summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-31PROTO: map UART, flash and shared page for StMMfwu_updatejmarinho
2021-01-07ta: pkcs11: Add TEE Identity based authentication supportVesa Jääskeläinen
In C_InitToken() if PIN is NULL_PTR then it will activate TEE Identity based authentication support for token. Once activated: - When ever PIN is required client's TEE Identity will be used for authentication - PIN failure counters are disabled - If new PIN is given as input it is in form of PIN ACL string - It can be disabled with C_InitToken with non-zero PIN Internally protected authentication path will be used for mode determination. Acked-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2021-01-07ta: pkcs11: set_pin: use token shortcut like in other pin functionsVesa Jääskeläinen
Use common shortcut variable 'token' as in check_so_pin and check_user_pin. Acked-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2021-01-07ta: pkcs11: entry_ck_token_initialize: reset SO flags on initVesa Jääskeläinen
If successful token init has been performed and new PIN is set then reset all pin change flags. Call update_persistent_db() only once as a last step during the execution. Acked-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2021-01-07pkcs11: persistent_token: Don't read token object UUIDs if we have noneRobin van der Gracht
Do not call TEE_ReadObjectData() when there is no object data to read because the function panics when reading 0 bytes. Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
2021-01-07ta: pkcs11: Change sizeof argument for consistencyRobin van der Gracht
The bytes subtracted here were added a few lines ago. Since *db_objs was used there we should also do this here for readability. Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Robin van der Gracht <robin@protonic.nl>
2021-01-07core: tee_rpmb_fs: Return error when block decryption failsRobin van der Gracht
When decrypt_block fails (although unlikely) it shouldn't be silently ignored. In such case the data in the buffer pointed to by *out is unmodified or bogus while the return code is TEE_SUCCESS. Signed-off-by: Robin van der Gracht <robin@protonic.nl> Reviewed-by: Jerome Forissier <jerome@forissier.org>
2021-01-07core: remove temporary external DT mappingJens Wiklander
During boot the external DT is mapped while processing the DT. Once OP-TEE is done with the DT it should be unmapped to avoid stale mappings that might cause problems later. Fix this by calling core_mmu_rem_mapping() from release_external_dt() just before jumping to normal world. Fixes: https://github.com/OP-TEE/optee_os/issues/4278 Reviewed-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-07core: ifdef frag_id member in struct dt_descriptorJens Wiklander
The frag_id member in struct dt_descriptor is only used if CFG_EXTERNAL_DTB_OVERLAY is defined, so make it conditional. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-07core: add core_mmu_remove_mapping()Jens Wiklander
Adds core_mmu_remove_mapping() which removes mappings earlier added with core_mmu_add_mapping(). Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Acked-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-07shippable: remove useless CFG_CORE_ASLR=y for QEMUJerome Forissier
Since commit 87372da451d4 ("Enable ASLR by default"), most platforms have ASLR turned on and do not need to explicitly set CFG_CORE_ASLR=y at build time. Remove the redundant settings in .shippable.yml. Note that CFG_CORE_ASLR=n is still build-tested by a few platforms such as rcar, rzg and zynqmp. Signed-off-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-07core: imx: remove security check for i.MX6SDLRouven Czerwinski
The i.MX6SDL SoCs do not expose the security configuration in the HPSR registers correctly, they always return SNVS_SECURITY_CFG_FAB (000), however the SSM information is still exposed correctly. Remove the check for the security configuration, since the bits all read zero on these SoCs, even if they are securely booted. Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Acked-by: Clement Faure <clement.faure@nxp.com>
2021-01-07plat-imx, plat-rzn1: remove redundant recipes to generate tee-raw.binJerome Forissier
Since commit 5ae0290f7f3b ("core: kernel: link.mk: Move rules to generate tee-raw.bin and tee.srec from rcar platform"), the recipe to produce tee-raw.bin is in the common makefile core/arch/arm/kernel/link.mk. Therefore the recipes in core/arch/arm/plat-imx/link.mk and core/arch/arm/plat-rzn1/link.mk are redundant and need to be removed. Fixes the following build warning: $ make -s PLATFORM=imx-mx6ullevk core/arch/arm/plat-imx/link.mk:7: warning: overriding recipe for target 'out/arm-plat-imx/core/tee-raw.bin' core/arch/arm/kernel/link.mk:230: warning: ignoring old recipe for target 'out/arm-plat-imx/core/tee-raw.bin' Signed-off-by: Jerome Forissier <jerome@forissier.org> Acked-by: Sumit Garg <sumit.garg@linaro.org>
