arm: octeontx2: Add dtsi/dts files for Octeon TX2 CN913x DB

This patch adds the dtsi/dts files needed to support the Marvell
Octeon TX2 CN913x DB. This is only the base port with not all
interfaces supported fully.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

11 files changed, 1004 insertions, 0 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2538dd3c77..9c601a5c98 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -237,6 +237,12 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-xp-maxbcm.dtb			\
 	armada-xp-synology-ds414.dtb		\
 	armada-xp-theadorable.dtb		\
+	cn9130-db-A.dtb				\
+	cn9130-db-B.dtb				\
+	cn9131-db-A.dtb				\
+	cn9131-db-B.dtb				\
+	cn9132-db-A.dtb				\
+	cn9132-db-B.dtb				\
 	cn9130-crb-A.dtb			\
 	cn9130-crb-B.dtb
 
diff --git a/arch/arm/dts/cn9130-db-A.dts b/arch/arm/dts/cn9130-db-A.dts
new file mode 100644
index 0000000000..90d6e4a26f
--- /dev/null
+++ b/arch/arm/dts/cn9130-db-A.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell CN9130 development board (CP NOR) setup(A)";
+
+	aliases {
+		spi0 = &cp0_spi1;
+	};
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII1
+	 *	[12]	GPIO GE-IN
+	 *	[13-16]	SPI1
+	 *	[17-27]	NAND
+	 *	[28]	MSS_GPIO[5] XXX:(mode nr from a3900)
+	 *	[29-30]	SATA
+	 *	[31]	MSS_GPIO[4] XXX:(mode nr from a3900)
+	 *	[32,34]	SMI
+	 *	[33]	SDIO
+	 *	[35-36]	I2C1
+	 *	[37-38]	I2C0
+	 *	[39-43]	SDIOctrl
+	 *	[44-55]	RGMII2
+	 *	[56-62]	SDIO
+	 */
+
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 3   3   3   3   3   3   3   3   3   3
+		     3   3   0   3   3   3   3   1   1   1
+		     1   1   1   1   1   1   1   1   3   9
+		     9   3   7   6   7   2   2   2   2   1
+		     1   1   1   1   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xe 0xe 0xe 0xe
+		     0xe 0xe 0xe>;
+};
+
+/* U54 */
+&cp0_nand {
+	status = "disabled";
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/cn9130-db-B.dts b/arch/arm/dts/cn9130-db-B.dts
new file mode 100644
index 0000000000..fb52aa856b
--- /dev/null
+++ b/arch/arm/dts/cn9130-db-B.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+	model = "Marvell CN9130 development board (CP NAND) setup(B)";
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	/* MPP Bus:
+	 *	[0-11]	RGMII1
+	 *	[12]	GPIO GE-IN
+	 *	[13-14]	SPI1
+	 *	[15-27]	NAND
+	 *	[28]	MSS_GPIO[5] XXX:(mode nr from a3900)
+	 *	[29-30]	SATA
+	 *	[31]	MSS_GPIO[4] XXX:(mode nr from a3900)
+	 *	[32,34]	SMI
+	 *	[33]	SDIO
+	 *	[35-36]	I2C1
+	 *	[37-38]	I2C0
+	 *	[39-43]	SDIOctrl
+	 *	[44-55]	RGMII2
+	 *	[56-62]	SDIO
+	 */
+
+		/*   0   1   2   3   4   5   6   7   8   9 */
+	pin-func = < 3   3   3   3   3   3   3   3   3   3
+		     3   3   0   2   3   1   1   1   1   1
+		     1   1   1   1   1   1   1   1   3   9
+		     9   3   7   6   7   2   2   2   2   1
+		     1   1   1   1   1   1   1   1   1   1
+		     1   1   1   1   1   1   0xe 0xe 0xe 0xe
+		     0xe 0xe 0xe>;
+};
+
+/* U54 */
+&cp0_nand {
+	status = "okay";
+};
+
+/* U55 */
+&cp0_spi1 {
+	status = "disabled";
+};
diff --git a/arch/arm/dts/cn9130-db-dev-info.dtsi b/arch/arm/dts/cn9130-db-dev-info.dtsi
new file mode 100644
index 0000000000..68e9c0bd14
--- /dev/null
+++ b/arch/arm/dts/cn9130-db-dev-info.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+/ {
