diff options
Diffstat (limited to 'boehm-gc/Makefile.orig')
| -rw-r--r-- | boehm-gc/Makefile.orig | 400 |
1 files changed, 0 insertions, 400 deletions
diff --git a/boehm-gc/Makefile.orig b/boehm-gc/Makefile.orig deleted file mode 100644 index 056df2f66f7..00000000000 --- a/boehm-gc/Makefile.orig +++ /dev/null @@ -1,400 +0,0 @@ -# Primary targets: -# gc.a - builds basic library -# libgc.a - builds library for use with g++ "-fgc-keyword" extension -# c++ - adds C++ interface to library -# cords - adds cords (heavyweight strings) to library -# test - prints porting information, then builds basic version of gc.a, -# and runs some tests of collector and cords. Does not add cords or -# c++ interface to gc.a -# cord/de - builds dumb editor based on cords. -ABI_FLAG= -CC=cc $(ABI_FLAG) -CXX=CC $(ABI_FLAG) -AS=as $(ABI_FLAG) -# The above doesn't work with gas, which doesn't run cpp. -# Define AS as `gcc -c -x assembler-with-cpp' instead. -# Under Irix 6, you will have to specify the ABI for as if you specify -# it for the C compiler. - -CFLAGS= -O -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT - -# Setjmp_test may yield overly optimistic results when compiled -# without optimization. -# -DSILENT disables statistics printing, and improves performance. -# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly -# altered stubborn objects, at substantial performance cost. -# Use only for incremental collector debugging. -# -DFIND_LEAK causes the collector to assume that all inaccessible -# objects should have been explicitly deallocated, and reports exceptions. -# Finalization and the test program are not usable in this mode. -# -DSOLARIS_THREADS enables support for Solaris (thr_) threads. -# (Clients should also define SOLARIS_THREADS and then include -# gc.h before performing thr_ or dl* or GC_ operations.) -# Must also define -D_REENTRANT -# -D_SOLARIS_PTHREADS enables support for Solaris pthreads. -# Define SOLARIS_THREADS as well. -# -DIRIX_THREADS enables support for Irix pthreads. See README.irix. -# -DALL_INTERIOR_POINTERS allows all pointers to the interior -# of objects to be recognized. (See gc_priv.h for consequences.) -# -DSMALL_CONFIG tries to tune the collector for small heap sizes, -# usually causing it to use less space in such situations. -# Incremental collection no longer works in this case. -# -DLARGE_CONFIG tunes the collector for unusually large heaps. -# Necessary for heaps larger than about 500 MB on most machines. -# Recommended for heaps larger than about 64 MB. -# -DDONT_ADD_BYTE_AT_END is meaningful only with -# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS -# causes all objects to be padded so that pointers just past the end of -# an object can be recognized. This can be expensive. (The padding -# is normally more than one byte due to alignment constraints.) -# -DDONT_ADD_BYTE_AT_END disables the padding. -# -DNO_SIGNALS does not disable signals during critical parts of -# the GC process. This is no less correct than many malloc -# implementations, and it sometimes has a significant performance -# impact. However, it is dangerous for many not-quite-ANSI C -# programs that call things like printf in asynchronous signal handlers. -# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not -# have execute permission, i.e. it may be impossible to execute -# code from the heap. Currently this only affects the incremental -# collector on UNIX machines. It may greatly improve its performance, -# since this may avoid some expensive cache synchronization. -# -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the -# new syntax "operator new[]" for allocating and deleting arrays. -# See gc_cpp.h for details. No effect on the C part of the collector. -# This is defined implicitly in a few environments. -# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined -# as aliases for X, GC_realloc, and GC_free, respectively. -# Calloc is redefined in terms of the new malloc. X should -# be either GC_malloc or GC_malloc_uncollectable. -# The former is occasionally useful for working around leaks in code -# you don't want to (or can't) look at. It may not work for -# existing code, but it often does. Neither works on all platforms, -# since some ports use malloc or calloc to obtain system memory. -# (Probably works for UNIX, and win32.) -# -DIGNORE_FREE turns calls to free into a noop. Only useful with -# -DREDIRECT_MALLOC. -# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls. -# Reduces code size slightly at the expense of debuggability. -# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of -# order by specifying a nonstandard finalization mark procedure (see -# finalize.c). Objects reachable from finalizable objects will be marked -# in a sepearte postpass, and hence their memory won't be reclaimed. -# Not recommended unless you are implementing a language that specifies -# these semantics. -# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response -# to explicit GC_invoke_finalizers() calls. -# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable. -# This