# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # various tests to make sure we dist the win32 stuff (for MSVC builds) right # include this snippet to add a common release: target by using # include $(top_srcdir)/common/release.mak # checks for left-over files in the (usually uninstalled) tree, ie. for # stuff that best be deleted to avoid problems like having old plugin binaries # lying around. # # set CRUFT_FILES and/or CRUFT_DIRS in your Makefile.am when you include this VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ DIST_COMMON = $(top_srcdir)/common/win32.mak \ $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak \ $(top_srcdir)/common/coverage/lcov.mak \ $(top_srcdir)/common/cruft.mak INSTALL NEWS README AUTHORS \ ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) \ $(srcdir)/config.h.in $(srcdir)/gst-plugins-good.spec.in \ ABOUT-NLS $(noinst_HEADERS) COPYING compile config.guess \ config.rpath config.sub depcomp install-sh missing ltmain.sh subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/common/m4/as-ac-expand.m4 \ $(top_srcdir)/common/m4/as-auto-alt.m4 \ $(top_srcdir)/common/m4/as-compiler-flag.m4 \ $(top_srcdir)/common/m4/as-gcc-inline-assembly.m4 \ $(top_srcdir)/common/m4/as-libtool.m4 \ $(top_srcdir)/common/m4/as-version.m4 \ $(top_srcdir)/common/m4/ax_create_stdint_h.m4 \ $(top_srcdir)/common/m4/gst-arch.m4 \ $(top_srcdir)/common/m4/gst-args.m4 \ $(top_srcdir)/common/m4/gst-check.m4 \ $(top_srcdir)/common/m4/gst-default.m4 \ $(top_srcdir)/common/m4/gst-dowhile.m4 \ $(top_srcdir)/common/m4/gst-error.m4 \ $(top_srcdir)/common/m4/gst-feature.m4 \ $(top_srcdir)/common/m4/gst-gettext.m4 \ $(top_srcdir)/common/m4/gst-glib2.m4 \ $(top_srcdir)/common/m4/gst-package-release-datetime.m4 \ $(top_srcdir)/common/m4/gst-platform.m4 \ $(top_srcdir)/common/m4/gst-plugin-docs.m4 \ $(top_srcdir)/common/m4/gst-plugindir.m4 \ $(top_srcdir)/common/m4/gst-x11.m4 \ $(top_srcdir)/common/m4/gst.m4 \ $(top_srcdir)/common/m4/gtk-doc.m4 \ $(top_srcdir)/common/m4/orc.m4 $(top_srcdir)/common/m4/pkg.m4 \ $(top_srcdir)/m4/aalib.m4 $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/gst-fionread.m4 $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = gst-plugins-good.spec CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac HEADERS = $(noinst_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" GZIP_ENV = --best DIST_ARCHIVES = $(distdir).tar.xz DIST_TARGETS = dist-xz distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print AALIB_CFLAGS = @AALIB_CFLAGS@ AALIB_CONFIG = @AALIB_CONFIG@ AALIB_LIBS = @AALIB_LIBS@ ACLOCAL = @ACLOCAL@ ACLOCAL_AMFLAGS = -I m4 -I common/m4 AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BZ2_LIBS = @BZ2_LIBS@ CAIRO_CFLAGS = @CAIRO_CFLAGS@ CAIRO_LIBS = @CAIRO_LIBS@ CC = @CC@ CCAS = @CCAS@ CCASDEPMODE = @CCASDEPMODE@ CCASFLAGS = @CCASFLAGS@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFAULT_AUDIOSINK = @DEFAULT_AUDIOSINK@ DEFAULT_AUDIOSRC = @DEFAULT_AUDIOSRC@ DEFAULT_VIDEOSINK = @DEFAULT_VIDEOSINK@ DEFAULT_VIDEOSRC = @DEFAULT_VIDEOSRC@ DEFAULT_VISUALIZER = @DEFAULT_VISUALIZER@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DEPRECATED_CFLAGS = @DEPRECATED_CFLAGS@ DIRECTSOUND_CFLAGS = @DIRECTSOUND_CFLAGS@ DIRECTSOUND_LDFLAGS = @DIRECTSOUND_LDFLAGS@ DIRECTSOUND_LIBS = @DIRECTSOUND_LIBS@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ DV1394_CFLAGS = @DV1394_CFLAGS@ DV1394_LIBS = @DV1394_LIBS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ERROR_CFLAGS = @ERROR_CFLAGS@ ERROR_CXXFLAGS = @ERROR_CXXFLAGS@ ERROR_OBJCFLAGS = @ERROR_OBJCFLAGS@ EXEEXT = @EXEEXT@ FFLAGS = @FFLAGS@ FGREP = @FGREP@ FLAC_CFLAGS = @FLAC_CFLAGS@ FLAC_LIBS = @FLAC_LIBS@ GCOV = @GCOV@ GCOV_CFLAGS = @GCOV_CFLAGS@ GCOV_LIBS = @GCOV_LIBS@ GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@ GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@ GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GIO_CFLAGS = @GIO_CFLAGS@ GIO_LDFLAGS = @GIO_LDFLAGS@ GIO_LIBS = @GIO_LIBS@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_EXTRA_CFLAGS = @GLIB_EXTRA_CFLAGS@ GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ GLIB_LIBS = @GLIB_LIBS@ GLIB_MKENUMS = @GLIB_MKENUMS@ GLIB_PREFIX = @GLIB_PREFIX@ GLIB_REQ = @GLIB_REQ@ GMSGFMT = @GMSGFMT@ GMSGFMT_015 = @GMSGFMT_015@ GREP = @GREP@ GSTPB_PLUGINS_DIR = @GSTPB_PLUGINS_DIR@ GSTPB_PREFIX = @GSTPB_PREFIX@ GST_AGE = @GST_AGE@ GST_ALL_LDFLAGS = @GST_ALL_LDFLAGS@ GST_API_VERSION = @GST_API_VERSION@ GST_BASE_CFLAGS = @GST_BASE_CFLAGS@ GST_BASE_LIBS = @GST_BASE_LIBS@ GST_CFLAGS = @GST_CFLAGS@ GST_CHECK_CFLAGS = @GST_CHECK_CFLAGS@ GST_CHECK_LIBS = @GST_CHECK_LIBS@ GST_CONTROLLER_CFLAGS = @GST_CONTROLLER_CFLAGS@ GST_CONTROLLER_LIBS = @GST_CONTROLLER_LIBS@ GST_CURRENT = @GST_CURRENT@ GST_CXXFLAGS = @GST_CXXFLAGS@ GST_LEVEL_DEFAULT = @GST_LEVEL_DEFAULT@ GST_LIBS = @GST_LIBS@ GST_LIBVERSION = @GST_LIBVERSION@ GST_LICENSE = @GST_LICENSE@ GST_LT_LDFLAGS = @GST_LT_LDFLAGS@ GST_NET_CFLAGS = @GST_NET_CFLAGS@ GST_NET_LIBS = @GST_NET_LIBS@ GST_OBJCFLAGS = @GST_OBJCFLAGS@ GST_OPTION_CFLAGS = @GST_OPTION_CFLAGS@ GST_OPTION_CXXFLAGS = @GST_OPTION_CXXFLAGS@ GST_OPTION_OBJCFLAGS = @GST_OPTION_OBJCFLAGS@ GST_PACKAGE_NAME = @GST_PACKAGE_NAME@ GST_PACKAGE_ORIGIN = @GST_PACKAGE_ORIGIN@ GST_PLUGINS_ALL = @GST_PLUGINS_ALL@ GST_PLUGINS_BASE_CFLAGS = @GST_PLUGINS_BASE_CFLAGS@ GST_PLUGINS_BASE_DIR = @GST_PLUGINS_BASE_DIR@ GST_PLUGINS_BASE_LIBS = @GST_PLUGINS_BASE_LIBS@ GST_PLUGINS_DIR = @GST_PLUGINS_DIR@ GST_PLUGINS_NONPORTED = @GST_PLUGINS_NONPORTED@ GST_PLUGINS_SELECTED = @GST_PLUGINS_SELECTED@ GST_PLUGIN_LDFLAGS = @GST_PLUGIN_LDFLAGS@ GST_PLUGIN_LIBTOOLFLAGS = @GST_PLUGIN_LIBTOOLFLAGS@ GST_PREFIX = @GST_PREFIX@ GST_REVISION = @GST_REVISION@ GST_TOOLS_DIR = @GST_TOOLS_DIR@ GTKDOC_CHECK = @GTKDOC_CHECK@ GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@ GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@ GTKDOC_MKPDF = @GTKDOC_MKPDF@ GTKDOC_REBASE = @GTKDOC_REBASE@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_LIBS = @GTK_LIBS@ GTK_X11_CFLAGS = @GTK_X11_CFLAGS@ GTK_X11_LIBS = @GTK_X11_LIBS@ GUDEV_CFLAGS = @GUDEV_CFLAGS@ GUDEV_LIBS = @GUDEV_LIBS@ HAVE_AVC1394 = @HAVE_AVC1394@ HAVE_CXX = @HAVE_CXX@ HAVE_DIRECTSOUND = @HAVE_DIRECTSOUND@ HAVE_ROM1394 = @HAVE_ROM1394@ HAVE_SPEEX = @HAVE_SPEEX@ HAVE_X = @HAVE_X@ HAVE_XSHM = @HAVE_XSHM@ HAVE_ZLIB = @HAVE_ZLIB@ HTML_DIR = @HTML_DIR@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INTLLIBS = @INTLLIBS@ INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ JACK_0_120_1_CFLAGS = @JACK_0_120_1_CFLAGS@ JACK_0_120_1_LIBS = @JACK_0_120_1_LIBS@ JACK_1_9_7_CFLAGS = @JACK_1_9_7_CFLAGS@ JACK_1_9_7_LIBS = @JACK_1_9_7_LIBS@ JACK_CFLAGS = @JACK_CFLAGS@ JACK_LIBS = @JACK_LIBS@ JPEG_LIBS = @JPEG_LIBS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBCACA_CFLAGS = @LIBCACA_CFLAGS@ LIBCACA_LIBS = @LIBCACA_LIBS@ LIBDV_CFLAGS = @LIBDV_CFLAGS@ LIBDV_LIBS = @LIBDV_LIBS@ LIBICONV = @LIBICONV@ LIBIEC61883_CFLAGS = @LIBIEC61883_CFLAGS@ LIBIEC61883_LIBS = @LIBIEC61883_LIBS@ LIBINTL = @LIBINTL@ LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBPNG_CFLAGS = @LIBPNG_CFLAGS@ LIBPNG_LIBS = @LIBPNG_LIBS@ LIBRT = @LIBRT@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LIBV4L2_CFLAGS = @LIBV4L2_CFLAGS@ LIBV4L2_LIBS = @LIBV4L2_LIBS@ LIPO = @LIPO@ LN_S = @LN_S@ LOCALEDIR = @LOCALEDIR@ LTLIBICONV = @LTLIBICONV@ LTLIBINTL = @LTLIBINTL@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ MSGFMT = @MSGFMT@ MSGFMT_015 = @MSGFMT_015@ MSGMERGE = @MSGMERGE@ NM = @NM@ NMEDIT = @NMEDIT@ OBJC = @OBJC@ OBJCDEPMODE = @OBJCDEPMODE@ OBJCFLAGS = @OBJCFLAGS@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ ORCC = @ORCC@ ORCC_FLAGS = @ORCC_FLAGS@ ORC_CFLAGS = @ORC_CFLAGS@ ORC_LIBS = @ORC_LIBS@ OTOOL = @OTOOL@ OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PACKAGE_VERSION_MAJOR = @PACKAGE_VERSION_MAJOR@ PACKAGE_VERSION_MICRO = @PACKAGE_VERSION_MICRO@ PACKAGE_VERSION_MINOR = @PACKAGE_VERSION_MINOR@ PACKAGE_VERSION_NANO = @PACKAGE_VERSION_NANO@ PACKAGE_VERSION_RELEASE = @PACKAGE_VERSION_RELEASE@ PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ PLUGINDIR = @PLUGINDIR@ POSUB = @POSUB@ PROFILE_CFLAGS = @PROFILE_CFLAGS@ PULSE_CFLAGS = @PULSE_CFLAGS@ PULSE_LIBS = @PULSE_LIBS@ PYTHON = @PYTHON@ PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ PYTHON_PLATFORM = @PYTHON_PLATFORM@ PYTHON_PREFIX = @PYTHON_PREFIX@ PYTHON_VERSION = @PYTHON_VERSION@ RANLIB = @RANLIB@ RAW1394_CFLAGS = @RAW1394_CFLAGS@ RAW1394_LIBS = @RAW1394_LIBS@ SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SHOUT2_CFLAGS = @SHOUT2_CFLAGS@ SHOUT2_LIBS = @SHOUT2_LIBS@ SOUP_CFLAGS = @SOUP_CFLAGS@ SOUP_LIBS = @SOUP_LIBS@ SPEEX_CFLAGS = @SPEEX_CFLAGS@ SPEEX_LIBS = @SPEEX_LIBS@ STRIP = @STRIP@ TAGLIB_CFLAGS = @TAGLIB_CFLAGS@ TAGLIB_CXXFLAGS = @TAGLIB_CXXFLAGS@ TAGLIB_LIBS = @TAGLIB_LIBS@ USE_NLS = @USE_NLS@ VALGRIND_CFLAGS = @VALGRIND_CFLAGS@ VALGRIND_LIBS = @VALGRIND_LIBS@ VALGRIND_PATH = @VALGRIND_PATH@ VERSION = @VERSION@ VPX_130_CFLAGS = @VPX_130_CFLAGS@ VPX_130_LIBS = @VPX_130_LIBS@ VPX_CFLAGS = @VPX_CFLAGS@ VPX_LIBS = @VPX_LIBS@ WARNING_CFLAGS = @WARNING_CFLAGS@ WARNING_CXXFLAGS = @WARNING_CXXFLAGS@ WARNING_OBJCFLAGS = @WARNING_OBJCFLAGS@ WAVPACK_CFLAGS = @WAVPACK_CFLAGS@ WAVPACK_LIBS = @WAVPACK_LIBS@ XDAMAGE_CFLAGS = @XDAMAGE_CFLAGS@ XDAMAGE_LIBS = @XDAMAGE_LIBS@ XFIXES_CFLAGS = @XFIXES_CFLAGS@ XFIXES_LIBS = @XFIXES_LIBS@ XGETTEXT = @XGETTEXT@ XGETTEXT_015 = @XGETTEXT_015@ XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ XMKMF = @XMKMF@ XSHM_LIBS = @XSHM_LIBS@ X_CFLAGS = @X_CFLAGS@ X_EXTRA_LIBS = @X_EXTRA_LIBS@ X_LIBS = @X_LIBS@ X_PRE_LIBS = @X_PRE_LIBS@ ZLIB_LIBS = @ZLIB_LIBS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ ac_ct_OBJC = @ac_ct_OBJC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ pkgpyexecdir = @pkgpyexecdir@ pkgpythondir = @pkgpythondir@ plugindir = @plugindir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ pyexecdir = @pyexecdir@ pythondir = @pythondir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ DISTCHECK_CONFIGURE_FLAGS = --enable-gtk-doc ALWAYS_SUBDIRS = \ gst sys ext \ tests \ docs \ po \ common \ m4 \ pkgconfig SUBDIRS = $(ALWAYS_SUBDIRS) DIST_SUBDIRS = $(ALWAYS_SUBDIRS) # the MANIFEST contains all win32 related files that should be disted win32 = $(shell cat $(top_srcdir)/win32/MANIFEST) # wildcard is apparently not portable to other makes, hence the use of find # these are library .def files with the symbols to export win32defs = $(shell find $(top_srcdir)/win32/common -name '*.def') # wildcard is apparently not portable to other makes, hence the use of find # these are files that need to be disted with CRLF line endings: win32crlf = $(shell find $(top_srcdir)/win32 -name '*.dsw' -o -name '*.dsp') # include before EXTRA_DIST for win32 assignment EXTRA_DIST = \ gst-plugins-good.spec depcomp \ AUTHORS COPYING NEWS README RELEASE REQUIREMENTS \ ChangeLog gst-plugins-good.doap autogen.sh \ $(win32) DISTCLEANFILES = _stdint.h noinst_HEADERS = \ gst-libs/gst/gettext.h \ gst-libs/gst/gst-i18n-plugin.h \ gst-libs/gst/glib-compat-private.h # cruft: plugins that have been merged or moved or renamed CRUFT_FILES = \ $(top_builddir)/common/shave \ $(top_builddir)/common/shave-libtool \ $(top_builddir)/gst/median/.libs/*.{so,dll,DLL,dylib} \ $(top_builddir)/gst/qtdemux/.libs/*.{so,dll,DLL,dylib} \ $(top_builddir)/gst/quicktime/.libs/*.{so,dll,DLL,dylib} \ $(top_builddir)/gst/videofilter/.libs/*videoflip.