+	/* This should go only into devel boards */
+	compatible = "marvell,cp110";
+	sar {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sar_fields {
+			compatible = "marvell,sample-at-reset";
+			reg = <0x4c 0x4e>;
+			chip_count = <2>;
+			bit_width = <5>;
+			freq {
+				key = "freq";
+				description = "CPU/DDR and PIDI frequencies";
+				start-bit = <0>;
+				bit-length = <4>;
+				option-cnt = <3>;
+				options = "0x0", "CPU/DDR = 0x0: 2000/1200 Mhz, PIDI = 0: 1Ghz",
+					  "0x2", "CPU/DDR = 0x6: 2200/1200 Mhz, PIDI = 0: 1Ghz",
+					  "0x4", "CPU/DDR = 0xD: 1600/1200 Mhz, PIDI = 0: 1Ghz";
+				default = <0x2>;
+				status = "okay";
+			};
+			boot_mode {
+				key = "boot_mode";
+				description = "Boot mode options";
+				start-bit = <4>;
+				bit-length = <6>;
+				option-cnt = <4>;
+				options = "0xE", "CP0_NAND PIDI BW-8bit, PS-4KB, ECC-4bit\t(supported configuration: B)",
+					  "0xF", "CP0_NAND PIDI BW-8bit, PS-4KB, ECC-8bit\t(supported configuration: B)",
+					  "0x2A", "AP_EMMC",
+					  "0x32", "CP1_SPI_1 24bits";
+				default = <0x32>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/cn9130-db.dtsi b/arch/arm/dts/cn9130-db.dtsi
new file mode 100644
index 0000000000..1b28732ee7
--- /dev/null
+++ b/arch/arm/dts/cn9130-db.dtsi
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130.dtsi" /* include SoC device tree */
+#include "cn9130-db-dev-info.dtsi"
+
+/ {
+	model = "DB-CN-9130";
+	compatible = "marvell,cn9130-db", "marvell,cn91xx", "marvell,cn9030-vd",
+		     "marvell,cn9030", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		i2c0 = &cp0_i2c0;
+		gpio0 = &ap_gpio0;
+		gpio1 = &cp0_gpio0;
+		gpio2 = &cp0_gpio1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	cp0 {
+		config-space {
+			i2c@701000 {
+				/* U36 */
+				expander0: pca953x@21 {
+					compatible = "nxp,pca9555";
+					#gpio-cells = <2>;
+					reg = <0x21>;
+					status = "okay";
+				};
+			};
+			sdhci@780000 {
+				vqmmc-supply = <&cp0_reg_sd_vccq>;
+				vmmc-supply = <&cp0_reg_sd_vcc>;
+			};
+
+			ap_reg_mmc_vccq: ap_mmc_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "ap_mmc_vccq";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				gpios = <&expander0 8 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0-xhci1-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+			};
+			cp0_reg_sd_vccq: cp0_sd_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "cp0_sd_vccq";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp0_reg_sd_vcc: cp0_sd_vcc@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp0_sd_vcc";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+				enable-active-high;
+				regulator-always-on;
+			};
+			cp0_reg_usb3_current_lim0:cp0_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp0_reg_usb3_current_lim1: cp0_usb3_current_limiter@1 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * AP related configuration
+ */
+&ap_pinctl {
+	/* MPP Bus:
+	 * SDIO  [0-10, 12]
+	 * UART0 [11,19]
+	 */
+		/*   0 1 2 3 4 5 6 7 8 9 */
+	pin-func = < 1 1 1 1 1 1 1 1 1 1
+		     1 3 1 0 0 0 0 0 0 3 >;
+};
+
+/* on-board eMMC - U9 */
+&ap_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ap_emmc_pins>;
