diff options
Diffstat (limited to 'bin/checkintest.sh')
| -rw-r--r-- | bin/checkintest.sh | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/bin/checkintest.sh b/bin/checkintest.sh deleted file mode 100644 index c4a9e96c..00000000 --- a/bin/checkintest.sh +++ /dev/null @@ -1,266 +0,0 @@ -#!/bin/bash -# -# Copyright (c) 2010, 2013, Oracle and/or its affiliates. All rights reserved. -# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. -# -# This code is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 only, as -# published by the Free Software Foundation. -# -# This code is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# version 2 for more details (a copy is included in the LICENSE file that -# accompanied this code). -# -# You should have received a copy of the GNU General Public License version -# 2 along with this work; if not, write to the Free Software Foundation, -# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. -# -# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA -# or visit www.oracle.com if you need additional information or have any -# questions. -# - -#best pass rate at test 262 known -TEST262_PASS_AT_LEAST=435 - -RUN_TEST="true" -RUN_TEST262="true" -RUN_NODE="true" -KEEP_OUTPUT="true" -CLEAN_AND_BUILD_NASHORN="true" - -#the stable node version to sync against -NODE_LAST_STABLE=v0.6.18 - -#parse args -for arg in $* -do - if [ $arg = "--no-test" ]; then - RUN_TEST="false" - echo "**** WARNING - you have disabled 'ant test', which is a minimum checkin requirement..." - elif [ $arg = "--no-262" ]; then - RUN_TEST262="false" - elif [ $arg = "--no-node" ]; then - RUN_NODE="false" - elif [ $arg = "--no-build" ]; then - CLEAN_AND_BUILD_NASHORN="false" - elif [ $arg = "--no-logs" ]; then - KEEP_OUTPUT="false" - fi -done - -function lastpart() { - arr=$(echo $1 | tr "/" "\n") - for x in $arr - do - _last=$x - done - echo $_last -} - -function check_installed() { - which $1 >/dev/null - if [ $? -ne 0 ]; then - echo "Error $1 not installed: $?" - exit 2 - fi -} - -check_installed hg -check_installed git -check_installed mv -check_installed git - -PWD=$(pwd); - -while [ -z $NASHORN_ROOT ] -do - if [ -e $PWD/.hg ]; then - NASHORN_ROOT=${PWD} - break - fi - PWD=$(dirname ${PWD}) -done - -echo "Nashorn root detected at ${NASHORN_ROOT}" - -COMMON_ROOT=$(dirname $NASHORN_ROOT) -echo "Common root is ${COMMON_ROOT}" - -echo "Running checkintest..." - -ABSOLUTE_NASHORN_HOME=$COMMON_ROOT/$(lastpart $NASHORN_ROOT) - -if [ $CLEAN_AND_BUILD_NASHORN != "false" ]; then - echo "Cleaning and building nashorn at $ABSOLUTE_NASHORN_HOME/nashorn..." - $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant clean >/dev/null 2>/dev/null) - $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant jar >/dev/null 2>/dev/null) - echo "Done." -fi - -function failure_check() { - while read line - do - LINE=$(echo $line | grep "Tests run") - if [ "${LINE}" != "" ]; then - RESULT=$(echo $line | grep "Failures: 0" | grep "Errors: 0") - if [ "${RESULT}" == "" ]; then - TESTNAME=$2 - echo "There were errors in ${TESTNAME} : ${LINE}" - exit 1 - fi - fi - done < $1 -} - -function test() { - TEST_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) - echo "Running 'ant test' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..." - $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test >$TEST_OUTPUT) - echo "Done." - - failure_check $TEST_OUTPUT - - echo "**** SUCCESS: 'ant test' successful" - - if [ $KEEP_OUTPUT == "true" ]; then - cp $TEST_OUTPUT ./checkintest.test.log - rm -fr $TEST_OUTPUT - fi -} - -if [ $RUN_TEST != "false" ]; then - test; -fi - -function test262() { - - echo "Running 'ant test262parallel' on nashorn from ${ABSOLUTE_NASHORN_HOME}/nashorn..." - TEST262_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) - - echo "Looking for ${ABSOLUTE_NASHORN_HOME}/test/test262..." - - if [ ! -e $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 ]; then - echo "test262 