diff options
Diffstat (limited to 'HisiPkg/Include/Library/config.h')
| -rw-r--r-- | HisiPkg/Include/Library/config.h | 436 |
1 files changed, 436 insertions, 0 deletions
diff --git a/HisiPkg/Include/Library/config.h b/HisiPkg/Include/Library/config.h new file mode 100644 index 000000000..3911e236c --- /dev/null +++ b/HisiPkg/Include/Library/config.h @@ -0,0 +1,436 @@ +/* config.h - Mistral OMAP35xx configuration header */
+
+/*
+ * Copyright (c) 2008-2009 Wind River Systems, Inc.
+ * Copyright (c) Huawei Technologies Co., Ltd. 2013. All rights reserved.
+ *
+ * The right to copy, distribute, modify or otherwise make use
+ * of this software may be licensed only pursuant to the terms
+ * of an applicable Wind River license agreement.
+ */
+
+/*
+modification history
+--------------------
+01f,25mar09,m_h add support for copyback cache & RTP
+01e,19mar09,m_h Cache is writethrough not copyback
+01d,19feb09,m_h cleanup
+01c,22jan09,m_h OneNand Flash Support
+01b,24nov08,m_h Configure to add networking
+01a,16jun08,m_h created.
+*/
+
+/*
+DESCRIPTION
+This module contains the configuration parameters for the Mistral OMAP35xx BSP.
+*/
+
+#ifndef __INCconfigh
+#define __INCconfigh
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* BSP version/revision identification, before configAll.h */
+
+#define BSP_VER_1_1 1 /* 1.2 is backwards compatible with 1.1 */
+#define BSP_VER_1_2 1
+#define BSP_VERSION "2.0"
+#define BSP_REV "/0" /* 0 for first revision */
+
+//#include <configAll.h>
+/*
+ * vxbus support
+ */
+#ifdef _BSP_BUILD_VXWORKS
+#define INCLUDE_VXBUS
+#else
+#undef INCLUDE_VXBUS
+#endif
+#ifdef INCLUDE_VXBUS
+#define INCLUDE_HWMEM_ALLOC
+#define INCLUDE_VXB_CMDLINE
+
+#define HWMEM_POOL_SIZE 50000
+
+#endif /* INCLUDE_VXBUS */
+
+/*
+ * SYS_MODEL define
+ *
+ */
+
+#define SYS_MODEL "HISILICON - CortexA9 (ARM)"
+
+
+/* Support network devices */
+#define INCLUDE_NET_DAEMON
+#undef INCLUDE_APPL_LOG_UTIL
+#undef INCLUDE_END2_LINKBUFPOOL
+
+#define DEFAULT_BOOT_LINE \
+ "HiFE(0,0)OMC:vxWorks.bin h=192.168.0.200 e=192.168.0.100 u=aa pw=123"
+
+
+
+#ifndef HDF_MASTER_CORE_FLAG
+#define HDF_MASTER_CORE_FLAG 0
+#define HDF_SLAVE_CORE_FLAG 1
+#define HDF_BOOTROM_COMPILE_FLAG 0
+#define HDF_VXWORKS_COMPILE_FLAG 1
+#endif
+
+
+
+
+
+/* Memory configuration */
+#undef LOCAL_MEM_AUTOSIZE /* run-time memory sizing */
+
+#ifndef _BSP_BUILD_VXWORKS
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#define USER_RESERVED_MEM HDF_GetMemPoolResSizeConfig(HDF_SLAVE_CORE_FLAG,HDF_BOOTROM_COMPILE_FLAG)
+#else
+#define USER_RESERVED_MEM HDF_GetMemPoolResSizeConfig(HDF_MASTER_CORE_FLAG,HDF_BOOTROM_COMPILE_FLAG)
+#endif
+#else
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#define USER_RESERVED_MEM HDF_GetMemPoolResSizeConfig(HDF_SLAVE_CORE_FLAG,HDF_VXWORKS_COMPILE_FLAG)
+#else
+#define USER_RESERVED_MEM HDF_GetMemPoolResSizeConfig(HDF_MASTER_CORE_FLAG,HDF_VXWORKS_COMPILE_FLAG)
+#endif
+#endif
+
+#define LOCAL_MEM_LOCAL_ADRS (0x0)
+
+
+
+#ifndef _BSP_BUILD_VXWORKS
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#define LOCAL_MEM_SIZE HDF_GetMemPoolPhyMemTopConfig(HDF_SLAVE_CORE_FLAG,HDF_BOOTROM_COMPILE_FLAG)
+#else
+#define LOCAL_MEM_SIZE HDF_GetMemPoolPhyMemTopConfig(HDF_MASTER_CORE_FLAG,HDF_BOOTROM_COMPILE_FLAG)
+#endif
+#else
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#define LOCAL_MEM_SIZE HDF_GetMemPoolPhyMemTopConfig(HDF_SLAVE_CORE_FLAG,HDF_VXWORKS_COMPILE_FLAG)
+#else
+#define LOCAL_MEM_SIZE HDF_GetMemPoolPhyMemTopConfig(HDF_MASTER_CORE_FLAG,HDF_VXWORKS_COMPILE_FLAG)
+#endif
+
+#endif
+#define LOCAL_MEM_END_ADRS (LOCAL_MEM_LOCAL_ADRS + LOCAL_MEM_SIZE)
+
+
+/*
+ * Boot ROM is an image written into Flash. Part of the Flash can be
+ * reserved for boot parameters etc. (see the Flash section below).
