/* GStreamer * Copyright (C) 2005 Wim Taymans * Copyright (C) 2008 Mark Nauwelaerts * Copyright (C) 2010 Sebastian Dröge * * gstcollectpads.c: * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, * Boston, MA 02110-1301, USA. */ /** * SECTION:gstcollectpads * @short_description: manages a set of pads that operate in collect mode * @see_also: * * Manages a set of pads that operate in collect mode. This means that control * is given to the manager of this object when all pads have data. * * * Collectpads are created with gst_collect_pads_new(). A callback should then * be installed with gst_collect_pads_set_function (). * * * Pads are added to the collection with gst_collect_pads_add_pad()/ * gst_collect_pads_remove_pad(). The pad * has to be a sinkpad. The chain and event functions of the pad are * overridden. The element_private of the pad is used to store * private information for the collectpads. * * * For each pad, data is queued in the _chain function or by * performing a pull_range. * * * When data is queued on all pads in waiting mode, the callback function is called. * * * Data can be dequeued from the pad with the gst_collect_pads_pop() method. * One can peek at the data with the gst_collect_pads_peek() function. * These functions will return NULL if the pad received an EOS event. When all * pads return NULL from a gst_collect_pads_peek(), the element can emit an EOS * event itself. * * * Data can also be dequeued in byte units using the gst_collect_pads_available(), * gst_collect_pads_read_buffer() and gst_collect_pads_flush() calls. * * * Elements should call gst_collect_pads_start() and gst_collect_pads_stop() in * their state change functions to start and stop the processing of the collectpads. * The gst_collect_pads_stop() call should be called before calling the parent * element state change function in the PAUSED_TO_READY state change to ensure * no pad is blocked and the element can finish streaming. * * * gst_collect_pads_collect() and gst_collect_pads_collect_range() can be used by * elements that start a #GstTask to drive the collect_pads. This feature is however * not yet implemented. * * * gst_collect_pads_set_waiting() sets a pad to waiting or non-waiting mode. * CollectPads element is not waiting for data to be collected on non-waiting pads. * Thus these pads may but need not have data when the callback is called. * All pads are in waiting mode by default. * * * * Last reviewed on 2011-10-28 (0.10.36) */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include "gstcollectpads.h" #include "../../../gst/glib-compat-private.h" GST_DEBUG_CATEGORY_STATIC (collect_pads_debug); #define GST_CAT_DEFAULT collect_pads_debug #define parent_class gst_collect_pads_parent_class G_DEFINE_TYPE (GstCollectPads, gst_collect_pads, GST_TYPE_OBJECT); struct _GstCollectDataPrivate { /* refcounting for struct, and destroy callback */ GstCollectDataDestroyNotify destroy_notify; gint refcount; }; struct _GstCollectPadsPrivate { /* with LOCK and/or STREAM_LOCK */ gboolean started; /* with STREAM_LOCK */ guint32 cookie; /* @data list cookie */ guint numpads; /* number of pads in @data */ guint queuedpads; /* number of pads with a buffer */ guint eospads; /* number of pads that are EOS */ GstClockTime earliest_time; /* Current earliest time */ GstCollectData *earliest_data; /* Pad data for current earliest time */ /* with LOCK */ GSList *pad_list; /* updated pad list */ guint32 pad_cookie; /* updated cookie */ GstCollectPadsFunction func; /* function and user_data for callback */ gpointer user_data; GstCollectPadsBufferFunction buffer_func; /* function and user_data for buffer callback */ gpointer buffer_user_data; GstCollectPadsCompareFunction compare_func; gpointer compare_user_data; GstCollectPadsEventFunction event_func; /* function and data for event callback */ gpointer event_user_data; GstCollectPadsQueryFunction query_func; gpointer query_user_data; GstCollectPadsClipFunction clip_func; gpointer clip_user_data; /* no other lock needed */ GMutex evt_lock; /* these make up sort of poor man's event signaling */ GCond evt_cond; guint32 evt_cookie; }; static void gst_collect_pads_clear (GstCollectPads * pads, GstCollectData * data); static GstFlowReturn gst_collect_pads_chain (GstPad * pad, GstObject * parent, GstBuffer * buffer); static gboolean gst_collect_pads_event (GstPad * pad, GstObject * parent, GstEvent * event); static gboolean gst_collect_pads_query (GstPad * pad, GstObject * parent, GstQuery * query); static void gst_collect_pads_finalize (GObject * object); static GstFlowReturn gst_collect_pads_default_collected (GstCollectPads * pads, gpointer user_data); static gint gst_collect_pads_default_compare_func (GstCollectPads * pads, GstCollectData * data1, GstClockTime timestamp1, GstCollectData * data2, GstClockTime timestamp2, gpointer user_data); static gboolean gst_collect_pads_recalculate_full (GstCollectPads * pads); static void ref_data (GstCollectData * data); static void unref_data (GstCollectData * data); static gboolean gst_collect_pads_event_default_internal (GstCollectPads * pads, GstCollectData * data, GstEvent * event, gpointer user_data); static gboolean gst_collect_pads_query_default_internal (GstCollectPads * pads, GstCollectData * data, GstQuery * query, gpointer user_data); /* Some properties are protected by LOCK, others by STREAM_LOCK * However, manipulating either of these partitions may require * to signal/wake a _WAIT, so use a separate (sort of) event to prevent races * Alternative implementations are possible, e.g. some low-level re-implementing * of the 2 above locks to drop both of them atomically when going into _WAIT. */ #define GST_COLLECT_PADS_GET_EVT_COND(pads) (&((GstCollectPads *)pads)->priv->evt_cond) #define GST_COLLECT_PADS_GET_EVT_LOCK(pads) (&((GstCollectPads *)pads)->priv->evt_lock) #define GST_COLLECT_PADS_EVT_WAIT(pads, cookie) G_STMT_START { \ g_mutex_lock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ /* should work unless a lot of event'ing and thread starvation */\ while (cookie == ((GstCollectPads *) pads)->priv->evt_cookie) \ g_cond_wait (GST_COLLECT_PADS_GET_EVT_COND (pads), \ GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ cookie = ((GstCollectPads *) pads)->priv->evt_cookie; \ g_mutex_unlock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ } G_STMT_END #define GST_COLLECT_PADS_EVT_WAIT_TIMED(pads, cookie, timeout) G_STMT_START { \ GTimeVal __tv; \ \ g_get_current_time (&tv); \ g_time_val_add (&tv, timeout); \ \ g_mutex_lock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ /* should work unless a lot of event'ing and thread starvation */\ while (cookie == ((GstCollectPads *) pads)->priv->evt_cookie) \ g_cond_timed_wait (GST_COLLECT_PADS_GET_EVT_COND (pads), \ GST_COLLECT_PADS_GET_EVT_LOCK (pads), &tv); \ cookie = ((GstCollectPads *) pads)->priv->evt_cookie; \ g_mutex_unlock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ } G_STMT_END #define GST_COLLECT_PADS_EVT_BROADCAST(pads) G_STMT_START { \ g_mutex_lock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ /* never mind wrap-around */ \ ++(((GstCollectPads *) pads)->priv->evt_cookie); \ g_cond_broadcast (GST_COLLECT_PADS_GET_EVT_COND (pads)); \ g_mutex_unlock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ } G_STMT_END #define GST_COLLECT_PADS_EVT_INIT(cookie) G_STMT_START { \ g_mutex_lock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ cookie = ((GstCollectPads *) pads)->priv->evt_cookie; \ g_mutex_unlock (GST_COLLECT_PADS_GET_EVT_LOCK (pads)); \ } G_STMT_END static void gst_collect_pads_class_init (GstCollectPadsClass * klass) { GObjectClass *gobject_class = (GObjectClass *) klass; g_type_class_add_private (klass, sizeof (GstCollectPadsPrivate)); GST_DEBUG_CATEGORY_INIT (collect_pads_debug, "collectpads", 0, "GstCollectPads"); gobject_class->finalize = GST_DEBUG_FUNCPTR (gst_collect_pads_finalize); } static void gst_collect_pads_init (GstCollectPads * pads) { pads->priv = G_TYPE_INSTANCE_GET_PRIVATE (pads, GST_TYPE_COLLECT_PADS, GstCollectPadsPrivate); pads->data = NULL; pads->priv->cookie = 0; pads->priv->numpads = 0; pads->priv->queuedpads = 0; pads->priv->eospads = 0; pads->priv->started = FALSE; g_rec_mutex_init (&pads->stream_lock); pads->priv->func = gst_collect_pads_default_collected; pads->priv->user_data = NULL; pads->priv->event_func = NULL; pads->priv->event_user_data = NULL; /* members for default muxing */ pads->priv->buffer_func = NULL; pads->priv->buffer_user_data = NULL; pads->priv->compare_func = gst_collect_pads_default_compare_func; pads->priv->compare_user_data = NULL; pads->priv->earliest_data = NULL; pads->priv->earliest_time = GST_CLOCK_TIME_NONE; pads->priv->event_func = gst_collect_pads_event_default_internal; pads->priv->query_func = gst_collect_pads_query_default_internal; /* members to manage the pad list */ pads->priv->pad_cookie = 0; pads->priv->pad_list = NULL; /* members for event */ g_mutex_init (&pads->priv->evt_lock); g_cond_init (&pads->priv->evt_cond); pads->priv->evt_cookie = 0; } static void gst_collect_pads_finalize (GObject * object) { GstCollectPads *pads = GST_COLLECT_PADS (object); GST_DEBUG_OBJECT (object, "finalize"); g_rec_mutex_clear (&pads->stream_lock); g_cond_clear (&pads->priv->evt_cond); g_mutex_clear (&pads->priv->evt_lock); /* Remove pads and free pads list */ g_slist_foreach (pads->priv->pad_list, (GFunc) unref_data, NULL); g_slist_foreach (pads->data, (GFunc) unref_data, NULL); g_slist_free (pads->data); g_slist_free (pads->priv->pad_list); G_OBJECT_CLASS (parent_class)->finalize (object); } /** * gst_collect_pads_new: * * Create a new instance of #GstCollectPads. * * MT safe. * * Returns: (transfer full): a new #GstCollectPads, or NULL in case of an error. */ GstCollectPads * gst_collect_pads_new (void) { GstCollectPads *newcoll; newcoll = g_object_new (GST_TYPE_COLLECT_PADS, NULL); return newcoll; } /* Must be called with GstObject lock! */ static void gst_collect_pads_set_buffer_function_locked (GstCollectPads * pads, GstCollectPadsBufferFunction func, gpointer user_data) { pads->priv->buffer_func = func; pads->priv->buffer_user_data = user_data; } /** * gst_collect_pads_set_buffer_function: * @pads: the collectpads to use * @func: the function to set * @user_data: (closure): user data passed to the function * * Set the callback function and user data that will be called with * the oldest buffer when all pads have been collected, or NULL on EOS. * If a buffer is passed, the callback owns a reference and must unref * it. * * MT safe. */ void gst_collect_pads_set_buffer_function (GstCollectPads * pads, GstCollectPadsBufferFunction func, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_OBJECT_LOCK (pads); gst_collect_pads_set_buffer_function_locked (pads, func, user_data); GST_OBJECT_UNLOCK (pads); } /** * gst_collect_pads_set_compare_function: * @pads: the pads to use * @func: the function to set * @user_data: (closure): user data passed to the function * * Set the timestamp comparison function. * * MT safe. */ /* NOTE allowing to change comparison seems not advisable; no known use-case, and collaboration with default algorithm is unpredictable. If custom compairing/operation is needed, just use a collect function of your own */ void gst_collect_pads_set_compare_function (GstCollectPads * pads, GstCollectPadsCompareFunction func, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_OBJECT_LOCK (pads); pads->priv->compare_func = func; pads->priv->compare_user_data = user_data; GST_OBJECT_UNLOCK (pads); } /** * gst_collect_pads_set_function: * @pads: the collectpads to use * @func: the function to set * @user_data: user data passed to the function * * CollectPads provides a default collection algorithm that will determine * the oldest buffer available on all of its pads, and then delegate * to a configured callback. * However, if circumstances are more complicated and/or more control * is desired, this sets a callback that will be invoked instead when * all the pads added to the collection have buffers queued. * Evidently, this callback is not compatible with * gst_collect_pads_set_buffer_function() callback. * If this callback is set, the former will be unset. * * MT safe. */ void gst_collect_pads_set_function (GstCollectPads * pads, GstCollectPadsFunction func, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_OBJECT_LOCK (pads); pads->priv->func = func; pads->priv->user_data = user_data; gst_collect_pads_set_buffer_function_locked (pads, NULL, NULL); GST_OBJECT_UNLOCK (pads); } static void ref_data (GstCollectData * data) { g_assert (data != NULL); g_atomic_int_inc (&(data->priv->refcount)); } static void unref_data (GstCollectData * data) { g_assert (data != NULL); g_assert (data->priv->refcount > 0); if (!g_atomic_int_dec_and_test (&(data->priv->refcount))) return; if (data->priv->destroy_notify) data->priv->destroy_notify (data); g_object_unref (data->pad); if (data->buffer) { gst_buffer_unref (data->buffer); } g_free (data->priv); g_free (data); } /** * gst_collect_pads_set_event_function: * @pads: the collectpads to use * @func: the function to set * @user_data: user data passed to the function * * Set the event callback function and user data that will be called when * collectpads has received an event originating from one of the collected * pads. If the event being processed is a serialized one, this callback is * called with @pads STREAM_LOCK held, otherwise not. As this lock should be * held when calling a number of CollectPads functions, it should be acquired * if so (unusually) needed. * * MT safe. */ void gst_collect_pads_set_event_function (GstCollectPads * pads, GstCollectPadsEventFunction func, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_OBJECT_LOCK (pads); pads->priv->event_func = func; pads->priv->event_user_data = user_data; GST_OBJECT_UNLOCK (pads); } /** * gst_collect_pads_set_query_function: * @pads: the collectpads to use * @func: the function to set * @user_data: user data passed to the function * * Set the query callback function and user data that will be called after * collectpads has received a query originating from one of the collected * pads. If the query being processed is a serialized one, this callback is * called with @pads STREAM_LOCK held, otherwise not. As this lock should be * held when calling a number of CollectPads functions, it should be acquired * if so (unusually) needed. * * MT safe. */ void gst_collect_pads_set_query_function (GstCollectPads * pads, GstCollectPadsQueryFunction func, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_OBJECT_LOCK (pads); pads->priv->query_func = func; pads->priv->query_user_data = user_data; GST_OBJECT_UNLOCK (pads); } /** * gst_collect_pads_clip_running_time: * @pads: the