is missing... looking in $COMMON_ROOT..." - if [ ! -e $COMMON_ROOT/test262 ]; then - echo "... not there either... cloning from repo..." - hg clone http://hg.ecmascript.org/tests/test262 $COMMON_ROOT/test262 >/dev/null 2>/dev/null - echo "Done." - fi - echo "Adding soft link ${COMMON_ROOT}/test262 -> ${ABSOLUTE_NASHORN_HOME}/test/test262..." - ln -s $COMMON_ROOT/test262 $ABSOLUTE_NASHORN_HOME/nashorn/test/test262 - echo "Done." - fi - - echo "Ensuring test262 is up to date..." - $(cd $ABSOLUTE_NASHORN_HOME/nashorn/test/test262; hg pull -u >/dev/null 2>/dev/null) - echo "Done." - - echo "Running test262..." - $(cd $ABSOLUTE_NASHORN_HOME/nashorn; ant test262parallel > $TEST262_OUTPUT) - - FAILED=$(cat $TEST262_OUTPUT|grep "Tests run:"| cut -d ' ' -f 15 |tr -cd '"[[:digit:]]') - if [ $FAILED -gt $TEST262_PASS_AT_LEAST ]; then - echo "FAILURE: There are ${FAILED} failures in test262 and can be no more than ${TEST262_PASS_AT_LEAST}" - cp $TEST262_OUTPUT ./checkintest.test262.log - echo "See ./checkintest.test262.log" - echo "Terminating due to error" - exit 1 - elif [ $FAILED -lt $TEST262_PASS_AT_LEAST ]; then - echo "There seem to have been fixes to 262. ${FAILED} < ${TEST262_PASS_AT_LEAST}. Please update limit in bin/checkintest.sh" - fi - - echo "**** SUCCESS: Test262 passed with no more than ${TEST262_PASS_AT_LEAST} failures." - - if [ $KEEP_OUTPUT == "true" ]; then - cp $TEST262_OUTPUT ./checkintest.test262.log - rm -fr $TEST262_OUTPUT - fi -} - -if [ $RUN_TEST262 != "false" ]; then - test262; -fi; - -function testnode() { - TESTNODEJAR_OUTPUT=$ABSOLUTE_NASHORN_HOME/$(mktemp tmp.XXXXX) - - echo "Running node tests..." -#replace node jar properties nashorn with this nashorn - - NODEJAR_PROPERTIES=~/nodejar.properties - - NODE_HOME=$(cat $NODEJAR_PROPERTIES | grep ^node.home | cut -f2 -d=) - NASHORN_HOME=$(cat $NODEJAR_PROPERTIES | grep ^nashorn.home | cut -f2 -d=) - - ABSOLUTE_NODE_HOME=$COMMON_ROOT/$(lastpart $NODE_HOME) - - echo "Writing nodejar.properties..." - - cat > $NODEJAR_PROPERTIES << EOF -node.home=../node -nashorn.home=../$(lastpart $NASHORN_ROOT) -EOF - echo "Done." - echo "Checking node home ${ABSOLUTE_NODE_HOME}..." - - if [ ! -e $ABSOLUTE_NODE_HOME ]; then - echo "Node base dir not found. Cloning node..." - $(cd $COMMON_ROOT; git clone https://github.com/joyent/node.git $(lastpart $NODE_HOME) >/dev/null 2>/dev/null) - echo "Done." - echo "Updating to last stable version ${NODE_LAST_STABLE}..." - $(cd $ABSOLUTE_NODE_HOME; git checkout $NODE_LAST_STABLE >/dev/null 2>/dev/null) - echo "Done." - echo "Running configure..." - $(cd $ABSOLUTE_NODE_HOME; ./configure >/dev/null 2>/dev/null) - echo "Done." - fi - - echo "Ensuring node is built..." -#make sure node is built - $(cd $ABSOLUTE_NODE_HOME; make >/dev/null 2>/dev/null) - echo "Done." - - NODEJAR_HOME=$COMMON_ROOT/nodejar - - if [ ! -e $NODEJAR_HOME ]; then - echo "No node jar home found. cloning from depot..." - $(cd $COMMON_ROOT; hg clone https://hg.kenai.com/hg/nodejs~source nodejar >/dev/null 2>/dev/null) - $(cd $COMMON_ROOT/nodejar; ant >/dev/null) - echo "Done." - echo "Copying node files..." - $(cd $COMMON_ROOT/nodejar; ant copy-node-files >/dev/null 2>/dev/null) - echo "Patching node files..." - $(cd $COMMON_ROOT/nodejar; ant patch-node-files >/dev/null 2>/dev/null) - echo "Done." - fi - - echo "Ensuring node.jar is up to date from source depot..." - $(cd $COMMON_ROOT/nodejar; hg pull -u >/dev/null 2>/dev/null) - echo "Done." - - echo "Installing nashorn..." - $(cd $COMMON_ROOT/nodejar; ant >/dev/null) - echo "Done." - - echo "Running node.jar test..." - $(cd $COMMON_ROOT/nodejar; mvn clean verify >$TESTNODEJAR_OUTPUT) - echo "Done." - - failure_check $TESTNODEJAR_OUTPUT - - echo "**** SUCCESS: Node test successful." - - if [ $KEEP_OUTPUT == "true" ]; then - rm -fr $TESTNODEJAR_OUTPUT - cp $TESTNODEJAR_OUTPUT ./checkintest.nodejar.log - fi -} - -if [ $RUN_NODE != "false" ]; then - testnode; -fi; - -echo "Finished" |