From 73969ff0eda233f140bcbed1251431387b43f383 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 23:27:14 -0800 Subject: Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov --- Documentation/input/rotary-encoder.txt | 101 +++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/input/rotary-encoder.txt (limited to 'Documentation') diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt new file mode 100644 index 000000000000..435102a26d96 --- /dev/null +++ b/Documentation/input/rotary-encoder.txt @@ -0,0 +1,101 @@ +rotary-encoder - a generic driver for GPIO connected devices +Daniel Mack , Feb 2009 + +0. Function +----------- + +Rotary encoders are devices which are connected to the CPU or other +peripherals with two wires. The outputs are phase-shifted by 90 degrees +and by triggering on falling and rising edges, the turn direction can +be determined. + +The phase diagram of these two outputs look like this: + + _____ _____ _____ + | | | | | | + Channel A ____| |_____| |_____| |____ + + : : : : : : : : : : : : + __ _____ _____ _____ + | | | | | | | + Channel B |_____| |_____| |_____| |__ + + : : : : : : : : : : : : + Event a b c d a b c d a b c d + + |<-------->| + one step + + +For more information, please see + http://en.wikipedia.org/wiki/Rotary_encoder + + +1. Events / state machine +------------------------- + +a) Rising edge on channel A, channel B in low state + This state is used to recognize a clockwise turn + +b) Rising edge on channel B, channel A in high state + When entering this state, the encoder is put into 'armed' state, + meaning that there it has seen half the way of a one-step transition. + +c) Falling edge on channel A, channel B in high state + This state is used to recognize a counter-clockwise turn + +d) Falling edge on channel B, channel A in low state + Parking position. If the encoder enters this state, a full transition + should have happend, unless it flipped back on half the way. The + 'armed' state tells us about that. + +2. Platform requirements +------------------------ + +As there is no hardware dependent call in this driver, the platform it is +used with must support gpiolib. Another requirement is that IRQs must be +able to fire on both edges. + + +3. Board integration +-------------------- + +To use this driver in your system, register a platform_device with the +name 'rotary-encoder' and associate the IRQs and some specific platform +data with it. + +struct rotary_encoder_platform_data is declared in +include/linux/rotary-encoder.h and needs to be filled with the number of +steps the encoder has and can carry information about externally inverted +signals (because of used invertig buffer or other reasons). + +Because GPIO to IRQ mapping is platform specific, this information must +be given in seperately to the driver. See the example below. + +------------------ + +/* board support file example */ + +#include +#include + +#define GPIO_ROTARY_A 1 +#define GPIO_ROTARY_B 2 + +static struct rotary_encoder_platform_data my_rotary_encoder_info = { + .steps = 24, + .axis = ABS_X, + .gpio_a = GPIO_ROTARY_A, + .gpio_b = GPIO_ROTARY_B, + .inverted_a = 0, + .inverted_b = 0, +}; + +static struct platform_device rotary_encoder_device = { + .name = "rotary-encoder", + .id = 0, + .dev = { + .platform_data = &my_rotary_encoder_info, + } +}; + -- cgit v1.2.3 From ef12fefabf94b6a902ad3abd3eb124b00560c445 Mon Sep 17 00:00:00 2001 From: Bharata B Rao Date: Tue, 31 Mar 2009 10:02:22 +0530 Subject: cpuacct: add per-cgroup utime/stime statistics Add per-cgroup cpuacct controller statistics like the system and user time consumed by the group of tasks. Changelog: v7 - Changed the name of the statistic from utime to user and from stime to system so that in future we could easily add other statistics like irq, softirq, steal times etc easily. v6 - Fixed a bug in the error path of cpuacct_create() (pointed by Li Zefan). v5 - In cpuacct_stats_show(), use cputime64_to_clock_t() since we are operating on a 64bit variable here. v4 - Remove comments in cpuacct_update_stats() which explained why rcu_read_lock() was needed (as per Peter Zijlstra's review comments). - Don't say that percpu_counter_read() is broken in Documentation/cpuacct.txt as per KAMEZAWA Hiroyuki's review comments. v3 - Fix a small race in the cpuacct hierarchy walk. v2 - stime and utime now exported in clock_t units instead of msecs. - Addressed the code review comments from Balbir and Li Zefan. - Moved to -tip tree. v1 - Moved the stime/utime accounting to cpuacct controller. Earlier versions - http://lkml.org/lkml/2009/2/25/129 Signed-off-by: Bharata B Rao Signed-off-by: Balaji Rao Cc: Dhaval Giani Cc: Paul Menage Cc: Andrew Morton Cc: KAMEZAWA Hiroyuki Reviewed-by: Li Zefan Acked-by: Peter Zijlstra Acked-by: Balbir Singh Tested-by: Balbir Singh LKML-Reference: <20090331043222.GA4093@in.ibm.com> Signed-off-by: Ingo Molnar --- Documentation/cgroups/cpuacct.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'Documentation') diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt index bb775fbe43d7..8b930946c52a 100644 --- a/Documentation/cgroups/cpuacct.txt +++ b/Documentation/cgroups/cpuacct.txt @@ -30,3 +30,21 @@ The above steps create a new group g1 and move the current shell process (bash) into it. CPU time consumed by this bash and its children can be obtained from g1/cpuacct.usage and the same is accumulated in /cgroups/cpuacct.usage also. + +cpuacct.stat file lists a few statistics which further divide the +CPU time obtained by the cgroup into user and system times. Currently +the following statistics are supported: + +user: Time spent by tasks of the cgroup in user mode. +system: Time spent by tasks of the cgroup in kernel mode. + +user and system are in USER_HZ unit. + +cpuacct controller uses percpu_counter interface to collect user and +system times. This has two side effects: + +- It is theoretically possible to see wrong values for user and system times. + This is because percpu_counter_read() on 32bit systems isn't safe + against concurrent writes. +- It is possible to see slightly outdated values for user and system times + due to the batch processing nature of percpu_counter. -- cgit v1.2.3 From 6a3335b43342b42dd6c69b4bbbde15d622cb49ca Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 Apr 2009 13:52:01 -0700 Subject: IPoIB: Document newish features Update the documentation to include connected mode, stateless offloads and interrupt moderation, and add a reference to the connected mode RFC. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- Documentation/infiniband/ipoib.txt | 45 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'Documentation') diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt index 864ff3283780..6d40f00b358c 100644 --- a/Documentation/infiniband/ipoib.txt +++ b/Documentation/infiniband/ipoib.txt @@ -24,6 +24,49 @@ Partitions and P_Keys The P_Key for any interface is given by the "pkey" file, and the main interface for a subinterface is in "parent." +Datagram vs Connected modes + + The IPoIB driver supports two modes of operation: datagram and + connected. The mode is set and read through an interface's + /sys/class/net//mode file. + + In datagram mode, the IB UD (Unreliable Datagram) transport is used + and so the interface MTU has is equal to the IB L2 MTU minus the + IPoIB encapsulation header (4 bytes). For example, in a typical IB + fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes. + + In connected mode, the IB RC (Reliable Connected) transport is used. + Connected mode is to takes advantage of the connected nature of the + IB transport and allows an MTU up to the maximal IP packet size of + 64K, which reduces the number of IP packets needed for handling + large UDP datagrams, TCP segments, etc and increases the performance + for large messages. + + In connected mode, the interface's UD QP is still used for multicast + and communication with peers that don't support connected mode. In + this case, RX emulation of ICMP PMTU packets is used to cause the + networking stack to use the smaller UD MTU for these neighbours. + +Stateless offloads + + If the IB HW supports IPoIB stateless offloads, IPoIB advertises + TCP/IP checksum and/or Large Send (LSO) offloading capability to the + network stack. + + Large Receive (LRO) offloading is also implemented and may be turned + on/off using ethtool calls. Currently LRO is supported only for + checksum offload capable devices. + + Stateless offloads are supported only in datagram mode. + +Interrupt moderation + + If the underlying IB device supports CQ event moderation, one can + use ethtool to set interrupt mitigation parameters and thus reduce + the overhead incurred by handling interrupts. The main code path of + IPoIB doesn't use events for TX completion signaling so only RX + moderation is supported. + Debugging Information By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set @@ -55,3 +98,5 @@ References http://ietf.org/rfc/rfc4391.txt IP over InfiniBand (IPoIB) Architecture (RFC 4392) http://ietf.org/rfc/rfc4392.txt + IP over InfiniBand: Connected Mode (RFC 4755) + http://ietf.org/rfc/rfc4755.txt -- cgit v1.2.3 From 66bb74888eb4bef4ba7c87c931ecb7ecca3a240c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 9 Apr 2009 11:40:27 +0800 Subject: tracing: consolidate documents Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to the new trace/ directory. I didnt find any references to those documents in both source files and documents, so no extra work needs to be done. Signed-off-by: Li Zefan Acked-by: Pekka Paalanen Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Mathieu Desnoyers LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 1828 ----------------------------------- Documentation/trace/ftrace.txt | 1828 +++++++++++++++++++++++++++++++++++ Documentation/trace/kmemtrace.txt | 126 +++ Documentation/trace/mmiotrace.txt | 163 ++++ Documentation/trace/tracepoints.txt | 116 +++ Documentation/tracepoints.txt | 116 --- Documentation/tracers/mmiotrace.txt | 163 ---- Documentation/vm/kmemtrace.txt | 126 --- 8 files changed, 2233 insertions(+), 2233 deletions(-) delete mode 100644 Documentation/ftrace.txt create mode 100644 Documentation/trace/ftrace.txt create mode 100644 Documentation/trace/kmemtrace.txt create mode 100644 Documentation/trace/mmiotrace.txt create mode 100644 Documentation/trace/tracepoints.txt delete mode 100644 Documentation/tracepoints.txt delete mode 100644 Documentation/tracers/mmiotrace.txt delete mode 100644 Documentation/vm/kmemtrace.txt (limited to 'Documentation') diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt deleted file mode 100644 index fd9a3e693813..000000000000 --- a/Documentation/ftrace.txt +++ /dev/null @@ -1,1828 +0,0 @@ - ftrace - Function Tracer - ======================== - -Copyright 2008 Red Hat Inc. - Author: Steven Rostedt - License: The GNU Free Documentation License, Version 1.2 - (dual licensed under the GPL v2) -Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, - John Kacur, and David Teigland. - -Written for: 2.6.28-rc2 - -Introduction ------------- - -Ftrace is an internal tracer designed to help out developers and -designers of systems to find what is going on inside the kernel. -It can be used for debugging or analyzing latencies and -performance issues that take place outside of user-space. - -Although ftrace is the function tracer, it also includes an -infrastructure that allows for other types of tracing. Some of -the tracers that are currently in ftrace include a tracer to -trace context switches, the time it takes for a high priority -task to run after it was woken up, the time interrupts are -disabled, and more (ftrace allows for tracer plugins, which -means that the list of tracers can always grow). - - -The File System ---------------- - -Ftrace uses the debugfs file system to hold the control files as -well as the files to display output. - -To mount the debugfs system: - - # mkdir /debug - # mount -t debugfs nodev /debug - -( Note: it is more common to mount at /sys/kernel/debug, but for - simplicity this document will use /debug) - -That's it! (assuming that you have ftrace configured into your kernel) - -After mounting the debugfs, you can see a directory called -"tracing". This directory contains the control and output files -of ftrace. Here is a list of some of the key files: - - - Note: all time values are in microseconds. - - current_tracer: - - This is used to set or display the current tracer - that is configured. - - available_tracers: - - This holds the different types of tracers that - have been compiled into the kernel. The - tracers listed here can be configured by - echoing their name into current_tracer. - - tracing_enabled: - - This sets or displays whether the current_tracer - is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 to enable it. - - trace: - - This file holds the output of the trace in a human - readable format (described below). - - latency_trace: - - This file shows the same trace but the information - is organized more to display possible latencies - in the system (described below). - - trace_pipe: - - The output is the same as the "trace" file but this - file is meant to be streamed with live tracing. - Reads from this file will block until new data - is retrieved. Unlike the "trace" and "latency_trace" - files, this file is a consumer. This means reading - from this file causes sequential reads to display - more current data. Once data is read from this - file, it is consumed, and will not be read - again with a sequential read. The "trace" and - "latency_trace" files are static, and if the - tracer is not adding more data, they will display - the same information every time they are read. - - trace_options: - - This file lets the user control the amount of data - that is displayed in one of the above output - files. - - tracing_max_latency: - - Some of the tracers record the max latency. - For example, the time interrupts are disabled. - This time is saved in this file. The max trace - will also be stored, and displayed by either - "trace" or "latency_trace". A new max trace will - only be recorded if the latency is greater than - the value in this file. (in microseconds) - - buffer_size_kb: - - This sets or displays the number of kilobytes each CPU - buffer can hold. The tracer buffers are the same size - for each CPU. The displayed number is the size of the - CPU buffer and not total size of all buffers. The - trace buffers are allocated in pages (blocks of memory - that the kernel uses for allocation, usually 4 KB in size). - If the last page allocated has room for more bytes - than requested, the rest of the page will be used, - making the actual allocation bigger than requested. - ( Note, the size may not be a multiple of the page size - due to buffer managment overhead. ) - - This can only be updated when the current_tracer - is set to "nop". - - tracing_cpumask: - - This is a mask that lets the user only trace - on specified CPUS. The format is a hex string - representing the CPUS. - - set_ftrace_filter: - - When dynamic ftrace is configured in (see the - section below "dynamic ftrace"), the code is dynamically - modified (code text rewrite) to disable calling of the - function profiler (mcount). This lets tracing be configured - in with practically no overhead in performance. This also - has a side effect of enabling or disabling specific functions - to be traced. Echoing names of functions into this file - will limit the trace to only those functions. - - set_ftrace_notrace: - - This has an effect opposite to that of - set_ftrace_filter. Any function that is added here will not - be traced. If a function exists in both set_ftrace_filter - and set_ftrace_notrace, the function will _not_ be traced. - - set_ftrace_pid: - - Have the function tracer only trace a single thread. - - set_graph_function: - - Set a "trigger" function where tracing should start - with the function graph tracer (See the section - "dynamic ftrace" for more details). - - available_filter_functions: - - This lists the functions that ftrace - has processed and can trace. These are the function - names that you can pass to "set_ftrace_filter" or - "set_ftrace_notrace". (See the section "dynamic ftrace" - below for more details.) - - -The Tracers ------------ - -Here is the list of current tracers that may be configured. - - "function" - - Function call tracer to trace all kernel functions. - - "function_graph_tracer" - - Similar to the function tracer except that the - function tracer probes the functions on their entry - whereas the function graph tracer traces on both entry - and exit of the functions. It then provides the ability - to draw a graph of function calls similar to C code - source. - - "sched_switch" - - Traces the context switches and wakeups between tasks. - - "irqsoff" - - Traces the areas that disable interrupts and saves - the trace with the longest max latency. - See tracing_max_latency. When a new max is recorded, - it replaces the old trace. It is best to view this - trace via the latency_trace file. - - "preemptoff" - - Similar to irqsoff but traces and records the amount of - time for which preemption is disabled. - - "preemptirqsoff" - - Similar to irqsoff and preemptoff, but traces and - records the largest time for which irqs and/or preemption - is disabled. - - "wakeup" - - Traces and records the max latency that it takes for - the highest priority task to get scheduled after - it has been woken up. - - "hw-branch-tracer" - - Uses the BTS CPU feature on x86 CPUs to traces all - branches executed. - - "nop" - - This is the "trace nothing" tracer. To remove all - tracers from tracing simply echo "nop" into - current_tracer. - - -Examples of using the tracer ----------------------------- - -Here are typical examples of using the tracers when controlling -them only with the debugfs interface (without using any -user-land utilities). - -Output format: --------------- - -Here is an example of the output format of the file "trace" - - -------- -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4251 [01] 10152.583854: path_put <-path_walk - bash-4251 [01] 10152.583855: dput <-path_put - bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput - -------- - -A header is printed with the tracer name that is represented by -the trace. In this case the tracer is "function". Then a header -showing the format. Task name "bash", the task PID "4251", the -CPU that it was running on "01", the timestamp in . -format, the function name that was traced "path_put" and the -parent function that called this function "path_walk". The -timestamp is the time at which the function was entered. - -The sched_switch tracer also includes tracing of task wakeups -and context switches. - - ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S - ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S - ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R - events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R - kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R - ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R - -Wake ups are represented by a "+" and the context switches are -shown as "==>". The format is: - - Context switches: - - Previous task Next Task - - :: ==> :: - - Wake ups: - - Current task Task waking up - - :: + :: - -The prio is the internal kernel priority, which is the inverse -of the priority that is usually displayed by user-space tools. -Zero represents the highest priority (99). Prio 100 starts the -"nice" priorities with 100 being equal to nice -20 and 139 being -nice 19. The prio "140" is reserved for the idle task which is -the lowest priority thread (pid 0). - - -Latency trace format --------------------- - -For traces that display latency times, the latency_trace file -gives somewhat more information to see why a latency happened. -Here is a typical trace. - -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: apic_timer_interrupt - => ended at: do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - -0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt) - -0 0d.s. 97us : __do_softirq (do_softirq) - -0 0d.s1 98us : trace_hardirqs_on (do_softirq) - - -This shows that the current tracer is "irqsoff" tracing the time -for which interrupts