2021-01-06core: rpmb fs uses mempool for temporary transfer buffersEtienne Carriere
RPMB FS driver may allocates a temporary buffer of size the one provided by userland caller. These may be big buffer of dozens of kbytes and may exhaust the heap capacities. Change the implementation to use a 4kByte temporary buffer to update RPMB data instead of an allocated buffer of the object target size. RPMB FAT entry data is updated by chunks of the temporary buffer size, and RPMB FAT meta data is updated afterwards as prior this change. Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-01-06.shippable: caam: explicitly enable CRYPTO_DRIVERJorge Ramirez-Ortiz
Enabling CAAM no longer enables CRYPTO_DRIVER. Maintain shippable code coverage by explicitly enabling the CRYPTO_DRIVER on CAAM supported platforms (except when the SE050 is a preferred CRYPTO_DRIVER provider). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Clement Faure <clement.faure@nxp.com>
2021-01-06.shippable: se050: use expressionsJorge Ramirez-Ortiz
Improve readability by using expressions Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jerome Forissier <jerome@forissier.org>
2021-01-06.shippable: imx8mmevk: se050: use RNG and HUK from CAAMJorge Ramirez-Ortiz
Select a more standard configuration using the HUK and RNG from the CAAM device. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jerome Forissier <jerome@forissier.org>
2021-01-06plat-imx: do not enable CFG_CRYPTO_DRIVER with CFG_NXP_CAAMJorge Ramirez-Ortiz
Some IMX users might choose a different crypto driver (like the SE050) but still require CAAM to provide the hardware unique key and perhaps the RNG - since reading the RNG over I2C can impact performance on some platforms. This commit allows for such configuration. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Clement Faure <clement.faure@nxp.com>
2021-01-05core: ldelf: implement separate syscalls for ldelfBalint Dobszay
Implements a separate syscall handler for ldelf to decouple it from user TAs and enable using it for all TSs. The calling convention is the same as for utee_* syscalls. To distinguish between the different SVCs, the syscall handler pointer is updated before entering ldelf and restored after returning. The step of opening a system PTA session and invoking the commands there is eliminated, the necessary functionality is implemented in the ldelf syscall functions. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: add handle_db_is_empty() functionBalint Dobszay
Implements a function that checks if a handle database is empty, i.e. all pointers stored in the database are NULL. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: invoke SVC handler through struct ts_sessionBalint Dobszay
Store the current SVC handler function pointer in struct ts_session, and invoke the handler through this. Enables changing the SVC handler for a session without modifying the ts_ops defined in the session context. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: extract ldelf related code from system PTABalint Dobszay
Various functions in the system PTA are only used in conjunction with ldelf. They either implement a system service needed only by ldelf (system_open_ta_binary(), etc.) or they provide an interface for TAs to invoke services implemented in user space by ldelf (call_ldelf_dlopen(), call_ldelf_dlsym()). Extract these to a separate file as a first step towards converting the PTA system_*() calls into proper ldelf-specific syscalls. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Acked-by: Jerome Forissier <jerome@forissier.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: move user_ctx field to struct ts_sessionBalint Dobszay
The user_ctx field in struct tee_ta_session is used by PTAs to keep track of session specific information. Move it to struct ts_session to make it generic and reachable for all sessions, not just TAs. This enables extracting ldelf related code from system PTA. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: prefer struct user_mode_ctx in system PTABalint Dobszay
Most functions in system PTA have struct ts_session as parameter, but only use it for getting the pointer to user_mode_ctx. This commit simplifies the code by doing the casting in a single place and passing user_mode_ctx as an argument instead. This also eliminates casting to user_ta_ctx as an intermediate step. It is a preparation step for extracting ldelf related functions from system PTA to an ldelf specific syscall handler. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
2021-01-05core: rpmb: return TEE_ERROR_STORAGE_NO_SPACE if no space leftStefan Schmidt