+	vqmmc-supply = <&ap_reg_mmc_vccq>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	status = "okay";
+};
+
+/*
+ * CP related configuration
+ */
+&cp0_pinctl {
+	cp0_nand_pins: cp0-nand-pins {
+		marvell,pins = <15 16 17 18 19 20 21 22 23 24 25 26 27 >;
+		marvell,function = <1>;
+	};
+	cp0_nand_rb: cp0-nand-rb {
+		marvell,pins = < 13 >;
+		marvell,function = <2>;
+	};
+};
+
+/*
+ * CP0
+ */
+&cp0_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp0_i2c1 {
+	status = "okay";
+};
+
+/* CON 28 */
+&cp0_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* U54 */
+&cp0_nand {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_nand_pins &cp0_nand_rb>;
+	status = "disabled";
+};
+
+/* U55 */
+&cp0_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp0_spi0_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>,	/* CS0 */
+	      <0 0xffffffff>,		/* CS1 */
+	      <0 0xffffffff>,		/* CS2 */
+	      <0 0xffffffff>;		/* CS3 */
+	status = "disabled";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor", "spi-flash";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+&cp0_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+/* SLM-1521-V2, CON6 */
+&cp0_pcie0 {
+	num-lanes = <4>;
+	status = "disabled";
+};
+
+&cp0_mdio {
+	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cp0_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp0_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+/* CON56 */
+&cp0_eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+/* CON57 */
+&cp0_eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "rgmii-id";
+};
+
+/* SLM-1521-V2, CON2 */
+&cp0_sata0 {
+	status = "okay";
+};
+
+&cp0_utmi0 {
+	status = "okay";
+};
+
+&cp0_utmi1 {
+	status = "okay";
+};
+
+&cp0_usb3_0 {
+	status = "okay";
+	vbus-supply = <&cp0_reg_usb3_vbus0>;
+	current-limiter = <&cp0_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+};
+
+&cp0_usb3_1 {
+	status = "okay";
+	vbus-supply = <&cp0_reg_usb3_vbus1>;
+	current-limiter = <&cp0_reg_usb3_current_lim1>;
+	vbus-disable-delay = <500>;
+};
+
+&cp0_pcie0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/cn9131-db-A.dts b/arch/arm/dts/cn9131-db-A.dts
new file mode 100644
index 0000000000..81aff17e31
--- /dev/null
+++ b/arch/arm/dts/cn9131-db-A.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db-A.dts"
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board (CP NOR) setup(A)";
+	compatible = "marvell,cn9131-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp1_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x2)
+	 *	Lane 1: PCIe0 (x2)
+	 *	Lane 2: unconnected
+	 *	Lane 3: USB1
+	 *	Lane 4: SFP (port 0)
+	 *	Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_UNCONNECTED>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* CON50 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-4 */
+	marvell,sfp-tx-disable-gpio = <&cp1_gpio0 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/dts/cn9131-db-B.dts b/arch/arm/dts/cn9131-db-B.dts
new file mode 100644
index 0000000000..0269183620
--- /dev/null
+++ b/arch/arm/dts/cn9131-db-B.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9130-db-B.dts"
+#include "cn9131-db.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board (CP NAND) setup(B)";