were disabled. It gives the trace version -and the version of the kernel upon which this was executed on -(2.6.26-rc8). Then it displays the max latency in microsecs (97 -us). The number of trace entries displayed and the total number -recorded (both are three: #3/3). The type of preemption that was -used (PREEMPT). VP, KP, SP, and HP are always zero and are -reserved for later use. #P is the number of online CPUS (#P:2). - -The task is the process that was running when the latency -occurred. (swapper pid: 0). - -The start and stop (the functions in which the interrupts were -disabled and enabled respectively) that caused the latencies: - - apic_timer_interrupt is where the interrupts were disabled. - do_softirq is where they were enabled again. - -The next lines after the header are the trace itself. The header -explains which is which. - - cmd: The name of the process in the trace. - - pid: The PID of that process. - - CPU#: The CPU which the process was running on. - - irqs-off: 'd' interrupts are disabled. '.' otherwise. - Note: If the architecture does not support a way to - read the irq flags variable, an 'X' will always - be printed here. - - need-resched: 'N' task need_resched is set, '.' otherwise. - - hardirq/softirq: - 'H' - hard irq occurred inside a softirq. - 'h' - hard irq is running - 's' - soft irq is running - '.' - normal context. - - preempt-depth: The level of preempt_disabled - -The above is mostly meaningful for kernel developers. - - time: This differs from the trace file output. The trace file output - includes an absolute timestamp. The timestamp used by the - latency_trace file is relative to the start of the trace. - - delay: This is just to help catch your eye a bit better. And - needs to be fixed to be only relative to the same CPU. - The marks are determined by the difference between this - current trace and the next trace. - '!' - greater than preempt_mark_thresh (default 100) - '+' - greater than 1 microsecond - ' ' - less than or equal to 1 microsecond. - - The rest is the same as the 'trace' file. - - -trace_options -------------- - -The trace_options file is used to control what gets printed in -the trace output. To see what is available, simply cat the file: - - cat /debug/tracing/trace_options - print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ - noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj - -To disable one of the options, echo in the option prepended with -"no". - - echo noprint-parent > /debug/tracing/trace_options - -To enable an option, leave off the "no". - - echo sym-offset > /debug/tracing/trace_options - -Here are the available options: - - print-parent - On function traces, display the calling (parent) - function as well as the function being traced. - - print-parent: - bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul - - noprint-parent: - bash-4000 [01] 1477.606694: simple_strtoul - - - sym-offset - Display not only the function name, but also the - offset in the function. For example, instead of - seeing just "ktime_get", you will see - "ktime_get+0xb/0x20". - - sym-offset: - bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 - - sym-addr - this will also display the function address as well - as the function name. - - sym-addr: - bash-4000 [01] 1477.606694: simple_strtoul - - verbose - This deals with the latency_trace file. - - bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ - (+0.000ms): simple_strtoul (strict_strtoul) - - raw - This will display raw numbers. This option is best for - use with user applications that can translate the raw - numbers better than having it done in the kernel. - - hex - Similar to raw, but the numbers will be in a hexadecimal - format. - - bin - This will print out the formats in raw binary. - - block - TBD (needs update) - - stacktrace - This is one of the options that changes the trace - itself. When a trace is recorded, so is the stack - of functions. This allows for back traces of - trace sites. - - userstacktrace - This option changes the trace. It records a - stacktrace of the current userspace thread. - - sym-userobj - when user stacktrace are enabled, look up which - object the address belongs to, and print a - relative address. This is especially useful when - ASLR is on, otherwise you don't get a chance to - resolve the address to object/file/line after - the app is no longer running - - The lookup is performed when you read - trace,trace_pipe,latency_trace. Example: - - a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 -x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] - - sched-tree - trace all tasks that are on the runqueue, at - every scheduling event. Will add overhead if - there's a lot of tasks running at once. - - -sched_switch ------------- - -This tracer simply records schedule switches. Here is an example -of how to use it. - - # echo sched_switch > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # sleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace - -# tracer: sched_switch -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R - bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R - sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R - bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S - bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R - sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R - bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D - bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R - -0 [00] 240.132589: 0:140:R + 4:115:S - -0 [00] 240.132591: 0:140:R ==> 4:115:R - ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R - -0 [00] 240.132598: 0:140:R + 4:115:S - -0 [00] 240.132599: 0:140:R ==> 4:115:R - ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R - sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R - [...] - - -As we have discussed previously about this format, the header -shows the name of the trace and points to the options. The -"FUNCTION" is a misnomer since here it represents the wake ups -and context switches. - -The sched_switch file only lists the wake ups (represented with -'+') and context switches ('==>') with the previous task or -current task first followed by the next task or task waking up. -The format for both of these is PID:KERNEL-PRIO:TASK-STATE. -Remember that the KERNEL-PRIO is the inverse of the actual -priority with zero (0) being the highest priority and the nice -values starting at 100 (nice -20). Below is a quick chart to map -the kernel priority to user land priorities. - - Kernel priority: 0 to 99 ==> user RT priority 99 to 0 - Kernel priority: 100 to 139 ==> user nice -20 to 19 - Kernel priority: 140 ==> idle task priority - -The task states are: - - R - running : wants to run, may not actually be running - S - sleep : process is waiting to be woken up (handles signals) - D - disk sleep (uninterruptible sleep) : process must be woken up - (ignores signals) - T - stopped : process suspended - t - traced : process is being traced (with something like gdb) - Z - zombie : process waiting to be cleaned up - X - unknown - - -ftrace_enabled --------------- - -The following tracers (listed below) give different output -depending on whether or not the sysctl ftrace_enabled is set. To -set ftrace_enabled, one can either use the sysctl function or -set it via the proc file system interface. - - sysctl kernel.ftrace_enabled=1 - - or - - echo 1 > /proc/sys/kernel/ftrace_enabled - -To disable ftrace_enabled simply replace the '1' with '0' in the -above commands. - -When ftrace_enabled is set the tracers will also record the -functions that are within the trace. The descriptions of the -tracers will also show an example with ftrace enabled. - - -irqsoff -------- - -When interrupts are disabled, the CPU can not react to any other -external event (besides NMIs and SMIs). This prevents the timer -interrupt from triggering or the mouse interrupt from letting -the kernel know of a new mouse event. The result is a latency -with the reaction time. - -The irqsoff tracer tracks the time for which interrupts are -disabled. When a new maximum latency is hit, the tracer saves -the trace leading up to that latency point so that every time a -new maximum is reached, the old saved trace is discarded and the -new trace is saved. - -To reset the maximum, echo 0 into tracing_max_latency. Here is -an example: - - # echo irqsoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26 --------------------------------------------------------------------- - latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: sys_setpgid - => ended at: sys_setpgid - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) - bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) - bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) - - -Here we see that that we had a latency of 12 microsecs (which is -very good). The _write_lock_irq in sys_setpgid disabled -interrupts. The difference between the 12 and the displayed -timestamp 14us occurred because the clock was incremented -between the time of recording the max latency and the time of -recording the function that had that latency. - -Note the above example had ftrace_enabled not set. If we set the -ftrace_enabled, we get a much larger output: - -# tracer: irqsoff -# -irqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: __alloc_pages_internal - => ended at: __alloc_pages_internal - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal) - ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist) - ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk) - ls-4339 0d..1 4us : add_preempt_count (_spin_lock) - ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue) -[...] - ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk) - ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue) - ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest) - ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk) - ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock) - ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal) - ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) - - - -Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that by -enabling function tracing, we incur an added overhead. This -overhead may extend the latency times. But nevertheless, this -trace has provided some very helpful debugging information. - - -preemptoff ----------- - -When preemption is disabled, we may be able to receive -interrupts but the task cannot be preempted and a higher -priority task must wait for preemption to be enabled again -before it can preempt a lower priority task. - -The preemptoff tracer traces the places that disable preemption. -Like the irqsoff tracer, it records the maximum latency for -which preemption was disabled. The control of preemptoff tracer -is much like the irqsoff tracer. - - # echo preemptoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: preemptoff -# -preemptoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: do_IRQ - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - sshd-4261 0d.h. 0us+: irq_enter (do_IRQ) - sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) - - -This has some more changes. Preemption was disabled when an -interrupt came in (notice the 'h'), and was enabled while doing -a softirq. (notice the 's'). But we also see that interrupts -have been disabled when entering the preempt off section and -leaving it (the 'd'). We do not know if interrupts were enabled -in the mean time. - -# tracer: preemptoff -# -preemptoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: remove_wait_queue - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue) - sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue) - sshd-4261 0d..1 2us : do_IRQ (common_interrupt) - sshd-4261 0d..1 2us : irq_enter (do_IRQ) - sshd-4261 0d..1 2us : idle_cpu (irq_enter) - sshd-4261 0d..1 3us : add_preempt_count (irq_enter) - sshd-4261 0d.h1 3us : idle_cpu (irq_enter) - sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ) -[...] - sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock) - sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq) - sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq) - sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock) - sshd-4261 0d.h1 14us : irq_exit (do_IRQ) - sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit) - sshd-4261 0d..2 15us : do_softirq (irq_exit) - sshd-4261 0d... 15us : __do_softirq (do_softirq) - sshd-4261 0d... 16us : __local_bh_disable (__do_softirq) - sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable) -[...] - sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable) - sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable) - sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable) -[...] - sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) - - -The above is an example of the preemptoff trace with -ftrace_enabled set. Here we see that interrupts were disabled -the entire time. The irq_enter code lets us know that we entered -an interrupt 'h'. Before that, the functions being traced still -show that it is not in an interrupt, but we can see from the -functions themselves that this is not the case. - -Notice that __do_softirq when called does not have a -preempt_count. It may seem that we missed a preempt enabling. -What really happened is that the preempt count is held on the -thread's stack and we switched to the softirq stack (4K stacks -in effect). The code does not copy the preempt count, but -because interrupts are disabled, we do not need to worry about -it. Having a tracer like this is good for letting people know -what really happens inside the kernel. - - -preemptirqsoff --------------- - -Knowing the locations that have interrupts disabled or -preemption disabled for the longest times is helpful. But -sometimes we would like to know when either preemption and/or -interrupts are disabled. - -Consider the following code: - - local_irq_disable(); - call_function_with_irqs_off(); - preempt_disable(); - call_function_with_irqs_and_preemption_off(); - local_irq_enable(); - call_function_with_preemption_off(); - preempt_enable(); - -The irqsoff tracer will record the total length of -call_function_with_irqs_off() and -call_function_with_irqs_and_preemption_off(). - -The preemptoff tracer will record the total length of -call_function_with_irqs_and_preemption_off() and -call_function_with_preemption_off(). - -But neither will trace the time that interrupts and/or -preemption is disabled. This total time is the time that we can -not schedule. To record this time, use the preemptirqsoff -tracer. - -Again, using this trace is much like the irqsoff and preemptoff -tracers. - - # echo preemptirqsoff > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # ls -ltr - [...] - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: preemptirqsoff -# -preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: apic_timer_interrupt - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt) - ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq) - ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) - - - -The trace_hardirqs_off_thunk is called from assembly on x86 when -interrupts are disabled in the assembly code. Without the -function tracing, we do not know if interrupts were enabled -within the preemption points. We do see that it started with -preemption enabled. - -Here is a trace with ftrace_enabled set: - - -# tracer: preemptirqsoff -# -preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) - ----------------- - => started at: write_chan - => ended at: __do_softirq - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - ls-4473 0.N.. 0us : preempt_schedule (write_chan) - ls-4473 0dN.1 1us : _spin_lock (schedule) - ls-4473 0dN.1 2us : add_preempt_count (_spin_lock) - ls-4473 0d..2 2us : put_prev_task_fair (schedule) -[...] - ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts) - ls-4473 0d..2 13us : __switch_to (schedule) - sshd-4261 0d..2 14us : finish_task_switch (schedule) - sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch) - sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave) - sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set) - sshd-4261 0d..2 16us : do_IRQ (common_interrupt) - sshd-4261 0d..2 17us : irq_enter (do_IRQ) - sshd-4261 0d..2 17us : idle_cpu (irq_enter) - sshd-4261 0d..2 18us : add_preempt_count (irq_enter) - sshd-4261 0d.h2 18us : idle_cpu (irq_enter) - sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ) - sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq) - sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock) - sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock) -[...] - sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq) - sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock) - sshd-4261 0d.h2 29us : irq_exit (do_IRQ) - sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit) - sshd-4261 0d..3 30us : do_softirq (irq_exit) - sshd-4261 0d... 30us : __do_softirq (do_softirq) - sshd-4261 0d... 31us : __local_bh_disable (__do_softirq) - sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable) - sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable) -[...] - sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip) - sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt) - sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt) - sshd-4261 0d.s3 45us : idle_cpu (irq_enter) - sshd-4261 0d.s3 46us : add_preempt_count (irq_enter) - sshd-4261 0d.H3 46us : idle_cpu (irq_enter) - sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt) - sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt) -[...] - sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt) - sshd-4261 0d.H3 82us : ktime_get (tick_program_event) - sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get) - sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts) - sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts) - sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event) - sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event) - sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt) - sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit) - sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit) - sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable) -[...] - sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action) - sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq) - sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq) - sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable) - sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq) - sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) - - -This is a very interesting trace. It started with the preemption -of the ls task. We see that the task had the "need_resched" bit -set via the 'N' in the trace. Interrupts were disabled before -the spin_lock at the beginning of the trace. We see that a -schedule took place to run sshd. When the interrupts were -enabled, we took an interrupt. On return from the interrupt -handler, the softirq ran. We took another interrupt while -running the softirq as we see from the capital 'H'. - - -wakeup ------- - -In a Real-Time environment it is very important to know the -wakeup time it takes for the highest priority task that is woken -up to the time that it executes. This is also known as "schedule -latency". I stress the point that this is about RT tasks. It is -also important to know the scheduling latency of non-RT tasks, -but the average schedule latency is better for non-RT tasks. -Tools like LatencyTop are more appropriate for such -measurements. - -Real-Time environments are interested in the worst case latency. -That is the longest latency it takes for something to happen, -and not the average. We can have a very fast scheduler that may -only have a large latency once in a while, but that would not -work well with Real-Time tasks. The wakeup tracer was designed -to record the worst case wakeups of RT tasks. Non-RT tasks are -not recorded because the tracer only records one worst case and -tracing non-RT tasks that are unpredictable will overwrite the -worst case latency of RT tasks. - -Since this tracer only deals with RT tasks, we will run this -slightly differently than we did with the previous tracers. -Instead