+ *
+ * The following parameters are defined here and in the Makefile.
+ * They must be kept synchronized; effectively config.h depends on Makefile.
+ * Any changes made here must be made in the Makefile and vice versa.
+ *
+ * ROM_BASE_ADRS is the base of the Flash ROM/EPROM.
+ * ROM_TEXT_ADRS is the entry point of the VxWorks image
+ * ROM_SIZE is the size of the part of the Flash ROM/EPROM allocated to
+ * the VxWorks image (block size - size of headers)
+ *
+ * Two other constants are used:
+ * ROM_COPY_SIZE is the size of the part of the ROM to be copied into RAM
+ * (e.g. in uncompressed boot ROM)
+ * ROM_SIZE_TOTAL is the size of the entire Flash ROM (used in sysPhysMemDesc)
+ *
+ * The values are given as literals here to make it easier to ensure
+ * that they are the same as those in the Makefile.
+ */
+
+#undef RAM_LOW_ADRS
+#undef RAM_HIGH_ADRS
+
+#define IMAGE_LOW_ADRS 0x00a00000
+
+/* VxWorks entry link address */
+#define VXWORKS_ENTRY IMAGE_LOW_ADRS
+
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#define RAM_LOW_ADRS 0x00200000 /* VxWorks image entry point */
+#define RAM_HIGH_ADRS 0x03000000 /* RAM address for ROM boot */
+
+#else
+
+#ifndef _BSP_BUILD_VXWORKS
+#define ROM_BASE_ADRS (HDFINF_GetTextBase())
+#define ROM_TEXT_ADRS (HDFINF_GetTextBase())
+#define RAM_LOW_ADRS 0x05000000 /* VxWorks image entry point */
+#define RAM_HIGH_ADRS 0x06000000 /* RAM address for ROM boot */
+#else
+#define ROM_BASE_ADRS 0x40200000 /* base of Flash/EPROM */
+#define ROM_TEXT_ADRS 0x40200000 /* code start addr in ROM */
+#define RAM_LOW_ADRS IMAGE_LOW_ADRS /* VxWorks image entry point */
+#define RAM_HIGH_ADRS 0x05000000 /* RAM address for ROM boot */
+#endif
+
+#endif
+
+#undef ROM_SIZE
+#define ROM_SIZE 0x00200000 /* size of ROM holding VxWorks*/
+
+
+/*
+ * Flash/NVRAM memory configuration
+ *
+ * A block of the Flash memory (FLASH_SIZE bytes at FLASH_ADRS) is
+ * reserved for non-volatile storage of data.