+	compatible = "marvell,cn9131-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
+
+&cp1_comphy {
+	/* Serdes Configuration:
+	 *	Lane 0: PCIe0 (x2)
+	 *	Lane 1: PCIe0 (x2)
+	 *	Lane 2: SFI (port 0)
+	 *	Lane 3: USB1
+	 *	Lane 4: SGMII (port 1)
+	 *	Lane 5: SATA1
+	 */
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+	phy2 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+	phy4 {
+		phy-type = <COMPHY_TYPE_SGMII1>;
+		phy-speed = <COMPHY_SPEED_1_25G>;
+	};
+	phy5 {
+		phy-type = <COMPHY_TYPE_SATA1>;
+	};
+};
+
+&cp1_ethernet {
+	status = "okay";
+};
+
+/* 3310 RJ45 CON55 */
+&cp1_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-2 */
+	phy = <&sfi_phy8>; /* required by 3310 fw download */
+};
+
+/* CON50 */
+&cp1_eth1 {
+	status = "okay";
+	phy-mode = "sgmii"; /* lane-4 */
+	marvell,sfp-tx-disable-gpio = <&cp1_gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&cp1_xmdio {
+	status = "okay";
+	sfi_phy8: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
diff --git a/arch/arm/dts/cn9131-db.dtsi b/arch/arm/dts/cn9131-db.dtsi
new file mode 100644
index 0000000000..5057605584
--- /dev/null
+++ b/arch/arm/dts/cn9131-db.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#undef CP110_NAME
+#undef CP110_NUM
+#undef CP110_PCIE_MEM_SIZE
+#undef CP110_PCIEx_CPU_MEM_BASE
+#undef CP110_PCIEx_BUS_MEM_BASE
+
+/* CP110-1 Settings */
+#define CP110_NAME			cp1
+#define CP110_NUM			1
+#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface)	(0xe2000000 + (iface) * 0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))
+
+#include "armada-cp110.dtsi"
+
+/ {
+	model = "Marvell CN9131 development board";
+	compatible = "marvell,cn9131-db";
+
+	aliases {
+		gpio3 = &cp1_gpio0;
+		gpio4 = &cp1_gpio1;
+	};
+
+	cp1 {
+		config-space {
+			cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				pinctrl-names = "default";
+				pinctrl-0 = <&cp1_xhci0_vbus_pins>;
+				regulator-name = "cp1-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp1_gpio0 3 GPIO_ACTIVE_HIGH>;
+			};
+			cp1_reg_usb3_current_lim0: cp1_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp1_gpio0 2 GPIO_ACTIVE_HIGH>;
+			};
+			cp1_pcie_reset_pins: cp1-pcie-reset-pins {
+				marvell,pins = <0>;
+				marvell,function = <0>;
+			};
+		};
+	};
+};
+
+&cp1_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+/* CON40 */
+&cp1_pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_pcie_reset_pins>;
+	marvell,reset-gpio = <&cp1_gpio0 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+	num-lanes = <2>;
+		/* non-prefetchable memory */
+	ranges = <0x82000000 0 0xe2000000 0 0xe2000000 0 0xf00000>;
+};
+
+&cp1_pinctl {
+	compatible = "marvell,mvebu-pinctrl",
+		     "marvell,cp115-standalone-pinctrl";
+	bank-name ="cp1-110";
+
+	/* MPP Bus:
+	 *	[0-12]	GPIO
+	 *	[13-16]	SPI1
+	 *	[17-27]	GPIO (Default)
+	 *	[28]	SATA1_PRESENT_ACTIVEn
+	 *	[29-34]	GPIO (Default)
+	 *	[35-36]	xSMI
+	 *	[37-38] I2C0
+	 *	[39-62]	GPIO
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x3  0x3  0x3  0x3  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x9  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x7  0x7  0x2  0x2  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0 >;
