; + + index = clk_mux_reindex(index, mux->table, mux->flags); + if (mux->lock) spin_lock_irqsave(mux->lock, flags); @@ -102,21 +120,21 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index) } const struct clk_ops clk_mux_ops = { - .get_parent = clk_mux_get_parent, + .get_parent = _clk_mux_get_parent, .set_parent = clk_mux_set_parent, .determine_rate = __clk_mux_determine_rate, }; EXPORT_SYMBOL_GPL(clk_mux_ops); const struct clk_ops clk_mux_ro_ops = { - .get_parent = clk_mux_get_parent, + .get_parent = _clk_mux_get_parent, }; EXPORT_SYMBOL_GPL(clk_mux_ro_ops); struct clk *clk_register_mux_table(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u32 mask, - u8 clk_mux_flags, u32 *table, spinlock_t *lock) + u8 clk_mux_flags, unsigned int *table, spinlock_t *lock) { struct clk_mux *mux; struct clk *clk; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 237f23f68bfc..4b8052c56ff6 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -56,9 +56,12 @@ struct clk_core { struct clk_core **parents; u8 num_parents; u8 new_parent_index; + u8 safe_parent_index; unsigned long rate; unsigned long req_rate; + unsigned long old_rate; unsigned long new_rate; + struct clk_core *safe_parent; struct clk_core *new_parent; struct clk_core *new_child; unsigned long flags; @@ -1549,7 +1552,8 @@ out: static void clk_calc_subtree(struct clk_core *clk, unsigned long new_rate, struct clk_core *new_parent, u8 p_index) { - struct clk_core *child; + struct clk_core *child, *parent; + struct clk_hw *parent_hw; clk->new_rate = new_rate; clk->new_parent = new_parent; @@ -1559,6 +1563,18 @@ static void clk_calc_subtree(struct clk_core *clk, unsigned long new_rate, if (new_parent && new_parent != clk->parent) new_parent->new_child = clk; + if (clk->ops->get_safe_parent) { + parent_hw = clk->ops->get_safe_parent(clk->hw); + if (parent_hw) { + parent = parent_hw->core; + p_index = clk_fetch_parent_index(clk, parent); + clk->safe_parent_index = p_index; + clk->safe_parent = parent; + } + } else { + clk->safe_parent = NULL; + } + hlist_for_each_entry(child, &clk->children, child_node) { child->new_rate = clk_recalc(child, new_rate); clk_calc_subtree(child, child->new_rate, NULL, 0); @@ -1654,14 +1670,43 @@ static struct clk_core *clk_propagate_rate_change(struct clk_core *clk, unsigned long event) { struct clk_core *child, *tmp_clk, *fail_clk = NULL; + struct clk_core *old_parent; int ret = NOTIFY_DONE; - if (clk->rate == clk->new_rate) + if (clk->rate == clk->new_rate && event != POST_RATE_CHANGE) return NULL; + switch (event) { + case PRE_RATE_CHANGE: + if (clk->safe_parent) + clk->ops->set_parent(clk->hw, clk->safe_parent_index); + clk->old_rate = clk->rate; + break; + case POST_RATE_CHANGE: + if (clk->safe_parent) { + old_parent = __clk_set_parent_before(clk, + clk->new_parent); + if (clk->ops->set_rate_and_parent) { + clk->ops->set_rate_and_parent(clk->hw, + clk->new_rate, + clk->new_parent ? + clk->new_parent->rate : 0, + clk->new_parent_index); + } else if (clk->ops->set_parent) { + clk->ops->set_parent(clk->hw, + clk->new_parent_index); + } + __clk_set_parent_after(clk, clk->new_parent, + old_parent); + } + break; + } + if (clk->notifier_count) { - ret = __clk_notify(clk, event, clk->rate, clk->new_rate); - if (ret & NOTIFY_STOP_MASK) + if (event != POST_RATE_CHANGE || clk->old_rate != clk->rate) + ret = __clk_notify(clk, event, clk->old_rate, + clk->new_rate); + if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE) fail_clk = clk; } @@ -1688,23 +1733,27 @@ static struct clk_core *clk_propagate_rate_change(struct clk_core *clk, * walk down a subtree and set the new rates notifying the rate * change on the way */ -static void clk_change_rate(struct clk_core *clk) +static void +clk_change_rate(struct clk_core *clk, unsigned long best_parent_rate) { struct clk_core *child; struct hlist_node *tmp; unsigned long old_rate; - unsigned long best_parent_rate = 0; bool skip_set_rate = false; struct clk_core *old_parent; - old_rate = clk->rate; + hlist_for_each_entry(child, &clk->children, child_node) { + /* Skip children who will be reparented to another clock */ + if (child->new_parent && child->new_parent != clk) + continue; + if (child->new_rate > child->rate) + clk_change_rate(child, clk->new_rate); + } - if (clk->new_parent) - best_parent_rate = clk->new_parent->rate; - else if (clk->parent) - best_parent_rate = clk->parent->rate; + old_rate = clk->rate; - if (clk->new_parent && clk->new_parent != clk->parent) { + if (clk->new_parent && clk->new_parent != clk->parent && + !clk->safe_parent) { old_parent = __clk_set_parent_before(clk, clk->new_parent); if (clk->ops->set_rate_and_parent) { @@ -1722,10 +1771,7 @@ static void clk_change_rate(struct clk_core *clk) if (!skip_set_rate && clk->ops->set_rate) clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate); - clk->rate = clk_recalc(clk, best_parent_rate); - - if (clk->notifier_count && old_rate != clk->rate) - __clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate); + clk->rate = clk->new_rate; /* * Use safe iteration, as change_rate can actually swap parents @@ -1735,12 +1781,13 @@ static void clk_change_rate(struct clk_core *clk) /* Skip children who will be reparented to another clock */ if (child->new_parent && child->new_parent != clk) continue; - clk_change_rate(child); + if (child->new_rate != child->rate) + clk_change_rate(child, clk->new_rate); } /* handle the new child who might not be in clk->children yet */ - if (clk->new_child) - clk_change_rate(clk->new_child); + if (clk->new_child && clk->new_child->new_rate != clk->new_child->rate) + clk_change_rate(clk->new_child, clk->new_rate); } static int clk_core_set_rate_nolock(struct clk_core *clk, @@ -1749,6 +1796,7 @@ static int clk_core_set_rate_nolock(struct clk_core *clk, struct clk_core *top, *fail_clk; unsigned long rate = req_rate; int ret = 0; + unsigned long parent_rate; if (!clk) return 0; @@ -1774,11 +1822,18 @@ static int clk_core_set_rate_nolock(struct clk_core *clk, return -EBUSY; } + if (top->parent) + parent_rate = top->parent->rate; + else + parent_rate = 0; + /* change the rates */ - clk_change_rate(top); + clk_change_rate(top, parent_rate); clk->req_rate = req_rate; + clk_propagate_rate_change(top, POST_RATE_CHANGE); + return ret; } diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 0d7ab52b7ab0..4106c00986d0 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -6,6 +6,7 @@ config COMMON_CLK_QCOM config APQ_GCC_8084 tristate "APQ8084 Global Clock Controller" + select QCOM_GDSC depends on COMMON_CLK_QCOM help Support for the global clock controller on apq8084 devices. @@ -15,6 +16,7 @@ config APQ_GCC_8084 config APQ_MMCC_8084 tristate "APQ8084 Multimedia Clock Controller" select APQ_GCC_8084 + select QCOM_GDSC depends on COMMON_CLK_QCOM help Support for the multimedia clock controller on apq8084 devices. @@ -38,6 +40,11 @@ config IPQ_LCC_806X Say Y if you want to use audio devices such as i2s, pcm, S/PDIF, etc. +config QCOM_GDSC + bool + select PM_GENERIC_DOMAINS if PM + depends on COMMON_CLK_QCOM + config MSM_GCC_8660 tristate "MSM8660 Global Clock Controller" depends on COMMON_CLK_QCOM @@ -46,6 +53,15 @@ config MSM_GCC_8660 Say Y if you want to use peripheral devices such as UART, SPI, i2c, USB, SD/eMMC, etc. +config MSM_GCC_8916 + tristate "MSM8916 Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on msm8916 devices. + Say Y if you want to use devices such as UART, SPI i2c, USB, + SD/eMMC, display, graphics, camera etc. + config MSM_GCC_8960 tristate "APQ8064/MSM8960 Global Clock Controller" depends on COMMON_CLK_QCOM @@ -74,6 +90,7 @@ config MSM_MMCC_8960 config MSM_GCC_8974 tristate "MSM8974 Global Clock Controller" + select QCOM_GDSC depends on COMMON_CLK_QCOM help Support for the global clock controller on msm8974 devices. @@ -83,8 +100,45 @@ config MSM_GCC_8974 config MSM_MMCC_8974 tristate "MSM8974 Multimedia Clock Controller" select MSM_GCC_8974 + select QCOM_GDSC depends on COMMON_CLK_QCOM help Support for the multimedia clock controller on msm8974 devices. Say Y if you want to support multimedia devices such as display, graphics, video encode/decode, camera, etc. + +config QCOM_HFPLL + tristate "High-Frequency PLL (HFPLL) Clock Controller" + depends on COMMON_CLK_QCOM + help + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + +config KPSS_XCC + tristate "KPSS Clock Controller" + depends on COMMON_CLK_QCOM + help + Support for the Krait ACC and GCC clock controllers. Say Y + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + +config KRAITCC + tristate "Krait Clock Controller" + depends on COMMON_CLK_QCOM && ARM + select KRAIT_CLOCKS + help + Support for the Krait CPU clocks on Qualcomm devices. + Say Y if you want to support CPU frequency scaling. + +config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS + +config QCOM_RPMCC + tristate "Qualcomm RPM Clock Controller" + depends on COMMON_CLK_QCOM + help + Support for the RPM clock controller which controls fabric clocks + on SoCs like APQ8064. + Say Y if you want to use fabric clocks like AFAB, DAYTONA etc. diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 617826469595..54f92789bef6 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -8,15 +8,23 @@ clk-qcom-y += clk-rcg2.o clk-qcom-y += clk-branch.o clk-qcom-y += clk-regmap-divider.o clk-qcom-y += clk-regmap-mux.o +clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o +clk-qcom-y += clk-hfpll.o clk-qcom-y += reset.o +clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o +obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o +obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o +obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +obj-$(CONFIG_KRAITCC) += krait-cc.o +obj-$(CONFIG_QCOM_RPMCC) += clk-rpm.o diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c new file mode 100644 index 000000000000..367eb95f1477 --- /dev/null +++ b/drivers/clk/qcom/clk-hfpll.c @@ -0,0 +1,253 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk-provider.h> +#include <linux/spinlock.h> + +#include "clk-regmap.h" +#include "clk-hfpll.h" + +#define PLL_OUTCTRL BIT(0) +#define PLL_BYPASSNL BIT(1) +#define PLL_RESET_N BIT(2) + +/* Initialize a HFPLL at a given rate and enable it. */ +static void __clk_hfpll_init_once(struct clk_hw *hw) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + + if (likely(h->init_done)) + return; + + /* Configure PLL parameters for integer mode. */ + if (hd->config_val) + regmap_write(regmap, hd->config_reg, hd->config_val); + regmap_write(regmap, hd->m_reg, 0); + regmap_write(regmap, hd->n_reg, 1); + + if (hd->user_reg) { + u32 regval = hd->user_val; + unsigned long rate; + + rate = __clk_get_rate(hw->clk); + + /* Pick the right VCO. */ + if (hd->user_vco_mask && rate > hd->low_vco_max_rate) + regval |= hd->user_vco_mask; + regmap_write(regmap, hd->user_reg, regval); + } + + if (hd->droop_reg) + regmap_write(regmap, hd->droop_reg, hd->droop_val); + + h->init_done = true; +} + +static void __clk_hfpll_enable(struct clk_hw *hw) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + u32 val; + + __clk_hfpll_init_once(hw); + + /* Disable PLL bypass mode. */ + regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL); + + /* + * H/W requires a 5us delay between disabling the bypass and + * de-asserting the reset. Delay 10us just to be safe. + */ + udelay(10); + + /* De-assert active-low PLL reset. */ + regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); + + /* Wait for PLL to lock. */ + if (hd->status_reg) { + do { + regmap_read(regmap, hd->status_reg, &val); + } while (!(val & BIT(hd->lock_bit))); + } else { + udelay(60); + } + + /* Enable PLL output. */ + regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); +} + +/* Enable an already-configured HFPLL. */ +static int clk_hfpll_enable(struct clk_hw *hw) +{ + unsigned long flags; + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + u32 mode; + + spin_lock_irqsave(&h->lock, flags); + regmap_read(regmap, hd->mode_reg, &mode); + if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL))) + __clk_hfpll_enable(hw); + spin_unlock_irqrestore(&h->lock, flags); + + return 0; +} + +static void __clk_hfpll_disable(struct clk_hfpll *h) +{ + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + + /* + * Disable the PLL output, disable test mode, enable the bypass mode, + * and assert the reset. + */ + regmap_update_bits(regmap, hd->mode_reg, + PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0); +} + +static void clk_hfpll_disable(struct clk_hw *hw) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + unsigned long flags; + + spin_lock_irqsave(&h->lock, flags); + __clk_hfpll_disable(h); + spin_unlock_irqrestore(&h->lock, flags); +} + +static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + unsigned long rrate; + + rate = clamp(rate, hd->min_rate, hd->max_rate); + + rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate; + if (rrate > hd->max_rate) + rrate -= *parent_rate; + + return rrate; +} + +/* + * For optimization reasons, assumes no downstream clocks are actively using + * it. + */ +static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + unsigned long flags; + u32 l_val, val; + bool enabled; + + l_val = rate / parent_rate; + + spin_lock_irqsave(&h->lock, flags); + + enabled = __clk_is_enabled(hw->clk); + if (enabled) + __clk_hfpll_disable(h); + + /* Pick the right VCO. */ + if (hd->user_reg && hd->user_vco_mask) { + regmap_read(regmap, hd->user_reg, &val); + if (rate <= hd->low_vco_max_rate) + val &= ~hd->user_vco_mask; + else + val |= hd->user_vco_mask; + regmap_write(regmap, hd->user_reg, val); + } + + regmap_write(regmap, hd->l_reg, l_val); + + if (enabled) + __clk_hfpll_enable(hw); + + spin_unlock_irqrestore(&h->lock, flags); + + return 0; +} + +static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + u32 l_val; + + regmap_read(regmap, hd->l_reg, &l_val); + + return l_val * parent_rate; +} + +static void clk_hfpll_init(struct clk_hw *hw) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + u32 mode, status; + + regmap_read(regmap, hd->mode_reg, &mode); + if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) { + __clk_hfpll_init_once(hw); + return; + } + + if (hd->status_reg) { + regmap_read(regmap, hd->status_reg, &status); + if (!(status & BIT(hd->lock_bit))) { + WARN(1, "HFPLL %s is ON, but not locked!\n", + __clk_get_name(hw->clk)); + clk_hfpll_disable(hw); + __clk_hfpll_init_once(hw); + } + } +} + +static int hfpll_is_enabled(struct clk_hw *hw) +{ + struct clk_hfpll *h = to_clk_hfpll(hw); + struct hfpll_data const *hd = h->d; + struct regmap *regmap = h->clkr.regmap; + u32 mode; + + regmap_read(regmap, hd->mode_reg, &mode); + mode &= 0x7; + return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL); +} + +const struct clk_ops clk_ops_hfpll = { + .enable = clk_hfpll_enable, + .disable = clk_hfpll_disable, + .is_enabled = hfpll_is_enabled, + .round_rate = clk_hfpll_round_rate, + .set_rate = clk_hfpll_set_rate, + .recalc_rate = clk_hfpll_recalc_rate, + .init = clk_hfpll_init, +}; +EXPORT_SYMBOL_GPL(clk_ops_hfpll); diff --git a/drivers/clk/qcom/clk-hfpll.h b/drivers/clk/qcom/clk-hfpll.h new file mode 100644 index 000000000000..48c18d664f4e --- /dev/null +++ b/drivers/clk/qcom/clk-hfpll.h @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_CLK_HFPLL_H__ +#define __QCOM_CLK_HFPLL_H__ + +#include <linux/clk-provider.h> +#include <linux/spinlock.h> +#include "clk-regmap.h" + +struct hfpll_data { + u32 mode_reg; + u32 l_reg; + u32 m_reg; + u32 n_reg; + u32 user_reg; + u32 droop_reg; + u32 config_reg; + u32 status_reg; + u8 lock_bit; + + u32 droop_val; + u32 config_val; + u32 user_val; + u32 user_vco_mask; + unsigned long low_vco_max_rate; + + unsigned long min_rate; + unsigned long max_rate; +}; + +struct clk_hfpll { + struct hfpll_data const *d; + int init_done; + + struct clk_regmap clkr; + spinlock_t lock; +}; + +#define to_clk_hfpll(_hw) \ + container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr) + +extern const struct clk_ops clk_ops_hfpll; + +#endif diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c new file mode 100644 index 000000000000..6506730d085e --- /dev/null +++ b/drivers/clk/qcom/clk-krait.c @@ -0,0 +1,166 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk-provider.h> +#include <linux/spinlock.h> + +#include <asm/krait-l2-accessors.h> + +#include "clk-krait.h" + +/* Secondary and primary muxes share the same cp15 register */ +static DEFINE_SPINLOCK(krait_clock_reg_lock); + +#define LPL_SHIFT 8 +static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) +{ + unsigned long flags; + u32 regval; + + spin_lock_irqsave(&krait_clock_reg_lock, flags); + regval = krait_get_l2_indirect_reg(mux->offset); + regval &= ~(mux->mask << mux->shift); + regval |= (sel & mux->mask) << mux->shift; + if (mux->lpl) { + regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); + regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); + } + krait_set_l2_indirect_reg(mux->offset, regval); + spin_unlock_irqrestore(&krait_clock_reg_lock, flags); + + /* Wait for switch to complete. */ + mb(); + udelay(1); +} + +static int krait_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + u32 sel; + + sel = clk_mux_reindex(index, mux->parent_map, 0); + mux->en_mask = sel; + /* Don't touch mux if CPU is off as it won't work */ + if (__clk_is_enabled(hw->clk)) + __krait_mux_set_sel(mux, sel); + return 0; +} + +static u8 krait_mux_get_parent(struct clk_hw *hw) +{ + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + u32 sel; + + sel = krait_get_l2_indirect_reg(mux->offset); + sel >>= mux->shift; + sel &= mux->mask; + mux->en_mask = sel; + + return clk_mux_get_parent(hw, sel, mux->parent_map, 0); +} + +static struct clk_hw *krait_mux_get_safe_parent(struct clk_hw *hw) +{ + int i; + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + int num_parents = __clk_get_num_parents(hw->clk); + + i = mux->safe_sel; + for (i = 0; i < num_parents; i++) + if (mux->safe_sel == mux->parent_map[i]) + break; + + return __clk_get_hw(clk_get_parent_by_index(hw->clk, i)); +} + +static int krait_mux_enable(struct clk_hw *hw) +{ + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + + __krait_mux_set_sel(mux, mux->en_mask); + + return 0; +} + +static void krait_mux_disable(struct clk_hw *hw) +{ + struct krait_mux_clk *mux = to_krait_mux_clk(hw); + + __krait_mux_set_sel(mux, mux->safe_sel); +} + +const struct clk_ops krait_mux_clk_ops = { + .enable = krait_mux_enable, + .disable = krait_mux_disable, + .set_parent = krait_mux_set_parent, + .get_parent = krait_mux_get_parent, + .determine_rate = __clk_mux_determine_rate_closest, + .get_safe_parent = krait_mux_get_safe_parent, +}; +EXPORT_SYMBOL_GPL(krait_mux_clk_ops); + +/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ +static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + *parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), rate * 2); + return DIV_ROUND_UP(*parent_rate, 2); +} + +static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct krait_div2_clk *d = to_krait_div2_clk(hw); + unsigned long flags; + u32 val; + u32 mask = BIT(d->width) - 1; + + if (d->lpl) + mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; + + spin_lock_irqsave(&krait_clock_reg_lock, flags); + val = krait_get_l2_indirect_reg(d->offset); + val &= ~mask; + krait_set_l2_indirect_reg(d->offset, val); + spin_unlock_irqrestore(&krait_clock_reg_lock, flags); + + return 0; +} + +static unsigned long +krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct krait_div2_clk *d = to_krait_div2_clk(hw); + u32 mask = BIT(d->width) - 1; + u32 div; + + div = krait_get_l2_indirect_reg(d->offset); + div >>= d->shift; + div &= mask; + div = (div + 1) * 2; + + return DIV_ROUND_UP(parent_rate, div); +} + +const struct clk_ops krait_div2_clk_ops = { + .round_rate = krait_div2_round_rate, + .set_rate = krait_div2_set_rate, + .recalc_rate = krait_div2_recalc_rate, +}; +EXPORT_SYMBOL_GPL(krait_div2_clk_ops); diff --git a/drivers/clk/qcom/clk-krait.h b/drivers/clk/qcom/clk-krait.h new file mode 100644 index 000000000000..5d0063538e5d --- /dev/null +++ b/drivers/clk/qcom/clk-krait.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __QCOM_CLK_KRAIT_H +#define __QCOM_CLK_KRAIT_H + +#include <linux/clk-provider.h> + +struct krait_mux_clk { + unsigned int *parent_map; + bool has_safe_parent; + u8 safe_sel; + u32 offset; + u32 mask; + u32 shift; + u32 en_mask; + bool lpl; + + struct clk_hw hw; +}; + +#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw) + +extern const struct clk_ops krait_mux_clk_ops; + +struct krait_div2_clk { + u32 offset; + u8 width; + u32 shift; + bool lpl; + + struct clk_hw hw; +}; + +#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) + +extern const struct clk_ops krait_div2_clk_ops; + +#endif diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index 0039bd7d3965..db529c8ce3d1 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -47,15 +47,20 @@ static u8 clk_rcg_get_parent(struct clk_hw *hw) struct clk_rcg *rcg = to_clk_rcg(hw); int num_parents = __clk_get_num_parents(hw->clk); u32 ns; - int i; + int i, ret; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); + ret = regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); + if (ret) + goto err; ns = ns_to_src(&rcg->s, ns); for (i = 0; i < num_parents; i++) - if (ns == rcg->s.parent_map[i]) + if (ns == rcg->s.parent_map[i].cfg) return i; - return -EINVAL; +err: + pr_debug("%s: Clock %s has invalid parent, using default.\n", + __func__, __clk_get_name(hw->clk)); + return 0; } static int reg_to_bank(struct clk_dyn_rcg *rcg, u32 bank) @@ -70,21 +75,28 @@ static u8 clk_dyn_rcg_get_parent(struct clk_hw *hw) int num_parents = __clk_get_num_parents(hw->clk); u32 ns, reg; int bank; - int i; + int i, ret; struct src_sel *s; - regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + ret = regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + if (ret) + goto err; bank = reg_to_bank(rcg, reg); s = &rcg->s[bank]; - regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + ret = regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + if (ret) + goto err; ns = ns_to_src(s, ns); for (i = 0; i < num_parents; i++) - if (ns == s->parent_map[i]) + if (ns == s->parent_map[i].cfg) return i; - return -EINVAL; +err: + pr_debug("%s: Clock %s has invalid parent, using default.\n", + __func__, __clk_get_name(hw->clk)); + return 0; } static int clk_rcg_set_parent(struct clk_hw *hw, u8 index) @@ -93,7 +105,7 @@ static int clk_rcg_set_parent(struct clk_hw *hw, u8 index) u32 ns; regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - ns = src_to_ns(&rcg->s, rcg->s.parent_map[index], ns); + ns = src_to_ns(&rcg->s, rcg->s.parent_map[index].cfg, ns); regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); return 0; @@ -191,10 +203,10 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val) return val; } -static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) +static int configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) { u32 ns, md, reg; - int bank, new_bank; + int bank, new_bank, ret, index; struct mn *mn; struct pre_div *p; struct src_sel *s; @@ -206,38 +218,55 @@ static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) enabled = __clk_is_enabled(hw->clk); - regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + ret = regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + if (ret) + return ret; bank = reg_to_bank(rcg, reg); new_bank = enabled ? !bank : bank; ns_reg = rcg->ns_reg[new_bank]; - regmap_read(rcg->clkr.regmap, ns_reg, &ns); + ret = regmap_read(rcg->clkr.regmap, ns_reg, &ns); + if (ret) + return ret; if (banked_mn) { mn = &rcg->mn[new_bank]; md_reg = rcg->md_reg[new_bank]; ns |= BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; - regmap_read(rcg->clkr.regmap, md_reg, &md); + ret = regmap_read(rcg->clkr.regmap, md_reg, &md); + if (ret) + return ret; md = mn_to_md(mn, f->m, f->n, md); - regmap_write(rcg->clkr.regmap, md_reg, md); - + ret = regmap_write(rcg->clkr.regmap, md_reg, md); + if (ret) + return ret; ns = mn_to_ns(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; /* Two NS registers means mode control is in NS register */ if (rcg->ns_reg[0] != rcg->ns_reg[1]) { ns = mn_to_reg(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; } else { reg = mn_to_reg(mn, f->m, f->n, reg); - regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + ret = regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + if (ret) + return ret; } ns &= ~BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; } if (banked_p) { @@ -246,14 +275,24 @@ static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) } s = &rcg->s[new_bank]; - ns = src_to_ns(s, s->parent_map[f->src], ns); - regmap_write(rcg->clkr.regmap, ns_reg, ns); + index = qcom_find_src_index(hw, s->parent_map, f->src); + if (index < 0) + return index; + ns = src_to_ns(s, s->parent_map[index].cfg, ns); + ret = regmap_write(rcg->clkr.regmap, ns_reg, ns); + if (ret) + return ret; if (enabled) { - regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + ret = regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + if (ret) + return ret; reg ^= BIT(rcg->mux_sel_bit); - regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + ret = regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + if (ret) + return ret; } + return 0; } static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) @@ -279,10 +318,8 @@ static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) if (banked_p) f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; - f.src = index; - configure_bank(rcg, &f); - - return 0; + f.src = qcom_find_src_index(hw, rcg->s[bank].parent_map, index); + return configure_bank(rcg, &f); } /* @@ -373,13 +410,19 @@ static long _freq_tbl_determine_rate(struct clk_hw *hw, { unsigned long clk_flags; struct clk *p; + struct clk_rcg *rcg = to_clk_rcg(hw); + int index; f = qcom_find_freq(f, rate); if (!f) return -EINVAL; + index = qcom_find_src_index(hw, rcg->s.parent_map, f->src); + if (index < 0) + return index; + clk_flags = __clk_get_flags(hw->clk); - p = clk_get_parent_by_index(hw->clk, f->src); + p = clk_get_parent_by_index(hw->clk, index); if (clk_flags & CLK_SET_RATE_PARENT) { rate = rate * f->pre_div; if (f->n) { @@ -424,8 +467,9 @@ static long clk_rcg_bypass_determine_rate(struct clk_hw *hw, unsigned long rate, struct clk_rcg *rcg = to_clk_rcg(hw); const struct freq_tbl *f = rcg->freq_tbl; struct clk *p; + int index = qcom_find_src_index(hw, rcg->s.parent_map, f->src); - p = clk_get_parent_by_index(hw->clk, f->src); + p = clk_get_parent_by_index(hw->clk, index); *p_hw = __clk_get_hw(p); *p_rate = __clk_round_rate(p, rate); @@ -504,9 +548,7 @@ static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate) if (!f) return -EINVAL; - configure_bank(rcg, f); - - return 0; + return configure_bank(rcg, f); } static int clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h index 687e41f91d7c..319ba949350d 100644 --- a/drivers/clk/qcom/clk-rcg.h +++ b/drivers/clk/qcom/clk-rcg.h @@ -26,6 +26,16 @@ struct freq_tbl { }; /** + * struct parent_map - map table for PLL source select configuration values + * @src: source PLL + * @cfg: configuration value + */ +struct parent_map { + u8 src; + u8 cfg; +}; + +/** * struct mn - M/N:D counter * @mnctr_en_bit: bit to enable mn counter * @mnctr_reset_bit: bit to assert mn counter reset @@ -65,7 +75,7 @@ struct pre_div { struct src_sel { u8 src_sel_shift; #define SRC_SEL_MASK 0x7 - const u8 *parent_map; + const struct parent_map *parent_map; }; /** @@ -150,7 +160,7 @@ struct clk_rcg2 { u32 cmd_rcgr; u8 mnd_width; u8 hid_width; - const u8 *parent_map; + const struct parent_map *parent_map; const struct freq_tbl *freq_tbl; struct clk_regmap clkr; }; diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index 742acfa18d63..08e7bdf922d3 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -69,16 +69,19 @@ static u8 clk_rcg2_get_parent(struct clk_hw *hw) ret = regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &cfg); if (ret) - return ret; + goto err; cfg &= CFG_SRC_SEL_MASK; cfg >>= CFG_SRC_SEL_SHIFT; for (i = 0; i < num_parents; i++) - if (cfg == rcg->parent_map[i]) + if (cfg == rcg->parent_map[i].cfg) return i; - return -EINVAL; +err: + pr_debug("%s: Clock %s has invalid parent, using default.\n", + __func__, __clk_get_name(hw->clk)); + return 0; } static int update_config(struct clk_rcg2 *rcg) @@ -114,7 +117,7 @@ static int clk_rcg2_set_parent(struct clk_hw *hw, u8 index) ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, CFG_SRC_SEL_MASK, - rcg->parent_map[index] << CFG_SRC_SEL_SHIFT); + rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT); if (ret) return ret; @@ -179,13 +182,19 @@ static long _freq_tbl_determine_rate(struct clk_hw *hw, { unsigned long clk_flags; struct clk *p; + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + int index; f = qcom_find_freq(f, rate); if (!f) return -EINVAL; + index = qcom_find_src_index(hw, rcg->parent_map, f->src); + if (index < 0) + return index; + clk_flags = __clk_get_flags(hw->clk); - p = clk_get_parent_by_index(hw->clk, f->src); + p = clk_get_parent_by_index(hw->clk, index); if (clk_flags & CLK_SET_RATE_PARENT) { if (f->pre_div) { rate /= 2; @@ -219,7 +228,11 @@ static long clk_rcg2_determine_rate(struct clk_hw *hw, unsigned long rate, static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) { u32 cfg, mask; - int ret; + struct clk_hw *hw = &rcg->clkr.hw; + int ret, index = qcom_find_src_index(hw, rcg->parent_map, f->src); + + if (index < 0) + return index; if (rcg->mnd_width && f->n) { mask = BIT(rcg->mnd_width) - 1; @@ -242,7 +255,7 @@ static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f) mask = BIT(rcg->hid_width) - 1; mask |= CFG_SRC_SEL_MASK | CFG_MODE_MASK; cfg = f->pre_div << CFG_SRC_DIV_SHIFT; - cfg |= rcg->parent_map[f->src] << CFG_SRC_SEL_SHIFT; + cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT; if (rcg->mnd_width && f->n) cfg |= CFG_MODE_DUAL_EDGE; ret = regmap_update_bits(rcg->clkr.regmap, @@ -374,9 +387,10 @@ static long clk_edp_pixel_determine_rate(struct clk_hw *hw, unsigned long rate, s64 request; u32 mask = BIT(rcg->hid_width) - 1; u32 hid_div; + int index = qcom_find_src_index(hw, rcg->parent_map, f->src); /* Force the correct parent */ - *p = __clk_get_hw(clk_get_parent_by_index(hw->clk, f->src)); + *p = __clk_get_hw(clk_get_parent_by_index(hw->clk, index)); if (src_rate == 810000000) frac = frac_table_810m; @@ -420,6 +434,7 @@ static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate, { struct clk_rcg2 *rcg = to_clk_rcg2(hw); const struct freq_tbl *f = rcg->freq_tbl; + int index = qcom_find_src_index(hw, rcg->parent_map, f->src); unsigned long parent_rate, div; u32 mask = BIT(rcg->hid_width) - 1; struct clk *p; @@ -427,7 +442,7 @@ static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate, if (rate == 0) return -EINVAL; - p = clk_get_parent_by_index(hw->clk, f->src); + p = clk_get_parent_by_index(hw->clk, index); *p_hw = __clk_get_hw(p); *p_rate = parent_rate = __clk_round_rate(p, rate); @@ -489,7 +504,8 @@ static long clk_pixel_determine_rate(struct clk_hw *hw, unsigned long rate, int delta = 100000; const struct freq_tbl *f = rcg->freq_tbl; const struct frac_entry *frac = frac_table_pixel; - struct clk *parent = clk_get_parent_by_index(hw->clk, f->src); + int index = qcom_find_src_index(hw, rcg->parent_map, f->src); + struct clk *parent = clk_get_parent_by_index(hw->clk, index); *p = __clk_get_hw(parent); @@ -518,7 +534,8 @@ static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate, int delta = 100000; u32 mask = BIT(rcg->hid_width) - 1; u32 hid_div; - struct clk *parent = clk_get_parent_by_index(hw->clk, f.src); + int index = qcom_find_src_index(hw, rcg->parent_map, f.src); + struct clk *parent = clk_get_parent_by_index(hw->clk, index); for (; frac->num; frac++) { request = (rate * frac->den) / frac->num; diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c new file mode 100644 index 000000000000..c9107e3723db --- /dev/null +++ b/drivers/clk/qcom/clk-rpm.c @@ -0,0 +1,373 @@ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/mfd/qcom_rpm.h> +#include <dt-bindings/mfd/qcom-rpm.h> + +struct rpm_cc { + struct clk_onecell_data data; + struct clk *clks[]; +}; +struct rpm_clk { + const int rpm_clk_id; + struct qcom_rpm *rpm; + unsigned last_set_khz; + bool enabled; + bool branch; /* true: RPM only accepts 1 for ON and 0 for OFF */ + unsigned factor; + struct clk_hw hw; +}; + +#define to_rpm_clk(_hw) container_of(_hw, struct rpm_clk, hw) + +static int rpm_clk_prepare(struct clk_hw *hw) +{ + struct rpm_clk *r = to_rpm_clk(hw); + uint32_t value; + int rc = 0; + unsigned long this_khz; + + this_khz = r->last_set_khz; + /* Don't send requests to the RPM if the rate has not been set. */ + if (r->last_set_khz == 0) + goto out; + + value = this_khz; + if (r->branch) + value = !!value; + + rc = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, + r->rpm_clk_id, &value, 1); + if (rc) + goto out; + +out: + if (!rc) + r->enabled = true; + return rc; +} + +static void rpm_clk_unprepare(struct clk_hw *hw) +{ + struct rpm_clk *r = to_rpm_clk(hw); + + if (r->last_set_khz) { + uint32_t value = 0; + int rc; + + rc = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, + r->rpm_clk_id, &value, 1); + if (rc) + return; + + } + r->enabled = false; +} + +int rpm_clk_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long prate) +{ + struct rpm_clk *r = to_rpm_clk(hw); + unsigned long this_khz; + int rc = 0; + + this_khz = DIV_ROUND_UP(rate, r->factor); + + if (r->enabled) { + uint32_t value = this_khz; + + rc = qcom_rpm_write(r->rpm, QCOM_RPM_ACTIVE_STATE, + r->rpm_clk_id, &value, 1); + if (rc) + goto out; + } + + if (!rc) + r->last_set_khz = this_khz; + +out: + return rc; +} + +static long rpm_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + return rate; +} + +static unsigned long rpm_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rpm_clk *r = to_rpm_clk(hw); + u32 val; + int rc; + + rc = qcom_rpm_read(r->rpm, r->rpm_clk_id, &val, 1); + if (rc < 0) + return 0; + + return val * r->factor; +} + +static unsigned long rpm_branch_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rpm_clk *r = to_rpm_clk(hw); + + return r->last_set_khz * r->factor; +} + +static const struct clk_ops branch_clk_ops_rpm = { + .prepare = rpm_clk_prepare, + .unprepare = rpm_clk_unprepare, + .recalc_rate = rpm_branch_clk_recalc_rate, + .round_rate = rpm_clk_round_rate, +}; + +static const struct clk_ops clk_ops_rpm = { + .prepare = rpm_clk_prepare, + .unprepare = rpm_clk_unprepare, + .set_rate = rpm_clk_set_rate, + .recalc_rate = rpm_clk_recalc_rate, + .round_rate = rpm_clk_round_rate, +}; + +static struct rpm_clk pxo_clk = { + .rpm_clk_id = QCOM_RPM_PXO_CLK, + .branch = true, + .factor = 1000, + .last_set_khz = 27000, + .hw.init = &(struct clk_init_data){ + .name = "pxo", + .ops = &branch_clk_ops_rpm, + }, +}; + +static struct rpm_clk cxo_clk = { + .rpm_clk_id = QCOM_RPM_CXO_CLK, + .branch = true, + .factor = 1000, + .last_set_khz = 19200, + .hw.init = &(struct clk_init_data){ + .name = "cxo", + .ops = &branch_clk_ops_rpm, + }, +}; + +static struct rpm_clk afab_clk = { + .rpm_clk_id = QCOM_RPM_APPS_FABRIC_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "afab_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk cfpb_clk = { + .rpm_clk_id = QCOM_RPM_CFPB_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "cfpb_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk daytona_clk = { + .rpm_clk_id = QCOM_RPM_DAYTONA_FABRIC_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "daytona_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk ebi1_clk = { + .rpm_clk_id = QCOM_RPM_EBI1_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "ebi1_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk mmfab_clk = { + .rpm_clk_id = QCOM_RPM_MM_FABRIC_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "mmfab_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk mmfpb_clk = { + .rpm_clk_id = QCOM_RPM_MMFPB_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "mmfpb_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk sfab_clk = { + .rpm_clk_id = QCOM_RPM_SYS_FABRIC_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "sfab_clk", + .ops = &clk_ops_rpm, + }, +}; + +static struct rpm_clk sfpb_clk = { + .rpm_clk_id = QCOM_RPM_SFPB_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "sfpb_clk", + .ops = &clk_ops_rpm, + }, +}; + +/* +static struct rpm_clk qdss_clk = { + .rpm_clk_id = QCOM_RPM_QDSS_CLK, + .factor = 1000, + .hw.init = &(struct clk_init_data){ + .name = "qdss_clk", + .ops = &clk_ops_rpm, + }, +}; +*/ + +struct rpm_clk *rpm_clks[] = { + [QCOM_RPM_PXO_CLK] = &pxo_clk, + [QCOM_RPM_CXO_CLK] = &cxo_clk, + [QCOM_RPM_APPS_FABRIC_CLK] = &afab_clk, + [QCOM_RPM_CFPB_CLK] = &cfpb_clk, + [QCOM_RPM_DAYTONA_FABRIC_CLK] = &daytona_clk, + [QCOM_RPM_EBI1_CLK] = &ebi1_clk, + [QCOM_RPM_MM_FABRIC_CLK] = &mmfab_clk, + [QCOM_RPM_MMFPB_CLK] = &mmfpb_clk, + [QCOM_RPM_SYS_FABRIC_CLK] = &sfab_clk, + [QCOM_RPM_SFPB_CLK] = &sfpb_clk, +/** [QCOM_RPM_QDSS_CLK] = &qdss_clk, Needs more checking here **/ +}; + +static int rpm_clk_probe(struct platform_device *pdev) +{ + struct clk **clks; + struct clk *clk; + struct rpm_cc *cc; + struct qcom_rpm *rpm; + int num_clks = ARRAY_SIZE(rpm_clks); + struct clk_onecell_data *data; + int i; + + if (!pdev->dev.of_node) + return -ENODEV; + + cc = devm_kzalloc(&pdev->dev, sizeof(*cc) + sizeof(*clks) * num_clks, + GFP_KERNEL); + if (!cc) + return -ENOMEM; + + clks = cc->clks; + data = &cc->data; + data->clks = clks; + data->clk_num = num_clks; + + rpm = dev_get_drvdata(pdev->dev.parent); + if (!rpm) { + dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); + return -ENODEV; + } + + for (i = 0; i < num_clks; i++) { + if (!rpm_clks[i]) { + clks[i] = ERR_PTR(-ENOENT); + continue; + } + rpm_clks[i]->rpm = rpm; + clk = devm_clk_register(&pdev->dev, &rpm_clks[i]->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clks[i] = clk; + } + + return of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get, + data); +} + +static int rpm_clk_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + return 0; +} + +static const struct of_device_id rpm_clk_of_match[] = { + { .compatible = "qcom,apq8064-rpm-clk" }, + { }, +}; + +static struct platform_driver rpm_clk_driver = { + .driver = { + .name = "qcom-rpm-clk", + .of_match_table = rpm_clk_of_match, + }, + .probe = rpm_clk_probe, + .remove = rpm_clk_remove, +}; + +/* dummy handoff clk handling... */ +static int rpm_clk_ho_probe(struct platform_device *pdev) +{ + int i, max_clks; + struct clk *clk; + max_clks = of_count_phandle_with_args(pdev->dev.of_node, + "clocks", "#clock-cells"); + + for (i = 0; i < max_clks; i++) { + clk = of_clk_get(pdev->dev.of_node, i); + + if (IS_ERR(clk)) + break; + + clk_prepare_enable(clk); + } + return 0; +} + +static const struct of_device_id rpm_clk_ho_of_match[] = { + { .compatible = "qcom,apq8064-rpmcc-handoff" }, + { }, +}; + +static struct platform_driver rpm_clk_ho_driver = { + .driver = { + .name = "qcom-rpm-clk-handoff", + .of_match_table = rpm_clk_ho_of_match, + }, + .probe = rpm_clk_ho_probe, +}; + +static int __init rpm_clk_init(void) +{ + platform_driver_register(&rpm_clk_driver); + return platform_driver_register(&rpm_clk_ho_driver); +} +subsys_initcall(rpm_clk_init); + +static void __exit rpm_clk_exit(void) +{ + platform_driver_unregister(&rpm_clk_ho_driver); + platform_driver_unregister(&rpm_clk_driver); +} +module_exit(rpm_clk_exit) + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>"); +MODULE_DESCRIPTION("Driver for the RPM clocks"); diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c index e20d947db3e5..277667913db9 100644 --- a/drivers/clk/qcom/common.c +++ b/drivers/clk/qcom/common.c @@ -21,6 +21,7 @@ #include "clk-rcg.h" #include "clk-regmap.h" #include "reset.h" +#include "gdsc.h" struct qcom_cc { struct qcom_reset_controller reset; @@ -43,6 +44,18 @@ struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate) } EXPORT_SYMBOL_GPL(qcom_find_freq); +int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map, u8 src) +{ + int i, num_parents = __clk_get_num_parents(hw->clk); + + for (i = 0; i < num_parents; i++) + if (src == map[i].src) + return i; + + return -ENOENT; +} +EXPORT_SYMBOL_GPL(qcom_find_src_index); + struct regmap * qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc) { @@ -108,8 +121,20 @@ int qcom_cc_really_probe(struct platform_device *pdev, ret = reset_controller_register(&reset->rcdev); if (ret) - of_clk_del_provider(dev->of_node); + goto err_reset; + + if (desc->gdscs && desc->num_gdscs) { + ret = gdsc_register(dev, desc->gdscs, desc->num_gdscs, regmap); + if (ret) + goto err_pd; + } + return 0; +err_pd: + dev_err(dev, "Failed to register power domains\n"); + reset_controller_unregister(&reset->rcdev); +err_reset: + of_clk_del_provider(dev->of_node); return ret; } EXPORT_SYMBOL_GPL(qcom_cc_really_probe); @@ -128,6 +153,7 @@ EXPORT_SYMBOL_GPL(qcom_cc_probe); void qcom_cc_remove(struct platform_device *pdev) { + gdsc_unregister(&pdev->dev); of_clk_del_provider(pdev->dev.of_node); reset_controller_unregister(platform_get_drvdata(pdev)); } diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h index f519322acdf3..2892b71fbd71 100644 --- a/drivers/clk/qcom/common.h +++ b/drivers/clk/qcom/common.h @@ -19,6 +19,8 @@ struct clk_regmap; struct qcom_reset_map; struct regmap; struct freq_tbl; +struct clk_hw; +struct parent_map; struct qcom_cc_desc { const struct regmap_config *config; @@ -26,10 +28,14 @@ struct qcom_cc_desc { size_t num_clks; const struct qcom_reset_map *resets; size_t num_resets; + struct gdsc **gdscs; + size_t num_gdscs; }; extern const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate); +extern int qcom_find_src_index(struct clk_hw *hw, const struct parent_map *map, + u8 src); extern struct regmap *qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc); diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c index e3ef90264214..f010ffc9dc93 100644 --- a/drivers/clk/qcom/gcc-apq8084.c +++ b/drivers/clk/qcom/gcc-apq8084.c @@ -31,19 +31,22 @@ #include "clk-rcg.h" #include "clk-branch.h" #include "reset.h" +#include "gdsc.h" -#define P_XO 0 -#define P_GPLL0 1 -#define P_GPLL1 1 -#define P_GPLL4 2 -#define P_PCIE_0_1_PIPE_CLK 1 -#define P_SATA_ASIC0_CLK 1 -#define P_SATA_RX_CLK 1 -#define P_SLEEP_CLK 1 +enum { + P_XO, + P_GPLL0, + P_GPLL1, + P_GPLL4, + P_PCIE_0_1_PIPE_CLK, + P_SATA_ASIC0_CLK, + P_SATA_RX_CLK, + P_SLEEP_CLK, +}; -static const u8 gcc_xo_gpll0_map[] = { - [P_XO] = 0, - [P_GPLL0] = 1, +static const struct parent_map gcc_xo_gpll0_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 } }; static const char *gcc_xo_gpll0[] = { @@ -51,10 +54,10 @@ static const char *gcc_xo_gpll0[] = { "gpll0_vote", }; -static const u8 gcc_xo_gpll0_gpll4_map[] = { - [P_XO] = 0, - [P_GPLL0] = 1, - [P_GPLL4] = 5, +static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL4, 5 } }; static const char *gcc_xo_gpll0_gpll4[] = { @@ -63,9 +66,9 @@ static const char *gcc_xo_gpll0_gpll4[] = { "gpll4_vote", }; -static const u8 gcc_xo_sata_asic0_map[] = { - [P_XO] = 0, - [P_SATA_ASIC0_CLK] = 2, +static const struct parent_map gcc_xo_sata_asic0_map[] = { + { P_XO, 0 }, + { P_SATA_ASIC0_CLK, 2 } }; static const char *gcc_xo_sata_asic0[] = { @@ -73,9 +76,9 @@ static const char *gcc_xo_sata_asic0[] = { "sata_asic0_clk", }; -static const u8 gcc_xo_sata_rx_map[] = { - [P_XO] = 0, - [P_SATA_RX_CLK] = 2, +static const struct parent_map gcc_xo_sata_rx_map[] = { + { P_XO, 0 }, + { P_SATA_RX_CLK, 2} }; static const char *gcc_xo_sata_rx[] = { @@ -83,9 +86,9 @@ static const char *gcc_xo_sata_rx[] = { "sata_rx_clk", }; -static const u8 gcc_xo_pcie_map[] = { - [P_XO] = 0, - [P_PCIE_0_1_PIPE_CLK] = 2, +static const struct parent_map gcc_xo_pcie_map[] = { + { P_XO, 0 }, + { P_PCIE_0_1_PIPE_CLK, 2 } }; static const char *gcc_xo_pcie[] = { @@ -93,9 +96,9 @@ static const char *gcc_xo_pcie[] = { "pcie_pipe", }; -static const u8 gcc_xo_pcie_sleep_map[] = { - [P_XO] = 0, - [P_SLEEP_CLK] = 6, +static const struct parent_map gcc_xo_pcie_sleep_map[] = { + { P_XO, 0 }, + { P_SLEEP_CLK, 6 } }; static const char *gcc_xo_pcie_sleep[] = { @@ -1263,9 +1266,9 @@ static const struct freq_tbl ftbl_gcc_usb_hsic_clk[] = { { } }; -static u8 usb_hsic_clk_src_map[] = { - [P_XO] = 0, - [P_GPLL1] = 4, +static const struct parent_map usb_hsic_clk_src_map[] = { + { P_XO, 0 }, + { P_GPLL1, 4 } }; static struct clk_rcg2 usb_hsic_clk_src = { @@ -3251,6 +3254,34 @@ static struct clk_branch gcc_usb_hsic_system_clk = { }, }; +static struct gdsc usb_hs_hsic_gdsc = { + .gdscr = 0x404, + .pd = { + .name = "usb_hs_hsic", + }, +}; + +static struct gdsc pcie0_gdsc = { + .gdscr = 0x1ac4, + .pd = { + .name = "pcie0", + }, +}; + +static struct gdsc pcie1_gdsc = { + .gdscr = 0x1b44, + .pd = { + .name = "pcie1", + }, +}; + +static struct gdsc usb30_gdsc = { + .gdscr = 0x1e84, + .pd = { + .name = "usb30", + }, +}; + static struct clk_regmap *gcc_apq8084_clocks[] = { [GPLL0] = &gpll0.clkr, [GPLL0_VOTE] = &gpll0_vote, @@ -3444,6 +3475,13 @@ static struct clk_regmap *gcc_apq8084_clocks[] = { [GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr, }; +static struct gdsc *gcc_apq8084_gdscs[] = { + [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc, + [PCIE0_GDSC] = &pcie0_gdsc, + [PCIE1_GDSC] = &pcie1_gdsc, + [USB30_GDSC] = &usb30_gdsc, +}; + static const struct qcom_reset_map gcc_apq8084_resets[] = { [GCC_SYSTEM_NOC_BCR] = { 0x0100 }, [GCC_CONFIG_NOC_BCR] = { 0x0140 }, @@ -3552,6 +3590,8 @@ static const struct qcom_cc_desc gcc_apq8084_desc = { .num_clks = ARRAY_SIZE(gcc_apq8084_clocks), .resets = gcc_apq8084_resets, .num_resets = ARRAY_SIZE(gcc_apq8084_resets), + .gdscs = gcc_apq8084_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_apq8084_gdscs), }; static const struct of_device_id gcc_apq8084_match_table[] = { diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c index cbdc31dea7f4..d56f29311877 100644 --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c @@ -30,6 +30,7 @@ #include "clk-pll.h" #include "clk-rcg.h" #include "clk-branch.h" +#include "clk-hfpll.h" #include "reset.h" static struct clk_pll pll0 = { @@ -113,6 +114,85 @@ static struct clk_regmap pll8_vote = { }, }; +static struct hfpll_data hfpll0_data = { + .mode_reg = 0x3200, + .l_reg = 0x3208, + .m_reg = 0x320c, + .n_reg = 0x3210, + .config_reg = 0x3204, + .status_reg = 0x321c, + .config_val = 0x7845c665, + .droop_reg = 0x3214, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll0 = { + .d = &hfpll0_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll0", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), +}; + +static struct hfpll_data hfpll1_data = { + .mode_reg = 0x3240, + .l_reg = 0x3248, + .m_reg = 0x324c, + .n_reg = 0x3250, + .config_reg = 0x3244, + .status_reg = 0x325c, + .config_val = 0x7845c665, + .droop_reg = 0x3314, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll1 = { + .d = &hfpll1_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll1", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), +}; + +static struct hfpll_data hfpll_l2_data = { + .mode_reg = 0x3300, + .l_reg = 0x3308, + .m_reg = 0x330c, + .n_reg = 0x3310, + .config_reg = 0x3304, + .status_reg = 0x331c, + .config_val = 0x7845c665, + .droop_reg = 0x3314, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll_l2 = { + .d = &hfpll_l2_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll_l2", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), +}; + + static struct clk_pll pll14 = { .l_reg = 0x31c4, .m_reg = 0x31c8, @@ -140,15 +220,17 @@ static struct clk_regmap pll14_vote = { }, }; -#define P_PXO 0 -#define P_PLL8 1 -#define P_PLL3 1 -#define P_PLL0 2 -#define P_CXO 2 +enum { + P_PXO, + P_PLL8, + P_PLL3, + P_PLL0, + P_CXO, +}; -static const u8 gcc_pxo_pll8_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, +static const struct parent_map gcc_pxo_pll8_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 } }; static const char *gcc_pxo_pll8[] = { @@ -156,10 +238,10 @@ static const char *gcc_pxo_pll8[] = { "pll8_vote", }; -static const u8 gcc_pxo_pll8_cxo_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, - [P_CXO] = 5, +static const struct parent_map gcc_pxo_pll8_cxo_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 }, + { P_CXO, 5 } }; static const char *gcc_pxo_pll8_cxo[] = { @@ -168,14 +250,14 @@ static const char *gcc_pxo_pll8_cxo[] = { "cxo", }; -static const u8 gcc_pxo_pll3_map[] = { - [P_PXO] = 0, - [P_PLL3] = 1, +static const struct parent_map gcc_pxo_pll3_map[] = { + { P_PXO, 0 }, + { P_PLL3, 1 } }; -static const u8 gcc_pxo_pll3_sata_map[] = { - [P_PXO] = 0, - [P_PLL3] = 6, +static const struct parent_map gcc_pxo_pll3_sata_map[] = { + { P_PXO, 0 }, + { P_PLL3, 6 } }; static const char *gcc_pxo_pll3[] = { @@ -183,10 +265,10 @@ static const char *gcc_pxo_pll3[] = { "pll3", }; -static const u8 gcc_pxo_pll8_pll0[] = { - [P_PXO] = 0, - [P_PLL8] = 3, - [P_PLL0] = 2, +static const struct parent_map gcc_pxo_pll8_pll0[] = { + { P_PXO, 0 }, + { P_PLL8, 3 }, + { P_PLL0, 2 } }; static const char *gcc_pxo_pll8_pll0_map[] = { @@ -2273,6 +2355,9 @@ static struct clk_regmap *gcc_ipq806x_clks[] = { [USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr, [USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr, [USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr, + [PLL9] = &hfpll0.clkr, + [PLL10] = &hfpll1.clkr, + [PLL12] = &hfpll_l2.clkr, }; static const struct qcom_reset_map gcc_ipq806x_resets[] = { diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c index f366e68f7316..fc6b12da5b30 100644 --- a/drivers/clk/qcom/gcc-msm8660.c +++ b/drivers/clk/qcom/gcc-msm8660.c @@ -59,13 +59,15 @@ static struct clk_regmap pll8_vote = { }, }; -#define P_PXO 0 -#define P_PLL8 1 -#define P_CXO 2 +enum { + P_PXO, + P_PLL8, + P_CXO, +}; -static const u8 gcc_pxo_pll8_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, +static const struct parent_map gcc_pxo_pll8_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 } }; static const char *gcc_pxo_pll8[] = { @@ -73,10 +75,10 @@ static const char *gcc_pxo_pll8[] = { "pll8_vote", }; -static const u8 gcc_pxo_pll8_cxo_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, - [P_CXO] = 5, +static const struct parent_map gcc_pxo_pll8_cxo_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 }, + { P_CXO, 5 } }; static const char *gcc_pxo_pll8_cxo[] = { diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c new file mode 100644 index 000000000000..d799be978465 --- /dev/null +++ b/drivers/clk/qcom/gcc-msm8916.c @@ -0,0 +1,2906 @@ +/* + * Copyright 2015 Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> +#include <linux/reset-controller.h> + +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/reset/qcom,gcc-msm8916.h> + +#include "common.h" +#include "clk-regmap.