+ *
+ */
+
+#undef INCLUDE_FLASH
+
+/* Serial port configuration */
+
+#define N_SIO_CHANNELS 3
+
+#undef NUM_TTY
+#define NUM_TTY N_SIO_CHANNELS
+
+#define DEFAULT_BAUD (HDF_GetUartBaudRate())
+
+/* Console baud rate reconfiguration. */
+#undef CONSOLE_BAUD_RATE
+#define CONSOLE_BAUD_RATE DEFAULT_BAUD /* Reconfigure default baud rate */
+
+/*
+ * Define SERIAL_DEBUG to enable debugging
+ * via the serial ports
+ */
+
+#undef SERIAL_DEBUG
+#undef INCLUDE_BOOT_WDB
+
+#undef INCLUDE_WDB
+
+
+
+#if defined(INCLUDE_WDB) || defined (INCLUDE_BOOT_WDB)
+# undef WDB_COMM_TYPE
+# undef WDB_TTY_BAUD
+# undef WDB_TTY_CHANNEL
+# undef WDB_TTY_DEV_NAME
+# ifdef SERIAL_DEBUG
+# define WDB_NO_BAUD_AUTO_CONFIG
+# define WDB_COMM_TYPE WDB_COMM_SERIAL /* WDB in Serial mode */
+# define WDB_TTY_BAUD 38400 /* Baud rate for WDB Connctn */
+# define WDB_TTY_CHANNEL 1 /* COM PORT #2 */
+# define WDB_TTY_DEV_NAME "/tyCo/1" /* deflt TYCODRV_5_2 dev name */
+# else /* SERIAL_DEBUG */
+# define WDB_COMM_TYPE WDB_COMM_END
+# define WDB_TTY_BAUD DEFAULT_BAUD /* Baud rate for WDB Connctn */
+# define WDB_TTY_CHANNEL 0 /* COM PORT #1 */
+# define WDB_TTY_DEV_NAME "/tyCo/0" /* deflt TYCODRV_5_2 dev name */
+# endif /* SERIAL_DEBUG */
+#endif /* INCLUDE_WDB || INCLUDE_BOOT_WDB */
+
+
+/*
+ * We use the generic architecture libraries, with caches/MMUs present. A
+ * call to sysHwInit0() is needed from within usrInit before
+ * cacheLibInit() is called.
+ */
+
+/*
+ * Cache/MMU configuration
+ *
+ * Note that when MMU is enabled, cache modes are controlled by
+ * the MMU table entries in sysPhysMemDesc[], not the cache mode
+ * macros defined here.
+ */
+#define SYS_CACHE_UNCACHED_ADRS 0xffffffff/*OMAP35XX_L4_MPU_INTC*/
+
+# undef USER_I_CACHE_MODE
+# define USER_I_CACHE_MODE CACHE_COPYBACK
+
+# undef USER_D_CACHE_MODE
+# define USER_D_CACHE_MODE CACHE_COPYBACK
+
+
+/* Include MMU BASIC and CACHE support for command line and project builds */
+
+# define INCLUDE_MMU_BASIC
+# define INCLUDE_BOOT_MMU_BASIC
+# define INCLUDE_CACHE_SUPPORT
+
+#if defined(INCLUDE_MMU_BASIC) || defined(INCLUDE_MMU_FULL)
+# define INCLUDE_MMU
+#endif /* INCLUDE_MMU_BASIC || INCLUDE_MMU_FULL */
+
+/* Include MMU BASIC and CACHE support for command line and project builds */
+
+# define INCLUDE_MMU_BASIC
+# define INCLUDE_BOOT_MMU_BASIC
+# define INCLUDE_CACHE_SUPPORT
+
+#if defined(INCLUDE_MMU_BASIC) || defined(INCLUDE_MMU_FULL)
+# define INCLUDE_MMU
+#endif /* INCLUDE_MMU_BASIC || INCLUDE_MMU_FULL */
+
+#ifndef MEM_MMU_OFFSET
+#define MEM_MMU_OFFSET 0x00
+#endif
+
+/*
+ * Network driver configuration.
+ *
+ * De-select unused (default) network drivers selected in configAll.h.
