diff options
Diffstat (limited to 'boehm-gc/Makefile.dj')
| -rw-r--r-- | boehm-gc/Makefile.dj | 296 |
1 files changed, 0 insertions, 296 deletions
diff --git a/boehm-gc/Makefile.dj b/boehm-gc/Makefile.dj deleted file mode 100644 index 979ac6f33e7..00000000000 --- a/boehm-gc/Makefile.dj +++ /dev/null @@ -1,296 +0,0 @@ -# Primary targets: -# gc.a - builds basic library -# libgc.a - builds library for use with g++ "-fgc-keyword" extension -# c++ - adds C++ interface to library -# cords - adds cords (heavyweight strings) to library -# test - prints porting information, then builds basic version of gc.a, -# and runs some tests of collector and cords. Does not add cords or -# c++ interface to gc.a -# cord/de$(EXE_SUFFIX) - builds dumb editor based on cords. -CC=gcc -CXX=gcc -x c++ -CXXLD=gxx -RM=rm -f -MV=mv -EXE_SUFFIX=.exe -RANLIB=ranlib - -CFLAGS= -O -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DSILENT -DATOMIC_UNCOLLECTABLE - -# Setjmp_test may yield overly optimistic results when compiled -# without optimization. -# -DSILENT disables statistics printing, and improves performance. -# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly -# altered stubborn objects, at substantial performance cost. -# Use only for incremental collector debugging. -# -DFIND_LEAK causes the collector to assume that all inaccessible -# objects should have been explicitly deallocated, and reports exceptions. -# Finalization and the test program are not usable in this mode. -# -DSOLARIS_THREADS enables support for Solaris (thr_) threads. -# (Clients should also define SOLARIS_THREADS and then include -# gc.h before performing thr_ or dl* or GC_ operations.) -# This is broken on nonSPARC machines. -# -DIRIX_THREADS enables support for Irix pthreads. See README.irix. -# -DALL_INTERIOR_POINTERS allows all pointers to the interior -# of objects to be recognized. (See gc_priv.h for consequences.) -# -DSMALL_CONFIG tries to tune the collector for small heap sizes, -# usually causing it to use less space in such situations. -# Incremental collection no longer works in this case. -# -DLARGE_CONFIG tunes the collector for unusually large heaps. -# Necessary for heaps larger than about 500 MB on most machines. -# Recommended for heaps larger than about 64 MB. -# -DDONT_ADD_BYTE_AT_END is meaningful only with -# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS -# causes all objects to be padded so that pointers just past the end of -# an object can be recognized. This can be expensive. (The padding -# is normally more than one byte due to alignment constraints.) -# -DDONT_ADD_BYTE_AT_END disables the padding. -# -DNO_SIGNALS does not disable signals during critical parts of -# the GC process. This is no less correct than many malloc -# implementations, and it sometimes has a significant performance -# impact. However, it is dangerous for many not-quite-ANSI C -# programs that call things like printf in asynchronous signal handlers. -# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not -# have execute permission, i.e. it may be impossible to execute -# code from the heap. Currently this only affects the incremental -# collector on UNIX machines. It may greatly improve its performance, -# since this may avoid some expensive cache synchronization. -# -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the -# new syntax "operator new[]" for allocating and deleting arrays. -# See gc_cpp.h for details. No effect on the C part of the collector. -# This is defined implicitly in a few environments. -# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined -# as aliases for X, GC_realloc, and GC_free, respectively. -# Calloc is redefined in terms of the new malloc. X should -# be either GC_malloc or GC_malloc_uncollectable. -# The former is occasionally useful for working around leaks in code -# you don't want to (or can't) look at. It may not work for -# existing code, but it often does. Neither works on all platforms, -# since some ports use malloc or calloc to obtain system memory. -# (Probably works for UNIX, and win32.) -# -DIGNORE_FREE turns calls to free into a noop. Only useful with -# -DREDIRECT_MALLOC. -# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls. -# Reduces code size slightly at the