usb/core: update power budget for SuperSpeed

Sarah pointed out that the USB3.0 spec also updates the amount of power
that may be consumed by the device and quoted 9.2.5.1:

|"The amount of current draw for SuperSpeed devices are increased to 150
|mA for low-power devices and 900 mA for high-power"

This patch tries to update all users to use the larger values for
SuperSpeed devices and use the "old" ones for everything else.

While here, two other changes suggested by Alan:
- the comment referering to 7.2.1.1 has been updated to 7.2.1 which is
  the correct source of the action.
- the check for hubs with zero ports has been removed.
- compute bus power by full_load * num_ports on root hubs

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 41 insertions, 16 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 12913306840..0ef512aa289 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1351,6 +1351,8 @@ static int hub_configure(struct usb_hub *hub,
 	unsigned int pipe;
 	int maxp, ret, i;
 	char *message = "out of memory";
+	unsigned unit_load;
+	unsigned full_load;
 
 	hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
 	if (!hub->buffer) {
@@ -1397,6 +1399,13 @@ static int hub_configure(struct usb_hub *hub,
 	}
 
 	wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
+	if (hub_is_superspeed(hdev)) {
+		unit_load = 150;
+		full_load = 900;
+	} else {
+		unit_load = 100;
+		full_load = 500;
+	}
 
 	/* FIXME for USB 3.0, skip for now */
 	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
@@ -1516,40 +1525,44 @@ static int hub_configure(struct usb_hub *hub,
 		goto fail;
 	}
 	le16_to_cpus(&hubstatus);
+	hcd = bus_to_hcd(hdev->bus);
 	if (hdev == hdev->bus->root_hub) {
-		if (hdev->bus_mA == 0 || hdev->bus_mA >= 500)
-			hub->mA_per_port = 500;
+		if (hcd->power_budget > 0)
+			hdev->bus_mA = hcd->power_budget;
+		else
+			hdev->bus_mA = full_load * hdev->maxchild;
+		if (hdev->bus_mA >= full_load)
+			hub->mA_per_port = full_load;
 		else {
 			hub->mA_per_port = hdev->bus_mA;
 			hub->limited_power = 1;
 		}
 	} else if ((hubstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0) {
+		int remaining = hdev->bus_mA -
+			hub->descriptor->bHubContrCurrent;
+
 		dev_dbg(hub_dev, "hub controller current requirement: %dmA\n",
 			hub->descriptor->bHubContrCurrent);
 		hub->limited_power = 1;
-		if (hdev->maxchild > 0) {
-			int remaining = hdev->bus_mA -
-					hub->descriptor->bHubContrCurrent;
 
-			if (remaining < hdev->maxchild * 100)
-				dev_warn(hub_dev,
+		if (remaining < hdev->maxchild * unit_load)
+			dev_warn(hub_dev,
 					"insufficient power available "
 					"to use all downstream ports\n");
-			hub->mA_per_port = 100;		/* 7.2.1.1 */
-		}
+		hub->mA_per_port = unit_load;	/* 7.2.1 */
+
 	} else {	/* Self-powered external hub */
 		/* FIXME: What about battery-powered external hubs that
 		 * provide less current per port? */
-		hub->mA_per_port = 500;
+		hub->mA_per_port = full_load;
 	}
-	if (hub->mA_per_port < 500)
+	if (hub->mA_per_port < full_load)
 		dev_dbg(hub_dev, "%umA bus power budget for each child\n",
 				hub->mA_per_port);
 
 	/* Update the HCD's internal representation of this hub before khubd
 	 * starts getting port status changes for devices under the hub.
 	 */
-	hcd = bus_to_hcd(hdev->bus);
 	if (hcd->driver->update_hub_device) {
 		ret = hcd->driver->update_hub_device(hcd, hdev,
 				&hub->tt, GFP_KERNEL);
@@ -4204,16 +4217,23 @@ hub_power_remaining (struct usb_hub *hub)
 	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
 		struct usb_device	*udev = hub->ports[port1 - 1]->child;
 		int			delta;
+		unsigned		unit_load;
 
 		if (!udev)
 			continue;
+		if (hub_is_superspeed(udev))
+			unit_load = 150;
+		else
+			unit_load = 100;
 
-		/* Unconfigured devices may not use more than 100mA,
-		 * or 8mA for OTG ports */
+		/*
+		 * Unconfigured devices may not use more than one unit load,
+		 * or 8mA for OTG ports
+		 */
 		if (udev->actconfig)
 			delta = usb_get_max_power(udev, udev->actconfig);
 		else if (port1 != udev->bus->otg_port || hdev->parent)
-			delta = 100;
+			delta = unit_load;
 		else
 			delta = 8;
 		if (delta > hub->mA_per_port)
@@ -4248,6 +4268,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 			le16_to_cpu(hub->descriptor->wHubCharacteristics);
 	struct usb_device *udev;
 	int status, i;
+	unsigned unit_load;
 
 	dev_dbg (hub_dev,
 		"port %d, status %04x, change %04x, %s\n",
@@ -4337,6 +4358,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
   			goto done;
 		return;
 	}
+	if (hub_is_superspeed(hub->hdev))
+		unit_load = 150;
+	else
+		unit_load = 100;
 
 	for (i = 0; i < SET_CONFIG_TRIES; i++) {
 
@@ -4384,7 +4409,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 		 * on the parent.
 		 */
 		if (udev->descriptor.bDeviceClass == USB_CLASS_HUB
-				&& udev->bus_mA <= 100) {
+				&& udev->bus_mA <= unit_load) {
 			u16	devstat;
 
 			status = usb_get_status(udev, USB_RECIP_DEVICE, 0,