of performing an 'ls', we will run 'sleep 1' under -'chrt' which changes the priority of the task. - - # echo wakeup > /debug/tracing/current_tracer - # echo 0 > /debug/tracing/tracing_max_latency - # echo 1 > /debug/tracing/tracing_enabled - # chrt -f 5 sleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/latency_trace -# tracer: wakeup -# -wakeup latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5) - ----------------- - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / - -0 1d.h4 0us+: try_to_wake_up (wake_up_process) - -0 1d..4 4us : schedule (cpu_idle) - - -Running this on an idle system, we see that it only took 4 -microseconds to perform the task switch. Note, since the trace -marker in the schedule is before the actual "switch", we stop -the tracing when the recorded task is about to schedule in. This -may change if we add a new marker at the end of the scheduler. - -Notice that the recorded task is 'sleep' with the PID of 4901 -and it has an rt_prio of 5. This priority is user-space priority -and not the internal kernel priority. The policy is 1 for -SCHED_FIFO and 2 for SCHED_RR. - -Doing the same with chrt -r 5 and ftrace_enabled set. - -# tracer: wakeup -# -wakeup latency trace v1.1.5 on 2.6.26-rc8 --------------------------------------------------------------------- - latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) - ----------------- - | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5) - ----------------- - -# _------=> CPU# -# / _-----=> irqs-off -# | / _----=> need-resched -# || / _---=> hardirq/softirq -# ||| / _--=> preempt-depth -# |||| / -# ||||| delay -# cmd pid ||||| time | caller -# \ / ||||| \ | / -ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process) -ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb) -ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up) -ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup) -ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr) -ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup) -ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up) -ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up) -[...] -ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt) -ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit) -ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit) -ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq) -[...] -ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks) -ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq) -ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable) -ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd) -ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd) -ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched) -ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched) -ksoftirq-7 1.N.2 33us : schedule (__cond_resched) -ksoftirq-7 1.N.2 33us : add_preempt_count (schedule) -ksoftirq-7 1.N.3 34us : hrtick_clear (schedule) -ksoftirq-7 1dN.3 35us : _spin_lock (schedule) -ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock) -ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule) -ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair) -[...] -ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline) -ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock) -ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) -ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) -ksoftirq-7 1d..4 50us : schedule (__cond_resched) - -The interrupt went off while running ksoftirqd. This task runs -at SCHED_OTHER. Why did not we see the 'N' set early? This may -be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K -stacks configured, the interrupt and softirq run with their own -stack. Some information is held on the top of the task's stack -(need_resched and preempt_count are both stored there). The -setting of the NEED_RESCHED bit is done directly to the task's -stack, but the reading of the NEED_RESCHED is done by looking at -the current stack, which in this case is the stack for the hard -interrupt. This hides the fact that NEED_RESCHED has been set. -We do not see the 'N' until we switch back to the task's -assigned stack. - -function --------- - -This tracer is the function tracer. Enabling the function tracer -can be done from the debug file system. Make sure the -ftrace_enabled is set; otherwise this tracer is a nop. - - # sysctl kernel.ftrace_enabled=1 - # echo function > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4003 [00] 123.638713: finish_task_switch <-schedule - bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch - bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq - bash-4003 [00] 123.638715: hrtick_set <-schedule - bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set - bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave - bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set - bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore - bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set - bash-4003 [00] 123.638718: sub_preempt_count <-schedule - bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule - bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run - bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion - bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common - bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq -[...] - - -Note: function tracer uses ring buffers to store the above -entries. The newest data may overwrite the oldest data. -Sometimes using echo to stop the trace is not sufficient because -the tracing could have overwritten the data that you wanted to -record. For this reason, it is sometimes better to disable -tracing directly from a program. This allows you to stop the -tracing at the point that you hit the part that you are -interested in. To disable the tracing directly from a C program, -something like following code snippet can be used: - -int trace_fd; -[...] -int main(int argc, char *argv[]) { - [...] - trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); - [...] - if (condition_hit()) { - write(trace_fd, "0", 1); - } - [...] -} - -Note: Here we hard coded the path name. The debugfs mount is not -guaranteed to be at /debug (and is more commonly at -/sys/kernel/debug). For simple one time traces, the above is -sufficent. For anything else, a search through /proc/mounts may -be needed to find where the debugfs file-system is mounted. - - -Single thread tracing ---------------------- - -By writing into /debug/tracing/set_ftrace_pid you can trace a -single thread. For example: - -# cat /debug/tracing/set_ftrace_pid -no pid -# echo 3111 > /debug/tracing/set_ftrace_pid -# cat /debug/tracing/set_ftrace_pid -3111 -# echo function > /debug/tracing/current_tracer -# cat /debug/tracing/trace | head - # tracer: function - # - # TASK-PID CPU# TIMESTAMP FUNCTION - # | | | | | - yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return - yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range - yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel - yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel - yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll - yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll -# echo -1 > /debug/tracing/set_ftrace_pid -# cat /debug/tracing/trace |head - # tracer: function - # - # TASK-PID CPU# TIMESTAMP FUNCTION - # | | | | | - ##### CPU 3 buffer started #### - yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait - yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry - yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry - yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit - yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit - -If you want to trace a function when executing, you could use -something like this simple program: - -#include -#include -#include -#include -#include -#include - -int main (int argc, char **argv) -{ - if (argc < 1) - exit(-1); - - if (fork() > 0) { - int fd, ffd; - char line[64]; - int s; - - ffd = open("/debug/tracing/current_tracer", O_WRONLY); - if (ffd < 0) - exit(-1); - write(ffd, "nop", 3); - - fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY); - s = sprintf(line, "%d\n", getpid()); - write(fd, line, s); - - write(ffd, "function", 8); - - close(fd); - close(ffd); - - execvp(argv[1], argv+1); - } - - return 0; -} - - -hw-branch-tracer (x86 only) ---------------------------- - -This tracer uses the x86 last branch tracing hardware feature to -collect a branch trace on all cpus with relatively low overhead. - -The tracer uses a fixed-size circular buffer per cpu and only -traces ring 0 branches. The trace file dumps that buffer in the -following format: - -# tracer: hw-branch-tracer -# -# CPU# TO <- FROM - 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 - 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a - 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf - 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf - 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a - 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf - - -The tracer may be used to dump the trace for the oops'ing cpu on -a kernel oops into the system log. To enable this, -ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one -can either use the sysctl function or set it via the proc system -interface. - - sysctl kernel.ftrace_dump_on_oops=1 - -or - - echo 1 > /proc/sys/kernel/ftrace_dump_on_oops - - -Here's an example of such a dump after a null pointer -dereference in a kernel module: - -[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 -[57848.106019] IP: [] open+0x6/0x14 [oops] -[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 -[57848.106019] Oops: 0002 [#1] SMP -[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus -[57848.106019] Dumping ftrace buffer: -[57848.106019] --------------------------------- -[...] -[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 -[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 -[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 -[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 -[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 -[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] -[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 -[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b -[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 -[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 -[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 -[...] -[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 -[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 -[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 -[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 -[...] -[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 -[57848.106019] --------------------------------- -[57848.106019] CPU 0 -[57848.106019] Modules linked in: oops -[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 -[57848.106019] RIP: 0010:[] [] open+0x6/0x14 [oops] -[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 -[...] - - -function graph tracer ---------------------------- - -This tracer is similar to the function tracer except that it -probes a function on its entry and its exit. This is done by -using a dynamically allocated stack of return addresses in each -task_struct. On function entry the tracer overwrites the return -address of each function traced to set a custom probe. Thus the -original return address is stored on the stack of return address -in the task_struct. - -Probing on both ends of a function leads to special features -such as: - -- measure of a function's time execution -- having a reliable call stack to draw function calls graph - -This tracer is useful in several situations: - -- you want to find the reason of a strange kernel behavior and - need to see what happens in detail on any areas (or specific - ones). - -- you are experiencing weird latencies but it's difficult to - find its origin. - -- you want to find quickly which path is taken by a specific - function - -- you just want to peek inside a working kernel and want to see - what happens there. - -# tracer: function_graph -# -# CPU DURATION FUNCTION CALLS -# | | | | | | | - - 0) | sys_open() { - 0) | do_sys_open() { - 0) | getname() { - 0) | kmem_cache_alloc() { - 0) 1.382 us | __might_sleep(); - 0) 2.478 us | } - 0) | strncpy_from_user() { - 0) | might_fault() { - 0) 1.389 us | __might_sleep(); - 0) 2.553 us | } - 0) 3.807 us | } - 0) 7.876 us | } - 0) | alloc_fd() { - 0) 0.668 us | _spin_lock(); - 0) 0.570 us | expand_files(); - 0) 0.586 us | _spin_unlock(); - - -There are several columns that can be dynamically -enabled/disabled. You can use every combination of options you -want, depending on your needs. - -- The cpu number on which the function executed is default - enabled. It is sometimes better to only trace one cpu (see - tracing_cpu_mask file) or you might sometimes see unordered - function calls while cpu tracing switch. - - hide: echo nofuncgraph-cpu > /debug/tracing/trace_options - show: echo funcgraph-cpu > /debug/tracing/trace_options - -- The duration (function's time of execution) is displayed on - the closing bracket line of a function or on the same line - than the current function in case of a leaf one. It is default - enabled. - - hide: echo nofuncgraph-duration > /debug/tracing/trace_options - show: echo funcgraph-duration > /debug/tracing/trace_options - -- The overhead field precedes the duration field in case of - reached duration thresholds. - - hide: echo nofuncgraph-overhead > /debug/tracing/trace_options - show: echo funcgraph-overhead > /debug/tracing/trace_options - depends on: funcgraph-duration - - ie: - - 0) | up_write() { - 0) 0.646 us | _spin_lock_irqsave(); - 0) 0.684 us | _spin_unlock_irqrestore(); - 0) 3.123 us | } - 0) 0.548 us | fput(); - 0) + 58.628 us | } - - [...] - - 0) | putname() { - 0) | kmem_cache_free() { - 0) 0.518 us | __phys_addr(); - 0) 1.757 us | } - 0) 2.861 us | } - 0) ! 115.305 us | } - 0) ! 116.402 us | } - - + means that the function exceeded 10 usecs. - ! means that the function exceeded 100 usecs. - - -- The task/pid field displays the thread cmdline and pid which - executed the function. It is default disabled. - - hide: echo nofuncgraph-proc > /debug/tracing/trace_options - show: echo funcgraph-proc > /debug/tracing/trace_options - - ie: - - # tracer: function_graph - # - # CPU TASK/PID DURATION FUNCTION CALLS - # | | | | | | | | | - 0) sh-4802 | | d_free() { - 0) sh-4802 | | call_rcu() { - 0) sh-4802 | | __call_rcu() { - 0) sh-4802 | 0.616 us | rcu_process_gp_end(); - 0) sh-4802 | 0.586 us | check_for_new_grace_period(); - 0) sh-4802 | 2.899 us | } - 0) sh-4802 | 4.040 us | } - 0) sh-4802 | 5.151 us | } - 0) sh-4802 | + 49.370 us | } - - -- The absolute time field is an absolute timestamp given by the - system clock since it started. A snapshot of this time is - given on each entry/exit of functions - - hide: echo nofuncgraph-abstime > /debug/tracing/trace_options - show: echo funcgraph-abstime > /debug/tracing/trace_options - - ie: - - # - # TIME CPU DURATION FUNCTION CALLS - # | | | | | | | | - 360.774522 | 1) 0.541 us | } - 360.774522 | 1) 4.663 us | } - 360.774523 | 1) 0.541 us | __wake_up_bit(); - 360.774524 | 1) 6.796 us | } - 360.774524 | 1) 7.952 us | } - 360.774525 | 1) 9.063 us | } - 360.774525 | 1) 0.615 us | journal_mark_dirty(); - 360.774527 | 1) 0.578 us | __brelse(); - 360.774528 | 1) | reiserfs_prepare_for_journal() { - 360.774528 | 1) | unlock_buffer() { - 360.774529 | 1) | wake_up_bit() { - 360.774529 | 1) | bit_waitqueue() { - 360.774530 | 1) 0.594 us | __phys_addr(); - - -You can put some comments on specific functions by using -trace_printk() For example, if you want to put a comment inside -the __might_sleep() function, you just have to include - and call trace_printk() inside __might_sleep() - -trace_printk("I'm a comment!\n") - -will produce: - - 1) | __might_sleep() { - 1) | /* I'm a comment! */ - 1) 1.449 us | } - - -You might find other useful features for this tracer in the -following "dynamic ftrace" section such as tracing only specific -functions or tasks. - -dynamic ftrace --------------- - -If CONFIG_DYNAMIC_FTRACE is set, the system will run with -virtually no overhead when function tracing is disabled. The way -this works is the mcount function call (placed at the start of -every kernel function, produced by the -pg switch in gcc), -starts of pointing to a simple return. (Enabling FTRACE will -include the -pg switch in the compiling of the kernel.) - -At compile time every C file object is run through the -recordmcount.pl script (located in the scripts directory). This -script will process the C object using objdump to find all the -locations in the .text section that call mcount. (Note, only the -.text section is processed, since processing other sections like -.init.text may cause races due to those sections being freed). - -A new section called "__mcount_loc" is created that holds -references to all the mcount call sites in the .text section. -This section is compiled back into the original object. The -final linker will add all these references into a single table. - -On boot up, before SMP is initialized, the dynamic ftrace code -scans this table and updates all the locations into nops. It -also records the locations, which are added to the -available_filter_functions list. Modules are processed as they -are loaded and before they are executed. When a module is -unloaded, it also removes its functions from the ftrace function -list. This is automatic in the module unload code, and the -module author does not need to worry about it. - -When tracing is enabled, kstop_machine is called to prevent -races with the CPUS executing code being modified (which can -cause the CPU to do undesireable things), and the nops are -patched back to calls. But this time, they do not call mcount -(which is just a function stub). They now call into the ftrace -infrastructure. - -One special side-effect to the recording of the functions being -traced is that we can now selectively choose which functions we -wish to trace and which ones we want the mcount calls to remain -as nops. - -Two files are used, one for enabling and one for disabling the -tracing of specified functions. They are: - - set_ftrace_filter - -and - - set_ftrace_notrace - -A list of available functions that you can add to these files is -listed in: - - available_filter_functions - - # cat /debug/tracing/available_filter_functions -put_prev_task_idle -kmem_cache_create -pick_next_task_rt -get_online_cpus -pick_next_task_fair -mutex_lock -[...] - -If I am only interested in sys_nanosleep and hrtimer_interrupt: - - # echo sys_nanosleep hrtimer_interrupt \ - > /debug/tracing/set_ftrace_filter - # echo ftrace > /debug/tracing/current_tracer - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt - usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call - -0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt - -To see which functions are being traced, you can cat the file: - - # cat /debug/tracing/set_ftrace_filter -hrtimer_interrupt -sys_nanosleep - - -Perhaps this is not enough. The filters also allow simple wild -cards. Only the following are currently available - - * - will match functions that begin with - * - will match functions that end with - ** - will match functions that have in it - -These are the only wild cards which are supported. - - * will not work. - -Note: It is better to use quotes to enclose the wild cards, - otherwise the shell may expand the parameters into names - of files in the local directory. - - # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter - -Produces: - -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4003 [00] 1480.611794: hrtimer_init <-copy_process - bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set - bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear - bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel - -0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt - -0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt - - -Notice that we lost the sys_nanosleep. - - # cat /debug/tracing/set_ftrace_filter -hrtimer_run_queues -hrtimer_run_pending -hrtimer_init -hrtimer_cancel -hrtimer_try_to_cancel -hrtimer_forward -hrtimer_start -hrtimer_reprogram -hrtimer_force_reprogram -hrtimer_get_next_event -hrtimer_interrupt -hrtimer_nanosleep -hrtimer_wakeup -hrtimer_get_remaining -hrtimer_get_res -hrtimer_init_sleeper - - -This is because the '>' and '>>' act just like they do in bash. -To rewrite the filters, use '>' -To append to the filters, use '>>' - -To clear out a filter so that all functions will be recorded -again: - - # echo > /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter - # - -Again, now we want to append. - - # echo sys_nanosleep > /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter -sys_nanosleep - # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter - # cat /debug/tracing/set_ftrace_filter -hrtimer_run_queues -hrtimer_run_pending -hrtimer_init -hrtimer_cancel -hrtimer_try_to_cancel -hrtimer_forward -hrtimer_start -hrtimer_reprogram -hrtimer_force_reprogram -hrtimer_get_next_event -hrtimer_interrupt -sys_nanosleep -hrtimer_nanosleep -hrtimer_wakeup -hrtimer_get_remaining -hrtimer_get_res -hrtimer_init_sleeper - - -The set_ftrace_notrace prevents those functions from being -traced. - - # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace - -Produces: - -# tracer: ftrace -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - bash-4043 [01] 115.281644: finish_task_switch <-schedule - bash-4043 [01] 115.281645: hrtick_set <-schedule - bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set - bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run - bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion - bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run - bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop - bash-4043 [01] 115.281648: wake_up_process <-kthread_stop - bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process - -We can see that there's no more lock or preempt tracing. - - -Dynamic ftrace with the function graph tracer ---------------------------------------------- - -Although what has been explained above concerns both the -function tracer and the function-graph-tracer, there are some -special features only available in the function-graph tracer. - -If you want to trace only one function and all of its children, -you just have to echo its name into set_graph_function: - - echo __do_fault > set_graph_function - -will produce the following "expanded" trace of the __do_fault() -function: - - 0) | __do_fault() { - 0) | filemap_fault() { - 0) | find_lock_page() { - 0) 0.804 us | find_get_page(); - 0) | __might_sleep() { - 0) 1.329 us | } - 0) 3.904 us | } - 0) 4.979 us | } - 0) 0.653 us | _spin_lock(); - 0) 0.578 us | page_add_file_rmap(); - 0) 0.525 us | native_set_pte_at(); - 0) 0.585 us | _spin_unlock(); - 0) | unlock_page() { - 0) 0.541 us | page_waitqueue(); - 0) 0.639 us | __wake_up_bit(); - 0) 2.786 us | } - 0) + 14.237 us | } - 0) | __do_fault() { - 0) | filemap_fault() { - 0) | find_lock_page() { - 0) 0.698 us | find_get_page(); - 0) | __might_sleep() { - 0) 1.412 us | } - 0) 3.950 us | } - 0) 5.098 us | } - 0) 0.631 us | _spin_lock(); - 0) 0.571 us | page_add_file_rmap(); - 0) 0.526 us | native_set_pte_at(); - 0) 0.586 us | _spin_unlock(); - 0) | unlock_page() { - 0) 0.533 us | page_waitqueue(); - 0) 0.638 us | __wake_up_bit(); - 0) 2.793 us | } - 0) + 14.012 us | } - -You can also expand several functions at once: - - echo sys_open > set_graph_function - echo sys_close >> set_graph_function - -Now if you want to go back to trace all functions you can clear -this special filter via: - - echo > set_graph_function - - -trace_pipe ----------- - -The trace_pipe outputs the same content as the trace file, but -the effect on the tracing is different. Every read from -trace_pipe is consumed. This means that subsequent reads will be -different. The trace is live. - - # echo function > /debug/tracing/current_tracer - # cat /debug/tracing/trace_pipe > /tmp/trace.out & -[1] 4153 - # echo 1 > /debug/tracing/tracing_enabled - # usleep 1 - # echo 0 > /debug/tracing/tracing_enabled - # cat /debug/tracing/trace -# tracer: function -# -# TASK-PID CPU# TIMESTAMP FUNCTION -# | | | | | - - # - # cat /tmp/trace.out - bash-4043 [00] 41.267106: finish_task_switch <-schedule - bash-4043 [00] 41.267106: hrtick_set <-schedule - bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set - bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run - bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion - bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run - bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop - bash-4043 [00] 41.267110: wake_up_process <-kthread_stop - bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process - bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up - - -Note, reading the trace_pipe file will block until more input is -added. By changing the tracer, trace_pipe will issue an EOF. We -needed to set the function tracer _before_ we "cat" the -trace_pipe file. - - -trace entries -------------- - -Having too much or not enough data can be troublesome in -diagnosing an issue in the kernel. The file buffer_size_kb is -used to modify the size of the internal trace buffers. The -number listed is the number of entries that can be recorded per -CPU. To know the full size, multiply the number of possible CPUS -with the number of entries. - - # cat /debug/tracing/buffer_size_kb -1408 (units kilobytes) - -Note, to modify this, you must have tracing completely disabled. -To do that, echo "nop" into the current_tracer. If the -current_tracer is not set to "nop", an EINVAL error will be -returned. - - # echo nop > /debug/tracing/current_tracer - # echo 10000 > /debug/tracing/buffer_size_kb - # cat /debug/tracing/buffer_size_kb -10000 (units kilobytes) - -The number of pages which will be allocated is limited to a -percentage of available memory. Allocating too much will produce -an error. - - # echo 1000000000000 > /debug/tracing/buffer_size_kb --bash: echo: write error: Cannot allocate memory - # cat /debug/tracing/buffer_size_kb -85 - ------------ - -More details can be found in the source code, in the -kernel/tracing/*.c files. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt new file mode 100644 index 000000000000..fd9a3e693813 --- /dev/null +++ b/Documentation/trace/ftrace.txt @@ -0,0 +1,1828 @@ + ftrace - Function Tracer + ======================== + +Copyright 2008 Red Hat Inc. + Author: Steven Rostedt + License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) +Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, + John Kacur, and David Teigland. + +Written for: 2.6.28-rc2 + +Introduction +------------ + +Ftrace is an internal tracer designed to help out developers and +designers of systems to find what is going on inside the kernel. +It can be used for debugging or analyzing latencies and +performance issues that take place outside of user-space. + +Although ftrace is the function tracer, it also includes an +infrastructure that allows for other types of tracing. Some of +the tracers that are currently in ftrace include a tracer to +trace context switches, the time it takes for a high priority +task to run after it was woken up, the time interrupts are +disabled, and more (ftrace allows for tracer plugins, which +means that the list of tracers can always grow). + + +The File System +--------------- + +Ftrace uses the debugfs file system to hold the control files as +well as the files to display output. + +To mount the debugfs system: + + # mkdir /debug + # mount -t debugfs nodev /debug + +( Note: it is more common to mount at /sys/kernel/debug, but for + simplicity this document will use /debug) + +That's it! (assuming that you have ftrace configured into your kernel) + +After mounting the debugfs, you can see a directory called +"tracing". This directory contains the control and output files +of ftrace. Here is a list of some of the key files: + + + Note: all time values are in microseconds. + + current_tracer: + + This is used to set or display the current tracer + that is configured. + + available_tracers: + + This holds the different types of tracers that + have been compiled into the kernel. The + tracers listed here can be configured by + echoing their name into current_tracer. + + tracing_enabled: + + This sets or displays whether the current_tracer + is activated and tracing or not. Echo 0 into this + file to disable the tracer or 1 to enable it. + + trace: + + This file holds the output of the trace in a human + readable format (described below). + + latency_trace: + + This file shows the same trace but the information + is organized more to display possible latencies + in the system (described below). + + trace_pipe: + + The output is the same as the "trace" file but this + file is meant to be streamed with live tracing. + Reads from this file will block until new data + is retrieved. Unlike the "trace" and "latency_trace" + files, this file is a consumer. This means reading + from this file causes sequential reads to display + more current data. Once data is read from this + file, it is consumed, and will not be read + again with a sequential read. The "trace" and + "latency_trace" files are static, and if the + tracer is not adding more data, they will display + the same information every time they are read. + + trace_options: + + This file lets the user control the amount of data + that is displayed in one of the above output + files. + + tracing_max_latency: + + Some of the tracers record the max latency. + For example, the time interrupts are disabled. + This time is saved in this file. The max trace + will also be stored, and displayed by either + "trace" or "latency_trace". A new max trace will + only be recorded if the latency is greater than + the value in this file. (in microseconds) + + buffer_size_kb: + + This sets or displays the number of kilobytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + ( Note, the size may not be a multiple of the page size + due to buffer managment overhead. ) + + This can only be updated when the current_tracer + is set to "nop". + + tracing_cpumask: + + This is a mask that lets the user only trace + on specified CPUS. The format is a hex string + representing the CPUS. + + set_ftrace_filter: + + When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: + + This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. + + set_ftrace_pid: + + Have the function tracer only trace a single thread. + + set_graph_function: + + Set a "trigger" function where tracing should start + with the function graph tracer (See the section + "dynamic ftrace" for more details). + + available_filter_functions: + + This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) + + +The Tracers +----------- + +Here is the list of current tracers that may be configured. + + "function" + + Function call tracer to trace all kernel functions. + + "function_graph_tracer" + + Similar to the function tracer except that the + function tracer probes the functions on their entry + whereas the function graph tracer traces on both entry + and exit of the functions. It then provides the ability + to draw a graph of function calls similar to C code + source. + + "sched_switch" + + Traces the context switches and wakeups between tasks. + + "irqsoff" + + Traces the areas that disable interrupts and saves + the trace with the longest max latency. + See tracing_max_latency. When a new max is recorded, + it replaces the old trace. It is best to view this + trace via the latency_trace file. + + "preemptoff" + + Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. + + "preemptirqsoff" + + Similar to irqsoff and preemptoff, but traces and + records the largest time for which irqs and/or preemption + is disabled. + + "wakeup" + + Traces and records the max latency that it takes for + the highest priority task to get scheduled after + it has been woken up. + + "hw-branch-tracer" + + Uses the BTS CPU feature on x86 CPUs to traces all + branches executed. + + "nop" + + This is the "trace nothing" tracer. To remove all + tracers from tracing simply echo "nop" into + current_tracer. + + +Examples of using the tracer +---------------------------- + +Here are typical examples of using the tracers when controlling +them only with the debugfs interface (without using any +user-land utilities). + +Output format: +-------------- + +Here is an example of the output format of the file "trace" + + -------- +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4251 [01] 10152.583854: path_put <-path_walk + bash-4251 [01] 10152.583855: dput <-path_put + bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput + -------- + +A header is printed with the tracer name that is represented by +the trace. In this case the tracer is "function". Then a header +showing the format. Task name "bash", the task PID "4251", the +CPU that it was running on "01", the timestamp in . +format, the function name that was traced "path_put" and the +parent function that called this function "path_walk". The +timestamp is the time at which the function was entered. + +The sched_switch tracer also includes tracing of task wakeups +and context switches. + + ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S + ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S + ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R + events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R + kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R + ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R + +Wake ups are represented by a "+" and the context switches are +shown as "==>". The format is: + + Context switches: + + Previous task Next Task + + :: ==> :: + + Wake ups: + + Current task Task waking up + + :: + :: + +The prio is the internal kernel priority, which is the inverse +of the priority that is usually displayed by user-space tools. +Zero represents the highest priority (99). Prio 100 starts the +"nice" priorities with 100 being equal to nice -20 and 139 being +nice 19. The prio "140" is reserved for the idle task which is +the lowest priority thread (pid 0). + + +Latency trace format +-------------------- + +For traces that display latency times, the latency_trace file +gives somewhat more information to see why a latency happened. +Here is a typical trace. + +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: apic_timer_interrupt + => ended at: do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + -0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt) + -0 0d.s. 97us : __do_softirq (do_softirq) + -0 0d.s1 98us : trace_hardirqs_on (do_softirq) + + +This shows that the current tracer is "irqsoff" tracing the time +for which interrupts were disabled. It gives the trace version +and the version of the kernel upon which this was executed on +(2.6.26-rc8). Then it displays the max latency in microsecs (97 +us). The number of trace entries displayed and the total number +recorded (both are three: #3/3). The type of preemption that was +used (PREEMPT). VP, KP, SP, and HP are always zero and are +reserved for later use. #P is the number of online CPUS (#P:2). + +The task is the process that was running when the latency +occurred. (swapper pid: 0). + +The start and stop (the functions in which the interrupts were +disabled and enabled respectively) that caused the latencies: + + apic_timer_interrupt is where the interrupts were disabled. + do_softirq is where they were enabled again. + +The next lines after the header are the trace itself. The header +explains which is which. + + cmd: The name of the process in the trace. + + pid: The PID of that process. + + CPU#: The CPU which the process was running on. + + irqs-off: 'd' interrupts are disabled. '.' otherwise. + Note: If the architecture does not support a way to + read the irq flags variable, an 'X' will always + be printed here. + + need-resched: 'N' task need_resched is set, '.' otherwise. + + hardirq/softirq: + 'H' - hard irq occurred inside a softirq. + 'h' - hard irq is running + 's' - soft irq is running + '.' - normal context. + + preempt-depth: The level of preempt_disabled + +The above is mostly meaningful for kernel developers. + + time: This differs from the trace file output. The trace file output + includes an absolute timestamp. The timestamp used by the + latency_trace file is relative to the start of the trace. + + delay: This is just to help catch your eye a bit better. And + needs to be fixed to be only relative to the same CPU. + The marks are determined by the difference between this + current trace and the next trace. + '!' - greater than preempt_mark_thresh (default 100) + '+' - greater than 1 microsecond + ' ' - less than or equal to 1 microsecond. + + The rest is the same as the 'trace' file. + + +trace_options +------------- + +The trace_options file is used to control what gets printed in +the trace output. To see what is available, simply cat the file: + + cat /debug/tracing/trace_options + print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ + noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj + +To disable one of the options, echo in the option prepended with +"no". + + echo noprint-parent > /debug/tracing/trace_options + +To enable an option, leave off the "no". + + echo sym-offset > /debug/tracing/trace_options + +Here are the available options: + + print-parent - On function traces, display the calling (parent) + function as well as the function being traced. + + print-parent: + bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul + + noprint-parent: + bash-4000 [01] 1477.606694: simple_strtoul + + + sym-offset - Display not only the function name, but also the + offset in the function. For example, instead of + seeing just "ktime_get", you will see + "ktime_get+0xb/0x20". + + sym-offset: + bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 + + sym-addr - this will also display the function address as well + as the function name. + + sym-addr: + bash-4000 [01] 1477.606694: simple_strtoul + + verbose - This deals with the latency_trace file. + + bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ + (+0.000ms): simple_strtoul (strict_strtoul) + + raw - This will display raw numbers. This option is best for + use with user applications that can translate the raw + numbers better than having it done in the kernel. + + hex - Similar to raw, but the numbers will be in a hexadecimal + format. + + bin - This will print out the formats in raw binary. + + block - TBD (needs update) + + stacktrace - This is one of the options that changes the trace + itself. When a trace is recorded, so is the stack + of functions. This allows for back traces of + trace sites. + + userstacktrace - This option changes the trace. It records a + stacktrace of the current userspace thread. + + sym-userobj - when user stacktrace are enabled, look up which + object the address belongs to, and print a + relative address. This is especially useful when + ASLR is on, otherwise you don't get a chance to + resolve the address to object/file/line after + the app is no longer running + + The lookup is performed when you read + trace,trace_pipe,latency_trace. Example: + + a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0 +x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6] + + sched-tree - trace all tasks that are on the runqueue, at + every scheduling event. Will add overhead if + there's a lot of tasks running at once. + + +sched_switch +------------ + +This tracer simply records schedule switches. Here is an example +of how to use it. + + # echo sched_switch > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # sleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace + +# tracer: sched_switch +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R + bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R + sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R + bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S + bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R + sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R + bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D + bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R + -0 [00] 240.132589: 0:140:R + 4:115:S + -0 [00] 240.132591: 0:140:R ==> 4:115:R + ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R + -0 [00] 240.132598: 0:140:R + 4:115:S + -0 [00] 240.132599: 0:140:R ==> 4:115:R + ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R + sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R + [...] + + +As we have discussed previously about this format, the header +shows the name of the trace and points to the options. The +"FUNCTION" is a misnomer since here it represents the wake ups +and context switches. + +The sched_switch file only lists the wake ups (represented with +'+') and context switches ('==>') with the previous task or +current task first followed by the next task or task waking up. +The format for both of these is PID:KERNEL-PRIO:TASK-STATE. +Remember that the KERNEL-PRIO is the inverse of the actual +priority with zero (0) being the highest priority and the nice +values starting at 100 (nice -20). Below is a quick chart to map +the kernel priority to user land priorities. + + Kernel priority: 0 to 99 ==> user RT priority 99 to 0 + Kernel priority: 100 to 139 ==> user nice -20 to 19 + Kernel priority: 140 ==> idle task priority + +The task states are: + + R - running : wants to run, may not actually be running + S - sleep : process is waiting to be woken up (handles signals) + D - disk sleep (uninterruptible sleep) : process must be woken up + (ignores signals) + T - stopped : process suspended + t - traced : process is being traced (with something like gdb) + Z - zombie : process waiting to be cleaned up + X - unknown + + +ftrace_enabled +-------------- + +The following tracers (listed below) give different output +depending on whether or not the sysctl ftrace_enabled is set. To +set ftrace_enabled, one can either use the sysctl function or +set it via the proc file system interface. + + sysctl kernel.ftrace_enabled=1 + + or + + echo 1 > /proc/sys/kernel/ftrace_enabled + +To disable ftrace_enabled simply replace the '1' with '0' in the +above commands. + +When ftrace_enabled is set the tracers will also record the +functions that are within the trace. The descriptions of the +tracers will also show an example with ftrace enabled. + + +irqsoff +------- + +When interrupts are disabled, the CPU can not react to any other +external event (besides NMIs and SMIs). This prevents the timer +interrupt from triggering or the mouse interrupt from letting +the kernel know of a new mouse event. The result is a latency +with the reaction time. + +The irqsoff tracer tracks the time for which interrupts are +disabled. When a new maximum latency is hit, the tracer saves +the trace leading up to that latency point so that every time a +new maximum is reached, the old saved trace is discarded and the +new trace is saved. + +To reset the maximum, echo 0 into tracing_max_latency. Here is +an example: + + # echo irqsoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26 +-------------------------------------------------------------------- + latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: sys_setpgid + => ended at: sys_setpgid + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) + bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) + bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) + + +Here we see that that we had a latency of 12 microsecs (which is +very good). The _write_lock_irq in sys_setpgid disabled +interrupts. The difference between the 12 and the displayed +timestamp 14us occurred because the clock was incremented +between the time of recording the max latency and the time of +recording the function that had that latency. + +Note the above example had ftrace_enabled not set. If we set the +ftrace_enabled, we get a much larger output: + +# tracer: irqsoff +# +irqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: __alloc_pages_internal + => ended at: __alloc_pages_internal + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal) + ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist) + ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk) + ls-4339 0d..1 4us : add_preempt_count (_spin_lock) + ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue) +[...] + ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk) + ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue) + ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest) + ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk) + ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock) + ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal) + ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) + + + +Here we traced a 50 microsecond latency. But we also see all the +functions that were called during that time. Note that by +enabling function tracing, we incur an added overhead. This +overhead may extend the latency times. But nevertheless, this +trace has provided some very helpful debugging information. + + +preemptoff +---------- + +When preemption is disabled, we may be able to receive +interrupts but the task cannot be preempted and a higher +priority task must wait for preemption to be enabled again +before it can preempt a lower priority task. + +The preemptoff tracer traces the places that disable preemption. +Like the irqsoff tracer, it records the maximum latency for +which preemption was disabled. The control of preemptoff tracer +is much like the irqsoff tracer. + + # echo preemptoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: preemptoff +# +preemptoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: do_IRQ + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + sshd-4261 0d.h. 0us+: irq_enter (do_IRQ) + sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) + + +This has some more changes. Preemption was disabled when an +interrupt came in (notice the 'h'), and was enabled while doing +a softirq. (notice the 's'). But we also see that interrupts +have been disabled when entering the preempt off section and +leaving it (the 'd'). We do not know if interrupts were enabled +in the mean time. + +# tracer: preemptoff +# +preemptoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: remove_wait_queue + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue) + sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue) + sshd-4261 0d..1 2us : do_IRQ (common_interrupt) + sshd-4261 0d..1 2us : irq_enter (do_IRQ) + sshd-4261 0d..1 2us : idle_cpu (irq_enter) + sshd-4261 0d..1 3us : add_preempt_count (irq_enter) + sshd-4261 0d.h1 3us : idle_cpu (irq_enter) + sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ) +[...] + sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock) + sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq) + sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq) + sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock) + sshd-4261 0d.h1 14us : irq_exit (do_IRQ) + sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit) + sshd-4261 0d..2 15us : do_softirq (irq_exit) + sshd-4261 0d... 15us : __do_softirq (do_softirq) + sshd-4261 0d... 16us : __local_bh_disable (__do_softirq) + sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable) +[...] + sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable) + sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable) + sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable) +[...] + sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq) + + +The above is an example of the preemptoff trace with +ftrace_enabled set. Here we see that interrupts were disabled +the entire time. The irq_enter code lets us know that we entered +an interrupt 'h'. Before that, the functions being traced still +show that it is not in an interrupt, but we can see from the +functions themselves that this is not the case. + +Notice that __do_softirq when called does not have a +preempt_count. It may seem that we missed a preempt enabling. +What really happened is that the preempt count is held on the +thread's stack and we switched to the softirq stack (4K stacks +in effect). The code does not copy the preempt count, but +because interrupts are disabled, we do not need to worry about +it. Having a tracer like this is good for letting people know +what really happens inside the kernel. + + +preemptirqsoff +-------------- + +Knowing the locations that have interrupts disabled or +preemption disabled for the longest times is helpful. But +sometimes we would like to know when either preemption and/or +interrupts are disabled. + +Consider the following code: + + local_irq_disable(); + call_function_with_irqs_off(); + preempt_disable(); + call_function_with_irqs_and_preemption_off(); + local_irq_enable(); + call_function_with_preemption_off(); + preempt_enable(); + +The irqsoff tracer will record the total length of +call_function_with_irqs_off() and +call_function_with_irqs_and_preemption_off(). + +The preemptoff tracer will record the total length of +call_function_with_irqs_and_preemption_off() and +call_function_with_preemption_off(). + +But neither will trace the time that interrupts and/or +preemption is disabled. This total time is the time that we can +not schedule. To record this time, use the preemptirqsoff +tracer. + +Again, using this trace is much like the irqsoff and preemptoff +tracers. + + # echo preemptirqsoff > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # ls -ltr + [...] + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: preemptirqsoff +# +preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: apic_timer_interrupt + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt) + ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq) + ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) + + + +The trace_hardirqs_off_thunk is called from assembly on x86 when +interrupts are disabled in the assembly code. Without the +function tracing, we do not know if interrupts were enabled +within the preemption points. We do see that it started with +preemption enabled. + +Here is a trace with ftrace_enabled set: + + +# tracer: preemptirqsoff +# +preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0) + ----------------- + => started at: write_chan + => ended at: __do_softirq + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + ls-4473 0.N.. 0us : preempt_schedule (write_chan) + ls-4473 0dN.1 1us : _spin_lock (schedule) + ls-4473 0dN.1 2us : add_preempt_count (_spin_lock) + ls-4473 0d..2 2us : put_prev_task_fair (schedule) +[...] + ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts) + ls-4473 0d..2 13us : __switch_to (schedule) + sshd-4261 0d..2 14us : finish_task_switch (schedule) + sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch) + sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave) + sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set) + sshd-4261 0d..2 16us : do_IRQ (common_interrupt) + sshd-4261 0d..2 17us : irq_enter (do_IRQ) + sshd-4261 0d..2 17us : idle_cpu (irq_enter) + sshd-4261 0d..2 18us : add_preempt_count (irq_enter) + sshd-4261 0d.h2 18us : idle_cpu (irq_enter) + sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ) + sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq) + sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock) + sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock) +[...] + sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq) + sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock) + sshd-4261 0d.h2 29us : irq_exit (do_IRQ) + sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit) + sshd-4261 0d..3 30us : do_softirq (irq_exit) + sshd-4261 0d... 30us : __do_softirq (do_softirq) + sshd-4261 0d... 31us : __local_bh_disable (__do_softirq) + sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable) + sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable) +[...] + sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip) + sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt) + sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt) + sshd-4261 0d.s3 45us : idle_cpu (irq_enter) + sshd-4261 0d.s3 46us : add_preempt_count (irq_enter) + sshd-4261 0d.H3 46us : idle_cpu (irq_enter) + sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt) + sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt) +[...] + sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt) + sshd-4261 0d.H3 82us : ktime_get (tick_program_event) + sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get) + sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts) + sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts) + sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event) + sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event) + sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt) + sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit) + sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit) + sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable) +[...] + sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action) + sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq) + sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq) + sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable) + sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq) + sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq) + + +This is a very interesting trace. It started with the preemption +of the ls task. We see that the task had the "need_resched" bit +set via the 'N' in the trace. Interrupts were disabled before +the spin_lock at the beginning of the trace. We see that a +schedule took place to run sshd. When the interrupts were +enabled, we took an interrupt. On return from the interrupt +handler, the softirq ran. We took another interrupt while +running the softirq as we see from the capital 'H'. + + +wakeup +------ + +In a Real-Time environment it is very important to know the +wakeup time it takes for the highest priority task that is woken +up to the time that it executes. This is also known as "schedule +latency". I stress the point that this is about RT tasks. It is +also important to know the scheduling latency of non-RT tasks, +but the average schedule latency is better for non-RT tasks. +Tools like LatencyTop are more appropriate for such +measurements. + +Real-Time environments are interested in the worst case latency. +That is the longest latency it takes for something to happen, +and not the average. We can have a very fast scheduler that may +only have a large latency once in a while, but that would not +work well with Real-Time tasks. The wakeup tracer was designed +to record the worst case wakeups of RT tasks. Non-RT tasks are +not recorded because the tracer only records one worst case and +tracing non-RT tasks that are unpredictable will overwrite the +worst case latency of RT tasks. + +Since this tracer only deals with RT tasks, we will run this +slightly differently than we did with the previous tracers. +Instead of performing an 'ls', we will run 'sleep 1' under +'chrt' which changes the priority of the task. + + # echo wakeup > /debug/tracing/current_tracer + # echo 0 > /debug/tracing/tracing_max_latency + # echo 1 > /debug/tracing/tracing_enabled + # chrt -f 5 sleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/latency_trace +# tracer: wakeup +# +wakeup latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5) + ----------------- + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / + -0 1d.h4 0us+: try_to_wake_up (wake_up_process) + -0 1d..4 4us : schedule (cpu_idle) + + +Running this on an idle system, we see that it only took 4 +microseconds to perform the task switch. Note, since the trace +marker in the schedule is before the actual "switch", we stop +the tracing when the recorded task is about to schedule in. This +may change if we add a new marker at the end of the scheduler. + +Notice that the recorded task is 'sleep' with the PID of 4901 +and it has an rt_prio of 5. This priority is user-space priority +and not the internal kernel priority. The policy is 1 for +SCHED_FIFO and 2 for SCHED_RR. + +Doing the same with chrt -r 5 and ftrace_enabled set. + +# tracer: wakeup +# +wakeup latency trace v1.1.5 on 2.6.26-rc8 +-------------------------------------------------------------------- + latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + ----------------- + | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5) + ----------------- + +# _------=> CPU# +# / _-----=> irqs-off +# | / _----=> need-resched +# || / _---=> hardirq/softirq +# ||| / _--=> preempt-depth +# |||| / +# ||||| delay +# cmd pid ||||| time | caller +# \ / ||||| \ | / +ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process) +ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb) +ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up) +ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup) +ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr) +ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup) +ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up) +ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up) +[...] +ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt) +ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit) +ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit) +ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq) +[...] +ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks) +ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq) +ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable) +ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd) +ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd) +ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched) +ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched) +ksoftirq-7 1.N.2 33us : schedule (__cond_resched) +ksoftirq-7 1.N.2 33us : add_preempt_count (schedule) +ksoftirq-7 1.N.3 34us : hrtick_clear (schedule) +ksoftirq-7 1dN.3 35us : _spin_lock (schedule) +ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock) +ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule) +ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair) +[...] +ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline) +ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock) +ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline) +ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) +ksoftirq-7 1d..4 50us : schedule (__cond_resched) + +The interrupt went off while running ksoftirqd. This task runs +at SCHED_OTHER. Why did not we see the 'N' set early? This may +be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K +stacks configured, the interrupt and softirq run with their own +stack. Some information is held on the top of the task's stack +(need_resched and preempt_count are both stored there). The +setting of the NEED_RESCHED bit is done directly to the task's +stack, but the reading of the NEED_RESCHED is done by looking at +the current stack, which in this case is the stack for the hard +interrupt. This hides the fact that NEED_RESCHED has been set. +We do not see the 'N' until we switch back to the task's +assigned stack. + +function +-------- + +This tracer is the function tracer. Enabling the function tracer +can be done from the debug file system. Make sure the +ftrace_enabled is set; otherwise this tracer is a nop. + + # sysctl kernel.ftrace_enabled=1 + # echo function > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4003 [00] 123.638713: finish_task_switch <-schedule + bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch + bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq + bash-4003 [00] 123.638715: hrtick_set <-schedule + bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set + bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave + bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set + bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore + bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set + bash-4003 [00] 123.638718: sub_preempt_count <-schedule + bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule + bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run + bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion + bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common + bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq +[...] + + +Note: function tracer uses ring buffers to store the above +entries. The newest data may overwrite the oldest data. +Sometimes using echo to stop the trace is not sufficient because +the tracing could have overwritten