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-branch.h" +#include "reset.h" +#include "gdsc.h" + +enum { + P_XO, + P_GPLL0, + P_GPLL0_AUX, + P_BIMC, + P_GPLL1, + P_GPLL1_AUX, + P_GPLL2, + P_GPLL2_AUX, + P_SLEEP_CLK, + P_DSI0_PHYPLL_BYTE, + P_DSI0_PHYPLL_DSI, +}; + +static const struct parent_map gcc_xo_gpll0_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, +}; + +static const char *gcc_xo_gpll0[] = { + "xo", + "gpll0_vote", +}; + +static const struct parent_map gcc_xo_gpll0_bimc_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_BIMC, 2 }, +}; + +static const char *gcc_xo_gpll0_bimc[] = { + "xo", + "gpll0_vote", + "bimc_pll_vote", +}; + +static const struct parent_map gcc_xo_gpll0a_gpll1_gpll2a_map[] = { + { P_XO, 0 }, + { P_GPLL0_AUX, 3 }, + { P_GPLL2_AUX, 2 }, + { P_GPLL1, 1 }, +}; + +static const char *gcc_xo_gpll0a_gpll1_gpll2a[] = { + "xo", + "gpll0_vote", + "gpll1_vote", + "gpll2_vote", +}; + +static const struct parent_map gcc_xo_gpll0_gpll2_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL2, 2 }, +}; + +static const char *gcc_xo_gpll0_gpll2[] = { + "xo", + "gpll0_vote", + "gpll2_vote", +}; + +static const struct parent_map gcc_xo_gpll0a_map[] = { + { P_XO, 0 }, + { P_GPLL0_AUX, 2 }, +}; + +static const char *gcc_xo_gpll0a[] = { + "xo", + "gpll0_vote", +}; + +static const struct parent_map gcc_xo_gpll0_gpll1a_sleep_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL1_AUX, 2 }, + { P_SLEEP_CLK, 6 }, +}; + +static const char *gcc_xo_gpll0_gpll1a_sleep[] = { + "xo", + "gpll0_vote", + "gpll1_vote", + "sleep_clk", +}; + +static const struct parent_map gcc_xo_gpll0_gpll1a_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL1_AUX, 2 }, +}; + +static const char *gcc_xo_gpll0_gpll1a[] = { + "xo", + "gpll0_vote", + "gpll1_vote", +}; + +static const struct parent_map gcc_xo_dsibyte_map[] = { + { P_XO, 0, }, + { P_DSI0_PHYPLL_BYTE, 2 }, +}; + +static const char *gcc_xo_dsibyte[] = { + "xo", + "dsi0pllbyte", +}; + +static const struct parent_map gcc_xo_gpll0a_dsibyte_map[] = { + { P_XO, 0 }, + { P_GPLL0_AUX, 2 }, + { P_DSI0_PHYPLL_BYTE, 1 }, +}; + +static const char *gcc_xo_gpll0a_dsibyte[] = { + "xo", + "gpll0_vote", + "dsi0pllbyte", +}; + +static const struct parent_map gcc_xo_gpll0_dsiphy_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_DSI0_PHYPLL_DSI, 2 }, +}; + +static const char *gcc_xo_gpll0_dsiphy[] = { + "xo", + "gpll0_vote", + "dsi0pll", +}; + +static const struct parent_map gcc_xo_gpll0a_dsiphy_map[] = { + { P_XO, 0 }, + { P_GPLL0_AUX, 2 }, + { P_DSI0_PHYPLL_DSI, 1 }, +}; + +static const char *gcc_xo_gpll0a_dsiphy[] = { + "xo", + "gpll0_vote", + "dsi0pll", +}; + +static const struct parent_map gcc_xo_gpll0a_gpll1_gpll2_map[] = { + { P_XO, 0 }, + { P_GPLL0_AUX, 1 }, + { P_GPLL1, 3 }, + { P_GPLL2, 2 }, +}; + +static const char *gcc_xo_gpll0a_gpll1_gpll2[] = { + "xo", + "gpll0_vote", + "gpll1_vote", + "gpll2_vote", +}; + +#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } + +static struct clk_pll gpll0 = { + .l_reg = 0x21004, + .m_reg = 0x21008, + .n_reg = 0x2100c, + .config_reg = 0x21014, + .mode_reg = 0x21000, + .status_reg = 0x2101c, + .status_bit = 17, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll0", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap gpll0_vote = { + .enable_reg = 0x45000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gpll0_vote", + .parent_names = (const char *[]){ "gpll0" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + +static struct clk_pll gpll1 = { + .l_reg = 0x20004, + .m_reg = 0x20008, + .n_reg = 0x2000c, + .config_reg = 0x20014, + .mode_reg = 0x20000, + .status_reg = 0x2001c, + .status_bit = 17, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll1", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap gpll1_vote = { + .enable_reg = 0x45000, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gpll1_vote", + .parent_names = (const char *[]){ "gpll1" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + +static struct clk_pll gpll2 = { + .l_reg = 0x4a004, + .m_reg = 0x4a008, + .n_reg = 0x4a00c, + .config_reg = 0x4a014, + .mode_reg = 0x4a000, + .status_reg = 0x4a01c, + .status_bit = 17, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gpll2", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap gpll2_vote = { + .enable_reg = 0x45000, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gpll2_vote", + .parent_names = (const char *[]){ "gpll2" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + +static struct clk_pll bimc_pll = { + .l_reg = 0x23004, + .m_reg = 0x23008, + .n_reg = 0x2300c, + .config_reg = 0x23014, + .mode_reg = 0x23000, + .status_reg = 0x2301c, + .status_bit = 17, + .clkr.hw.init = &(struct clk_init_data){ + .name = "bimc_pll", + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap bimc_pll_vote = { + .enable_reg = 0x45000, + .enable_mask = BIT(3), + .hw.init = &(struct clk_init_data){ + .name = "bimc_pll_vote", + .parent_names = (const char *[]){ "bimc_pll" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + +static struct clk_rcg2 pcnoc_bfdcd_clk_src = { + .cmd_rcgr = 0x27000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_bimc_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pcnoc_bfdcd_clk_src", + .parent_names = gcc_xo_gpll0_bimc, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 system_noc_bfdcd_clk_src = { + .cmd_rcgr = 0x26004, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_bimc_map, + .clkr.hw.init = &(struct clk_init_data){ + .name = "system_noc_bfdcd_clk_src", + .parent_names = gcc_xo_gpll0_bimc, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_ahb_clk[] = { + F(40000000, P_GPLL0, 10, 1, 2), + F(80000000, P_GPLL0, 10, 0, 0), + { } +}; + +static struct clk_rcg2 camss_ahb_clk_src = { + .cmd_rcgr = 0x5a000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_camss_ahb_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "camss_ahb_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_apss_ahb_clk[] = { + F(19200000, P_XO, 1, 0, 0), + F(50000000, P_GPLL0, 16, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(133330000, P_GPLL0, 6, 0, 0), + { } +}; + +static struct clk_rcg2 apss_ahb_clk_src = { + .cmd_rcgr = 0x46000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_apss_ahb_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apss_ahb_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_csi0_1_clk[] = { + F(100000000, P_GPLL0, 8, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 csi0_clk_src = { + .cmd_rcgr = 0x4e020, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_camss_csi0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "csi0_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 csi1_clk_src = { + .cmd_rcgr = 0x4f020, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_camss_csi0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "csi1_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_oxili_gfx3d_clk[] = { + F(19200000, P_XO, 1, 0, 0), + F(50000000, P_GPLL0_AUX, 16, 0, 0), + F(80000000, P_GPLL0_AUX, 10, 0, 0), + F(100000000, P_GPLL0_AUX, 8, 0, 0), + F(160000000, P_GPLL0_AUX, 5, 0, 0), + F(177780000, P_GPLL0_AUX, 4.5, 0, 0), + F(200000000, P_GPLL0_AUX, 4, 0, 0), + F(266670000, P_GPLL0_AUX, 3, 0, 0), + F(294912000, P_GPLL1, 3, 0, 0), + F(310000000, P_GPLL2, 3, 0, 0), + F(400000000, P_GPLL0_AUX, 2, 0, 0), + { } +}; + +static struct clk_rcg2 gfx3d_clk_src = { + .cmd_rcgr = 0x59000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_gpll1_gpll2a_map, + .freq_tbl = ftbl_gcc_oxili_gfx3d_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gfx3d_clk_src", + .parent_names = gcc_xo_gpll0a_gpll1_gpll2a, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_vfe0_clk[] = { + F(50000000, P_GPLL0, 16, 0, 0), + F(80000000, P_GPLL0, 10, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(160000000, P_GPLL0, 5, 0, 0), + F(177780000, P_GPLL0, 4.5, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + F(266670000, P_GPLL0, 3, 0, 0), + F(320000000, P_GPLL0, 2.5, 0, 0), + F(400000000, P_GPLL0, 2, 0, 0), + F(465000000, P_GPLL2, 2, 0, 0), + { } +}; + +static struct clk_rcg2 vfe0_clk_src = { + .cmd_rcgr = 0x58000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_map, + .freq_tbl = ftbl_gcc_camss_vfe0_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "vfe0_clk_src", + .parent_names = gcc_xo_gpll0_gpll2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_blsp1_qup1_6_i2c_apps_clk[] = { + F(19200000, P_XO, 1, 0, 0), + F(50000000, P_GPLL0, 16, 0, 0), + { } +}; + +static struct clk_rcg2 blsp1_qup1_i2c_apps_clk_src = { + .cmd_rcgr = 0x0200c, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_blsp1_qup1_6_spi_apps_clk[] = { + F(960000, P_XO, 10, 1, 2), + F(4800000, P_XO, 4, 0, 0), + F(9600000, P_XO, 2, 0, 0), + F(16000000, P_GPLL0, 10, 1, 5), + F(19200000, P_XO, 1, 0, 0), + F(25000000, P_GPLL0, 16, 1, 2), + F(50000000, P_GPLL0, 16, 0, 0), + { } +}; + +static struct clk_rcg2 blsp1_qup1_spi_apps_clk_src = { + .cmd_rcgr = 0x02024, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup1_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup2_i2c_apps_clk_src = { + .cmd_rcgr = 0x03000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup2_spi_apps_clk_src = { + .cmd_rcgr = 0x03014, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup2_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup3_i2c_apps_clk_src = { + .cmd_rcgr = 0x04000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup3_spi_apps_clk_src = { + .cmd_rcgr = 0x04024, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup3_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup4_i2c_apps_clk_src = { + .cmd_rcgr = 0x05000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup4_spi_apps_clk_src = { + .cmd_rcgr = 0x05024, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup4_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup5_i2c_apps_clk_src = { + .cmd_rcgr = 0x06000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup5_spi_apps_clk_src = { + .cmd_rcgr = 0x06024, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup5_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup6_i2c_apps_clk_src = { + .cmd_rcgr = 0x07000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_i2c_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_i2c_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_qup6_spi_apps_clk_src = { + .cmd_rcgr = 0x07024, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_qup1_6_spi_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_qup6_spi_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_blsp1_uart1_6_apps_clk[] = { + F(3686400, P_GPLL0, 1, 72, 15625), + F(7372800, P_GPLL0, 1, 144, 15625), + F(14745600, P_GPLL0, 1, 288, 15625), + F(16000000, P_GPLL0, 10, 1, 5), + F(19200000, P_XO, 1, 0, 0), + F(24000000, P_GPLL0, 1, 3, 100), + F(25000000, P_GPLL0, 16, 1, 2), + F(32000000, P_GPLL0, 1, 1, 25), + F(40000000, P_GPLL0, 1, 1, 20), + F(46400000, P_GPLL0, 1, 29, 500), + F(48000000, P_GPLL0, 1, 3, 50), + F(51200000, P_GPLL0, 1, 8, 125), + F(56000000, P_GPLL0, 1, 7, 100), + F(58982400, P_GPLL0, 1, 1152, 15625), + F(60000000, P_GPLL0, 1, 3, 40), + { } +}; + +static struct clk_rcg2 blsp1_uart1_apps_clk_src = { + .cmd_rcgr = 0x02044, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_uart1_6_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart1_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 blsp1_uart2_apps_clk_src = { + .cmd_rcgr = 0x03034, + .mnd_width = 16, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_blsp1_uart1_6_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "blsp1_uart2_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_cci_clk[] = { + F(19200000, P_XO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 cci_clk_src = { + .cmd_rcgr = 0x51000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_map, + .freq_tbl = ftbl_gcc_camss_cci_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "cci_clk_src", + .parent_names = gcc_xo_gpll0a, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_gp0_1_clk[] = { + F(100000000, P_GPLL0, 8, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 camss_gp0_clk_src = { + .cmd_rcgr = 0x54000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_camss_gp0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "camss_gp0_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 camss_gp1_clk_src = { + .cmd_rcgr = 0x55000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_camss_gp0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "camss_gp1_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_jpeg0_clk[] = { + F(133330000, P_GPLL0, 6, 0, 0), + F(266670000, P_GPLL0, 3, 0, 0), + F(320000000, P_GPLL0, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 jpeg0_clk_src = { + .cmd_rcgr = 0x57000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_camss_jpeg0_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "jpeg0_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_mclk0_1_clk[] = { + F(9600000, P_XO, 2, 0, 0), + F(23880000, P_GPLL0, 1, 2, 67), + F(66670000, P_GPLL0, 12, 0, 0), + { } +}; + +static struct clk_rcg2 mclk0_clk_src = { + .cmd_rcgr = 0x52000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_camss_mclk0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "mclk0_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 mclk1_clk_src = { + .cmd_rcgr = 0x53000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_camss_mclk0_1_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "mclk1_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_csi0_1phytimer_clk[] = { + F(100000000, P_GPLL0, 8, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 csi0phytimer_clk_src = { + .cmd_rcgr = 0x4e000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_map, + .freq_tbl = ftbl_gcc_camss_csi0_1phytimer_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "csi0phytimer_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 csi1phytimer_clk_src = { + .cmd_rcgr = 0x4f000, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_map, + .freq_tbl = ftbl_gcc_camss_csi0_1phytimer_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "csi1phytimer_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_camss_cpp_clk[] = { + F(160000000, P_GPLL0, 5, 0, 0), + F(320000000, P_GPLL0, 2.5, 0, 0), + F(465000000, P_GPLL2, 2, 0, 0), + { } +}; + +static struct clk_rcg2 cpp_clk_src = { + .cmd_rcgr = 0x58018, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll2_map, + .freq_tbl = ftbl_gcc_camss_cpp_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "cpp_clk_src", + .parent_names = gcc_xo_gpll0_gpll2, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_crypto_clk[] = { + F(50000000, P_GPLL0, 16, 0, 0), + F(80000000, P_GPLL0, 10, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(160000000, P_GPLL0, 5, 0, 0), + { } +}; + +static struct clk_rcg2 crypto_clk_src = { + .cmd_rcgr = 0x16004, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_crypto_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "crypto_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_gp1_3_clk[] = { + F(19200000, P_XO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 gp1_clk_src = { + .cmd_rcgr = 0x08004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_gp1_3_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp1_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp2_clk_src = { + .cmd_rcgr = 0x09004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_gp1_3_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp2_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_rcg2 gp3_clk_src = { + .cmd_rcgr = 0x0a004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_gpll1a_sleep_map, + .freq_tbl = ftbl_gcc_gp1_3_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "gp3_clk_src", + .parent_names = gcc_xo_gpll0_gpll1a_sleep, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct freq_tbl ftbl_gcc_mdss_byte0_clk[] = { + { .src = P_DSI0_PHYPLL_BYTE }, + { } +}; + +static struct clk_rcg2 byte0_clk_src = { + .cmd_rcgr = 0x4d044, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_dsibyte_map, + .freq_tbl = ftbl_gcc_mdss_byte0_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "byte0_clk_src", + .parent_names = gcc_xo_gpll0a_dsibyte, + .num_parents = 3, + .ops = &clk_byte_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_gcc_mdss_esc0_clk[] = { + F(19200000, P_XO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 esc0_clk_src = { + .cmd_rcgr = 0x4d05c, + .hid_width = 5, + .parent_map = gcc_xo_dsibyte_map, + .freq_tbl = ftbl_gcc_mdss_esc0_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "esc0_clk_src", + .parent_names = gcc_xo_dsibyte, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_mdss_mdp_clk[] = { + F(50000000, P_GPLL0, 16, 0, 0), + F(80000000, P_GPLL0, 10, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(160000000, P_GPLL0, 5, 0, 0), + F(177780000, P_GPLL0, 4.5, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + F(266670000, P_GPLL0, 3, 0, 0), + F(320000000, P_GPLL0, 2.5, 0, 0), + { } +}; + +static struct clk_rcg2 mdp_clk_src = { + .cmd_rcgr = 0x4d014, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_dsiphy_map, + .freq_tbl = ftbl_gcc_mdss_mdp_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "mdp_clk_src", + .parent_names = gcc_xo_gpll0_dsiphy, + .num_parents = 3, + .ops = &clk_rcg2_ops, + }, +}; + +static struct freq_tbl ftbl_gcc_mdss_pclk[] = { + { .src = P_DSI0_PHYPLL_DSI }, + { } +}; + +static struct clk_rcg2 pclk0_clk_src = { + .cmd_rcgr = 0x4d000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_dsiphy_map, + .freq_tbl = ftbl_gcc_mdss_pclk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pclk0_clk_src", + .parent_names = gcc_xo_gpll0a_dsiphy, + .num_parents = 3, + .ops = &clk_pixel_ops, + .flags = CLK_SET_RATE_PARENT, + }, +}; + +static const struct freq_tbl ftbl_gcc_mdss_vsync_clk[] = { + F(19200000, P_XO, 1, 0, 0), + { } +}; + +static struct clk_rcg2 vsync_clk_src = { + .cmd_rcgr = 0x4d02c, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_map, + .freq_tbl = ftbl_gcc_mdss_vsync_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "vsync_clk_src", + .parent_names = gcc_xo_gpll0a, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_pdm2_clk[] = { + F(64000000, P_GPLL0, 12.5, 0, 0), + { } +}; + +static struct clk_rcg2 pdm2_clk_src = { + .cmd_rcgr = 0x44010, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_pdm2_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pdm2_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc1_apps_clk[] = { + F(144000, P_XO, 16, 3, 25), + F(400000, P_XO, 12, 1, 4), + F(20000000, P_GPLL0, 10, 1, 4), + F(25000000, P_GPLL0, 16, 1, 2), + F(50000000, P_GPLL0, 16, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(177770000, P_GPLL0, 4.5, 0, 0), + { } +}; + +static struct clk_rcg2 sdcc1_apps_clk_src = { + .cmd_rcgr = 0x42004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_sdcc1_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc1_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_sdcc2_apps_clk[] = { + F(144000, P_XO, 16, 3, 25), + F(400000, P_XO, 12, 1, 4), + F(20000000, P_GPLL0, 10, 1, 4), + F(25000000, P_GPLL0, 16, 1, 2), + F(50000000, P_GPLL0, 16, 0, 0), + F(100000000, P_GPLL0, 8, 0, 0), + F(200000000, P_GPLL0, 4, 0, 0), + { } +}; + +static struct clk_rcg2 sdcc2_apps_clk_src = { + .cmd_rcgr = 0x43004, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_sdcc2_apps_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "sdcc2_apps_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_apss_tcu_clk[] = { + F(155000000, P_GPLL2, 6, 0, 0), + F(310000000, P_GPLL2, 3, 0, 0), + F(400000000, P_GPLL0, 2, 0, 0), + { } +}; + +static struct clk_rcg2 apss_tcu_clk_src = { + .cmd_rcgr = 0x1207c, + .hid_width = 5, + .parent_map = gcc_xo_gpll0a_gpll1_gpll2_map, + .freq_tbl = ftbl_gcc_apss_tcu_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "apss_tcu_clk_src", + .parent_names = gcc_xo_gpll0a_gpll1_gpll2, + .num_parents = 4, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_usb_hs_system_clk[] = { + F(80000000, P_GPLL0, 10, 0, 0), + { } +}; + +static struct clk_rcg2 usb_hs_system_clk_src = { + .cmd_rcgr = 0x41010, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_usb_hs_system_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "usb_hs_system_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static const struct freq_tbl ftbl_gcc_venus0_vcodec0_clk[] = { + F(100000000, P_GPLL0, 8, 0, 0), + F(160000000, P_GPLL0, 5, 0, 0), + F(228570000, P_GPLL0, 5, 0, 0), + { } +}; + +static struct clk_rcg2 vcodec0_clk_src = { + .cmd_rcgr = 0x4C000, + .mnd_width = 8, + .hid_width = 5, + .parent_map = gcc_xo_gpll0_map, + .freq_tbl = ftbl_gcc_venus0_vcodec0_clk, + .clkr.hw.init = &(struct clk_init_data){ + .name = "vcodec0_clk_src", + .parent_names = gcc_xo_gpll0, + .num_parents = 2, + .ops = &clk_rcg2_ops, + }, +}; + +static struct clk_branch gcc_blsp1_ahb_clk = { + .halt_reg = 0x01008, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_sleep_clk = { + .halt_reg = 0x01004, + .clkr = { + .enable_reg = 0x01004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_sleep_clk", + .parent_names = (const char *[]){ + "sleep_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup1_i2c_apps_clk = { + .halt_reg = 0x02008, + .clkr = { + .enable_reg = 0x02008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup1_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup1_spi_apps_clk = { + .halt_reg = 0x02004, + .clkr = { + .enable_reg = 0x02004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup1_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup1_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup2_i2c_apps_clk = { + .halt_reg = 0x03010, + .clkr = { + .enable_reg = 0x03010, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup2_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup2_spi_apps_clk = { + .halt_reg = 0x0300c, + .clkr = { + .enable_reg = 0x0300c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup2_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup2_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup3_i2c_apps_clk = { + .halt_reg = 0x04020, + .clkr = { + .enable_reg = 0x04020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup3_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup3_spi_apps_clk = { + .halt_reg = 0x0401c, + .clkr = { + .enable_reg = 0x0401c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup3_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup3_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup4_i2c_apps_clk = { + .halt_reg = 0x05020, + .clkr = { + .enable_reg = 0x05020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup4_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup4_spi_apps_clk = { + .halt_reg = 0x0501c, + .clkr = { + .enable_reg = 0x0501c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup4_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup4_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup5_i2c_apps_clk = { + .halt_reg = 0x06020, + .clkr = { + .enable_reg = 0x06020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup5_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup5_spi_apps_clk = { + .halt_reg = 0x0601c, + .clkr = { + .enable_reg = 0x0601c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup5_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup5_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup6_i2c_apps_clk = { + .halt_reg = 0x07020, + .clkr = { + .enable_reg = 0x07020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_i2c_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup6_i2c_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = { + .halt_reg = 0x0701c, + .clkr = { + .enable_reg = 0x0701c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_qup6_spi_apps_clk", + .parent_names = (const char *[]){ + "blsp1_qup6_spi_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_uart1_apps_clk = { + .halt_reg = 0x0203c, + .clkr = { + .enable_reg = 0x0203c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart1_apps_clk", + .parent_names = (const char *[]){ + "blsp1_uart1_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_blsp1_uart2_apps_clk = { + .halt_reg = 0x0302c, + .clkr = { + .enable_reg = 0x0302c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_blsp1_uart2_apps_clk", + .parent_names = (const char *[]){ + "blsp1_uart2_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_boot_rom_ahb_clk = { + .halt_reg = 0x1300c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(7), + .hw.init = &(struct clk_init_data){ + .name = "gcc_boot_rom_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_cci_ahb_clk = { + .halt_reg = 0x5101c, + .clkr = { + .enable_reg = 0x5101c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_cci_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_cci_clk = { + .halt_reg = 0x51018, + .clkr = { + .enable_reg = 0x51018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_cci_clk", + .parent_names = (const char *[]){ + "cci_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0_ahb_clk = { + .halt_reg = 0x4e040, + .clkr = { + .enable_reg = 0x4e040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0_clk = { + .halt_reg = 0x4e03c, + .clkr = { + .enable_reg = 0x4e03c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0_clk", + .parent_names = (const char *[]){ + "csi0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0phy_clk = { + .halt_reg = 0x4e048, + .clkr = { + .enable_reg = 0x4e048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0phy_clk", + .parent_names = (const char *[]){ + "csi0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0pix_clk = { + .halt_reg = 0x4e058, + .clkr = { + .enable_reg = 0x4e058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0pix_clk", + .parent_names = (const char *[]){ + "csi0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0rdi_clk = { + .halt_reg = 0x4e050, + .clkr = { + .enable_reg = 0x4e050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0rdi_clk", + .parent_names = (const char *[]){ + "csi0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1_ahb_clk = { + .halt_reg = 0x4f040, + .clkr = { + .enable_reg = 0x4f040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1_clk = { + .halt_reg = 0x4f03c, + .clkr = { + .enable_reg = 0x4f03c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1_clk", + .parent_names = (const char *[]){ + "csi1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1phy_clk = { + .halt_reg = 0x4f048, + .clkr = { + .enable_reg = 0x4f048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1phy_clk", + .parent_names = (const char *[]){ + "csi1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1pix_clk = { + .halt_reg = 0x4f058, + .clkr = { + .enable_reg = 0x4f058, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1pix_clk", + .parent_names = (const char *[]){ + "csi1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1rdi_clk = { + .halt_reg = 0x4f050, + .clkr = { + .enable_reg = 0x4f050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1rdi_clk", + .parent_names = (const char *[]){ + "csi1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi_vfe0_clk = { + .halt_reg = 0x58050, + .clkr = { + .enable_reg = 0x58050, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi_vfe0_clk", + .parent_names = (const char *[]){ + "vfe0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_gp0_clk = { + .halt_reg = 0x54018, + .clkr = { + .enable_reg = 0x54018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_gp0_clk", + .parent_names = (const char *[]){ + "camss_gp0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_gp1_clk = { + .halt_reg = 0x55018, + .clkr = { + .enable_reg = 0x55018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_gp1_clk", + .parent_names = (const char *[]){ + "camss_gp1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_ispif_ahb_clk = { + .halt_reg = 0x50004, + .clkr = { + .enable_reg = 0x50004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_ispif_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_jpeg0_clk = { + .halt_reg = 0x57020, + .clkr = { + .enable_reg = 0x57020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_jpeg0_clk", + .parent_names = (const char *[]){ + "jpeg0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_jpeg_ahb_clk = { + .halt_reg = 0x57024, + .clkr = { + .enable_reg = 0x57024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_jpeg_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_jpeg_axi_clk = { + .halt_reg = 0x57028, + .clkr = { + .enable_reg = 0x57028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_jpeg_axi_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_mclk0_clk = { + .halt_reg = 0x52018, + .clkr = { + .enable_reg = 0x52018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_mclk0_clk", + .parent_names = (const char *[]){ + "mclk0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_mclk1_clk = { + .halt_reg = 0x53018, + .clkr = { + .enable_reg = 0x53018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_mclk1_clk", + .parent_names = (const char *[]){ + "mclk1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_micro_ahb_clk = { + .halt_reg = 0x5600c, + .clkr = { + .enable_reg = 0x5600c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_micro_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi0phytimer_clk = { + .halt_reg = 0x4e01c, + .clkr = { + .enable_reg = 0x4e01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi0phytimer_clk", + .parent_names = (const char *[]){ + "csi0phytimer_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_csi1phytimer_clk = { + .halt_reg = 0x4f01c, + .clkr = { + .enable_reg = 0x4f01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_csi1phytimer_clk", + .parent_names = (const char *[]){ + "csi1phytimer_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_ahb_clk = { + .halt_reg = 0x5a014, + .clkr = { + .enable_reg = 0x5a014, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_top_ahb_clk = { + .halt_reg = 0x56004, + .clkr = { + .enable_reg = 0x56004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_top_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_cpp_ahb_clk = { + .halt_reg = 0x58040, + .clkr = { + .enable_reg = 0x58040, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_cpp_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_cpp_clk = { + .halt_reg = 0x5803c, + .clkr = { + .enable_reg = 0x5803c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_cpp_clk", + .parent_names = (const char *[]){ + "cpp_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_vfe0_clk = { + .halt_reg = 0x58038, + .clkr = { + .enable_reg = 0x58038, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_vfe0_clk", + .parent_names = (const char *[]){ + "vfe0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_vfe_ahb_clk = { + .halt_reg = 0x58044, + .clkr = { + .enable_reg = 0x58044, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_vfe_ahb_clk", + .parent_names = (const char *[]){ + "camss_ahb_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_camss_vfe_axi_clk = { + .halt_reg = 0x58048, + .clkr = { + .enable_reg = 0x58048, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_camss_vfe_axi_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_ahb_clk = { + .halt_reg = 0x16024, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_axi_clk = { + .halt_reg = 0x16020, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(1), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_axi_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_crypto_clk = { + .halt_reg = 0x1601c, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(2), + .hw.init = &(struct clk_init_data){ + .name = "gcc_crypto_clk", + .parent_names = (const char *[]){ + "crypto_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_oxili_gmem_clk = { + .halt_reg = 0x59024, + .clkr = { + .enable_reg = 0x59024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_oxili_gmem_clk", + .parent_names = (const char *[]){ + "gfx3d_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp1_clk = { + .halt_reg = 0x08000, + .clkr = { + .enable_reg = 0x08000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp1_clk", + .parent_names = (const char *[]){ + "gp1_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp2_clk = { + .halt_reg = 0x09000, + .clkr = { + .enable_reg = 0x09000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp2_clk", + .parent_names = (const char *[]){ + "gp2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gp3_clk = { + .halt_reg = 0x0a000, + .clkr = { + .enable_reg = 0x0a000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gp3_clk", + .parent_names = (const char *[]){ + "gp3_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_ahb_clk = { + .halt_reg = 0x4d07c, + .clkr = { + .enable_reg = 0x4d07c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_axi_clk = { + .halt_reg = 0x4d080, + .clkr = { + .enable_reg = 0x4d080, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_axi_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_byte0_clk = { + .halt_reg = 0x4d094, + .clkr = { + .enable_reg = 0x4d094, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_byte0_clk", + .parent_names = (const char *[]){ + "byte0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_esc0_clk = { + .halt_reg = 0x4d098, + .clkr = { + .enable_reg = 0x4d098, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_esc0_clk", + .parent_names = (const char *[]){ + "esc0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_mdp_clk = { + .halt_reg = 0x4D088, + .clkr = { + .enable_reg = 0x4D088, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_mdp_clk", + .parent_names = (const char *[]){ + "mdp_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_pclk0_clk = { + .halt_reg = 0x4d084, + .clkr = { + .enable_reg = 0x4d084, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_pclk0_clk", + .parent_names = (const char *[]){ + "pclk0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdss_vsync_clk = { + .halt_reg = 0x4d090, + .clkr = { + .enable_reg = 0x4d090, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdss_vsync_clk", + .parent_names = (const char *[]){ + "vsync_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mss_cfg_ahb_clk = { + .halt_reg = 0x49000, + .clkr = { + .enable_reg = 0x49000, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mss_cfg_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_oxili_ahb_clk = { + .halt_reg = 0x59028, + .clkr = { + .enable_reg = 0x59028, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_oxili_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_oxili_gfx3d_clk = { + .halt_reg = 0x59020, + .clkr = { + .enable_reg = 0x59020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_oxili_gfx3d_clk", + .parent_names = (const char *[]){ + "gfx3d_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm2_clk = { + .halt_reg = 0x4400c, + .clkr = { + .enable_reg = 0x4400c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm2_clk", + .parent_names = (const char *[]){ + "pdm2_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_pdm_ahb_clk = { + .halt_reg = 0x44004, + .clkr = { + .enable_reg = 0x44004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_pdm_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_prng_ahb_clk = { + .halt_reg = 0x13004, + .halt_check = BRANCH_HALT_VOTED, + .clkr = { + .enable_reg = 0x45004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_prng_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc1_ahb_clk = { + .halt_reg = 0x4201c, + .clkr = { + .enable_reg = 0x4201c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc1_apps_clk = { + .halt_reg = 0x42018, + .clkr = { + .enable_reg = 0x42018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc1_apps_clk", + .parent_names = (const char *[]){ + "sdcc1_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_ahb_clk = { + .halt_reg = 0x4301c, + .clkr = { + .enable_reg = 0x4301c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_sdcc2_apps_clk = { + .halt_reg = 0x43018, + .clkr = { + .enable_reg = 0x43018, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_sdcc2_apps_clk", + .parent_names = (const char *[]){ + "sdcc2_apps_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_gtcu_ahb_clk = { + .halt_reg = 0x12044, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(13), + .hw.init = &(struct clk_init_data){ + .name = "gcc_gtcu_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_jpeg_tbu_clk = { + .halt_reg = 0x12034, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(10), + .hw.init = &(struct clk_init_data){ + .name = "gcc_jpeg_tbu_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_mdp_tbu_clk = { + .halt_reg = 0x1201c, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(4), + .hw.init = &(struct clk_init_data){ + .name = "gcc_mdp_tbu_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_smmu_cfg_clk = { + .halt_reg = 0x12038, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(12), + .hw.init = &(struct clk_init_data){ + .name = "gcc_smmu_cfg_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_venus_tbu_clk = { + .halt_reg = 0x12014, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(5), + .hw.init = &(struct clk_init_data){ + .name = "gcc_venus_tbu_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_vfe_tbu_clk = { + .halt_reg = 0x1203c, + .clkr = { + .enable_reg = 0x4500c, + .enable_mask = BIT(9), + .hw.init = &(struct clk_init_data){ + .name = "gcc_vfe_tbu_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb2a_phy_sleep_clk = { + .halt_reg = 0x4102c, + .clkr = { + .enable_reg = 0x4102c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb2a_phy_sleep_clk", + .parent_names = (const char *[]){ + "sleep_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb_hs_ahb_clk = { + .halt_reg = 0x41008, + .clkr = { + .enable_reg = 0x41008, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb_hs_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_usb_hs_system_clk = { + .halt_reg = 0x41004, + .clkr = { + .enable_reg = 0x41004, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_usb_hs_system_clk", + .parent_names = (const char *[]){ + "usb_hs_system_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_venus0_ahb_clk = { + .halt_reg = 0x4c020, + .clkr = { + .enable_reg = 0x4c020, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_venus0_ahb_clk", + .parent_names = (const char *[]){ + "pcnoc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_venus0_axi_clk = { + .halt_reg = 0x4c024, + .clkr = { + .enable_reg = 0x4c024, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_venus0_axi_clk", + .parent_names = (const char *[]){ + "system_noc_bfdcd_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch gcc_venus0_vcodec0_clk = { + .halt_reg = 0x4c01c, + .clkr = { + .enable_reg = 0x4c01c, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "gcc_venus0_vcodec0_clk", + .parent_names = (const char *[]){ + "vcodec0_clk_src", + }, + .num_parents = 1, + .flags = CLK_SET_RATE_PARENT, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct gdsc venus_gdsc = { + .gdscr = 0x4c018, + .pd = { + .name = "venus", + }, +}; + +static struct gdsc mdss_gdsc = { + .gdscr = 0x4d078, + .pd = { + .name = "mdss", + }, +}; + +static struct gdsc jpeg_gdsc = { + .gdscr = 0x5701c, + .pd = { + .name = "jpeg", + }, +}; + +static struct gdsc vfe_gdsc = { + .gdscr = 0x58034, + .pd = { + .name = "vfe", + }, +}; + +static struct clk_regmap *gcc_msm8916_clocks[] = { + [GPLL0] = &gpll0.clkr, + [GPLL0_VOTE] = &gpll0_vote, + [BIMC_PLL] = &bimc_pll.clkr, + [BIMC_PLL_VOTE] = &bimc_pll_vote, + [GPLL1] = &gpll1.clkr, + [GPLL1_VOTE] = &gpll1_vote, + [GPLL2] = &gpll2.clkr, + [GPLL2_VOTE] = &gpll2_vote, + [PCNOC_BFDCD_CLK_SRC] = &pcnoc_bfdcd_clk_src.clkr, + [SYSTEM_NOC_BFDCD_CLK_SRC] = &system_noc_bfdcd_clk_src.clkr, + [CAMSS_AHB_CLK_SRC] = &camss_ahb_clk_src.clkr, + [APSS_AHB_CLK_SRC] = &apss_ahb_clk_src.clkr, + [CSI0_CLK_SRC] = &csi0_clk_src.clkr, + [CSI1_CLK_SRC] = &csi1_clk_src.clkr, + [GFX3D_CLK_SRC] = &gfx3d_clk_src.clkr, + [VFE0_CLK_SRC] = &vfe0_clk_src.clkr, + [BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr, + [BLSP1_QUP1_SPI_APPS_CLK_SRC] = &blsp1_qup1_spi_apps_clk_src.clkr, + [BLSP1_QUP2_I2C_APPS_CLK_SRC] = &blsp1_qup2_i2c_apps_clk_src.clkr, + [BLSP1_QUP2_SPI_APPS_CLK_SRC] = &blsp1_qup2_spi_apps_clk_src.clkr, + [BLSP1_QUP3_I2C_APPS_CLK_SRC] = &blsp1_qup3_i2c_apps_clk_src.clkr, + [BLSP1_QUP3_SPI_APPS_CLK_SRC] = &blsp1_qup3_spi_apps_clk_src.clkr, + [BLSP1_QUP4_I2C_APPS_CLK_SRC] = &blsp1_qup4_i2c_apps_clk_src.clkr, + [BLSP1_QUP4_SPI_APPS_CLK_SRC] = &blsp1_qup4_spi_apps_clk_src.clkr, + [BLSP1_QUP5_I2C_APPS_CLK_SRC] = &blsp1_qup5_i2c_apps_clk_src.clkr, + [BLSP1_QUP5_SPI_APPS_CLK_SRC] = &blsp1_qup5_spi_apps_clk_src.clkr, + [BLSP1_QUP6_I2C_APPS_CLK_SRC] = &blsp1_qup6_i2c_apps_clk_src.clkr, + [BLSP1_QUP6_SPI_APPS_CLK_SRC] = &blsp1_qup6_spi_apps_clk_src.clkr, + [BLSP1_UART1_APPS_CLK_SRC] = &blsp1_uart1_apps_clk_src.clkr, + [BLSP1_UART2_APPS_CLK_SRC] = &blsp1_uart2_apps_clk_src.clkr, + [CCI_CLK_SRC] = &cci_clk_src.clkr, + [CAMSS_GP0_CLK_SRC] = &camss_gp0_clk_src.clkr, + [CAMSS_GP1_CLK_SRC] = &camss_gp1_clk_src.clkr, + [JPEG0_CLK_SRC] = &jpeg0_clk_src.clkr, + [MCLK0_CLK_SRC] = &mclk0_clk_src.clkr, + [MCLK1_CLK_SRC] = &mclk1_clk_src.clkr, + [CSI0PHYTIMER_CLK_SRC] = &csi0phytimer_clk_src.clkr, + [CSI1PHYTIMER_CLK_SRC] = &csi1phytimer_clk_src.clkr, + [CPP_CLK_SRC] = &cpp_clk_src.clkr, + [CRYPTO_CLK_SRC] = &crypto_clk_src.clkr, + [GP1_CLK_SRC] = &gp1_clk_src.clkr, + [GP2_CLK_SRC] = &gp2_clk_src.clkr, + [GP3_CLK_SRC] = &gp3_clk_src.clkr, + [BYTE0_CLK_SRC] = &byte0_clk_src.clkr, + [ESC0_CLK_SRC] = &esc0_clk_src.clkr, + [MDP_CLK_SRC] = &mdp_clk_src.clkr, + [PCLK0_CLK_SRC] = &pclk0_clk_src.clkr, + [VSYNC_CLK_SRC] = &vsync_clk_src.clkr, + [PDM2_CLK_SRC] = &pdm2_clk_src.clkr, + [SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr, + [SDCC2_APPS_CLK_SRC] = &sdcc2_apps_clk_src.clkr, + [APSS_TCU_CLK_SRC] = &apss_tcu_clk_src.clkr, + [USB_HS_SYSTEM_CLK_SRC] = &usb_hs_system_clk_src.clkr, + [VCODEC0_CLK_SRC] = &vcodec0_clk_src.clkr, + [GCC_BLSP1_AHB_CLK] = &gcc_blsp1_ahb_clk.clkr, + [GCC_BLSP1_SLEEP_CLK] = &gcc_blsp1_sleep_clk.clkr, + [GCC_BLSP1_QUP1_I2C_APPS_CLK] = &gcc_blsp1_qup1_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP1_SPI_APPS_CLK] = &gcc_blsp1_qup1_spi_apps_clk.clkr, + [GCC_BLSP1_QUP2_I2C_APPS_CLK] = &gcc_blsp1_qup2_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP2_SPI_APPS_CLK] = &gcc_blsp1_qup2_spi_apps_clk.clkr, + [GCC_BLSP1_QUP3_I2C_APPS_CLK] = &gcc_blsp1_qup3_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP3_SPI_APPS_CLK] = &gcc_blsp1_qup3_spi_apps_clk.clkr, + [GCC_BLSP1_QUP4_I2C_APPS_CLK] = &gcc_blsp1_qup4_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr, + [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr, + [GCC_BLSP1_QUP6_I2C_APPS_CLK] = &gcc_blsp1_qup6_i2c_apps_clk.clkr, + [GCC_BLSP1_QUP6_SPI_APPS_CLK] = &gcc_blsp1_qup6_spi_apps_clk.clkr, + [GCC_BLSP1_UART1_APPS_CLK] = &gcc_blsp1_uart1_apps_clk.clkr, + [GCC_BLSP1_UART2_APPS_CLK] = &gcc_blsp1_uart2_apps_clk.clkr, + [GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr, + [GCC_CAMSS_CCI_AHB_CLK] = &gcc_camss_cci_ahb_clk.clkr, + [GCC_CAMSS_CCI_CLK] = &gcc_camss_cci_clk.clkr, + [GCC_CAMSS_CSI0_AHB_CLK] = &gcc_camss_csi0_ahb_clk.clkr, + [GCC_CAMSS_CSI0_CLK] = &gcc_camss_csi0_clk.clkr, + [GCC_CAMSS_CSI0PHY_CLK] = &gcc_camss_csi0phy_clk.clkr, + [GCC_CAMSS_CSI0PIX_CLK] = &gcc_camss_csi0pix_clk.clkr, + [GCC_CAMSS_CSI0RDI_CLK] = &gcc_camss_csi0rdi_clk.clkr, + [GCC_CAMSS_CSI1_AHB_CLK] = &gcc_camss_csi1_ahb_clk.clkr, + [GCC_CAMSS_CSI1_CLK] = &gcc_camss_csi1_clk.clkr, + [GCC_CAMSS_CSI1PHY_CLK] = &gcc_camss_csi1phy_clk.clkr, + [GCC_CAMSS_CSI1PIX_CLK] = &gcc_camss_csi1pix_clk.clkr, + [GCC_CAMSS_CSI1RDI_CLK] = &gcc_camss_csi1rdi_clk.clkr, + [GCC_CAMSS_CSI_VFE0_CLK] = &gcc_camss_csi_vfe0_clk.clkr, + [GCC_CAMSS_GP0_CLK] = &gcc_camss_gp0_clk.clkr, + [GCC_CAMSS_GP1_CLK] = &gcc_camss_gp1_clk.clkr, + [GCC_CAMSS_ISPIF_AHB_CLK] = &gcc_camss_ispif_ahb_clk.clkr, + [GCC_CAMSS_JPEG0_CLK] = &gcc_camss_jpeg0_clk.clkr, + [GCC_CAMSS_JPEG_AHB_CLK] = &gcc_camss_jpeg_ahb_clk.clkr, + [GCC_CAMSS_JPEG_AXI_CLK] = &gcc_camss_jpeg_axi_clk.clkr, + [GCC_CAMSS_MCLK0_CLK] = &gcc_camss_mclk0_clk.clkr, + [GCC_CAMSS_MCLK1_CLK] = &gcc_camss_mclk1_clk.clkr, + [GCC_CAMSS_MICRO_AHB_CLK] = &gcc_camss_micro_ahb_clk.clkr, + [GCC_CAMSS_CSI0PHYTIMER_CLK] = &gcc_camss_csi0phytimer_clk.clkr, + [GCC_CAMSS_CSI1PHYTIMER_CLK] = &gcc_camss_csi1phytimer_clk.clkr, + [GCC_CAMSS_AHB_CLK] = &gcc_camss_ahb_clk.clkr, + [GCC_CAMSS_TOP_AHB_CLK] = &gcc_camss_top_ahb_clk.clkr, + [GCC_CAMSS_CPP_AHB_CLK] = &gcc_camss_cpp_ahb_clk.clkr, + [GCC_CAMSS_CPP_CLK] = &gcc_camss_cpp_clk.clkr, + [GCC_CAMSS_VFE0_CLK] = &gcc_camss_vfe0_clk.clkr, + [GCC_CAMSS_VFE_AHB_CLK] = &gcc_camss_vfe_ahb_clk.clkr, + [GCC_CAMSS_VFE_AXI_CLK] = &gcc_camss_vfe_axi_clk.clkr, + [GCC_CRYPTO_AHB_CLK] = &gcc_crypto_ahb_clk.clkr, + [GCC_CRYPTO_AXI_CLK] = &gcc_crypto_axi_clk.clkr, + [GCC_CRYPTO_CLK] = &gcc_crypto_clk.clkr, + [GCC_OXILI_GMEM_CLK] = &gcc_oxili_gmem_clk.clkr, + [GCC_GP1_CLK] = &gcc_gp1_clk.clkr, + [GCC_GP2_CLK] = &gcc_gp2_clk.clkr, + [GCC_GP3_CLK] = &gcc_gp3_clk.clkr, + [GCC_MDSS_AHB_CLK] = &gcc_mdss_ahb_clk.clkr, + [GCC_MDSS_AXI_CLK] = &gcc_mdss_axi_clk.clkr, + [GCC_MDSS_BYTE0_CLK] = &gcc_mdss_byte0_clk.clkr, + [GCC_MDSS_ESC0_CLK] = &gcc_mdss_esc0_clk.clkr, + [GCC_MDSS_MDP_CLK] = &gcc_mdss_mdp_clk.clkr, + [GCC_MDSS_PCLK0_CLK] = &gcc_mdss_pclk0_clk.clkr, + [GCC_MDSS_VSYNC_CLK] = &gcc_mdss_vsync_clk.clkr, + [GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr, + [GCC_OXILI_AHB_CLK] = &gcc_oxili_ahb_clk.clkr, + [GCC_OXILI_GFX3D_CLK] = &gcc_oxili_gfx3d_clk.clkr, + [GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr, + [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr, + [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, + [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr, + [GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr, + [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr, + [GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr, + [GCC_GTCU_AHB_CLK] = &gcc_gtcu_ahb_clk.clkr, + [GCC_JPEG_TBU_CLK] = &gcc_jpeg_tbu_clk.clkr, + [GCC_MDP_TBU_CLK] = &gcc_mdp_tbu_clk.clkr, + [GCC_SMMU_CFG_CLK] = &gcc_smmu_cfg_clk.clkr, + [GCC_VENUS_TBU_CLK] = &gcc_venus_tbu_clk.clkr, + [GCC_VFE_TBU_CLK] = &gcc_vfe_tbu_clk.clkr, + [GCC_USB2A_PHY_SLEEP_CLK] = &gcc_usb2a_phy_sleep_clk.clkr, + [GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr, + [GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr, + [GCC_VENUS0_AHB_CLK] = &gcc_venus0_ahb_clk.clkr, + [GCC_VENUS0_AXI_CLK] = &gcc_venus0_axi_clk.clkr, + [GCC_VENUS0_VCODEC0_CLK] = &gcc_venus0_vcodec0_clk.clkr, +}; + +static struct gdsc *gcc_msm8916_gdscs[] = { + [VENUS_GDSC] = &venus_gdsc, + [MDSS_GDSC] = &mdss_gdsc, + [JPEG_GDSC] = &jpeg_gdsc, + [VFE_GDSC] = &vfe_gdsc, +}; + +static const struct qcom_reset_map gcc_msm8916_resets[] = { + [GCC_BLSP1_BCR] = { 0x01000 }, + [GCC_BLSP1_QUP1_BCR] = { 0x02000 }, + [GCC_BLSP1_UART1_BCR] = { 0x02038 }, + [GCC_BLSP1_QUP2_BCR] = { 0x03008 }, + [GCC_BLSP1_UART2_BCR] = { 0x03028 }, + [GCC_BLSP1_QUP3_BCR] = { 0x04018 }, + [GCC_BLSP1_QUP4_BCR] = { 0x05018 }, + [GCC_BLSP1_QUP5_BCR] = { 0x06018 }, + [GCC_BLSP1_QUP6_BCR] = { 0x07018 }, + [GCC_IMEM_BCR] = { 0x0e000 }, + [GCC_SMMU_BCR] = { 0x12000 }, + [GCC_APSS_TCU_BCR] = { 0x12050 }, + [GCC_SMMU_XPU_BCR] = { 0x12054 }, + [GCC_PCNOC_TBU_BCR] = { 0x12058 }, + [GCC_PRNG_BCR] = { 0x13000 }, + [GCC_BOOT_ROM_BCR] = { 0x13008 }, + [GCC_CRYPTO_BCR] = { 0x16000 }, + [GCC_SEC_CTRL_BCR] = { 0x1a000 }, + [GCC_AUDIO_CORE_BCR] = { 0x1c008 }, + [GCC_ULT_AUDIO_BCR] = { 0x1c0b4 }, + [GCC_DEHR_BCR] = { 0x1f000 }, + [GCC_SYSTEM_NOC_BCR] = { 0x26000 }, + [GCC_PCNOC_BCR] = { 0x27018 }, + [GCC_TCSR_BCR] = { 0x28000 }, + [GCC_QDSS_BCR] = { 0x29000 }, + [GCC_DCD_BCR] = { 0x2a000 }, + [GCC_MSG_RAM_BCR] = { 0x2b000 }, + [GCC_MPM_BCR] = { 0x2c000 }, + [GCC_SPMI_BCR] = { 0x2e000 }, + [GCC_SPDM_BCR] = { 0x2f000 }, + [GCC_MM_SPDM_BCR] = { 0x2f024 }, + [GCC_BIMC_BCR] = { 0x31000 }, + [GCC_RBCPR_BCR] = { 0x33000 }, + [GCC_TLMM_BCR] = { 0x34000 }, + [GCC_USB_HS_BCR] = { 0x41000 }, + [GCC_USB2A_PHY_BCR] = { 0x41028 }, + [GCC_SDCC1_BCR] = { 0x42000 }, + [GCC_SDCC2_BCR] = { 0x43000 }, + [GCC_PDM_BCR] = { 0x44000 }, + [GCC_SNOC_BUS_TIMEOUT0_BCR] = { 0x47000 }, + [GCC_PCNOC_BUS_TIMEOUT0_BCR] = { 0x48000 }, + [GCC_PCNOC_BUS_TIMEOUT1_BCR] = { 0x48008 }, + [GCC_PCNOC_BUS_TIMEOUT2_BCR] = { 0x48010 }, + [GCC_PCNOC_BUS_TIMEOUT3_BCR] = { 0x48018 }, + [GCC_PCNOC_BUS_TIMEOUT4_BCR] = { 0x48020 }, + [GCC_PCNOC_BUS_TIMEOUT5_BCR] = { 0x48028 }, + [GCC_PCNOC_BUS_TIMEOUT6_BCR] = { 0x48030 }, + [GCC_PCNOC_BUS_TIMEOUT7_BCR] = { 0x48038 }, + [GCC_PCNOC_BUS_TIMEOUT8_BCR] = { 0x48040 }, + [GCC_PCNOC_BUS_TIMEOUT9_BCR] = { 0x48048 }, + [GCC_MMSS_BCR] = { 0x4b000 }, + [GCC_VENUS0_BCR] = { 0x4c014 }, + [GCC_MDSS_BCR] = { 0x4d074 }, + [GCC_CAMSS_PHY0_BCR] = { 0x4e018 }, + [GCC_CAMSS_CSI0_BCR] = { 0x4e038 }, + [GCC_CAMSS_CSI0PHY_BCR] = { 0x4e044 }, + [GCC_CAMSS_CSI0RDI_BCR] = { 0x4e04c }, + [GCC_CAMSS_CSI0PIX_BCR] = { 0x4e054 }, + [GCC_CAMSS_PHY1_BCR] = { 0x4f018 }, + [GCC_CAMSS_CSI1_BCR] = { 0x4f038 }, + [GCC_CAMSS_CSI1PHY_BCR] = { 0x4f044 }, + [GCC_CAMSS_CSI1RDI_BCR] = { 0x4f04c }, + [GCC_CAMSS_CSI1PIX_BCR] = { 0x4f054 }, + [GCC_CAMSS_ISPIF_BCR] = { 0x50000 }, + [GCC_CAMSS_CCI_BCR] = { 0x51014 }, + [GCC_CAMSS_MCLK0_BCR] = { 0x52014 }, + [GCC_CAMSS_MCLK1_BCR] = { 0x53014 }, + [GCC_CAMSS_GP0_BCR] = { 0x54014 }, + [GCC_CAMSS_GP1_BCR] = { 0x55014 }, + [GCC_CAMSS_TOP_BCR] = { 0x56000 }, + [GCC_CAMSS_MICRO_BCR] = { 0x56008 }, + [GCC_CAMSS_JPEG_BCR] = { 0x57018 }, + [GCC_CAMSS_VFE_BCR] = { 0x58030 }, + [GCC_CAMSS_CSI_VFE0_BCR] = { 0x5804c }, + [GCC_OXILI_BCR] = { 0x59018 }, + [GCC_GMEM_BCR] = { 0x5902c }, + [GCC_CAMSS_AHB_BCR] = { 0x5a018 }, + [GCC_MDP_TBU_BCR] = { 0x62000 }, + [GCC_GFX_TBU_BCR] = { 0x63000 }, + [GCC_GFX_TCU_BCR] = { 0x64000 }, + [GCC_MSS_TBU_AXI_BCR] = { 0x65000 }, + [GCC_MSS_TBU_GSS_AXI_BCR] = { 0x66000 }, + [GCC_MSS_TBU_Q6_AXI_BCR] = { 0x67000 }, + [GCC_GTCU_AHB_BCR] = { 0x68000 }, + [GCC_SMMU_CFG_BCR] = { 0x69000 }, + [GCC_VFE_TBU_BCR] = { 0x6a000 }, + [GCC_VENUS_TBU_BCR] = { 0x6b000 }, + [GCC_JPEG_TBU_BCR] = { 0x6c000 }, + [GCC_PRONTO_TBU_BCR] = { 0x6d000 }, + [GCC_SMMU_CATS_BCR] = { 0x7c000 }, +}; + +static const struct regmap_config gcc_msm8916_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x80000, + .fast_io = true, +}; + +static const struct qcom_cc_desc gcc_msm8916_desc = { + .config = &gcc_msm8916_regmap_config, + .clks = gcc_msm8916_clocks, + .num_clks = ARRAY_SIZE(gcc_msm8916_clocks), + .resets = gcc_msm8916_resets, + .num_resets = ARRAY_SIZE(gcc_msm8916_resets), + .gdscs = gcc_msm8916_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_msm8916_gdscs), +}; + +static const struct of_device_id gcc_msm8916_match_table[] = { + { .compatible = "qcom,gcc-msm8916" }, + { } +}; +MODULE_DEVICE_TABLE(of, gcc_msm8916_match_table); + +static int gcc_msm8916_probe(struct platform_device *pdev) +{ + struct clk *clk; + struct device *dev = &pdev->dev; + + /* Temporary until RPM clocks supported */ + clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL, + CLK_IS_ROOT, 32768); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + return qcom_cc_probe(pdev, &gcc_msm8916_desc); +} + +static int gcc_msm8916_remove(struct platform_device *pdev) +{ + qcom_cc_remove(pdev); + return 0; +} + +static struct platform_driver gcc_msm8916_driver = { + .probe = gcc_msm8916_probe, + .remove = gcc_msm8916_remove, + .driver = { + .name = "gcc-msm8916", + .of_match_table = gcc_msm8916_match_table, + }, +}; + +static int __init gcc_msm8916_init(void) +{ + return platform_driver_register(&gcc_msm8916_driver); +} +core_initcall(gcc_msm8916_init); + +static void __exit gcc_msm8916_exit(void) +{ + platform_driver_unregister(&gcc_msm8916_driver); +} +module_exit(gcc_msm8916_exit); + +MODULE_DESCRIPTION("Qualcomm GCC MSM8916 Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:gcc-msm8916"); diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index e60feffc10a1..bd5ab94f83f2 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/of_platform.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> @@ -30,6 +31,7 @@ #include "clk-pll.h" #include "clk-rcg.h" #include "clk-branch.h" +#include "clk-hfpll.h" #include "reset.h" static struct clk_pll pll3 = { @@ -86,6 +88,164 @@ static struct clk_regmap pll8_vote = { }, }; +static struct hfpll_data hfpll0_data = { + .mode_reg = 0x3200, + .l_reg = 0x3208, + .m_reg = 0x320c, + .n_reg = 0x3210, + .config_reg = 0x3204, + .status_reg = 0x321c, + .config_val = 0x7845c665, + .droop_reg = 0x3214, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll0 = { + .d = &hfpll0_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll0", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), +}; + +static struct hfpll_data hfpll1_8064_data = { + .mode_reg = 0x3240, + .l_reg = 0x3248, + .m_reg = 0x324c, + .n_reg = 0x3250, + .config_reg = 0x3244, + .status_reg = 0x325c, + .config_val = 0x7845c665, + .droop_reg = 0x3254, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct hfpll_data hfpll1_data = { + .mode_reg = 0x3300, + .l_reg = 0x3308, + .m_reg = 0x330c, + .n_reg = 0x3310, + .config_reg = 0x3304, + .status_reg = 0x331c, + .config_val = 0x7845c665, + .droop_reg = 0x3314, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll1 = { + .d = &hfpll1_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll1", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), +}; + +static struct hfpll_data hfpll2_data = { + .mode_reg = 0x3280, + .l_reg = 0x3288, + .m_reg = 0x328c, + .n_reg = 0x3290, + .config_reg = 0x3284, + .status_reg = 0x329c, + .config_val = 0x7845c665, + .droop_reg = 0x3294, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll2 = { + .d = &hfpll2_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll2", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll2.lock), +}; + +static struct hfpll_data hfpll3_data = { + .mode_reg = 0x32c0, + .l_reg = 0x32c8, + .m_reg = 0x32cc, + .n_reg = 0x32d0, + .config_reg = 0x32c4, + .status_reg = 0x32dc, + .config_val = 0x7845c665, + .droop_reg = 0x32d4, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll3 = { + .d = &hfpll3_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll3", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll3.lock), +}; + +static struct hfpll_data hfpll_l2_8064_data = { + .mode_reg = 0x3300, + .l_reg = 0x3308, + .m_reg = 0x330c, + .n_reg = 0x3310, + .config_reg = 0x3304, + .status_reg = 0x331c, + .config_val = 0x7845c665, + .droop_reg = 0x3314, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct hfpll_data hfpll_l2_data = { + .mode_reg = 0x3400, + .l_reg = 0x3408, + .m_reg = 0x340c, + .n_reg = 0x3410, + .config_reg = 0x3404, + .status_reg = 0x341c, + .config_val = 0x7845c665, + .droop_reg = 0x3414, + .droop_val = 0x0108c000, + .min_rate = 600000000UL, + .max_rate = 1800000000UL, +}; + +static struct clk_hfpll hfpll_l2 = { + .d = &hfpll_l2_data, + .clkr.hw.init = &(struct clk_init_data){ + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .name = "hfpll_l2", + .ops = &clk_ops_hfpll, + .flags = CLK_IGNORE_UNUSED, + }, + .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), +}; + static struct clk_pll pll14 = { .l_reg = 0x31c4, .m_reg = 0x31c8, @@ -113,14 +273,16 @@ static struct clk_regmap pll14_vote = { }, }; -#define P_PXO 0 -#define P_PLL8 1 -#define P_PLL3 2 -#define P_CXO 2 +enum { + P_PXO, + P_PLL8, + P_PLL3, + P_CXO, +}; -static const u8 gcc_pxo_pll8_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, +static const struct parent_map gcc_pxo_pll8_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 } }; static const char *gcc_pxo_pll8[] = { @@ -128,10 +290,10 @@ static const char *gcc_pxo_pll8[] = { "pll8_vote", }; -static const u8 gcc_pxo_pll8_cxo_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, - [P_CXO] = 5, +static const struct parent_map gcc_pxo_pll8_cxo_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 }, + { P_CXO, 5 } }; static const char *gcc_pxo_pll8_cxo[] = { @@ -140,10 +302,10 @@ static const char *gcc_pxo_pll8_cxo[] = { "cxo", }; -static const u8 gcc_pxo_pll8_pll3_map[] = { - [P_PXO] = 0, - [P_PLL8] = 3, - [P_PLL3] = 6, +static const struct parent_map gcc_pxo_pll8_pll3_map[] = { + { P_PXO, 0 }, + { P_PLL8, 3 }, + { P_PLL3, 6 } }; static const char *gcc_pxo_pll8_pll3[] = { @@ -3152,6 +3314,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = { [PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr, [PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr, [RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr, + [PLL9] = &hfpll0.clkr, + [PLL10] = &hfpll1.clkr, + [PLL12] = &hfpll_l2.clkr, }; static const struct qcom_reset_map gcc_msm8960_resets[] = { @@ -3363,6 +3528,11 @@ static struct clk_regmap *gcc_apq8064_clks[] = { [PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr, [PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr, [RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr, + [PLL9] = &hfpll0.clkr, + [PLL10] = &hfpll1.clkr, + [PLL12] = &hfpll_l2.clkr, + [PLL16] = &hfpll2.clkr, + [PLL17] = &hfpll3.clkr, }; static const struct qcom_reset_map gcc_apq8064_resets[] = { @@ -3501,24 +3671,19 @@ MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table); static int gcc_msm8960_probe(struct platform_device *pdev) { - struct clk *clk; - struct device *dev = &pdev->dev; const struct of_device_id *match; match = of_match_device(gcc_msm8960_match_table, &pdev->dev); if (!match) return -EINVAL; - /* Temporary until RPM clocks supported */ - clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000); - if (IS_ERR(clk)) - return PTR_ERR(clk); + if (match->data == &gcc_apq8064_desc) { + hfpll1.d = &hfpll1_8064_data; + hfpll_l2.d = &hfpll_l2_8064_data; + } - return qcom_cc_probe(pdev, match->data); + qcom_cc_probe(pdev, match->data); + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); } static int gcc_msm8960_remove(struct platform_device *pdev) diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c index a6937fe78d8a..125b41f9908a 100644 --- a/drivers/clk/qcom/gcc-msm8974.c +++ b/drivers/clk/qcom/gcc-msm8974.c @@ -31,15 +31,18 @@ #include "clk-rcg.h" #include "clk-branch.h" #include "reset.h" +#include "gdsc.h" -#define P_XO 0 -#define P_GPLL0 1 -#define P_GPLL1 1 -#define P_GPLL4 2 +enum { + P_XO, + P_GPLL0, + P_GPLL1, + P_GPLL4, +}; -static const u8 gcc_xo_gpll0_map[] = { - [P_XO] = 0, - [P_GPLL0] = 1, +static const struct parent_map gcc_xo_gpll0_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 } }; static const char *gcc_xo_gpll0[] = { @@ -47,10 +50,10 @@ static const char *gcc_xo_gpll0[] = { "gpll0_vote", }; -static const u8 gcc_xo_gpll0_gpll4_map[] = { - [P_XO] = 0, - [P_GPLL0] = 1, - [P_GPLL4] = 5, +static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { + { P_XO, 0 }, + { P_GPLL0, 1 }, + { P_GPLL4, 5 } }; static const char *gcc_xo_gpll0_gpll4[] = { @@ -984,9 +987,9 @@ static const struct freq_tbl ftbl_gcc_usb_hsic_clk[] = { { } }; -static u8 usb_hsic_clk_src_map[] = { - [P_XO] = 0, - [P_GPLL1] = 4, +static const struct parent_map usb_hsic_clk_src_map[] = { + { P_XO, 0 }, + { P_GPLL1, 4 } }; static struct clk_rcg2 usb_hsic_clk_src = { @@ -2429,6 +2432,13 @@ static struct clk_branch gcc_usb_hsic_system_clk = { }, }; +static struct gdsc usb_hs_hsic_gdsc = { + .gdscr = 0x404, + .pd = { + .name = "usb_hs_hsic", + }, +}; + static struct clk_regmap *gcc_msm8974_clocks[] = { [GPLL0] = &gpll0.clkr, [GPLL0_VOTE] = &gpll0_vote, @@ -2658,6 +2668,10 @@ static const struct qcom_reset_map gcc_msm8974_resets[] = { [GCC_VENUS_RESTART] = { 0x1740 }, }; +static struct gdsc *gcc_msm8974_gdscs[] = { + [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc, +}; + static const struct regmap_config gcc_msm8974_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -2672,6 +2686,8 @@ static const struct qcom_cc_desc gcc_msm8974_desc = { .num_clks = ARRAY_SIZE(gcc_msm8974_clocks), .resets = gcc_msm8974_resets, .num_resets = ARRAY_SIZE(gcc_msm8974_resets), + .gdscs = gcc_msm8974_gdscs, + .num_gdscs = ARRAY_SIZE(gcc_msm8974_gdscs), }; static const struct of_device_id gcc_msm8974_match_table[] = { diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c new file mode 100644 index 000000000000..7b8e5a05715d --- /dev/null +++ b/drivers/clk/qcom/gdsc.c @@ -0,0 +1,167 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/jiffies.h> +#include <linux/slab.h> +#include "gdsc.h" + +#define PWR_ON_MASK BIT(31) +#define EN_REST_WAIT_MASK GENMASK(23, 20) +#define EN_FEW_WAIT_MASK GENMASK(19, 16) +#define CLK_DIS_WAIT_MASK GENMASK(15, 12) +#define SW_OVERRIDE_MASK BIT(2) +#define HW_CONTROL_MASK BIT(1) +#define SW_COLLAPSE_MASK BIT(0) + +/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */ +#define EN_REST_WAIT_VAL (0x2 << 20) +#define EN_FEW_WAIT_VAL (0x8 << 16) +#define CLK_DIS_WAIT_VAL (0x2 << 12) + +#define TIMEOUT_US 100 + +#define domain_to_gdsc(domain) container_of(domain, struct gdsc, pd) + +static int gdsc_is_enabled(struct gdsc *sc) +{ + u32 val; + int ret; + + ret = regmap_read(sc->regmap, sc->gdscr, &val); + if (ret) + return ret; + + return !!(val & PWR_ON_MASK); +} + +static int gdsc_toggle_logic(struct gdsc *sc, bool en) +{ + int ret; + u32 val = en ? 0 : SW_COLLAPSE_MASK; + u32 check = en ? PWR_ON_MASK : 0; + unsigned long timeout; + + ret = regmap_update_bits(sc->regmap, sc->gdscr, SW_COLLAPSE_MASK, val); + if (ret) + return ret; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + ret = regmap_read(sc->regmap, sc->gdscr, &val); + if (ret) + return ret; + + if ((val & PWR_ON_MASK) == check) + return 0; + } while (time_before(jiffies, timeout)); + + ret = regmap_read(sc->regmap, sc->gdscr, &val); + if (ret) + return ret; + + if ((val & PWR_ON_MASK) == check) + return 0; + + return -ETIMEDOUT; +} + +static int gdsc_enable(struct generic_pm_domain *domain) +{ + struct gdsc *sc = domain_to_gdsc(domain); + int ret; + + ret = gdsc_toggle_logic(sc, true); + if (ret) + return ret; + /* + * If clocks to this power domain were already on, they will take an + * additional 4 clock cycles to re-enable after the power domain is + * enabled. Delay to account for this. A delay is also needed to ensure + * clocks are not enabled within 400ns of enabling power to the + * memories. + */ + udelay(1); + + return 0; +} + +static int gdsc_disable(struct generic_pm_domain *domain) +{ + struct gdsc *sc = domain_to_gdsc(domain); + + return gdsc_toggle_logic(sc, false); +} + +static int gdsc_init(struct gdsc *sc) +{ + u32 mask, val; + int on, ret; + + /* + * Disable HW trigger: collapse/restore occur based on registers writes. + * Disable SW override: Use hardware state-machine for sequencing. + * Configure wait time between states. + */ + mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK | + EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK; + val = EN_REST_WAIT_VAL | EN_FEW_WAIT_VAL | CLK_DIS_WAIT_VAL; + ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val); + if (ret) + return ret; + + on = gdsc_is_enabled(sc); + if (on < 0) + return on; + + pm_genpd_init(&sc->pd, NULL, !on); + sc->pd.power_off = gdsc_disable; + sc->pd.power_on = gdsc_enable; + + return 0; +} + +int gdsc_register(struct device *dev, struct gdsc **scs, size_t num, + struct regmap *regmap) +{ + int i, ret; + struct genpd_onecell_data *data; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->domains = devm_kcalloc(dev, num, sizeof(*data->domains), + GFP_KERNEL); + if (!data->domains) + return -ENOMEM; + + data->num_domains = num; + for (i = 0; i < num; i++) { + if (!scs[i]) + continue; + scs[i]->regmap = regmap; + ret = gdsc_init(scs[i]); + if (ret) + return ret; + data->domains[i] = &scs[i]->pd; + } + + return of_genpd_add_provider_onecell(dev->of_node, data); +} + +void gdsc_unregister(struct device *dev) +{ + of_genpd_del_provider(dev->of_node); +} diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h new file mode 100644 index 000000000000..e26a4960be2b --- /dev/null +++ b/drivers/clk/qcom/gdsc.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __QCOM_GDSC_H__ +#define __QCOM_GDSC_H__ + +#include <linux/pm_domain.h> +#include <linux/regmap.h> + +/** + * struct gdsc - Globally Distributed Switch Controller + * @pd: generic power domain + * @regmap: regmap for MMIO accesses + * @gdscr: gsdc control register + */ +struct gdsc { + struct generic_pm_domain pd; + struct regmap *regmap; + unsigned int gdscr; +}; + +#ifdef CONFIG_QCOM_GDSC +int gdsc_register(struct device *, struct gdsc **, size_t n, struct regmap *); +void gdsc_unregister(struct device *); +#else +static inline int gdsc_register(struct device *d, struct gdsc **g, size_t n, + struct regmap *r) +{ + return -ENOSYS; +} + +static inline void gdsc_unregister(struct device *d) +{}; +#endif /* CONFIG_QCOM_GDSC */ +#endif /* __QCOM_GDSC_H__ */ diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c new file mode 100644 index 000000000000..1492f4c79c35 --- /dev/null +++ b/drivers/clk/qcom/hfpll.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/regmap.h> + +#include "clk-regmap.h" +#include "clk-hfpll.h" + +static const struct hfpll_data hdata = { + .mode_reg = 0x00, + .l_reg = 0x04, + .m_reg = 0x08, + .n_reg = 0x0c, + .user_reg = 0x10, + .config_reg = 0x14, + .config_val = 0x430405d, + .status_reg = 0x1c, + .lock_bit = 16, + + .user_val = 0x8, + .user_vco_mask = 0x100000, + .low_vco_max_rate = 1248000000, + .min_rate = 537600000UL, + .max_rate = 2900000000UL, +}; + +static const struct of_device_id qcom_hfpll_match_table[] = { + { .compatible = "qcom,hfpll" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); + +static const struct regmap_config hfpll_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x30, + .fast_io = true, +}; + +static int qcom_hfpll_probe(struct platform_device *pdev) +{ + struct clk *clk; + struct resource *res; + struct device *dev = &pdev->dev; + void __iomem *base; + struct regmap *regmap; + struct clk_hfpll *h; + struct clk_init_data init = { + .parent_names = (const char *[]){ "xo" }, + .num_parents = 1, + .ops = &clk_ops_hfpll, + }; + + h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); + if (!h) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + if (of_property_read_string_index(dev->of_node, "clock-output-names", + 0, &init.name)) + return -ENODEV; + + h->d = &hdata; + h->clkr.hw.init = &init; + spin_lock_init(&h->lock); + + clk = devm_clk_register_regmap(&pdev->dev, &h->clkr); + + return PTR_ERR_OR_ZERO(clk); +} + +static struct platform_driver qcom_hfpll_driver = { + .probe = qcom_hfpll_probe, + .driver = { + .name = "qcom-hfpll", + .of_match_table = qcom_hfpll_match_table, + }, +}; +module_platform_driver(qcom_hfpll_driver); + +MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:qcom-hfpll"); diff --git a/drivers/clk/qcom/kpss-xcc.c b/drivers/clk/qcom/kpss-xcc.c new file mode 100644 index 000000000000..abf6bfd053c1 --- /dev/null +++ b/drivers/clk/qcom/kpss-xcc.c @@ -0,0 +1,95 @@ +/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> + +static const char *aux_parents[] = { + "pll8_vote", + "pxo", +}; + +static unsigned int aux_parent_map[] = { + 3, + 0, +}; + +static const struct of_device_id kpss_xcc_match_table[] = { + { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL }, + { .compatible = "qcom,kpss-gcc" }, + {} +}; +MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); + +static int kpss_xcc_driver_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + struct clk *clk; + struct resource *res; + void __iomem *base; + const char *name; + + id = of_match_device(kpss_xcc_match_table, &pdev->dev); + if (!id) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + if (id->data) { + if (of_property_read_string_index(pdev->dev.of_node, + "clock-output-names", 0, &name)) + return -ENODEV; + base += 0x14; + } else { + name = "acpu_l2_aux"; + base += 0x28; + } + + clk = clk_register_mux_table(&pdev->dev, name, aux_parents, + ARRAY_SIZE(aux_parents), 0, base, 0, 0x3, + 0, aux_parent_map, NULL); + + platform_set_drvdata(pdev, clk); + + return PTR_ERR_OR_ZERO(clk); +} + +static int kpss_xcc_driver_remove(struct platform_device *pdev) +{ + clk_unregister_mux(platform_get_drvdata(pdev)); + return 0; +} + +static struct platform_driver kpss_xcc_driver = { + .probe = kpss_xcc_driver_probe, + .remove = kpss_xcc_driver_remove, + .driver = { + .name = "kpss-xcc", + .of_match_table = kpss_xcc_match_table, + }, +}; +module_platform_driver(kpss_xcc_driver); + +MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:kpss-xcc"); diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c new file mode 100644 index 000000000000..f55b5ecd0df8 --- /dev/null +++ b/drivers/clk/qcom/krait-cc.c @@ -0,0 +1,352 @@ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> + +#include "clk-krait.h" + +static unsigned int sec_mux_map[] = { + 2, + 0, +}; + +static unsigned int pri_mux_map[] = { + 1, + 2, + 0, +}; + +static int +krait_add_div(struct device *dev, int id, const char *s, unsigned offset) +{ + struct krait_div2_clk *div; + struct clk_init_data init = { + .num_parents = 1, + .ops = &krait_div2_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + const char *p_names[1]; + struct clk *clk; + + div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); + if (!div) + return -ENOMEM; + + div->width = 2; + div->shift = 6; + div->lpl = id >= 0; + div->offset = offset; + div->hw.init = &init; + + init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); + if (!init.name) + return -ENOMEM; + + init.parent_names = p_names; + p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); + if (!p_names[0]) { + kfree(init.name); + return -ENOMEM; + } + + clk = devm_clk_register(dev, &div->hw); + kfree(p_names[0]); + kfree(init.name); + + return PTR_ERR_OR_ZERO(clk); +} + +static int +krait_add_sec_mux(struct device *dev, int id, const char *s, unsigned offset, + bool unique_aux) +{ + struct krait_mux_clk *mux; + static const char *sec_mux_list[] = { + "acpu_aux", + "qsb", + }; + struct clk_init_data init = { + .parent_names = sec_mux_list, + .num_parents = ARRAY_SIZE(sec_mux_list), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk *clk; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + mux->offset = offset; + mux->lpl = id >= 0; + mux->has_safe_parent = true; + mux->safe_sel = 2; + mux->mask = 0x3; + mux->shift = 2; + mux->parent_map = sec_mux_map; + mux->hw.init = &init; + + init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!init.name) + return -ENOMEM; + + if (unique_aux) { + sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); + if (!sec_mux_list[0]) { + clk = ERR_PTR(-ENOMEM); + goto err_aux; + } + } + + clk = devm_clk_register(dev, &mux->hw); + + if (unique_aux) + kfree(sec_mux_list[0]); +err_aux: + kfree(init.name); + return PTR_ERR_OR_ZERO(clk); +} + +static struct clk * +krait_add_pri_mux(struct device *dev, int id, const char *s, unsigned offset) +{ + struct krait_mux_clk *mux; + const char *p_names[3]; + struct clk_init_data init = { + .parent_names = p_names, + .num_parents = ARRAY_SIZE(p_names), + .ops = &krait_mux_clk_ops, + .flags = CLK_SET_RATE_PARENT, + }; + struct clk *clk; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return ERR_PTR(-ENOMEM); + + mux->has_safe_parent = true; + mux->safe_sel = 0; + mux->mask = 0x3; + mux->shift = 0; + mux->offset = offset; + mux->lpl = id >= 0; + mux->parent_map = pri_mux_map; + mux->hw.init = &init; + + init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); + if (!init.name) + return ERR_PTR(-ENOMEM); + + p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); + if (!p_names[0]) { + clk = ERR_PTR(-ENOMEM); + goto err_p0; + } + + p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); + if (!p_names[1]) { + clk = ERR_PTR(-ENOMEM); + goto err_p1; + } + + p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!p_names[2]) { + clk = ERR_PTR(-ENOMEM); + goto err_p2; + } + + clk = devm_clk_register(dev, &mux->hw); + + kfree(p_names[2]); +err_p2: + kfree(p_names[1]); +err_p1: + kfree(p_names[0]); +err_p0: + kfree(init.name); + return clk; +} + +/* id < 0 for L2, otherwise id == physical CPU number */ +static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) +{ + int ret; + unsigned offset; + void *p = NULL; + const char *s; + struct clk *clk; + + if (id >= 0) { + offset = 0x4501 + (0x1000 * id); + s = p = kasprintf(GFP_KERNEL, "%d", id); + if (!s) + return ERR_PTR(-ENOMEM); + } else { + offset = 0x500; + s = "_l2"; + } + + ret = krait_add_div(dev, id, s, offset); + if (ret) { + clk = ERR_PTR(ret); + goto err; + } + + ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); + if (ret) { + clk = ERR_PTR(ret); + goto err; + } + + clk = krait_add_pri_mux(dev, id, s, offset); +err: + kfree(p); + return clk; +} + +static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) +{ + unsigned int idx = clkspec->args[0]; + struct clk **clks = data; + + if (idx >= 5) { + pr_err("%s: invalid clock index %d\n", __func__, idx); + return ERR_PTR(-EINVAL); + } + + return clks[idx] ? : ERR_PTR(-ENODEV); +} + +static const struct of_device_id krait_cc_match_table[] = { + { .compatible = "qcom,krait-cc-v1", (void *)1UL }, + { .compatible = "qcom,krait-cc-v2" }, + {} +}; +MODULE_DEVICE_TABLE(of, krait_cc_match_table); + +static int krait_cc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *id; + unsigned long cur_rate, aux_rate; + int cpu; + struct clk *clk; + struct clk **clks; + struct clk *l2_pri_mux_clk; + + id = of_match_device(krait_cc_match_table, dev); + if (!id) + return -ENODEV; + + /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ + clk = clk_register_fixed_rate(dev, "qsb", NULL, CLK_IS_ROOT, 1); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + if (!id->data) { + clk = clk_register_fixed_factor(dev, "acpu_aux", + "gpll0_vote", 0, 1, 2); + if (IS_ERR(clk)) + return PTR_ERR(clk); + } + + /* Krait configurations have at most 4 CPUs and one L2 */ + clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); + if (!clks) + return -ENOMEM; + + for_each_possible_cpu(cpu) { + clk = krait_add_clks(dev, cpu, id->data); + if (IS_ERR(clk)) + return PTR_ERR(clk); + clks[cpu] = clk; + } + + l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); + if (IS_ERR(l2_pri_mux_clk)) + return PTR_ERR(l2_pri_mux_clk); + clks[4] = l2_pri_mux_clk; + + /* + * We don't want the CPU or L2 clocks to be turned off at late init + * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the + * refcount of these clocks. Any cpufreq/hotplug manager can assume + * that the clocks have already been prepared and enabled by the time + * they take over. + */ + for_each_online_cpu(cpu) { + clk_prepare_enable(l2_pri_mux_clk); + WARN(clk_prepare_enable(clks[cpu]), + "Unable to turn on CPU%d clock", cpu); + } + + /* + * Force reinit of HFPLLs and muxes to overwrite any potential + * incorrect configuration of HFPLLs and muxes by the bootloader. + * While at it, also make sure the cores are running at known rates + * and print the current rate. + * + * The clocks are set to aux clock rate first to make sure the + * secondary mux is not sourcing off of QSB. The rate is then set to + * two different rates to force a HFPLL reinit under all + * circumstances. + */ + cur_rate = clk_get_rate(l2_pri_mux_clk); + aux_rate = 384000000; + if (cur_rate == 1) { + pr_info("L2 @ QSB rate. Forcing new rate.\n"); + cur_rate = aux_rate; + } + clk_set_rate(l2_pri_mux_clk, aux_rate); + clk_set_rate(l2_pri_mux_clk, 2); + clk_set_rate(l2_pri_mux_clk, cur_rate); + pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); + for_each_possible_cpu(cpu) { + clk = clks[cpu]; + cur_rate = clk_get_rate(clk); + if (cur_rate == 1) { + pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); + cur_rate = aux_rate; + } + clk_set_rate(clk, aux_rate); + clk_set_rate(clk, 2); + clk_set_rate(clk, cur_rate); + pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); + } + + of_clk_add_provider(dev->of_node, krait_of_get, clks); + + return 0; +} + +static struct platform_driver krait_cc_driver = { + .probe = krait_cc_probe, + .driver = { + .name = "krait-cc", + .of_match_table = krait_cc_match_table, + }, +}; +module_platform_driver(krait_cc_driver); + +MODULE_DESCRIPTION("Krait CPU Clock Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:krait-cc"); diff --git a/drivers/clk/qcom/lcc-ipq806x.c b/drivers/clk/qcom/lcc-ipq806x.c index c9ff27b4648b..a1e7deff9fbe 100644 --- a/drivers/clk/qcom/lcc-ipq806x.c +++ b/drivers/clk/qcom/lcc-ipq806x.c @@ -61,12 +61,14 @@ static const struct pll_config pll4_config = { .main_output_mask = BIT(23), }; -#define P_PXO 0 -#define P_PLL4 1 +enum { + P_PXO, + P_PLL4, +}; -static const u8 lcc_pxo_pll4_map[] = { - [P_PXO] = 0, - [P_PLL4] = 2, +static const struct parent_map lcc_pxo_pll4_map[] = { + { P_PXO, 0 }, + { P_PLL4, 2 } }; static const char *lcc_pxo_pll4[] = { diff --git a/drivers/clk/qcom/lcc-msm8960.c b/drivers/clk/qcom/lcc-msm8960.c index e2c863295f00..d0df9d5fc3af 100644 --- a/drivers/clk/qcom/lcc-msm8960.c +++ b/drivers/clk/qcom/lcc-msm8960.c @@ -47,12 +47,14 @@ static struct clk_pll pll4 = { }, }; -#define P_PXO 0 -#define P_PLL4 1 +enum { + P_PXO, + P_PLL4, +}; -static const u8 lcc_pxo_pll4_map[] = { - [P_PXO] = 0, - [P_PLL4] = 2, +static const struct parent_map lcc_pxo_pll4_map[] = { + { P_PXO, 0 }, + { P_PLL4, 2 } }; static const char *lcc_pxo_pll4[] = { diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c index 157139a5c1ca..a4d742846ba4 100644 --- a/drivers/clk/qcom/mmcc-apq8084.c +++ b/drivers/clk/qcom/mmcc-apq8084.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -26,29 +26,32 @@ #include "clk-rcg.h" #include "clk-branch.h" #include "reset.h" - -#define P_XO 0 -#define P_MMPLL0 1 -#define P_EDPLINK 1 -#define P_MMPLL1 2 -#define P_HDMIPLL 2 -#define P_GPLL0 3 -#define P_EDPVCO 3 -#define P_MMPLL4 4 -#define P_DSI0PLL 4 -#define P_DSI0PLL_BYTE 4 -#define P_MMPLL2 4 -#define P_MMPLL3 4 -#define P_GPLL1 5 -#define P_DSI1PLL 5 -#define P_DSI1PLL_BYTE 5 -#define P_MMSLEEP 6 - -static const u8 mmcc_xo_mmpll0_mmpll1_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, +#include "gdsc.h" + +enum { + P_XO, + P_MMPLL0, + P_EDPLINK, + P_MMPLL1, + P_HDMIPLL, + P_GPLL0, + P_EDPVCO, + P_MMPLL4, + P_DSI0PLL, + P_DSI0PLL_BYTE, + P_MMPLL2, + P_MMPLL3, + P_GPLL1, + P_DSI1PLL, + P_DSI1PLL_BYTE, + P_MMSLEEP, +}; + +static const struct parent_map mmcc_xo_mmpll0_mmpll1_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 } }; static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = { @@ -58,13 +61,13 @@ static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = { "mmss_gpll0_vote", }; -static const u8 mmcc_xo_mmpll0_dsi_hdmi_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_HDMIPLL] = 4, - [P_GPLL0] = 5, - [P_DSI0PLL] = 2, - [P_DSI1PLL] = 3, +static const struct parent_map mmcc_xo_mmpll0_dsi_hdmi_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_HDMIPLL, 4 }, + { P_GPLL0, 5 }, + { P_DSI0PLL, 2 }, + { P_DSI1PLL, 3 } }; static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = { @@ -76,12 +79,12 @@ static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = { "dsi1pll", }; -static const u8 mmcc_xo_mmpll0_1_2_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_MMPLL2] = 3, +static const struct parent_map mmcc_xo_mmpll0_1_2_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_MMPLL2, 3 } }; static const char *mmcc_xo_mmpll0_1_2_gpll0[] = { @@ -92,12 +95,12 @@ static const char *mmcc_xo_mmpll0_1_2_gpll0[] = { "mmpll2", }; -static const u8 mmcc_xo_mmpll0_1_3_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_MMPLL3] = 3, +static const struct parent_map mmcc_xo_mmpll0_1_3_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_MMPLL3, 3 } }; static const char *mmcc_xo_mmpll0_1_3_gpll0[] = { @@ -108,13 +111,13 @@ static const char *mmcc_xo_mmpll0_1_3_gpll0[] = { "mmpll3", }; -static const u8 mmcc_xo_dsi_hdmi_edp_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_EDPVCO] = 5, - [P_DSI0PLL] = 1, - [P_DSI1PLL] = 2, +static const struct parent_map mmcc_xo_dsi_hdmi_edp_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_EDPVCO, 5 }, + { P_DSI0PLL, 1 }, + { P_DSI1PLL, 2 } }; static const char *mmcc_xo_dsi_hdmi_edp[] = { @@ -126,13 +129,13 @@ static const char *mmcc_xo_dsi_hdmi_edp[] = { "dsi1pll", }; -static const u8 mmcc_xo_dsi_hdmi_edp_gpll0_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_GPLL0] = 5, - [P_DSI0PLL] = 1, - [P_DSI1PLL] = 2, +static const struct parent_map mmcc_xo_dsi_hdmi_edp_gpll0_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_GPLL0, 5 }, + { P_DSI0PLL, 1 }, + { P_DSI1PLL, 2 } }; static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = { @@ -144,13 +147,13 @@ static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = { "dsi1pll", }; -static const u8 mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_GPLL0] = 5, - [P_DSI0PLL_BYTE] = 1, - [P_DSI1PLL_BYTE] = 2, +static const struct parent_map mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_GPLL0, 5 }, + { P_DSI0PLL_BYTE, 1 }, + { P_DSI1PLL_BYTE, 2 } }; static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = { @@ -162,12 +165,12 @@ static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = { "dsi1pllbyte", }; -static const u8 mmcc_xo_mmpll0_1_4_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_MMPLL4] = 3, +static const struct parent_map mmcc_xo_mmpll0_1_4_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_MMPLL4, 3 } }; static const char *mmcc_xo_mmpll0_1_4_gpll0[] = { @@ -178,13 +181,13 @@ static const char *mmcc_xo_mmpll0_1_4_gpll0[] = { "gpll0", }; -static const u8 mmcc_xo_mmpll0_1_4_gpll1_0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_MMPLL4] = 3, - [P_GPLL0] = 5, - [P_GPLL1] = 4, +static const struct parent_map mmcc_xo_mmpll0_1_4_gpll1_0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_MMPLL4, 3 }, + { P_GPLL0, 5 }, + { P_GPLL1, 4 } }; static const char *mmcc_xo_mmpll0_1_4_gpll1_0[] = { @@ -196,14 +199,14 @@ static const char *mmcc_xo_mmpll0_1_4_gpll1_0[] = { "gpll0", }; -static const u8 mmcc_xo_mmpll0_1_4_gpll1_0_sleep_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_MMPLL4] = 3, - [P_GPLL0] = 5, - [P_GPLL1] = 4, - [P_MMSLEEP] = 6, +static const struct parent_map mmcc_xo_mmpll0_1_4_gpll1_0_sleep_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_MMPLL4, 3 }, + { P_GPLL0, 5 }, + { P_GPLL1, 4 }, + { P_MMSLEEP, 6 } }; static const char *mmcc_xo_mmpll0_1_4_gpll1_0_sleep[] = { @@ -3075,6 +3078,48 @@ static const struct pll_config mmpll3_config = { .aux_output_mask = BIT(1), }; +static struct gdsc venus0_gdsc = { + .gdscr = 0x1024, + .pd = { + .name = "venus0", + }, +}; + +static struct gdsc mdss_gdsc = { + .gdscr = 0x2304, + .pd = { + .name = "mdss", + }, +}; + +static struct gdsc camss_jpeg_gdsc = { + .gdscr = 0x35a4, + .pd = { + .name = "camss_jpeg", + }, +}; + +static struct gdsc camss_vfe_gdsc = { + .gdscr = 0x36a4, + .pd = { + .name = "camss_vfe", + }, +}; + +static struct gdsc oxili_gdsc = { + .gdscr = 0x4024, + .pd = { + .name = "oxili", + }, +}; + +static struct gdsc oxilicx_gdsc = { + .gdscr = 0x4034, + .pd = { + .name = "oxilicx", + }, +}; + static struct clk_regmap *mmcc_apq8084_clocks[] = { [MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr, [MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr, @@ -3292,6 +3337,15 @@ static const struct qcom_reset_map mmcc_apq8084_resets[] = { [MMSSNOCAXI_RESET] = { 0x5060 }, }; +static struct gdsc *mmcc_apq8084_gdscs[] = { + [VENUS0_GDSC] = &venus0_gdsc, + [MDSS_GDSC] = &mdss_gdsc, + [CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc, + [CAMSS_VFE_GDSC] = &camss_vfe_gdsc, + [OXILI_GDSC] = &oxili_gdsc, + [OXILICX_GDSC] = &oxilicx_gdsc, +}; + static const struct regmap_config mmcc_apq8084_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -3306,6 +3360,8 @@ static const struct qcom_cc_desc mmcc_apq8084_desc = { .num_clks = ARRAY_SIZE(mmcc_apq8084_clocks), .resets = mmcc_apq8084_resets, .num_resets = ARRAY_SIZE(mmcc_apq8084_resets), + .gdscs = mmcc_apq8084_gdscs, + .num_gdscs = ARRAY_SIZE(mmcc_apq8084_gdscs), }; static const struct of_device_id mmcc_apq8084_match_table[] = { diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index e8b33bbc362f..9711bca9cc06 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -33,18 +33,21 @@ #include "clk-branch.h" #include "reset.h" -#define P_PXO 0 -#define P_PLL8 1 -#define P_PLL2 2 -#define P_PLL3 3 -#define P_PLL15 3 +enum { + P_PXO, + P_PLL8, + P_PLL2, + P_PLL3, + P_PLL15, + P_HDMI_PLL, +}; #define F_MN(f, s, _m, _n) { .freq = f, .src = s, .m = _m, .n = _n } -static u8 mmcc_pxo_pll8_pll2_map[] = { - [P_PXO] = 0, - [P_PLL8] = 2, - [P_PLL2] = 1, +static const struct parent_map mmcc_pxo_pll8_pll2_map[] = { + { P_PXO, 0 }, + { P_PLL8, 2 }, + { P_PLL2, 1 } }; static const char *mmcc_pxo_pll8_pll2[] = { @@ -53,11 +56,11 @@ static const char *mmcc_pxo_pll8_pll2[] = { "pll2", }; -static u8 mmcc_pxo_pll8_pll2_pll3_map[] = { - [P_PXO] = 0, - [P_PLL8] = 2, - [P_PLL2] = 1, - [P_PLL3] = 3, +static const struct parent_map mmcc_pxo_pll8_pll2_pll3_map[] = { + { P_PXO, 0 }, + { P_PLL8, 2 }, + { P_PLL2, 1 }, + { P_PLL3, 3 } }; static const char *mmcc_pxo_pll8_pll2_pll15[] = { @@ -67,11 +70,11 @@ static const char *mmcc_pxo_pll8_pll2_pll15[] = { "pll15", }; -static u8 mmcc_pxo_pll8_pll2_pll15_map[] = { - [P_PXO] = 0, - [P_PLL8] = 2, - [P_PLL2] = 1, - [P_PLL15] = 3, +static const struct parent_map mmcc_pxo_pll8_pll2_pll15_map[] = { + { P_PXO, 0 }, + { P_PLL8, 2 }, + { P_PLL2, 1 }, + { P_PLL15, 3 } }; static const char *mmcc_pxo_pll8_pll2_pll3[] = { @@ -1377,11 +1380,9 @@ static struct clk_branch rot_clk = { }, }; -#define P_HDMI_PLL 1 - -static u8 mmcc_pxo_hdmi_map[] = { - [P_PXO] = 0, - [P_HDMI_PLL] = 3, +static const struct parent_map mmcc_pxo_hdmi_map[] = { + { P_PXO, 0 }, + { P_HDMI_PLL, 3 } }; static const char *mmcc_pxo_hdmi[] = { diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index be94c54a9a4f..36242ae1d368 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -31,27 +31,30 @@ #include "clk-rcg.h" #include "clk-branch.h" #include "reset.h" - -#define P_XO 0 -#define P_MMPLL0 1 -#define P_EDPLINK 1 -#define P_MMPLL1 2 -#define P_HDMIPLL 2 -#define P_GPLL0 3 -#define P_EDPVCO 3 -#define P_GPLL1 4 -#define P_DSI0PLL 4 -#define P_DSI0PLL_BYTE 4 -#define P_MMPLL2 4 -#define P_MMPLL3 4 -#define P_DSI1PLL 5 -#define P_DSI1PLL_BYTE 5 - -static const u8 mmcc_xo_mmpll0_mmpll1_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, +#include "gdsc.h" + +enum { + P_XO, + P_MMPLL0, + P_EDPLINK, + P_MMPLL1, + P_HDMIPLL, + P_GPLL0, + P_EDPVCO, + P_GPLL1, + P_DSI0PLL, + P_DSI0PLL_BYTE, + P_MMPLL2, + P_MMPLL3, + P_DSI1PLL, + P_DSI1PLL_BYTE, +}; + +static const struct parent_map mmcc_xo_mmpll0_mmpll1_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 } }; static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = { @@ -61,13 +64,13 @@ static const char *mmcc_xo_mmpll0_mmpll1_gpll0[] = { "mmss_gpll0_vote", }; -static const u8 mmcc_xo_mmpll0_dsi_hdmi_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_HDMIPLL] = 4, - [P_GPLL0] = 5, - [P_DSI0PLL] = 2, - [P_DSI1PLL] = 3, +static const struct parent_map mmcc_xo_mmpll0_dsi_hdmi_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_HDMIPLL, 4 }, + { P_GPLL0, 5 }, + { P_DSI0PLL, 2 }, + { P_DSI1PLL, 3 } }; static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = { @@ -79,12 +82,12 @@ static const char *mmcc_xo_mmpll0_dsi_hdmi_gpll0[] = { "dsi1pll", }; -static const u8 mmcc_xo_mmpll0_1_2_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_MMPLL2] = 3, +static const struct parent_map mmcc_xo_mmpll0_1_2_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_MMPLL2, 3 } }; static const char *mmcc_xo_mmpll0_1_2_gpll0[] = { @@ -95,12 +98,12 @@ static const char *mmcc_xo_mmpll0_1_2_gpll0[] = { "mmpll2", }; -static const u8 mmcc_xo_mmpll0_1_3_gpll0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_MMPLL3] = 3, +static const struct parent_map mmcc_xo_mmpll0_1_3_gpll0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_MMPLL3, 3 } }; static const char *mmcc_xo_mmpll0_1_3_gpll0[] = { @@ -111,12 +114,12 @@ static const char *mmcc_xo_mmpll0_1_3_gpll0[] = { "mmpll3", }; -static const u8 mmcc_xo_mmpll0_1_gpll1_0_map[] = { - [P_XO] = 0, - [P_MMPLL0] = 1, - [P_MMPLL1] = 2, - [P_GPLL0] = 5, - [P_GPLL1] = 4, +static const struct parent_map mmcc_xo_mmpll0_1_gpll1_0_map[] = { + { P_XO, 0 }, + { P_MMPLL0, 1 }, + { P_MMPLL1, 2 }, + { P_GPLL0, 5 }, + { P_GPLL1, 4 } }; static const char *mmcc_xo_mmpll0_1_gpll1_0[] = { @@ -127,13 +130,13 @@ static const char *mmcc_xo_mmpll0_1_gpll1_0[] = { "gpll1_vote", }; -static const u8 mmcc_xo_dsi_hdmi_edp_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_EDPVCO] = 5, - [P_DSI0PLL] = 1, - [P_DSI1PLL] = 2, +static const struct parent_map mmcc_xo_dsi_hdmi_edp_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_EDPVCO, 5 }, + { P_DSI0PLL, 1 }, + { P_DSI1PLL, 2 } }; static const char *mmcc_xo_dsi_hdmi_edp[] = { @@ -145,13 +148,13 @@ static const char *mmcc_xo_dsi_hdmi_edp[] = { "dsi1pll", }; -static const u8 mmcc_xo_dsi_hdmi_edp_gpll0_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_GPLL0] = 5, - [P_DSI0PLL] = 1, - [P_DSI1PLL] = 2, +static const struct parent_map mmcc_xo_dsi_hdmi_edp_gpll0_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_GPLL0, 5 }, + { P_DSI0PLL, 1 }, + { P_DSI1PLL, 2 } }; static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = { @@ -163,13 +166,13 @@ static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = { "dsi1pll", }; -static const u8 mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = { - [P_XO] = 0, - [P_EDPLINK] = 4, - [P_HDMIPLL] = 3, - [P_GPLL0] = 5, - [P_DSI0PLL_BYTE] = 1, - [P_DSI1PLL_BYTE] = 2, +static const struct parent_map mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = { + { P_XO, 0 }, + { P_EDPLINK, 4 }, + { P_HDMIPLL, 3 }, + { P_GPLL0, 5 }, + { P_DSI0PLL_BYTE, 1 }, + { P_DSI1PLL_BYTE, 2 } }; static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = { @@ -2347,6 +2350,48 @@ static struct pll_config mmpll3_config = { .aux_output_mask = BIT(1), }; +static struct gdsc venus0_gdsc = { + .gdscr = 0x1024, + .pd = { + .name = "venus0", + }, +}; + +static struct gdsc mdss_gdsc = { + .gdscr = 0x2304, + .pd = { + .name = "mdss", + }, +}; + +static struct gdsc camss_jpeg_gdsc = { + .gdscr = 0x35a4, + .pd = { + .name = "camss_jpeg", + }, +}; + +static struct gdsc camss_vfe_gdsc = { + .gdscr = 0x36a4, + .pd = { + .name = "camss_vfe", + }, +}; + +static struct gdsc oxili_gdsc = { + .gdscr = 0x4024, + .pd = { + .name = "oxili", + }, +}; + +static struct gdsc oxilicx_gdsc = { + .gdscr = 0x4034, + .pd = { + .name = "oxilicx", + }, +}; + static struct clk_regmap *mmcc_msm8974_clocks[] = { [MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr, [MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr, @@ -2523,6 +2568,15 @@ static const struct qcom_reset_map mmcc_msm8974_resets[] = { [OCMEMNOC_RESET] = { 0x50b0 }, }; +static struct gdsc *mmcc_msm8974_gdscs[] = { + [VENUS0_GDSC] = &venus0_gdsc, + [MDSS_GDSC] = &mdss_gdsc, + [CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc, + [CAMSS_VFE_GDSC] = &camss_vfe_gdsc, + [OXILI_GDSC] = &oxili_gdsc, + [OXILICX_GDSC] = &oxilicx_gdsc, +}; + static const struct regmap_config mmcc_msm8974_regmap_config = { .reg_bits = 32, .reg_stride = 4, @@ -2537,6 +2591,8 @@ static const struct qcom_cc_desc mmcc_msm8974_desc = { .num_clks = ARRAY_SIZE(mmcc_msm8974_clocks), .resets = mmcc_msm8974_resets, .num_resets = ARRAY_SIZE(mmcc_msm8974_resets), + .gdscs = mmcc_msm8974_gdscs, + .num_gdscs = ARRAY_SIZE(mmcc_msm8974_gdscs), }; static const struct of_device_id mmcc_msm8974_match_table[] = { diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 1b06fc4640e2..3829d5521dfc 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -137,6 +137,15 @@ config ARM_OMAP2PLUS_CPUFREQ depends on ARCH_OMAP2PLUS default ARCH_OMAP2PLUS +config ARM_QCOM_CPUFREQ + tristate "Qualcomm based" + depends on ARCH_QCOM + select PM_OPP + help + This adds the CPUFreq driver for Qualcomm SoC based boards. + + If in doubt, say N. + config ARM_S3C_CPUFREQ bool help diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 82a1821471fd..be95ed8d6873 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o +obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o diff --git a/drivers/cpufreq/qcom-cpufreq.c b/drivers/cpufreq/qcom-cpufreq.c new file mode 100644 index 000000000000..c9f86a062cdd --- /dev/null +++ b/drivers/cpufreq/qcom-cpufreq.c @@ -0,0 +1,204 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_opp.h> +#include <linux/slab.h> +#include <linux/cpufreq-dt.h> + +static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver) +{ + void __iomem *base; + u32 pte_efuse; + + *speed = *pvs = *pvs_ver = 0; + + base = ioremap(0x007000c0, 4); + if (!base) { + pr_warn("Unable to read efuse data. Defaulting to 0!