aboutsummaryrefslogtreecommitdiff
path: root/boehm-gc/configure
diff options
context:
space:
mode:
Diffstat (limited to 'boehm-gc/configure')
-rwxr-xr-xboehm-gc/configure248
1 files changed, 151 insertions, 97 deletions
diff --git a/boehm-gc/configure b/boehm-gc/configure
index f6b2277188c..c0e262a83b7 100755
--- a/boehm-gc/configure
+++ b/boehm-gc/configure
@@ -61,7 +61,6 @@ program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
@@ -176,7 +175,6 @@ Configuration:
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
@@ -347,11 +345,6 @@ EOF
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -517,16 +510,12 @@ fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
@@ -604,7 +593,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:608: checking for a BSD compatible install" >&5
+echo "configure:597: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -657,7 +646,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:661: checking whether build environment is sane" >&5
+echo "configure:650: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
@@ -714,7 +703,7 @@ test "$program_suffix" != NONE &&
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:718: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:707: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -747,12 +736,12 @@ else
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:751: checking for Cygwin environment" >&5
+echo "configure:740: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 756 "configure"
+#line 745 "configure"
#include "confdefs.h"
int main() {
@@ -763,7 +752,7 @@ int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
@@ -780,19 +769,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:784: checking for mingw32 environment" >&5
+echo "configure:773: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 789 "configure"
+#line 778 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:796: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
@@ -903,7 +892,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:907: checking host system type" >&5
+echo "configure:896: checking host system type" >&5
host_alias=$host
case "$host_alias" in
@@ -924,7 +913,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:928: checking target system type" >&5
+echo "configure:917: checking target system type" >&5
target_alias=$target
case "$target_alias" in
@@ -942,7 +931,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:946: checking build system type" >&5
+echo "configure:935: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -982,7 +971,7 @@ fi
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:986: checking for working aclocal" >&5
+echo "configure:975: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -995,7 +984,7 @@ else
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:999: checking for working autoconf" >&5
+echo "configure:988: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1008,7 +997,7 @@ else
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1012: checking for working automake" >&5
+echo "configure:1001: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1021,7 +1010,7 @@ else
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1025: checking for working autoheader" >&5
+echo "configure:1014: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1034,7 +1023,7 @@ else
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1038: checking for working makeinfo" >&5
+echo "configure:1027: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
@@ -1060,7 +1049,7 @@ fi
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1064: checking for $ac_word" >&5
+echo "configure:1053: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1090,7 +1079,7 @@ if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_word" >&5
+echo "configure:1083: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1139,7 +1128,7 @@ fi
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1143: checking whether we are using GNU C" >&5
+echo "configure:1132: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1148,7 +1137,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
@@ -1163,7 +1152,7 @@ if test $ac_cv_prog_gcc = yes; then
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1167: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1156: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1200,7 +1189,7 @@ do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1204: checking for $ac_word" >&5
+echo "configure:1193: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1233,7 +1222,7 @@ test -n "$CXX" || CXX="gcc"
test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1237: checking whether we are using GNU C++" >&5
+echo "configure:1226: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1242,7 +1231,7 @@ else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1246: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
@@ -1257,7 +1246,7 @@ if test $ac_cv_prog_gxx = yes; then
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1261: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1250: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1290,7 +1279,7 @@ fi
# NEWLIB_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1294: checking build system type" >&5
+echo "configure:1283: checking build system type" >&5
build_alias=$build
case "$build_alias" in
@@ -1311,7 +1300,7 @@ echo "$ac_t""$build" 1>&6
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1315: checking for $ac_word" >&5
+echo "configure:1304: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1343,7 +1332,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1347: checking for $ac_word" >&5
+echo "configure:1336: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1375,7 +1364,7 @@ fi
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1379: checking for $ac_word" >&5
+echo "configure:1368: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1407,7 +1396,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1411: checking for $ac_word" >&5
+echo "configure:1400: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1452,7 +1441,7 @@ fi
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1456: checking for a BSD compatible install" >&5
+echo "configure:1445: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1506,7 +1495,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1510: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1499: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@@ -1544,7 +1533,7 @@ if false; then
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1548: checking for executable suffix" >&5
+echo "configure:1537: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1554,10 +1543,10 @@ else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
@@ -1676,7 +1665,7 @@ ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1680: checking for ld used by GCC" >&5
+echo "configure:1669: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
@@ -1706,10 +1695,10 @@ echo "configure:1680: checking for ld used by GCC" >&5
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1710: checking for GNU ld" >&5
