From fab3229af4e589d6a06201e14e2f3bfcc95ad9af Mon Sep 17 00:00:00 2001 From: Stephen Douthit Date: Mon, 7 Aug 2017 17:10:59 -0400 Subject: i2c: ismt: Don't duplicate the receive length for block reads commit b6c159a9cb69c2cf0bf59d4e12c3a2da77e4d994 upstream. According to Table 15-14 of the C2000 EDS (Intel doc #510524) the rx data pointed to by the descriptor dptr contains the byte count. desc->rxbytes reports all bytes read on the wire, including the "byte count" byte. So if a device sends 4 bytes in response to a block read, on the wire and in the DMA buffer we see: count data1 data2 data3 data4 0x04 0xde 0xad 0xbe 0xef That's what we want to return in data->block to the next level. Instead we were actually prefixing that with desc->rxbytes: bad count count data1 data2 data3 data4 0x05 0x04 0xde 0xad 0xbe 0xef This was discovered while developing a BMC solution relying on the ipmi_ssif.c driver which was trying to interpret the bogus length field as part of the IPMI response. Signed-off-by: Stephen Douthit Tested-by: Dan Priamo Acked-by: Neil Horman Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-ismt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 7ba795b24e75..f22b0e5778dd 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -339,8 +339,8 @@ static int ismt_process_desc(const struct ismt_desc *desc, break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_I2C_BLOCK_DATA: - memcpy(&data->block[1], dma_buffer, desc->rxbytes); - data->block[0] = desc->rxbytes; + memcpy(data->block, dma_buffer, desc->rxbytes); + data->block[0] = desc->rxbytes - 1; break; } return 0; -- cgit v1.2.3