the data that you wanted to +record. For this reason, it is sometimes better to disable +tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are +interested in. To disable the tracing directly from a C program, +something like following code snippet can be used: + +int trace_fd; +[...] +int main(int argc, char *argv[]) { + [...] + trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); + [...] + if (condition_hit()) { + write(trace_fd, "0", 1); + } + [...] +} + +Note: Here we hard coded the path name. The debugfs mount is not +guaranteed to be at /debug (and is more commonly at +/sys/kernel/debug). For simple one time traces, the above is +sufficent. For anything else, a search through /proc/mounts may +be needed to find where the debugfs file-system is mounted. + + +Single thread tracing +--------------------- + +By writing into /debug/tracing/set_ftrace_pid you can trace a +single thread. For example: + +# cat /debug/tracing/set_ftrace_pid +no pid +# echo 3111 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/set_ftrace_pid +3111 +# echo function > /debug/tracing/current_tracer +# cat /debug/tracing/trace | head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return + yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range + yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel + yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel + yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll + yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll +# echo -1 > /debug/tracing/set_ftrace_pid +# cat /debug/tracing/trace |head + # tracer: function + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + ##### CPU 3 buffer started #### + yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait + yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry + yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry + yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit + yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit + +If you want to trace a function when executing, you could use +something like this simple program: + +#include +#include +#include +#include +#include +#include + +int main (int argc, char **argv) +{ + if (argc < 1) + exit(-1); + + if (fork() > 0) { + int fd, ffd; + char line[64]; + int s; + + ffd = open("/debug/tracing/current_tracer", O_WRONLY); + if (ffd < 0) + exit(-1); + write(ffd, "nop", 3); + + fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY); + s = sprintf(line, "%d\n", getpid()); + write(fd, line, s); + + write(ffd, "function", 8); + + close(fd); + close(ffd); + + execvp(argv[1], argv+1); + } + + return 0; +} + + +hw-branch-tracer (x86 only) +--------------------------- + +This tracer uses the x86 last branch tracing hardware feature to +collect a branch trace on all cpus with relatively low overhead. + +The tracer uses a fixed-size circular buffer per cpu and only +traces ring 0 branches. The trace file dumps that buffer in the +following format: + +# tracer: hw-branch-tracer +# +# CPU# TO <- FROM + 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6 + 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a + 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf + 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf + 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a + 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf + + +The tracer may be used to dump the trace for the oops'ing cpu on +a kernel oops into the system log. To enable this, +ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one +can either use the sysctl function or set it via the proc system +interface. + + sysctl kernel.ftrace_dump_on_oops=1 + +or + + echo 1 > /proc/sys/kernel/ftrace_dump_on_oops + + +Here's an example of such a dump after a null pointer +dereference in a kernel module: + +[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 +[57848.106019] IP: [] open+0x6/0x14 [oops] +[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0 +[57848.106019] Oops: 0002 [#1] SMP +[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus +[57848.106019] Dumping ftrace buffer: +[57848.106019] --------------------------------- +[...] +[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24 +[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165 +[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165 +[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165 +[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165 +[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops] +[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30 +[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b +[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31 +[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1 +[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30 +[...] +[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2 +[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881 +[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881 +[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96 +[...] +[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3 +[57848.106019] --------------------------------- +[57848.106019] CPU 0 +[57848.106019] Modules linked in: oops +[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23 +[57848.106019] RIP: 0010:[] [] open+0x6/0x14 [oops] +[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246 +[...] + + +function graph tracer +--------------------------- + +This tracer is similar to the function tracer except that it +probes a function on its entry and its exit. This is done by +using a dynamically allocated stack of return addresses in each +task_struct. On function entry the tracer overwrites the return +address of each function traced to set a custom probe. Thus the +original return address is stored on the stack of return address +in the task_struct. + +Probing on both ends of a function leads to special features +such as: + +- measure of a function's time execution +- having a reliable call stack to draw function calls graph + +This tracer is useful in several situations: + +- you want to find the reason of a strange kernel behavior and + need to see what happens in detail on any areas (or specific + ones). + +- you are experiencing weird latencies but it's difficult to + find its origin. + +- you want to find quickly which path is taken by a specific + function + +- you just want to peek inside a working kernel and want to see + what happens there. + +# tracer: function_graph +# +# CPU DURATION FUNCTION CALLS +# | | | | | | | + + 0) | sys_open() { + 0) | do_sys_open() { + 0) | getname() { + 0) | kmem_cache_alloc() { + 0) 1.382 us | __might_sleep(); + 0) 2.478 us | } + 0) | strncpy_from_user() { + 0) | might_fault() { + 0) 1.389 us | __might_sleep(); + 0) 2.553 us | } + 0) 3.807 us | } + 0) 7.876 us | } + 0) | alloc_fd() { + 0) 0.668 us | _spin_lock(); + 0) 0.570 us | expand_files(); + 0) 0.586 us | _spin_unlock(); + + +There are several columns that can be dynamically +enabled/disabled. You can use every combination of options you +want, depending on your needs. + +- The cpu number on which the function executed is default + enabled. It is sometimes better to only trace one cpu (see + tracing_cpu_mask file) or you might sometimes see unordered + function calls while cpu tracing switch. + + hide: echo nofuncgraph-cpu > /debug/tracing/trace_options + show: echo funcgraph-cpu > /debug/tracing/trace_options + +- The duration (function's time of execution) is displayed on + the closing bracket line of a function or on the same line + than the current function in case of a leaf one. It is default + enabled. + + hide: echo nofuncgraph-duration > /debug/tracing/trace_options + show: echo funcgraph-duration > /debug/tracing/trace_options + +- The overhead field precedes the duration field in case of + reached duration thresholds. + + hide: echo nofuncgraph-overhead > /debug/tracing/trace_options + show: echo funcgraph-overhead > /debug/tracing/trace_options + depends on: funcgraph-duration + + ie: + + 0) | up_write() { + 0) 0.646 us | _spin_lock_irqsave(); + 0) 0.684 us | _spin_unlock_irqrestore(); + 0) 3.123 us | } + 0) 0.548 us | fput(); + 0) + 58.628 us | } + + [...] + + 0) | putname() { + 0) | kmem_cache_free() { + 0) 0.518 us | __phys_addr(); + 0) 1.757 us | } + 0) 2.861 us | } + 0) ! 115.305 us | } + 0) ! 116.402 us | } + + + means that the function exceeded 10 usecs. + ! means that the function exceeded 100 usecs. + + +- The task/pid field displays the thread cmdline and pid which + executed the function. It is default disabled. + + hide: echo nofuncgraph-proc > /debug/tracing/trace_options + show: echo funcgraph-proc > /debug/tracing/trace_options + + ie: + + # tracer: function_graph + # + # CPU TASK/PID DURATION FUNCTION CALLS + # | | | | | | | | | + 0) sh-4802 | | d_free() { + 0) sh-4802 | | call_rcu() { + 0) sh-4802 | | __call_rcu() { + 0) sh-4802 | 0.616 us | rcu_process_gp_end(); + 0) sh-4802 | 0.586 us | check_for_new_grace_period(); + 0) sh-4802 | 2.899 us | } + 0) sh-4802 | 4.040 us | } + 0) sh-4802 | 5.151 us | } + 0) sh-4802 | + 49.370 us | } + + +- The absolute time field is an absolute timestamp given by the + system clock since it started. A snapshot of this time is + given on each entry/exit of functions + + hide: echo nofuncgraph-abstime > /debug/tracing/trace_options + show: echo funcgraph-abstime > /debug/tracing/trace_options + + ie: + + # + # TIME CPU DURATION FUNCTION CALLS + # | | | | | | | | + 360.774522 | 1) 0.541 us | } + 360.774522 | 1) 4.663 us | } + 360.774523 | 1) 0.541 us | __wake_up_bit(); + 360.774524 | 1) 6.796 us | } + 360.774524 | 1) 7.952 us | } + 360.774525 | 1) 9.063 us | } + 360.774525 | 1) 0.615 us | journal_mark_dirty(); + 360.774527 | 1) 0.578 us | __brelse(); + 360.774528 | 1) | reiserfs_prepare_for_journal() { + 360.774528 | 1) | unlock_buffer() { + 360.774529 | 1) | wake_up_bit() { + 360.774529 | 1) | bit_waitqueue() { + 360.774530 | 1) 0.594 us | __phys_addr(); + + +You can put some comments on specific functions by using +trace_printk() For example, if you want to put a comment inside +the __might_sleep() function, you just have to include + and call trace_printk() inside __might_sleep() + +trace_printk("I'm a comment!\n") + +will produce: + + 1) | __might_sleep() { + 1) | /* I'm a comment! */ + 1) 1.449 us | } + + +You might find other useful features for this tracer in the +following "dynamic ftrace" section such as tracing only specific +functions or tasks. + +dynamic ftrace +-------------- + +If CONFIG_DYNAMIC_FTRACE is set, the system will run with +virtually no overhead when function tracing is disabled. The way +this works is the mcount function call (placed at the start of +every kernel function, produced by the -pg switch in gcc), +starts of pointing to a simple return. (Enabling FTRACE will +include the -pg switch in the compiling of the kernel.) + +At compile time every C file object is run through the +recordmcount.pl script (located in the scripts directory). This +script will process the C object using objdump to find all the +locations in the .text section that call mcount. (Note, only the +.text section is processed, since processing other sections like +.init.text may cause races due to those sections being freed). + +A new section called "__mcount_loc" is created that holds +references to all the mcount call sites in the .text section. +This section is compiled back into the original object. The +final linker will add all these references into a single table. + +On boot up, before SMP is initialized, the dynamic ftrace code +scans this table and updates all the locations into nops. It +also records the locations, which are added to the +available_filter_functions list. Modules are processed as they +are loaded and before they are executed. When a module is +unloaded, it also removes its functions from the ftrace function +list. This is automatic in the module unload code, and the +module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent +races with the CPUS executing code being modified (which can +cause the CPU to do undesireable things), and the nops are +patched back to calls. But this time, they do not call mcount +(which is just a function stub). They now call into the ftrace +infrastructure. + +One special side-effect to the recording of the functions being +traced is that we can now selectively choose which functions we +wish to trace and which ones we want the mcount calls to remain +as nops. + +Two files are used, one for enabling and one for disabling the +tracing of specified functions. They are: + + set_ftrace_filter + +and + + set_ftrace_notrace + +A list of available functions that you can add to these files is +listed in: + + available_filter_functions + + # cat /debug/tracing/available_filter_functions +put_prev_task_idle +kmem_cache_create +pick_next_task_rt +get_online_cpus +pick_next_task_fair +mutex_lock +[...] + +If I am only interested in sys_nanosleep and hrtimer_interrupt: + + # echo sys_nanosleep hrtimer_interrupt \ + > /debug/tracing/set_ftrace_filter + # echo ftrace > /debug/tracing/current_tracer + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt + usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call + -0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt + +To see which functions are being traced, you can cat the file: + + # cat /debug/tracing/set_ftrace_filter +hrtimer_interrupt +sys_nanosleep + + +Perhaps this is not enough. The filters also allow simple wild +cards. Only the following are currently available + + * - will match functions that begin with + * - will match functions that end with + ** - will match functions that have in it + +These are the only wild cards which are supported. + + * will not work. + +Note: It is better to use quotes to enclose the wild cards, + otherwise the shell may expand the parameters into names + of files in the local directory. + + # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter + +Produces: + +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4003 [00] 1480.611794: hrtimer_init <-copy_process + bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set + bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear + bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel + -0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt + -0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt + + +Notice that we lost the sys_nanosleep. + + # cat /debug/tracing/set_ftrace_filter +hrtimer_run_queues +hrtimer_run_pending +hrtimer_init +hrtimer_cancel +hrtimer_try_to_cancel +hrtimer_forward +hrtimer_start +hrtimer_reprogram +hrtimer_force_reprogram +hrtimer_get_next_event +hrtimer_interrupt +hrtimer_nanosleep +hrtimer_wakeup +hrtimer_get_remaining +hrtimer_get_res +hrtimer_init_sleeper + + +This is because the '>' and '>>' act just like they do in bash. +To rewrite the filters, use '>' +To append to the filters, use '>>' + +To clear out a filter so that all functions will be recorded +again: + + # echo > /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter + # + +Again, now we want to append. + + # echo sys_nanosleep > /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter +sys_nanosleep + # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter + # cat /debug/tracing/set_ftrace_filter +hrtimer_run_queues +hrtimer_run_pending +hrtimer_init +hrtimer_cancel +hrtimer_try_to_cancel +hrtimer_forward +hrtimer_start +hrtimer_reprogram +hrtimer_force_reprogram +hrtimer_get_next_event +hrtimer_interrupt +sys_nanosleep +hrtimer_nanosleep +hrtimer_wakeup +hrtimer_get_remaining +hrtimer_get_res +hrtimer_init_sleeper + + +The set_ftrace_notrace prevents those functions from being +traced. + + # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace + +Produces: + +# tracer: ftrace +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + bash-4043 [01] 115.281644: finish_task_switch <-schedule + bash-4043 [01] 115.281645: hrtick_set <-schedule + bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set + bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run + bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion + bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run + bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop + bash-4043 [01] 115.281648: wake_up_process <-kthread_stop + bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process + +We can see that there's no more lock or preempt tracing. + + +Dynamic ftrace with the function graph tracer +--------------------------------------------- + +Although what has been explained above concerns both the +function tracer and the function-graph-tracer, there are some +special features only available in the function-graph tracer. + +If you want to trace only one function and all of its children, +you just have to echo its name into set_graph_function: + + echo __do_fault > set_graph_function + +will produce the following "expanded" trace of the __do_fault() +function: + + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.804 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.329 us | } + 0) 3.904 us | } + 0) 4.979 us | } + 0) 0.653 us | _spin_lock(); + 0) 0.578 us | page_add_file_rmap(); + 0) 0.525 us | native_set_pte_at(); + 0) 0.585 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.541 us | page_waitqueue(); + 0) 0.639 us | __wake_up_bit(); + 0) 2.786 us | } + 0) + 14.237 us | } + 0) | __do_fault() { + 0) | filemap_fault() { + 0) | find_lock_page() { + 0) 0.698 us | find_get_page(); + 0) | __might_sleep() { + 0) 1.412 us | } + 0) 3.950 us | } + 0) 5.098 us | } + 0) 0.631 us | _spin_lock(); + 0) 0.571 us | page_add_file_rmap(); + 0) 0.526 us | native_set_pte_at(); + 0) 0.586 us | _spin_unlock(); + 0) | unlock_page() { + 0) 0.533 us | page_waitqueue(); + 0) 0.638 us | __wake_up_bit(); + 0) 2.793 us | } + 0) + 14.012 us | } + +You can also expand several functions at once: + + echo sys_open > set_graph_function + echo sys_close >> set_graph_function + +Now if you want to go back to trace all functions you can clear +this special filter via: + + echo > set_graph_function + + +trace_pipe +---------- + +The trace_pipe outputs the same content as the trace file, but +the effect on the tracing is different. Every read from +trace_pipe is consumed. This means that subsequent reads will be +different. The trace is live. + + # echo function > /debug/tracing/current_tracer + # cat /debug/tracing/trace_pipe > /tmp/trace.out & +[1] 4153 + # echo 1 > /debug/tracing/tracing_enabled + # usleep 1 + # echo 0 > /debug/tracing/tracing_enabled + # cat /debug/tracing/trace +# tracer: function +# +# TASK-PID CPU# TIMESTAMP FUNCTION +# | | | | | + + # + # cat /tmp/trace.out + bash-4043 [00] 41.267106: finish_task_switch <-schedule + bash-4043 [00] 41.267106: hrtick_set <-schedule + bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set + bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run + bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion + bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run + bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop + bash-4043 [00] 41.267110: wake_up_process <-kthread_stop + bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process + bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up + + +Note, reading the trace_pipe file will block until more input is +added. By changing the tracer, trace_pipe will issue an EOF. We +needed to set the function tracer _before_ we "cat" the +trace_pipe file. + + +trace entries +------------- + +Having too much or not enough data can be troublesome in +diagnosing an issue in the kernel. The file buffer_size_kb is +used to modify the size of the internal trace buffers. The +number listed is the number of entries that can be recorded per +CPU. To know the full size, multiply the number of possible CPUS +with the number of entries. + + # cat /debug/tracing/buffer_size_kb +1408 (units kilobytes) + +Note, to modify this, you must have tracing completely disabled. +To do that, echo "nop" into the current_tracer. If the +current_tracer is not set to "nop", an EINVAL error will be +returned. + + # echo nop > /debug/tracing/current_tracer + # echo 10000 > /debug/tracing/buffer_size_kb + # cat /debug/tracing/buffer_size_kb +10000 (units kilobytes) + +The number of pages which will be