+ */
+
+#undef INCLUDE_ENP /* include CMC Ethernet interface*/
+#undef INCLUDE_EX /* include Excelan Ethernet interface */
+#undef INCLUDE_SM_NET /* include backplane net interface */
+#undef INCLUDE_SM_SEQ_ADDR /* shared memory network auto address setup */
+
+#define INCLUDE_IPCOM_USE_AUTH_RADIUS
+
+
+/* Enhanced Network Driver (END) Support */
+
+#define INCLUDE_END
+
+#ifdef INCLUDE_END
+# ifndef SERIAL_DEBUG
+# define WBD_AGENT_END
+# else
+# undef WBD_AGENT_END
+# endif /* SERIAL_DEBUG */
+
+#endif /* INCLUDE_END */
+
+#ifdef _BSP_BUILD_VXWORKS
+#ifndef _CONTROL_SLAVE_CORE_IMG
+#if 1
+#define INCLUDE_USB
+#define INCLUDE_USB_INIT
+
+/*ehci*/
+#define INCLUDE_EHCI
+#define INCLUDE_EHCI_INIT
+#define INCLUDE_EHCI_BUS
+
+/*ohci*/
+#define INCLUDE_OHCI
+#define INCLUDE_OHCI_INIT
+#define INCLUDE_OHCI_BUS
+
+/*MASS STORGY device*/
+#define INCLUDE_USB_MS_BULKONLY
+#define INCLUDE_USB_MS_BULKONLY_INIT
+#define INCLUDE_USB_MS_CBI
+#define INCLUDE_USB_MS_CBI_INIT
+#define INCLUDE_NOR_FILESYS
+#endif
+#endif
+#endif
+
+#define INCLUDE_BSP_WATCHDOG
+
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#undef _INCLUDE_FILESYS
+#else
+#define _INCLUDE_FILESYS
+#endif
+
+#undef INCLUDE_TFFS
+
+#ifdef _CONTROL_SLAVE_CORE_IMG
+#undef INCLUDE_DOSFS
+#else
+/*define for FS*/
+#define INCLUDE_DOSFS
+#endif
+
+#define INCLUDE_XBD_RAMDRV /*ramDisk*/
+
+#ifdef INCLUDE_DOSFS
+#define INCLUDE_ERF
+#define INCLUDE_DEVICE_MANAGER
+#define INCLUDE_FS_EVENT_UTIL
+#define INCLUDE_FS_MONITOR
+#define INCLUDE_XBD
+#define INCLUDE_XBD_BLK_DEV
+#define INCLUDE_XBD_TRANS
+#define INCLUDE_DOSFS_DIR_FIXED
+#define INCLUDE_DOSFS_DIR_VFAT
+#define INCLUDE_DOSFS_FAT
+#define INCLUDE_DOSFS_FMT
+#define INCLUDE_DOSFS_CHKDSK
+#define INCLUDE_DOSFS_MAIN
+#endif /* INCLUDE_DOSFS*/
+
+/* I2C not supported */
+#undef INCLUDE_I2C
+
+/* touch screen not supported */
+#undef INCLUDE_TOUCHSCREEN
+
+/*
+ * Interrupt mode. Preemptive interrupts are not supported by the interrupt
+ * driver so INT_MODE must be set to INT_NON_PREEMPT_MODEL.
+ */
+
+#define INT_MODE INT_NON_PREEMPT_MODEL
+
+/*
+ * miscellaneous definitions
+ * Note: ISR_STACK_SIZE is defined here rather than in ../all/configAll.h
+ * (as is more usual) because the stack size depends on the interrupt
+ * structure of the BSP.
+ */
+
+#define ISR_STACK_SIZE 0x2000 /* size of ISR stack, in bytes */
+
+/* Optional timestamp support */
+
+#undef INCLUDE_TIMESTAMP /* define to include timestamp driver */
+#define INCLUDE_TIMESTAMP
+
+#ifndef INCLUDE_LOADER
+#define INCLUDE_LOADER
+#endif
+#ifndef INCLUDE_LOADER_HOOKS
+#define INCLUDE_LOADER_HOOKS
+#endif
+#ifndef INCLUDE_PTYDRV
+#define INCLUDE_PTYDRV /* pseudo terminal driver */
+#endif
+/*script*/
+#ifndef INCLUDE_STARTUP_SCRIPT
+#define INCLUDE_STARTUP_SCRIPT
+#endif
+
+
+#define INCLUDE_SHELL_INTERP_C /* C interpreter */
+#define INCLUDE_SHELL_INTERP_CMD /* shell command interpreter */
+
+#undef SHELL_COMPATIBLE
+#define SHELL_COMPATIBLE TRUE
+
+#ifndef BSP_BUILD_BASIC_BTRM
+#define INCLUDE_RAWFS
+#define INCLUDE_XBD_RAMDRV
+#endif
+#ifndef _CONTROL_SLAVE_CORE_IMG
+#ifdef _BSP_BUILD_VXWORKS
+#define INCLUDE_SECURITY
+#endif
+#endif
+#ifdef INCLUDE_SECURITY
+#define LOGIN_USER_NAME "target"
+#endif
+
+#include "BrdCommon.h"
+//#include "configExtend.h"
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __INCconfigh */
|