Samsung LT v3.2 Release

========================

topic/asv_cpufreq	- ASV and CPUFREQ
topic/audio		- staging audio driver
topic/bl_reg		- adding regulator support in BL
topic/cma_v16		- CMA support
topic/core		- Common bug-fixes and compilation error fixes
topic/cpuidle		- Related to L2
topic/dt		- Enable in defconfig
topic/fb		- Framebuffer enablement patches
topic/g2d		- G2D enablement patches
topic/gadget		- USB gadget support patches (internal)
topic/hdmi		- HDMI enablement patches
topic/jpeg_cma		- JPEG support (internal)
topic/kgene		- Patches from Kukjin's for-next branch
			  DMA and restart patches are not taken
topic/led		- Ricardo's patches related to gpio-led driver
topic/mmc		- Sangwook's patches related to pm_caps
topic/ohci		- Config to enable ohci support
topic/s2ram		- S2RAM fixes
topic/thermal		- Amit's patches related TMU
topic/touch		- Touchscreen support (internal)
topic/wlan		- Sangwook's patches related to WLAN enablement

*Patches lined up for v3.3-rc1*

Boojin Kim (1):
      ARM: EXYNOS: Enable MDMA driver

Denis Kuzmenko (1):
      ARM: S3C2440: Add new LCD (W35i) support for Mini2440 board

Heiko Stuebner (4):
      ARM: SAMSUNG: cleanup of rtc register definitions
      rtc-s3c: make room for more variants in devicetree block
      rtc-s3c: add variants for S3C2443 and S3C2416
      ARM: S3C2443/S3C2416: add s3c_rtc_setname and rename rtc devices

Jingoo Han (4):
      ARM: SAMSUNG: Add a callback 'notify_after' for PWM backlight control
      ARM: EXYNOS: Add USB OHCI device
      ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
      USB: Add Samsung Exynos OHCI diver

Kamil Debski (3):
      ARM: SAMSUNG: add G2D to plat-s5p and mach-exynos
      ARM: EXYNOS: add G2D to mach-nuri
      ARM: EXYNOS: add G2D to mach-universal

Mark Brown (27):
      ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA
      ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms
      ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore
      ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore
      ARM: S3C64XX: Use software initiated powerdown for Cragganmore
      ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore
      ARM: S3C64XX: Improve logging of unknown Cragganmore module types
      ARM: S3C64XX: Run Tobermory interrupts in the default mode
      ARM: S3C64XX: Hook up platform data for Kilchomin module on Cragganmore
      ARM: S3C64XX: Hook up Littlemill audio card on Cragganmore
      ARM: S3C64XX: Power gate unused domains
      ARM: S3C64XX: Hook up VDDINT on Cragganmore
      ARM: S3C64XX: Add basic cpuidle driver
      ARM: S3C64XX: Gate some more clocks by default
      ARM: SAMSUNG: Guard against multiple inclusion of plat/dma.h
      ARM: SAMSUNG: dma-ops.h needs mach/dma.h
      ARM: S3C64XX: Remove unconditional power domain disables
      ARM: S3C64XX: Remove hsmmc1 from Cragganmore
      ARM: SAMSUNG: Declare struct platform_device in plat/s3c64xx-spi.h
      ARM: S3C64XX: Fix the memory mapped GPIOs on Cragganmore
      ARM: S3C64XX: Support GPIO LEDs on Cragganmore
      ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode
      ARM: S3C64XX: Fix interrupt configuration for PCA935x on Cragganmore
      ARM: S3C64XX: Fix build of Cragganmore after SPI changes
      ARM: S3C64XX: Enable power management for disk on Cragganmore
      ARM: S3C64XX: Enable power management for WiFi on Cragganmore
      serial: samsung: Fix build for non-Exynos4210 devices

MyungJoo Ham (3):
      ARM: EXYNOS: Add DMC1 and allow PPMU access for DMC
      ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
      ARM: EXYNOS: Add support EXYNOS4210-bus Devfreq driver on Nuri board

Padmavathi Venna (13):
      spi/s3c64xx: Use bus clocks created using clkdev
      ARM: S3C64XX: Add SPI clkdev support
      ARM: S5PC100: Add SPI clkdev support
      ARM: S5P64X0: Add SPI clkdev support
      ARM: S5PV210: Add SPI clkdev support
      ARM: SAMSUNG: Remove SPI bus clocks from platform data
      ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung
      ARM: S3C64XX: Modified files for SPI consolidation work
      ARM: S5PC100: Modified files for SPI consolidation work
      ARM: S5P64X0: Modified files for SPI consolidation work
      ARM: S5PV210: Modified files for SPI consolidation work
      ARM: S3C64XX: Modified according to SPI consolidation work
      ARM: EXYNOS: Modified files for SPI consolidation work