\n"); + return; + } + + pte_efuse = readl_relaxed(base); + iounmap(base); + + *speed = pte_efuse & 0xf; + if (*speed == 0xf) + *speed = (pte_efuse >> 4) & 0xf; + + if (*speed == 0xf) { + *speed = 0; + pr_warn("Speed bin: Defaulting to %d\n", *speed); + } else { + pr_info("Speed bin: %d\n", *speed); + } + + *pvs = (pte_efuse >> 10) & 0x7; + if (*pvs == 0x7) + *pvs = (pte_efuse >> 13) & 0x7; + + if (*pvs == 0x7) { + *pvs = 0; + pr_warn("PVS bin: Defaulting to %d\n", *pvs); + } else { + pr_info("PVS bin: %d\n", *pvs); + } +} + +static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver) +{ + u32 pte_efuse, redundant_sel; + void __iomem *base; + + *speed = 0; + *pvs = 0; + *pvs_ver = 0; + + base = ioremap(0xfc4b80b0, 8); + if (!base) { + pr_warn("Unable to read efuse data. Defaulting to 0!\n"); + return; + } + + pte_efuse = readl_relaxed(base); + redundant_sel = (pte_efuse >> 24) & 0x7; + *speed = pte_efuse & 0x7; + /* 4 bits of PVS are in efuse register bits 31, 8-6. */ + *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); + *pvs_ver = (pte_efuse >> 4) & 0x3; + + switch (redundant_sel) { + case 1: + *speed = (pte_efuse >> 27) & 0xf; + break; + case 2: + *pvs = (pte_efuse >> 27) & 0xf; + break; + } + + /* Check SPEED_BIN_BLOW_STATUS */ + if (pte_efuse & BIT(3)) { + pr_info("Speed bin: %d\n", *speed); + } else { + pr_warn("Speed bin not set. Defaulting to 0!\n"); + *speed = 0; + } + + /* Check PVS_BLOW_STATUS */ + pte_efuse = readl_relaxed(base + 0x4) & BIT(21); + if (pte_efuse) { + pr_info("PVS bin: %d\n", *pvs); + } else { + pr_warn("PVS bin not set. Defaulting to 0!\n"); + *pvs = 0; + } + + pr_info("PVS version: %d\n", *pvs_ver); + iounmap(base); +} + +static int __init qcom_cpufreq_populate_opps(void) +{ + int len, rows, cols, i, k, speed, pvs, pvs_ver; + char table_name[] = "qcom,speedXX-pvsXX-bin-vXX"; + struct device_node *np; + struct device *dev; + int cpu = 0; + + np = of_find_node_by_name(NULL, "qcom,pvs"); + if (!np) + return -ENODEV; + + if (of_property_read_bool(np, "qcom,pvs-format-a")) { + get_krait_bin_format_a(&speed, &pvs, &pvs_ver); + cols = 2; + } else if (of_property_read_bool(np, "qcom,pvs-format-b")) { + get_krait_bin_format_b(&speed, &pvs, &pvs_ver); + cols = 3; + } else { + return -ENODEV; + } + + snprintf(table_name, sizeof(table_name), + "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver); + + if (!of_find_property(np, table_name, &len)) + return -EINVAL; + + len /= sizeof(u32); + if (len % cols || len == 0) + return -EINVAL; + + rows = len / cols; + + for (i = 0, k = 0; i < rows; i++) { + u32 freq, volt; + + of_property_read_u32_index(np, table_name, k++, &freq); + of_property_read_u32_index(np, table_name, k++, &volt); + while (k % cols) + k++; /* Skip uA entries if present */ + for (cpu = 0; cpu < num_possible_cpus(); cpu++) { + dev = get_cpu_device(cpu); + if (!dev) + return -ENODEV; + if (dev_pm_opp_add(dev, freq, volt)) + pr_warn("failed to add OPP %u\n", freq); + } + } + + return 0; +} + +static int __init qcom_cpufreq_driver_init(void) +{ + struct cpufreq_dt_platform_data pdata = { .independent_clocks = true }; + struct platform_device_info devinfo = { + .name = "cpufreq-dt", + .data = &pdata, + .size_data = sizeof(pdata), + }; + struct device *cpu_dev; + struct device_node *np; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) + return -ENODEV; + + np = of_node_get(cpu_dev->of_node); + if (!np) + return -ENOENT; + + if (!of_device_is_compatible(np, "qcom,krait")) { + of_node_put(np); + return -ENODEV; + } + of_node_put(np); + + ret = qcom_cpufreq_populate_opps(); + if (ret) + return ret; + + return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo)); +} +module_init(qcom_cpufreq_driver_init); + +MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig index c5029c1209b4..8c7930b5a65f 100644 --- a/drivers/cpuidle/Kconfig +++ b/drivers/cpuidle/Kconfig @@ -29,15 +29,10 @@ config DT_IDLE_STATES bool menu "ARM CPU Idle Drivers" -depends on ARM +depends on ARM || ARM64 source "drivers/cpuidle/Kconfig.arm" endmenu -menu "ARM64 CPU Idle Drivers" -depends on ARM64 -source "drivers/cpuidle/Kconfig.arm64" -endmenu - menu "MIPS CPU Idle Drivers" depends on MIPS source "drivers/cpuidle/Kconfig.mips" diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 8e07c9419153..325be7fe4e8d 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -1,10 +1,20 @@ # # ARM CPU Idle drivers # +config ARM_CPUIDLE + bool "Generic ARM/ARM64 CPU idle Driver" + select DT_IDLE_STATES + help + Select this to enable generic cpuidle driver for ARM. + It provides a generic idle driver whose idle states are configured + at run-time through DT nodes. The CPUidle suspend backend is + initialized by calling the CPU operations init idle hook + provided by architecture code. + config ARM_BIG_LITTLE_CPUIDLE bool "Support for ARM big.LITTLE processors" depends on ARCH_VEXPRESS_TC2_PM || ARCH_EXYNOS - depends on MCPM + depends on MCPM && !ARM64 select ARM_CPU_SUSPEND select CPU_IDLE_MULTIPLE_DRIVERS select DT_IDLE_STATES @@ -16,51 +26,58 @@ config ARM_BIG_LITTLE_CPUIDLE config ARM_CLPS711X_CPUIDLE bool "CPU Idle Driver for CLPS711X processors" - depends on ARCH_CLPS711X || COMPILE_TEST + depends on ARCH_CLPS711X && !ARM64 || COMPILE_TEST help Select this to enable cpuidle on Cirrus Logic CLPS711X SOCs. config ARM_HIGHBANK_CPUIDLE bool "CPU Idle Driver for Calxeda processors" - depends on ARM_PSCI + depends on ARM_PSCI && !ARM64 select ARM_CPU_SUSPEND help Select this to enable cpuidle on Calxeda processors. config ARM_KIRKWOOD_CPUIDLE bool "CPU Idle Driver for Marvell Kirkwood SoCs" - depends on MACH_KIRKWOOD + depends on MACH_KIRKWOOD && !ARM64 help This adds the CPU Idle driver for Marvell Kirkwood SoCs. config ARM_ZYNQ_CPUIDLE bool "CPU Idle Driver for Xilinx Zynq processors" - depends on ARCH_ZYNQ + depends on ARCH_ZYNQ && !ARM64 help Select this to enable cpuidle on Xilinx Zynq processors. config ARM_U8500_CPUIDLE bool "Cpu Idle Driver for the ST-E u8500 processors" - depends on ARCH_U8500 + depends on ARCH_U8500 && !ARM64 help Select this to enable cpuidle for ST-E u8500 processors config ARM_AT91_CPUIDLE bool "Cpu Idle Driver for the AT91 processors" default y - depends on ARCH_AT91 + depends on ARCH_AT91 && !ARM64 help Select this to enable cpuidle for AT91 processors config ARM_EXYNOS_CPUIDLE bool "Cpu Idle Driver for the Exynos processors" - depends on ARCH_EXYNOS + depends on ARCH_EXYNOS && !ARM64 select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP help Select this to enable cpuidle for Exynos processors config ARM_MVEBU_V7_CPUIDLE bool "CPU Idle Driver for mvebu v7 family processors" - depends on ARCH_MVEBU + depends on ARCH_MVEBU && !ARM64 help Select this to enable cpuidle on Armada 370, 38x and XP processors. + +config ARM_QCOM_CPUIDLE + bool "CPU Idle Driver for QCOM processors" + depends on ARCH_QCOM + select ARM_CPUIDLE + help + Select this to enable cpuidle on QCOM processors. diff --git a/drivers/cpuidle/Kconfig.arm64 b/drivers/cpuidle/Kconfig.arm64 deleted file mode 100644 index 6effb3656735..000000000000 --- a/drivers/cpuidle/Kconfig.arm64 +++ /dev/null @@ -1,13 +0,0 @@ -# -# ARM64 CPU Idle drivers -# - -config ARM64_CPUIDLE - bool "Generic ARM64 CPU idle Driver" - select DT_IDLE_STATES - help - Select this to enable generic cpuidle driver for ARM64. - It provides a generic idle driver whose idle states are configured - at run-time through DT nodes. The CPUidle suspend backend is - initialized by calling the CPU operations init idle hook - provided by architecture code. diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 4d177b916f75..3ba81b1dffad 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -17,16 +17,13 @@ obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o +obj-$(CONFIG_ARM_CPUIDLE) += cpuidle-arm.o ############################################################################### # MIPS drivers obj-$(CONFIG_MIPS_CPS_CPUIDLE) += cpuidle-cps.o ############################################################################### -# ARM64 drivers -obj-$(CONFIG_ARM64_CPUIDLE) += cpuidle-arm64.o - -############################################################################### # POWERPC drivers obj-$(CONFIG_PSERIES_CPUIDLE) += cpuidle-pseries.o obj-$(CONFIG_POWERNV_CPUIDLE) += cpuidle-powernv.o diff --git a/drivers/cpuidle/cpuidle-arm64.c b/drivers/cpuidle/cpuidle-arm.c index 39a2c62716c3..545069d5fdfb 100644 --- a/drivers/cpuidle/cpuidle-arm64.c +++ b/drivers/cpuidle/cpuidle-arm.c @@ -1,5 +1,5 @@ /* - * ARM64 generic CPU idle driver. + * ARM/ARM64 generic CPU idle driver. * * Copyright (C) 2014 ARM Ltd. * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -#define pr_fmt(fmt) "CPUidle arm64: " fmt +#define pr_fmt(fmt) "CPUidle arm: " fmt #include <linux/cpuidle.h> #include <linux/cpumask.h> @@ -17,13 +17,14 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/slab.h> #include <asm/cpuidle.h> #include "dt_idle_states.h" /* - * arm64_enter_idle_state - Programs CPU to enter the specified state + * arm_enter_idle_state - Programs CPU to enter the specified state * * dev: cpuidle device * drv: cpuidle driver @@ -32,8 +33,8 @@ * Called from the CPUidle framework to program the device to the * specified target state selected by the governor. */ -static int arm64_enter_idle_state(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int idx) +static int arm_enter_idle_state(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int idx) { int ret; @@ -49,7 +50,7 @@ static int arm64_enter_idle_state(struct cpuidle_device *dev, * call the CPU ops suspend protocol with idle index as a * parameter. */ - ret = cpu_suspend(idx); + arm_cpuidle_suspend(idx); cpu_pm_exit(); } @@ -57,8 +58,8 @@ static int arm64_enter_idle_state(struct cpuidle_device *dev, return ret ? -1 : idx; } -static struct cpuidle_driver arm64_idle_driver = { - .name = "arm64_idle", +static struct cpuidle_driver arm_idle_driver = { + .name = "arm_idle", .owner = THIS_MODULE, /* * State at index 0 is standby wfi and considered standard @@ -68,32 +69,33 @@ static struct cpuidle_driver arm64_idle_driver = { * handler for idle state index 0. */ .states[0] = { - .enter = arm64_enter_idle_state, + .enter = arm_enter_idle_state, .exit_latency = 1, .target_residency = 1, .power_usage = UINT_MAX, .name = "WFI", - .desc = "ARM64 WFI", + .desc = "ARM WFI", } }; -static const struct of_device_id arm64_idle_state_match[] __initconst = { +static const struct of_device_id arm_idle_state_match[] __initconst = { { .compatible = "arm,idle-state", - .data = arm64_enter_idle_state }, + .data = arm_enter_idle_state }, { }, }; /* - * arm64_idle_init + * arm_idle_init * - * Registers the arm64 specific cpuidle driver with the cpuidle + * Registers the arm specific cpuidle driver with the cpuidle * framework. It relies on core code to parse the idle states * and initialize them using driver data structures accordingly. */ -static int __init arm64_idle_init(void) +static int __init arm_idle_init(void) { int cpu, ret; - struct cpuidle_driver *drv = &arm64_idle_driver; + struct cpuidle_driver *drv = &arm_idle_driver; + struct cpuidle_device *dev; /* * Initialize idle states data, starting at index 1. @@ -101,22 +103,61 @@ static int __init arm64_idle_init(void) * let the driver initialization fail accordingly since there is no * reason to initialize the idle driver if only wfi is supported. */ - ret = dt_init_idle_driver(drv, arm64_idle_state_match, 1); + ret = dt_init_idle_driver(drv, arm_idle_state_match, 1); if (ret <= 0) return ret ? : -ENODEV; + ret = cpuidle_register_driver(drv); + if (ret) { + pr_err("Failed to register cpuidle driver\n"); + return ret; + } + /* * Call arch CPU operations in order to initialize * idle states suspend back-end specific data */ for_each_possible_cpu(cpu) { - ret = cpu_init_idle(cpu); + ret = arm_cpuidle_init(cpu); + + /* + * Skip the cpuidle device initialization if the reported + * failure is a HW misconfiguration/breakage (-ENXIO). + */ + if (ret == -ENXIO) + continue; + if (ret) { pr_err("CPU %d failed to init idle CPU ops\n", cpu); - return ret; + goto out_fail; + } + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + pr_err("Failed to allocate cpuidle device\n"); + goto out_fail; + } + dev->cpu = cpu; + + ret = cpuidle_register_device(dev); + if (ret) { + pr_err("Failed to register cpuidle device for CPU %d\n", + cpu); + kfree(dev); + goto out_fail; } } - return cpuidle_register(drv, NULL); + return 0; +out_fail: + while (--cpu >= 0) { + dev = per_cpu(cpuidle_devices, cpu); + cpuidle_unregister_device(dev); + kfree(dev); + } + + cpuidle_unregister_driver(drv); + + return ret; } -device_initcall(arm64_idle_init); +device_initcall(arm_idle_init); diff --git a/drivers/cpuidle/cpuidle-at91.c b/drivers/cpuidle/cpuidle-at91.c index aae7bfc1ea36..f2446c78d87c 100644 --- a/drivers/cpuidle/cpuidle-at91.c +++ b/drivers/cpuidle/cpuidle-at91.c @@ -19,7 +19,6 @@ #include <linux/cpuidle.h> #include <linux/io.h> #include <linux/export.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #define AT91_MAX_STATES 2 diff --git a/drivers/cpuidle/cpuidle-exynos.c b/drivers/cpuidle/cpuidle-exynos.c index 26f5f29fdb03..0c06ea2f50bb 100644 --- a/drivers/cpuidle/cpuidle-exynos.c +++ b/drivers/cpuidle/cpuidle-exynos.c @@ -19,7 +19,6 @@ #include <linux/of.h> #include <linux/platform_data/cpuidle-exynos.h> -#include <asm/proc-fns.h> #include <asm/suspend.h> #include <asm/cpuidle.h> diff --git a/drivers/cpuidle/cpuidle-kirkwood.c b/drivers/cpuidle/cpuidle-kirkwood.c index cea0a6c4b1db..d23d8f468c12 100644 --- a/drivers/cpuidle/cpuidle-kirkwood.c +++ b/drivers/cpuidle/cpuidle-kirkwood.c @@ -21,7 +21,6 @@ #include <linux/cpuidle.h> #include <linux/io.h> #include <linux/export.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #define KIRKWOOD_MAX_STATES 2 diff --git a/drivers/cpuidle/cpuidle-ux500.c b/drivers/cpuidle/cpuidle-ux500.c index 66f81e410f0d..8bf895c0017d 100644 --- a/drivers/cpuidle/cpuidle-ux500.c +++ b/drivers/cpuidle/cpuidle-ux500.c @@ -19,7 +19,6 @@ #include <linux/platform_device.h> #include <asm/cpuidle.h> -#include <asm/proc-fns.h> static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); diff --git a/drivers/cpuidle/cpuidle-zynq.c b/drivers/cpuidle/cpuidle-zynq.c index 002b8c9f98f5..543292b1d38e 100644 --- a/drivers/cpuidle/cpuidle-zynq.c +++ b/drivers/cpuidle/cpuidle-zynq.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/cpuidle.h> #include <linux/platform_device.h> -#include <asm/proc-fns.h> #include <asm/cpuidle.h> #define ZYNQ_MAX_STATES 2 diff --git a/drivers/eeprom/Kconfig b/drivers/eeprom/Kconfig new file mode 100644 index 000000000000..8fc14d35364b --- /dev/null +++ b/drivers/eeprom/Kconfig @@ -0,0 +1,37 @@ +menuconfig EEPROM + tristate "EEPROM Support" + depends on OF + select REGMAP + help + Support for EEPROM alike devices. + + This framework is designed to provide a generic interface to EEPROM + from both the Linux Kernel and the userspace. + + If unsure, say no. + +if EEPROM + +config EEPROM_SUNXI_SID + tristate "Allwinner SoCs SID support" + depends on ARCH_SUNXI + select REGMAP_MMIO + help + This is a driver for the 'security ID' available on various Allwinner + devices. + + This driver can also be built as a module. If so, the module + will be called eeprom-sunxi-sid. + +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on ARCH_QCOM + select REGMAP_MMIO + help + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via eeprom interface. + + This driver can also be built as a module. If so, the module + will be called eeprom-qfprom. + +endif diff --git a/drivers/eeprom/Makefile b/drivers/eeprom/Makefile new file mode 100644 index 000000000000..4ac437ec15a8 --- /dev/null +++ b/drivers/eeprom/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for eeprom drivers. +# + +obj-$(CONFIG_EEPROM) += eeprom_core.o +eeprom_core-y := core.o + +# Devices +obj-$(CONFIG_EEPROM_SUNXI_SID) += eeprom-sunxi-sid.o +eeprom-sunxi-sid-y := sunxi-sid.o +obj-$(CONFIG_QCOM_QFPROM) += eeprom_qfprom.o +eeprom_qfprom-y := qfprom.o diff --git a/drivers/eeprom/core.c b/drivers/eeprom/core.c new file mode 100644 index 000000000000..43d03ef85351 --- /dev/null +++ b/drivers/eeprom/core.c @@ -0,0 +1,531 @@ +/* + * EEPROM framework core. + * + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/eeprom-provider.h> +#include <linux/eeprom-consumer.h> +#include <linux/export.h> +#include <linux/fs.h> +#include <linux/idr.h> +#include <linux/init.h> +#include <linux/regmap.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/uaccess.h> + +struct eeprom_device { + struct regmap *regmap; + int stride; + size_t size; + + struct module *owner; + struct device dev; + int id; + int users; +}; + +struct eeprom_cell { + struct eeprom_device *eeprom; + int nblocks; + int size; + struct eeprom_block blocks[0]; +}; + +static DEFINE_MUTEX(eeprom_mutex); +static DEFINE_IDA(eeprom_ida); + +#define to_eeprom(d) container_of(d, struct eeprom_device, dev) + +static ssize_t bin_attr_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t offset, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct eeprom_device *eeprom = to_eeprom(dev); + int rc; + + if (offset > eeprom->size) + return -EINVAL; + + if (offset + count > eeprom->size) + count = eeprom->size - offset; + + rc = regmap_bulk_read(eeprom->regmap, offset, + buf, count/eeprom->stride); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count - count % eeprom->stride; +} + +static ssize_t bin_attr_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t offset, size_t count) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct eeprom_device *eeprom = to_eeprom(dev); + int rc; + + if (offset > eeprom->size) + return -EINVAL; + + if (offset + count > eeprom->size) + count = eeprom->size - offset; + + rc = regmap_bulk_write(eeprom->regmap, offset, + buf, count/eeprom->stride); + + if (IS_ERR_VALUE(rc)) + return rc; + + return count - count % eeprom->stride; +} + +static struct bin_attribute bin_attr_eeprom = { + .attr = { + .name = "eeprom", + .mode = S_IWUSR | S_IRUGO, + }, + .read = bin_attr_eeprom_read, + .write = bin_attr_eeprom_write, +}; + +static struct bin_attribute *eeprom_bin_attributes[] = { + &bin_attr_eeprom, + NULL, +}; + +static const struct attribute_group eeprom_bin_group = { + .bin_attrs = eeprom_bin_attributes, +}; + +static const struct attribute_group *eeprom_dev_groups[] = { + &eeprom_bin_group, + NULL, +}; + +static void eeprom_release(struct device *dev) +{ + struct eeprom_device *eeprom = to_eeprom(dev); + + ida_simple_remove(&eeprom_ida, eeprom->id); + kfree(eeprom); +} + +static struct class eeprom_class = { + .name = "eeprom", + .dev_groups = eeprom_dev_groups, + .dev_release = eeprom_release, +}; + +static int of_eeprom_match(struct device *dev, const void *eeprom_np) +{ + return dev->of_node == eeprom_np; +} + +static struct eeprom_device *of_eeprom_find(struct device_node *eeprom_np) +{ + struct device *d; + + if (!eeprom_np) + return NULL; + + d = class_find_device(&eeprom_class, NULL, eeprom_np, of_eeprom_match); + + return d ? to_eeprom(d) : NULL; +} + +static int eeprom_match(struct device *dev, const void *data) +{ + return !strcmp(dev_name(dev), (const char *)data); +} + +static struct eeprom_device *eeprom_find(const char *name) +{ + struct device *d; + + d = class_find_device(&eeprom_class, NULL, (void *)name, eeprom_match); + + return d ? to_eeprom(d) : NULL; +} + +/** + * eeprom_register(): Register a eeprom device for given eeprom. + * Also creates an binary entry in /sys/class/eeprom/name-id/eeprom + * + * @eeprom: eeprom device that needs to be created + * + * The return value will be an error code on error or a zero on success. + * The eeprom_device and sysfs entery will be freed by the eeprom_unregister(). + */ + +struct eeprom_device *eeprom_register(struct eeprom_config *config) +{ + struct eeprom_device *eeprom; + struct regmap *rm; + int rval; + + if (!config->dev) + return ERR_PTR(-EINVAL); + + rm = dev_get_regmap(config->dev, NULL); + if (!rm) { + dev_err(config->dev, "Regmap not found\n"); + return ERR_PTR(-EINVAL); + } + + eeprom = kzalloc(sizeof(*eeprom), GFP_KERNEL); + if (!eeprom) + return ERR_PTR(-ENOMEM); + + eeprom->id = ida_simple_get(&eeprom_ida, 0, 0, GFP_KERNEL); + if (eeprom->id < 0) { + kfree(eeprom); + return ERR_PTR(eeprom->id); + } + + eeprom->regmap = rm; + eeprom->owner = config->owner; + eeprom->stride = regmap_get_reg_stride(rm); + eeprom->size = regmap_get_max_register(rm); + eeprom->dev.class = &eeprom_class; + eeprom->dev.parent = config->dev; + eeprom->dev.of_node = config->dev ? config->dev->of_node : NULL; + dev_set_name(&eeprom->dev, "%s%d", + config->name ? : "eeprom", config->id); + + device_initialize(&eeprom->dev); + + dev_dbg(&eeprom->dev, "Registering eeprom device %s\n", + dev_name(&eeprom->dev)); + + rval = device_add(&eeprom->dev); + if (rval) { + ida_simple_remove(&eeprom_ida, eeprom->id); + kfree(eeprom); + return ERR_PTR(rval); + } + + return eeprom; +} +EXPORT_SYMBOL_GPL(eeprom_register); + +/** + * eeprom_unregister(): Unregister previously registered eeprom device + * + * @eeprom: Pointer to previously registered eeprom device. + * + * The return value will be an non zero on error or a zero on success. + */ +int eeprom_unregister(struct eeprom_device *eeprom) +{ + mutex_lock(&eeprom_mutex); + if (eeprom->users) { + mutex_unlock(&eeprom_mutex); + return -EBUSY; + } + mutex_unlock(&eeprom_mutex); + + device_del(&eeprom->dev); + + return 0; +} +EXPORT_SYMBOL_GPL(eeprom_unregister); + +static int eeprom_cell_sanity_check(struct eeprom_cell *cell) +{ + struct eeprom_device *eeprom = cell->eeprom; + int i; + + /* byte aligned, no need to check for stride sanity */ + if (eeprom->stride == 1) + return 0; + + for (i = 0; i < cell->nblocks; i++) { + if (!IS_ALIGNED(cell->blocks[i].offset, eeprom->stride) || + !IS_ALIGNED(cell->blocks[i].count, eeprom->stride)) { + dev_err(&eeprom->dev, + "cell unaligned to eeprom stride %d\n", + eeprom->stride); + return -EINVAL; + } + } + + return 0; +} + +static struct eeprom_cell *__eeprom_cell_get(struct device_node *cell_np, + const char *ename, + struct eeprom_block *blocks, + int nblocks) +{ + struct eeprom_cell *cell; + struct eeprom_device *eeprom = NULL; + struct property *prop; + const __be32 *vp; + u32 pv; + int i, rval; + + mutex_lock(&eeprom_mutex); + + eeprom = cell_np ? of_eeprom_find(cell_np->parent) : eeprom_find(ename); + if (!eeprom) { + mutex_unlock(&eeprom_mutex); + return ERR_PTR(-EPROBE_DEFER); + } + + eeprom->users++; + mutex_unlock(&eeprom_mutex); + + if (!try_module_get(eeprom->owner)) { + dev_err(&eeprom->dev, + "could not increase module refcount for cell %s\n", + ename); + rval = -EINVAL; + goto err_mod; + } + + if (cell_np) + nblocks = of_property_count_u32_elems(cell_np, "reg") / 2; + + cell = kzalloc(sizeof(*cell) + nblocks * sizeof(*blocks), GFP_KERNEL); + if (!cell) { + rval = -ENOMEM; + goto err_mem; + } + + cell->nblocks = nblocks; + cell->eeprom = eeprom; + cell->size = 0; + i = 0; + + if (cell_np) { + of_property_for_each_u32(cell_np, "reg", prop, vp, pv) { + cell->blocks[i].offset = pv; + vp = of_prop_next_u32(prop, vp, &pv); + cell->blocks[i].count = pv; + cell->size += pv; + i++; + } + } else { + memcpy(cell->blocks, blocks, nblocks * sizeof(*blocks)); + for (; i < nblocks; i++) + cell->size += blocks[i].count; + } + + if (IS_ERR_VALUE(eeprom_cell_sanity_check(cell))) { + rval = -EINVAL; + goto err_sanity; + } + + return cell; + +err_sanity: + kfree(cell); + +err_mem: + module_put(eeprom->owner); + +err_mod: + mutex_lock(&eeprom_mutex); + eeprom->users--; + mutex_unlock(&eeprom_mutex); + + return ERR_PTR(rval); + +} + +/** + * eeprom_cell_get(): Get eeprom cell of device form a given eeprom name + * and blocks. + * + * @ename: eeprom device name that needs to be looked-up. + * @blocks: eeprom blocks containing offset and length information. + * @nblocks: number of eeprom blocks. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct eeprom_cell. The eeprom_cell will be freed by the + * eeprom_cell_put(). + */ +struct eeprom_cell *eeprom_cell_get(const char *ename, + struct eeprom_block *blocks, int nblocks) +{ + return __eeprom_cell_get(NULL, ename, blocks, nblocks); +} +EXPORT_SYMBOL_GPL(eeprom_cell_get); + +/** + * of_eeprom_cell_get(): Get eeprom cell of device form a given index + * + * @dev: Device that will be interacted with + * @index: eeprom index in eeproms property. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct eeprom_cell. The eeprom_cell will be freed by the + * eeprom_cell_put(). + */ +struct eeprom_cell *of_eeprom_cell_get(struct device *dev, int index) +{ + struct device_node *cell_np; + + if (!dev || !dev->of_node) + return ERR_PTR(-EINVAL); + + cell_np = of_parse_phandle(dev->of_node, "eeproms", index); + if (!cell_np) + return ERR_PTR(-EPROBE_DEFER); + + return __eeprom_cell_get(cell_np, NULL, NULL, 0); +} +EXPORT_SYMBOL_GPL(of_eeprom_cell_get); + +/** + * of_eeprom_cell_get_byname(): Get eeprom cell of device form a given name + * + * @dev: Device that will be interacted with + * @name: eeprom name in eeprom-names property. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct eeprom_cell. The eeprom_cell will be freed by the + * eeprom_cell_put(). + */ +struct eeprom_cell *of_eeprom_cell_get_byname(struct device *dev, + const char *id) +{ + int index = 0; + + if (!dev || !dev->of_node) + return ERR_PTR(-EINVAL); + + if (id) + index = of_property_match_string(dev->of_node, + "eeprom-names", + id); + return of_eeprom_cell_get(dev, index); + +} +EXPORT_SYMBOL_GPL(of_eeprom_cell_get_byname); + +/** + * eeprom_cell_put(): Release previously allocated eeprom cell. + * + * @cell: Previously allocated eeprom cell by eeprom_cell_get() + * or of_eeprom_cell_get() or of_eeprom_cell_get_byname(). + */ +void eeprom_cell_put(struct eeprom_cell *cell) +{ + struct eeprom_device *eeprom = cell->eeprom; + + mutex_lock(&eeprom_mutex); + eeprom->users--; + mutex_unlock(&eeprom_mutex); + module_put(eeprom->owner); + kfree(cell); +} +EXPORT_SYMBOL_GPL(eeprom_cell_put); + +/** + * eeprom_cell_read(): Read a given eeprom cell + * + * @cell: eeprom cell to be read. + * @len: pointer to length of cell which will be populated on successful read. + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a char * bufffer. The buffer should be freed by the consumer with a + * kfree(). + */ +char *eeprom_cell_read(struct eeprom_cell *cell, ssize_t *len) +{ + struct eeprom_device *eeprom = cell->eeprom; + char *buf; + int rc, i, offset = 0; + + if (!eeprom || !eeprom->regmap) + return ERR_PTR(-EINVAL); + + buf = kzalloc(cell->size, GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < cell->nblocks; i++) { + rc = regmap_bulk_read(eeprom->regmap, cell->blocks[i].offset, + buf + offset, + cell->blocks[i].count); + + if (IS_ERR_VALUE(rc)) { + kfree(buf); + return ERR_PTR(rc); + } + offset += cell->blocks[i].count; + } + + *len = cell->size; + + return buf; +} +EXPORT_SYMBOL_GPL(eeprom_cell_read); + +/** + * eeprom_cell_write(): Write to a given eeprom cell + * + * @cell: eeprom cell to be written. + * @buf: Buffer to be written. + * @len: length of buffer to be written to eeprom cell. + * + * The return value will be an non zero on error or a zero on successful write. + */ +int eeprom_cell_write(struct eeprom_cell *cell, const char *buf, ssize_t len) +{ + struct eeprom_device *eeprom = cell->eeprom; + int i, rc, offset = 0; + + if (!eeprom || !eeprom->regmap || len != cell->size) + return -EINVAL; + + for (i = 0; i < cell->nblocks; i++) { + rc = regmap_bulk_write(eeprom->regmap, cell->blocks[i].offset, + buf + offset, + cell->blocks[i].count); + + if (IS_ERR_VALUE(rc)) + return rc; + + offset += cell->blocks[i].count; + } + + return len; +} +EXPORT_SYMBOL_GPL(eeprom_cell_write); + +static int eeprom_init(void) +{ + return class_register(&eeprom_class); +} + +static void eeprom_exit(void) +{ + class_unregister(&eeprom_class); +} + +subsys_initcall(eeprom_init); +module_exit(eeprom_exit); + +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org"); +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com"); +MODULE_DESCRIPTION("EEPROM Driver Core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/eeprom/qfprom.c b/drivers/eeprom/qfprom.c new file mode 100644 index 000000000000..8d5d4d889e5d --- /dev/null +++ b/drivers/eeprom/qfprom.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/eeprom-provider.h> + +static struct regmap_config qfprom_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, +}; + +static struct eeprom_config econfig = { + .name = "qfprom", +}; + +static int qfprom_remove(struct platform_device *pdev) +{ + struct eeprom_device *eeprom = platform_get_drvdata(pdev); + + return eeprom_unregister(eeprom); +} + +static int qfprom_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct device *dev = &pdev->dev; + struct eeprom_device *eeprom; + struct regmap *regmap; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + qfprom_regmap_config.max_register = resource_size(res) - 1; + + regmap = devm_regmap_init_mmio(dev, base, + &qfprom_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } + econfig.owner = THIS_MODULE; + econfig.dev = dev; + eeprom = eeprom_register(&econfig); + if (IS_ERR(eeprom)) + return PTR_ERR(eeprom); + + platform_set_drvdata(pdev, eeprom); + return 0; +} + +static const struct of_device_id qfprom_of_match[] = { + { .compatible = "qcom,qfprom"}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, qfprom_of_match); + +static struct platform_driver qfprom_driver = { + .probe = qfprom_probe, + .remove = qfprom_remove, + .driver = { + .name = "qcom,qfprom", + .of_match_table = qfprom_of_match, + }, +}; +module_platform_driver(qfprom_driver); +MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm QFPROM driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/eeprom/sunxi-sid.c b/drivers/eeprom/sunxi-sid.c new file mode 100644 index 000000000000..dd7238dd53d2 --- /dev/null +++ b/drivers/eeprom/sunxi-sid.c @@ -0,0 +1,136 @@ +/* + * Allwinner sunXi SoCs Security ID support. + * + * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl> + * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/device.h> +#include <linux/eeprom-provider.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> + +struct eeprom_sid { + void __iomem *membase; + struct eeprom_device *eeprom; +}; + +static struct eeprom_config econfig = { + .name = "sunix-sid", +}; + +/* We read the entire key, due to a 32 bit read alignment requirement. Since we + * want to return the requested byte, this results in somewhat slower code and + * uses 4 times more reads as needed but keeps code simpler. Since the SID is + * only very rarely probed, this is not really an issue. + */ +static int sunxi_sid_reg_read(void *context, + unsigned int offset, unsigned int *val) +{ + struct eeprom_sid *sid = context; + u32 sid_key; + + sid_key = ioread32be(sid->membase + round_down(offset, 4)); + sid_key >>= (offset % 4) * 8; + + *val = sid_key; + + return 0; +} + +static bool sunxi_sid_writeable_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static const struct of_device_id sunxi_sid_of_match[] = { + { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16}, + { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, + {/* sentinel */}, +}; +MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); + +static struct regmap_config sunxi_sid_regmap_config = { + .reg_bits = 32, + .val_bits = 8, + .reg_stride = 1, + .reg_read = sunxi_sid_reg_read, + .writeable_reg = sunxi_sid_writeable_reg, +}; + +static int sunxi_sid_probe(struct platform_device *pdev) +{ + const struct of_device_id *device; + struct eeprom_sid *sid; + struct resource *res; + struct eeprom_device *eeprom; + struct device *dev = &pdev->dev; + struct regmap *regmap; + + sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL); + if (!sid) + return -ENOMEM; + + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sid->membase = devm_ioremap_resource(dev, res); + if (IS_ERR(sid->membase)) + return PTR_ERR(sid->membase); + + device = of_match_device(sunxi_sid_of_match, dev); + if (!device) + return -ENODEV; + + sunxi_sid_regmap_config.max_register = (unsigned int)device->data - 1; + + regmap = devm_regmap_init(dev, NULL, + sid, &sunxi_sid_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + econfig.dev = dev; + econfig.owner = THIS_MODULE; + + eeprom = eeprom_register(&econfig); + if (IS_ERR(eeprom)) + return PTR_ERR(eeprom); + + platform_set_drvdata(pdev, eeprom); + + return 0; +} + +static int sunxi_sid_remove(struct platform_device *pdev) +{ + struct eeprom_device *eeprom = platform_get_drvdata(pdev); + + return eeprom_unregister(eeprom); +} + +static struct platform_driver sunxi_sid_driver = { + .probe = sunxi_sid_probe, + .remove = sunxi_sid_remove, + .driver = { + .name = "eeprom-sunxi-sid", + .of_match_table = sunxi_sid_of_match, + }, +}; +module_platform_driver(sunxi_sid_driver); + +MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>"); +MODULE_DESCRIPTION("Allwinner sunxi security id driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 6a1f7de6fa54..e4c01ab046f7 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -93,4 +93,11 @@ config EXTCON_SM5502 Silicon Mitus SM5502. The SM5502 is a USB port accessory detector and switch. +config EXTCON_USB_GPIO + tristate "USB GPIO extcon support" + depends on GPIOLIB + help + Say Y here to enable GPIO based USB cable detection extcon support. + Used typically if GPIO is used for USB ID pin detection. + endif # MULTISTATE_SWITCH diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 0370b42e5a27..6a08a98dc069 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o +obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c new file mode 100644 index 000000000000..439ca9970db9 --- /dev/null +++ b/drivers/extcon/extcon-usb-gpio.c @@ -0,0 +1,308 @@ +/** + * drivers/extcon/extcon-usb-gpio.c - USB GPIO extcon driver + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com + * Author: Roger Quadros <rogerq@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/extcon.