collectpads to use * @cdata: collect data of corresponding pad * @buf: buffer being clipped * @outbuf: (allow-none): output buffer with running time, or NULL if clipped * @user_data: user data (unused) * * Convenience clipping function that converts incoming buffer's timestamp * to running time, or clips the buffer if outside configured segment. */ GstFlowReturn gst_collect_pads_clip_running_time (GstCollectPads * pads, GstCollectData * cdata, GstBuffer * buf, GstBuffer ** outbuf, gpointer user_data) { GstClockTime time; *outbuf = buf; time = GST_BUFFER_PTS (buf); /* invalid left alone and passed */ if (G_LIKELY (GST_CLOCK_TIME_IS_VALID (time))) { time = gst_segment_to_running_time (&cdata->segment, GST_FORMAT_TIME, time); if (G_UNLIKELY (!GST_CLOCK_TIME_IS_VALID (time))) { GST_DEBUG_OBJECT (cdata->pad, "clipping buffer on pad outside segment"); gst_buffer_unref (buf); *outbuf = NULL; } else { GST_LOG_OBJECT (cdata->pad, "buffer ts %" GST_TIME_FORMAT " -> %" GST_TIME_FORMAT " running time", GST_TIME_ARGS (GST_BUFFER_PTS (buf)), GST_TIME_ARGS (time)); *outbuf = gst_buffer_make_writable (buf); GST_BUFFER_PTS (*outbuf) = time; GST_BUFFER_DTS (*outbuf) = gst_segment_to_running_time (&cdata->segment, GST_FORMAT_TIME, GST_BUFFER_DTS (*outbuf)); } } return GST_FLOW_OK; } /** * gst_collect_pads_set_clip_function: * @pads: the collectpads to use * @clipfunc: clip function to install * @user_data: user data to pass to @clip_func * * Install a clipping function that is called right after a buffer is received * on a pad managed by @pads. See #GstCollectPadsClipFunction for more info. */ void gst_collect_pads_set_clip_function (GstCollectPads * pads, GstCollectPadsClipFunction clipfunc, gpointer user_data) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); pads->priv->clip_func = clipfunc; pads->priv->clip_user_data = user_data; } /** * gst_collect_pads_add_pad: * @pads: the collectpads to use * @pad: (transfer none): the pad to add * @size: the size of the returned #GstCollectData structure * @destroy_notify: function to be called before the returned #GstCollectData * structure is freed * @lock: whether to lock this pad in usual waiting state * * Add a pad to the collection of collect pads. The pad has to be * a sinkpad. The refcount of the pad is incremented. Use * gst_collect_pads_remove_pad() to remove the pad from the collection * again. * * You specify a size for the returned #GstCollectData structure * so that you can use it to store additional information. * * You can also specify a #GstCollectDataDestroyNotify that will be called * just before the #GstCollectData structure is freed. It is passed the * pointer to the structure and should free any custom memory and resources * allocated for it. * * Keeping a pad locked in waiting state is only relevant when using * the default collection algorithm (providing the oldest buffer). * It ensures a buffer must be available on this pad for a collection * to take place. This is of typical use to a muxer element where * non-subtitle streams should always be in waiting state, * e.g. to assure that caps information is available on all these streams * when initial headers have to be written. * * The pad will be automatically activated in push mode when @pads is * started. * * MT safe. * * Returns: a new #GstCollectData to identify the new pad. Or NULL * if wrong parameters are supplied. */ GstCollectData * gst_collect_pads_add_pad (GstCollectPads * pads, GstPad * pad, guint size, GstCollectDataDestroyNotify destroy_notify, gboolean lock) { GstCollectData *data; g_return_val_if_fail (pads != NULL, NULL); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), NULL); g_return_val_if_fail (pad != NULL, NULL); g_return_val_if_fail (GST_PAD_IS_SINK (pad), NULL); g_return_val_if_fail (size >= sizeof (GstCollectData), NULL); GST_DEBUG_OBJECT (pads, "adding pad %s:%s", GST_DEBUG_PAD_NAME (pad)); data = g_malloc0 (size); data->priv = g_new0 (GstCollectDataPrivate, 1); data->collect = pads; data->pad = gst_object_ref (pad); data->buffer = NULL; data->pos = 0; gst_segment_init (&data->segment, GST_FORMAT_UNDEFINED); data->state = GST_COLLECT_PADS_STATE_WAITING; data->state |= lock ? GST_COLLECT_PADS_STATE_LOCKED : 0; data->priv->refcount = 1; data->priv->destroy_notify = destroy_notify; GST_OBJECT_LOCK (pads); GST_OBJECT_LOCK (pad); gst_pad_set_element_private (pad, data); GST_OBJECT_UNLOCK (pad); pads->priv->pad_list = g_slist_append (pads->priv->pad_list, data); gst_pad_set_chain_function (pad, GST_DEBUG_FUNCPTR (gst_collect_pads_chain)); gst_pad_set_event_function (pad, GST_DEBUG_FUNCPTR (gst_collect_pads_event)); gst_pad_set_query_function (pad, GST_DEBUG_FUNCPTR (gst_collect_pads_query)); /* backward compat, also add to data if stopped, so that the element already * has this in the public data list before going PAUSED (typically) * this can only be done when we are stopped because we don't take the * STREAM_LOCK to protect the pads->data list. */ if (!pads->priv->started) { pads->data = g_slist_append (pads->data, data); ref_data (data); } /* activate the pad when needed */ if (pads->priv->started) gst_pad_set_active (pad, TRUE); pads->priv->pad_cookie++; GST_OBJECT_UNLOCK (pads); return data; } static gint find_pad (GstCollectData * data, GstPad * pad) { if (data->pad == pad) return 0; return 1; } /** * gst_collect_pads_remove_pad: * @pads: the collectpads to use * @pad: (transfer none): the pad to remove * * Remove a pad from the collection of collect pads. This function will also * free the #GstCollectData and all the resources that were allocated with * gst_collect_pads_add_pad(). * * The pad will be deactivated automatically when @pads is stopped. * * MT safe. * * Returns: %TRUE if the pad could be removed. */ gboolean gst_collect_pads_remove_pad (GstCollectPads * pads, GstPad * pad) { GstCollectData *data; GSList *list; g_return_val_if_fail (pads != NULL, FALSE); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), FALSE); g_return_val_if_fail (pad != NULL, FALSE); g_return_val_if_fail (GST_IS_PAD (pad), FALSE); GST_DEBUG_OBJECT (pads, "removing pad %s:%s", GST_DEBUG_PAD_NAME (pad)); GST_OBJECT_LOCK (pads); list = g_slist_find_custom (pads->priv->pad_list, pad, (GCompareFunc) find_pad); if (!list) goto unknown_pad; data = (GstCollectData *) list->data; GST_DEBUG_OBJECT (pads, "found pad %s:%s at %p", GST_DEBUG_PAD_NAME (pad), data); /* clear the stuff we configured */ gst_pad_set_chain_function (pad, NULL); gst_pad_set_event_function (pad, NULL); GST_OBJECT_LOCK (pad); gst_pad_set_element_private (pad, NULL); GST_OBJECT_UNLOCK (pad); /* backward compat, also remove from data if stopped, note that this function * can only be called when we are stopped because we don't take the * STREAM_LOCK to protect the pads->data list. */ if (!pads->priv->started) { GSList *dlist; dlist = g_slist_find_custom (pads->data, pad, (GCompareFunc) find_pad); if (dlist) { GstCollectData *pdata = dlist->data; pads->data = g_slist_delete_link (pads->data, dlist); unref_data (pdata); } } /* remove from the pad list */ pads->priv->pad_list = g_slist_delete_link (pads->priv->pad_list, list); pads->priv->pad_cookie++; /* signal waiters because something changed */ GST_COLLECT_PADS_EVT_BROADCAST (pads); /* deactivate the pad when needed */ if (!pads->priv->started) gst_pad_set_active (pad, FALSE); /* clean and free the collect data */ unref_data (data); GST_OBJECT_UNLOCK (pads); return TRUE; unknown_pad: { GST_WARNING_OBJECT (pads, "cannot remove unknown pad %s:%s", GST_DEBUG_PAD_NAME (pad)); GST_OBJECT_UNLOCK (pads); return FALSE; } } /* * Must be called with STREAM_LOCK. */ static void gst_collect_pads_set_flushing_unlocked (GstCollectPads * pads, gboolean flushing) { GSList *walk = NULL; /* Update the pads flushing flag */ for (walk = pads->data; walk; walk = g_slist_next (walk)) { GstCollectData *cdata = walk->data; if (GST_IS_PAD (cdata->pad)) { GST_OBJECT_LOCK (cdata->pad); if (flushing) GST_PAD_SET_FLUSHING (cdata->pad); else GST_PAD_UNSET_FLUSHING (cdata->pad); if (flushing) GST_COLLECT_PADS_STATE_SET (cdata, GST_COLLECT_PADS_STATE_FLUSHING); else GST_COLLECT_PADS_STATE_UNSET (cdata, GST_COLLECT_PADS_STATE_FLUSHING); gst_collect_pads_clear (pads, cdata); GST_OBJECT_UNLOCK (cdata->pad); } } /* inform _chain of changes */ GST_COLLECT_PADS_EVT_BROADCAST (pads); } /** * gst_collect_pads_set_flushing: * @pads: the collectpads to use * @flushing: desired state of the pads * * Change the flushing state of all the pads in the collection. No pad * is able to accept anymore data when @flushing is %TRUE. Calling this * function with @flushing %FALSE makes @pads accept data again. * Caller must ensure that downstream streaming (thread) is not blocked, * e.g. by sending a FLUSH_START downstream. * * MT safe. */ void gst_collect_pads_set_flushing (GstCollectPads * pads, gboolean flushing) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); /* NOTE since this eventually calls _pop, some (STREAM_)LOCK is needed here */ GST_COLLECT_PADS_STREAM_LOCK (pads); gst_collect_pads_set_flushing_unlocked (pads, flushing); GST_COLLECT_PADS_STREAM_UNLOCK (pads); } /** * gst_collect_pads_start: * @pads: the collectpads to use * * Starts the processing of data in the collect_pads. * * MT safe. */ void gst_collect_pads_start (GstCollectPads * pads) { GSList *collected; g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_DEBUG_OBJECT (pads, "starting collect pads"); /* make sure stop and collect cannot be called anymore */ GST_COLLECT_PADS_STREAM_LOCK (pads); /* make pads streamable */ GST_OBJECT_LOCK (pads); /* loop over the master pad list and reset the segment */ collected = pads->priv->pad_list; for (; collected; collected = g_slist_next (collected)) { GstCollectData *data; data = collected->data; gst_segment_init (&data->segment, GST_FORMAT_UNDEFINED); } gst_collect_pads_set_flushing_unlocked (pads, FALSE); /* Start collect pads */ pads->priv->started = TRUE; GST_OBJECT_UNLOCK (pads); GST_COLLECT_PADS_STREAM_UNLOCK (pads); } /** * gst_collect_pads_stop: * @pads: the collectpads to use * * Stops the processing of data in the collect_pads. this function * will also unblock any blocking operations. * * MT safe. */ void gst_collect_pads_stop (GstCollectPads * pads) { GSList *collected; g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); GST_DEBUG_OBJECT (pads, "stopping collect pads"); /* make sure collect and start cannot be called anymore */ GST_COLLECT_PADS_STREAM_LOCK (pads); /* make pads not accept data anymore */ GST_OBJECT_LOCK (pads); gst_collect_pads_set_flushing_unlocked (pads, TRUE); /* Stop collect pads */ pads->priv->started = FALSE; pads->priv->eospads = 0; pads->priv->queuedpads = 0; /* loop over the master pad list and flush buffers */ collected = pads->priv->pad_list; for (; collected; collected = g_slist_next (collected)) { GstCollectData *data; GstBuffer **buffer_p; data = collected->data; if (data->buffer) { buffer_p = &data->buffer; gst_buffer_replace (buffer_p, NULL); data->pos = 0; } GST_COLLECT_PADS_STATE_UNSET (data, GST_COLLECT_PADS_STATE_EOS); } if (pads->priv->earliest_data) unref_data (pads->priv->earliest_data); pads->priv->earliest_data = NULL; pads->priv->earliest_time = GST_CLOCK_TIME_NONE; GST_OBJECT_UNLOCK (pads); /* Wake them up so they can end the chain functions. */ GST_COLLECT_PADS_EVT_BROADCAST (pads); GST_COLLECT_PADS_STREAM_UNLOCK (pads); } /** * gst_collect_pads_peek: * @pads: the collectpads to peek * @data: the data to use * * Peek at the buffer currently queued in @data. This function * should be called with the @pads STREAM_LOCK held, such as in the callback * handler. * * MT safe. * * Returns: The buffer in @data or NULL if no buffer is queued. * should unref the buffer after usage. */ GstBuffer * gst_collect_pads_peek (GstCollectPads * pads, GstCollectData * data) { GstBuffer *result; g_return_val_if_fail (pads != NULL, NULL); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), NULL); g_return_val_if_fail (data != NULL, NULL); if ((result = data->buffer)) gst_buffer_ref (result); GST_DEBUG_OBJECT (pads, "Peeking at pad %s:%s: buffer=%p", GST_DEBUG_PAD_NAME (data->pad), result); return result; } /** * gst_collect_pads_pop: * @pads: the collectpads to pop * @data: the data to use * * Pop the buffer currently queued in @data. This function * should be called with the @pads STREAM_LOCK held, such as in the callback * handler. * * MT safe. * * Returns: (transfer full): The buffer in @data or NULL if no buffer was * queued. You should unref the buffer after usage. */ GstBuffer * gst_collect_pads_pop (GstCollectPads * pads, GstCollectData * data) { GstBuffer *result; g_return_val_if_fail (pads != NULL, NULL); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), NULL); g_return_val_if_fail (data != NULL, NULL); if ((result = data->buffer)) { data->buffer = NULL; data->pos = 0; /* one less pad with queued data now */ if (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) pads->priv->queuedpads--; } GST_COLLECT_PADS_EVT_BROADCAST (pads); GST_DEBUG_OBJECT (pads, "Pop buffer on pad %s:%s: buffer=%p", GST_DEBUG_PAD_NAME (data->pad), result); return result; } /* pop and unref the currently queued buffer, should be called with STREAM_LOCK * held */ static void gst_collect_pads_clear (GstCollectPads * pads, GstCollectData * data) { GstBuffer *buf; if ((buf = gst_collect_pads_pop (pads, data))) gst_buffer_unref (buf); } /** * gst_collect_pads_available: * @pads: the collectpads to query * * Query how much bytes can be read from each queued buffer. This means * that the result of this call is the maximum number of bytes that can * be read from each of the pads. * * This function should be called with @pads STREAM_LOCK held, such as * in the callback. * * MT safe. * * Returns: The maximum number of bytes queued on all pads. This function * returns 0 if a pad has no queued buffer. */ /* we might pre-calculate this in some struct field, * but would then have to maintain this in _chain and particularly _pop, etc, * even if element is never interested in this information */ guint gst_collect_pads_available (GstCollectPads * pads) { GSList *collected; guint result = G_MAXUINT; g_return_val_if_fail (pads != NULL, 0); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), 0); collected = pads->data; for (; collected; collected = g_slist_next (collected)) { GstCollectData *pdata; GstBuffer *buffer; gint size; pdata = (GstCollectData *) collected->data; /* ignore pad with EOS */ if (G_UNLIKELY (GST_COLLECT_PADS_STATE_IS_SET (pdata, GST_COLLECT_PADS_STATE_EOS))) { GST_DEBUG_OBJECT (pads, "pad %p is EOS", pdata); continue; } /* an empty buffer without EOS is weird when we get here.. */ if (G_UNLIKELY ((buffer = pdata->buffer) == NULL)) { GST_WARNING_OBJECT (pads, "pad %p has no buffer", pdata); goto not_filled; } /* this is the size left of the buffer */ size = gst_buffer_get_size (buffer) - pdata->pos; GST_DEBUG_OBJECT (pads, "pad %p has %d bytes left", pdata, size); /* need to return the min of all available data */ if (size < result) result = size; } /* nothing changed, all must be EOS then, return 0 */ if (G_UNLIKELY (result == G_MAXUINT)) result = 0; return result; not_filled: { return 0; } } /** * gst_collect_pads_flush: * @pads: the collectpads to query * @data: the data to use * @size: the number of bytes to flush * * Flush @size bytes from the pad @data. * * This function should be called with @pads STREAM_LOCK held, such as * in the callback. * * MT safe. * * Returns: The number of bytes flushed This can be less than @size and * is 0 if the pad was end-of-stream. */ guint gst_collect_pads_flush (GstCollectPads * pads, GstCollectData * data, guint size) { guint flushsize; gsize bsize; GstBuffer *buffer; g_return_val_if_fail (pads != NULL, 0); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), 0); g_return_val_if_fail (data != NULL, 0); /* no buffer, must be EOS */ if ((buffer = data->buffer) == NULL) return 0; bsize = gst_buffer_get_size (buffer); /* this is what we can flush at max */ flushsize = MIN (size, bsize - data->pos); data->pos += size; if (data->pos >= bsize) /* _clear will also reset data->pos to 0 */ gst_collect_pads_clear (pads, data); return flushsize; } /** * gst_collect_pads_read_buffer: * @pads: the collectpads to query * @data: the data to use * @size: the number of bytes to read * * Get a subbuffer of @size bytes from the given pad @data. * * This function should be called with @pads STREAM_LOCK held, such as in the * callback. * * MT safe. * * Returns: (transfer full): A sub buffer. The size of the buffer can be less that requested. * A return of NULL signals that the pad is end-of-stream. * Unref the buffer after use. */ GstBuffer * gst_collect_pads_read_buffer (GstCollectPads * pads, GstCollectData * data, guint size) { guint readsize; GstBuffer *buffer; g_return_val_if_fail (pads != NULL, NULL); g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), NULL); g_return_val_if_fail (data != NULL, NULL); /* no buffer, must be EOS */ if ((buffer = data->buffer) == NULL) return NULL; readsize = MIN (size, gst_buffer_get_size (buffer) - data->pos); return gst_buffer_copy_region (buffer, GST_BUFFER_COPY_ALL, data->pos, readsize); } /** * gst_collect_pads_take_buffer: * @pads: the collectpads to query * @data: the data to use * @size: the number of bytes to read * * Get a subbuffer of @size bytes from the given pad @data. Flushes the amount * of read bytes. * * This function should be called with @pads STREAM_LOCK held, such as in the * callback. * * MT safe. * * Returns: A sub buffer. The size of the buffer can be less that requested. * A return of NULL signals that the pad is end-of-stream. * Unref the buffer after use. */ GstBuffer * gst_collect_pads_take_buffer (GstCollectPads * pads, GstCollectData * data, guint size) { GstBuffer *buffer = gst_collect_pads_read_buffer (pads, data, size); if (buffer) { gst_collect_pads_flush (pads, data, gst_buffer_get_size (buffer)); } return buffer; } /** * gst_collect_pads_set_waiting: * @pads: the collectpads * @data: the data to use * @waiting: boolean indicating whether this pad should operate * in waiting or non-waiting mode * * Sets a pad to waiting or non-waiting mode, if at least this pad * has not been created with locked waiting state, * in which case nothing happens. * * This function should be called with @pads STREAM_LOCK held, such as * in the callback. * * MT safe. */ void gst_collect_pads_set_waiting (GstCollectPads * pads, GstCollectData * data, gboolean waiting) { g_return_if_fail (pads != NULL); g_return_if_fail (GST_IS_COLLECT_PADS (pads)); g_return_if_fail (data != NULL); GST_DEBUG_OBJECT (pads, "Setting pad %s to waiting %d, locked %d", GST_PAD_NAME (data->pad), waiting, GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_LOCKED)); /* Do something only on a change and if not locked */ if (!GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_LOCKED) && (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING) != ! !waiting)) { /* Set waiting state for this pad */ if (waiting) GST_COLLECT_PADS_STATE_SET (data, GST_COLLECT_PADS_STATE_WAITING); else GST_COLLECT_PADS_STATE_UNSET (data, GST_COLLECT_PADS_STATE_WAITING); /* Update number of queued pads if needed */ if (!data->buffer && !GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_EOS)) { if (waiting) pads->priv->queuedpads--; else pads->priv->queuedpads++; } /* signal waiters because something changed */ GST_COLLECT_PADS_EVT_BROADCAST (pads); } } /* see if pads were added or removed and update our stats. Any pad * added after releasing the LOCK will get collected in the next * round. * * We can do a quick check by checking the cookies, that get changed * whenever the pad list is updated. * * Must be called with STREAM_LOCK. */ static void gst_collect_pads_check_pads (GstCollectPads * pads) { /* the master list and cookie are protected with LOCK */ GST_OBJECT_LOCK (pads); if (G_UNLIKELY (pads->priv->pad_cookie != pads->priv->cookie)) { GSList *collected; /* clear list and stats */ g_slist_foreach (pads->data, (GFunc) unref_data, NULL); g_slist_free (pads->data); pads->data = NULL; pads->priv->numpads = 0; pads->priv->queuedpads = 0; pads->priv->eospads = 0; if (pads->priv->earliest_data) unref_data (pads->priv->earliest_data); pads->priv->earliest_data = NULL; pads->priv->earliest_time = GST_CLOCK_TIME_NONE; /* loop over the master pad list */ collected = pads->priv->pad_list; for (; collected; collected = g_slist_next (collected)) { GstCollectData *data; /* update the stats */ pads->priv->numpads++; data = collected->data; if (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_EOS)) pads->priv->eospads++; else if (data->buffer || !GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) pads->priv->queuedpads++; /* add to the list of pads to collect */ ref_data (data); /* preserve order of adding/requesting pads */ pads->data = g_slist_append (pads->data, data); } /* and update the cookie */ pads->priv->cookie = pads->priv->pad_cookie; } GST_OBJECT_UNLOCK (pads); } /* checks if all the pads are collected and call the collectfunction * * Should be called with STREAM_LOCK. * * Returns: The #GstFlowReturn of collection. */ static GstFlowReturn gst_collect_pads_check_collected (GstCollectPads * pads) { GstFlowReturn flow_ret = GST_FLOW_OK; GstCollectPadsFunction func; gpointer user_data; g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), GST_FLOW_ERROR); GST_OBJECT_LOCK (pads); func = pads->priv->func; user_data = pads->priv->user_data; GST_OBJECT_UNLOCK (pads); g_return_val_if_fail (pads->priv->func != NULL, GST_FLOW_NOT_SUPPORTED); /* check for new pads, update stats etc.. */ gst_collect_pads_check_pads (pads); if (G_UNLIKELY (pads->priv->eospads == pads->priv->numpads)) { /* If all our pads are EOS just collect once to let the element * do its final EOS handling. */ GST_DEBUG_OBJECT (pads, "All active pads (%d) are EOS, calling %s", pads->priv->numpads, GST_DEBUG_FUNCPTR_NAME (func)); flow_ret = func (pads, user_data); } else { gboolean collected = FALSE; /* We call the collected function as long as our condition matches. */ while (((pads->priv->queuedpads + pads->priv->eospads) >= pads->priv->numpads)) { GST_DEBUG_OBJECT (pads, "All active pads (%d + %d >= %d) have data, " "calling %s", pads->priv->queuedpads, pads->priv->eospads, pads->priv->numpads, GST_DEBUG_FUNCPTR_NAME (func)); flow_ret = func (pads, user_data); collected = TRUE; /* break on error */ if (flow_ret != GST_FLOW_OK) break; /* Don't keep looping after telling the element EOS or flushing */ if (pads->priv->queuedpads == 0) break; } if (!collected) GST_DEBUG_OBJECT (pads, "Not all active pads (%d) have data, continuing", pads->priv->numpads); } return flow_ret; } /* General overview: * - only pad with a buffer can determine earliest_data (and earliest_time) * - only segment info determines (non-)waiting state * - ? perhaps use _stream_time for comparison * (which muxers might have use as well ?) */ /* * Function to recalculate the waiting state of all pads. * * Must be called with STREAM_LOCK. * * Returns TRUE if a pad was set to waiting * (from non-waiting state). */ static gboolean gst_collect_pads_recalculate_waiting (GstCollectPads * pads) { GSList *collected; gboolean result = FALSE; /* If earliest time is not known, there is nothing to do. */ if (pads->priv->earliest_data == NULL) return FALSE; for (collected = pads->data; collected; collected = g_slist_next (collected)) { GstCollectData *data = (GstCollectData *) collected->data; int cmp_res; GstClockTime comp_time; /* check if pad has a segment */ if (data->segment.format == GST_FORMAT_UNDEFINED) { GST_WARNING_OBJECT (pads, "GstCollectPads has no time segment, assuming 0 based."); gst_segment_init (&data->segment, GST_FORMAT_TIME); GST_COLLECT_PADS_STATE_SET (data, GST_COLLECT_PADS_STATE_NEW_SEGMENT); } /* check segment format */ if (data->segment.format != GST_FORMAT_TIME) { GST_ERROR_OBJECT (pads, "GstCollectPads can handle only time segments."); continue; } /* check if the waiting state should be changed */ comp_time = data->segment.position; cmp_res = pads->priv->compare_func (pads, data, comp_time, pads->priv->earliest_data, pads->priv->earliest_time, pads->priv->compare_user_data); if (cmp_res > 0) /* stop waiting */ gst_collect_pads_set_waiting (pads, data, FALSE); else { if (!GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) { /* start waiting */ gst_collect_pads_set_waiting (pads, data, TRUE); result = TRUE; } } } return result; } /** * gst_collect_pads_find_best_pad: * @pads: the collectpads to use * @data: returns the collectdata for earliest data * @time: returns the earliest available buffertime * * Find the oldest/best pad, i.e. pad holding the oldest buffer and * and return the corresponding #GstCollectData and buffertime. * * This function should be called with STREAM_LOCK held, * such as in the callback. */ static void gst_collect_pads_find_best_pad (GstCollectPads * pads, GstCollectData ** data, GstClockTime * time) { GSList *collected; GstCollectData *best = NULL; GstClockTime best_time = GST_CLOCK_TIME_NONE; g_return_if_fail (data != NULL); g_return_if_fail (time != NULL); for (collected = pads->data; collected; collected = g_slist_next (collected)) { GstBuffer *buffer; GstCollectData *data = (GstCollectData *) collected->data; GstClockTime timestamp; buffer = gst_collect_pads_peek (pads, data); /* if we have a buffer check if it is better then the current best one */ if (buffer != NULL) { timestamp = GST_BUFFER_DTS (buffer); if (!GST_CLOCK_TIME_IS_VALID (timestamp)) { timestamp = GST_BUFFER_PTS (buffer); } gst_buffer_unref (buffer); if (best == NULL || pads->priv->compare_func (pads, data, timestamp, best, best_time, pads->priv->compare_user_data) < 0) { best = data; best_time = timestamp; } } } /* set earliest time */ *data = best; *time = best_time; GST_DEBUG_OBJECT (pads, "best pad %s, best time %" GST_TIME_FORMAT, best ? GST_PAD_NAME (((GstCollectData *) best)->pad) : "(nil)", GST_TIME_ARGS (best_time)); } /* * Function to recalculate earliest_data and earliest_timestamp. This also calls * gst_collect_pads_recalculate_waiting * * Must be called with STREAM_LOCK. */ static gboolean gst_collect_pads_recalculate_full (GstCollectPads * pads) { if (pads->priv->earliest_data) unref_data (pads->priv->earliest_data); gst_collect_pads_find_best_pad (pads, &pads->priv->earliest_data, &pads->priv->earliest_time); if (pads->priv->earliest_data) ref_data (pads->priv->earliest_data); return gst_collect_pads_recalculate_waiting (pads); } /* * Default collect callback triggered when #GstCollectPads gathered all data. * * Called with STREAM_LOCK. */ static GstFlowReturn gst_collect_pads_default_collected (GstCollectPads * pads, gpointer user_data) { GstCollectData *best = NULL; GstBuffer *buffer; GstFlowReturn ret = GST_FLOW_OK; GstCollectPadsBufferFunction func; gpointer buffer_user_data; g_return_val_if_fail (GST_IS_COLLECT_PADS (pads), GST_FLOW_ERROR); GST_OBJECT_LOCK (pads); func = pads->priv->buffer_func; buffer_user_data = pads->priv->buffer_user_data; GST_OBJECT_UNLOCK (pads); g_return_val_if_fail (func != NULL, GST_FLOW_NOT_SUPPORTED); /* Find the oldest pad at all cost */ if (gst_collect_pads_recalculate_full (pads)) { /* waiting was switched on, * so give another thread a chance to deliver a possibly * older buffer; don't charge on yet with the current oldest */ ret = GST_FLOW_OK; goto done; } best = pads->priv->earliest_data; /* No data collected means EOS. */ if (G_UNLIKELY (best == NULL)) { ret = func (pads, best, NULL, buffer_user_data); if (ret == GST_FLOW_OK) ret = GST_FLOW_EOS; goto done; } /* make sure that the pad we take a buffer from is waiting; * otherwise popping a buffer will seem not to have happened * and collectpads can get into a busy loop */ gst_collect_pads_set_waiting (pads, best, TRUE); /* Send buffer */ buffer = gst_collect_pads_pop (pads, best); ret = func (pads, best, buffer, buffer_user_data); /* maybe non-waiting was forced to waiting above due to * newsegment events coming too sparsely, * so re-check to restore state to avoid hanging/waiting */ gst_collect_pads_recalculate_full (pads); done: return ret; } /* * Default timestamp compare function. */ static gint gst_collect_pads_default_compare_func (GstCollectPads * pads, GstCollectData * data1, GstClockTime timestamp1, GstCollectData * data2, GstClockTime timestamp2, gpointer user_data) { GST_LOG_OBJECT (pads, "comparing %" GST_TIME_FORMAT " and %" GST_TIME_FORMAT, GST_TIME_ARGS (timestamp1), GST_TIME_ARGS (timestamp2)); /* non-valid timestamps go first as they are probably headers or so */ if (G_UNLIKELY (!GST_CLOCK_TIME_IS_VALID (timestamp1))) return GST_CLOCK_TIME_IS_VALID (timestamp2) ? -1 : 0; if (G_UNLIKELY (!GST_CLOCK_TIME_IS_VALID (timestamp2))) return 1; /* compare timestamp */ if (timestamp1 < timestamp2) return -1; if (timestamp1 > timestamp2) return 1; return 0; } /* called with STREAM_LOCK */ static void gst_collect_pads_handle_position_update (GstCollectPads * pads, GstCollectData * data, GstClockTime new_pos) { gint cmp_res; /* If oldest time is not known, or current pad got newsegment; * recalculate the state */ if (!pads->priv->earliest_data || pads->priv->earliest_data == data) { gst_collect_pads_recalculate_full (pads); goto exit; } /* Check if the waiting state of the pad should change. */ cmp_res = pads->priv->compare_func (pads, data, new_pos, pads->priv->earliest_data, pads->priv->earliest_time, pads->priv->compare_user_data); if (cmp_res > 0) /* Stop waiting */ gst_collect_pads_set_waiting (pads, data, FALSE); exit: return; } static GstClockTime gst_collect_pads_clip_time (GstCollectPads * pads, GstCollectData * data, GstClockTime time) { GstClockTime otime = time; GstBuffer *in, *out = NULL; if (pads->priv->clip_func) { in = gst_buffer_new (); GST_BUFFER_PTS (in) = time; GST_BUFFER_DTS (in) = time; pads->priv->clip_func (pads, data, in, &out, pads->priv->clip_user_data); if (out) { otime = GST_BUFFER_PTS (out); gst_buffer_unref (out); } else { /* FIXME should distinguish between ahead or after segment, * let's assume after segment and use some large time ... */ otime = G_MAXINT64 / 2; } } return otime; } /** * gst_collect_pads_event_default: * @pads: the collectpads to use * @data: collect data of corresponding pad * @event: event being processed * @discard: process but do not send event downstream * * Default GstCollectPads event handling that elements should always * chain up to to ensure proper operation. Element might however indicate * event should not be forwarded downstream. */ gboolean gst_collect_pads_event_default (GstCollectPads * pads, GstCollectData * data, GstEvent * event, gboolean discard) { gboolean res = TRUE; GstCollectPadsBufferFunction buffer_func; GstObject *parent; GstPad *pad; GST_OBJECT_LOCK (pads); buffer_func = pads->priv->buffer_func; GST_OBJECT_UNLOCK (pads); pad = data->pad; parent = GST_OBJECT_PARENT (pad); switch (GST_EVENT_TYPE (event)) { case GST_EVENT_FLUSH_START: { /* forward event to unblock check_collected */ GST_DEBUG_OBJECT (pad, "forwarding flush start"); res = gst_pad_event_default (pad, parent, event); event = NULL; /* now unblock the chain function. * no cond per pad, so they all unblock, * non-flushing block again */ GST_COLLECT_PADS_STREAM_LOCK (pads); GST_COLLECT_PADS_STATE_SET (data, GST_COLLECT_PADS_STATE_FLUSHING); gst_collect_pads_clear (pads, data); /* cater for possible default muxing functionality */ if (buffer_func) { /* restore to initial state */ gst_collect_pads_set_waiting (pads, data, TRUE); /* if the current pad is affected, reset state, recalculate later */ if (pads->priv->earliest_data == data) { unref_data (data); pads->priv->earliest_data = NULL; pads->priv->earliest_time = GST_CLOCK_TIME_NONE; } } GST_COLLECT_PADS_STREAM_UNLOCK (pads); goto eat; } case GST_EVENT_FLUSH_STOP: { /* flush the 1 buffer queue */ GST_COLLECT_PADS_STREAM_LOCK (pads); GST_COLLECT_PADS_STATE_UNSET (data, GST_COLLECT_PADS_STATE_FLUSHING); gst_collect_pads_clear (pads, data); /* we need new segment info after the flush */ gst_segment_init (&data->segment, GST_FORMAT_UNDEFINED); GST_COLLECT_PADS_STATE_UNSET (data, GST_COLLECT_PADS_STATE_NEW_SEGMENT); /* if the pad was EOS, remove the EOS flag and * decrement the number of eospads */ if (G_UNLIKELY (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_EOS))) { if (!GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) pads->priv->queuedpads++; pads->priv->eospads--; GST_COLLECT_PADS_STATE_UNSET (data, GST_COLLECT_PADS_STATE_EOS); } GST_COLLECT_PADS_STREAM_UNLOCK (pads); goto forward; } case GST_EVENT_EOS: { GST_COLLECT_PADS_STREAM_LOCK (pads); /* if the pad was not EOS, make it EOS and so we * have one more eospad */ if (G_LIKELY (!GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_EOS))) { GST_COLLECT_PADS_STATE_SET (data, GST_COLLECT_PADS_STATE_EOS); if (!GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) pads->priv->queuedpads--; pads->priv->eospads++; } /* check if we need collecting anything, we ignore the result. */ gst_collect_pads_check_collected (pads); GST_COLLECT_PADS_STREAM_UNLOCK (pads); goto eat; } case GST_EVENT_SEGMENT: { GstSegment seg; GST_COLLECT_PADS_STREAM_LOCK (pads); gst_event_copy_segment (event, &seg); GST_DEBUG_OBJECT (data->pad, "got segment %" GST_SEGMENT_FORMAT, &seg); /* default collection can not handle other segment formats than time */ if (buffer_func && seg.format != GST_FORMAT_TIME) { GST_WARNING_OBJECT (pads, "GstCollectPads default collecting " "can only handle time segments. Non time segment ignored."); goto newsegment_done; } /* need to update segment first */ data->segment = seg; GST_COLLECT_PADS_STATE_SET (data, GST_COLLECT_PADS_STATE_NEW_SEGMENT); /* now we can use for e.g. running time */ seg.position = gst_collect_pads_clip_time (pads, data, seg.start); /* update again */ data->segment = seg; /* default muxing functionality */ if (!buffer_func) goto newsegment_done; gst_collect_pads_handle_position_update (pads, data, seg.position); newsegment_done: GST_COLLECT_PADS_STREAM_UNLOCK (pads); /* we must not forward this event since multiple segments will be * accumulated and this is certainly not what we want. */ goto eat; } case GST_EVENT_GAP: { GstClockTime start, duration; GST_COLLECT_PADS_STREAM_LOCK (pads); gst_event_parse_gap (event, &start, &duration); if (GST_CLOCK_TIME_IS_VALID (duration)) start += duration; /* we do not expect another buffer until after gap, * so that is our position now */ data->segment.position = gst_collect_pads_clip_time (pads, data, start); gst_collect_pads_handle_position_update (pads, data, data->segment.position); GST_COLLECT_PADS_STREAM_UNLOCK (pads); goto eat; } case GST_EVENT_STREAM_START: /* drop stream start events, element must create its own start event, * we can't just forward the first random stream start event we get */ goto eat; case GST_EVENT_CAPS: goto eat; default: /* forward other events */ goto forward; } eat: if (event) gst_event_unref (event); return res; forward: if (discard) goto eat; else return gst_pad_event_default (pad, parent, event); } static gboolean gst_collect_pads_event_default_internal (GstCollectPads * pads, GstCollectData * data, GstEvent * event, gpointer user_data) { return gst_collect_pads_event_default (pads, data, event, FALSE); } static gboolean gst_collect_pads_event (GstPad * pad, GstObject * parent, GstEvent * event) { gboolean res = FALSE, need_unlock = FALSE; GstCollectData *data; GstCollectPads *pads; GstCollectPadsEventFunction event_func; gpointer event_user_data; /* some magic to get the managing collect_pads */ GST_OBJECT_LOCK (pad); data = (GstCollectData *) gst_pad_get_element_private (pad); if (G_UNLIKELY (data == NULL)) goto pad_removed; ref_data (data); GST_OBJECT_UNLOCK (pad); res = FALSE; pads = data->collect; GST_DEBUG_OBJECT (data->pad, "Got %s event on sink pad", GST_EVENT_TYPE_NAME (event)); GST_OBJECT_LOCK (pads); event_func = pads->priv->event_func; event_user_data = pads->priv->event_user_data; GST_OBJECT_UNLOCK (pads); if (GST_EVENT_IS_SERIALIZED (event)) { GST_COLLECT_PADS_STREAM_LOCK (pads); need_unlock = TRUE; } if (G_LIKELY (event_func)) { res = event_func (pads, data, event, event_user_data); } if (need_unlock) GST_COLLECT_PADS_STREAM_UNLOCK (pads); unref_data (data); return res; /* ERRORS */ pad_removed: { GST_DEBUG ("%s got removed from collectpads", GST_OBJECT_NAME (pad)); GST_OBJECT_UNLOCK (pad); return FALSE; } } /** * gst_collect_pads_query_default: * @pads: the collectpads to use * @data: collect data of corresponding pad * @query: query being processed * @discard: process but do not send event downstream * * Default GstCollectPads query handling that elements should always * chain up to to ensure proper operation. Element might however indicate * query should not be forwarded downstream. */ gboolean gst_collect_pads_query_default (GstCollectPads * pads, GstCollectData * data, GstQuery * query, gboolean discard) { gboolean res = TRUE; GstObject *parent; GstPad *pad; pad = data->pad; parent = GST_OBJECT_PARENT (pad); switch (GST_QUERY_TYPE (query)) { case GST_QUERY_SEEKING: { GstFormat format; /* don't pass it along as some (file)sink might claim it does * whereas with a collectpads in between that will not likely work */ gst_query_parse_seeking (query, &format, NULL, NULL, NULL); gst_query_set_seeking (query, format, FALSE, 0, -1); res = TRUE; discard = TRUE; break; } default: break; } if (!discard) return gst_pad_query_default (pad, parent, query); else return res; } static gboolean gst_collect_pads_query_default_internal (GstCollectPads * pads, GstCollectData * data, GstQuery * query, gpointer user_data) { return gst_collect_pads_query_default (pads, data, query, FALSE); } static gboolean gst_collect_pads_query (GstPad * pad, GstObject * parent, GstQuery * query) { gboolean res = FALSE, need_unlock = FALSE; GstCollectData *data; GstCollectPads *pads; GstCollectPadsQueryFunction query_func; gpointer query_user_data; GST_DEBUG_OBJECT (pad, "Got %s query on sink pad", GST_QUERY_TYPE_NAME (query)); /* some magic to get the managing collect_pads */ GST_OBJECT_LOCK (pad); data = (GstCollectData *) gst_pad_get_element_private (pad); if (G_UNLIKELY (data == NULL)) goto pad_removed; ref_data (data); GST_OBJECT_UNLOCK (pad); pads = data->collect; GST_OBJECT_LOCK (pads); query_func = pads->priv->query_func; query_user_data = pads->priv->query_user_data; GST_OBJECT_UNLOCK (pads); if (GST_QUERY_IS_SERIALIZED (query)) { GST_COLLECT_PADS_STREAM_LOCK (pads); need_unlock = TRUE; } if (G_LIKELY (query_func)) { res = query_func (pads, data, query, query_user_data); } if (need_unlock) GST_COLLECT_PADS_STREAM_UNLOCK (pads); unref_data (data); return res; /* ERRORS */ pad_removed: { GST_DEBUG ("%s got removed from collectpads", GST_OBJECT_NAME (pad)); GST_OBJECT_UNLOCK (pad); return FALSE; } } /* For each buffer we receive we check if our collected condition is reached * and if so we call the collected function. When this is done we check if * data has been unqueued. If data is still queued we wait holding the stream * lock to make sure no EOS event can happen while we are ready to be * collected */ static GstFlowReturn gst_collect_pads_chain (GstPad * pad, GstObject * parent, GstBuffer * buffer) { GstCollectData *data; GstCollectPads *pads; GstFlowReturn ret; GstBuffer **buffer_p; guint32 cookie; GST_DEBUG ("Got buffer for pad %s:%s", GST_DEBUG_PAD_NAME (pad)); /* some magic to get the managing collect_pads */ GST_OBJECT_LOCK (pad); data = (GstCollectData *) gst_pad_get_element_private (pad); if (G_UNLIKELY (data == NULL)) goto no_data; ref_data (data); GST_OBJECT_UNLOCK (pad); pads = data->collect; GST_COLLECT_PADS_STREAM_LOCK (pads); /* if not started, bail out */ if (G_UNLIKELY (!pads->priv->started)) goto not_started; /* check if this pad is flushing */ if (G_UNLIKELY (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_FLUSHING))) goto flushing; /* pad was EOS, we can refuse this data */ if (G_UNLIKELY (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_EOS))) goto eos; /* see if we need to clip */ if (pads->priv->clip_func) { GstBuffer *outbuf = NULL; ret = pads->priv->clip_func (pads, data, buffer, &outbuf, pads->priv->clip_user_data); buffer = outbuf; if (G_UNLIKELY (outbuf == NULL)) goto clipped; if (G_UNLIKELY (ret == GST_FLOW_EOS)) goto eos; else if (G_UNLIKELY (ret != GST_FLOW_OK)) goto error; } GST_DEBUG_OBJECT (pads, "Queuing buffer %p for pad %s:%s", buffer, GST_DEBUG_PAD_NAME (pad)); /* One more pad has data queued */ if (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_WAITING)) pads->priv->queuedpads++; buffer_p = &data->buffer; gst_buffer_replace (buffer_p, buffer); /* update segment last position if in TIME */ if (G_LIKELY (data->segment.format == GST_FORMAT_TIME)) { GstClockTime timestamp; timestamp = GST_BUFFER_DTS (buffer); if (!GST_CLOCK_TIME_IS_VALID (timestamp)) timestamp = GST_BUFFER_PTS (buffer); if (GST_CLOCK_TIME_IS_VALID (timestamp)) data->segment.position = timestamp; } /* While we have data queued on this pad try to collect stuff */ do { /* Check if our collected condition is matched and call the collected * function if it is */ ret = gst_collect_pads_check_collected (pads); /* when an error occurs, we want to report this back to the caller ASAP * without having to block if the buffer was not popped */ if (G_UNLIKELY (ret != GST_FLOW_OK)) goto error; /* data was consumed, we can exit and accept new data */ if (data->buffer == NULL) break; /* Having the _INIT here means we don't care about any broadcast up to here * (most of which occur with STREAM_LOCK held, so could not have happened * anyway). We do care about e.g. a remove initiated broadcast as of this * point. Putting it here also makes this thread ignores any evt it raised * itself (as is a usual WAIT semantic). */ GST_COLLECT_PADS_EVT_INIT (cookie); /* pad could be removed and re-added */ unref_data (data); GST_OBJECT_LOCK (pad); if (G_UNLIKELY ((data = gst_pad_get_element_private (pad)) == NULL)) goto pad_removed; ref_data (data); GST_OBJECT_UNLOCK (pad); GST_DEBUG_OBJECT (pads, "Pad %s:%s has a buffer queued, waiting", GST_DEBUG_PAD_NAME (pad)); /* wait to be collected, this must happen from another thread triggered * by the _chain function of another pad. We release the lock so we * can get stopped or flushed as well. We can however not get EOS * because we still hold the STREAM_LOCK. */ GST_COLLECT_PADS_STREAM_UNLOCK (pads); GST_COLLECT_PADS_EVT_WAIT (pads, cookie); GST_COLLECT_PADS_STREAM_LOCK (pads); GST_DEBUG_OBJECT (pads, "Pad %s:%s resuming", GST_DEBUG_PAD_NAME (pad)); /* after a signal, we could be stopped */ if (G_UNLIKELY (!pads->priv->started)) goto not_started; /* check if this pad is flushing */ if (G_UNLIKELY (GST_COLLECT_PADS_STATE_IS_SET (data, GST_COLLECT_PADS_STATE_FLUSHING))) goto flushing; } while (data->buffer != NULL); unlock_done: GST_COLLECT_PADS_STREAM_UNLOCK (pads); /* data is definitely NULL if pad_removed goto was run. */ if (data) unref_data (data); if (buffer) gst_buffer_unref (buffer); return ret; pad_removed: { GST_WARNING ("%s got removed from collectpads", GST_OBJECT_NAME (pad)); GST_OBJECT_UNLOCK (pad); ret = GST_FLOW_NOT_LINKED; goto unlock_done; } /* ERRORS */ no_data: { GST_DEBUG ("%s got removed from collectpads", GST_OBJECT_NAME (pad)); GST_OBJECT_UNLOCK (pad); gst_buffer_unref (buffer); return GST_FLOW_NOT_LINKED; } not_started: { GST_DEBUG ("not started"); gst_collect_pads_clear (pads, data); ret = GST_FLOW_FLUSHING; goto unlock_done; } flushing: { GST_DEBUG ("pad %s:%s is flushing", GST_DEBUG_PAD_NAME (pad)); gst_collect_pads_clear (pads, data); ret = GST_FLOW_FLUSHING; goto unlock_done; } eos: { /* we should not post an error for this, just inform upstream that * we don't expect anything anymore */ GST_DEBUG ("pad %s:%s is eos", GST_DEBUG_PAD_NAME (pad)); ret = GST_FLOW_EOS; goto unlock_done; } clipped: { GST_DEBUG ("clipped buffer on pad %s:%s", GST_DEBUG_PAD_NAME (pad)); ret = GST_FLOW_OK; goto unlock_done; } error: { /* we print the error, the element should post a reasonable error * message for fatal errors */ GST_DEBUG ("collect failed, reason %d (%s)", ret, gst_flow_get_name (ret)); gst_collect_pads_clear (pads, data); goto unlock_done; } }