allocated is limited to a +percentage of available memory. Allocating too much will produce +an error. + + # echo 1000000000000 > /debug/tracing/buffer_size_kb +-bash: echo: write error: Cannot allocate memory + # cat /debug/tracing/buffer_size_kb +85 + +----------- + +More details can be found in the source code, in the +kernel/tracing/*.c files. diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt new file mode 100644 index 000000000000..a956d9b7f943 --- /dev/null +++ b/Documentation/trace/kmemtrace.txt @@ -0,0 +1,126 @@ + kmemtrace - Kernel Memory Tracer + + by Eduard - Gabriel Munteanu + + +I. Introduction +=============== + +kmemtrace helps kernel developers figure out two things: +1) how different allocators (SLAB, SLUB etc.) perform +2) how kernel code allocates memory and how much + +To do this, we trace every allocation and export information to the userspace +through the relay interface. We export things such as the number of requested +bytes, the number of bytes actually allocated (i.e. including internal +fragmentation), whether this is a slab allocation or a plain kmalloc() and so +on. + +The actual analysis is performed by a userspace tool (see section III for +details on where to get it from). It logs the data exported by the kernel, +processes it and (as of writing this) can provide the following information: +- the total amount of memory allocated and fragmentation per call-site +- the amount of memory allocated and fragmentation per allocation +- total memory allocated and fragmentation in the collected dataset +- number of cross-CPU allocation and frees (makes sense in NUMA environments) + +Moreover, it can potentially find inconsistent and erroneous behavior in +kernel code, such as using slab free functions on kmalloc'ed memory or +allocating less memory than requested (but not truly failed allocations). + +kmemtrace also makes provisions for tracing on some arch and analysing the +data on another. + +II. Design and goals +==================== + +kmemtrace was designed to handle rather large amounts of data. Thus, it uses +the relay interface to export whatever is logged to userspace, which then +stores it. Analysis and reporting is done asynchronously, that is, after the +data is collected and stored. By design, it allows one to log and analyse +on different machines and different arches. + +As of writing this, the ABI is not considered stable, though it might not +change much. However, no guarantees are made about compatibility yet. When +deemed stable, the ABI should still allow easy extension while maintaining +backward compatibility. This is described further in Documentation/ABI. + +Summary of design goals: + - allow logging and analysis to be done across different machines + - be fast and anticipate usage in high-load environments (*) + - be reasonably extensible + - make it possible for GNU/Linux distributions to have kmemtrace + included in their repositories + +(*) - one of the reasons Pekka Enberg's original userspace data analysis + tool's code was rewritten from Perl to C (although this is more than a + simple conversion) + + +III. Quick usage guide +====================== + +1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable +CONFIG_KMEMTRACE). + +2) Get the userspace tool and build it: +$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository +$ cd kmemtrace-user/ +$ ./autogen.sh +$ ./configure +$ make + +3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the +'single' runlevel (so that relay buffers don't fill up easily), and run +kmemtrace: +# '$' does not mean user, but root here. +$ mount -t debugfs none /sys/kernel/debug +$ mount -t proc none /proc +$ cd path/to/kmemtrace-user/ +$ ./kmemtraced +Wait a bit, then stop it with CTRL+C. +$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't + # overrun, should + # be zero. +$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to + check its correctness] +$ ./kmemtrace-report + +Now you should have a nice and short summary of how the allocator performs. + +IV. FAQ and known issues +======================== + +Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix +this? Should I worry? +A: If it's non-zero, this affects kmemtrace's accuracy, depending on how +large the number is. You can fix it by supplying a higher +'kmemtrace.subbufs=N' kernel parameter. +--- + +Q: kmemtrace_check reports errors, how do I fix this? Should I worry? +A: This is a bug and should be reported. It can occur for a variety of +reasons: + - possible bugs in relay code + - possible misuse of relay by kmemtrace + - timestamps being collected unorderly +Or you may fix it yourself and send us a patch. +--- + +Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? +A: This is a known issue and I'm working on it. These might be true errors +in kernel code, which may have inconsistent behavior (e.g. allocating memory +with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed +out this behavior may work with SLAB, but may fail with other allocators. + +It may also be due to lack of tracing in some unusual allocator functions. + +We don't want bug reports regarding this issue yet. +--- + +V. See also +=========== + +Documentation/kernel-parameters.txt +Documentation/ABI/testing/debugfs-kmemtrace + diff --git a/Documentation/trace/mmiotrace.txt b/Documentation/trace/mmiotrace.txt new file mode 100644 index 000000000000..5731c67abc55 --- /dev/null +++ b/Documentation/trace/mmiotrace.txt @@ -0,0 +1,163 @@ + In-kernel memory-mapped I/O tracing + + +Home page and links to optional user space tools: + + http://nouveau.freedesktop.org/wiki/MmioTrace + +MMIO tracing was originally developed by Intel around 2003 for their Fault +Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, +Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau +project in mind. Since then many people have contributed. + +Mmiotrace was built for reverse engineering any memory-mapped IO device with +the Nouveau project as the first real user. Only x86 and x86_64 architectures +are supported. + +Out-of-tree mmiotrace was originally modified for mainline inclusion and +ftrace framework by Pekka Paalanen . + + +Preparation +----------- + +Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is +disabled by default, so it is safe to have this set to yes. SMP systems are +supported, but tracing is unreliable and may miss events if more than one CPU +is on-line, therefore mmiotrace takes all but one CPU off-line during run-time +activation. You can re-enable CPUs by hand, but you have been warned, there +is no way to automatically detect if you are losing events due to CPUs racing. + + +Usage Quick Reference +--------------------- + +$ mount -t debugfs debugfs /debug +$ echo mmiotrace > /debug/tracing/current_tracer +$ cat /debug/tracing/trace_pipe > mydump.txt & +Start X or whatever. +$ echo "X is up" > /debug/tracing/trace_marker +$ echo nop > /debug/tracing/current_tracer +Check for lost events. + + +Usage +----- + +Make sure debugfs is mounted to /debug. If not, (requires root privileges) +$ mount -t debugfs debugfs /debug + +Check that the driver you are about to trace is not loaded. + +Activate mmiotrace (requires root privileges): +$ echo mmiotrace > /debug/tracing/current_tracer + +Start storing the trace: +$ cat /debug/tracing/trace_pipe > mydump.txt & +The 'cat' process should stay running (sleeping) in the background. + +Load the driver you want to trace and use it. Mmiotrace will only catch MMIO +accesses to areas that are ioremapped while mmiotrace is active. + +During tracing you can place comments (markers) into the trace by +$ echo "X is up" > /debug/tracing/trace_marker +This makes it easier to see which part of the (huge) trace corresponds to +which action. It is recommended to place descriptive markers about what you +do. + +Shut down mmiotrace (requires root privileges): +$ echo nop > /debug/tracing/current_tracer +The 'cat' process exits. If it does not, kill it by issuing 'fg' command and +pressing ctrl+c. + +Check that mmiotrace did not lose events due to a buffer filling up. Either +$ grep -i lost mydump.txt +which tells you exactly how many events were lost, or use +$ dmesg +to view your kernel log and look for "mmiotrace has lost events" warning. If +events were lost, the trace is incomplete. You should enlarge the buffers and +try again. Buffers are enlarged by first seeing how large the current buffers +are: +$ cat /debug/tracing/buffer_size_kb +gives you a number. Approximately double this number and write it back, for +instance: +$ echo 128000 > /debug/tracing/buffer_size_kb +Then start again from the top. + +If you are doing a trace for a driver project, e.g. Nouveau, you should also +do the following before sending your results: +$ lspci -vvv > lspci.txt +$ dmesg > dmesg.txt +$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt +and then send the .tar.gz file. The trace compresses considerably. Replace +"pciid" and "nick" with the PCI ID or model name of your piece of hardware +under investigation and your nick name. + + +How Mmiotrace Works +------------------- + +Access to hardware IO-memory is gained by mapping addresses from PCI bus by +calling one of the ioremap_*() functions. Mmiotrace is hooked into the +__ioremap() function and gets called whenever a mapping is created. Mapping is +an event that is recorded into the trace log. Note, that ISA range mappings +are not caught, since the mapping always exists and is returned directly. + +MMIO accesses are recorded via page faults. Just before __ioremap() returns, +the mapped pages are marked as not present. Any access to the pages causes a +fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace +marks the page present, sets TF flag to achieve single stepping and exits the +fault handler. The instruction that faulted is executed and debug trap is +entered. Here mmiotrace again marks the page as not present. The instruction +is decoded to get the type of operation (read/write), data width and the value +read or written. These are stored to the trace log. + +Setting the page present in the page fault handler has a race condition on SMP +machines. During the single stepping other CPUs may run freely on that page +and events can be missed without a notice. Re-enabling other CPUs during +tracing is discouraged. + + +Trace Log Format +---------------- + +The raw log is text and easily filtered with e.g. grep and awk. One record is +one line in the log. A record starts with a keyword, followed by keyword +dependant arguments. Arguments are separated by a space, or continue until the +end of line. The format for version 20070824 is as follows: + +Explanation Keyword Space separated arguments +--------------------------------------------------------------------------- + +read event R width, timestamp, map id, physical, value, PC, PID +write event W width, timestamp, map id, physical, value, PC, PID +ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID +iounmap event UNMAP timestamp, map id, PC, PID +marker MARK timestamp, text +version VERSION the string "20070824" +info for reader LSPCI one line from lspci -v +PCI address map PCIDEV space separated /proc/bus/pci/devices data +unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID + +Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual +is a kernel virtual address. Width is the data width in bytes and value is the +data value. Map id is an arbitrary id number identifying the mapping that was +used in an operation. PC is the program counter and PID is process id. PC is +zero if it is not recorded. PID is always zero as tracing MMIO accesses +originating in user space memory is not yet supported. + +For instance, the following awk filter will pass all 32-bit writes that target +physical addresses in the range [0xfb73ce40, 0xfb800000[ + +$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && +adr < 0xfb800000) print; }' + + +Tools for Developers +-------------------- + +The user space tools include utilities for: +- replacing numeric addresses and values with hardware register names +- replaying MMIO logs, i.e., re-executing the recorded writes + + diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt new file mode 100644 index 000000000000..c0e1ceed75a4 --- /dev/null +++ b/Documentation/trace/tracepoints.txt @@ -0,0 +1,116 @@ + Using the Linux Kernel Tracepoints + + Mathieu Desnoyers + + +This document introduces Linux Kernel Tracepoints and their use. It +provides examples of how to insert tracepoints in the kernel and +connect probe functions to them and provides some examples of probe +functions. + + +* Purpose of tracepoints + +A tracepoint placed in code provides a hook to call a function (probe) +that you can provide at runtime. A tracepoint can be "on" (a probe is +connected to it) or "off" (no probe is attached). When a tracepoint is +"off" it has no effect, except for adding a tiny time penalty +(checking a condition for a branch) and space penalty (adding a few +bytes for the function call at the end of the instrumented function +and adds a data structure in a separate section). When a tracepoint +is "on", the function you provide is called each time the tracepoint +is executed, in the execution context of the caller. When the function +provided ends its execution, it returns to the caller (continuing from +the tracepoint site). + +You can put tracepoints at important locations in the code. They are +lightweight hooks that can pass an arbitrary number of parameters, +which prototypes are described in a tracepoint declaration placed in a +header file. + +They can be used for tracing and performance accounting. + + +* Usage + +Two elements are required for tracepoints : + +- A tracepoint definition, placed in a header file. +- The tracepoint statement, in C code. + +In order to use tracepoints, you should include linux/tracepoint.h. + +In include/trace/subsys.h : + +#include + +DECLARE_TRACE(subsys_eventname, + TP_PROTO(int firstarg, struct task_struct *p), + TP_ARGS(firstarg, p)); + +In subsys/file.c (where the tracing statement must be added) : + +#include + +DEFINE_TRACE(subsys_eventname); + +void somefct(void) +{ + ... + trace_subsys_eventname(arg, task); + ... +} + +Where : +- subsys_eventname is an identifier unique to your event + - subsys is the name of your subsystem. + - eventname is the name of the event to trace. + +- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the + function called by this tracepoint. + +- TP_ARGS(firstarg, p) are the parameters names, same as found in the + prototype. + +Connecting a function (probe) to a tracepoint is done by providing a +probe (function to call) for the specific tracepoint through +register_trace_subsys_eventname(). Removing a probe is done through +unregister_trace_subsys_eventname(); it will remove the probe. + +tracepoint_synchronize_unregister() must be called before the end of +the module exit function to make sure there is no caller left using +the probe. This, and the fact that preemption is disabled around the +probe call, make sure that probe removal and module unload are safe. +See the "Probe example" section below for a sample probe module. + +The tracepoint mechanism supports inserting multiple instances of the +same tracepoint, but a single definition must be made of a given +tracepoint name over all the kernel to make sure no type conflict will +occur. Name mangling of the tracepoints is done using the prototypes +to make sure typing is correct. Verification of probe type correctness +is done at the registration site by the compiler. Tracepoints can be +put in inline functions, inlined static functions, and unrolled loops +as well as regular functions. + +The naming scheme "subsys_event" is suggested here as a convention +intended to limit collisions. Tracepoint names are global to the +kernel: they are considered as being the same whether they are in the +core kernel image or in modules. + +If the tracepoint has to be used in kernel modules, an +EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be +used to export the defined tracepoints. + +* Probe / tracepoint example + +See the example provided in samples/tracepoints + +Compile them with your kernel. They are built during 'make' (not +'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. + +Run, as root : +modprobe tracepoint-sample (insmod order is not important) +modprobe tracepoint-probe-sample +cat /proc/tracepoint-sample (returns an expected error) +rmmod tracepoint-sample tracepoint-probe-sample +dmesg diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt deleted file mode 100644 index c0e1ceed75a4..000000000000 --- a/Documentation/tracepoints.txt +++ /dev/null @@ -1,116 +0,0 @@ - Using the Linux Kernel Tracepoints - - Mathieu Desnoyers - - -This document introduces Linux Kernel Tracepoints and their use. It -provides examples of how to insert tracepoints in the kernel and -connect probe functions to them and provides some examples of probe -functions. - - -* Purpose of tracepoints - -A tracepoint placed in code provides a hook to call a function (probe) -that you can provide at runtime. A tracepoint can be "on" (a probe is -connected to it) or "off" (no probe is attached). When a tracepoint is -"off" it has no effect, except for adding a tiny time penalty -(checking a condition for a branch) and space penalty (adding a few -bytes for the function call at the end of the instrumented function -and adds a data structure in a separate section). When a tracepoint -is "on", the function you provide is called each time the tracepoint -is executed, in the execution context of the caller. When the function -provided ends its execution, it returns to the caller (continuing from -the tracepoint site). - -You can put tracepoints at important locations in the code. They are -lightweight hooks that can pass an arbitrary number of parameters, -which prototypes are described in a tracepoint declaration placed in a -header file. - -They can be used for tracing and performance accounting. - - -* Usage - -Two elements are required for tracepoints : - -- A tracepoint definition, placed in a header file. -- The tracepoint statement, in C code. - -In order to use tracepoints, you should include linux/tracepoint.h. - -In include/trace/subsys.h : - -#include - -DECLARE_TRACE(subsys_eventname, - TP_PROTO(int firstarg, struct task_struct *p), - TP_ARGS(firstarg, p)); - -In subsys/file.c (where the tracing statement must be added) : - -#include - -DEFINE_TRACE(subsys_eventname); - -void somefct(void) -{ - ... - trace_subsys_eventname(arg, task); - ... -} - -Where : -- subsys_eventname is an identifier unique to your event - - subsys is the name of your subsystem. - - eventname is the name of the event to trace. - -- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the - function called by this tracepoint. - -- TP_ARGS(firstarg, p) are the parameters names, same as found in the - prototype. - -Connecting a function (probe) to a tracepoint is done by providing a -probe (function to call) for the specific tracepoint through -register_trace_subsys_eventname(). Removing a probe is done through -unregister_trace_subsys_eventname(); it will remove the probe. - -tracepoint_synchronize_unregister() must be called before the end of -the module exit function to make sure there is no caller left using -the probe. This, and the fact that preemption is disabled around the -probe call, make sure that probe removal and module unload are safe. -See the "Probe example" section below for a sample probe module. - -The tracepoint mechanism supports inserting multiple instances of the -same tracepoint, but a single definition must be made of a given -tracepoint name over all the kernel to make sure no type conflict will -occur. Name mangling of the tracepoints is done using the prototypes -to make sure typing is correct. Verification of probe type correctness -is done at the registration site by the compiler. Tracepoints can be -put in inline functions, inlined static functions, and unrolled loops -as well as regular functions. - -The naming scheme "subsys_event" is suggested here as a convention -intended to limit collisions. Tracepoint names are global to the -kernel: they are considered as being the same whether they are in the -core kernel image or in modules. - -If the