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define USB_GPIO_DEBOUNCE_MS 20 /* ms */ + +struct usb_extcon_info { + struct device *dev; + struct extcon_dev *edev; + + struct gpio_desc *id_gpiod; + struct gpio_desc *vbus_gpiod; + int id_irq; + int vbus_irq; + + unsigned long debounce_jiffies; + struct delayed_work wq_detcable; +}; + +/* List of detectable cables */ +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + + EXTCON_CABLE_END, +}; + +static const char *usb_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-HOST", + NULL, +}; + +/* + * "USB" = VBUS and "USB-HOST" = !ID, so we have: + * + * State | ID | VBUS + * ---------------------------------------- + * [1] USB | H | H + * [2] none | H | L + * [3] USB & USB-HOST | L | H + * [4] USB-HOST | L | L + * + * In case we have only one of these signals: + * - VBUS only - we want to distinguish between [1] and [2], so ID is always 1. + * - ID only - we want to distinguish between [1] and [4], so VBUS = ID. + */ + +static void usb_extcon_detect_cable(struct work_struct *work) +{ + int id; + int vbus; + struct usb_extcon_info *info = container_of(to_delayed_work(work), + struct usb_extcon_info, + wq_detcable); + + /* check ID and VBUS and update cable state */ + + id = info->id_gpiod ? + gpiod_get_value_cansleep(info->id_gpiod) : 1; + + vbus = info->vbus_gpiod ? + gpiod_get_value_cansleep(info->vbus_gpiod) : id; + + /* at first we clean states which are no longer active */ + if (id) + extcon_set_cable_state(info->edev, + usb_extcon_cable[EXTCON_CABLE_USB_HOST], false); + if (!vbus) + extcon_set_cable_state(info->edev, + usb_extcon_cable[EXTCON_CABLE_USB], false); + + extcon_set_cable_state(info->edev, + usb_extcon_cable[EXTCON_CABLE_USB_HOST], !id); + extcon_set_cable_state(info->edev, + usb_extcon_cable[EXTCON_CABLE_USB], vbus); +} + +static irqreturn_t usb_irq_handler(int irq, void *dev_id) +{ + struct usb_extcon_info *info = dev_id; + + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + info->debounce_jiffies); + + return IRQ_HANDLED; +} + +static int usb_extcon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct usb_extcon_info *info; + u32 debounce; + int ret; + + if (!np) + return -EINVAL; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = dev; + + ret = of_property_read_u32(np, "debounce", &debounce); + if (ret < 0) + debounce = USB_GPIO_DEBOUNCE_MS; + + info->id_gpiod = devm_gpiod_get_optional(&pdev->dev, "id"); + info->vbus_gpiod = devm_gpiod_get_optional(&pdev->dev, "vbus"); + + if (!info->id_gpiod && !info->vbus_gpiod) { + dev_err(dev, "failed to get gpios\n"); + return -ENODEV; + } + + info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(dev, "failed to allocate extcon device\n"); + return -ENOMEM; + } + + ret = devm_extcon_dev_register(dev, info->edev); + if (ret < 0) { + dev_err(dev, "failed to register extcon device\n"); + return ret; + } + + if (info->id_gpiod) + ret = gpiod_set_debounce(info->id_gpiod, debounce * 1000); + if (!ret && info->vbus_gpiod) { + ret = gpiod_set_debounce(info->vbus_gpiod, debounce * 1000); + if (ret < 0 && info->id_gpiod) + gpiod_set_debounce(info->vbus_gpiod, 0); + } + if (ret < 0) + info->debounce_jiffies = msecs_to_jiffies(debounce); + + INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable); + + if (info->id_gpiod) { + info->id_irq = gpiod_to_irq(info->id_gpiod); + if (info->id_irq < 0) { + dev_err(dev, "failed to get ID IRQ\n"); + return info->id_irq; + } + ret = devm_request_threaded_irq(dev, info->id_irq, NULL, + usb_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request handler for ID IRQ\n"); + return ret; + } + } + if (info->vbus_gpiod) { + info->vbus_irq = gpiod_to_irq(info->vbus_gpiod); + if (info->vbus_irq < 0) { + dev_err(dev, "failed to get VBUS IRQ\n"); + return info->vbus_irq; + } + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL, + usb_irq_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdev->name, info); + if (ret < 0) { + dev_err(dev, "failed to request handler for VBUS IRQ\n"); + return ret; + } + } + + platform_set_drvdata(pdev, info); + device_init_wakeup(dev, 1); + + /* Perform initial detection */ + usb_extcon_detect_cable(&info->wq_detcable.work); + + return 0; +} + +static int usb_extcon_remove(struct platform_device *pdev) +{ + struct usb_extcon_info *info = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&info->wq_detcable); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int usb_extcon_suspend(struct device *dev) +{ + struct usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) { + if (info->id_gpiod) { + ret = enable_irq_wake(info->id_irq); + if (ret) + return ret; + } + if (info->vbus_gpiod) { + ret = enable_irq_wake(info->vbus_irq); + if (ret) + goto err; + } + } + + /* + * We don't want to process any IRQs after this point + * as GPIOs used behind I2C subsystem might not be + * accessible until resume completes. So disable IRQ. + */ + if (info->id_gpiod) + disable_irq(info->id_irq); + if (info->vbus_gpiod) + disable_irq(info->vbus_irq); + + return ret; + +err: + if (info->id_gpiod) + disable_irq_wake(info->id_irq); + return ret; +} + +static int usb_extcon_resume(struct device *dev) +{ + struct usb_extcon_info *info = dev_get_drvdata(dev); + int ret = 0; + + if (device_may_wakeup(dev)) { + if (info->id_gpiod) { + ret = disable_irq_wake(info->id_irq); + if (ret) + return ret; + } + if (info->vbus_gpiod) { + ret = disable_irq_wake(info->vbus_irq); + if (ret) + goto err; + } + } + + if (info->id_gpiod) + enable_irq(info->id_irq); + if (info->vbus_gpiod) + enable_irq(info->vbus_irq); + + return ret; + +err: + if (info->id_gpiod) + enable_irq_wake(info->id_irq); + return ret; +} +#endif + +static SIMPLE_DEV_PM_OPS(usb_extcon_pm_ops, + usb_extcon_suspend, usb_extcon_resume); + +static struct of_device_id usb_extcon_dt_match[] = { + { .compatible = "linux,extcon-usb-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, usb_extcon_dt_match); + +static struct platform_driver usb_extcon_driver = { + .probe = usb_extcon_probe, + .remove = usb_extcon_remove, + .driver = { + .name = "extcon-usb-gpio", + .pm = &usb_extcon_pm_ops, + .of_match_table = usb_extcon_dt_match, + }, +}; + +module_platform_driver(usb_extcon_driver); + +MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>"); +MODULE_DESCRIPTION("USB GPIO extcon driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 41983883cef4..6517132e5d8b 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -132,6 +132,10 @@ config ISCSI_IBFT detect iSCSI boot parameters dynamically during system boot, say Y. Otherwise, say N. +config QCOM_SCM + bool + depends on ARM || ARM64 + source "drivers/firmware/google/Kconfig" source "drivers/firmware/efi/Kconfig" diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 5373dc5b6011..3fdd3912709a 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_DMIID) += dmi-id.o obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o +obj-$(CONFIG_QCOM_SCM) += qcom_scm.o +CFLAGS_qcom_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1) obj-$(CONFIG_GOOGLE_FIRMWARE) += google/ obj-$(CONFIG_EFI) += efi/ diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c new file mode 100644 index 000000000000..994b50fd997c --- /dev/null +++ b/drivers/firmware/qcom_scm.c @@ -0,0 +1,494 @@ +/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/qcom_scm.h> + +#include <asm/outercache.h> +#include <asm/cacheflush.h> + + +#define QCOM_SCM_ENOMEM -5 +#define QCOM_SCM_EOPNOTSUPP -4 +#define QCOM_SCM_EINVAL_ADDR -3 +#define QCOM_SCM_EINVAL_ARG -2 +#define QCOM_SCM_ERROR -1 +#define QCOM_SCM_INTERRUPTED 1 + +#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00 +#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01 +#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08 +#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20 + +#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04 +#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02 +#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10 +#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40 + +struct qcom_scm_entry { + int flag; + void *entry; +}; + +static struct qcom_scm_entry qcom_scm_wb[] = { + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 }, + { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 }, +}; + +static DEFINE_MUTEX(qcom_scm_lock); + +/** + * struct qcom_scm_command - one SCM command buffer + * @len: total available memory for command and response + * @buf_offset: start of command buffer + * @resp_hdr_offset: start of response buffer + * @id: command to be executed + * @buf: buffer returned from qcom_scm_get_command_buffer() + * + * An SCM command is laid out in memory as follows: + * + * ------------------- <--- struct qcom_scm_command + * | command header | + * ------------------- <--- qcom_scm_get_command_buffer() + * | command buffer | + * ------------------- <--- struct qcom_scm_response and + * | response header | qcom_scm_command_to_response() + * ------------------- <--- qcom_scm_get_response_buffer() + * | response buffer | + * ------------------- + * + * There can be arbitrary padding between the headers and buffers so + * you should always use the appropriate qcom_scm_get_*_buffer() routines + * to access the buffers in a safe manner. + */ +struct qcom_scm_command { + __le32 len; + __le32 buf_offset; + __le32 resp_hdr_offset; + __le32 id; + __le32 buf[0]; +}; + +/** + * struct qcom_scm_response - one SCM response buffer + * @len: total available memory for response + * @buf_offset: start of response data relative to start of qcom_scm_response + * @is_complete: indicates if the command has finished processing + */ +struct qcom_scm_response { + __le32 len; + __le32 buf_offset; + __le32 is_complete; +}; + +/** + * alloc_qcom_scm_command() - Allocate an SCM command + * @cmd_size: size of the command buffer + * @resp_size: size of the response buffer + * + * Allocate an SCM command, including enough room for the command + * and response headers as well as the command and response buffers. + * + * Returns a valid &qcom_scm_command on success or %NULL if the allocation fails. + */ +static struct qcom_scm_command *alloc_qcom_scm_command(size_t cmd_size, size_t resp_size) +{ + struct qcom_scm_command *cmd; + size_t len = sizeof(*cmd) + sizeof(struct qcom_scm_response) + cmd_size + + resp_size; + u32 offset; + + cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL); + if (cmd) { + cmd->len = cpu_to_le32(len); + offset = offsetof(struct qcom_scm_command, buf); + cmd->buf_offset = cpu_to_le32(offset); + cmd->resp_hdr_offset = cpu_to_le32(offset + cmd_size); + } + return cmd; +} + +/** + * free_qcom_scm_command() - Free an SCM command + * @cmd: command to free + * + * Free an SCM command. + */ +static inline void free_qcom_scm_command(struct qcom_scm_command *cmd) +{ + kfree(cmd); +} + +/** + * qcom_scm_command_to_response() - Get a pointer to a qcom_scm_response + * @cmd: command + * + * Returns a pointer to a response for a command. + */ +static inline struct qcom_scm_response *qcom_scm_command_to_response( + const struct qcom_scm_command *cmd) +{ + return (void *)cmd + le32_to_cpu(cmd->resp_hdr_offset); +} + +/** + * qcom_scm_get_command_buffer() - Get a pointer to a command buffer + * @cmd: command + * + * Returns a pointer to the command buffer of a command. + */ +static inline void *qcom_scm_get_command_buffer(const struct qcom_scm_command *cmd) +{ + return (void *)cmd->buf; +} + +/** + * qcom_scm_get_response_buffer() - Get a pointer to a response buffer + * @rsp: response + * + * Returns a pointer to a response buffer of a response. + */ +static inline void *qcom_scm_get_response_buffer(const struct qcom_scm_response *rsp) +{ + return (void *)rsp + le32_to_cpu(rsp->buf_offset); +} + +static int qcom_scm_remap_error(int err) +{ + pr_err("qcom_scm_call failed with error code %d\n", err); + switch (err) { + case QCOM_SCM_ERROR: + return -EIO; + case QCOM_SCM_EINVAL_ADDR: + case QCOM_SCM_EINVAL_ARG: + return -EINVAL; + case QCOM_SCM_EOPNOTSUPP: + return -EOPNOTSUPP; + case QCOM_SCM_ENOMEM: + return -ENOMEM; + } + return -EINVAL; +} + +static u32 smc(u32 cmd_addr) +{ + int context_id; + register u32 r0 asm("r0") = 1; + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = cmd_addr; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + return r0; +} + +static int __qcom_scm_call(const struct qcom_scm_command *cmd) +{ + int ret; + u32 cmd_addr = virt_to_phys(cmd); + + /* + * Flush the command buffer so that the secure world sees + * the correct data. + */ + __cpuc_flush_dcache_area((void *)cmd, cmd->len); + outer_flush_range(cmd_addr, cmd_addr + cmd->len); + + ret = smc(cmd_addr); + if (ret < 0) + ret = qcom_scm_remap_error(ret); + + return ret; +} + +static void qcom_scm_inv_range(unsigned long start, unsigned long end) +{ + u32 cacheline_size, ctr; + + asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); + cacheline_size = 4 << ((ctr >> 16) & 0xf); + + start = round_down(start, cacheline_size); + end = round_up(end, cacheline_size); + outer_inv_range(start, end); + while (start < end) { + asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) + : "memory"); + start += cacheline_size; + } + dsb(); + isb(); +} + +/** + * qcom_scm_call() - Send an SCM command + * @svc_id: service identifier + * @cmd_id: command identifier + * @cmd_buf: command buffer + * @cmd_len: length of the command buffer + * @resp_buf: response buffer + * @resp_len: length of the response buffer + * + * Sends a command to the SCM and waits for the command to finish processing. + * + * A note on cache maintenance: + * Note that any buffers that are expected to be accessed by the secure world + * must be flushed before invoking qcom_scm_call and invalidated in the cache + * immediately after qcom_scm_call returns. Cache maintenance on the command + * and response buffers is taken care of by qcom_scm_call; however, callers are + * responsible for any other cached buffers passed over to the secure world. + */ +static int qcom_scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, + size_t cmd_len, void *resp_buf, size_t resp_len) +{ + int ret; + struct qcom_scm_command *cmd; + struct qcom_scm_response *rsp; + unsigned long start, end; + + cmd = alloc_qcom_scm_command(cmd_len, resp_len); + if (!cmd) + return -ENOMEM; + + cmd->id = cpu_to_le32((svc_id << 10) | cmd_id); + if (cmd_buf) + memcpy(qcom_scm_get_command_buffer(cmd), cmd_buf, cmd_len); + + mutex_lock(&qcom_scm_lock); + ret = __qcom_scm_call(cmd); + mutex_unlock(&qcom_scm_lock); + if (ret) + goto out; + + rsp = qcom_scm_command_to_response(cmd); + start = (unsigned long)rsp; + + do { + qcom_scm_inv_range(start, start + sizeof(*rsp)); + } while (!rsp->is_complete); + + end = (unsigned long)qcom_scm_get_response_buffer(rsp) + resp_len; + qcom_scm_inv_range(start, end); + + if (resp_buf) + memcpy(resp_buf, qcom_scm_get_response_buffer(rsp), resp_len); +out: + free_qcom_scm_command(cmd); + return ret; +} + +#define SCM_CLASS_REGISTER (0x2 << 8) +#define SCM_MASK_IRQS BIT(5) +#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \ + SCM_CLASS_REGISTER | \ + SCM_MASK_IRQS | \ + (n & 0xf)) + +/** + * qcom_scm_call_atomic1() - Send an atomic SCM command with one argument + * @svc_id: service identifier + * @cmd_id: command identifier + * @arg1: first argument + * + * This shall only be used with commands that are guaranteed to be + * uninterruptable, atomic and SMP safe. + */ +static s32 qcom_scm_call_atomic1(u32 svc, u32 cmd, u32 arg1) +{ + int context_id; + + register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1); + register u32 r1 asm("r1") = (u32)&context_id; + register u32 r2 asm("r2") = arg1; + + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r0") + __asmeq("%2", "r1") + __asmeq("%3", "r2") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0) + : "r" (r0), "r" (r1), "r" (r2) + : "r3"); + return r0; +} + +u32 qcom_scm_get_version(void) +{ + int context_id; + static u32 version = -1; + register u32 r0 asm("r0"); + register u32 r1 asm("r1"); + + if (version != -1) + return version; + + mutex_lock(&qcom_scm_lock); + + r0 = 0x1 << 8; + r1 = (u32)&context_id; + do { + asm volatile( + __asmeq("%0", "r0") + __asmeq("%1", "r1") + __asmeq("%2", "r0") + __asmeq("%3", "r1") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + "smc #0 @ switch to secure world\n" + : "=r" (r0), "=r" (r1) + : "r" (r0), "r" (r1) + : "r2", "r3"); + } while (r0 == QCOM_SCM_INTERRUPTED); + + version = r1; + mutex_unlock(&qcom_scm_lock); + + return version; +} +EXPORT_SYMBOL(qcom_scm_get_version); + +#define QCOM_SCM_SVC_BOOT 0x1 +#define QCOM_SCM_BOOT_ADDR 0x1 +/* + * Set the cold/warm boot address for one of the CPU cores. + */ +static int qcom_scm_set_boot_addr(u32 addr, int flags) +{ + struct { + __le32 flags; + __le32 addr; + } cmd; + + cmd.addr = cpu_to_le32(addr); + cmd.flags = cpu_to_le32(flags); + return qcom_scm_call(QCOM_SCM_SVC_BOOT, QCOM_SCM_BOOT_ADDR, + &cmd, sizeof(cmd), NULL, 0); +} + +/** + * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the cold boot address of the cpus. Any cpu outside the supported + * range would be removed from the cpu present mask. + */ +int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +{ + int flags = 0; + int cpu; + int scm_cb_flags[] = { + QCOM_SCM_FLAG_COLDBOOT_CPU0, + QCOM_SCM_FLAG_COLDBOOT_CPU1, + QCOM_SCM_FLAG_COLDBOOT_CPU2, + QCOM_SCM_FLAG_COLDBOOT_CPU3, + }; + + if (!cpus || (cpus && cpumask_empty(cpus))) + return -EINVAL; + + for_each_cpu(cpu, cpus) { + if (cpu < ARRAY_SIZE(scm_cb_flags)) + flags |= scm_cb_flags[cpu]; + else + set_cpu_present(cpu, false); + } + + return qcom_scm_set_boot_addr(virt_to_phys(entry), flags); +} +EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); + +/** + * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus + * @entry: Entry point function for the cpus + * @cpus: The cpumask of cpus that will use the entry point + * + * Set the Linux entry point for the SCM to transfer control to when coming + * out of a power down. CPU power down may be executed on cpuidle or hotplug. + */ +int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus) +{ + int ret; + int flags = 0; + int cpu; + + /* + * Reassign only if we are switching from hotplug entry point + * to cpuidle entry point or vice versa. + */ + for_each_cpu(cpu, cpus) { + if (entry == qcom_scm_wb[cpu].entry) + continue; + flags |= qcom_scm_wb[cpu].flag; + } + + /* No change in entry function */ + if (!flags) + return 0; + + ret = qcom_scm_set_boot_addr(virt_to_phys(entry), flags); + if (!ret) { + for_each_cpu(cpu, cpus) + qcom_scm_wb[cpu].entry = entry; + } + + return ret; +} +EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr); + +#define QCOM_SCM_CMD_TERMINATE_PC 0x2 +#define QCOM_SCM_FLUSH_FLAG_MASK 0x3 + +/** + * qcom_scm_cpu_power_down() - Power down the cpu + * @flags - Flags to flush cache + * + * This is an end point to power down cpu. If there was a pending interrupt, + * the control would return from this function, otherwise, the cpu jumps to the + * warm boot entry point set for this cpu upon reset. + */ +void qcom_scm_cpu_power_down(u32 flags) +{ + qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC, + flags & QCOM_SCM_FLUSH_FLAG_MASK); +} +EXPORT_SYMBOL(qcom_scm_cpu_power_down); diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 1ae4e547b419..ba772c400a0e 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -59,6 +59,17 @@ config FSL_PAMU PAMU can authorize memory access, remap the memory address, and remap I/O transaction types. +config QCOM_IOMMU_V0 + bool "Qualcomm IOMMU v0 Support" + depends on ARCH_QCOM + select IOMMU_API + help + Support for the IOMMUs found on certain Qualcomm SOCs. + These IOMMUs allow virtualization of the address space used by most + cores within the multimedia subsystem. + + If unsure, say N here. + # MSM IOMMU support config MSM_IOMMU bool "MSM IOMMU Support" diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile index 080ffab4ed1c..a8a4d80a8af1 100644 --- a/drivers/iommu/Makefile +++ b/drivers/iommu/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_IOMMU_IO_PGTABLE_LPAE) += io-pgtable-arm.o obj-$(CONFIG_IOMMU_IOVA) += iova.o obj-$(CONFIG_OF_IOMMU) += of_iommu.o obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o +obj-$(CONFIG_QCOM_IOMMU_V0) += qcom_iommu_v0.o obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o obj-$(CONFIG_AMD_IOMMU_V2) += amd_iommu_v2.o obj-$(CONFIG_ARM_SMMU) += arm-smmu.o diff --git a/drivers/iommu/msm_iommu.c b/drivers/iommu/msm_iommu.c index e1b05379ca0e..19c5e0141aaa 100644 --- a/drivers/iommu/msm_iommu.c +++ b/drivers/iommu/msm_iommu.c @@ -422,12 +422,12 @@ static int msm_iommu_map(struct iommu_domain *domain, unsigned long va, int i = 0; for (i = 0; i < 16; i++) *(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION | - FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT | + FL_AP1 | FL_AP0 | FL_TYPE_SECT | FL_SHARED | FL_NG | pgprot; } if (len == SZ_1M) - *fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE | FL_NG | + *fl_pte = (pa & 0xFFF00000) | FL_AP1 | FL_AP0 | FL_NG | FL_TYPE_SECT | FL_SHARED | pgprot; /* Need a 2nd level table */ diff --git a/drivers/iommu/msm_iommu_hw-8xxx.h b/drivers/iommu/msm_iommu_hw-8xxx.h index fc160101dead..84ba573927d1 100644 --- a/drivers/iommu/msm_iommu_hw-8xxx.h +++ b/drivers/iommu/msm_iommu_hw-8xxx.h @@ -61,8 +61,9 @@ do { \ #define FL_TYPE_TABLE (1 << 0) #define FL_TYPE_SECT (2 << 0) #define FL_SUPERSECTION (1 << 18) -#define FL_AP_WRITE (1 << 10) -#define FL_AP_READ (1 << 11) +#define FL_AP0 (1 << 10) +#define FL_AP1 (1 << 11) +#define FL_AP2 (1 << 15) #define FL_SHARED (1 << 16) #define FL_BUFFERABLE (1 << 2) #define FL_CACHEABLE (1 << 3) @@ -77,6 +78,7 @@ do { \ #define SL_TYPE_SMALL (2 << 0) #define SL_AP0 (1 << 4) #define SL_AP1 (2 << 4) +#define SL_AP2 (1 << 9) #define SL_SHARED (1 << 10) #define SL_BUFFERABLE (1 << 2) #define SL_CACHEABLE (1 << 3) diff --git a/drivers/iommu/qcom_iommu_v0.c b/drivers/iommu/qcom_iommu_v0.c new file mode 100644 index 000000000000..190f41e7f7c6 --- /dev/null +++ b/drivers/iommu/qcom_iommu_v0.c @@ -0,0 +1,1223 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (C) 2014 Red Hat + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + + +/* NOTE: originally based on msm_iommu non-DT driver for same hw + * but as the structure of the driver changes considerably for DT + * it seemed easier to not try to support old platforms with the + * same driver. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/iommu.h> +#include <linux/clk.h> + +#include <asm/cacheflush.h> +#include <asm/sizes.h> + +#include "msm_iommu_hw-8xxx.h" +#include "qcom_iommu_v0.h" + +#define MRC(reg, processor, op1, crn, crm, op2) \ +__asm__ __volatile__ ( \ +" mrc " #processor "," #op1 ", %0," #crn "," #crm "," #op2 "\n" \ +: "=r" (reg)) + +#define RCP15_PRRR(reg) MRC(reg, p15, 0, c10, c2, 0) +#define RCP15_NMRR(reg) MRC(reg, p15, 0, c10, c2, 1) + +/* bitmap of the page sizes currently supported */ +#define QCOM_IOMMU_PGSIZES (SZ_4K | SZ_64K | SZ_1M | SZ_16M) + +static int qcom_iommu_tex_class[4]; + +// TODO any good reason for global lock vs per-iommu lock? +static DEFINE_MUTEX(qcom_iommu_lock); +static LIST_HEAD(qcom_iommu_devices); + +/* Note that a single iommu_domain can, for devices sitting behind + * more than one IOMMU (ie. one per AXI interface) will have more + * than one iommu in the iommu_list. But all are programmed to + * point at the same pagetables so from client device perspective + * they act as a single IOMMU. + */ +struct qcom_domain_priv { + unsigned long *pgtable; + struct iommu_domain *domain; + struct list_head iommu_list; /* list of attached 'struct qcom_iommu' */ +}; + +static int __enable_clocks(struct qcom_iommu *iommu) +{ + int ret; + + ret = clk_prepare_enable(iommu->pclk); + if (ret) + goto fail; + + if (iommu->clk) { + ret = clk_prepare_enable(iommu->clk); + if (ret) + clk_disable_unprepare(iommu->pclk); + } +fail: + return ret; +} + +static void __disable_clocks(struct qcom_iommu *iommu) +{ + if (iommu->clk) + clk_disable_unprepare(iommu->clk); + clk_disable_unprepare(iommu->pclk); +} + +static void __flush_range(struct qcom_iommu *iommu, + unsigned long *start, unsigned long *end) +{ + dmac_flush_range(start, end); +} + +static int __flush_iotlb_va(struct qcom_domain_priv *priv, unsigned int va) +{ + struct qcom_iommu *iommu; + int ret = 0; + + list_for_each_entry(iommu, &priv->iommu_list, dom_node) { + struct qcom_iommu_ctx *iommu_ctx; + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) { + int ctx = iommu_ctx->num; + uint32_t asid; + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + asid = GET_CONTEXTIDR_ASID(iommu->base, ctx); + + SET_TLBIVA(iommu->base, ctx, asid | (va & TLBIVA_VA)); + mb(); + + __disable_clocks(iommu); + } + } + +fail: + return ret; +} + +static int __flush_iotlb(struct qcom_domain_priv *priv) +{ + struct qcom_iommu *iommu; + int ret = 0; + +#ifndef CONFIG_IOMMU_PGTABLES_L2 + unsigned long *fl_table = priv->pgtable; + int i; + + list_for_each_entry(iommu, &priv->iommu_list, dom_node) { + + __flush_range(iommu, fl_table, fl_table + SZ_16K); + + for (i = 0; i < NUM_FL_PTE; i++) { + if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) { + void *sl_table = __va(fl_table[i] & + FL_BASE_MASK); + __flush_range(iommu, sl_table, sl_table + SZ_4K); + } + } + + /* + * Only need to flush once, all iommu's attached + * to the domain use common set of pagetables: + */ + break; + } +#endif + + list_for_each_entry(iommu, &priv->iommu_list, dom_node) { + struct qcom_iommu_ctx *iommu_ctx; + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) { + int ctx = iommu_ctx->num; + uint32_t asid; + + asid = GET_CONTEXTIDR_ASID(iommu->base, ctx); + + SET_TLBIASID(iommu->base, ctx, asid); + mb(); + } + __disable_clocks(iommu); + } + +fail: + return ret; +} + +static void __reset_context(struct qcom_iommu *iommu, int ctx) +{ + void __iomem *base = iommu->base; + + SET_BPRCOSH(base, ctx, 0); + SET_BPRCISH(base, ctx, 0); + SET_BPRCNSH(base, ctx, 0); + SET_BPSHCFG(base, ctx, 0); + SET_BPMTCFG(base, ctx, 0); + SET_ACTLR(base, ctx, 0); + SET_SCTLR(base, ctx, 0); + SET_FSRRESTORE(base, ctx, 0); + SET_TTBR0(base, ctx, 0); + SET_TTBR1(base, ctx, 0); + SET_TTBCR(base, ctx, 0); + SET_BFBCR(base, ctx, 0); + SET_PAR(base, ctx, 0); + SET_FAR(base, ctx, 0); + SET_TLBFLPTER(base, ctx, 0); + SET_TLBSLPTER(base, ctx, 0); + SET_TLBLKCR(base, ctx, 0); + SET_PRRR(base, ctx, 0); + SET_NMRR(base, ctx, 0); + SET_RESUME(base, ctx, 1); + mb(); +} + +static void __reset_iommu(struct qcom_iommu *iommu) +{ + void __iomem *base = iommu->base; + int ctx; + + SET_RPUE(base, 0); + SET_RPUEIE(base, 0); + SET_ESRRESTORE(base, 0); + SET_TBE(base, 0); + SET_CR(base, 0); + SET_SPDMBE(base, 0); + SET_TESTBUSCR(base, 0); + SET_TLBRSW(base, 0); + SET_GLOBAL_TLBIALL(base, 0); + SET_RPU_ACR(base, 0); + SET_TLBLKCRWE(base, 1); + + for (ctx = 0; ctx < iommu->ncb; ctx++) { + SET_BPRCOSH(base, ctx, 0); + SET_BPRCISH(base, ctx, 0); + SET_BPRCNSH(base, ctx, 0); + SET_BPSHCFG(base, ctx, 0); + SET_BPMTCFG(base, ctx, 0); + SET_ACTLR(base, ctx, 0); + SET_SCTLR(base, ctx, 0); + SET_FSRRESTORE(base, ctx, 0); + SET_TTBR0(base, ctx, 0); + SET_TTBR1(base, ctx, 0); + SET_TTBCR(base, ctx, 0); + SET_BFBCR(base, ctx, 0); + SET_PAR(base, ctx, 0); + SET_FAR(base, ctx, 0); + SET_TLBFLPTER(base, ctx, 0); + SET_TLBSLPTER(base, ctx, 0); + SET_TLBLKCR(base, ctx, 0); + SET_CTX_TLBIALL(base, ctx, 0); + SET_TLBIVA(base, ctx, 0); + SET_PRRR(base, ctx, 0); + SET_NMRR(base, ctx, 0); + SET_CONTEXTIDR(base, ctx, 0); + } + mb(); +} + + +static void __program_context(struct qcom_domain_priv *priv, + struct qcom_iommu *iommu, int ctx) +{ + void __iomem *base = iommu->base; + phys_addr_t pgtable = __pa(priv->pgtable); + unsigned int prrr, nmrr; + bool found; + int i, j; + + __reset_context(iommu, ctx); + + /* Set up HTW mode */ + /* TLB miss configuration: perform HTW on miss */ + SET_TLBMCFG(base, ctx, 0x3); + + /* V2P configuration: HTW for access */ + SET_V2PCFG(base, ctx, 0x3); + + SET_TTBCR(base, ctx, iommu->ttbr_split); + SET_TTBR0_PA(base, ctx, (pgtable >> TTBR0_PA_SHIFT)); + if (iommu->ttbr_split) + SET_TTBR1_PA(base, ctx, (pgtable >> TTBR1_PA_SHIFT)); + + /* Enable context fault interrupt */ + SET_CFEIE(base, ctx, 1); + + /* Stall access on a context fault and let the handler deal with it */ + SET_CFCFG(base, ctx, 1); + + /* Redirect all cacheable requests to L2 slave port. */ + SET_RCISH(base, ctx, 1); + SET_RCOSH(base, ctx, 1); + SET_RCNSH(base, ctx, 1); + + /* Turn on TEX Remap */ + SET_TRE(base, ctx, 1); + + /* Set TEX remap attributes */ + RCP15_PRRR(prrr); + RCP15_NMRR(nmrr); + SET_PRRR(base, ctx, prrr); + SET_NMRR(base, ctx, nmrr); + + /* Turn on BFB prefetch */ + SET_BFBDFE(base, ctx, 1); + +#ifdef CONFIG_IOMMU_PGTABLES_L2 + /* Configure page tables as inner-cacheable and shareable to reduce + * the TLB miss penalty. + */ + SET_TTBR0_SH(base, ctx, 1); + SET_TTBR1_SH(base, ctx, 1); + + SET_TTBR0_NOS(base, ctx, 1); + SET_TTBR1_NOS(base, ctx, 1); + + SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */ + SET_TTBR0_IRGNL(base, ctx, 1); + + SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */ + SET_TTBR1_IRGNL(base, ctx, 1); + + SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */ + SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */ +#endif + + /* Find if this page table is used elsewhere, and re-use ASID */ + found = false; + for (i = 0; i < iommu->ncb; i++) { + if (i == ctx) + continue; + + if (GET_TTBR0_PA(base, i) == (pgtable >> TTBR0_PA_SHIFT)) { + SET_CONTEXTIDR_ASID(base, ctx, GET_CONTEXTIDR_ASID(base, i)); + found = true; + break; + } + } + + /* If page table is new, find an unused ASID */ + if (!found) { + for (i = 0; i < iommu->ncb; i++) { + found = false; + for (j = 0; j < iommu->ncb; j++) { + if (j != ctx) + continue; + if (GET_CONTEXTIDR_ASID(base, j) == i) + found = true; + } + + if (!found) { + SET_CONTEXTIDR_ASID(base, ctx, i); + break; + } + } + BUG_ON(found); + } + + /* Enable the MMU */ + SET_M(base, ctx, 1); + mb(); +} + +static int qcom_iommu_domain_init(struct iommu_domain *domain) +{ + struct qcom_domain_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL); + + if (!priv) + goto fail_nomem; + + INIT_LIST_HEAD(&priv->iommu_list); + priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL, + get_order(SZ_16K)); + + if (!priv->pgtable) + goto fail_nomem; + + memset(priv->pgtable, 0, SZ_16K); + domain->priv = priv; + priv->domain = domain; + +//XXX I think not needed? + dmac_flush_range(priv->pgtable, priv->pgtable + NUM_FL_PTE); + + domain->geometry.aperture_start = 0; + domain->geometry.aperture_end = (1ULL << 32) - 1; + domain->geometry.force_aperture = true; + + return 0; + +fail_nomem: + kfree(priv); + return -ENOMEM; +} + +static void qcom_iommu_domain_destroy(struct iommu_domain *domain) +{ + struct qcom_domain_priv *priv; + unsigned long *fl_table; + int i; + + mutex_lock(&qcom_iommu_lock); + priv = domain->priv; + domain->priv = NULL; + + if (priv) { + fl_table = priv->pgtable; + + for (i = 0; i < NUM_FL_PTE; i++) + if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) + free_page((unsigned long) __va(((fl_table[i]) & + FL_BASE_MASK))); + + free_pages((unsigned long)priv->pgtable, get_order(SZ_16K)); + priv->pgtable = NULL; + } + + kfree(priv); + mutex_unlock(&qcom_iommu_lock); +} + +static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev) +{ + struct qcom_domain_priv *priv = domain->priv; + struct qcom_iommu *iommu; + struct qcom_iommu_ctx *iommu_ctx = NULL; + int ret = 0; + bool found = false; + + if (!priv) + return -EINVAL; + + mutex_lock(&qcom_iommu_lock); + list_for_each_entry(iommu, &qcom_iommu_devices, dev_node) { + iommu_ctx = list_first_entry(&iommu->ctx_list, + struct qcom_iommu_ctx, node); + + if (iommu_ctx->of_node == dev->of_node) { + found = true; + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + /* we found a matching device, attach all it's contexts: */ + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) + __program_context(priv, iommu, iommu_ctx->num); + + __disable_clocks(iommu); + + // TODO check for double attaches, etc.. + + list_add_tail(&iommu->dom_node, &priv->iommu_list); + iommu->domain = domain; + } + } + + if (!found) { + ret = -ENXIO; + goto fail; + } + + // TODO might want to get_device(iommu->dev) unless iommu framework + // does this somewhere for us? + + ret = __flush_iotlb(priv); + +fail: + if (ret) { + // TODO make sure we completely detach.. + } + mutex_unlock(&qcom_iommu_lock); + return ret; +} + +static void qcom_iommu_detach_dev(struct iommu_domain *domain, + struct device *dev) +{ + struct qcom_domain_priv *priv = domain->priv; + struct qcom_iommu *iommu; + struct qcom_iommu_ctx *iommu_ctx; + int ret; + + if (!priv) + return; + + mutex_lock(&qcom_iommu_lock); + + ret = __flush_iotlb(priv); + if (ret) + goto fail; + + while (!list_empty(&priv->iommu_list)) { + iommu = list_first_entry(&priv->iommu_list, + struct qcom_iommu, dom_node); + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + /* reset all contexts: */ + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) { + int ctx = iommu_ctx->num; + uint32_t asid = GET_CONTEXTIDR_ASID(iommu->base, ctx); + SET_TLBIASID(iommu->base, ctx, asid); + __reset_context(iommu, ctx); + } + + __disable_clocks(iommu); + + list_del(&iommu->dom_node); + } + + // TODO might want to put_device(iommu->dev) unless iommu framework + // does this somewhere for us? + +fail: + mutex_unlock(&qcom_iommu_lock); +} + +static int __get_pgprot(int prot, int len) +{ + unsigned int pgprot; + int tex; + + if (!(prot & (IOMMU_READ | IOMMU_WRITE))) { + prot |= IOMMU_READ | IOMMU_WRITE; + WARN_ONCE(1, "No attributes in iommu mapping; assuming RW\n"); + } + + if ((prot & IOMMU_WRITE) && !(prot & IOMMU_READ)) { + prot |= IOMMU_READ; + WARN_ONCE(1, "Write-only iommu mappings unsupported; falling back to RW\n"); + } + + if (prot & IOMMU_CACHE) + tex = (pgprot_kernel >> 2) & 0x07; + else + tex = qcom_iommu_tex_class[QCOM_IOMMU_ATTR_NONCACHED]; + + if (tex < 0 || tex > NUM_TEX_CLASS - 1) + return 0; + + if (len == SZ_16M || len == SZ_1M) { + pgprot = FL_SHARED; + pgprot |= tex & 0x01 ? FL_BUFFERABLE : 0; + pgprot |= tex & 0x02 ? FL_CACHEABLE : 0; + pgprot |= tex & 0x04 ? FL_TEX0 : 0; + pgprot |= FL_AP0 | FL_AP1; + pgprot |= prot & IOMMU_WRITE ? 0 : FL_AP2; + } else { + pgprot = SL_SHARED; + pgprot |= tex & 0x01 ? SL_BUFFERABLE : 0; + pgprot |= tex & 0x02 ? SL_CACHEABLE : 0; + pgprot |= tex & 0x04 ? SL_TEX0 : 0; + pgprot |= SL_AP0 | SL_AP1; + pgprot |= prot & IOMMU_WRITE ? 0 : SL_AP2; + } + + return pgprot; +} + +static int qcom_iommu_map(struct iommu_domain *domain, unsigned long va, + phys_addr_t pa, size_t len, int prot) +{ + struct qcom_domain_priv *priv = domain->priv; + struct qcom_iommu *iommu; + unsigned long *fl_table, *fl_pte, fl_offset; + unsigned long *sl_table, *sl_pte, sl_offset; + unsigned int pgprot; + int ret = 0; + + mutex_lock(&qcom_iommu_lock); + + if (!priv || list_empty(&priv->iommu_list)) + goto fail; + + /* all IOMMU's in the domain have same pgtables: */ + iommu = list_first_entry(&priv->iommu_list, + struct qcom_iommu, dom_node); + + fl_table = priv->pgtable; + + if (len != SZ_16M && len != SZ_1M && + len != SZ_64K && len != SZ_4K) { + dev_err(iommu->dev, "Bad size: %d\n", len); + ret = -EINVAL; + goto fail; + } + + if (!fl_table) { + dev_err(iommu->dev, "Null page table\n"); + ret = -EINVAL; + goto fail; + } + + pgprot = __get_pgprot(prot, len); + + if (!pgprot) { + ret = -EINVAL; + goto fail; + } + + fl_offset = FL_OFFSET(va); /* Upper 12 bits */ + fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ + + if (len == SZ_16M) { + int i = 0; + + for (i = 0; i < 16; i++) + if (*(fl_pte+i)) { + ret = -EBUSY; + goto fail; + } + + for (i = 0; i < 16; i++) + *(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION + | FL_TYPE_SECT | FL_SHARED | FL_NG | pgprot; + __flush_range(iommu, fl_pte, fl_pte + 16); + } + + if (len == SZ_1M) { + if (*fl_pte) { + ret = -EBUSY; + goto fail; + } + + *fl_pte = (pa & 0xFFF00000) | FL_NG | FL_TYPE_SECT | FL_SHARED + | pgprot; + __flush_range(iommu, fl_pte, fl_pte + 1); + } + + /* Need a 2nd level table */ + if (len == SZ_4K || len == SZ_64K) { + + if (*fl_pte == 0) { + unsigned long *sl; + sl = (unsigned long *) __get_free_pages(GFP_ATOMIC, + get_order(SZ_4K)); + + if (!sl) { + dev_err(iommu->dev, "Could not allocate second level table\n"); + ret = -ENOMEM; + goto fail; + } + memset(sl, 0, SZ_4K); + __flush_range(iommu, sl, sl + NUM_SL_PTE); + + *fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | \ + FL_TYPE_TABLE); + + __flush_range(iommu, fl_pte, fl_pte + 1); + } + + if (!(*fl_pte & FL_TYPE_TABLE)) { + ret = -EBUSY; + goto fail; + } + } + + sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); + sl_offset = SL_OFFSET(va); + sl_pte = sl_table + sl_offset; + + if (len == SZ_4K) { + if (*sl_pte) { + ret = -EBUSY; + goto fail; + } + + *sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_NG | SL_SHARED + | SL_TYPE_SMALL | pgprot; + __flush_range(iommu, sl_pte, sl_pte + 1); + } + + if (len == SZ_64K) { + int i; + + for (i = 0; i < 16; i++) + if (*(sl_pte+i)) { + ret = -EBUSY; + goto fail; + } + + for (i = 0; i < 16; i++) + *(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_NG + | SL_SHARED | SL_TYPE_LARGE | pgprot; + + __flush_range(iommu, sl_pte, sl_pte + 16); + } + + ret = __flush_iotlb_va(priv, va); + +fail: + mutex_unlock(&qcom_iommu_lock); + return ret; +} + +static size_t qcom_iommu_unmap(struct iommu_domain *domain, unsigned long va, + size_t len) +{ + struct qcom_domain_priv *priv = domain->priv; + struct qcom_iommu *iommu; + unsigned long *fl_table, *fl_pte, fl_offset; + unsigned long *sl_table, *sl_pte, sl_offset; + int i, ret = 0; + + mutex_lock(&qcom_iommu_lock); + + if (!priv || list_empty(&priv->iommu_list)) + goto fail; + + /* all IOMMU's in the domain have same pgtables: */ + iommu = list_first_entry(&priv->iommu_list, + struct qcom_iommu, dom_node); + + fl_table = priv->pgtable; + + if (len != SZ_16M && len != SZ_1M && + len != SZ_64K && len != SZ_4K) { + dev_err(iommu->dev, "Bad length: %d\n", len); + goto fail; + } + + if (!fl_table) { + dev_err(iommu->dev, "Null page table\n"); + goto fail; + } + + fl_offset = FL_OFFSET(va); /* Upper 12 bits */ + fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ + + if (*fl_pte == 0) { + dev_err(iommu->dev, "First level PTE is 0\n"); + goto fail; + } + + /* Unmap supersection */ + if (len == SZ_16M) { + for (i = 0; i < 16; i++) + *(fl_pte+i) = 0; + + __flush_range(iommu, fl_pte, fl_pte + 16); + } + + if (len == SZ_1M) { + *fl_pte = 0; + + __flush_range(iommu, fl_pte, fl_pte + 1); + } + + sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); + sl_offset = SL_OFFSET(va); + sl_pte = sl_table + sl_offset; + + if (len == SZ_64K) { + for (i = 0; i < 16; i++) + *(sl_pte+i) = 0; + + __flush_range(iommu, sl_pte, sl_pte + 16); + } + + if (len == SZ_4K) { + *sl_pte = 0; + + __flush_range(iommu, sl_pte, sl_pte + 1); + } + + if (len == SZ_4K || len == SZ_64K) { + int used = 0; + + for (i = 0; i < NUM_SL_PTE; i++) + if (sl_table[i]) + used = 1; + if (!used) { + free_page((unsigned long)sl_table); + *fl_pte = 0; + + __flush_range(iommu, fl_pte, fl_pte + 1); + } + } + + ret = __flush_iotlb_va(priv, va); + +fail: + mutex_unlock(&qcom_iommu_lock); + + /* the IOMMU API requires us to return how many bytes were unmapped */ + len = ret ? 0 : len; + return len; +} + +static phys_addr_t qcom_iommu_iova_to_phys(struct iommu_domain *domain, + dma_addr_t va) +{ + struct qcom_domain_priv *priv = domain->priv; + struct qcom_iommu *iommu; + struct qcom_iommu_ctx *iommu_ctx; + unsigned int par; + void __iomem *base; + phys_addr_t ret = 0; + int ctx; + + mutex_lock(&qcom_iommu_lock); + + if (!priv || list_empty(&priv->iommu_list)) + goto fail; + + /* all IOMMU's in the domain have same pgtables: */ + iommu = list_first_entry(&priv->iommu_list, + struct qcom_iommu, dom_node); + + if (list_empty(&iommu->ctx_list)) + goto fail; + + iommu_ctx = list_first_entry(&iommu->ctx_list, + struct qcom_iommu_ctx, node); + + base = iommu->base; + ctx = iommu_ctx->num; + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + SET_V2PPR(base, ctx, va & V2Pxx_VA); + + mb(); + par = GET_PAR(base, ctx); + + /* We are dealing with a supersection */ + if (GET_NOFAULT_SS(base, ctx)) + ret = (par & 0xFF000000) | (va & 0x00FFFFFF); + else /* Upper 20 bits from PAR, lower 12 from VA */ + ret = (par & 0xFFFFF000) | (va & 0x00000FFF); + + if (GET_FAULT(base, ctx)) + ret = 0; + + __disable_clocks(iommu); + +fail: + mutex_unlock(&qcom_iommu_lock); + return ret; +} + +static void print_ctx_regs(void __iomem *base, int ctx) +{ + unsigned int fsr = GET_FSR(base, ctx); + pr_err("FAR = %08x PAR = %08x\n", + GET_FAR(base, ctx), GET_PAR(base, ctx)); + pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr, + (fsr & 0x02) ? "TF " : "", + (fsr & 0x04) ? "AFF " : "", + (fsr & 0x08) ? "APF " : "", + (fsr & 0x10) ? "TLBMF " : "", + (fsr & 0x20) ? "HTWDEEF " : "", + (fsr & 0x40) ? "HTWSEEF " : "", + (fsr & 0x80) ? "MHF " : "", + (fsr & 0x10000) ? "SL " : "", + (fsr & 0x40000000) ? "SS " : "", + (fsr & 0x80000000) ? "MULTI " : ""); + + pr_err("FSYNR0 = %08x FSYNR1 = %08x\n", + GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx)); + pr_err("TTBR0 = %08x TTBR1 = %08x\n", + GET_TTBR0(base, ctx), GET_TTBR1(base, ctx)); + pr_err("SCTLR = %08x ACTLR = %08x\n", + GET_SCTLR(base, ctx), GET_ACTLR(base, ctx)); + pr_err("PRRR = %08x NMRR = %08x\n", + GET_PRRR(base, ctx), GET_NMRR(base, ctx)); +} + +static irqreturn_t __fault_handler(int irq, void *dev_id) +{ + struct platform_device *pdev = dev_id; + struct qcom_iommu *iommu = platform_get_drvdata(pdev); + struct qcom_iommu_ctx *iommu_ctx = NULL; + void __iomem *base = iommu->base; + int ret; + bool first = true; + + mutex_lock(&qcom_iommu_lock); + + ret = __enable_clocks(iommu); + if (ret) + goto fail; + + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) { + int i = iommu_ctx->num; + unsigned int fsr = GET_FSR(base, i); + unsigned long iova; + int flags; + + if (!fsr) + continue; + + iova = GET_FAR(base, i); + + /* TODO without docs, not sure about IOMMU_FAULT_* flags */ + flags = 0; + + if (!report_iommu_fault(iommu->domain, iommu->dev, + iova, flags)) { + ret = IRQ_HANDLED; + } else { + // XXX ratelimited + if (first) { + /* only print header for first context */ + pr_err("Unexpected IOMMU page fault!\n"); + pr_err("base = %08x\n", (unsigned int) base); + first = false; + } + pr_err("Fault occurred in context %d.\n", i); + pr_err("name = %s\n", dev_name(&pdev->dev)); + pr_err("Interesting registers:\n"); + print_ctx_regs(base, i); + } + + SET_FSR(base, i, fsr); + SET_RESUME(base, i, 1); + } + __disable_clocks(iommu); + +fail: + mutex_unlock(&qcom_iommu_lock); + return IRQ_HANDLED; +} + +static struct iommu_ops qcom_iommu_ops = { + .domain_init = qcom_iommu_domain_init, + .domain_destroy = qcom_iommu_domain_destroy, + .attach_dev = qcom_iommu_attach_dev, + .detach_dev = qcom_iommu_detach_dev, + .map = qcom_iommu_map, + .unmap = qcom_iommu_unmap, + .iova_to_phys = qcom_iommu_iova_to_phys, + .pgsize_bitmap = QCOM_IOMMU_PGSIZES, +}; + +/* + * IOMMU Platform Driver: + */ + +static int __register_ctx(struct qcom_iommu *iommu, + struct of_phandle_args *masterspec, int ctx) +{ + struct qcom_iommu_ctx *iommu_ctx; + int i, ret; + + if (masterspec->args_count > MAX_NUM_MIDS) + return -EINVAL; + + iommu_ctx = kzalloc(sizeof(*iommu_ctx), GFP_KERNEL); + if (!iommu) { + ret = -ENOMEM; + goto fail; + } + + iommu_ctx->of_node = masterspec->np; + iommu_ctx->num = ctx; + + for (i = 0; i < masterspec->args_count; i++) + iommu_ctx->mids[i] = masterspec->args[i]; + for (; i < ARRAY_SIZE(iommu_ctx->mids); i++) + iommu_ctx->mids[i] = -1; + + list_add_tail(&iommu_ctx->node, &iommu->ctx_list); + + return 0; + +fail: + // TODO cleanup; + return ret; +} + +static int qcom_iommu_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct qcom_iommu *iommu; + struct qcom_iommu_ctx *iommu_ctx; + struct of_phandle_args masterspec; + struct resource *r; + int ctx, ret, par, i; + u32 val; + + iommu = kzalloc(sizeof(*iommu), GFP_KERNEL); + if (!iommu) { + ret = -ENOMEM; + goto fail; + } + + iommu->dev = &pdev->dev; + INIT_LIST_HEAD(&iommu->ctx_list); + + ret = of_property_read_u32(node, "ncb", &val); + if (ret) { + dev_err(iommu->dev, "could not get ncb\n"); + goto fail; + } + iommu->ncb = val; + + ret = of_property_read_u32(node, "ttbr-split", &val); + if (ret) + val = 0; + iommu->ttbr_split = val; + + iommu->pclk = devm_clk_get(iommu->dev, "smmu_pclk"); + if (IS_ERR(iommu->pclk)) { + dev_err(iommu->dev, "could not get smmu_pclk\n"); + ret = PTR_ERR(iommu->pclk); + iommu->pclk = NULL; + goto fail; + } + + iommu->clk = devm_clk_get(iommu->dev, "iommu_clk"); + if (IS_ERR(iommu->clk)) { + dev_err(iommu->dev, "could not get iommu_clk\n"); + ret = PTR_ERR(iommu->clk); + iommu->clk = NULL; + goto fail; + } + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "physbase"); + if (!r) { + dev_err(iommu->dev, "could not get physbase\n"); + ret = -ENODEV; + goto fail; + } + + iommu->base = devm_ioremap_resource(iommu->dev, r); + if (IS_ERR(iommu->base)) { + ret = PTR_ERR(iommu->base); + goto fail; + } + + iommu->irq = platform_get_irq_byname(pdev, "nonsecure_irq"); + if (WARN_ON(iommu->irq < 0)) { + ret = -ENODEV; + goto fail; + } + + /* now find our contexts: */ + i = 0; + while (!of_parse_phandle_with_args(node, "mmu-masters", + "#stream-id-cells", i, &masterspec)) { + ret = __register_ctx(iommu, &masterspec, i); + if (ret) { + dev_err(iommu->dev, "failed to add context %s\n", + masterspec.np->name); + goto fail; + } + + i++; + } + dev_notice(iommu->dev, "registered %d master devices\n", i); + + __enable_clocks(iommu); + __reset_iommu(iommu); + + SET_M(iommu->base, 0, 1); + SET_PAR(iommu->base, 0, 0); + SET_V2PCFG(iommu->base, 0, 1); + SET_V2PPR(iommu->base, 0, 0); + mb(); + par = GET_PAR(iommu->base, 0); + SET_V2PCFG(iommu->base, 0, 0); + SET_M(iommu->base, 0, 0); + mb(); + + ctx = 0; + list_for_each_entry(iommu_ctx, &iommu->ctx_list, node) { + for (i = 0; iommu_ctx->mids[i] != -1; i++) { + int mid = iommu_ctx->mids[i]; + + SET_M2VCBR_N(iommu->base, mid, 0); + SET_CBACR_N(iommu->base, ctx, 0); + + /* Set VMID = 0 */ + SET_VMID(iommu->base, mid, 0); + + /* Set the context number for that MID to this context */ + SET_CBNDX(iommu->base, mid, ctx); + + /* Set MID associated with this context bank to 0*/ + SET_CBVMID(iommu->base, ctx, 0); + + /* Set the ASID for TLB tagging for this context */ + SET_CONTEXTIDR_ASID(iommu->base, ctx, ctx); + + /* Set security bit override to be Non-secure */ + SET_NSCFG(iommu->base, mid, 3); + } + + ctx++; + } + + __disable_clocks(iommu); + + if (!par) { + dev_err(iommu->dev, "Invalid PAR value detected\n"); + ret = -ENODEV; + goto fail; + } + + ret = devm_request_threaded_irq(iommu->dev, iommu->irq, NULL, + __fault_handler, IRQF_ONESHOT | IRQF_SHARED, + "iommu", pdev); + if (ret) { + dev_err(iommu->dev, "Request IRQ %d failed with ret=%d\n", + iommu->irq, ret); + goto fail; + } + + dev_info(iommu->dev, "device mapped at %p, irq %d with %d ctx banks\n", + iommu->base, iommu->irq, iommu->ncb); + + platform_set_drvdata(pdev, iommu); + + mutex_lock(&qcom_iommu_lock); + list_add(&iommu->dev_node, &qcom_iommu_devices); + mutex_unlock(&qcom_iommu_lock); + + return 0; +fail: + // TODO cleanup.. + return ret; +} + +static int qcom_iommu_remove(struct platform_device *pdev) +{ + struct qcom_iommu *priv = platform_get_drvdata(pdev); + + if (WARN_ON(!priv)) + return 0; + + if (priv->clk) + clk_disable_unprepare(priv->clk); + + if (priv->pclk) + clk_disable_unprepare(priv->pclk); + + platform_set_drvdata(pdev, NULL); + kfree(priv); + + return 0; +} + +static const struct of_device_id qcom_iommu_dt_match[] = { + { .compatible = "qcom,iommu-v0" }, + {} +}; + +static struct platform_driver qcom_iommu_driver = { + .driver = { + .name = "qcom-iommu-v0", + .of_match_table = qcom_iommu_dt_match, + }, + .probe = qcom_iommu_probe, + .remove = qcom_iommu_remove, +}; + +static int __init get_tex_class(int icp, int ocp, int mt, int nos) +{ + int i = 0; + unsigned int prrr = 0; + unsigned int nmrr = 0; + int c_icp, c_ocp, c_mt, c_nos; + + RCP15_PRRR(prrr); + RCP15_NMRR(nmrr); + + for (i = 0; i < NUM_TEX_CLASS; i++) { + c_nos = PRRR_NOS(prrr, i); + c_mt = PRRR_MT(prrr, i); + c_icp = NMRR_ICP(nmrr, i); + c_ocp = NMRR_OCP(nmrr, i); + + if (icp == c_icp && ocp == c_ocp && c_mt == mt && c_nos == nos) + return i; + } + + return -ENODEV; +} + +static int __init qcom_iommu_init(void) +{ + int ret; + + ret = platform_driver_register(&qcom_iommu_driver); + if (ret) { + pr_err("Failed to register IOMMU driver\n"); + goto error; + } + + qcom_iommu_tex_class[QCOM_IOMMU_ATTR_NONCACHED] = + get_tex_class(CP_NONCACHED, CP_NONCACHED, MT_NORMAL, 1); + + qcom_iommu_tex_class[QCOM_IOMMU_ATTR_CACHED_WB_WA] = + get_tex_class(CP_WB_WA, CP_WB_WA, MT_NORMAL, 1); + + qcom_iommu_tex_class[QCOM_IOMMU_ATTR_CACHED_WB_NWA] = + get_tex_class(CP_WB_NWA, CP_WB_NWA, MT_NORMAL, 1); + + qcom_iommu_tex_class[QCOM_IOMMU_ATTR_CACHED_WT] = + get_tex_class(CP_WT, CP_WT, MT_NORMAL, 1); + + bus_set_iommu(&platform_bus_type, &qcom_iommu_ops); + + return 0; + +error: + return ret; +} + +static void __exit qcom_iommu_driver_exit(void) +{ + platform_driver_unregister(&qcom_iommu_driver); +} + +subsys_initcall(qcom_iommu_init); +module_exit(qcom_iommu_driver_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); +MODULE_AUTHOR("Rob Clark <robdclark@gmail.com>"); diff --git a/drivers/iommu/qcom_iommu_v0.h b/drivers/iommu/qcom_iommu_v0.h new file mode 100644 index 000000000000..a3d1e37182c8 --- /dev/null +++ b/drivers/iommu/qcom_iommu_v0.h @@ -0,0 +1,99 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (C) 2014 Red Hat + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +/* NOTE: originally based on msm_iommu non-DT driver for same hw + * but as the structure of the driver changes considerably for DT + * it seemed easier to not try to support old platforms with the + * same driver. + */ + +#ifndef QCOM_IOMMU_V0_H +#define QCOM_IOMMU_V0_H + +#include <linux/interrupt.h> +#include <linux/clk.h> + +/* Sharability attributes of QCOM IOMMU mappings */ +#define QCOM_IOMMU_ATTR_NON_SH 0x0 +#define QCOM_IOMMU_ATTR_SH 0x4 + +/* Cacheability attributes of QCOM IOMMU mappings */ +#define QCOM_IOMMU_ATTR_NONCACHED 0x0 +#define QCOM_IOMMU_ATTR_CACHED_WB_WA 0x1 +#define QCOM_IOMMU_ATTR_CACHED_WB_NWA 0x2 +#define QCOM_IOMMU_ATTR_CACHED_WT 0x3 + +/* Mask for the cache policy attribute */ +#define QCOM_IOMMU_CP_MASK 0x03 + +/* Maximum number of Machine IDs that we are allowing to be mapped to the same + * context bank. The number of MIDs mapped to the same CB does not affect + * performance, but there is a practical limit on how many distinct MIDs may + * be present. These mappings are typically determined at design time and are + * not expected to change at run time. + */ +#define MAX_NUM_MIDS 32 + +/** + * struct qcom_iommu - a single IOMMU hardware instance + * @dev: IOMMU device + * @base: IOMMU config port base address (VA) + * @irq: Interrupt number + * @ncb: Number of context banks present on this IOMMU HW instance + * @ttbr_split: ttbr split + * @clk: The bus clock for this IOMMU hardware instance + * @pclk: The clock for the IOMMU bus interconnect + * @ctx_list: list of 'struct qcom_iommu_ctx' + * @dev_node: list head in qcom_iommu_devices list + * @dom_node: list head in domain + * @domain: attached domain. Note that the relationship between domain and + * and iommu's is N:1, ie. an IOMMU can only be attached to one domain, + * but a domain can be attached to many IOMMUs + */ +struct qcom_iommu { + struct device *dev; + void __iomem *base; + int irq; + int ncb; + int ttbr_split; + struct clk *clk; + struct clk *pclk; + struct list_head ctx_list; + struct list_head dev_node; + struct list_head dom_node; + struct iommu_domain *domain; +}; + +/** + * struct qcom_iommu_ctx - an IOMMU context bank instance + * @of_node: node ptr of client device + * @num: Index of this context bank within the hardware + * @mids: List of Machine IDs that are to be mapped into this context + * bank, terminated by -1. The MID is a set of signals on the + * AXI bus that identifies the function associated with a specific + * memory request. (See ARM spec). + * @node: list head in ctx_list + */ +struct qcom_iommu_ctx { + struct device_node *of_node; + int num; + int mids[MAX_NUM_MIDS]; + struct list_head node; +}; + +#endif diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c index 5a92646a2ccb..d6dbe57ae113 100644 --- a/drivers/mfd/pm8921-core.c +++ b/drivers/mfd/pm8921-core.c @@ -26,6 +26,7 @@ #include <linux/regmap.h> #include <linux/of_platform.h> #include <linux/mfd/core.h> +#include <linux/mfd/pm8921-core.h> #define SSBI_REG_ADDR_IRQ_BASE 0x1BB @@ -65,6 +66,41 @@ struct pm_irq_chip { u8 config[0]; }; +int pm8xxx_read_irq_status(int irq) +{ + struct irq_data *d = irq_get_irq_data(irq); + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d); + unsigned int pmirq = irqd_to_hwirq(d); + unsigned int bits; + int irq_bit; + u8 block; + int rc; + + if (!chip) { + pr_err("Failed to resolve pm_irq_chip\n"); + return -EINVAL; + } + + block = pmirq / 8; + irq_bit = pmirq % 8; + + spin_lock(&chip->pm_irq_lock); + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block); + if (rc) { + pr_err("Failed Selecting Block %d rc=%d\n", block, rc); + goto bail; + } + + rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits); + if (rc) + pr_err("Failed Reading Status rc=%d\n", rc); +bail: + spin_unlock(&chip->pm_irq_lock); + + return rc ? rc : !!(bits & BIT(irq_bit)); +} +EXPORT_SYMBOL(pm8xxx_read_irq_status); + static int pm8xxx_read_block_irq(struct pm_irq_chip *chip, unsigned int bp, unsigned int *ip) { diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c index f696328c2933..eceb34f503da 100644 --- a/drivers/mfd/qcom_rpm.c +++ b/drivers/mfd/qcom_rpm.c @@ -331,6 +331,42 @@ static const struct of_device_id qcom_rpm_of_match[] = { }; MODULE_DEVICE_TABLE(of, qcom_rpm_of_match); +#define QCOM_RPM_STATUS_ID_SEQUENCE 7 +int qcom_rpm_read(struct qcom_rpm *rpm, + int resource, + u32 *val, + size_t count) +{ + const struct qcom_rpm_resource *res; + const struct qcom_rpm_data *data = rpm->data; + uint32_t seq_begin; + uint32_t seq_end; + int rc; + int i; + + if (WARN_ON(resource < 0 || resource >= data->n_resources)) + return -EINVAL; + + res = &data->resource_table[resource]; + if (WARN_ON(res->size != count)) + return -EINVAL; + + mutex_lock(&rpm->lock); + seq_begin = readl(RPM_STATUS_REG(rpm, QCOM_RPM_STATUS_ID_SEQUENCE)); + + for (i = 0; i < count; i++) + *val++ = readl(RPM_STATUS_REG(rpm, res->status_id)); + + seq_end = readl(RPM_STATUS_REG(rpm, QCOM_RPM_STATUS_ID_SEQUENCE)); + + rc = (seq_begin != seq_end || (seq_begin & 0x01)) ? -EBUSY : 0; + + mutex_unlock(&rpm->lock); + return rc; + +} +EXPORT_SYMBOL(qcom_rpm_read); + int qcom_rpm_write(struct qcom_rpm *rpm, int state, int resource, diff --git a/drivers/mfd/ssbi.c b/drivers/mfd/ssbi.c index 27986f641f7d..39734999fe40 100644 --- a/drivers/mfd/ssbi.c +++ b/drivers/mfd/ssbi.c @@ -330,7 +330,12 @@ static struct platform_driver ssbi_driver = { .of_match_table = ssbi_match_table, }, }; -module_platform_driver(ssbi_driver); + +static int ssbi_init(void) +{ + return platform_driver_register(&ssbi_driver); +} +subsys_initcall(ssbi_init); MODULE_LICENSE("GPL v2"); MODULE_VERSION("1.0"); diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 9536852fd4c6..04f2e1fa9dd1 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -96,17 +96,4 @@ config EEPROM_DIGSY_MTC_CFG If unsure, say N. -config EEPROM_SUNXI_SID - tristate "Allwinner sunxi security ID support" - depends on ARCH_SUNXI && SYSFS - help - This is a driver for the 'security ID' available on various Allwinner - devices. - - Due to the potential risks involved with changing e-fuses, - this driver is read-only. - - This driver can also be built as a module. If so, the module - will be called sunxi_sid. - endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 9507aec95e94..fc1e81d29267 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -4,5 +4,4 @@ obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o obj-$(CONFIG_EEPROM_MAX6875) += max6875.o obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o -obj-$(CONFIG_EEPROM_SUNXI_SID) += sunxi_sid.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o diff --git a/drivers/misc/eeprom/sunxi_sid.c b/drivers/misc/eeprom/sunxi_sid.c deleted file mode 100644 index 8385177ff32b..000000000000 --- a/drivers/misc/eeprom/sunxi_sid.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl> - * http://www.linux-sunxi.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver exposes the Allwinner security ID, efuses exported in byte- - * sized chunks. - */ - -#include <linux/compiler.h> -#include <linux/device.h> -#include <linux/err.h> -#include <linux/export.h> -#include <linux/fs.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/kobject.h> -#include <linux/module.h> -#include <linux/of_device.h> -#include <linux/platform_device.h> -#include <linux/random.h> -#include <linux/slab.h> -#include <linux/stat.h> -#include <linux/sysfs.h> -#include <linux/types.h> - -#define DRV_NAME "sunxi-sid" - -struct sunxi_sid_data { - void __iomem *reg_base; - unsigned int keysize; -}; - -/* We read the entire key, due to a 32 bit read alignment requirement. Since we - * want to return the requested byte, this results in somewhat slower code and - * uses 4 times more reads as needed but keeps code simpler. Since the SID is - * only very rarely probed, this is not really an issue. - */ -static u8 sunxi_sid_read_byte(const struct sunxi_sid_data *sid_data, - const unsigned int offset) -{ - u32 sid_key; - - if (offset >= sid_data->keysize) - return 0; - - sid_key = ioread32be(sid_data->reg_base + round_down(offset, 4)); - sid_key >>= (offset % 4) * 8; - - return sid_key; /* Only return the last byte */ -} - -static ssize_t sid_read(struct file *fd, struct kobject *kobj, - struct bin_attribute *attr, char *buf, - loff_t pos, size_t size) -{ - struct platform_device *pdev; - struct sunxi_sid_data *sid_data; - int i; - - pdev = to_platform_device(kobj_to_dev(kobj)); - sid_data = platform_get_drvdata(pdev); - - if (pos < 0 || pos >= sid_data->keysize) - return 0; - if (size > sid_data->keysize - pos) - size = sid_data->keysize - pos; - - for (i = 0; i < size; i++) - buf[i] = sunxi_sid_read_byte(sid_data, pos + i); - - return i; -} - -static struct bin_attribute sid_bin_attr = { - .attr = { .name = "eeprom", .mode = S_IRUGO, }, - .read = sid_read, -}; - -static int sunxi_sid_remove(struct platform_device *pdev) -{ - device_remove_bin_file(&pdev->dev, &sid_bin_attr); - dev_dbg(&pdev->dev, "driver unloaded\n"); - - return 0; -} - -static const struct of_device_id sunxi_sid_of_match[] = { - { .compatible = "allwinner,sun4i-a10-sid", .data = (void *)16}, - { .compatible = "allwinner,sun7i-a20-sid", .data = (void *)512}, - {/* sentinel */}, -}; -MODULE_DEVICE_TABLE(of, sunxi_sid_of_match); - -static int sunxi_sid_probe(struct platform_device *pdev) -{ - struct sunxi_sid_data *sid_data; - struct resource *res; - const struct of_device_id *of_dev_id; - u8 *entropy; - unsigned int i; - - sid_data = devm_kzalloc(&pdev->dev, sizeof(struct sunxi_sid_data), - GFP_KERNEL); - if (!sid_data) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - sid_data->reg_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(sid_data->reg_base)) - return PTR_ERR(sid_data->reg_base); - - of_dev_id = of_match_device(sunxi_sid_of_match, &pdev->dev); - if (!of_dev_id) - return -ENODEV; - sid_data->keysize = (int)of_dev_id->data; - - platform_set_drvdata(pdev, sid_data); - - sid_bin_attr.size = sid_data->keysize; - if (device_create_bin_file(&pdev->dev, &sid_bin_attr)) - return -ENODEV; - - entropy = kzalloc(sizeof(u8) * sid_data->keysize, GFP_KERNEL); - for (i = 0; i < sid_data->keysize; i++) - entropy[i] = sunxi_sid_read_byte(sid_data, i); - add_device_randomness(entropy, sid_data->keysize); - kfree(entropy); - - dev_dbg(&pdev->dev, "loaded\n"); - - return 0; -} - -static struct platform_driver sunxi_sid_driver = { - .probe = sunxi_sid_probe, - .remove = sunxi_sid_remove, - .driver = { - .name = DRV_NAME, - .of_match_table = sunxi_sid_of_match, - }, -}; -module_platform_driver(sunxi_sid_driver); - -MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>"); -MODULE_DESCRIPTION("Allwinner sunxi security id driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7fe16194ebc8..5891c62d04e9 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -78,6 +78,7 @@ static unsigned int fmax = 515633; * @qcom_fifo: enables qcom specific fifo pio read logic. * @qcom_dml: enables qcom specific dma glue for dma transfers. * @reversed_irq_handling: handle data irq before cmd irq. + * @any_blksize: true if block any sizes are supported */ struct variant_data { unsigned int clkreg; @@ -104,6 +105,7 @@ struct variant_data { bool qcom_fifo; bool qcom_dml; bool reversed_irq_handling; + bool any_blksize; }; static struct variant_data variant_arm = { @@ -200,6 +202,7 @@ static struct variant_data variant_ux500v2 = { .pwrreg_clkgate = true, .busy_detect = true, .pwrreg_nopower = true, + .any_blksize = true, }; static struct variant_data variant_qcom = { @@ -218,6 +221,7 @@ static struct variant_data variant_qcom = { .explicit_mclk_control = true, .qcom_fifo = true, .qcom_dml = true, + .any_blksize = true, }; static int mmci_card_busy(struct mmc_host *mmc) @@ -245,10 +249,11 @@ static int mmci_card_busy(struct mmc_host *mmc) static int mmci_validate_data(struct mmci_host *host, struct mmc_data *data) { + struct variant_data *variant = host->variant; + if (!data) return 0; - - if (!is_power_of_2(data->blksz)) { + if (!is_power_of_2(data->blksz) && !variant->any_blksize) { dev_err(mmc_dev(host->mmc), "unsupported block size (%d bytes)\n", data->blksz); return -EINVAL; @@ -804,7 +809,6 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) writel(host->size, base + MMCIDATALENGTH); blksz_bits = ffs(data->blksz) - 1; - BUG_ON(1 << blksz_bits != data->blksz); if (variant->blksz_datactrl16) datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 7b892a9cc4fc..366ce65048e9 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -30,6 +30,11 @@ config PCI_IMX6 select PCIEPORTBUS select PCIE_DW +config PCI_QCOM + bool "Qualcomm PCIe controller" + default y + depends on ARCH_QCOM && !ARM64 + config PCI_TEGRA bool "NVIDIA Tegra PCIe controller" depends on ARCH_TEGRA && !ARM64 diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index e61d91c92bf1..2ac7bff70663 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o obj-$(CONFIG_PCI_XGENE) += pci-xgene.o obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o +obj-$(CONFIG_PCI_QCOM) += pci-qcom.o diff --git a/drivers/pci/host/pci-qcom.c b/drivers/pci/host/pci-qcom.c new file mode 100644 index 000000000000..c1150d575535 --- /dev/null +++ b/drivers/pci/host/pci-qcom.c @@ -0,0 +1,968 @@ +/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * QCOM MSM PCIe controller driver. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/of_gpio.h> +#include <linux/msi.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/of_address.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/delay.h> + +#define INT_PCI_MSI_NR (8 * 32) +#define MSM_PCIE_MSI_PHY 0xa0000000 + +#define PCIE20_MSI_CTRL_ADDR (0x820) +#define PCIE20_MSI_CTRL_UPPER_ADDR (0x824) +#define PCIE20_MSI_CTRL_INTR_EN (0x828) +#define PCIE20_MSI_CTRL_INTR_MASK (0x82C) +#define PCIE20_MSI_CTRL_INTR_STATUS (0x830) + +#define PCIE20_MSI_CTRL_MAX 8 +/* Root Complex Port vendor/device IDs */ +#define PCIE_VENDOR_ID_RCP 0x17cb +#define PCIE_DEVICE_ID_RCP 0x0101 + +#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) + +#define PCIE20_PARF_PCS_DEEMPH 0x34 +#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN1(x) __set(x, 21, 16) +#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) __set(x, 13, 8) +#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) __set(x, 5, 0) + +#define PCIE20_PARF_PCS_SWING 0x38 +#define PCIE20_PARF_PCS_SWING_TX_SWING_FULL(x) __set(x, 14, 8) +#define PCIE20_PARF_PCS_SWING_TX_SWING_LOW(x) __set(x, 6, 0) + +#define PCIE20_PARF_PHY_CTRL 0x40 +#define PCIE20_PARF_PHY_CTRL_PHY_TX0_TERM_OFFST(x) __set(x, 20, 16) +#define PCIE20_PARF_PHY_CTRL_PHY_LOS_LEVEL(x) __set(x, 12, 8) +#define PCIE20_PARF_PHY_CTRL_PHY_RTUNE_REQ (1 << 4) +#define PCIE20_PARF_PHY_CTRL_PHY_TEST_BURNIN (1 << 2) +#define PCIE20_PARF_PHY_CTRL_PHY_TEST_BYPASS (1 << 1) +#define PCIE20_PARF_PHY_CTRL_PHY_TEST_PWR_DOWN (1 << 0) + +#define PCIE20_PARF_PHY_REFCLK 0x4C +#define PCIE20_PARF_CONFIG_BITS 0x50 + +#define PCIE20_ELBI_SYS_CTRL 0x04 +#define PCIE20_ELBI_SYS_CTRL_LTSSM_EN 0x01 + +#define PCIE20_CAP 0x70 +#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) + +#define PCIE20_COMMAND_STATUS 0x04 +#define PCIE20_BUSNUMBERS 0x18 +#define PCIE20_MEMORY_BASE_LIMIT 0x20 + +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 +#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c +#define PCIE20_PLR_IATU_VIEWPORT 0x900 +#define PCIE20_PLR_IATU_CTRL1 0x904 +#define PCIE20_PLR_IATU_CTRL2 0x908 +#define PCIE20_PLR_IATU_LBAR 0x90C +#define PCIE20_PLR_IATU_UBAR 0x910 +#define PCIE20_PLR_IATU_LAR 0x914 +#define PCIE20_PLR_IATU_LTAR 0x918 +#define PCIE20_PLR_IATU_UTAR 0x91c + +#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 + +#define RD 0 +#define WR 1 + +#define MAX_RC_NUM 3 +#define PCIE_BUS_PRIV_DATA(pdev) \ + (((struct pci_sys_data *)pdev->bus->sysdata)->private_data) + +/* PCIe TLP types that we are interested in */ +#define PCI_CFG0_RDWR 0x4 +#define PCI_CFG1_RDWR 0x5 + +#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \ +({ \ + unsigned long timeout = jiffies + usecs_to_jiffies(timeout_us); \ + might_sleep_if(timeout_us); \ + for (;;) { \ + (val) = readl(addr); \ + if (cond) \ + break; \ + if (timeout_us && time_after(jiffies, timeout)) { \ + (val) = readl(addr); \ + break; \ + } \ + if (sleep_us) \ + usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +struct qcom_msi { + struct msi_controller chip; + DECLARE_BITMAP(used, INT_PCI_MSI_NR); + struct irq_domain *domain; + unsigned long pages; + struct mutex lock; + int irq; +}; + +struct qcom_pcie { + void __iomem *elbi_base; + void __iomem *parf_base; + void __iomem *dwc_base; + void __iomem *cfg_base; + struct device *dev; + int reset_gpio; + bool ext_phy_ref_clk; + struct clk *iface_clk; + struct clk *bus_clk; + struct clk *phy_clk; + int irq_int[4]; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *pci_reset; + struct reset_control *phy_reset; + + struct resource conf; + struct resource io; + struct resource mem; + + struct regulator *vdd_supply; + struct regulator *avdd_supply; + struct regulator *pcie_clk_supply; + struct regulator *pcie_ext3p3v_supply; + + struct qcom_msi msi; +}; + +static int nr_controllers; +static DEFINE_SPINLOCK(qcom_hw_pci_lock); + +static inline struct qcom_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + + +inline int is_msm_pcie_rc(struct pci_bus *bus) +{ + return (bus->number == 0); +} + +static int qcom_pcie_is_link_up(struct qcom_pcie *dev) +{ + return readl_relaxed(dev->dwc_base + PCIE20_CAP_LINKCTRLSTATUS) & + BIT(29); +} + +inline int msm_pcie_get_cfgtype(struct pci_bus *bus) +{ + /* + * http://www.tldp.org/LDP/tlk/dd/pci.html + * Pass it onto the secondary bus interface unchanged if the + * bus number specified is greater than the secondary bus + * number and less than or equal to the subordinate bus + * number. + * + * Read/Write to the RC and Device/Switch connected to the RC + * are CFG0 type transactions. Rest have to be forwarded + * down stream as CFG1 transactions. + * + */ + if (bus->number == 0) + return PCI_CFG0_RDWR; + + return PCI_CFG0_RDWR; +} + +void msm_pcie_config_cfgtype(struct pci_bus *bus, u32 devfn) +{ + uint32_t bdf, cfgtype; + struct qcom_pcie *dev = sys_to_pcie(bus->sysdata); + + cfgtype = msm_pcie_get_cfgtype(bus); + + if (cfgtype == PCI_CFG0_RDWR) { + bdf = MSM_PCIE_DEV_CFG_ADDR; + } else { + /* + * iATU Lower Target Address Register + * Bits Description + * *-1:0 Forms bits [*:0] of the + * start address of the new + * address of the translated + * region. The start address + * must be aligned to a + * CX_ATU_MIN_REGION_SIZE kB + * boundary, so these bits are + * always 0. A write to this + * location is ignored by the + * PCIe core. + * 31:*1 Forms bits [31:*] of the of + * the new address of the + * translated region. + * + * * is log2(CX_ATU_MIN_REGION_SIZE) + */ + bdf = (((bus->number & 0xff) << 24) & 0xff000000) | + (((devfn & 0xff) << 16) & 0x00ff0000); + } + + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT); + wmb(); + + /* Program Bdf Address */ + writel_relaxed(bdf, dev->dwc_base + PCIE20_PLR_IATU_LTAR); + wmb(); + + /* Write Config Request Type */ + writel_relaxed(cfgtype, dev->dwc_base + PCIE20_PLR_IATU_CTRL1); + wmb(); +} + +static inline int msm_pcie_oper_conf(struct pci_bus *bus, u32 devfn, int oper, + int where, int size, u32 *val) +{ + uint32_t word_offset, byte_offset, mask; + uint32_t rd_val, wr_val; + struct qcom_pcie *dev = sys_to_pcie(bus->sysdata); + void __iomem *config_base; + int rc; + + rc = is_msm_pcie_rc(bus); + + /* + * For downstream bus, make sure link is up + */ + if (rc && (devfn != 0)) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } else if ((!rc) && (!qcom_pcie_is_link_up(dev))) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + msm_pcie_config_cfgtype(bus, devfn); + + word_offset = where & ~0x3; + byte_offset = where & 0x3; + mask = (~0 >> (8 * (4 - size))) << (8 * byte_offset); + + config_base = (rc) ? dev->dwc_base : dev->cfg_base; + rd_val = readl_relaxed(config_base + word_offset); + + if (oper == RD) { + *val = ((rd_val & mask) >> (8 * byte_offset)); + } else { + wr_val = (rd_val & ~mask) | + ((*val << (8 * byte_offset)) & mask); + writel_relaxed(wr_val, config_base + word_offset); + wmb(); /* ensure config data is written to hardware register */ + } + + return 0; +} + +static int msm_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + return msm_pcie_oper_conf(bus, devfn, RD, where, size, val); +} + +static int msm_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + /* + *Attempt to reset secondary bus is causing PCIE core to reset. + *Disable secondary bus reset functionality. + */ + if ((bus->number == 0) && (where == PCI_BRIDGE_CONTROL) && + (val & PCI_BRIDGE_CTL_BUS_RESET)) { + pr_info("PCIE secondary bus reset not supported\n"); + val &= ~PCI_BRIDGE_CTL_BUS_RESET; + } + + return msm_pcie_oper_conf(bus, devfn, WR, where, size, &val); +} + +static int qcom_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct qcom_pcie *pcie_dev = PCIE_BUS_PRIV_DATA(dev); + + return pcie_dev->irq_int[pin-1]; +} + +static int qcom_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct qcom_pcie *qcom_pcie = sys->private_data; + + /* + * specify linux PCI framework to allocate device memory (BARs) + * from msm_pcie_dev.dev_mem_res resource. + */ + sys->mem_offset = 0; + sys->io_offset = 0; + + pci_add_resource(&sys->resources, &qcom_pcie->mem); + pci_add_resource(&sys->resources, &qcom_pcie->io); + + return 1; +} + +static struct pci_ops qcom_pcie_ops = { + .read = msm_pcie_rd_conf, + .write = msm_pcie_wr_conf, +}; + +static struct hw_pci qcom_hw_pci[MAX_RC_NUM] = { + { + .ops = &qcom_pcie_ops, + .nr_controllers = 1, + .swizzle = pci_common_swizzle, + .setup = qcom_pcie_setup, + .map_irq = qcom_pcie_map_irq, + }, + { + .ops = &qcom_pcie_ops, + .nr_controllers = 1, + .swizzle = pci_common_swizzle, + .setup = qcom_pcie_setup, + .map_irq = qcom_pcie_map_irq, + }, + { + .ops = &qcom_pcie_ops, + .nr_controllers = 1, + .swizzle = pci_common_swizzle, + .setup = qcom_pcie_setup, + .map_irq = qcom_pcie_map_irq, + }, +}; + +static inline void qcom_elbi_writel_relaxed(struct qcom_pcie *pcie, + u32 val, u32 reg) +{ + writel_relaxed(val, pcie->elbi_base + reg); +} + +static inline u32 qcom_elbi_readl_relaxed(struct qcom_pcie *pcie, u32 reg) +{ + return readl_relaxed(pcie->elbi_base + reg); +} + +static inline void qcom_parf_writel_relaxed(struct qcom_pcie *pcie, + u32 val, u32 reg) +{ + writel_relaxed(val, pcie->parf_base + reg); +} + +static inline u32 qcom_parf_readl_relaxed(struct qcom_pcie *pcie, u32 reg) +{ + return readl_relaxed(pcie->parf_base + reg); +} + +static void msm_pcie_write_mask(void __iomem *addr, + uint32_t clear_mask, uint32_t set_mask) +{ + uint32_t val; + + val = (readl_relaxed(addr) & ~clear_mask) | set_mask; + writel_relaxed(val, addr); + wmb(); /* ensure data is written to hardware register */ +} + +static void qcom_pcie_config_controller(struct qcom_pcie *dev) +{ + /* + * program and enable address translation region 0 (device config + * address space); region type config; + * axi config address range to device config address range + */ + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT); + /* ensure that hardware locks the region before programming it */ + wmb(); + + writel_relaxed(4, dev->dwc_base + PCIE20_PLR_IATU_CTRL1); + writel_relaxed(BIT(31), dev->dwc_base + PCIE20_PLR_IATU_CTRL2); + writel_relaxed(dev->conf.start, dev->dwc_base + PCIE20_PLR_IATU_LBAR); + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UBAR); + writel_relaxed(dev->conf.end, dev->dwc_base + PCIE20_PLR_IATU_LAR); + writel_relaxed(MSM_PCIE_DEV_CFG_ADDR, + dev->dwc_base + PCIE20_PLR_IATU_LTAR); + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UTAR); + /* ensure that hardware registers the configuration */ + wmb(); + + /* + * program and enable address translation region 2 (device resource + * address space); region type memory; + * axi device bar address range to device bar address range + */ + writel_relaxed(2, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT); + /* ensure that hardware locks the region before programming it */ + wmb(); + + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_CTRL1); + writel_relaxed(BIT(31), dev->dwc_base + PCIE20_PLR_IATU_CTRL2); + writel_relaxed(dev->mem.start, dev->dwc_base + PCIE20_PLR_IATU_LBAR); + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UBAR); + writel_relaxed(dev->mem.end, dev->dwc_base + PCIE20_PLR_IATU_LAR); + writel_relaxed(dev->mem.start, + dev->dwc_base + PCIE20_PLR_IATU_LTAR); + writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UTAR); + /* ensure that hardware registers the configuration */ + wmb(); + + /* 1K PCIE buffer setting */ + writel_relaxed(0x3, dev->dwc_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); + writel_relaxed(0x1, dev->dwc_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); + /* ensure that hardware registers the configuration */ + wmb(); +} + +static int qcom_msi_alloc(struct qcom_msi *chip) +{ + int msi; + + mutex_lock(&chip->lock); + + msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR); + if (msi < INT_PCI_MSI_NR) + set_bit(msi, chip->used); + else + msi = -ENOSPC; + + mutex_unlock(&chip->lock); + + return msi; +} + +static void qcom_msi_free(struct qcom_msi *chip, unsigned long irq) +{ + struct device *dev = chip->chip.dev; + + mutex_lock(&chip->lock); + + if (!test_bit(irq, chip->used)) + dev_err(dev, "trying to free unused MSI#%lu\n", irq); + else + clear_bit(irq, chip->used); + + mutex_unlock(&chip->lock); +} + + +static irqreturn_t handle_msi_irq(int irq, void *data) +{ + int i, j, index; + unsigned long val; + struct qcom_pcie *dev = data; + void __iomem *ctrl_status; + struct qcom_msi *msi = &dev->msi; + + /* check for set bits, clear it by setting that bit + and trigger corresponding irq */ + for (i = 0; i < PCIE20_MSI_CTRL_MAX; i++) { + ctrl_status = dev->dwc_base + + PCIE20_MSI_CTRL_INTR_STATUS + (i * 12); + + val = readl_relaxed(ctrl_status); + while (val) { + j = find_first_bit(&val, 32); + index = j + (32 * i); + writel_relaxed(BIT(j), ctrl_status); + /* ensure that interrupt is cleared (acked) */ + wmb(); + + irq = irq_find_mapping(msi->domain, index); + if (irq) { + if (test_bit(index, msi->used)) + generic_handle_irq(irq); + else + dev_info(dev->dev, "unhandled MSI\n"); + } + val = readl_relaxed(ctrl_status); + } + } + + return IRQ_HANDLED; +} + +static inline struct qcom_msi *to_qcom_msi(struct msi_controller *chip) +{ + return container_of(chip, struct qcom_msi, chip); +} + +static int qcom_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct qcom_msi *msi = to_qcom_msi(chip); + struct msi_msg msg; + unsigned int irq; + int hwirq; + + hwirq = qcom_msi_alloc(msi); + if (hwirq < 0) + return hwirq; + + irq = irq_create_mapping(msi->domain, hwirq); + if (!irq) + return -EINVAL; + + irq_set_msi_desc(irq, desc); + + msg.address_lo = MSM_PCIE_MSI_PHY; + /* 32 bit address only */ + msg.address_hi = 0; + msg.data = hwirq; + + write_msi_msg(irq, &msg); + + return 0; +} + +static void qcom_msi_teardown_irq(struct msi_controller *chip, unsigned int irq) +{ + struct qcom_msi *msi = to_qcom_msi(chip); + struct irq_data *d = irq_get_irq_data(irq); + + qcom_msi_free(msi, d->hwirq); +} + +static struct irq_chip qcom_msi_irq_chip = { + .name = "PCI-MSI", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + + +static int qcom_pcie_msi_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(irq, &qcom_msi_irq_chip, handle_simple_irq); + irq_set_chip_data(irq, domain->host_data); + set_irq_flags(irq, IRQF_VALID); + + return 0; +} + + +static const struct irq_domain_ops msi_domain_ops = { + .map = qcom_pcie_msi_map, +}; +uint32_t msm_pcie_msi_init(struct qcom_pcie *pcie, struct platform_device *pdev) +{ + int i, rc; + struct qcom_msi *msi = &pcie->msi; + int err; + + mutex_init(&msi->lock); + + msi->chip.dev = pcie->dev; + msi->chip.setup_irq = qcom_msi_setup_irq; + msi->chip.teardown_irq = qcom_msi_teardown_irq; + msi->domain = irq_domain_add_linear(pdev->dev.of_node, INT_PCI_MSI_NR, + &msi_domain_ops, &msi->chip); + if (!msi->domain) { + dev_err(&pdev->dev, "failed to create IRQ domain\n"); + return -ENOMEM; + } + + + err = platform_get_irq_byname(pdev, "msi"); + if (err < 0) { + dev_err(&pdev->dev, "failed to get IRQ: %d\n", err); + return err; + } + + msi->irq = err; + + /* program MSI controller and enable all interrupts */ + writel_relaxed(MSM_PCIE_MSI_PHY, pcie->dwc_base + PCIE20_MSI_CTRL_ADDR); + writel_relaxed(0, pcie->dwc_base + PCIE20_MSI_CTRL_UPPER_ADDR); + + for (i = 0; i < PCIE20_MSI_CTRL_MAX; i++) + writel_relaxed(~0, pcie->dwc_base + + PCIE20_MSI_CTRL_INTR_EN + (i * 12)); + + /* ensure that hardware is configured before proceeding */ + wmb(); + + /* register handler for physical MSI interrupt line */ + rc = request_irq(msi->irq, handle_msi_irq, IRQF_TRIGGER_RISING, + "msm_pcie_msi", pcie); + if (rc) { + pr_err("Unable to allocate msi interrupt\n"); + return rc; + } + + return rc; +} + +static int qcom_pcie_vreg_on(struct qcom_pcie *qcom_pcie) +{ + int err; + /* enable regulators */ + err = regulator_enable(qcom_pcie->vdd_supply); + if (err < 0) { + dev_err(qcom_pcie->dev, "failed to enable VDD regulator\n"); + return err; + } + + err = regulator_enable(qcom_pcie->pcie_clk_supply); + if (err < 0) { + dev_err(qcom_pcie->dev, "failed to enable pcie-clk regulator\n"); + return err; + } + + err = regulator_enable(qcom_pcie->avdd_supply); + if (err < 0) { + dev_err(qcom_pcie->dev, "failed to enable AVDD regulator\n"); + return err; + } + + err = regulator_enable(qcom_pcie->pcie_ext3p3v_supply); + if (err < 0) { + dev_err(qcom_pcie->dev, "failed to enable pcie_ext3p3v regulator\n"); + return err; + } + + return err; + +} + +static int qcom_pcie_parse_dt(struct qcom_pcie *qcom_pcie, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct resource *elbi_base, *parf_base, *dwc_base; + struct of_pci_range range; + struct of_pci_range_parser parser; + int ret, i; + + qcom_pcie->ext_phy_ref_clk = of_property_read_bool(np, + "qcom,external-phy-refclk"); + + elbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi"); + qcom_pcie->elbi_base = devm_ioremap_resource(&pdev->dev, elbi_base); + if (IS_ERR(qcom_pcie->elbi_base)) { + dev_err(&pdev->dev, "Failed to ioremap elbi space\n"); + return PTR_ERR(qcom_pcie->elbi_base); + } + + parf_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); + qcom_pcie->parf_base = devm_ioremap_resource(&pdev->dev, parf_base); + if (IS_ERR(qcom_pcie->parf_base)) { + dev_err(&pdev->dev, "Failed to ioremap parf space\n"); + return PTR_ERR(qcom_pcie->parf_base); + } + + dwc_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); + qcom_pcie->dwc_base = devm_ioremap_resource(&pdev->dev, dwc_base); + if (IS_ERR(qcom_pcie->dwc_base)) { + dev_err(&pdev->dev, "Failed to ioremap dwc_base space\n"); + return PTR_ERR(qcom_pcie->dwc_base); + } + + if (of_pci_range_parser_init(&parser, np)) { + dev_err(&pdev->dev, "missing ranges property\n"); + return -EINVAL; + } + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + switch (range.pci_space & 0x3) { + case 0: /* cfg */ + of_pci_range_to_resource(&range, np, &qcom_pcie->conf); + qcom_pcie->conf.flags = IORESOURCE_MEM; + break; + case 1: /* io */ + of_pci_range_to_resource(&range, np, &qcom_pcie->io); + break; + default: /* mem */ + of_pci_range_to_resource(&range, np, &qcom_pcie->mem); + break; + } + } + + qcom_pcie->vdd_supply = devm_regulator_get(&pdev->dev, "vdd"); + if (IS_ERR(qcom_pcie->vdd_supply)) { + dev_err(&pdev->dev, "Failed to get vdd supply\n"); + return PTR_ERR(qcom_pcie->vdd_supply); + } + + qcom_pcie->pcie_clk_supply = devm_regulator_get(&pdev->dev, "pcie-clk"); + if (IS_ERR(qcom_pcie->pcie_clk_supply)) { + dev_err(&pdev->dev, "Failed to get pcie clk supply\n"); + return PTR_ERR(qcom_pcie->pcie_clk_supply); + } + qcom_pcie->avdd_supply = devm_regulator_get(&pdev->dev, "avdd"); + if (IS_ERR(qcom_pcie->avdd_supply)) { + dev_err(&pdev->dev, "Failed to get avdd supply\n"); + return PTR_ERR(qcom_pcie->avdd_supply); + } + + qcom_pcie->pcie_ext3p3v_supply = devm_regulator_get(&pdev->dev, + "ext-3p3v"); + if (IS_ERR(qcom_pcie->pcie_ext3p3v_supply)) { + dev_err(&pdev->dev, "Failed to get pcie_ext3p3v supply\n"); + return PTR_ERR(qcom_pcie->pcie_ext3p3v_supply); + } + + qcom_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); + if (!gpio_is_valid(qcom_pcie->reset_gpio)) { + dev_err(&pdev->dev, "pcie reset gpio is not valid\n"); + return -EINVAL; + } + + ret = devm_gpio_request_one(&pdev->dev, qcom_pcie->reset_gpio, + GPIOF_DIR_OUT, "pcie_reset"); + if (ret) { + dev_err(&pdev->dev, "Failed to request pcie reset gpio\n"); + return ret; + } + + qcom_pcie->iface_clk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(qcom_pcie->iface_clk)) { + dev_err(&pdev->dev, "Failed to get pcie iface clock\n"); + return PTR_ERR(qcom_pcie->iface_clk); + } + + qcom_pcie->phy_clk = devm_clk_get(&pdev->dev, "phy"); + if (IS_ERR(qcom_pcie->phy_clk)) { + dev_err(&pdev->dev, "Failed to get pcie phy clock\n"); + return PTR_ERR(qcom_pcie->phy_clk); + } + + qcom_pcie->bus_clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(qcom_pcie->bus_clk)) { + dev_err(&pdev->dev, "Failed to get pcie core clock\n"); + return PTR_ERR(qcom_pcie->bus_clk); + } + + qcom_pcie->axi_reset = devm_reset_control_get(&pdev->dev, "axi"); + if (IS_ERR(qcom_pcie->axi_reset)) { + dev_err(&pdev->dev, "Failed to get axi reset\n"); + return PTR_ERR(qcom_pcie->axi_reset); + } + + qcom_pcie->ahb_reset = devm_reset_control_get(&pdev->dev, "ahb"); + if (IS_ERR(qcom_pcie->ahb_reset)) { + dev_err(&pdev->dev, "Failed to get ahb reset\n"); + return PTR_ERR(qcom_pcie->ahb_reset); + } + + qcom_pcie->por_reset = devm_reset_control_get(&pdev->dev, "por"); + if (IS_ERR(qcom_pcie->por_reset)) { + dev_err(&pdev->dev, "Failed to get por reset\n"); + return PTR_ERR(qcom_pcie->por_reset); + } + + qcom_pcie->pci_reset = devm_reset_control_get(&pdev->dev, "pci"); + if (IS_ERR(qcom_pcie->pci_reset)) { + dev_err(&pdev->dev, "Failed to get pci reset\n"); + return PTR_ERR(qcom_pcie->pci_reset); + } + + qcom_pcie->phy_reset = devm_reset_control_get(&pdev->dev, "phy"); + if (IS_ERR(qcom_pcie->phy_reset)) { + dev_err(&pdev->dev, "Failed to get phy reset\n"); + return PTR_ERR(qcom_pcie->phy_reset); + } + + for (i = 0; i < 4; i++) { + qcom_pcie->irq_int[i] = platform_get_irq(pdev, i+1); + if (qcom_pcie->irq_int[i] < 0) { + dev_err(&pdev->dev, "failed to get irq resource\n"); + return qcom_pcie->irq_int[i]; + } + } + + return 0; +} + +static int qcom_pcie_probe(struct platform_device *pdev) +{ + unsigned long flags; + struct qcom_pcie *qcom_pcie; + struct hw_pci *hw; + int ret; + u32 val; + + qcom_pcie = devm_kzalloc(&pdev->dev, sizeof(*qcom_pcie), GFP_KERNEL); + if (!qcom_pcie) { + dev_err(&pdev->dev, "no memory for qcom_pcie\n"); + return -ENOMEM; + } + qcom_pcie->dev = &pdev->dev; + + ret = qcom_pcie_parse_dt(qcom_pcie, pdev); + if (IS_ERR_VALUE(ret)) + return ret; + + qcom_pcie->cfg_base = devm_ioremap_resource(&pdev->dev, + &qcom_pcie->conf); + if (IS_ERR(qcom_pcie->cfg_base)) { + dev_err(&pdev->dev, "Failed to ioremap PCIe cfg space\n"); + return PTR_ERR(qcom_pcie->cfg_base); + } + + gpio_set_value(qcom_pcie->reset_gpio, 0); + usleep_range(10000, 15000); + + /* enable power */ + qcom_pcie_vreg_on(qcom_pcie); + /* assert PCIe PARF reset while powering the core */ + reset_control_assert(qcom_pcie->ahb_reset); + + /* enable clocks */ + ret = clk_prepare_enable(qcom_pcie->iface_clk); + if (ret) + return ret; + ret = clk_prepare_enable(qcom_pcie->phy_clk); + if (ret) + return ret; + ret = clk_prepare_enable(qcom_pcie->bus_clk); + if (ret) + return ret; + + /* + * de-assert PCIe PARF reset; + * wait 1us before accessing PARF registers + */ + reset_control_deassert(qcom_pcie->ahb_reset); + udelay(1); + + /* enable PCIe clocks and resets */ + msm_pcie_write_mask(qcom_pcie->parf_base + PCIE20_PARF_PHY_CTRL, + BIT(0), 0); + + /* Set Tx Termination Offset */ + val = qcom_parf_readl_relaxed(qcom_pcie, PCIE20_PARF_PHY_CTRL); + val |= PCIE20_PARF_PHY_CTRL_PHY_TX0_TERM_OFFST(7); + qcom_parf_writel_relaxed(qcom_pcie, val, PCIE20_PARF_PHY_CTRL); + + /* PARF programming */ + qcom_parf_writel_relaxed(qcom_pcie, + PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | + PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | + PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), + PCIE20_PARF_PCS_DEEMPH); + qcom_parf_writel_relaxed(qcom_pcie, + PCIE20_PARF_PCS_SWING_TX_SWING_FULL(0x78) | + PCIE20_PARF_PCS_SWING_TX_SWING_LOW(0x78), + PCIE20_PARF_PCS_SWING); + qcom_parf_writel_relaxed(qcom_pcie, (4<<24), PCIE20_PARF_CONFIG_BITS); + /* ensure that hardware registers the PARF configuration */ + wmb(); + + /* enable reference clock */ + msm_pcie_write_mask(qcom_pcie->parf_base + PCIE20_PARF_PHY_REFCLK, + qcom_pcie->ext_phy_ref_clk ? 0 : BIT(12), + BIT(16)); + + /* ensure that access is enabled before proceeding */ + wmb(); + + /* de-assert PICe PHY, Core, POR and AXI clk domain resets */ + reset_control_deassert(qcom_pcie->phy_reset); + reset_control_deassert(qcom_pcie->pci_reset); + reset_control_deassert(qcom_pcie->por_reset); + reset_control_deassert(qcom_pcie->axi_reset); + + /* wait 150ms for clock acquisition */ + usleep_range(10000, 15000); + + /* de-assert PCIe reset link to bring EP out of reset */ + gpio_set_value(qcom_pcie->reset_gpio, 1); + usleep_range(10000, 15000); + + /* enable link training */ + val = qcom_elbi_readl_relaxed(qcom_pcie, PCIE20_ELBI_SYS_CTRL); + val |= PCIE20_ELBI_SYS_CTRL_LTSSM_EN; + qcom_elbi_writel_relaxed(qcom_pcie, val, PCIE20_ELBI_SYS_CTRL); + wmb(); + + /* poll for link to come up for upto 100ms */ + ret = readl_poll_timeout( + (qcom_pcie->dwc_base + PCIE20_CAP_LINKCTRLSTATUS), + val, (val & BIT(29)), 10000, 100000); + + dev_info(&pdev->dev, "link initialized %d\n", ret); + + qcom_pcie_config_controller(qcom_pcie); + + platform_set_drvdata(pdev, qcom_pcie); + + spin_lock_irqsave(&qcom_hw_pci_lock, flags); + qcom_hw_pci[nr_controllers].private_data = (void **)&qcom_pcie; + hw = &qcom_hw_pci[nr_controllers]; + +#ifdef CONFIG_PCI_MSI + hw->msi_ctrl = &qcom_pcie->msi.chip; +#endif + nr_controllers++; + spin_unlock_irqrestore(&qcom_hw_pci_lock, flags); + + ///pci_common_init(hw); + pci_common_init_dev(&pdev->dev, hw); + + msm_pcie_msi_init(qcom_pcie, pdev); + return 0; +} + +static int __exit qcom_pcie_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-ipq8064", }, + {} +}; + +static struct platform_driver qcom_pcie_driver = { + .probe = qcom_pcie_probe, + .remove = qcom_pcie_remove, + .driver = { + .name = "qcom_pcie", + .owner = THIS_MODULE, + .of_match_table = qcom_pcie_match, + }, +}; + +static int qcom_pcie_init(void) +{ + return platform_driver_register(&qcom_pcie_driver); +} +subsys_initcall_sync(qcom_pcie_init); + +/* RC do not represent the right class; set it to PCI_CLASS_BRIDGE_PCI */ +static void msm_pcie_fixup_early(struct pci_dev *dev) +{ + if (dev->hdr_type == 1) + dev->class = (dev->class & 0xff) | (PCI_CLASS_BRIDGE_PCI << 8); +} +DECLARE_PCI_FIXUP_EARLY(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, msm_pcie_fixup_early); diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index ea575f60f001..caeb402d9d50 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -68,4 +68,15 @@ config PINCTRL_QCOM_SPMI_PMIC which are using SPMI for communication with SoC. Example PMIC's devices are pm8841, pm8941 and pma8084. +config PINCTRL_SSBI_PMIC + tristate "Qualcomm SSBI PMIC pin controller driver" + depends on GPIOLIB && OF && MFD_PM8921_CORE + select PINCONF + select PINMUX + select GENERIC_PINCONF + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm GPIO blocks found in the pm8018, pm8038, pm8058, pm8917 and + pm8921 pmics from Qualcomm. + endif diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 68958702917d..b429c27348d9 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -8,3 +8,4 @@ obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o obj-$(CONFIG_PINCTRL_MSM8916) += pinctrl-msm8916.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o +obj-$(CONFIG_PINCTRL_SSBI_PMIC) += pinctrl-ssbi-pmic.o diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 0f11a26d932b..b2d22218a258 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -810,6 +810,7 @@ static int pmic_gpio_remove(struct platform_device *pdev) } static const struct of_device_id pmic_gpio_of_match[] = { + { .compatible = "qcom,pm8916-gpio" }, /* 4 GPIO's */ { .compatible = "qcom,pm8941-gpio" }, /* 36 GPIO's */ { .compatible = "qcom,pma8084-gpio" }, /* 22 GPIO's */ { }, diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index a8924dba335e..8f36c5f91949 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -925,6 +925,7 @@ static int pmic_mpp_remove(struct platform_device *pdev) static const struct of_device_id pmic_mpp_of_match[] = { { .compatible = "qcom,pm8841-mpp" }, /* 4 MPP's */ + { .compatible = "qcom,pm8916-mpp" }, /* 4 MPP's */ { .compatible = "qcom,pm8941-mpp" }, /* 8 MPP's */ { .compatible = "qcom,pma8084-mpp" }, /* 8 MPP's */ { }, diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-pmic.c b/drivers/pinctrl/qcom/pinctrl-ssbi-pmic.c new file mode 100644 index 000000000000..e02145e11baf --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-pmic.c @@ -0,0 +1,875 @@ +/* + * Copyright (c) 2014, Sony Mobile Communications AB. + * Copyright (c) 2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/gpio.h> +#include <linux/mfd/pm8921-core.h> + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "../core.h" +#include "../pinconf.h" +#include "../pinctrl-utils.h" + +/* direction */ +#define PM8XXX_GPIO_DIR_OUT BIT(0) +#define PM8XXX_GPIO_DIR_IN BIT(1) + +/* output buffer */ +#define PM8XXX_GPIO_PUSH_PULL 0 +#define PM8XXX_GPIO_OPEN_DRAIN 1 + +/* bias */ +#define PM8XXX_GPIO_BIAS_PU_30 0 +#define PM8XXX_GPIO_BIAS_PU_1P5 1 +#define PM8XXX_GPIO_BIAS_PU_31P5 2 +#define PM8XXX_GPIO_BIAS_PU_1P5_30 3 +#define PM8XXX_GPIO_BIAS_PD 4 +#define PM8XXX_GPIO_BIAS_NP 5 + +/* GPIO registers */ +#define SSBI_REG_ADDR_GPIO_BASE 0x150 +#define SSBI_REG_ADDR_GPIO(n) (SSBI_REG_ADDR_GPIO_BASE + n) + +#define PM8XXX_GPIO_MODE_ENABLE BIT(0) +#define PM8XXX_GPIO_WRITE BIT(7) + +#define PM8XXX_MAX_GPIOS 44 + +/* Qualcomm specific pin configurations */ +#define PM8XXX_PINCONF_PULL_UP (PIN_CONFIG_END + 1) +#define PM8XXX_PINCONF_STRENGTH (PIN_CONFIG_END + 2) + +struct pm8xxx_pinbindings { + const char *property; + unsigned param; + u32 default_value; +}; +static struct pm8xxx_pinbindings pm8xxx_pinbindings[] = { + /* PMIC_GPIO_PULL_UP_30... */ + {"qcom,pull-up-strength", PM8XXX_PINCONF_PULL_UP, 0}, + /* PMIC_GPIO_STRENGTH_NO... */ + {"qcom,drive-strength", PM8XXX_PINCONF_STRENGTH, 0}, +}; + +struct pm8xxx_gpio_pin { + int irq; + + u8 power_source; + u8 direction; + u8 output_buffer; + u8 output_value; + u8 bias; + u8 output_strength; + u8 disable; + u8 function; + u8 non_inverted; +}; + +struct pm8xxx_gpio_data { + int ngpio; +}; + +struct pm8xxx_gpio { + struct device *dev; + struct regmap *regmap; + struct pinctrl_dev *pctrl; + struct gpio_chip chip; + + const struct pm8xxx_gpio_data *data; + + struct pm8xxx_gpio_pin pins[PM8XXX_MAX_GPIOS]; +}; + +static inline struct pm8xxx_gpio *to_pm8xxx_gpio(struct gpio_chip *chip) +{ + return container_of(chip, struct pm8xxx_gpio, chip); +}; + +static const char * const pm8xxx_gpio_groups[PM8XXX_MAX_GPIOS] = { + "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", + "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", "gpio29", + "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43", + "gpio44", +}; + +static const char * const pm8xxx_gpio_functions[] = { + PMIC_GPIO_FUNC_NORMAL, PMIC_GPIO_FUNC_PAIRED, + PMIC_GPIO_FUNC_FUNC1, PMIC_GPIO_FUNC_FUNC2, + PMIC_GPIO_FUNC_DTEST1, PMIC_GPIO_FUNC_DTEST2, + PMIC_GPIO_FUNC_DTEST3, PMIC_GPIO_FUNC_DTEST4, +}; + +static int pm8xxx_gpio_read(struct pm8xxx_gpio *pctrl, int pin, int bank) +{ + int reg = SSBI_REG_ADDR_GPIO(pin); + unsigned int val = bank << 4; + int ret; + + ret = regmap_write(pctrl->regmap, reg, val); + if (ret) { + dev_err(pctrl->dev, + "failed to select bank %d of pin %d\n", bank, pin); + return ret; + } + + ret = regmap_read(pctrl->regmap, reg, &val); + if (ret) { + dev_err(pctrl->dev, + "failed to read register %d of pin %d\n", bank, pin); + return ret; + } + + return val; +} + +static int pm8xxx_gpio_write(struct pm8xxx_gpio *pctrl, + int pin, int bank, u8 val) +{ + int ret; + + val |= PM8XXX_GPIO_WRITE; + val |= bank << 4; + + ret = regmap_write(pctrl->regmap, SSBI_REG_ADDR_GPIO(pin), val); + if (ret) + dev_err(pctrl->dev, "failed to write register\n"); + + return ret; +} + +static int pm8xxx_gpio_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->data->ngpio; +} + +static const char *pm8xxx_gpio_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + return pm8xxx_gpio_groups[group]; +} + +static int pm8xxx_parse_dt_config(struct device *dev, struct device_node *np, + unsigned long **configs, unsigned int *nconfigs) +{ + struct pm8xxx_pinbindings *par; + unsigned long cfg[ARRAY_SIZE(pm8xxx_pinbindings)]; + unsigned int ncfg = 0; + int ret, idx; + u32 val; + + if (!np) + return -EINVAL; + + for (idx = 0; idx < ARRAY_SIZE(pm8xxx_pinbindings); idx++) { + par = &pm8xxx_pinbindings[idx]; + ret = of_property_read_u32(np, par->property, &val); + + /* property not found */ + if (ret == -EINVAL) + continue; + + /* use default value, when no value is specified */ + if (ret) + val = par->default_value; + + dev_dbg(dev, "found %s with value %u\n", par->property, val); + cfg[ncfg] = pinconf_to_config_packed(par->param, val); + ncfg++; + } + + ret = 0; + + /* no configs found at qchip->npads */ + if (ncfg == 0) { + *configs = NULL; + *nconfigs = 0; + goto out; + } + + /* + * Now limit the number of configs to the real number of + * found properties. + */ + *configs = kcalloc(ncfg, sizeof(unsigned long), GFP_KERNEL); + if (!*configs) { + ret = -ENOMEM; + goto out; + } + + memcpy(*configs, cfg, ncfg * sizeof(unsigned long)); + *nconfigs = ncfg; + +out: + return ret; +} + +static int pm8xxx_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *reserv, unsigned *nmaps, + enum pinctrl_map_type type) +{ + unsigned long *configs = NULL; + unsigned num_configs = 0; + struct property *prop; + const char *group; + int ret; + + ret = pm8xxx_parse_dt_config(pctldev->dev, np, &configs, &num_configs); + if (ret < 0) + return ret; + + if (!num_configs) + return 0; + + ret = of_property_count_strings(np, "pins"); + if (ret < 0) + goto exit; + + ret = pinctrl_utils_reserve_map(pctldev, map, reserv, + nmaps, ret); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "pins", prop, group) { + ret = pinctrl_utils_add_map_configs(pctldev, map, + reserv, nmaps, group, configs, + num_configs, type); + if (ret < 0) + break; + } +exit: + kfree(configs); + return ret; +} + +static int pm8xxx_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, + unsigned *nmaps) +{ + struct device_node *np; + enum pinctrl_map_type type; + unsigned reserv; + int ret; + + ret = 0; + *map = NULL; + *nmaps = 0; + reserv = 0; + type = PIN_MAP_TYPE_CONFIGS_GROUP; + + for_each_child_of_node(np_config, np) { + + ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map, + &reserv, nmaps, type); + if (ret) + break; + + ret = pm8xxx_dt_subnode_to_map(pctldev, np, map, &reserv, + nmaps, type); + if (ret) + break; + } + + if (ret < 0) + pinctrl_utils_dt_free_map(pctldev, *map, *nmaps); + + return ret; +} + +static const struct pinctrl_ops pm8xxx_gpio_pinctrl_ops = { + .get_groups_count = pm8xxx_gpio_get_groups_count, + .get_group_name = pm8xxx_gpio_get_group_name, + .dt_node_to_map = pm8xxx_dt_node_to_map, + .dt_free_map = pinctrl_utils_dt_free_map, +}; + +static int pm8xxx_get_functions_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(pm8xxx_gpio_functions); +} + +static const char *pm8xxx_get_function_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + return pm8xxx_gpio_functions[function]; +} + +static int pm8xxx_get_function_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pm8xxx_gpio_groups; + *num_groups = pctrl->data->ngpio; + return 0; +} + +static int pm8xxx_pinmux_enable(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[group]; + u8 val; + + pin->function = function; + val = pin->function << 1; + + pm8xxx_gpio_write(pctrl, group, 4, val); + + return 0; +} + +static const struct pinmux_ops pm8xxx_pinmux_ops = { + .get_functions_count = pm8xxx_get_functions_count, + .get_function_name = pm8xxx_get_function_name, + .get_function_groups = pm8xxx_get_function_groups, + .set_mux = pm8xxx_pinmux_enable, +}; + +static int pm8xxx_gpio_config_get(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *config) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + unsigned param = pinconf_to_config_param(*config); + unsigned arg; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + arg = pin->bias == PM8XXX_GPIO_BIAS_NP; + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + arg = pin->bias == PM8XXX_GPIO_BIAS_PD; + break; + case PM8XXX_PINCONF_PULL_UP: + if (pin->bias >= PM8XXX_GPIO_BIAS_PU_30 && + pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30) + arg = PMIC_GPIO_PULL_UP_30 + pin->bias; + else + arg = 0; + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + arg = pin->disable; + break; + case PIN_CONFIG_INPUT_ENABLE: + arg = pin->direction == PM8XXX_GPIO_DIR_IN; + break; + case PIN_CONFIG_OUTPUT: + arg = pin->output_value; + break; + case PIN_CONFIG_POWER_SOURCE: + arg = pin->power_source; + break; + case PM8XXX_PINCONF_STRENGTH: + arg = pin->output_strength; + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + arg = pin->output_buffer == PM8XXX_GPIO_PUSH_PULL; + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + arg = pin->output_buffer == PM8XXX_GPIO_OPEN_DRAIN; + break; + default: + dev_err(pctrl->dev, + "unsupported config parameter: %x\n", + param); + return -EINVAL; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +} + +static int pm8xxx_gpio_config_set(struct pinctrl_dev *pctldev, + unsigned int offset, + unsigned long *configs, + unsigned num_configs) +{ + struct pm8xxx_gpio *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + unsigned param; + unsigned arg; + unsigned i; + u8 banks = 0; + u8 val; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + pin->bias = PM8XXX_GPIO_BIAS_NP; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + pin->bias = PM8XXX_GPIO_BIAS_PD; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PM8XXX_PINCONF_PULL_UP: + if (arg < PMIC_GPIO_PULL_UP_30 || + arg > PMIC_GPIO_PULL_UP_1P5_30) { + dev_err(pctrl->dev, "invalid pull-up level\n"); + return -EINVAL; + } + pin->bias = arg - PM8XXX_GPIO_BIAS_PU_30; + banks |= BIT(2); + pin->disable = 0; + banks |= BIT(3); + break; + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: + pin->disable = 1; + banks |= BIT(3); + break; + case PIN_CONFIG_INPUT_ENABLE: + pin->direction = PM8XXX_GPIO_DIR_IN; + banks |= BIT(1); + break; + case PIN_CONFIG_OUTPUT: + pin->direction = PM8XXX_GPIO_DIR_OUT; + pin->output_value = !!arg; + banks |= BIT(1); + break; + case PIN_CONFIG_POWER_SOURCE: + pin->power_source = arg; + banks |= BIT(0); + break; + case PM8XXX_PINCONF_STRENGTH: + if (arg > PMIC_GPIO_STRENGTH_LOW) { + dev_err(pctrl->dev, "invalid drive strength\n"); + return -EINVAL; + } + pin->output_strength = arg; + banks |= BIT(3); + break; + case PIN_CONFIG_DRIVE_PUSH_PULL: + pin->output_buffer = PM8XXX_GPIO_PUSH_PULL; + banks |= BIT(1); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + pin->output_buffer = PM8XXX_GPIO_OPEN_DRAIN; + banks |= BIT(1); + break; + default: + dev_err(pctrl->dev, + "unsupported config parameter: %x\n", + param); + return -EINVAL; + } + } + + if (banks & BIT(0)) + pm8xxx_gpio_write(pctrl, offset, 0, pin->power_source << 1 | + PM8XXX_GPIO_MODE_ENABLE); + + if (banks & BIT(1)) { + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + pm8xxx_gpio_write(pctrl, offset, 1, val); + } + + if (banks & BIT(2)) { + val = pin->bias << 1; + pm8xxx_gpio_write(pctrl, offset, 2, val); + } + + if (banks & BIT(3)) { + val = pin->output_strength << 2; + val |= pin->disable; + pm8xxx_gpio_write(pctrl, offset, 3, val); + } + + if (banks & BIT(4)) { + val = pin->function << 1; + pm8xxx_gpio_write(pctrl, offset, 4, val); + } + + if (banks & BIT(5)) { + val = 0; + if (pin->non_inverted) + val |= BIT(3); + pm8xxx_gpio_write(pctrl, offset, 5, val); + } + + return 0; +} + +static const struct pinconf_ops pm8xxx_gpio_pinconf_ops = { + .pin_config_group_get = pm8xxx_gpio_config_get, + .pin_config_group_set = pm8xxx_gpio_config_set, +}; + +static struct pinctrl_desc pm8xxx_gpio_desc = { + .pctlops = &pm8xxx_gpio_pinctrl_ops, + .pmxops = &pm8xxx_pinmux_ops, + .confops = &pm8xxx_gpio_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int pm8xxx_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->direction = PM8XXX_GPIO_DIR_IN; + val = pin->direction << 2; + + pm8xxx_gpio_write(pctrl, offset, 1, val); + + return 0; +} + +static int pm8xxx_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, + int value) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->direction = PM8XXX_GPIO_DIR_OUT; + pin->output_value = !!value; + + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + + pm8xxx_gpio_write(pctrl, offset, 1, val); + + return 0; +} + +static int pm8xxx_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + + if (pin->direction == PM8XXX_GPIO_DIR_OUT) + return pin->output_value; + + return pm8xxx_read_irq_status(pin->irq); +} + +static void pm8xxx_gpio_set(struct gpio_chip *gc, unsigned offset, int value) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(gc); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + u8 val; + + pin->output_value = !!value; + + val = pin->direction << 2; + val |= pin->output_buffer << 1; + val |= pin->output_value; + + pm8xxx_gpio_write(pctrl, offset, 1, val); +} + +static int pm8xxx_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset - 1]; + + return pin->irq; +} + +#ifdef CONFIG_DEBUG_FS +#include <linux/seq_file.h> + +static void pm8xxx_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, + unsigned gpio) +{ + struct pm8xxx_gpio *pctrl = to_pm8xxx_gpio(chip); + struct pm8xxx_gpio_pin *pin = &pctrl->pins[offset]; + + static const char * const directions[] = { + "off", "out", "in", "both" + }; + static const char * const biases[] = { + "pull-up 30uA", "pull-up 1.5uA", "pull-up 31.5uA", + "pull-up 1.5uA + 30uA boost", "pull-down 10uA", "no pull" + }; + static const char * const buffer_types[] = { + "push-pull", "open-drain" + }; + static const char * const strengths[] = { + "no", "high", "medium", "low" + }; + + seq_printf(s, " gpio%-2d:", offset + 1); + if (pin->disable) { + seq_puts(s, " ---"); + } else { + seq_printf(s, " %-4s", directions[pin->direction]); + seq_printf(s, " %-7s", pm8xxx_gpio_functions[pin->function]); + seq_printf(s, " VIN%d", pin->power_source); + seq_printf(s, " %-27s", biases[pin->bias]); + seq_printf(s, " %-10s", buffer_types[pin->output_buffer]); + seq_printf(s, " %-4s", pin->output_value ? "high" : "low"); + seq_printf(s, " %-7s", strengths[pin->output_strength]); + if (!pin->non_inverted) + seq_puts(s, " inverted"); + } +} + +static void pm8xxx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned gpio = chip->base; + unsigned i; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + pm8xxx_gpio_dbg_show_one(s, NULL, chip, i, gpio); + seq_puts(s, "\n"); + } +} + +#else +#define msm_gpio_dbg_show NULL +#endif + +static struct gpio_chip pm8xxx_gpio_template = { + .direction_input = pm8xxx_gpio_direction_input, + .direction_output = pm8xxx_gpio_direction_output, + .get = pm8xxx_gpio_get, + .set = pm8xxx_gpio_set, + .to_irq = pm8xxx_gpio_to_irq, + .dbg_show = pm8xxx_gpio_dbg_show, + .owner = THIS_MODULE, +}; + +static int pm8xxx_gpio_populate(struct pm8xxx_gpio *pctrl) +{ + struct pm8xxx_gpio_pin *pin; + int val; + int i; + + for (i = 0; i < pctrl->data->ngpio; i++) { + pin = &pctrl->pins[i]; + + val = pm8xxx_gpio_read(pctrl, i, 0); + if (val < 0) + return val; + + pin->power_source = (val >> 1) & 0x7; + + val = pm8xxx_gpio_read(pctrl, i, 1); + if (val < 0) + return val; + + pin->direction = (val >> 2) & 0x3; + pin->output_buffer = !!(val & BIT(1)); + pin->output_value = val & BIT(0); + + val = pm8xxx_gpio_read(pctrl, i, 2); + if (val < 0) + return val; + + pin->bias = (val >> 1) & 0x7; + + val = pm8xxx_gpio_read(pctrl, i, 3); + if (val < 0) + return val; + + pin->output_strength = (val >> 2) & 0x3; + pin->disable = val & BIT(0); + + val = pm8xxx_gpio_read(pctrl, i, 4); + if (val < 0) + return val; + + pin->function = (val >> 1) & 0x7; + + val = pm8xxx_gpio_read(pctrl, i, 5); + if (val < 0) + return val; + + pin->non_inverted = !!(val & BIT(3)); + } + + return 0; +} + +static const struct pm8xxx_gpio_data pm8018_gpio_data = { + .ngpio = 6, +}; + +static const struct pm8xxx_gpio_data pm8038_gpio_data = { + .ngpio = 12, +}; + +static const struct pm8xxx_gpio_data pm8058_gpio_data = { + .ngpio = 40, +}; +static const struct pm8xxx_gpio_data pm8917_gpio_data = { + .ngpio = 38, +}; + +static const struct pm8xxx_gpio_data pm8921_gpio_data = { + .ngpio = 44, +}; + +static const struct of_device_id pm8xxx_gpio_of_match[] = { + { .compatible = "qcom,pm8018-gpio", .data = &pm8018_gpio_data }, + { .compatible = "qcom,pm8038-gpio", .data = &pm8038_gpio_data }, + { .compatible = "qcom,pm8058-gpio", .data = &pm8058_gpio_data }, + { .compatible = "qcom,pm8917-gpio", .data = &pm8917_gpio_data }, + { .compatible = "qcom,pm8921-gpio", .data = &pm8921_gpio_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, pm8xxx_gpio_of_match); + +static int pm8xxx_gpio_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct pm8xxx_gpio *pctrl; + int ret; + int i; + + match = of_match_node(pm8xxx_gpio_of_match, pdev->dev.of_node); + if (!match) + return -ENXIO; + + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->dev = &pdev->dev; + pctrl->data = match->data; + + BUG_ON(pctrl->data->ngpio > PM8XXX_MAX_GPIOS); + + pctrl->chip = pm8xxx_gpio_template; + pctrl->chip.base = -1; + pctrl->chip.dev = &pdev->dev; + pctrl->chip.of_node = pdev->dev.of_node; + pctrl->chip.label = dev_name(pctrl->dev); + pctrl->chip.ngpio = pctrl->data->ngpio; + + pctrl->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pctrl->regmap) { + dev_err(&pdev->dev, "parent regmap unavailable\n"); + return -ENXIO; + } + + for (i = 0; i < pctrl->data->ngpio; i++) { + ret = platform_get_irq(pdev, i); + if (ret < 0) { + dev_err(&pdev->dev, + "missing interrupts for pin %d\n", i); + return ret; + } + + pctrl->pins[i].irq = ret; + } + + ret = pm8xxx_gpio_populate(pctrl); + if (ret) + return ret; + + pm8xxx_gpio_desc.name = dev_name(&pdev->dev); + pctrl->pctrl = pinctrl_register(&pm8xxx_gpio_desc, &pdev->dev, pctrl); + if (!pctrl->pctrl) { + dev_err(&pdev->dev, "couldn't register pm8xxx gpio driver\n"); + return -ENODEV; + } + + ret = gpiochip_add(&pctrl->chip); + if (ret) { + dev_err(&pdev->dev, "failed register gpiochip\n"); + goto unregister_pinctrl; + } + + ret = gpiochip_add_pin_range(&pctrl->chip, + dev_name(pctrl->dev), + 1, 0, pctrl->data->ngpio); + if (ret) { + dev_err(pctrl->dev, "failed to add pin range\n"); + goto unregister_gpiochip; + } + + platform_set_drvdata(pdev, pctrl); + + dev_dbg(&pdev->dev, "Qualcomm pm8xxx gpio driver probed\n"); + + return 0; + +unregister_pinctrl: + pinctrl_unregister(pctrl->pctrl); + +unregister_gpiochip: + gpiochip_remove(&pctrl->chip); + + return ret; +} + +static int pm8xxx_gpio_remove(struct platform_device *pdev) +{ + struct pm8xxx_gpio *pctrl = platform_get_drvdata(pdev); + + gpiochip_remove(&pctrl->chip); + + pinctrl_unregister(pctrl->pctrl); + + return 0; +} + +static struct platform_driver pm8xxx_gpio_driver = { + .driver = { + .name = "ssbi-pmic-gpio", + .owner = THIS_MODULE, + .of_match_table = pm8xxx_gpio_of_match, + }, + .probe = pm8xxx_gpio_probe, + .remove = pm8xxx_gpio_remove, +}; + +static int pm8xxx_gpio_init(void) +{ + return platform_driver_register(&pm8xxx_gpio_driver); +} +subsys_initcall(pm8xxx_gpio_init); + +MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); +MODULE_DESCRIPTION("Qualcomm SSBI PMIC GPIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 93ce2a25f3c5..47b0e4180845 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -9,6 +9,14 @@ config QCOM_GSBI functions for connecting the underlying serial UART, SPI, and I2C devices to the output pins. +config QCOM_PM + bool "Qualcomm Power Management" + depends on ARCH_QCOM + help + QCOM Platform specific power driver to manage cores and L2 low power + modes. It interface with various system drivers to put the cores in + low power modes. + config MSM_SMD depends on MSM_SMEM bool "MSM Shared Memory Driver (SMD)" diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index 7dc1de1c3852..bc9dc1fdd137 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o +obj-$(CONFIG_QCOM_PM) += spm.o obj-$(CONFIG_MSM_RPM_SMD) += rpm-smd.o ifdef CONFIG_DEBUG_FS obj-$(CONFIG_MSM_RPM_SMD) += rpm-smd-debug.o diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c new file mode 100644 index 000000000000..b562af816c0a --- /dev/null +++ b/drivers/soc/qcom/spm.c @@ -0,0 +1,385 @@ +/* + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2014,2015, Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/cpuidle.h> +#include <linux/cpu_pm.h> +#include <linux/qcom_scm.h> + +#include <asm/cpuidle.h> +#include <asm/proc-fns.h> +#include <asm/suspend.h> + +#define MAX_PMIC_DATA 2 +#define MAX_SEQ_DATA 64 +#define SPM_CTL_INDEX 0x7f +#define SPM_CTL_INDEX_SHIFT 4 +#define SPM_CTL_EN BIT(0) + +enum pm_sleep_mode { + PM_SLEEP_MODE_STBY, + PM_SLEEP_MODE_RET, + PM_SLEEP_MODE_SPC, + PM_SLEEP_MODE_PC, + PM_SLEEP_MODE_NR, +}; + +enum spm_reg { + SPM_REG_CFG, + SPM_REG_SPM_CTL, + SPM_REG_DLY, + SPM_REG_PMIC_DLY, + SPM_REG_PMIC_DATA_0, + SPM_REG_PMIC_DATA_1, + SPM_REG_VCTL, + SPM_REG_SEQ_ENTRY, + SPM_REG_SPM_STS, + SPM_REG_PMIC_STS, + SPM_REG_NR, +}; + +struct spm_reg_data { + const u8 *reg_offset; + u32 spm_cfg; + u32 spm_dly; + u32 pmic_dly; + u32 pmic_data[MAX_PMIC_DATA]; + u8 seq[MAX_SEQ_DATA]; + u8 start_index[PM_SLEEP_MODE_NR]; +}; + +struct spm_driver_data { + void __iomem *reg_base; + const struct spm_reg_data *reg_data; +}; + +static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x30, + [SPM_REG_DLY] = 0x34, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8974, 8084 */ +static const struct spm_reg_data spm_reg_8974_8084_cpu = { + .reg_offset = spm_reg_offset_v2_1, + .spm_cfg = 0x1, + .spm_dly = 0x3C102800, + .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03, + 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30, + 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 3, +}; + +static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = { + [SPM_REG_CFG] = 0x08, + [SPM_REG_SPM_CTL] = 0x20, + [SPM_REG_PMIC_DLY] = 0x24, + [SPM_REG_PMIC_DATA_0] = 0x28, + [SPM_REG_PMIC_DATA_1] = 0x2C, + [SPM_REG_SEQ_ENTRY] = 0x80, +}; + +/* SPM register data for 8064 */ +static const struct spm_reg_data spm_reg_8064_cpu = { + .reg_offset = spm_reg_offset_v1_1, + .spm_cfg = 0x1F, + .pmic_dly = 0x02020004, + .pmic_data[0] = 0x0084009C, + .pmic_data[1] = 0x00A4001C, + .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01, + 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F }, + .start_index[PM_SLEEP_MODE_STBY] = 0, + .start_index[PM_SLEEP_MODE_SPC] = 2, +}; + +static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv); + +typedef int (*idle_fn)(int); +static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops); + +static inline void spm_register_write(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + if (drv->reg_data->reg_offset[reg]) + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); +} + +/* Ensure a guaranteed write, before return */ +static inline void spm_register_write_sync(struct spm_driver_data *drv, + enum spm_reg reg, u32 val) +{ + u32 ret; + + if (!drv->reg_data->reg_offset[reg]) + return; + + do { + writel_relaxed(val, drv->reg_base + + drv->reg_data->reg_offset[reg]); + ret = readl_relaxed(drv->reg_base + + drv->reg_data->reg_offset[reg]); + if (ret == val) + break; + cpu_relax(); + } while (1); +} + +static inline u32 spm_register_read(struct spm_driver_data *drv, + enum spm_reg reg) +{ + return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]); +} + +static void spm_set_low_power_mode(struct spm_driver_data *drv, + enum pm_sleep_mode mode) +{ + u32 start_index; + u32 ctl_val; + + start_index = drv->reg_data->start_index[mode]; + + ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL); + ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT); + ctl_val |= start_index << SPM_CTL_INDEX_SHIFT; + ctl_val |= SPM_CTL_EN; + spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val); +} + +static int qcom_pm_collapse(unsigned long int unused) +{ + qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON); + + /* + * Returns here only if there was a pending interrupt and we did not + * power down as a result. + */ + return -1; +} + +static int qcom_cpu_spc(int cpu) +{ + int ret; + struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu); + + spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC); + ret = cpu_suspend(0, qcom_pm_collapse); + /* + * ARM common code executes WFI without calling into our driver and + * if the SPM mode is not reset, then we may accidently power down the + * cpu when we intended only to gate the cpu clock. + * Ensure the state is set to standby before returning. + */ + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); + + return ret; +} + +static int qcom_idle_enter(int cpu, unsigned long index) +{ + return per_cpu(qcom_idle_ops, cpu)[index](cpu); +} + +static const struct of_device_id qcom_idle_state_match[] __initconst = { + { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc }, + { }, +}; + +static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu) +{ + const struct of_device_id *match_id; + struct device_node *state_node; + int i; + int state_count = 1; + idle_fn idle_fns[CPUIDLE_STATE_MAX]; + idle_fn *fns; + cpumask_t mask; + bool use_scm_power_down = false; + + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) + break; + + if (!of_device_is_available(state_node)) + continue; + + if (i == CPUIDLE_STATE_MAX) { + pr_warn("%s: cpuidle states reached max possible\n", + __func__); + break; + } + + match_id = of_match_node(qcom_idle_state_match, state_node); + if (!match_id) + return -ENODEV; + + idle_fns[state_count] = match_id->data; + + /* Check if any of the states allow power down */ + if (match_id->data == qcom_cpu_spc) + use_scm_power_down = true; + + state_count++; + } + + if (state_count == 1) + goto check_spm; + + fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns), + GFP_KERNEL); + if (!fns) + return -ENOMEM; + + for (i = 1; i < state_count; i++) + fns[i] = idle_fns[i]; + + if (use_scm_power_down) { + /* We have atleast one power down mode */ + cpumask_clear(&mask); + cpumask_set_cpu(cpu, &mask); + qcom_scm_set_warm_boot_addr(cpu_resume, &mask); + } + + per_cpu(qcom_idle_ops, cpu) = fns; + + /* + * SPM probe for the cpu should have happened by now, if the + * SPM device does not exist, return -ENXIO to indicate that the + * cpu does not support idle states. + */ +check_spm: + return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO; +} + +static struct cpuidle_ops qcom_cpuidle_ops __initdata = { + .suspend = qcom_idle_enter, + .init = qcom_cpuidle_init, +}; + +CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops); +CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops); + +static struct spm_driver_data *spm_get_drv(struct platform_device *pdev, + int *spm_cpu) +{ + struct spm_driver_data *drv = NULL; + struct device_node *cpu_node, *saw_node; + int cpu; + bool found; + + for_each_possible_cpu(cpu) { + cpu_node = of_cpu_device_node_get(cpu); + if (!cpu_node) + continue; + saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); + found = (saw_node == pdev->dev.of_node); + of_node_put(saw_node); + of_node_put(cpu_node); + if (found) + break; + } + + if (found) { + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); + if (drv) + *spm_cpu = cpu; + } + + return drv; +} + +static const struct of_device_id spm_match_table[] = { + { .compatible = "qcom,msm8974-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8084-saw2-v2.1-cpu", + .data = &spm_reg_8974_8084_cpu }, + { .compatible = "qcom,apq8064-saw2-v1.1-cpu", + .data = &spm_reg_8064_cpu }, + { }, +}; + +static int spm_dev_probe(struct platform_device *pdev) +{ + struct spm_driver_data *drv; + struct resource *res; + const struct of_device_id *match_id; + void __iomem *addr; + int cpu; + + drv = spm_get_drv(pdev, &cpu); + if (!drv) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(drv->reg_base)) + return PTR_ERR(drv->reg_base); + + match_id = of_match_node(spm_match_table, pdev->dev.of_node); + if (!match_id) + return -ENODEV; + + drv->reg_data = match_id->data; + + /* Write the SPM sequences first.. */ + addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY]; + __iowrite32_copy(addr, drv->reg_data->seq, + ARRAY_SIZE(drv->reg_data->seq) / 4); + + /* + * ..and then the control registers. + * On some SoC if the control registers are written first and if the + * CPU was held in reset, the reset signal could trigger the SPM state + * machine, before the sequences are completely written. + */ + spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg); + spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly); + spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly); + spm_register_write(drv, SPM_REG_PMIC_DATA_0, + drv->reg_data->pmic_data[0]); + spm_register_write(drv, SPM_REG_PMIC_DATA_1, + drv->reg_data->pmic_data[1]); + + /* Set up Standby as the default low power mode */ + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY); + + per_cpu(cpu_spm_drv, cpu) = drv; + + return 0; +} + +static struct platform_driver spm_driver = { + .probe = spm_dev_probe, + .driver = { + .name = "saw", + .of_match_table = spm_match_table, + }, +}; +module_platform_driver(spm_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SAW power controller driver"); +MODULE_ALIAS("platform:saw"); diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index bf1295e19f89..c8d99563d245 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -12,7 +12,6 @@ if SPMI config SPMI_MSM_PMIC_ARB tristate "Qualcomm MSM SPMI Controller (PMIC Arbiter)" - depends on ARM depends on IRQ_DOMAIN depends on ARCH_QCOM || COMPILE_TEST default ARCH_QCOM diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 20559ab3466d..d7119db49cfe 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -1,4 +1,5 @@ -/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -25,22 +26,18 @@ /* PMIC Arbiter configuration registers */ #define PMIC_ARB_VERSION 0x0000 +#define PMIC_ARB_VERSION_V2_MIN 0x20010000 #define PMIC_ARB_INT_EN 0x0004 -/* PMIC Arbiter channel registers */ -#define PMIC_ARB_CMD(N) (0x0800 + (0x80 * (N))) -#define PMIC_ARB_CONFIG(N) (0x0804 + (0x80 * (N))) -#define PMIC_ARB_STATUS(N) (0x0808 + (0x80 * (N))) -#define PMIC_ARB_WDATA0(N) (0x0810 + (0x80 * (N))) -#define PMIC_ARB_WDATA1(N) (0x0814 + (0x80 * (N))) -#define PMIC_ARB_RDATA0(N) (0x0818 + (0x80 * (N))) -#define PMIC_ARB_RDATA1(N) (0x081C + (0x80 * (N))) - -/* Interrupt Controller */ -#define SPMI_PIC_OWNER_ACC_STATUS(M, N) (0x0000 + ((32 * (M)) + (4 * (N)))) -#define SPMI_PIC_ACC_ENABLE(N) (0x0200 + (4 * (N))) -#define SPMI_PIC_IRQ_STATUS(N) (0x0600 + (4 * (N))) -#define SPMI_PIC_IRQ_CLEAR(N) (0x0A00 + (4 * (N))) +/* PMIC Arbiter channel registers offsets */ +#define PMIC_ARB_CMD 0x00 +#define PMIC_ARB_CONFIG 0x04 +#define PMIC_ARB_STATUS 0x08 +#define PMIC_ARB_WDATA0 0x10 +#define PMIC_ARB_WDATA1 0x14 +#define PMIC_ARB_RDATA0 0x18 +#define PMIC_ARB_RDATA1 0x1C +#define PMIC_ARB_REG_CHNL(N) (0x800 + 0x4 * (N)) /* Mapping Table */ #define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N))) @@ -52,6 +49,7 @@ #define SPMI_MAPPING_TABLE_LEN 255 #define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */ +#define PPID_TO_CHAN_TABLE_SZ BIT(12) /* PPID is 12bit chan is 1byte*/ /* Ownership Table */ #define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N))) @@ -88,6 +86,7 @@ enum pmic_arb_cmd_op_code { /* Maximum number of support PMIC peripherals */ #define PMIC_ARB_MAX_PERIPHS 256 +#define PMIC_ARB_MAX_CHNL 128 #define PMIC_ARB_PERIPH_ID_VALID (1 << 15) #define PMIC_ARB_TIMEOUT_US 100 #define PMIC_ARB_MAX_TRANS_BYTES (8) @@ -98,14 +97,17 @@ enum pmic_arb_cmd_op_code { /* interrupt enable bit */ #define SPMI_PIC_ACC_ENABLE_BIT BIT(0) +struct pmic_arb_ver_ops; + /** * spmi_pmic_arb_dev - SPMI PMIC Arbiter object * - * @base: address of the PMIC Arbiter core registers. + * @rd_base: on v1 "core", on v2 "observer" register base off DT. + * @wr_base: on v1 "core", on v2 "chnls" register base off DT. * @intr: address of the SPMI interrupt control registers. * @cnfg: address of the PMIC Arbiter configuration registers. * @lock: lock to synchronize accesses. - * @channel: which channel to use for accesses. + * @channel: execution environment channel to use for accesses. * @irq: PMIC ARB interrupt. * @ee: the current Execution Environment * @min_apid: minimum APID (used for bounding IRQ search) @@ -113,10 +115,14 @@ enum pmic_arb_cmd_op_code { * @mapping_table: in-memory copy of PPID -> APID mapping table. * @domain: irq domain object for PMIC IRQ domain * @spmic: SPMI controller object - * @apid_to_ppid: cached mapping from APID to PPID + * @apid_to_ppid: in-memory copy of APID -> PPID mapping table. + * @ver_ops: version dependent operations. + * @ppid_to_chan in-memory copy of PPID -> channel (APID) mapping table. + * v2 only. */ struct spmi_pmic_arb_dev { - void __iomem *base; + void __iomem *rd_base; + void __iomem *wr_base; void __iomem *intr; void __iomem *cnfg; raw_spinlock_t lock; @@ -129,17 +135,54 @@ struct spmi_pmic_arb_dev { struct irq_domain *domain; struct spmi_controller *spmic; u16 apid_to_ppid[256]; + const struct pmic_arb_ver_ops *ver_ops; + u8 *ppid_to_chan; +}; + +/** + * pmic_arb_ver: version dependent functionality. + * + * @non_data_cmd: on v1 issues an spmi non-data command. + * on v2 no HW support, returns -EOPNOTSUPP. + * @offset: on v1 offset of per-ee channel. + * on v2 offset of per-ee and per-ppid channel. + * @fmt_cmd: formats a GENI/SPMI command. + * @owner_acc_status: on v1 offset of PMIC_ARB_SPMI_PIC_OWNERm_ACC_STATUSn + * on v2 offset of SPMI_PIC_OWNERm_ACC_STATUSn. + * @acc_enable: on v1 offset of PMIC_ARB_SPMI_PIC_ACC_ENABLEn + * on v2 offset of SPMI_PIC_ACC_ENABLEn. + * @irq_status: on v1 offset of PMIC_ARB_SPMI_PIC_IRQ_STATUSn + * on v2 offset of SPMI_PIC_IRQ_STATUSn. + * @irq_clear: on v1 offset of PMIC_ARB_SPMI_PIC_IRQ_CLEARn + * on v2 offset of SPMI_PIC_IRQ_CLEARn. + */ +struct pmic_arb_ver_ops { + /* spmi commands (read_cmd, write_cmd, cmd) functionality */ + u32 (*offset)(struct spmi_pmic_arb_dev *dev, u8 sid, u16 addr); + u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc); + int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid); + /* Interrupts controller functionality (offset of PIC registers) */ + u32 (*owner_acc_status)(u8 m, u8 n); + u32 (*acc_enable)(u8 n); + u32 (*irq_status)(u8 n); + u32 (*irq_clear)(u8 n); }; static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset) { - return readl_relaxed(dev->base + offset); + return readl_relaxed(dev->rd_base + offset); } static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev, u32 offset, u32 val) { - writel_relaxed(val, dev->base + offset); + writel_relaxed(val, dev->wr_base + offset); +} + +static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb_dev *dev, + u32 offset, u32 val) +{ + writel_relaxed(val, dev->rd_base + offset); } /** @@ -168,15 +211,16 @@ pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc) pmic_arb_base_write(dev, reg, data); } -static int pmic_arb_wait_for_done(struct spmi_controller *ctrl) +static int pmic_arb_wait_for_done(struct spmi_controller *ctrl, + void __iomem *base, u8 sid, u16 addr) { struct spmi_pmic_arb_dev *dev = spmi_controller_get_drvdata(ctrl); u32 status = 0; u32 timeout = PMIC_ARB_TIMEOUT_US; - u32 offset = PMIC_ARB_STATUS(dev->channel); + u32 offset = dev->ver_ops->offset(dev, sid, addr) + PMIC_ARB_STATUS; while (timeout--) { - status = pmic_arb_base_read(dev, offset); + status = readl_relaxed(base + offset); if (status & PMIC_ARB_STATUS_DONE) { if (status & PMIC_ARB_STATUS_DENIED) { @@ -211,28 +255,45 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl) return -ETIMEDOUT; } -/* Non-data command */ -static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) +static int +pmic_arb_non_data_cmd_v1(struct spmi_controller *ctrl, u8 opc, u8 sid) { struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl); unsigned long flags; u32 cmd; int rc; - - /* Check for valid non-data command */ - if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) - return -EINVAL; + u32 offset = pmic_arb->ver_ops->offset(pmic_arb, sid, 0); cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20); raw_spin_lock_irqsave(&pmic_arb->lock, flags); - pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); - rc = pmic_arb_wait_for_done(ctrl); + pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd); + rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, 0); raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); return rc; } +static int +pmic_arb_non_data_cmd_v2(struct spmi_controller *ctrl, u8 opc, u8 sid) +{ + return -EOPNOTSUPP; +} + +/* Non-data command */ +static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid) +{ + struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl); + + dev_dbg(&ctrl->dev, "cmd op:0x%x sid:%d\n", opc, sid); + + /* Check for valid non-data command */ + if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP) + return -EINVAL; + + return pmic_arb->ver_ops->non_data_cmd(ctrl, opc, sid); +} + static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, u16 addr, u8 *buf, size_t len) { @@ -241,10 +302,11 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, u8 bc = len - 1; u32 cmd; int rc; + u32 offset = pmic_arb->ver_ops->offset(pmic_arb, sid, addr); if (bc >= PMIC_ARB_MAX_TRANS_BYTES) { dev_err(&ctrl->dev, - "pmic-arb supports 1..%d bytes per trans, but %d requested", + "pmic-arb supports 1..%d bytes per trans, but:%zu requested", PMIC_ARB_MAX_TRANS_BYTES, len); return -EINVAL; } @@ -259,20 +321,20 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, else return -EINVAL; - cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7); + cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc); raw_spin_lock_irqsave(&pmic_arb->lock, flags); - pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); - rc = pmic_arb_wait_for_done(ctrl); + pmic_arb_set_rd_cmd(pmic_arb, offset + PMIC_ARB_CMD, cmd); + rc = pmic_arb_wait_for_done(ctrl, pmic_arb->rd_base, sid, addr); if (rc) goto done; - pa_read_data(pmic_arb, buf, PMIC_ARB_RDATA0(pmic_arb->channel), + pa_read_data(pmic_arb, buf, offset + PMIC_ARB_RDATA0, min_t(u8, bc, 3)); if (bc > 3) pa_read_data(pmic_arb, buf + 4, - PMIC_ARB_RDATA1(pmic_arb->channel), bc - 4); + offset + PMIC_ARB_RDATA1, bc - 4); done: raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); @@ -287,10 +349,11 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, u8 bc = len - 1; u32 cmd; int rc; + u32 offset = pmic_arb->ver_ops->offset(pmic_arb, sid, addr); if (bc >= PMIC_ARB_MAX_TRANS_BYTES) { dev_err(&ctrl->dev, - "pmic-arb supports 1..%d bytes per trans, but:%d requested", + "pmic-arb supports 1..%d bytes per trans, but:%zu requested", PMIC_ARB_MAX_TRANS_BYTES, len); return -EINVAL; } @@ -307,19 +370,19 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid, else return -EINVAL; - cmd = (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7); + cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc); /* Write data to FIFOs */ raw_spin_lock_irqsave(&pmic_arb->lock, flags); - pa_write_data(pmic_arb, buf, PMIC_ARB_WDATA0(pmic_arb->channel) - , min_t(u8, bc, 3)); + pa_write_data(pmic_arb, buf, offset + PMIC_ARB_WDATA0, + min_t(u8, bc, 3)); if (bc > 3) pa_write_data(pmic_arb, buf + 4, - PMIC_ARB_WDATA1(pmic_arb->channel), bc - 4); + offset + PMIC_ARB_WDATA1, bc - 4); /* Start the transaction */ - pmic_arb_base_write(pmic_arb, PMIC_ARB_CMD(pmic_arb->channel), cmd); - rc = pmic_arb_wait_for_done(ctrl); + pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd); + rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, addr); raw_spin_unlock_irqrestore(&pmic_arb->lock, flags); return rc; @@ -376,7 +439,7 @@ static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid) u32 status; int id; - status = readl_relaxed(pa->intr + SPMI_PIC_IRQ_STATUS(apid)); + status = readl_relaxed(pa->intr + pa->ver_ops->irq_status(apid)); while (status) { id = ffs(status) - 1; status &= ~(1 << id); @@ -402,7 +465,7 @@ static void pmic_arb_chained_irq(unsigned int irq, struct irq_desc *desc) for (i = first; i <= last; ++i) { status = readl_relaxed(intr + - SPMI_PIC_OWNER_ACC_STATUS(pa->ee, i)); + pa->ver_ops->owner_acc_status(pa->ee, i)); while (status) { id = ffs(status) - 1; status &= ~(1 << id); @@ -422,7 +485,7 @@ static void qpnpint_irq_ack(struct irq_data *d) u8 data; raw_spin_lock_irqsave(&pa->lock, flags); - writel_relaxed(1 << irq, pa->intr + SPMI_PIC_IRQ_CLEAR(apid)); + writel_relaxed(1 << irq, pa->intr + pa->ver_ops->irq_clear(apid)); raw_spin_unlock_irqrestore(&pa->lock, flags); data = 1 << irq; @@ -439,10 +502,11 @@ static void qpnpint_irq_mask(struct irq_data *d) u8 data; raw_spin_lock_irqsave(&pa->lock, flags); - status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid)); + status = readl_relaxed(pa->intr + pa->ver_ops->acc_enable(apid)); if (status & SPMI_PIC_ACC_ENABLE_BIT) { status = status & ~SPMI_PIC_ACC_ENABLE_BIT; - writel_relaxed(status, pa->intr + SPMI_PIC_ACC_ENABLE(apid)); + writel_relaxed(status, pa->intr + + pa->ver_ops->acc_enable(apid)); } raw_spin_unlock_irqrestore(&pa->lock, flags); @@ -460,10 +524,10 @@ static void qpnpint_irq_unmask(struct irq_data *d) u8 data; raw_spin_lock_irqsave(&pa->lock, flags); - status = readl_relaxed(pa->intr + SPMI_PIC_ACC_ENABLE(apid)); + status = readl_relaxed(pa->intr + pa->ver_ops->acc_enable(apid)); if (!(status & SPMI_PIC_ACC_ENABLE_BIT)) { writel_relaxed(status | SPMI_PIC_ACC_ENABLE_BIT, - pa->intr + SPMI_PIC_ACC_ENABLE(apid)); + pa->intr + pa->ver_ops->acc_enable(apid)); } raw_spin_unlock_irqrestore(&pa->lock, flags); @@ -624,6 +688,91 @@ static int qpnpint_irq_domain_map(struct irq_domain *d, return 0; } +/* v1 offset per ee */ +static u32 pmic_arb_offset_v1(struct spmi_pmic_arb_dev *pa, u8 sid, u16 addr) +{ + return 0x800 + 0x80 * pa->channel; +} + +/* v2 offset per ppid (chan) and per ee */ +static u32 pmic_arb_offset_v2(struct spmi_pmic_arb_dev *pa, u8 sid, u16 addr) +{ + u16 ppid = (sid << 8) | (addr >> 8); + u8 chan = pa->ppid_to_chan[ppid]; + + return 0x1000 * pa->ee + 0x8000 * chan; +} + +static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u16 addr, u8 bc) +{ + return (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7); +} + +static u32 pmic_arb_fmt_cmd_v2(u8 opc, u8 sid, u16 addr, u8 bc) +{ + return (opc << 27) | ((addr & 0xff) << 4) | (bc & 0x7); +} + +static u32 pmic_arb_owner_acc_status_v1(u8 m, u8 n) +{ + return 0x20 * m + 0x4 * n; +} + +static u32 pmic_arb_owner_acc_status_v2(u8 m, u8 n) +{ + return 0x100000 + 0x1000 * m + 0x4 * n; +} + +static u32 pmic_arb_acc_enable_v1(u8 n) +{ + return 0x200 + 0x4 * n; +} + +static u32 pmic_arb_acc_enable_v2(u8 n) +{ + return 0x1000 * n; +} + +static u32 pmic_arb_irq_status_v1(u8 n) +{ + return 0x600 + 0x4 * n; +} + +static u32 pmic_arb_irq_status_v2(u8 n) +{ + return 0x4 + 0x1000 * n; +} + +static u32 pmic_arb_irq_clear_v1(u8 n) +{ + return 0xA00 + 0x4 * n; +} + +static u32 pmic_arb_irq_clear_v2(u8 n) +{ + return 0x8 + 0x1000 * n; +} + +static const struct pmic_arb_ver_ops pmic_arb_v1 = { + .non_data_cmd = pmic_arb_non_data_cmd_v1, + .offset = pmic_arb_offset_v1, + .fmt_cmd = pmic_arb_fmt_cmd_v1, + .owner_acc_status = pmic_arb_owner_acc_status_v1, + .acc_enable = pmic_arb_acc_enable_v1, + .irq_status = pmic_arb_irq_status_v1, + .irq_clear = pmic_arb_irq_clear_v1, +}; + +static const struct pmic_arb_ver_ops pmic_arb_v2 = { + .non_data_cmd = pmic_arb_non_data_cmd_v2, + .offset = pmic_arb_offset_v2, + .fmt_cmd = pmic_arb_fmt_cmd_v2, + .owner_acc_status = pmic_arb_owner_acc_status_v2, + .acc_enable = pmic_arb_acc_enable_v2, + .irq_status = pmic_arb_irq_status_v2, + .irq_clear = pmic_arb_irq_clear_v2, +}; + static const struct irq_domain_ops pmic_arb_irq_domain_ops = { .map = qpnpint_irq_domain_map, .xlate = qpnpint_irq_domain_dt_translate, @@ -634,8 +783,10 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) struct spmi_pmic_arb_dev *pa; struct spmi_controller *ctrl; struct resource *res; - u32 channel, ee; + void __iomem *core; + u32 channel, ee, hw_ver; int err, i; + bool is_v1; ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa)); if (!ctrl) @@ -645,12 +796,65 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) pa->spmic = ctrl; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core"); - pa->base = devm_ioremap_resource(&ctrl->dev, res); - if (IS_ERR(pa->base)) { - err = PTR_ERR(pa->base); + core = devm_ioremap_resource(&ctrl->dev, res); + if (IS_ERR(core)) { + err = PTR_ERR(core); goto err_put_ctrl; } + hw_ver = readl_relaxed(core + PMIC_ARB_VERSION); + is_v1 = (hw_ver < PMIC_ARB_VERSION_V2_MIN); + + dev_info(&ctrl->dev, "PMIC Arb Version-%d (0x%x)\n", (is_v1 ? 1 : 2), + hw_ver); + + if (is_v1) { + pa->ver_ops = &pmic_arb_v1; + pa->wr_base = core; + pa->rd_base = core; + } else { + u8 chan; + u16 ppid; + u32 regval; + + pa->ver_ops = &pmic_arb_v2; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "obsrvr"); + pa->rd_base = devm_ioremap_resource(&ctrl->dev, res); + if (IS_ERR(pa->rd_base)) { + err = PTR_ERR(pa->rd_base); + goto err_put_ctrl; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "chnls"); + pa->wr_base = devm_ioremap_resource(&ctrl->dev, res); + if (IS_ERR(pa->wr_base)) { + err = PTR_ERR(pa->wr_base); + goto err_put_ctrl; + } + + pa->ppid_to_chan = devm_kzalloc(&ctrl->dev, + PPID_TO_CHAN_TABLE_SZ, GFP_KERNEL); + if (!pa->ppid_to_chan) { + err = -ENOMEM; + goto err_put_ctrl; + } + /* + * PMIC_ARB_REG_CHNL is a table in HW mapping channel to ppid. + * ppid_to_chan is an in-memory invert of that table. + */ + for (chan = 0; chan < PMIC_ARB_MAX_CHNL; ++chan) { + regval = readl_relaxed(core + PMIC_ARB_REG_CHNL(chan)); + if (!regval) + continue; + + ppid = (regval >> 8) & 0xFFF; + pa->ppid_to_chan[ppid] = chan; + } + } + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr"); pa->intr = devm_ioremap_resource(&ctrl->dev, res); if (IS_ERR(pa->intr)) { @@ -731,9 +935,6 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev) if (err) goto err_domain_remove; - dev_dbg(&ctrl->dev, "PMIC Arb Version 0x%x\n", - pmic_arb_base_read(pa, PMIC_ARB_VERSION)); - return 0; err_domain_remove: diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index 1d92f5103ebf..94938436aef9 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -1,4 +1,5 @@ -/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -316,11 +317,6 @@ static int spmi_drv_probe(struct device *dev) struct spmi_device *sdev = to_spmi_device(dev); int err; - /* Ensure the slave is in ACTIVE state */ - err = spmi_command_wakeup(sdev); - if (err) - goto fail_wakeup; - pm_runtime_get_noresume(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); @@ -335,7 +331,6 @@ fail_probe: pm_runtime_disable(dev); pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); -fail_wakeup: return err; } diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index af40db0df58e..46b63ffd3681 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -299,4 +299,9 @@ depends on ARCH_STI && OF source "drivers/thermal/st/Kconfig" endmenu +menu "Qualcomm thermal drivers" +depends on ARCH_QCOM && OF +source "drivers/thermal/qcom/Kconfig" +endmenu + endif diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index fa0dc486790f..df83890a33df 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -38,4 +38,5 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_ST_THERMAL) += st/ +obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 000000000000..ade0a039bc82 --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,10 @@ +config QCOM_TSENS + tristate "Qualcomm Tsens Temperature Alarm" + depends on THERMAL + depends on QCOM_QFPROM + help + This enables the thermal sysfs driver for the Tsens device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 000000000000..f3cefd19e898 --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c new file mode 100644 index 000000000000..9cab709b4f1a --- /dev/null +++ b/drivers/thermal/qcom/tsens-8916.c @@ -0,0 +1,105 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8916 */ +#define BASE0_MASK 0x0000007f +#define BASE1_MASK 0xfe000000 +#define BASE0_SHIFT 0 +#define BASE1_SHIFT 25 + +#define S0_P1_MASK 0x00000f80 +#define S1_P1_MASK 0x003e0000 +#define S2_P1_MASK 0xf8000000 +#define S3_P1_MASK 0x000003e0 +#define S4_P1_MASK 0x000f8000 + +#define S0_P2_MASK 0x0001f000 +#define S1_P2_MASK 0x07c00000 +#define S2_P2_MASK 0x0000001f +#define S3_P2_MASK 0x00007c00 +#define S4_P2_MASK 0x01f00000 + +#define S0_P1_SHIFT 7 +#define S1_P1_SHIFT 17 +#define S2_P1_SHIFT 27 +#define S3_P1_SHIFT 5 +#define S4_P1_SHIFT 15 + +#define S0_P2_SHIFT 12 +#define S1_P2_SHIFT 22 +#define S2_P2_SHIFT 0 +#define S3_P2_SHIFT 10 +#define S4_P2_SHIFT 20 + +#define CAL_SEL_MASK 0xe0000000 +#define CAL_SEL_SHIFT 29 + +static int calibrate_8916(struct tsens_device *tmdev) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = qfprom_read(tmdev->dev, "calib_data"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = qfprom_read(tmdev->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) + return PTR_ERR(qfprom_csel); + + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & BASE0_MASK); + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = 500; + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000000..c0b2a4e7cc1b --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,283 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include "tsens.h" + +#define CAL_MDEGC 30000 + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define STATUS_CNTL_ADDR_8064 0x3660 +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) +#define SENSOR0_EN BIT(3) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define MEASURE_PERIOD 1 +#define SENSOR0_SHIFT 3 + +/* INT_STATUS_ADDR bitmasks */ +#define MIN_STATUS_MASK BIT(0) +#define LOWER_STATUS_CLR BIT(1) +#define UPPER_STATUS_CLR BIT(2) +#define MAX_STATUS_MASK BIT(3) + +#define THRESHOLD_ADDR 0x3624 +/* THRESHOLD_ADDR bitmasks */ +#define THRESHOLD_MAX_LIMIT_SHIFT 24 +#define THRESHOLD_MIN_LIMIT_SHIFT 16 +#define THRESHOLD_UPPER_LIMIT_SHIFT 8 +#define THRESHOLD_LOWER_LIMIT_SHIFT 0 + +/* Initial temperature threshold values */ +#define LOWER_LIMIT_TH 0x50 +#define UPPER_LIMIT_TH 0xdf +#define MIN_LIMIT_TH 0x0 +#define MAX_LIMIT_TH 0xff + +#define S0_STATUS_ADDR 0x3628 +#define INT_STATUS_ADDR 0x363c +#define TRDY_MASK BIT(7) + +static int suspend_8960(struct tsens_device *tmdev) +{ + unsigned int mask; + struct regmap *map = tmdev->map; + + regmap_read(map, THRESHOLD_ADDR, &tmdev->pm_tsens_thr_data); + regmap_read(map, CNTL_ADDR, &tmdev->pm_tsens_cntl); + + if (tmdev->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + regmap_update_bits(map, CNTL_ADDR, mask, 0); + tmdev->prev_reading_avail = 0; + + return 0; +} + +static int resume_8960(struct tsens_device *tmdev) +{ + unsigned long reg_cntl; + struct regmap *map = tmdev->map; + + regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + regmap_field_update_bits(tmdev->status_field, + MIN_STATUS_MASK | MAX_STATUS_MASK, + MIN_STATUS_MASK | MAX_STATUS_MASK); + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (tmdev->num_sensors > 1) + regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + + regmap_write(map, THRESHOLD_ADDR, tmdev->pm_tsens_thr_data); + regmap_write(map, CNTL_ADDR, tmdev->pm_tsens_cntl); + + reg_cntl = tmdev->pm_tsens_cntl; + reg_cntl >>= SENSOR0_SHIFT; + + return 0; +} + +static int enable_8960(struct tsens_device *tmdev, int id) +{ + u32 reg, mask; + + regmap_read(tmdev->map, CNTL_ADDR, ®); + mask = BIT(id + SENSOR0_SHIFT); + regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); + + if (tmdev->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + tmdev->prev_reading_avail = false; + regmap_write(tmdev->map, CNTL_ADDR, reg); + + return 0; +} + +static void disable_8960(struct tsens_device *tmdev) +{ + u32 reg_cntl; + u32 mask; + + mask = GENMASK(tmdev->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); + reg_cntl &= ~mask; + + if (tmdev->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); +} + +static int init_8960(struct tsens_device *tmdev) +{ + u32 reg_cntl, reg_thr; + struct reg_field *field; + static struct reg_field status_0 = { + .reg = STATUS_CNTL_ADDR_8064, + .lsb = 0, + .msb = 3, + }; + static struct reg_field status_8 = { + .reg = CNTL_ADDR, + .lsb = 8, + .msb = 11, + }; + int i; + + tmdev->map = dev_get_regmap(tmdev->dev->parent, NULL); + if (tmdev->map) + return -ENODEV; + + /* Status bits move when the sensor bits next to them overlap */ + if (tmdev->num_sensors > 5) + field = &status_0; + else + field = &status_8; + + tmdev->status_field = devm_regmap_field_alloc(tmdev->dev, tmdev->map, + *field); + if (IS_ERR(tmdev->status_field)) { + dev_err(tmdev->dev, "regmap alloc failed\n"); + return PTR_ERR(tmdev->status_field); + } + + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more + * but the control registers stay in the same place, i.e + * directly after the first 5 status registers. + */ + for (i = 0; i < tmdev->num_sensors; i++) { + if (i >= 5) + tmdev->sensor[i].status = S0_STATUS_ADDR + 40; + tmdev->sensor[i].status += i * 4; + } + + reg_cntl = SW_RST; + regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); + + if (tmdev->num_sensors > 1) { + reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); + reg_cntl &= ~SW_RST; + regmap_update_bits(tmdev->map, CONFIG_ADDR, + CONFIG_MASK, CONFIG); + } else { + reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); + reg_cntl &= ~CONFIG_MASK_8660; + reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; + } + + reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + + regmap_field_update_bits(tmdev->status_field, + LOWER_STATUS_CLR | UPPER_STATUS_CLR | + MIN_STATUS_MASK | MAX_STATUS_MASK, + LOWER_STATUS_CLR | UPPER_STATUS_CLR | + MIN_STATUS_MASK | MAX_STATUS_MASK); + + reg_cntl |= EN; + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + + reg_thr = (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) | + (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) | + (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) | + (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT); + regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr); + + return 0; +} + +static int calibrate_8960(struct tsens_device *tmdev) +{ + int i; + u32 *data; + + ssize_t num_read = tmdev->num_sensors; + struct tsens_sensor *s = tmdev->sensor; + + data = qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(tmdev->dev, "backup_calib"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < num_read; i++, s++) + s->offset = CAL_MDEGC - s->slope * data[i]; + + return 0; +} + +/* Temperature on y axis and ADC-code on x-axis */ +static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) +{ + return adc_code * s->slope + s->offset; +} + +static int get_temp_8960(struct tsens_device *tmdev, int id, long *temp) +{ + u32 code, trdy; + const struct tsens_sensor *s = &tmdev->sensor[id]; + + if (!tmdev->prev_reading_avail) { + while (!regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy) && + !