So far the error TEE_ERROR_OUT_OF_MEMORY was returned if no free memory could be allocated in the RPMB to store new data. According to TEE Internal Core API Specification the error TEE_ERROR_STORAGE_NO_SPACE shall be returned if insufficient space is available to create the persistent object. Signed-off-by: Stefan Schmidt <snst@meek.de> Reviewed-by: Jerome Forissier <jerome@forissier.org> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-01-05Reintroduce memalign() and friendsJens Wiklander
memalign() and friends where removed with the commit 8cd8a6296974 ("Remove memalign()"). At the time memalign() was unused and a bit buggy. This new memalign() is believed to work correctly due to extensive testing. Recently memalign() has been needed by certain drivers so it makes sense to add it again. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05libutil: add hdr_size parameter to bgetJens Wiklander
Adds a hdr_size parameter to bget(), bgetz() and bgetr(). hdr_size must be a multiple of BGET_HDR_QUANTUM. If hdr_size is larger than 0 the buffer will be allocated so that the alignment constraints are fulfilled after advancing hdr_size bytes into the returned buffer. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05libutil: add alignment parameter to bgetJens Wiklander
Adds alignment parameter to bget(), bgetz() and bgetr(). If alignment is larger then 0 the returned buffer is guaranteed to have an address which is a multiple of this value. The algorithm is basically unchanged, in the way that the memory is still allocated from the end of a free memory block. The difference is in the core implementation in bget() where now alignment of the returned memory is taken into account. If only allocating with the minimum alignment the memory blocks are expected to be allocated in the same pattern. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05Introduce CFG_TA_BGET_TESTJens Wiklander
Introduces CFG_TA_BGET_TEST which compiles the integrated bget test suite together with the rest of bget. When enabled, the test entry point is bget_main_test() in libutils. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05core: introduce CFG_ENABLE_EMBEDDED_TESTSJens Wiklander
Introduces CFG_ENABLE_EMBEDDED_TESTS disabled by default. This flag is used to control the default value of all other embedded tests. This changes the default value of CFG_TEE_CORE_EMBED_INTERNAL_TESTS to 'n' since CFG_ENABLE_EMBEDDED_TESTS defaults to 'n'. A Shippable target is updated with CFG_ENABLE_EMBEDDED_TESTS=y to have these tests compiled in some configuration. Acked-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05qemu_v8: configure secure interruptsJens Wiklander
Configures GIC and enable reception of interrupts from the secure uart. This enables testing of secure interrupts on the QEMU v8 platform by typing in the secure log. Acked-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-05crypto: se050: build: elliptic curveJorge Ramirez-Ortiz
Makefile changes to compile-in and enable elliptic curve support. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-01-05crypto: se050: core: elliptic curve implementationJorge Ramirez-Ortiz
Elliptic curve driver. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-01-05crypto: se050: adaptors: elliptic curveJorge Ramirez-Ortiz
APDU and utility functions required to support elliptic curve cryptography. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
2021-01-04ta: pkcs11: Add more checks before destroying object in a sessionRuchika Gupta
Few checks were missing in the implementaion of C_DestroyObject() as per PKCS#11 Specification. These have been added now. These checks are - only session objects can be destroyed during a read only session - only public objects can be destroyed unless the normal user is logged in - Certain objects may not be destroyed. Calling C_DestroyObject on such objects will result in the CKR_ACTION_PROHIBITED error code. An application can consult the object's CKA_DESTROYABLE attribute to determine if an object may be destroyed or not. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-04ta: pkcs11: Fix return value when trying to open parallel sessionVesa Jääskeläinen
It is mandatory to have CKF_SERIAL_SESSION set when invoking C_OpenSession(). When omitted CKR_SESSION_PARALLEL_NOT_SUPPORTED must be returned. Specified in: PKCS #11 Cryptographic Token Interface Base Specification Version 2.40 Plus Errata 01 5.6 Session management functions C_OpenSession Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2021-01-04drivers: crypto: se050: limitations to RSA cryptoJorge Ramirez-Ortiz
The supported algorithms for encryption/decryption are: PKCS1_OAEP PKCS1_V1_5 When using PKCS1_PSS_MGF1 the se050 also has some restrictions on the hash algorithms that can be used depending on the RSA key size. Source: Plug And Trust MW documentation, Release v02,14,00 (Apr 03, 2020) Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Jerome Forissier <jerome@forissier.org>
2020-12-28ta: pkcs11: Check for CKA_PRIVATE when creating objectsRuchika Gupta