{so,dll,DLL,dylib} \ $(top_builddir)/gst/videofilter/.libs/*videobalance.{so,dll,DLL,dylib} \ $(top_builddir)/gst/videofilter/.libs/*gamma.{so,dll,DLL,dylib} CRUFT_DIRS = \ $(top_srcdir)/gst/median \ $(top_srcdir)/gst/qtdemux \ $(top_srcdir)/gst/quicktime \ $(top_srcdir)/ext/annodex all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_srcdir)/common/win32.mak $(top_srcdir)/common/release.mak $(top_srcdir)/common/po.mak $(top_srcdir)/common/coverage/lcov.mak $(top_srcdir)/common/cruft.mak: $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 gst-plugins-good.spec: $(top_builddir)/config.status $(srcdir)/gst-plugins-good.spec.in cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(HEADERS) config.h all-local installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive html-am: info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-dvi-am: install-exec-am: install-html: install-html-recursive install-html-am: install-info: install-info-recursive install-info-am: install-man: install-pdf: install-pdf-recursive install-pdf-am: install-ps: install-ps-recursive install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(am__recursive_targets) all install-am install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--refresh check check-am clean clean-cscope clean-generic \ clean-libtool cscope cscopelist-am ctags ctags-am dist \ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ dist-tarZ dist-xz dist-zip distcheck distclean \ distclean-generic distclean-hdr distclean-libtool \ distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-am \ install-data install-data-am install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am win32-debug: @echo; \ echo win32 = $(win32); \ echo; \ echo win32defs = $(win32defs); \ echo; \ echo win32crlf = $(win32crlf); \ echo win32-check-crlf: @echo Checking win32 files for CR LF line endings ...; \ fail=0 ; \ for each in $(win32crlf) ; do \ result=`perl -e 'print grep(/\r\n/,<>)' "$$each" | wc -l`; \ if test "$$result" = 0 ; then \ echo $$each must be fixed to have CRLF line endings ; \ fail=1; \ fi ; \ done ; \ exit $$fail # make sure all symbols we export on linux are defined in the win32 .def too # (don't care about other unixes for now, it's enough if it works on one of # the linux build bots; we assume .so ) check-exports: @fail=0 ; \ for l in $(win32defs); do \ libbase=`basename "$$l" ".def"`; \ libso=`find "$(top_builddir)" -name "$$libbase-@GST_API_VERSION@.so" | grep -v /_build/ | head -n1`; \ libdef="$(top_srcdir)/win32/common/$$libbase.def"; \ if test "x$$libso" != "x"; then \ echo Checking symbols in $$libso; \ if ! ($(top_srcdir)/common/check-exports $$libdef $$libso) ; then \ fail=1; \ fi; \ fi; \ done ; \ if test $$fail != 0; then \ echo '-----------------------------------------------------------'; \ echo 'Run this to update the .def