(trdy & TRDY_MASK)) + usleep_range(1000, 1100); + tmdev->prev_reading_avail = true; + } + + regmap_read(tmdev->map, s->status, &code); + *temp = code_to_mdegC(code, s); + + dev_dbg(tmdev->dev, "Sensor%d temp is: %ld", id, *temp); + + return 0; +} + +const struct tsens_ops ops_8960 = { + .init = init_8960, + .calibrate = calibrate_8960, + .get_temp = get_temp_8960, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c new file mode 100644 index 000000000000..131ddee3b7df --- /dev/null +++ b/drivers/thermal/qcom/tsens-8974.c @@ -0,0 +1,239 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8974 */ +#define BASE1_MASK 0xff +#define S0_P1_MASK 0x3f00 +#define S1_P1_MASK 0xfc000 +#define S2_P1_MASK 0x3f00000 +#define S3_P1_MASK 0xfc000000 +#define S4_P1_MASK 0x3f +#define S5_P1_MASK 0xfc0 +#define S6_P1_MASK 0x3f000 +#define S7_P1_MASK 0xfc0000 +#define S8_P1_MASK 0x3f000000 +#define S8_P1_MASK_BKP 0x3f +#define S9_P1_MASK 0x3f +#define S9_P1_MASK_BKP 0xfc0 +#define S10_P1_MASK 0xfc0 +#define S10_P1_MASK_BKP 0x3f000 +#define CAL_SEL_0_1 0xc0000000 +#define CAL_SEL_2 0x40000000 +#define CAL_SEL_SHIFT 30 +#define CAL_SEL_SHIFT_2 28 + +#define S0_P1_SHIFT 8 +#define S1_P1_SHIFT 14 +#define S2_P1_SHIFT 20 +#define S3_P1_SHIFT 26 +#define S5_P1_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S7_P1_SHIFT 18 +#define S8_P1_SHIFT 24 +#define S9_P1_BKP_SHIFT 6 +#define S10_P1_SHIFT 6 +#define S10_P1_BKP_SHIFT 12 + +#define BASE2_SHIFT 12 +#define BASE2_BKP_SHIFT 18 +#define S0_P2_SHIFT 20 +#define S0_P2_BKP_SHIFT 26 +#define S1_P2_SHIFT 26 +#define S2_P2_BKP_SHIFT 6 +#define S3_P2_SHIFT 6 +#define S3_P2_BKP_SHIFT 12 +#define S4_P2_SHIFT 12 +#define S4_P2_BKP_SHIFT 18 +#define S5_P2_SHIFT 18 +#define S5_P2_BKP_SHIFT 24 +#define S6_P2_SHIFT 24 +#define S7_P2_BKP_SHIFT 6 +#define S8_P2_SHIFT 6 +#define S8_P2_BKP_SHIFT 12 +#define S9_P2_SHIFT 12 +#define S9_P2_BKP_SHIFT 18 +#define S10_P2_SHIFT 18 +#define S10_P2_BKP_SHIFT 24 + +#define BASE2_MASK 0xff000 +#define BASE2_BKP_MASK 0xfc0000 +#define S0_P2_MASK 0x3f00000 +#define S0_P2_BKP_MASK 0xfc000000 +#define S1_P2_MASK 0xfc000000 +#define S1_P2_BKP_MASK 0x3f +#define S2_P2_MASK 0x3f +#define S2_P2_BKP_MASK 0xfc0 +#define S3_P2_MASK 0xfc0 +#define S3_P2_BKP_MASK 0x3f000 +#define S4_P2_MASK 0x3f000 +#define S4_P2_BKP_MASK 0xfc0000 +#define S5_P2_MASK 0xfc0000 +#define S5_P2_BKP_MASK 0x3f000000 +#define S6_P2_MASK 0x3f000000 +#define S6_P2_BKP_MASK 0x3f +#define S7_P2_MASK 0x3f +#define S7_P2_BKP_MASK 0xfc0 +#define S8_P2_MASK 0xfc0 +#define S8_P2_BKP_MASK 0x3f000 +#define S9_P2_MASK 0x3f000 +#define S9_P2_BKP_MASK 0xfc0000 +#define S10_P2_MASK 0xfc0000 +#define S10_P2_BKP_MASK 0x3f000000 + +#define BKP_SEL 0x3 +#define BKP_REDUN_SEL 0xe0000000 +#define BKP_REDUN_SHIFT 29 + +#define BIT_APPEND 0x3 + +static int calibrate_8974(struct tsens_device *tmdev) +{ + int base1 = 0, base2 = 0, i; + u32 p1[11], p2[11]; + int mode = 0; + u32 *calib, *bkp; + u32 calib_redun_sel; + + calib = qfprom_read(tmdev->dev, "calib_data"); + if (IS_ERR(calib)) + return PTR_ERR(calib); + + bkp = qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(bkp)) + return PTR_ERR(bkp); + + calib_redun_sel = bkp[1] & BKP_REDUN_SEL; + calib_redun_sel >>= BKP_REDUN_SHIFT; + + if (calib_redun_sel == BKP_SEL) { + mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT; + p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT; + p2[1] = (bkp[3] & S1_P2_BKP_MASK); + p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT; + p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT; + p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT; + p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT; + p2[6] = (calib[5] & S6_P2_BKP_MASK); + p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT; + p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT; + p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT; + p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = bkp[0] & BASE1_MASK; + p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (bkp[1] & S4_P1_MASK); + p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT; + p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT; + p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT; + break; + } + } else { + mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT; + p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (calib[3] & S2_P2_MASK); + p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT; + p2[7] = (calib[4] & S7_P2_MASK); + p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT; + p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = calib[0] & BASE1_MASK; + p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (calib[1] & S4_P1_MASK); + p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (calib[2] & S9_P1_MASK); + p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT; + break; + } + } + + switch (mode) { + case ONE_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] += (base1 << 2) | BIT_APPEND; + break; + case TWO_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) { + p2[i] += base2; + p2[i] <<= 2; + p2[i] |= BIT_APPEND; + } + /* Fall through */ + case ONE_PT_CALIB2: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] += base1; + p1[i] <<= 2; + p1[i] |= BIT_APPEND; + } + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = 780; + p1[0] = 502; + p1[1] = 509; + p1[2] = 503; + p1[3] = 509; + p1[4] = 505; + p1[5] = 509; + p1[6] = 507; + p1[7] = 510; + p1[8] = 508; + p1[9] = 509; + p1[10] = 508; + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +const struct tsens_ops ops_8974 = { + .init = init_common, + .calibrate = calibrate_8974, + .get_temp = get_temp_common, +}; diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 000000000000..c93c8fc77cd0 --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,117 @@ + +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/eeprom-consumer.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include "tsens.h" + +#define S0_ST_ADDR(n) ((n) + 0x1030) +#define TRDY_ADDR(n) ((n) + 0x105c) +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 + +u32 *qfprom_read(struct device *dev, const char *cname) +{ + struct eeprom_cell *cell; + ssize_t data; + u32 *ret; + + cell = of_eeprom_cell_get_byname(dev, cname); + if (IS_ERR(cell)) + return (u32 *)cell; + + ret = (u32 *)eeprom_cell_read(cell, &data); + eeprom_cell_put(cell); + return ret; +} + +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + if (mode == TWO_PT_CALIB) { + /* slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + temp_120_degc - temp_30_degc (x2 - x1) */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, long *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + unsigned int code; + void __iomem *sensor_addr; + void __iomem *trdy_addr; + int last_temp = 0; + + trdy_addr = TRDY_ADDR(tmdev->base); + sensor_addr = S0_ST_ADDR(tmdev->base) + id * SN_ADDR_OFFSET; + + code = readl_relaxed(sensor_addr); + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s); + + return 0; +} + +int init_common(struct tsens_device *tmdev) +{ + tmdev->base = of_iomap(tmdev->dev->of_node, 0); + if (IS_ERR(tmdev->base)) + return -EINVAL; + return 0; +} diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 000000000000..b4e8fb8a76ed --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,195 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include "tsens.h" + +static int tsens_get_temp(void *data, long *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + return tmdev->ops->get_temp(tmdev, s->id, temp); +} + +static int tsens_get_trend(void *data, long *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) + return tmdev->ops->get_trend(tmdev, s->id, temp); + + return -ENOSYS; +} + +#ifdef CONFIG_PM +static int tsens_suspend(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); + + return 0; +} + +static int tsens_resume(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); +#define TSENS_PM_OPS (&tsens_pm_ops) + +#else /* CONFIG_PM_SLEEP */ +#define TSENS_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,msm8960-tsens", + .data = &ops_8960, + }, { + .compatible = "qcom,msm8916-tsens", + .data = &ops_8916, + }, { + .compatible = "qcom,msm8974-tsens", + .data = &ops_8974, + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, +}; + +static int tsens_register(struct tsens_device *tmdev) +{ + int i; + struct thermal_zone_device *tzd; + + for (i = 0; i < tmdev->num_sensors; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tzd = thermal_zone_of_sensor_register(tmdev->dev, i, + &tmdev->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + tmdev->sensor[i].tzd = tzd; + if (tmdev->ops->enable) + tmdev->ops->enable(tmdev, i); + } + return 0; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i, num; + struct device_node *np = pdev->dev.of_node; + struct tsens_sensor *s; + struct tsens_device *tmdev; + const struct of_device_id *id; + + num = of_property_count_u32_elems(np, "qcom,tsens-slopes"); + if (num <= 0) { + dev_err(&pdev->dev, "invalid tsens slopes\n"); + return -EINVAL; + } + + tmdev = devm_kzalloc(&pdev->dev, sizeof(*tmdev) + + num * sizeof(*s), GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = &pdev->dev; + tmdev->num_sensors = num; + + for (i = 0, s = tmdev->sensor; i < tmdev->num_sensors; i++, s++) + of_property_read_u32_index(np, "qcom,tsens-slopes", i, + &s->slope); + + id = of_match_node(tsens_table, np); + if (!id) + return -ENODEV; + + tmdev->ops = id->data; + if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->calibrate || + !tmdev->ops->get_temp) + return -EINVAL; + + ret = tmdev->ops->init(tmdev); + if (ret < 0) { + dev_err(&pdev->dev, "tsens init failed\n"); + return ret; + } + + ret = tmdev->ops->calibrate(tmdev); + if (ret < 0) { + dev_err(&pdev->dev, "tsens calibration failed\n"); + return ret; + } + + ret = tsens_register(tmdev); + + platform_set_drvdata(pdev, tmdev); + + return ret; +} + +static int tsens_remove(struct platform_device *pdev) +{ + int i; + struct tsens_device *tmdev = platform_get_drvdata(pdev); + struct thermal_zone_device *tzd; + + if (tmdev->ops->disable) + tmdev->ops->disable(tmdev); + + for (i = 0; i < tmdev->num_sensors; i++) { + tzd = tmdev->sensor[i].tzd; + thermal_zone_of_sensor_unregister(&pdev->dev, tzd); + } + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = TSENS_PM_OPS, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 000000000000..727d9a30338a --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + +struct tsens_device; + +struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; + int offset; + int id; + u32 slope; + u32 status; +}; + +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_device *); + int (*calibrate)(struct tsens_device *); + int (*get_temp)(struct tsens_device *, int, long *); + /* optional callbacks */ + int (*enable)(struct tsens_device *, int); + void (*disable)(struct tsens_device *); + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, long *); +}; + +struct tsens_device { + struct device *dev; + u32 num_sensors; + void __iomem *base; + struct regmap *map; + struct regmap_field *status_field; + int pm_tsens_thr_data; + int pm_tsens_cntl; + bool prev_reading_avail; + const struct tsens_ops *ops; + struct tsens_sensor sensor[0]; +}; + +u32 *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, long *); + +extern const struct tsens_ops ops_8960, ops_8916, ops_8974; + +#endif /* __QCOM_TSENS_H__ */ diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 65913d48f0c8..0cfb398052d2 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -13,6 +13,7 @@ #ifndef __DRIVERS_USB_CHIPIDEA_CI_H #define __DRIVERS_USB_CHIPIDEA_CI_H +#include <linux/extcon.h> #include <linux/list.h> #include <linux/irqreturn.h> #include <linux/usb.h> @@ -169,6 +170,8 @@ struct hw_bank { * @b_sess_valid_event: indicates there is a vbus event, and handled * at ci_otg_work * @imx28_write_fix: Freescale imx28 needs swp instruction for writing + * @edev_vbus: extcon device. Used to read VBUS signal state + * @edev_id: extcon device. Used to read ID signal state */ struct ci_hdrc { struct device *dev; @@ -211,6 +214,9 @@ struct ci_hdrc { bool id_event; bool b_sess_valid_event; bool imx28_write_fix; + + struct extcon_dev *edev_vbus; + struct extcon_dev *edev_id; }; static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index a57dc8866fc5..9aca7e66a5d1 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -47,6 +47,7 @@ #include <linux/delay.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/extcon.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/module.h> @@ -702,6 +703,18 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->usb_phy = NULL; } + if (of_property_read_bool(dev->parent->of_node, "extcon")) { + + /* Each one of them is not mandatory */ + ci->edev_vbus = extcon_get_edev_by_phandle(dev->parent, 0); + if (IS_ERR(ci->edev_vbus) && PTR_ERR(ci->edev_vbus) != -ENODEV) + return PTR_ERR(ci->edev_vbus); + + ci->edev_id = extcon_get_edev_by_phandle(dev->parent, 1); + if (IS_ERR(ci->edev_id) && PTR_ERR(ci->edev_id) != -ENODEV) + return PTR_ERR(ci->edev_id); + } + ret = ci_usb_phy_init(ci); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index a048b08b9d4d..495ca37fc60b 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -30,7 +30,24 @@ */ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) { - return hw_read(ci, OP_OTGSC, mask); + u32 val = hw_read(ci, OP_OTGSC, mask); + + if ((mask & OTGSC_BSV) && !IS_ERR(ci->edev_vbus)) { + if (extcon_get_cable_state(ci->edev_vbus, "USB")) + val |= OTGSC_BSV; + else + val &= ~OTGSC_BSV; + } + + if ((mask & OTGSC_ID) && !IS_ERR(ci->edev_id)) { + if (extcon_get_cable_state(ci->edev_id, "USB-HOST")) + val |= OTGSC_ID; + else + val &= ~OTGSC_ID; + } + + val &= mask; + return val; } /** diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9db74ca7e5b9..2af19aa27733 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -88,13 +88,17 @@ static int ehci_msm_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (!res) + return -ENODEV; + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + hcd->regs = devm_ioremap_nocache(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto put_hcd; } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); /* * OTG driver takes care of PHY initialization, clock management, diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 000fd892455f..43ffbbea32ac 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -431,6 +431,27 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + /* workaround for rx buffer collision issue */ + val = readl(USB_GENCONFIG); + val &= ~GENCONFIG_TXFIFO_IDLE_FORCE_DISABLE; + writel(val, USB_GENCONFIG); + + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GEN2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1445,6 +1466,40 @@ static const struct of_device_id msm_otg_dt_match[] = { }; MODULE_DEVICE_TABLE(of, msm_otg_dt_match); +static int msm_otg_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_otg *motg = container_of(nb, struct msm_otg, vbus_nb); + + dev_dbg(motg->phy.dev, "USB/VBUS is %d\n", (int)event); + + if (event) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + +static int msm_otg_id_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct msm_otg *motg = container_of(nb, struct msm_otg, id_nb); + + dev_dbg(motg->phy.dev, "USB-HOST/ID is %d\n", (int)event); + + if (event) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + + schedule_work(&motg->sm_work); + + return NOTIFY_DONE; +} + static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) { struct msm_otg_platform_data *pdata; @@ -1496,6 +1551,55 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + if (of_property_read_bool(node, "extcon")) { + struct extcon_dev *ext_id, *ext_vbus; + + /* Each one of them is not mandatory */ + ext_vbus = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) + return PTR_ERR(ext_vbus); + + ext_id = extcon_get_edev_by_phandle(&pdev->dev, 1); + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) + return PTR_ERR(ext_id); + + if (IS_ERR(ext_vbus)) { + dev_dbg(&pdev->dev, "no VBUS extcon\n"); + } else { + motg->vbus_nb.notifier_call = msm_otg_vbus_notifier; + ret = extcon_register_interest(&motg->vbus_cable, ext_vbus->name, + "USB", &motg->vbus_nb); + if (ret < 0) { + dev_err(&pdev->dev, "register VBUS notifier failed\n"); + return ret; + } else { + ret = extcon_get_cable_state(ext_vbus, "USB"); + if (ret) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } + } + + if (IS_ERR(ext_id)) { + dev_dbg(&pdev->dev, "no ID extcon\n"); + } else { + motg->id_nb.notifier_call = msm_otg_id_notifier; + ret = extcon_register_interest(&motg->id_cable, ext_id->name, + "USB", &motg->id_nb); + if (ret < 0) { + dev_err(&pdev->dev, "register ID notifier failed\n"); + return ret; + } else { + ret = extcon_get_cable_state(ext_id, "USB-HOST"); + if (ret) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + } + } + } + prop = of_find_property(node, "qcom,phy-init-sequence", &len); if (!prop || !len) return 0; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index ac78910d7416..91c09305106d 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -167,6 +167,7 @@ #define IOMMU_OF_TABLES() OF_TABLE(CONFIG_OF_IOMMU, iommu) #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem) #define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method) +#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method) #define EARLYCON_OF_TABLES() OF_TABLE(CONFIG_SERIAL_EARLYCON, earlycon) #define KERNEL_DTB() \ @@ -501,6 +502,7 @@ CLKSRC_OF_TABLES() \ IOMMU_OF_TABLES() \ CPU_METHOD_OF_TABLES() \ + CPUIDLE_METHOD_OF_TABLES() \ KERNEL_DTB() \ IRQCHIP_OF_MATCH_TABLE() \ EARLYCON_OF_TABLES() diff --git a/include/dt-bindings/arm/qcom-ids.h b/include/dt-bindings/arm/qcom-ids.h new file mode 100644 index 000000000000..a18f34e7d965 --- /dev/null +++ b/include/dt-bindings/arm/qcom-ids.h @@ -0,0 +1,33 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DT_BINDINGS_QCOM_IDS_H +#define __DT_BINDINGS_QCOM_IDS_H + +/* qcom,msm-id */ +#define QCOM_ID_MSM8916 206 +#define QCOM_ID_APQ8016 247 +#define QCOM_ID_MSM8216 248 +#define QCOM_ID_MSM8116 249 +#define QCOM_ID_MSM8616 250 + +/* qcom,board-id */ +#define QCOM_BRD_ID(a, major, minor) \ + (((major & 0xff) << 16) | ((minor & 0xff) << 8) | QCOM_BRD_ID_##a) + +#define QCOM_BRD_ID_MTP 8 +#define QCOM_BRD_ID_DRAGONBRD 10 +#define QCOM_BRD_ID_SBC 24 + +#define QCOM_BRD_SUBTYPE_DEFAULT 0 +#define QCOM_BRD_SUBTYPE_MTP8916_SMB1360 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,gcc-apq8084.h b/include/dt-bindings/clock/qcom,gcc-apq8084.h index 2c0da566c46a..5aa7ebeae411 100644 --- a/include/dt-bindings/clock/qcom,gcc-apq8084.h +++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h @@ -348,4 +348,10 @@ #define GCC_PCIE_1_PIPE_CLK 331 #define GCC_PCIE_1_SLV_AXI_CLK 332 +/* gdscs */ +#define USB_HS_HSIC_GDSC 0 +#define PCIE0_GDSC 1 +#define PCIE1_GDSC 2 +#define USB30_GDSC 3 + #endif diff --git a/include/dt-bindings/clock/qcom,gcc-msm8916.h b/include/dt-bindings/clock/qcom,gcc-msm8916.h new file mode 100644 index 000000000000..11566c567356 --- /dev/null +++ b/include/dt-bindings/clock/qcom,gcc-msm8916.h @@ -0,0 +1,164 @@ +/* + * Copyright 2015 Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MSM_GCC_8916_H +#define _DT_BINDINGS_CLK_MSM_GCC_8916_H + +#define GPLL0 0 +#define GPLL0_VOTE 1 +#define BIMC_PLL 2 +#define BIMC_PLL_VOTE 3 +#define GPLL1 4 +#define GPLL1_VOTE 5 +#define GPLL2 6 +#define GPLL2_VOTE 7 +#define PCNOC_BFDCD_CLK_SRC 8 +#define SYSTEM_NOC_BFDCD_CLK_SRC 9 +#define CAMSS_AHB_CLK_SRC 10 +#define APSS_AHB_CLK_SRC 11 +#define CSI0_CLK_SRC 12 +#define CSI1_CLK_SRC 13 +#define GFX3D_CLK_SRC 14 +#define VFE0_CLK_SRC 15 +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 16 +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 17 +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 18 +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 19 +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 20 +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 21 +#define BLSP1_QUP4_I2C_APPS_CLK_SRC 22 +#define BLSP1_QUP4_SPI_APPS_CLK_SRC 23 +#define BLSP1_QUP5_I2C_APPS_CLK_SRC 24 +#define BLSP1_QUP5_SPI_APPS_CLK_SRC 25 +#define BLSP1_QUP6_I2C_APPS_CLK_SRC 26 +#define BLSP1_QUP6_SPI_APPS_CLK_SRC 27 +#define BLSP1_UART1_APPS_CLK_SRC 28 +#define BLSP1_UART2_APPS_CLK_SRC 29 +#define CCI_CLK_SRC 30 +#define CAMSS_GP0_CLK_SRC 31 +#define CAMSS_GP1_CLK_SRC 32 +#define JPEG0_CLK_SRC 33 +#define MCLK0_CLK_SRC 34 +#define MCLK1_CLK_SRC 35 +#define CSI0PHYTIMER_CLK_SRC 36 +#define CSI1PHYTIMER_CLK_SRC 37 +#define CPP_CLK_SRC 38 +#define CRYPTO_CLK_SRC 39 +#define GP1_CLK_SRC 40 +#define GP2_CLK_SRC 41 +#define GP3_CLK_SRC 42 +#define BYTE0_CLK_SRC 43 +#define ESC0_CLK_SRC 44 +#define MDP_CLK_SRC 45 +#define PCLK0_CLK_SRC 46 +#define VSYNC_CLK_SRC 47 +#define PDM2_CLK_SRC 48 +#define SDCC1_APPS_CLK_SRC 49 +#define SDCC2_APPS_CLK_SRC 50 +#define APSS_TCU_CLK_SRC 51 +#define USB_HS_SYSTEM_CLK_SRC 52 +#define VCODEC0_CLK_SRC 53 +#define GCC_BLSP1_AHB_CLK 54 +#define GCC_BLSP1_SLEEP_CLK 55 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 56 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 57 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 58 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 59 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 60 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 61 +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 62 +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 63 +#define GCC_BLSP1_QUP5_I2C_APPS_CLK 64 +#define GCC_BLSP1_QUP5_SPI_APPS_CLK 65 +#define GCC_BLSP1_QUP6_I2C_APPS_CLK 66 +#define GCC_BLSP1_QUP6_SPI_APPS_CLK 67 +#define GCC_BLSP1_UART1_APPS_CLK 68 +#define GCC_BLSP1_UART2_APPS_CLK 69 +#define GCC_BOOT_ROM_AHB_CLK 70 +#define GCC_CAMSS_CCI_AHB_CLK 71 +#define GCC_CAMSS_CCI_CLK 72 +#define GCC_CAMSS_CSI0_AHB_CLK 73 +#define GCC_CAMSS_CSI0_CLK 74 +#define GCC_CAMSS_CSI0PHY_CLK 75 +#define GCC_CAMSS_CSI0PIX_CLK 76 +#define GCC_CAMSS_CSI0RDI_CLK 77 +#define GCC_CAMSS_CSI1_AHB_CLK 78 +#define GCC_CAMSS_CSI1_CLK 79 +#define GCC_CAMSS_CSI1PHY_CLK 80 +#define GCC_CAMSS_CSI1PIX_CLK 81 +#define GCC_CAMSS_CSI1RDI_CLK 82 +#define GCC_CAMSS_CSI_VFE0_CLK 83 +#define GCC_CAMSS_GP0_CLK 84 +#define GCC_CAMSS_GP1_CLK 85 +#define GCC_CAMSS_ISPIF_AHB_CLK 86 +#define GCC_CAMSS_JPEG0_CLK 87 +#define GCC_CAMSS_JPEG_AHB_CLK 88 +#define GCC_CAMSS_JPEG_AXI_CLK 89 +#define GCC_CAMSS_MCLK0_CLK 90 +#define GCC_CAMSS_MCLK1_CLK 91 +#define GCC_CAMSS_MICRO_AHB_CLK 92 +#define GCC_CAMSS_CSI0PHYTIMER_CLK 93 +#define GCC_CAMSS_CSI1PHYTIMER_CLK 94 +#define GCC_CAMSS_AHB_CLK 95 +#define GCC_CAMSS_TOP_AHB_CLK 96 +#define GCC_CAMSS_CPP_AHB_CLK 97 +#define GCC_CAMSS_CPP_CLK 98 +#define GCC_CAMSS_VFE0_CLK 99 +#define GCC_CAMSS_VFE_AHB_CLK 100 +#define GCC_CAMSS_VFE_AXI_CLK 101 +#define GCC_CRYPTO_AHB_CLK 102 +#define GCC_CRYPTO_AXI_CLK 103 +#define GCC_CRYPTO_CLK 104 +#define GCC_OXILI_GMEM_CLK 105 +#define GCC_GP1_CLK 106 +#define GCC_GP2_CLK 107 +#define GCC_GP3_CLK 108 +#define GCC_MDSS_AHB_CLK 109 +#define GCC_MDSS_AXI_CLK 110 +#define GCC_MDSS_BYTE0_CLK 111 +#define GCC_MDSS_ESC0_CLK 112 +#define GCC_MDSS_MDP_CLK 113 +#define GCC_MDSS_PCLK0_CLK 114 +#define GCC_MDSS_VSYNC_CLK 115 +#define GCC_MSS_CFG_AHB_CLK 116 +#define GCC_OXILI_AHB_CLK 117 +#define GCC_OXILI_GFX3D_CLK 118 +#define GCC_PDM2_CLK 119 +#define GCC_PDM_AHB_CLK 120 +#define GCC_PRNG_AHB_CLK 121 +#define GCC_SDCC1_AHB_CLK 122 +#define GCC_SDCC1_APPS_CLK 123 +#define GCC_SDCC2_AHB_CLK 124 +#define GCC_SDCC2_APPS_CLK 125 +#define GCC_GTCU_AHB_CLK 126 +#define GCC_JPEG_TBU_CLK 127 +#define GCC_MDP_TBU_CLK 128 +#define GCC_SMMU_CFG_CLK 129 +#define GCC_VENUS_TBU_CLK 130 +#define GCC_VFE_TBU_CLK 131 +#define GCC_USB2A_PHY_SLEEP_CLK 132 +#define GCC_USB_HS_AHB_CLK 133 +#define GCC_USB_HS_SYSTEM_CLK 134 +#define GCC_VENUS0_AHB_CLK 135 +#define GCC_VENUS0_AXI_CLK 136 +#define GCC_VENUS0_VCODEC0_CLK 137 + +/* Indexes for GDSCs */ +#define BIMC_GDSC 0 +#define VENUS_GDSC 1 +#define MDSS_GDSC 2 +#define JPEG_GDSC 3 +#define VFE_GDSC 4 +#define OXILI_GDSC 5 + +#endif diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h index 7d20eedfee98..e02742fc81cc 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8960.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h @@ -319,5 +319,7 @@ #define CE3_SRC 303 #define CE3_CORE_CLK 304 #define CE3_H_CLK 305 +#define PLL16 306 +#define PLL17 307 #endif diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h index 51e51c860fe6..81d32f639190 100644 --- a/include/dt-bindings/clock/qcom,gcc-msm8974.h +++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h @@ -321,4 +321,7 @@ #define GCC_SDCC1_CDCCAL_SLEEP_CLK 304 #define GCC_SDCC1_CDCCAL_FF_CLK 305 +/* gdscs */ +#define USB_HS_HSIC_GDSC 0 + #endif diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h index d72b5b35f15e..21fec5dbe616 100644 --- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h +++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h @@ -180,4 +180,12 @@ #define VPU_SLEEP_CLK 163 #define VPU_VDP_CLK 164 +/* GDSCs */ +#define VENUS0_GDSC 0 +#define MDSS_GDSC 1 +#define CAMSS_JPEG_GDSC 2 +#define CAMSS_VFE_GDSC 3 +#define OXILI_GDSC 4 +#define OXILICX_GDSC 5 + #endif diff --git a/include/dt-bindings/clock/qcom,mmcc-msm8974.h b/include/dt-bindings/clock/qcom,mmcc-msm8974.h index 032ed87ef0f3..28651e54c9ae 100644 --- a/include/dt-bindings/clock/qcom,mmcc-msm8974.h +++ b/include/dt-bindings/clock/qcom,mmcc-msm8974.h @@ -158,4 +158,12 @@ #define SPDM_RM_AXI 141 #define SPDM_RM_OCMEMNOC 142 +/* gdscs */ +#define VENUS0_GDSC 0 +#define MDSS_GDSC 1 +#define CAMSS_JPEG_GDSC 2 +#define CAMSS_VFE_GDSC 3 +#define OXILI_GDSC 4 +#define OXILICX_GDSC 5 + #endif diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index fa74d7cc960c..aafa76cb569d 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -48,6 +48,14 @@ #define PM8058_GPIO_L5 6 #define PM8058_GPIO_L2 7 +/* + * Note: PM8916 GPIO1 and GPIO2 are supporting + * only L2(1.15V) and L5(1.8V) options + */ +#define PM8916_GPIO_VPH 0 +#define PM8916_GPIO_L2 2 +#define PM8916_GPIO_L5 3 + #define PM8917_GPIO_VPH 0 #define PM8917_GPIO_S4 2 #define PM8917_GPIO_L15 3 @@ -115,6 +123,13 @@ #define PM8058_GPIO39_MP3_CLK PMIC_GPIO_FUNC_FUNC1 #define PM8058_GPIO40_EXT_BB_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO1_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO1_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PM8916_GPIO2_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO2_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PM8916_GPIO3_KEYP_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO4_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 + #define PM8917_GPIO9_18_KEYP_DRV PMIC_GPIO_FUNC_FUNC1 #define PM8917_GPIO20_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 #define PM8917_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2 diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index d2c7dabe3223..c10205491f8d 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -10,6 +10,10 @@ #define PM8841_MPP_VPH 0 #define PM8841_MPP_S3 2 +#define PM8916_MPP_VPH 0 +#define PM8916_MPP_L2 2 +#define PM8916_MPP_L5 3 + #define PM8941_MPP_VPH 0 #define PM8941_MPP_L1 1 #define PM8941_MPP_S3 2 diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h b/include/dt-bindings/reset/qcom,gcc-msm8916.h new file mode 100644 index 000000000000..3d90410f09c7 --- /dev/null +++ b/include/dt-bindings/reset/qcom,gcc-msm8916.h @@ -0,0 +1,108 @@ +/* + * Copyright 2015 Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H +#define _DT_BINDINGS_RESET_MSM_GCC_8916_H + +#define GCC_BLSP1_BCR 0 +#define GCC_BLSP1_QUP1_BCR 1 +#define GCC_BLSP1_UART1_BCR 2 +#define GCC_BLSP1_QUP2_BCR 3 +#define GCC_BLSP1_UART2_BCR 4 +#define GCC_BLSP1_QUP3_BCR 5 +#define GCC_BLSP1_QUP4_BCR 6 +#define GCC_BLSP1_QUP5_BCR 7 +#define GCC_BLSP1_QUP6_BCR 8 +#define GCC_IMEM_BCR 9 +#define GCC_SMMU_BCR 10 +#define GCC_APSS_TCU_BCR 11 +#define GCC_SMMU_XPU_BCR 12 +#define GCC_PCNOC_TBU_BCR 13 +#define GCC_PRNG_BCR 14 +#define GCC_BOOT_ROM_BCR 15 +#define GCC_CRYPTO_BCR 16 +#define GCC_SEC_CTRL_BCR 17 +#define GCC_AUDIO_CORE_BCR 18 +#define GCC_ULT_AUDIO_BCR 19 +#define GCC_DEHR_BCR 20 +#define GCC_SYSTEM_NOC_BCR 21 +#define GCC_PCNOC_BCR 22 +#define GCC_TCSR_BCR 23 +#define GCC_QDSS_BCR 24 +#define GCC_DCD_BCR 25 +#define GCC_MSG_RAM_BCR 26 +#define GCC_MPM_BCR 27 +#define GCC_SPMI_BCR 28 +#define GCC_SPDM_BCR 29 +#define GCC_MM_SPDM_BCR 30 +#define GCC_BIMC_BCR 31 +#define GCC_RBCPR_BCR 32 +#define GCC_TLMM_BCR 33 +#define GCC_USB_HS_BCR 34 +#define GCC_USB2A_PHY_BCR 35 +#define GCC_SDCC1_BCR 36 +#define GCC_SDCC2_BCR 37 +#define GCC_PDM_BCR 38 +#define GCC_SNOC_BUS_TIMEOUT0_BCR 39 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49 +#define GCC_MMSS_BCR 50 +#define GCC_VENUS0_BCR 51 +#define GCC_MDSS_BCR 52 +#define GCC_CAMSS_PHY0_BCR 53 +#define GCC_CAMSS_CSI0_BCR 54 +#define GCC_CAMSS_CSI0PHY_BCR 55 +#define GCC_CAMSS_CSI0RDI_BCR 56 +#define GCC_CAMSS_CSI0PIX_BCR 57 +#define GCC_CAMSS_PHY1_BCR 58 +#define GCC_CAMSS_CSI1_BCR 59 +#define GCC_CAMSS_CSI1PHY_BCR 60 +#define GCC_CAMSS_CSI1RDI_BCR 61 +#define GCC_CAMSS_CSI1PIX_BCR 62 +#define GCC_CAMSS_ISPIF_BCR 63 +#define GCC_CAMSS_CCI_BCR 64 +#define GCC_CAMSS_MCLK0_BCR 65 +#define GCC_CAMSS_MCLK1_BCR 66 +#define GCC_CAMSS_GP0_BCR 67 +#define GCC_CAMSS_GP1_BCR 68 +#define GCC_CAMSS_TOP_BCR 69 +#define GCC_CAMSS_MICRO_BCR 70 +#define GCC_CAMSS_JPEG_BCR 71 +#define GCC_CAMSS_VFE_BCR 72 +#define GCC_CAMSS_CSI_VFE0_BCR 73 +#define GCC_OXILI_BCR 74 +#define GCC_GMEM_BCR 75 +#define GCC_CAMSS_AHB_BCR 76 +#define GCC_MDP_TBU_BCR 77 +#define GCC_GFX_TBU_BCR 78 +#define GCC_GFX_TCU_BCR 79 +#define GCC_MSS_TBU_AXI_BCR 80 +#define GCC_MSS_TBU_GSS_AXI_BCR 81 +#define GCC_MSS_TBU_Q6_AXI_BCR 82 +#define GCC_GTCU_AHB_BCR 83 +#define GCC_SMMU_CFG_BCR 84 +#define GCC_VFE_TBU_BCR 85 +#define GCC_VENUS_TBU_BCR 86 +#define GCC_JPEG_TBU_BCR 87 +#define GCC_PRONTO_TBU_BCR 88 +#define GCC_SMMU_CATS_BCR 89 + +#endif diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 5591ea71a8d1..bc0f6faaeda4 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -183,6 +183,7 @@ struct clk_ops { struct clk_hw **best_parent_hw); int (*set_parent)(struct clk_hw *hw, u8 index); u8 (*get_parent)(struct clk_hw *hw); + struct clk_hw *(*get_safe_parent)(struct clk_hw *hw); int (*set_rate)(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate); int (*set_rate_and_parent)(struct clk_hw *hw, @@ -409,7 +410,7 @@ void clk_unregister_divider(struct clk *clk); struct clk_mux { struct clk_hw hw; void __iomem *reg; - u32 *table; + unsigned int *table; u32 mask; u8 shift; u8 flags; @@ -425,6 +426,11 @@ struct clk_mux { extern const struct clk_ops clk_mux_ops; extern const struct clk_ops clk_mux_ro_ops; +unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, + unsigned int *table, unsigned long flags); +unsigned int clk_mux_reindex(u8 index, unsigned int *table, + unsigned long flags); + struct clk *clk_register_mux(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u8 width, @@ -433,7 +439,7 @@ struct clk *clk_register_mux(struct device *dev, const char *name, struct clk *clk_register_mux_table(struct device *dev, const char *name, const char **parent_names, u8 num_parents, unsigned long flags, void __iomem *reg, u8 shift, u32 mask, - u8 clk_mux_flags, u32 *table, spinlock_t *lock); + u8 clk_mux_flags, unsigned int *table, spinlock_t *lock); void clk_unregister_mux(struct clk *clk); diff --git a/include/linux/eeprom-consumer.h b/include/linux/eeprom-consumer.h new file mode 100644 index 000000000000..6d9d075997ba --- /dev/null +++ b/include/linux/eeprom-consumer.h @@ -0,0 +1,67 @@ +/* + * EEPROM framework consumer. + * + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_EEPROM_CONSUMER_H +#define _LINUX_EEPROM_CONSUMER_H + +struct eeprom_cell; + +struct eeprom_block { + loff_t offset; + size_t count; +}; +#if IS_ENABLED(CONFIG_EEPROM) +struct eeprom_cell *eeprom_cell_get(const char *ename, + struct eeprom_block *blocks, int nblocks); +void eeprom_cell_put(struct eeprom_cell *cell); +char *eeprom_cell_read(struct eeprom_cell *cell, ssize_t *len); +int eeprom_cell_write(struct eeprom_cell *cell, const char *buf, ssize_t len); +#else + +static inline struct eeprom_cell *eeprom_cell_get(const char *ename, + struct eeprom_block *blocks, int nblocks) +{ + return NULL; +} + +static inline void eeprom_cell_put(struct eeprom_cell *cell) +{ +} + +static inline char *eeprom_cell_read(struct eeprom_cell *cell, ssize_t *len) +{ + return NULL; +} + +static inline int eeprom_cell_write(struct eeprom_cell *cell, + const char *buf, ssize_t len) +{ + return -ENOSYS; +} +#endif /* CONFIG_EEPROM */ + +#if IS_ENABLED(CONFIG_EEPROM) && IS_ENABLED(CONFIG_OF) +struct eeprom_cell *of_eeprom_cell_get(struct device *dev, int index); +struct eeprom_cell *of_eeprom_cell_get_byname(struct device *dev, + const char *name); +#else +static inline struct eeprom_cell *of_eeprom_cell_get( + struct device *dev, int index) +{ + return NULL; +} +static inline struct eeprom_cell *of_eeprom_cell_get_byname(struct device *dev, + const char *name) +{ + return NULL; +} +#endif +#endif /* ifndef _LINUX_EEPROM_CONSUMER_H */ diff --git a/include/linux/eeprom-provider.h b/include/linux/eeprom-provider.h new file mode 100644 index 000000000000..f2efa07d6f00 --- /dev/null +++ b/include/linux/eeprom-provider.h @@ -0,0 +1,42 @@ +/* + * EEPROM framework provider. + * + * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _LINUX_EEPROM_PROVIDER_H +#define _LINUX_EEPROM_PROVIDER_H + +struct eeprom_device; + +struct eeprom_config { + struct device *dev; + const char *name; + int id; + struct module *owner; +}; + +#if IS_ENABLED(CONFIG_EEPROM) + +struct eeprom_device *eeprom_register(struct eeprom_config *cfg); +int eeprom_unregister(struct eeprom_device *eeprom); + +#else + +static inline struct eeprom_device *eeprom_register(struct eeprom_config *cfg) +{ + return NULL; +} +static inline int eeprom_unregister(struct eeprom_device *eeprom) +{ + return -ENOSYS; +} + +#endif /* CONFIG_EEPROM */ + +#endif /* ifndef _LINUX_EEPROM_PROVIDER_H */ diff --git a/include/linux/memblock.h b/include/linux/memblock.h index e8cc45307f8f..96b7073ad452 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -285,6 +285,7 @@ phys_addr_t memblock_end_of_DRAM(void); void memblock_enforce_memory_limit(phys_addr_t memory_limit); int memblock_is_memory(phys_addr_t addr); int memblock_is_region_memory(phys_addr_t base, phys_addr_t size); +int memblock_overlaps_memory(phys_addr_t base, phys_addr_t size); int memblock_is_reserved(phys_addr_t addr); int memblock_is_region_reserved(phys_addr_t base, phys_addr_t size); diff --git a/arch/arm/mach-qcom/scm.h b/include/linux/mfd/pm8921-core.h index 00b31ea58f29..b31d785761f4 100644 --- a/arch/arm/mach-qcom/scm.h +++ b/include/linux/mfd/pm8921-core.h @@ -1,4 +1,5 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. +/* + * Copyright (c) 2014, Sony Mobile Communications AB * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -9,17 +10,22 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#ifndef __MACH_SCM_H -#define __MACH_SCM_H -#define SCM_SVC_BOOT 0x1 -#define SCM_SVC_PIL 0x2 +#ifndef __MFD_PM8921_CORE_H +#define __MFD_PM8921_CORE_H -extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len, - void *resp_buf, size_t resp_len); +#include <linux/err.h> -#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) +#if IS_ENABLED(CONFIG_MFD_PM8921_CORE) -extern u32 scm_get_version(void); +int pm8xxx_read_irq_status(int irq); + +#else +static inline int pm8xxx_read_irq_status(int irq) +{ + return -ENOSYS; +} + +#endif #endif diff --git a/include/linux/mfd/qcom_rpm.h b/include/linux/mfd/qcom_rpm.h index 742ebf1b76ca..a7af2edf0f64 100644 --- a/include/linux/mfd/qcom_rpm.h +++ b/include/linux/mfd/qcom_rpm.h @@ -9,5 +9,6 @@ struct qcom_rpm; #define QCOM_RPM_SLEEP_STATE 1 int qcom_rpm_write(struct qcom_rpm *rpm, int state, int resource, u32 *buf, size_t count); +int qcom_rpm_read(struct qcom_rpm *rpm, int resource, u32 *buf, size_t count); #endif diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h new file mode 100644 index 000000000000..d7a974d5f57c --- /dev/null +++ b/include/linux/qcom_scm.h @@ -0,0 +1,28 @@ +/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. + * Copyright (C) 2015 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_SCM_H +#define __QCOM_SCM_H + +extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus); +extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus); + +#define QCOM_SCM_CPU_PWR_DOWN_L2_ON 0x0 +#define QCOM_SCM_CPU_PWR_DOWN_L2_OFF 0x1 + +extern void qcom_scm_cpu_power_down(u32 flags); + +#define QCOM_SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF)) + +extern u32 qcom_scm_get_version(void); + +#endif diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 116655d92269..59c55ea0f0b5 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -433,6 +433,8 @@ int regmap_update_bits_check_async(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val, bool *change); int regmap_get_val_bytes(struct regmap *map); +int regmap_get_max_register(struct regmap *map); +int regmap_get_reg_stride(struct regmap *map); int regmap_async_complete(struct regmap *map); bool regmap_can_raw_write(struct regmap *map); @@ -676,6 +678,18 @@ static inline int regmap_get_val_bytes(struct regmap *map) return -EINVAL; } +static inline int regmap_get_max_register(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + +static inline int regmap_get_reg_stride(struct regmap *map) +{ + WARN_ONCE(1, "regmap API is disabled"); + return -EINVAL; +} + static inline int regcache_sync(struct regmap *map) { WARN_ONCE(1, "regmap API is disabled"); diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index b0a39243295a..68fa1cda9d49 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -18,6 +18,7 @@ #ifndef __ASM_ARCH_MSM_HSUSB_H #define __ASM_ARCH_MSM_HSUSB_H +#include <linux/extcon.h> #include <linux/types.h> #include <linux/usb/otg.h> #include <linux/clk.h> @@ -170,6 +171,10 @@ struct msm_otg { struct reset_control *phy_rst; struct reset_control *link_rst; int vdd_levels[3]; + struct extcon_specific_cable_nb vbus_cable; + struct notifier_block vbus_nb; + struct extcon_specific_cable_nb id_cable; + struct notifier_block id_nb; }; #endif diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index a29f6030afb1..6d4625ec7d54 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -21,6 +21,9 @@ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#define USB_GENCONFIG (MSM_USB_BASE + 0x009c) +#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) + #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) @@ -30,6 +33,11 @@ #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) +#define GEN2_SESS_VLD_CTRL_EN BIT(7) +#define USBCMD_SESS_VLD_CTRL BIT(25) + +#define GENCONFIG_TXFIFO_IDLE_FORCE_DISABLE BIT(4) + #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -47,8 +55,12 @@ #define ULPI_DATA_READ(n) (((n) >> 8) & 255) /* synopsys 28nm phy registers */ -#define ULPI_PWR_CLK_MNG_REG 0x88 -#define OTG_COMP_DISABLE BIT(0) +#define ULPI_PWR_CLK_MNG 0x88 +#define ULPI_PWR_CLK_MNG_OTG_COMP_DISABLE BIT(0) + +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ diff --git a/mm/memblock.c b/mm/memblock.c index 252b77bdf65e..d02ae8f9599b 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -1437,6 +1437,12 @@ int __init_memblock memblock_is_region_memory(phys_addr_t base, phys_addr_t size memblock.memory.regions[idx].size) >= end; } +int __init_memblock memblock_overlaps_memory(phys_addr_t base, phys_addr_t size) +{ + memblock_cap_size(base, &size); + return memblock_overlaps_region(&memblock.memory, base, size) >= 0; +} + /** * memblock_is_region_reserved - check if a region intersects reserved memory * @base: base of region to check diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 40e29429e7b0..4e7e4b949b0a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4953,6 +4953,8 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat, static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat) { + unsigned long __maybe_unused offset = 0; + /* Skip empty nodes */ if (!pgdat->node_spanned_pages) return; @@ -4969,6 +4971,7 @@ static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat) * for the buddy allocator to function correctly. */ start = pgdat->node_start_pfn & ~(MAX_ORDER_NR_PAGES - 1); + offset = pgdat->node_start_pfn - start; end = pgdat_end_pfn(pgdat); end = ALIGN(end, MAX_ORDER_NR_PAGES); size = (end - start) * sizeof(struct page); @@ -4976,7 +4979,7 @@ static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat) if (!map) map = memblock_virt_alloc_node_nopanic(size, pgdat->node_id); - pgdat->node_mem_map = map + (pgdat->node_start_pfn - start); + pgdat->node_mem_map = map + offset; } #ifndef CONFIG_NEED_MULTIPLE_NODES /* @@ -4984,10 +4987,12 @@ static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat) */ if (pgdat == NODE_DATA(0)) { mem_map = NODE_DATA(0)->node_mem_map; -#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP - if (page_to_pfn(mem_map) != pgdat->node_start_pfn) - mem_map -= (pgdat->node_start_pfn - ARCH_PFN_OFFSET); -#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */ +#if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM) + if (page_to_pfn(mem_map) != pgdat->node_start_pfn) { + mem_map -= offset; + VM_BUG_ON(page_to_pfn(mem_map) != pgdat->node_start_pfn); + } +#endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP || CONFIG_FLATMEM */ } #endif #endif /* CONFIG_FLAT_NODE_MEM_MAP */ |