PKCS#11 Specification[1] states that Private session/token objects cannot be created in Public sessions. So, add a check for access type when creating objects. [1] PKCS #11 Cryptographic Token Interface Usage Guide Version 2.40 (Table 3 - ACCESS TO DIFFERENT TYPES OBJECTS BY DIFFERENT TYPES OF SESSIONS) Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-28ta: pkcs11: Fix error returnedRuchika Gupta
When trying to access an object of type CKA_PRIVATE without logging in, the error returned should be PKCS11_CKR_USER_NOT_LOGGED_IN. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-27mk/compile.mk: Fix handling of '+' in path for generated include guardsVesa Jääskeläinen
When building with bitbake with gitpkgv class git revision details have '+' as delimeter. Version details appears in path and this causes following warnings during the OP-TEE OS build: In file included from core/arch/arm/kernel/entry_a64.S:11: /build/.../optee-os/devel+gitrAUTOINC+e97c83bd6f-r0/build.zcu102/core/include/generated/asm-defines.h:1:123: warning: extra tokens at end of #ifndef directive 1 | #ifndef _build_..._optee_os_devel+gitrAUTOINC+e97c83bd6f_r0_build_zcu102_core_include_generated_asm_defines_h | ^ /build/.../optee-os/devel+gitrAUTOINC+e97c83bd6f-r0/build.zcu102/core/include/generated/asm-defines.h:2:9: warning: missing whitespace after the macro name 2 | #define _build_..._optee_os_devel+gitrAUTOINC+e97c83bd6f_r0_build_zcu102_core_include_generated_asm_defines_h | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Use get_attribute_ptr() instead of get_attribute()Ruchika Gupta
When just trying to determine if an attribute is present in the list or not withour requiring the actual value of the attribute, using get_attribute_ptr() is better to use as it is more light-weight than it's counterpart get_attribute(). Suggested-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Add class_id in create_attributes_from_template()Ruchika Gupta
Add a parameter to pass pkcs11_class_id. The parameter will be used when attributes need to be created for a template supporting public or private class key. It is unused for now. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Add class and type hint in sanitize_client_object()Ruchika Gupta
Specification allows one to pass templates while genrating key/keypair where class and type may be omitted from the template. In such cases, pass class and type as hint in sanitize_client_object() so that they can be added in the attribute list being prepared. Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Fix for CKA_KEY_GEN_MECHANISM in create_attributes_from_template()Ruchika Gupta
CKA_KEY_GEN_MECHANISM attribute is not added in the attribute list (attrs) from the template (temp) when a key object is created as it doesn't fall in mandatory/optional attribute. So, error checking for this attribute should be done on the original source template(temp) and not the attribute list(attrs) in create_attributes_from_template(). Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Fix for CKA_LOCAL in create_attributes_from_template()Ruchika Gupta
CKA_LOCAL attribute is not added in the attribute list (attrs) from the template (temp) when a key object is created as it doesn't fall in mandatory/optional attribute. So, error checking for this attribute should be done on the original source template(temp) and not the attribute list(attrs) in create_attributes_from_template(). Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Add support for Key GenerationRuchika Gupta
Adds support of mechanisms PKCS11_CKM_GENERIC_SECRET_KEY_GEN, PKCS11_CKM_AES_KEY_GEN for key generation API. Co-developed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Define TA mechanisms for Key GenerationRuchika Gupta
Adds the mechanisms PKCS11_CKM_GENERIC_SECRET_KEY_GEN in enum pkcs11_mechanism_id. Co-developed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-23ta: pkcs11: Define command for Key GenerationRuchika Gupta
Add command PKCS11_CMD_GENERATE_KEY in enum pkcs11_ta_cmd. Co-developed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
2020-12-19shippable: imx8mm/imx6ull: add plug and trust supportJorge Ramirez-Ortiz
Validates the different SE050 configuration options with the Plug And Trust library on arm64 and arm. This will be useful to avoid regressions when multiple crypto drivers are enabled. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Jerome Forissier <jerome@forissier.org>
2020-12-17ta: pkcs11: Fix the error code returnedRuchika Gupta
While generating a key of type PKCS11_CKO_SECRET_KEY, if CKA_VALUE_LEN field is not specified in the attribute template, the error returned needs to be PKCS11_CKR_TEMPLATE_INCOMPLETE. Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Ruchika Gupta <ruchika.gupta@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-20 07:03:38 +0000