Rajeshwari Shinde (6):
      ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
      ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
      mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options
      ARM: S5P64X0: Add HSMMC setup for host Controller
      ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
      ARM: S5P64X0: Enable SDHCI support

Sachin Kamat (1):
      ARM: EXYNOS: Enable G2D on ORIGEN

Sangwook Lee (1):
      ARM: EXYNOS: Enable Bluetooth on ORIGEN

Thomas Abraham (26):
      ARM: SAMSUNG: Move timer irq numbers to end of linux irq space
      ARM: EXYNOS: Enable conversion of GIC dt irq specifier to linux virq
      gpio/samsung: Add device tree support for EXYNOS4
      serial: samsung: Keep a copy of the location of platform data in driver's private data
      ARM: S3C2440: move handling of fclk/n clock to platform code
      serial: samsung: switch to clkdev based clock lookup
      ARM: SAMSUNG: remove struct 's3c24xx_uart_clksrc' and all uses of it
      serial: samsung: remove all uses of get_clksrc and set_clksrc
      ARM: SAMSUNG: register uart clocks to clock lookup list
      serial: samsung: merge all SoC specific port reset functions
      serial: samsung: merge probe() function from all SoC specific extensions
      serial: samsung: add device tree support
      DMA: PL330: move filter function into driver
      DMA: PL330: Infer transfer direction from transfer request instead of platform data
      ARM: EXYNOS: Modify platform data for pl330 driver
      DMA: PL330: Add device tree support
      ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
      ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build
      ARM: EXYNOS: Add a alias for pdma clocks
      ARM: S5P64x0: Modify platform data for pl330 driver
      ARM: S5PC100: Modify platform data for pl330 driver
      ARM: S5PV210: Modify platform data for pl330 driver
      input: samsung-keypad: Add device tree support
      rtc: rtc-s3c: Add device tree support
      ARM: EXYNOS: Add Exynos4 device tree enabled board file
      ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN

Tushar Behera (3):
      ARM: EXYNOS: Invert VCLK polarity for framebuffer on ORIGEN
      ARM: EXYNOS: Add USB OHCI support to ORIGEN board
      ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1

*Patches under review or internal patches*/
Amit Daniel Kachhap (10):
      thermal: Add a new trip type to use cooling device instance number
      thermal: Add generic cpu cooling implementation
      thermal: exynos: Add thermal interface support for linux thermal layer
      thermal: exynos4: Register the tmu sensor with the thermal interface layer
      ARM: exynos4: Add thermal sensor driver platform device support
      ARM: exynos: Add support AFTR mode on EXYNOS4210
      ARM: s5p: add L2 early resume code
      ARM: exynos: save L2 settings during bootup
      ARM: exynos: remove useless code to save/restore L2
      ARM: exynos: Enable l2 configuration through device tree

Angus Ainslie (1):
      ARM: EXYNOS: Enable HSMMC3 for WLAN on Origen board

Bhuvana Kakunoori (2):
      usb: gadget: s3c_udc_otg: Add driver for Samsung OTG Block
      ARM: S5P: Add platform device definition for USB Gadget Device

Boojin Kim (1):
      DMA: PL330: Fix build warning

Fahad Kunnathadi (1):
      Input: unidisplay_ts: Add Pixcir touchscreen driver

Giridhar Maruthy (7):
      ASoC: codecs: ALC5625: Add Realtek ALC5625 driver
      ASoC: codecs: ALC5625: Adding I2S platform support on Origen
      ARM: EXYNOS: Add audio subsystem clocks
      ARM: EXYNOS: Add I2S and ALC5625 support for Origen
      ARM: EXYNOS4: Enable LDOs for ALC5625 on Origen
      ARM: EXYNOS4: Reset I2S in resume if not active
      ARM: EXYNOS4: Save audio register for suspend-resume

Inderpal Singh (9):
      ARM: SAMSUNG: Fix i2c0 device id to match with devname
      ARM: EXYNOS: Enable RTC as wake up source
      ARM: EXYNOS: Fix for suspend/resume hang
      ARM: EXYNOS: Fix reboot hang after suspend/resume
      ARM: EXYNOS4: Add clock for Exynos4210 asv feature
      EXYNOS4210: Remove code about bus on cpufreq
      EXYNOS4210: cpufreq code is changed for stable working
      ARM: EXYNOS4210: Add support ASV feature
      CONFIG: ORIGEN: Enable CPU Freq

Jongpill Lee (3):
      ARM: EXYNOS4: Add ASV feature for Exynos4 series
      ARM: EXYNOS4: Support ASV for Exynos4210
      EXYNOS4210: Update frequency table for cpu divider

Kamil Debski (3):
      v4l: add G2D driver for s5p device family
      s5p-g2d: fixed a bug in controls setting function
      s5p-g2d: remove two unused variables from the G2D driver