+echo "configure:1699: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1713: checking for non-GNU ld" >&5
+echo "configure:1702: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -1744,7 +1733,7 @@ else
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1748: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1737: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1761,7 +1750,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1765: checking for $LD option to reload object files" >&5
+echo "configure:1754: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1773,7 +1762,7 @@ reload_flag=$lt_cv_ld_reload_flag
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1777: checking for BSD-compatible nm" >&5
+echo "configure:1766: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1811,7 +1800,7 @@ NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1815: checking whether ln -s works" >&5
+echo "configure:1804: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1832,7 +1821,7 @@ else
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1836: checking how to recognise dependant libraries" >&5
+echo "configure:1825: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -1942,7 +1931,7 @@ irix5* | irix6*)
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | sh* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
@@ -2005,13 +1994,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2009: checking for object suffix" >&5
+echo "configure:1998: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2004: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
@@ -2035,7 +2024,7 @@ case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2039: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2028: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2097,7 +2086,7 @@ fi
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2101: checking for file" >&5
+echo "configure:2090: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2168,7 +2157,7 @@ esac
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2172: checking for $ac_word" >&5
+echo "configure:2161: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2200,7 +2189,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2204: checking for $ac_word" >&5
+echo "configure:2193: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2235,7 +2224,7 @@ fi
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2239: checking for $ac_word" >&5
+echo "configure:2228: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2267,7 +2256,7 @@ if test -n "$ac_tool_prefix"; then
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2271: checking for $ac_word" >&5
+echo "configure:2260: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2334,8 +2323,21 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2338 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2339: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2327 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2328: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
@@ -2347,6 +2349,7 @@ case $host in
LD="${LD-ld} -64"
;;
esac
+ fi
fi
rm -rf conftest*
;;
@@ -2354,7 +2357,7 @@ case $host in
ia64-*-hpux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
- if { (eval echo configure:2358: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:2361: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case "`/usr/bin/file conftest.o`" in
*ELF-32*)
HPUX_IA64_MODE="32"
@@ -2367,12 +2370,54 @@ ia64-*-hpux*)
rm -rf conftest*
;;
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2376: checking whether the C compiler needs -belf" >&5
+echo "configure:2421: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2385,14 +2430,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2389 "configure"
+#line 2434 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
@@ -2422,7 +2467,7 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2426: checking how to run the C++ preprocessor" >&5
+echo "configure:2471: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -2435,12 +2480,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2439 "configure"
+#line 2484 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2444: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
@@ -2587,7 +2632,7 @@ fi
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2591: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2636: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
@@ -2620,7 +2665,7 @@ if false; then
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2624: checking for executable suffix" >&5
+echo "configure:2669: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
@@ -2630,10 +2675,10 @@ else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
@@ -2653,7 +2698,7 @@ ac_exeext=$EXEEXT
fi
echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:2657: checking for thread model used by GCC" >&5
+echo "configure:2702: checking for thread model used by GCC" >&5
THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
if test -z "$THREADS"; then
THREADS=no
@@ -2773,6 +2818,12 @@ EOF
#define NO_GETENV 1
EOF
+ if test $enable_shared = yes; then
+ cat >> confdefs.h <<\EOF
+#define GC_DLL 1
+EOF
+
+ fi
;;
decosf1 | irix | mach | os2 | solaris | dce | vxworks)
{ echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
@@ -2784,7 +2835,7 @@ esac
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2788: checking for dlopen in -ldl" >&5
+echo "configure:2839: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
@@ -2792,7 +2843,7 @@ else
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2796 "configure"
+#line 2847 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
@@ -2803,7 +2854,7 @@ int main() {
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
@@ -2891,7 +2942,7 @@ fi
alpha*-*-*)
machdep="alpha_mach_dep.lo"
;;
- i?86-*-solaris2.[89]*)
+ i?86-*-solaris2.[89] | i?86-*-solaris2.1?)
cat >> confdefs.h <<\EOF
#define SOLARIS25_PROC_VDB_BUG_FIXED 1
EOF
@@ -2920,7 +2971,7 @@ EOF
EOF
;;
- sparc-sun-solaris2.3*)
+ sparc-sun-solaris2.3)
machdep="sparc_mach_dep.lo"
cat >> confdefs.h <<\EOF
#define SUNOS53_SHARED_LIB 1
@@ -3038,15 +3089,17 @@ EOF
fi
-
-
-if test -z "$with_cross_host"; then
- USE_LIBDIR_TRUE=
- USE_LIBDIR_FALSE='#'
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexeclibdir='$(toolexecdir)/lib'
else
- USE_LIBDIR_TRUE='#'
- USE_LIBDIR_FALSE=
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexeclibdir='$(libdir)'
fi
+toolexeclibdir=$toolexeclibdir/`$CC -print-multi-os-directory`
+
+
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
@@ -3249,8 +3302,8 @@ s%@INCLUDES@%$INCLUDES%g
s%@CXXINCLUDES@%$CXXINCLUDES%g
s%@addobjs@%$addobjs%g
s%@MY_CFLAGS@%$MY_CFLAGS%g
-s%@USE_LIBDIR_TRUE@%$USE_LIBDIR_TRUE%g
-s%@USE_LIBDIR_FALSE@%$USE_LIBDIR_FALSE%g
+s%@toolexecdir@%$toolexecdir%g
+s%@toolexeclibdir@%$toolexeclibdir%g
CEOF
EOF
@@ -3361,6 +3414,7 @@ ac_configure_args="${multilib_arg} ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
gc_basedir=${gc_basedir}
CC="${CC}"
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
DEFS="$DEFS"
EOF
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-05 02:07:27 +0000