files:'; \ echo 'make update-exports'; \ echo '-----------------------------------------------------------'; \ fi; \ exit $$fail update-exports: make check-exports 2>&1 | patch -p1 git add win32/common/libgst*.def git diff --cached -- win32/common/ echo '^^^--- updated and staged changes above' # complain about nonportable printf format strings (%lld, %llu, %zu etc.) check-nonportable-print-format: @fail=0 ; \ loc=`find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'`; \ if test "x$$loc" != "x"; then \ echo "Please fix the following print format strings:" ; \ find "$(top_srcdir)" -name '*.c' | xargs grep -n -e '%[0-9]*ll[udx]' -e '%[0-9]*z[udx]'; \ fail=1; \ fi; \ exit $$fail dist-hook: check-exports win32-check-crlf release: dist @$(MAKE) $(PACKAGE)-$(VERSION).tar.xz.sha256sum @echo @echo "=================================================================================================" @echo "http://gstreamer.freedesktop.org/src/$(PACKAGE)/$(PACKAGE)-$(VERSION).tar.xz" @cat $(PACKAGE)-$(VERSION).tar.xz.sha256sum @echo "=================================================================================================" @if [ -d ~/releases/ ]; then \ cp -v $(PACKAGE)-$(VERSION).tar.xz ~/releases/; \ fi @if [ -d ../www/data/src ]; then \ mv -v $(PACKAGE)-$(VERSION).tar.xz ../www/data/src/$(PACKAGE)/ ; \ mv -v $(PACKAGE)-$(VERSION).tar.xz.sha256sum ../www/data/src/$(PACKAGE)/ ; \ fi @echo "=================================================================================================" # generate sha256 sum files %.sha256sum: % @sha256sum $< > $@ # check that no marshal or enumtypes files are included # this in turn ensures that distcheck fails for missing .list files which is currently # shadowed when the corresponding .c and .h files are included. distcheck-hook: @test "x" = "x`find $(distdir) -name \*-enumtypes.[ch] | grep -v win32`" && \ test "x" = "x`find $(distdir) -name \*-marshal.[ch]`" || \ ( echo "*** Leftover enumtypes or marshal files in the tarball." && \ echo "*** Make sure the following files are not disted:" && \ find $(distdir) -name \*-enumtypes.[ch] | grep -v win32 && \ find $(distdir) -name \*-marshal.[ch] && \ false ) # rule to download the latest .po files download-po: $(top_srcdir)/common/download-translations $(top_srcdir)/common/download-translations $(PACKAGE) check-valgrind: cd tests/check && make check-valgrind @HAVE_GST_CHECK_TRUE@check-torture: @HAVE_GST_CHECK_TRUE@ cd tests/check && make torture @HAVE_GST_CHECK_FALSE@check-torture: @HAVE_GST_CHECK_FALSE@ true win32-update: cp $(top_builddir)/win32/common/config.h-new \ $(top_srcdir)/win32/common/config.h .PHONY: lcov-reset lcov lcov-run lcov-report lcov-upload lcov-clean # run lcov from scratch, always lcov-reset: $(MAKE) lcov-run $(MAKE) lcov-report # run lcov from scratch if the dir is not there lcov: $(MAKE) lcov-reset # reset lcov stats @GST_GCOV_ENABLED_TRUE@lcov-clean: @GST_GCOV_ENABLED_TRUE@ @-rm -rf lcov @GST_GCOV_ENABLED_TRUE@ lcov --directory . --zerocounters # reset run coverage tests @GST_GCOV_ENABLED_TRUE@lcov-run: @GST_GCOV_ENABLED_TRUE@ -$(MAKE) lcov-clean @GST_GCOV_ENABLED_TRUE@ -if test -d tests/check; then $(MAKE) -C tests/check inspect; fi @GST_GCOV_ENABLED_TRUE@ -$(MAKE) check # generate report based on current coverage data @GST_GCOV_ENABLED_TRUE@lcov-report: @GST_GCOV_ENABLED_TRUE@ mkdir lcov @GST_GCOV_ENABLED_TRUE@ lcov --compat-libtool --directory . --capture --output-file lcov/lcov.info @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d\| -f1 > lcov/remove @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "tests/check/" | cut -d\| -f1 >> lcov/remove @GST_GCOV_ENABLED_TRUE@ lcov --list-full-path -l lcov/lcov.info | grep "docs/plugins/" | cut -d\| -f1 >> lcov/remove @GST_GCOV_ENABLED_TRUE@ lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info @GST_GCOV_ENABLED_TRUE@ rm lcov/remove @GST_GCOV_ENABLED_TRUE@ mv lcov/lcov.cleaned.info lcov/lcov.info @GST_GCOV_ENABLED_TRUE@ genhtml -t "$(PACKAGE_STRING)" -o lcov --num-spaces 2 lcov/lcov.info @GST_GCOV_ENABLED_TRUE@lcov-upload: lcov @GST_GCOV_ENABLED_TRUE@ rsync -rvz -e ssh --delete lcov/* gstreamer.freedesktop.org:/srv/gstreamer.freedesktop.org/www/data/coverage/lcov/$(PACKAGE) @GST_GCOV_ENABLED_FALSE@lcov-run: @GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov" @GST_GCOV_ENABLED_FALSE@lcov-report: @GST_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov" check-cruft: @cruft_files=""; cruft_dirs=""; \ for f in $(CRUFT_FILES); do \ if test -e $$f; then \ cruft_files="$$cruft_files $$f"; \ fi \ done; \ for d in $(CRUFT_DIRS); do \ if test -e $$d; then \ cruft_dirs="$$cruft_dirs $$d"; \ fi \ done; \ if test "x$$cruft_files$$cruft_dirs" != x; then \ echo; \ echo "**** CRUFT ALERT *****"; \ echo; \ echo "The following files and directories may not be needed any "; \ echo "longer (usually because a plugin has been merged into "; \ echo "another plugin, moved to a different module, or been "; \ echo "renamed), and you probably want to clean them up if you "; \ echo "don't have local changes: "; \ echo; \ for f in $$cruft_files; do echo "file $$f"; done; \ echo; \ for d in $$cruft_dirs; do echo "directory $$d"; done; \ echo; \ echo "'make clean-cruft' will remove these for you."; \ echo; \ fi clean-cruft-dirs: @for d in $(CRUFT_DIRS); do \ if test -e $$d; then \ rm -r "$$d" && echo "Removed directory $$d"; \ fi \ done clean-cruft-files: @for f in $(CRUFT_FILES); do \ if test -e $$f; then \ rm "$$f" && echo "Removed file $$f"; \ fi \ done clean-cruft: clean-cruft-dirs clean-cruft-files # also might want to add this to your Makefile.am: # # all-local: check-cruft all-local: check-cruft # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: