diff options
Diffstat (limited to 'arch/mips/netlogic/common/reset.S')
| -rw-r--r-- | arch/mips/netlogic/common/reset.S | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S new file mode 100644 index 000000000000..adb18288a6c0 --- /dev/null +++ b/arch/mips/netlogic/common/reset.S @@ -0,0 +1,230 @@ +/* + * Copyright 2003-2013 Broadcom Corporation. + * All Rights Reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/asmmacro.h> +#include <asm/addrspace.h> + +#include <asm/netlogic/common.h> + +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/sys.h> +#include <asm/netlogic/xlp-hal/cpucontrol.h> + +#define CP0_EBASE $15 +#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ + XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ + SYS_CPU_NONCOHERENT_MODE * 4 + +/* Enable XLP features and workarounds in the LSU */ +.macro xlp_config_lsu + li t0, LSU_DEFEATURE + mfcr t1, t0 + + lui t2, 0xc080 /* SUE, Enable Unaligned Access, L2HPE */ + or t1, t1, t2 + mtcr t1, t0 + + li t0, ICU_DEFEATURE + mfcr t1, t0 + ori t1, 0x1000 /* Enable Icache partitioning */ + mtcr t1, t0 + + li t0, SCHED_DEFEATURE + lui t1, 0x0100 /* Disable BRU accepting ALU ops */ + mtcr t1, t0 +.endm + +/* + * Low level flush for L1D cache on XLP, the normal cache ops does + * not do the complete and correct cache flush. + */ +.macro xlp_flush_l1_dcache + li t0, LSU_DEBUG_DATA0 + li t1, LSU_DEBUG_ADDR + li t2, 0 /* index */ + li t3, 0x1000 /* loop count */ +1: + sll v0, t2, 5 + mtcr zero, t0 + ori v1, v0, 0x3 /* way0 | write_enable | write_active */ + mtcr v1, t1 +2: + mfcr v1, t1 + andi v1, 0x1 /* wait for write_active == 0 */ + bnez v1, 2b + nop + mtcr zero, t0 + ori v1, v0, 0x7 /* way1 | write_enable | write_active */ + mtcr v1, t1 +3: + mfcr v1, t1 + andi v1, 0x1 /* wait for write_active == 0 */ + bnez v1, 3b + nop + addi t2, 1 + bne t3, t2, 1b + nop +.endm + +/* + * nlm_reset_entry will be copied to the reset entry point for + * XLR and XLP. The XLP cores start here when they are woken up. This + * is also the NMI entry point. + * + * We use scratch reg 6/7 to save k0/k1 and check for NMI first. + * + * The data corresponding to reset/NMI is stored at RESET_DATA_PHYS + * location, this will have the thread mask (used when core is woken up) + * and the current NMI handler in case we reached here for an NMI. + * + * When a core or thread is newly woken up, it marks itself ready and + * loops in a 'wait'. When the CPU really needs waking up, we send an NMI + * IPI to it, with the NMI handler set to prom_boot_secondary_cpus + */ + .set noreorder + .set noat + .set arch=xlr /* for mfcr/mtcr, XLR is sufficient */ + +FEXPORT(nlm_reset_entry) + dmtc0 k0, $22, 6 + dmtc0 k1, $22, 7 + mfc0 k0, CP0_STATUS + li k1, 0x80000 + and k1, k0, k1 + beqz k1, 1f /* go to real reset entry */ + nop + li k1, CKSEG1ADDR(RESET_DATA_PHYS) /* NMI */ + ld k0, BOOT_NMI_HANDLER(k1) + jr k0 + nop + +1: /* Entry point on core wakeup */ + mfc0 t0, CP0_EBASE, 1 + mfc0 t1, CP0_EBASE, 1 + srl t1, 5 + andi t1, 0x3 /* t1 <- node */ + li t2, 0x40000 + mul t3, t2, t1 /* t3 = node * 0x40000 */ + srl t0, t0, 2 + and t0, t0, 0x7 /* t0 <- core */ + li t1, 0x1 + sll t0, t1, t0 + nor t0, t0, zero /* t0 <- ~(1 << core) */ + li t2, SYS_CPU_COHERENT_BASE(0) + add t2, t2, t3 /* t2 <- SYS offset for node */ + lw t1, 0(t2) + and t1, t1, t0 + sw t1, 0(t2) + + /* read back to ensure complete */ + lw t1, 0(t2) + sync + + /* Configure LSU on Non-0 Cores. */ + xlp_config_lsu + /* FALL THROUGH */ + +/* + * Wake up sibling threads from the initial thread in + * a core. + */ +EXPORT(nlm_boot_siblings) + /* core L1D flush before enable threads */ + xlp_flush_l1_dcache + /* Enable hw threads by writing to MAP_THREADMODE of the core */ + li t0, CKSEG1ADDR(RESET_DATA_PHYS) + lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */ + li t0, ((CPU_BLOCKID_MAP << 8) | MAP_THREADMODE) + mfcr t2, t0 + or t2, t2, t1 + mtcr t2, t0 + + /* + * The new hardware thread starts at the next instruction + * For all the cases other than core 0 thread 0, we will + * jump to the secondary wait function. + */ + mfc0 v0, CP0_EBASE, 1 + andi v0, 0x3ff /* v0 <- node/core */ + + beqz v0, 4f /* boot cpu (cpuid == 0)? */ + nop + + /* setup status reg */ + move t1, zero +#ifdef CONFIG_64BIT + ori t1, ST0_KX +#endif + mtc0 t1, CP0_STATUS + + /* mark CPU ready, careful here, previous mtcr trashed registers */ + li t3, CKSEG1ADDR(RESET_DATA_PHYS) + ADDIU t1, t3, BOOT_CPU_READY + sll v1, v0, 2 + PTR_ADDU t1, v1 + li t2, 1 + sw t2, 0(t1) + /* Wait until NMI hits */ +3: wait + b 3b + nop + + /* + * For the boot CPU, we have to restore registers and + * return + */ +4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */ + li t1, 0xfadebeef + dmtc0 t1, $4, 2 /* restore SP from UserLocal */ + PTR_SUBU sp, t0, PT_SIZE + RESTORE_ALL + jr ra + nop +EXPORT(nlm_reset_entry_end) + +LEAF(nlm_init_boot_cpu) +#ifdef CONFIG_CPU_XLP + xlp_config_lsu +#endif + jr ra + nop +END(nlm_init_boot_cpu) |