expense of debuggability. -# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of -# order by specifying a nonstandard finalization mark procedure (see -# finalize.c). Objects reachable from finalizable objects will be marked -# in a sepearte postpass, and hence their memory won't be reclaimed. -# Not recommended unless you are implementing a language that specifies -# these semantics. -# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable. -# This is useful if either the vendor malloc implementation is poor, -# or if REDIRECT_MALLOC is used. - -LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \ - -DREDIRECT_MALLOC=GC_malloc_uncollectable \ - -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS -# Flags for building libgc.a -- the last two are required. - -CXXFLAGS= $(CFLAGS) -DOPERATOR_NEW_ARRAY -AR= ar -RANLIB= ranlib - - -# Redefining srcdir allows object code for the nonPCR version of the collector -# to be generated in different directories. In this case, the destination directory -# should contain a copy of the original include directory. -srcdir = . -VPATH = $(srcdir) - -OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o typd_mlc.o ptr_chck.o mallocx.o - -CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c typd_mlc.c ptr_chck.c mallocx.c - -CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga - -CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o - -SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ - sparc_mach_dep.s gc.h gc_typed.h gc_hdrs.h gc_priv.h gc_private.h \ - config.h gc_mark.h include/gc_inl.h include/gc_inline.h gc.man \ - threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \ - gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \ - $(CORD_SRCS) - -OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \ - README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \ - SCoptions.amiga README.amiga README.win32 cord/README \ - cord/gc.h include/gc.h include/gc_typed.h include/cord.h \ - include/ec.h include/private/cord_pos.h include/private/config.h \ - include/private/gc_hdrs.h include/private/gc_priv.h \ - include/gc_cpp.h README.rs6000 \ - include/weakpointer.h README.QUICK callprocs pc_excludes \ - barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \ - MacOS.c EMX_MAKEFILE makefile.depend README.debugging \ - include/gc_cpp.h Mac_files/datastart.c Mac_files/dataend.c \ - Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \ - add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \ - win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj - -CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \ - $(srcdir)/cord/private/cord_pos.h - -UTILS= if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) threadlibs$(EXE_SUFFIX) - -# Libraries needed for curses applications. Only needed for de. -CURSES= -lcurses -ltermlib - -# The following is irrelevant on most systems. But a few -# versions of make otherwise fork the shell specified in -# the SHELL environment variable. -SHELL= /bin/sh - -SPECIALCFLAGS = -# Alternative flags to the C compiler for mach_dep.c. -# Mach_dep.c often doesn't like optimization, and it's -# not time-critical anyway. -# Set SPECIALCFLAGS to -q nodirect_code on Encore. - -all: gc.a gctest$(EXE_SUFFIX) - -pcr: PCR-Makefile gc_private.h gc_hdrs.h gc.h config.h mach_dep.o $(SRCS) - make -f PCR-Makefile depend - make -f PCR-Makefile - -$(OBJS) test.o dyn_load.o dyn_load_sunos53.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \ - $(srcdir)/config.h $(srcdir)/gc_typed.h Makefile -# The dependency on Makefile is needed. Changing -# options such as -DSILENT affects the size of GC_arrays, -# invalidating all .o files that rely on gc_priv.h - -mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h - -base_lib gc.a: $(OBJS) dyn_load.o $(UTILS) - echo > base_lib - $(RM) on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o - ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(OBJS) dyn_load.o - -./if_not_there on_sparc_sunos5 $(RANLIB) gc.a -# ignore ranlib failure; that usually means it doesn't exist, and isn't needed - -libgc.a: - make CFLAGS="$(LIBGC_CFLAGS)" clean gc.a gcc_support.o - $(MV) gc.a libgc.a - -$(RM) on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus libgc.a gcc_support.o - ./if_not_there on_sparc_sunos5 $(AR) ru libgc.a gcc_support.o - -./if_not_there on_sparc_sunos5 $(RANLIB) libgc.a - -cords: $(CORD_OBJS) cord/cordtest$(EXE_SUFFIX) $(UTILS) - -$(RM) on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS) - ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(CORD_OBJS) - -./if_not_there on_sparc_sunos5 $(RANLIB) gc.a - -gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile - $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc - -test_cpp: $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \ -base_lib $(UTILS) - -$(RM) test_cpp test_cpp$(EXE_SUFFIX) - ./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld - ./if_not_there test_cpp$(EXE_SUFFIX) $(CXXLD) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a - $(RM) test_cpp - -c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp - -$(RM) on_sparc_sunos5 - $(AR) ru gc.a gc_cpp.o - $(RANLIB) gc.a - ./test_cpp$(EXE_SUFFIX) 1 - echo > c++ - -dyn_load_sunos53.o: dyn_load.c - $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@ - -mach_dep.o: $(srcdir)/mach_dep.c - -$(RM) mach_dep.o - $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c - -mark_rts.o: $(srcdir)/mark_rts.c - -$(RM) mark_rts.o - $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c - -cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c - $(MV) cordbscs.o cord/cordbscs.o -# not all compilers understand -o filename - -cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c - $(MV) cordxtra.o cord/cordxtra.o - -cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c - $(MV) cordprnt.o cord/cordprnt.o - -cord/cordtest$(EXE_SUFFIX): $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) - -$(RM) cord/cordtest$(EXE_SUFFIX) - $(CC) $(CFLAGS) -o cordtest $(srcdir)/cord/cordtest.c\ - $(CORD_OBJS) gc.a - ./if_not_there cord/cordtest$(EXE_SUFFIX) \ - $(MV) cordtest$(EXE_SUFFIX) cord/cordtest$(EXE_SUFFIX) - -cord/de$(EXE_SUFFIX): $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a - -$(RM) cord/de$(EXE_SUFFIX) - ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c\ -cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb - ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c\ -cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld - ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c\ -cord/cordbscs.o cord/cordxtra.o gc.a -lcurses - ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c\ -cord/cordbscs.o cord/cordxtra.o gc.a -lcurses - ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c\ -cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) - ./if_not_there cord/de$(EXE_SUFFIX) \ - $(MV) de$(EXE_SUFFIX) cord/de$(EXE_SUFFIX) - -if_mach$(EXE_SUFFIX): $(srcdir)/if_mach.c $(srcdir)/config.h - $(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c - -$(RM) if_mach - -threadlibs$(EXE_SUFFIX): $(srcdir)/threadlibs.c $(srcdir)/config.h Makefile - $(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c - -$(RM) threadlibs - -if_not_there$(EXE_SUFFIX): $(srcdir)/if_not_there.c - $(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c - -$(RM) if_not_there - -clean: - -$(RM) gc.a *.o - -$(RM) *.o - -$(RM) gctest gctest_dyn_link test_cpp \ - setjmp_test mon.out gmon.out a.out core if_not_there if_mach \ - $(CORD_OBJS) cordtest cord/cordtest de cord/de - -$(RM) gctest$(EXE_SUFFIX) gctest_dyn_link$(EXE_SUFFIX) test_cpp$(EXE_SUFFIX) \ - setjmp_test$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) if_mach$(EXE_SUFFIX) \ - cord/cordtest$(EXE_SUFFIX) - -$(RM) *~ - -gctest$(EXE_SUFFIX): test.o gc.a - -$(RM) gctest$(EXE_SUFFIX) - $(CC) $(CFLAGS) -o gctest test.o gc.a - $(RM) gctest - -# If an optimized setjmp_test generates a segmentation fault, -# odds are your compiler is broken. Gctest may still work. -# Try compiling setjmp_t.c unoptimized. -setjmp_test$(EXE_SUFFIX): $(srcdir)/setjmp_t.c $(srcdir)/gc.h \ - if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) - -$(RM) setjmp_test$(EXE_SUFFIX) - $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c - $(RM) setjmp_test - -test: KandRtest cord/cordtest$(EXE_SUFFIX) - ./cord/cordtest$(EXE_SUFFIX) - -# Those tests that work even with a K&R C compiler: -KandRtest: setjmp_test$(EXE_SUFFIX) gctest$(EXE_SUFFIX) - ./setjmp_test$(EXE_SUFFIX) - ./gctest$(EXE_SUFFIX) - |