+
+	cp1_i2c0_pins: cp1-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+	cp1_spi0_pins: cp1-spi-pins-0 {
+		marvell,pins = < 13 14 15 16 >;
+		marvell,function = <3>;
+	};
+	cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
+		marvell,pins = <3>;
+		marvell,function = <0>;
+	};
+};
+
+/* CON32 */
+&cp1_sata0 {
+	status = "okay";
+};
+
+/* U24 */
+&cp1_spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp1_spi0_pins>;
+	reg = <0x700680 0x50>,		/* control */
+	      <0x2000000 0x1000000>,	/* CS0 */
+	      <0 0xffffffff>,		/* CS1 */
+	      <0 0xffffffff>,		/* CS2 */
+	      <0 0xffffffff>;		/* CS3 */
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		compatible = "jedec,spi-nor", "spi-flash";
+		reg = <0x0>;
+		/* On-board MUX does not allow higher frequencies */
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x200000>;
+			};
+
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x200000 0xe00000>;
+			};
+		};
+	};
+};
+
+/* CON58 */
+&cp1_usb3_1 {
+	vbus-supply = <&cp1_reg_usb3_vbus0>;
+	current-limiter = <&cp1_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+	status = "okay";
+};
+
+&cp1_utmi1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/cn9132-db-A.dts b/arch/arm/dts/cn9132-db-A.dts
new file mode 100644
index 0000000000..ba9b8a25d1
--- /dev/null
+++ b/arch/arm/dts/cn9132-db-A.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9131-db-A.dts"
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board (CP NOR) setup(A)";
+	compatible = "marvell,cn9132-db", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm/dts/cn9132-db-B.dts b/arch/arm/dts/cn9132-db-B.dts
new file mode 100644
index 0000000000..e126e23ea6
--- /dev/null
+++ b/arch/arm/dts/cn9132-db-B.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#include "cn9131-db-B.dts"
+#include "cn9132-db.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board (CP NAND) setup(B)";
+	compatible = "marvell,cn9132-db-B", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm/dts/cn9132-db.dtsi b/arch/arm/dts/cn9132-db.dtsi
new file mode 100644
index 0000000000..d51a4d0b30
--- /dev/null
+++ b/arch/arm/dts/cn9132-db.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018-2021 Marvell International Ltd.
+ */
+
+#undef CP110_NAME
+#undef CP110_NUM
+#undef CP110_PCIE_MEM_SIZE
+#undef CP110_PCIEx_CPU_MEM_BASE
+#undef CP110_PCIEx_BUS_MEM_BASE
+
+/* CP110-2 Settings */
+#define CP110_NAME			cp2
+#define CP110_NUM			2
+#define CP110_PCIE_MEM_SIZE(iface)	(0xf00000)
+#define CP110_PCIEx_CPU_MEM_BASE(iface)	(0xe5000000 + (iface) *  0x1000000)
+#define CP110_PCIEx_BUS_MEM_BASE(iface)	(CP110_PCIEx_CPU_MEM_BASE(iface))
+
+#include "armada-cp110.dtsi"
+
+/ {
+	model = "Marvell CN9132 development board";
+	compatible = "marvell,cn9132-db";
+
+	aliases {
+		gpio5 = &cp2_gpio0;
+		gpio6 = &cp2_gpio1;
+	};
+
+	cp2 {
+		config-space {
+			sdhci@780000 {
+				vqmmc-supply = <&cp2_reg_sd_vccq>;
+			};
+
+			cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp2-xhci0-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
+				compatible = "regulator-fixed";
+				regulator-name = "cp2-xhci1-vbus";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				startup-delay-us = <100000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 3 GPIO_ACTIVE_HIGH>;
+			};
+			cp2_reg_sd_vccq: cp2_sd_vccq@0 {
+				compatible = "regulator-gpio";
+				regulator-name = "cp2_sd_vcc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				/* cp2_mpp49 */
+				gpios = <&cp2_gpio1 17 GPIO_ACTIVE_HIGH>;
+				states = <1800000 0x1
+					  3300000 0x0>;
+			};
+			cp2_reg_usb3_current_lim0: cp2_usb3_current_limiter@0 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			cp2_reg_usb3_current_lim1: cp2_usb3_current_limiter@1 {
+				compatible = "regulator-fixed";
+				regulator-min-microamp = <900000>;
+				regulator-max-microamp = <900000>;
+				regulator-force-boot-off;
+				gpio = <&cp2_gpio0 1 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&cp2_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_i2c0_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cp2_pinctl {
+	compatible = "marvell,mvebu-pinctrl",
+		     "marvell,cp115-standalone-pinctrl";
+	bank-name ="cp2-110";
+
+	/* MPP Bus:
+	 *	[0-26]		GPIO
+	 *	[27]		SATA0_PRESENT_ACTIVEn
+	 *	[28]		SATA1_PRESENT_ACTIVEn
+	 *	[29-31, 33]	GPIO (Default)
+	 *	[32,34]		SMI
+	 *	[37-38]		I2C0
+	 *	[39-53]		GPIO
+	 *	[54]		SD_CRD_RSTn (out)
+	 *	[55]		SD_CRD_DT (in)
+	 *	[56-62]		SDIO
+	 */
+		/*   0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x9  0x9  0x0
+		     0x0  0x0  0x8  0x0  0x8  0x0  0x0  0x2  0x2  0x0
+		     0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0  0x0
+		     0x0  0x0  0x0  0x0  0xa  0xb  0xe  0xe  0xe  0xe
+		     0xe  0xe  0xe >;
+
+	cp2_i2c0_pins: cp2-i2c-pins-0 {
+		marvell,pins = < 37 38 >;
+		marvell,function = <2>;
+	};
+
+	cp2_sdhci_pins: cp2-sdhi-pins-0 {
+		marvell,pins = < 56 57 58 59 60 61 >;
+		marvell,function = <14>;
+	};
+};
+
+&cp2_usb3_0 {
+	status = "okay";
+	vbus-supply = <&cp2_reg_usb3_vbus0>;
+	current-limiter = <&cp2_reg_usb3_current_lim0>;
+	vbus-disable-delay = <500>;
+};
+
+/* SLM-1521-V2, CON11 */
+&cp2_usb3_1 {
+	status = "okay";
+	vbus-supply = <&cp2_reg_usb3_vbus1>;
+	current-limiter = <&cp2_reg_usb3_current_lim1>;
+	vbus-disable-delay = <500>;
+	status = "okay";
+};
+
+&cp2_utmi0 {
+	status = "okay";
+};
+
+&cp2_utmi1 {
+	status = "okay";
+};
+
+&cp2_comphy {
+	phy0 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy1 {
+		phy-type = <COMPHY_TYPE_PEX0>;
+	};
+
+	phy2 {
+		phy-type = <COMPHY_TYPE_SATA0>;
+	};
+
+	phy3 {
+		phy-type = <COMPHY_TYPE_USB3_HOST1>;
+	};
+
+	phy4 {
+		phy-type = <COMPHY_TYPE_SFI0>;
+		phy-speed = <COMPHY_SPEED_10_3125G>;
+	};
+
+	phy5 {
+		phy-type = <COMPHY_TYPE_PEX2>;
+	};
+};
+
+&cp2_ethernet {
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON9 */
+&cp2_eth0 {
+	status = "okay";
+	phy-mode = "sfi";
+};
+
+/* SLM-1521-V2, CON6 */
+&cp2_pcie0 {
+	/* non-prefetchable memory */
+	ranges =<0x82000000 0 0xe5000000 0 0xe5000000 0 0x1000000>;
+	num-lanes = <2>;
+	status = "okay";
+};
+
+/* SLM-1521-V2, CON8 */
+&cp2_pcie2 {
+	num-lanes = <1>;
+	status = "okay";
+};
+
+&cp2_pinctl {
+};
+
+/* SLM-1521-V2, CON4 */
+&cp2_sata0 {
+	status = "okay";
+};
+
+/* CON 2 on SLM-1683 - microSD */
+&cp2_sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cp2_sdhci_pins>;
+	bus-width = <4>;
+	status = "okay";
+};