tracepoint has to be used in kernel modules, an -EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be -used to export the defined tracepoints. - -* Probe / tracepoint example - -See the example provided in samples/tracepoints - -Compile them with your kernel. They are built during 'make' (not -'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m. - -Run, as root : -modprobe tracepoint-sample (insmod order is not important) -modprobe tracepoint-probe-sample -cat /proc/tracepoint-sample (returns an expected error) -rmmod tracepoint-sample tracepoint-probe-sample -dmesg diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt deleted file mode 100644 index 5731c67abc55..000000000000 --- a/Documentation/tracers/mmiotrace.txt +++ /dev/null @@ -1,163 +0,0 @@ - In-kernel memory-mapped I/O tracing - - -Home page and links to optional user space tools: - - http://nouveau.freedesktop.org/wiki/MmioTrace - -MMIO tracing was originally developed by Intel around 2003 for their Fault -Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, -Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau -project in mind. Since then many people have contributed. - -Mmiotrace was built for reverse engineering any memory-mapped IO device with -the Nouveau project as the first real user. Only x86 and x86_64 architectures -are supported. - -Out-of-tree mmiotrace was originally modified for mainline inclusion and -ftrace framework by Pekka Paalanen . - - -Preparation ------------ - -Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is -disabled by default, so it is safe to have this set to yes. SMP systems are -supported, but tracing is unreliable and may miss events if more than one CPU -is on-line, therefore mmiotrace takes all but one CPU off-line during run-time -activation. You can re-enable CPUs by hand, but you have been warned, there -is no way to automatically detect if you are losing events due to CPUs racing. - - -Usage Quick Reference ---------------------- - -$ mount -t debugfs debugfs /debug -$ echo mmiotrace > /debug/tracing/current_tracer -$ cat /debug/tracing/trace_pipe > mydump.txt & -Start X or whatever. -$ echo "X is up" > /debug/tracing/trace_marker -$ echo nop > /debug/tracing/current_tracer -Check for lost events. - - -Usage ------ - -Make sure debugfs is mounted to /debug. If not, (requires root privileges) -$ mount -t debugfs debugfs /debug - -Check that the driver you are about to trace is not loaded. - -Activate mmiotrace (requires root privileges): -$ echo mmiotrace > /debug/tracing/current_tracer - -Start storing the trace: -$ cat /debug/tracing/trace_pipe > mydump.txt & -The 'cat' process should stay running (sleeping) in the background. - -Load the driver you want to trace and use it. Mmiotrace will only catch MMIO -accesses to areas that are ioremapped while mmiotrace is active. - -During tracing you can place comments (markers) into the trace by -$ echo "X is up" > /debug/tracing/trace_marker -This makes it easier to see which part of the (huge) trace corresponds to -which action. It is recommended to place descriptive markers about what you -do. - -Shut down mmiotrace (requires root privileges): -$ echo nop > /debug/tracing/current_tracer -The 'cat' process exits. If it does not, kill it by issuing 'fg' command and -pressing ctrl+c. - -Check that mmiotrace did not lose events due to a buffer filling up. Either -$ grep -i lost mydump.txt -which tells you exactly how many events were lost, or use -$ dmesg -to view your kernel log and look for "mmiotrace has lost events" warning. If -events were lost, the trace is incomplete. You should enlarge the buffers and -try again. Buffers are enlarged by first seeing how large the current buffers -are: -$ cat /debug/tracing/buffer_size_kb -gives you a number. Approximately double this number and write it back, for -instance: -$ echo 128000 > /debug/tracing/buffer_size_kb -Then start again from the top. - -If you are doing a trace for a driver project, e.g. Nouveau, you should also -do the following before sending your results: -$ lspci -vvv > lspci.txt -$ dmesg > dmesg.txt -$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt -and then send the .tar.gz file. The trace compresses considerably. Replace -"pciid" and "nick" with the PCI ID or model name of your piece of hardware -under investigation and your nick name. - - -How Mmiotrace Works -------------------- - -Access to hardware IO-memory is gained by mapping addresses from PCI bus by -calling one of the ioremap_*() functions. Mmiotrace is hooked into the -__ioremap() function and gets called whenever a mapping is created. Mapping is -an event that is recorded into the trace log. Note, that ISA range mappings -are not caught, since the mapping always exists and is returned directly. - -MMIO accesses are recorded via page faults. Just before __ioremap() returns, -the mapped pages are marked as not present. Any access to the pages causes a -fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace -marks the page present, sets TF flag to achieve single stepping and exits the -fault handler. The instruction that faulted is executed and debug trap is -entered. Here mmiotrace again marks the page as not present. The instruction -is decoded to get the type of operation (read/write), data width and the value -read or written. These are stored to the trace log. - -Setting the page present in the page fault handler has a race condition on SMP -machines. During the single stepping other CPUs may run freely on that page -and events can be missed without a notice. Re-enabling other CPUs during -tracing is discouraged. - - -Trace Log Format ----------------- - -The raw log is text and easily filtered with e.g. grep and awk. One record is -one line in the log. A record starts with a keyword, followed by keyword -dependant arguments. Arguments are separated by a space, or continue until the -end of line. The format for version 20070824 is as follows: - -Explanation Keyword Space separated arguments ---------------------------------------------------------------------------- - -read event R width, timestamp, map id, physical, value, PC, PID -write event W width, timestamp, map id, physical, value, PC, PID -ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID -iounmap event UNMAP timestamp, map id, PC, PID -marker MARK timestamp, text -version VERSION the string "20070824" -info for reader LSPCI one line from lspci -v -PCI address map PCIDEV space separated /proc/bus/pci/devices data -unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID - -Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual -is a kernel virtual address. Width is the data width in bytes and value is the -data value. Map id is an arbitrary id number identifying the mapping that was -used in an operation. PC is the program counter and PID is process id. PC is -zero if it is not recorded. PID is always zero as tracing MMIO accesses -originating in user space memory is not yet supported. - -For instance, the following awk filter will pass all 32-bit writes that target -physical addresses in the range [0xfb73ce40, 0xfb800000[ - -$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && -adr < 0xfb800000) print; }' - - -Tools for Developers --------------------- - -The user space tools include utilities for: -- replacing numeric addresses and values with hardware register names -- replaying MMIO logs, i.e., re-executing the recorded writes - - diff --git a/Documentation/vm/kmemtrace.txt b/Documentation/vm/kmemtrace.txt deleted file mode 100644 index a956d9b7f943..000000000000 --- a/Documentation/vm/kmemtrace.txt +++ /dev/null @@ -1,126 +0,0 @@ - kmemtrace - Kernel Memory Tracer - - by Eduard - Gabriel Munteanu - - -I. Introduction -=============== - -kmemtrace helps kernel developers figure out two things: -1) how different allocators (SLAB, SLUB etc.) perform -2) how kernel code allocates memory and how much - -To do this, we trace every allocation and export information to the userspace -through the relay interface. We export things such as the number of requested -bytes, the number of bytes actually allocated (i.e. including internal -fragmentation), whether this is a slab allocation or a plain kmalloc() and so -on. - -The actual analysis is performed by a userspace tool (see section III for -details on where to get it from). It logs the data exported by the kernel, -processes it and (as of writing this) can provide the following information: -- the total amount of memory allocated and fragmentation per call-site -- the amount of memory allocated and fragmentation per allocation -- total memory allocated and fragmentation in the collected dataset -- number of cross-CPU allocation and frees (makes sense in NUMA environments) - -Moreover, it can potentially find inconsistent and erroneous behavior in -kernel code, such as using slab free functions on kmalloc'ed memory or -allocating less memory than requested (but not truly failed allocations). - -kmemtrace also makes provisions for tracing on some arch and analysing the -data on another. - -II. Design and goals -==================== - -kmemtrace was designed to handle rather large amounts of data. Thus, it uses -the relay interface to export whatever is logged to userspace, which then -stores it. Analysis and reporting is done asynchronously, that is, after the -data is collected and stored. By design, it allows one to log and analyse -on different machines and different arches. - -As of writing this, the ABI is not considered stable, though it might not -change much. However, no guarantees are made about compatibility yet. When -deemed stable, the ABI should still allow easy extension while maintaining -backward compatibility. This is described further in Documentation/ABI. - -Summary of design goals: - - allow logging and analysis to be done across different machines - - be fast and anticipate usage in high-load environments (*) - - be reasonably extensible - - make it possible for GNU/Linux distributions to have kmemtrace - included in their repositories - -(*) - one of the reasons Pekka Enberg's original userspace data analysis - tool's code was rewritten from Perl to C (although this is more than a - simple conversion) - - -III. Quick usage guide -====================== - -1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable -CONFIG_KMEMTRACE). - -2) Get the userspace tool and build it: -$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository -$ cd kmemtrace-user/ -$ ./autogen.sh -$ ./configure -$ make - -3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the -'single' runlevel (so that relay buffers don't fill up easily), and run -kmemtrace: -# '$' does not mean user, but root here. -$ mount -t debugfs none /sys/kernel/debug -$ mount -t proc none /proc -$ cd path/to/kmemtrace-user/ -$ ./kmemtraced -Wait a bit, then stop it with CTRL+C. -$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't - # overrun, should - # be zero. -$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to - check its correctness] -$ ./kmemtrace-report - -Now you should have a nice and short summary of how the allocator performs. - -IV. FAQ and known issues -======================== - -Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix -this? Should I worry? -A: If it's non-zero, this affects kmemtrace's accuracy, depending on how -large the number is. You can fix it by supplying a higher -'kmemtrace.subbufs=N' kernel parameter. ---- - -Q: kmemtrace_check reports errors, how do I fix this? Should I worry? -A: This is a bug and should be reported. It can occur for a variety of -reasons: - - possible bugs in relay code - - possible misuse of relay by kmemtrace - - timestamps being collected unorderly -Or you may fix it yourself and send us a patch. ---- - -Q: kmemtrace_report shows many errors, how do I fix this? Should I worry? -A: This is a known issue and I'm working on it. These might be true errors -in kernel code, which may have inconsistent behavior (e.g. allocating memory -with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed -out this behavior may work with SLAB, but may fail with other allocators. - -It may also be due to lack of tracing in some unusual allocator functions. - -We don't want bug reports regarding this issue yet. ---- - -V. See also -=========== - -Documentation/kernel-parameters.txt -Documentation/ABI/testing/debugfs-kmemtrace - -- cgit v1.2.3 From c7bb349e7c25df1ae1bbb72675b9bb02e1d9c464 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 10 Apr 2009 08:52:43 +0200 Subject: kbuild: introduce destination-y for exported headers xtensa and arm have asked for a possibility to export headers and locate them in a specific directory when exported. Introduce destiantion-y to support this. This patch in additiona adds some limited documentation for the variables used for exported headers. Signed-off-by: Sam Ravnborg Cc: Oskar Schirmer Cc: Mikael Starvik --- Documentation/kbuild/makefiles.txt | 83 ++++++++++++++++++++++++++++++++++---- 1 file changed, 75 insertions(+), 8 deletions(-) (limited to 'Documentation') diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 51104f9194a5..d4b05672f9f7 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -40,10 +40,16 @@ This document describes the Linux kernel Makefiles. --- 6.7 Custom kbuild commands --- 6.8 Preprocessing linker scripts - === 7 Kbuild Variables - === 8 Makefile language - === 9 Credits - === 10 TODO + === 7 Kbuild syntax for exported headers + --- 7.1 header-y + --- 7.2 objhdr-y + --- 7.3 destination-y + --- 7.4 unifdef-y (deprecated) + + === 8 Kbuild Variables + === 9 Makefile language + === 10 Credits + === 11 TODO === 1 Overview @@ -1143,8 +1149,69 @@ When kbuild executes, the following steps are followed (roughly): The kbuild infrastructure for *lds file are used in several architecture-specific files. +=== 7 Kbuild syntax for exported headers + +The kernel include a set of headers that is exported to userspace. +Many headers can be exported as-is but other headers requires a +minimal pre-processing before they are ready for user-space. +The pre-processing does: +- drop kernel specific annotations +- drop include of compiler.h +- drop all sections that is kernel internat (guarded by ifdef __KERNEL__) + +Each relevant directory contain a file name "Kbuild" which specify the +headers to be exported. +See subsequent chapter for the syntax of the Kbuild file. + + --- 7.1 header-y + + header-y specify header files to be exported. + + Example: + #include/linux/Kbuild + header-y += usb/ + header-y += aio_abi.h + + The convention is to list one file per line and + preferably in alphabetic order. + + header-y also specify which subdirectories to visit. + A subdirectory is identified by a trailing '/' which + can be seen in the example above for the usb subdirectory. + + Subdirectories are visited before their parent directories. + + --- 7.2 objhdr-y + + objhdr-y specifies generated files to be exported. + Generated files are special as they need to be looked + up in another directory when doing 'make O=...' builds. + + Example: + #include/linux/Kbuild + objhdr-y += version.h + + --- 7.3 destination-y + + When an architecture have a set of exported headers that needs to be + exported to a different directory destination-y is used. + destination-y specify the destination directory for all exported + headers in the file where it is present. + + Example: + #arch/xtensa/platforms/s6105/include/platform/Kbuild + destination-y := include/linux + + In the example above all exported headers in the Kbuild file + will be located in the directory "include/linux" when exported. + + + --- 7.4 unifdef-y (deprecated) + + unifdef-y is deprecated. A direct replacement is header-y. + -=== 7 Kbuild Variables +=== 8 Kbuild Variables The top Makefile exports the following variables: @@ -1206,7 +1273,7 @@ The top Makefile exports the following variables: INSTALL_MOD_STRIP will used as the option(s) to the strip command. -=== 8 Makefile language +=== 9 Makefile language The kernel Makefiles are designed to be run with GNU Make. The Makefiles use only the documented features of GNU Make, but they do use many @@ -1225,14 +1292,14 @@ time the left-hand side is used. There are some cases where "=" is appropriate. Usually, though, ":=" is the right choice. -=== 9 Credits +=== 10 Credits Original version made by Michael Elizabeth Chastain, Updates by Kai Germaschewski Updates by Sam Ravnborg Language QA by Jan Engelhardt -=== 10 TODO +=== 11 TODO - Describe how kbuild supports shipped files with _shipped. - Generating offset header files. -- cgit v1.2.3 From 20375bf82567b5fecd331048c6cc1fc292b67710 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Fri, 10 Apr 2009 13:18:08 +0200 Subject: Documentation: explain the difference between __bitwise and __bitwise__ Simply added explanation from Al Viro in the following mail: http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/3164.html Cc: Al Viro Cc: Randy Dunlap Signed-off-by: Sam Ravnborg --- Documentation/sparse.txt | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt index 42f43fa59f24..34c76a55bc04 100644 --- a/Documentation/sparse.txt +++ b/Documentation/sparse.txt @@ -42,6 +42,14 @@ sure that bitwise types don't get mixed up (little-endian vs big-endian vs cpu-endian vs whatever), and there the constant "0" really _is_ special. +__bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that +is mostly warning-free and is supposed to stay that way. Warnings will +be generated without __CHECK_ENDIAN__. + +__bitwise - noisy stuff; in particular, __le*/__be* are that. We really +don't want to drown in noise unless we'd explicitly asked for it. + + Getting sparse ~~~~~~~~~~~~~~ -- cgit v1.2.3 From 2810ae8c73cbfb37891aa99dfbca46ffd40dbc91 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 10 Apr 2009 14:20:54 -0700 Subject: docbook: make cleandocs Add a 'make cleandocs' target to clean up all generated DocBook files. Signed-off-by: Randy Dunlap Signed-off-by: Sam Ravnborg --- Documentation/DocBook/Makefile | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index a3a83d38f96f..8918a32c6b3a 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -31,7 +31,7 @@ PS_METHOD = $(prefer-db2x) ### # The targets that may be used. -PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs +PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs BOOKS := $(addprefix $(obj)/,$(DOCBOOKS)) xmldocs: $(BOOKS) @@ -213,11 +213,12 @@ silent_gen_xml = : dochelp: @echo ' Linux kernel internal documentation in different formats:' @echo ' htmldocs - HTML' - @echo ' installmandocs - install man pages generated by mandocs' - @echo ' mandocs - man pages' @echo ' pdfdocs - PDF' @echo ' psdocs - Postscript' @echo ' xmldocs - XML DocBook' + @echo ' mandocs - man pages' + @echo ' installmandocs - install man pages generated by mandocs' + @echo ' cleandocs - clean all generated DocBook files' ### # Temporary files left by various tools @@ -235,6 +236,10 @@ clean-files := $(DOCBOOKS) \ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man +cleandocs: + $(Q)rm -f $(call objectify, $(clean-files)) + $(Q)rm -rf $(call objectify, $(clean-dirs)) + # Declare the contents of the .PHONY variable as phony. We keep that # information in a variable se we can use it in if_changed and friends. -- cgit v1.2.3 From 3f307fb37a6dd65b7eabda9c6208a9bd161dc16e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 13 Apr 2009 17:02:13 +0200 Subject: i2c-voodoo3: Deprecate in favor of tdfxfb Support for I2C/DDC was recently added to the tdfxfb driver, which means that the i2c-voodoo3 driver can be deprecated. Signed-off-by: Jean Delvare Cc: Krzysztof Helt --- Documentation/feature-removal-schedule.txt | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'Documentation') diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 7e2af10e8264..de491a3e2313 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -428,3 +428,12 @@ Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to After a reasonable transition period, we will remove the legacy fakephp interface. Who: Alex Chiang + +--------------------------- + +What: i2c-voodoo3 driver +When: October 2009 +Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate + driver but this caused driver conflicts. +Who: Jean Delvare + Krzysztof Helt -- cgit v1.2.3