Marek Szyprowski (7):
      drivers: add Contiguous Memory Allocator
      X86: integrate CMA with DMA-mapping subsystem
      ARM: integrate CMA with DMA-mapping subsystem
      ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device
      mm: cma: hack/workaround for some allocation issues
      media: vb2: add frame buffer emulator for video output devices
      media: s5p-hdmi: add support for frame buffer emulator

Michal Nazarewicz (7):
      mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()
      mm: compaction: introduce isolate_{free,migrate}pages_range().
      mm: mmzone: introduce zone_pfn_same_memmap()
      mm: compaction: export some of the functions
      mm: page_alloc: introduce alloc_contig_range()
      mm: mmzone: MIGRATE_CMA migration type added
      mm: page_isolation: MIGRATE_CMA isolation functions added

Pankaj (7):
      CONFIG: ORIGEN: Enable USB OHCI host support
      usb: gadget: s3c_udc_otg: Keep enabling USB device phy powered on
      usb: gadget: s3c_udc_otg: Handle USB connection event in ISR
      usb: gadget: s3c_udc_otg: Update as per new architecture
      usb: gadget: u_ether: Fix added for USB ethernet gadget
      ARM: EXYNOS4: Add support of UDC for origen board
      CONFIG: ORIGEN: Enable USB gadget support for origen

Ricardo Salveti de Araujo (1):
      ARM: EXYNOS: Add leds status1 and status2 on Origen board

Sachin Kamat (11):
      ARM: EXYNOS4: Add touchscreen I2C device information on Origen board
      CONFIG: ORIGEN: Enable touchscreen driver
      ARM: S5PV210: Enable FIMC on SMDKC110
      ARM: S5PV210: Enable FIMC on SMDKV210
      ARM: S5PV210: Add missing FIMC media device to Aquila
      ARM: EXYNOS: Add missing FIMC media device to SMDKV310
      ARM: EXYNOS: Add missing FIMC media device to Origen
      ARM: S5PV210: Enable MFC on SMDKV210
      ARM: S5PV210: Enable MFC on SMDKC110
      ARM: EXYNOS: Enable G2D on SMDKV310
      ARM: S5PV210: Add G2D to mach-s5pv210

Sangwook Lee (10):
      ARM: SAMSUNG: Add pm_caps into platform data
      mmc: sdhci-s3c: Add pm_caps into SD/MMC host
      ath6kl: Add Platform data API into Qualcomm ath6kl WLAN
      ath6kl: Fix OTP execution address for Origen WLAN
      ath6kl: Add enablements for Samsung Origen WLAN
      ath6kl: Add config entry for polling support
      ath6kl: Fix compile bugs with 'make O=' option
      mmc: sdhci: remove MMC_CAP_SDIO_IRQ from mmc for WLAN
      CONFIG: ORIGEN: Update WLAN configuration options
      sdio: optimization for sdio_irq_thread

Thomas Abraham (3):
      input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option
      backlight: add regulator support for platform_lcd driver
      arm: exynos: allow platform-lcd driver to control lcd regulator source on origen

Tomasz Stanislawski (1):
      drivers: i2c: s3c2410: add support for HDMIPHY dedicated controller

Tushar Behera (26):
      CONFIG: ORIGEN: Add initial config file for ORIGEN board
      DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove
      DMA: PL330: Fix compile time warning
      gpu: drm: exynos: Include module.h to remove compilation errors
      media: s5p-hdmi: Include linux/module.h for fixing compilation error
      mmc: block: Fix compile time warning for uninitalized variables
      i2c-s3c2410: Don't return error if no gpio entry in Device Tree blob
      CONFIG: ORIGEN: Enable DT
      CONFIG: ORIGEN: Enable thermal management unit
      CONFIG: ORIGEN: Enable CPU Idle
      CONFIG: ORIGEN: Enable gpio-led driver
      ARM: EXYNOS: Increase DMA pool allocator size for framebuffer
      ARM: EXYNOS: Add clkdev lookup entry for lcd clock
      usb: gadget: s3c_udc_otg: Changed hooks for probe and unregister functions
      usb: gadget: s3c_udc_otg: Change as per ep_matches API modification
      ARM: EXYNOS: Add support for USB Gadget Device
      ARM: EXYNOS: Further clock consolidation code
      CONFIG: ORIGEN: Enable staging support for ALC5625(I2S-Audio)
      ARM: EXYNOS: Increase memory for full HD display in HDMI
      CONFIG: ORIGEN: Enable HDMI
      CONFIG: ORIGEN: Enable MFC
      CONFIG: ORIGEN: Enable G2D
      media: samsung/jpeg: Add JPEG driver
      ARM: EXYNOS4: Add platform specific code for JPEG
      ARM: EXYNOS4: Add support for JPEG driver on Origen board
      CONFIG: ORIGEN: Enable JPEG driver