is useful if either the vendor malloc implementation is poor, -# or if REDIRECT_MALLOC is used. -# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly -# sets the heap block size. Each heap block is devoted to a single size and -# kind of object. For the incremental collector it makes sense to match -# the most likely page size. Otherwise large values result in more -# fragmentation, but generally better performance for large heaps. -# -DUSE_MMAP use MMAP instead of sbrk to get new memory. -# Works for Solaris and Irix. -# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than -# GC_scratch_alloc() to get stack memory. -# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever -# the garbage collector detects a value that looks almost, but not quite, -# like a pointer, print both the address containing the value, and the -# value of the near-bogus-pointer. Can be used to identifiy regions of -# memory that are likely to contribute misidentified pointers. -# -DOLD_BLOCK_ALLOC Use the old, possibly faster, large block -# allocation strategy. The new strategy tries harder to minimize -# fragmentation, sometimes at the expense of spending more time in the -# large block allocator and/or collecting more frequently. -# - - - -LIBGC_CFLAGS= -O -DNO_SIGNALS -DSILENT \ - -DREDIRECT_MALLOC=GC_malloc_uncollectable \ - -DDONT_ADD_BYTE_AT_END -DALL_INTERIOR_POINTERS -# Flags for building libgc.a -- the last two are required. - -CXXFLAGS= $(CFLAGS) -AR= ar -RANLIB= ranlib - - -# Redefining srcdir allows object code for the nonPCR version of the collector -# to be generated in different directories. In this case, the destination directory -# should contain a copy of the original include directory. -srcdir = . -VPATH = $(srcdir) - -OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o - -CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c - -CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c cord/cord.h cord/ec.h cord/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga - -CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o - -SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ - sparc_mach_dep.s gc.h gc_typed.h gc_hdrs.h gc_priv.h gc_private.h \ - config.h gc_mark.h include/gc_inl.h include/gc_inline.h gc.man \ - threadlibs.c if_mach.c if_not_there.c gc_cpp.cc gc_cpp.h weakpointer.h \ - gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h gc_alloc.h \ - sparc_sunos4_mach_dep.s solaris_threads.h $(CORD_SRCS) - -OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \ - README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \ - SCoptions.amiga README.amiga README.win32 cord/README \ - cord/gc.h include/gc.h include/gc_typed.h include/cord.h \ - include/ec.h include/private/cord_pos.h include/private/config.h \ - include/private/gc_hdrs.h include/private/gc_priv.h \ - include/gc_cpp.h README.rs6000 \ - include/weakpointer.h README.QUICK callprocs pc_excludes \ - barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \ - MacOS.c EMX_MAKEFILE makefile.depend README.debugging \ - include/gc_cpp.h Mac_files/datastart.c Mac_files/dataend.c \ - Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \ - add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \ - win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \ - README.alpha README.linux version.h Makefile.DLLs gc_watcom.asm \ - WCC_MAKEFILE - -CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \ - $(srcdir)/cord/private/cord_pos.h - -UTILS= if_mach if_not_there threadlibs - -# Libraries needed for curses applications. Only needed for de. -CURSES= -lcurses -ltermlib - -# The following is irrelevant on most systems. But a few -# versions of make otherwise fork the shell specified in -# the SHELL environment variable. -SHELL= /bin/sh - -SPECIALCFLAGS = -# Alternative flags to the C compiler for mach_dep.c. -# Mach_dep.c often doesn't like optimization, and it's -# not time-critical anyway. -# Set SPECIALCFLAGS to -q nodirect_code on Encore. - -all: gc.a gctest - -pcr: PCR-Makefile gc_private.h gc_hdrs.h gc.h config.h mach_dep.o $(SRCS) - make -f PCR-Makefile depend - make -f PCR-Makefile - -$(OBJS) test.o dyn_load.o dyn_load_sunos53.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \ - $(srcdir)/config.h $(srcdir)/gc_typed.h Makefile -# The dependency on Makefile is needed. Changing -# options such as -DSILENT affects the size of GC_arrays, -# invalidating all .o files that rely on gc_priv.h - -mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h - -base_lib gc.a: $(OBJS) dyn_load.o $(UTILS) - echo > base_lib - rm -f on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o - ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(OBJS) dyn_load.o - ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null -# ignore ranlib failure; that usually means it doesn't exist, and isn't needed - -libgc.a: - make CFLAGS="$(LIBGC_CFLAGS)" clean gc.a gcc_support.o - mv gc.a libgc.a - rm -f on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus libgc.a gcc_support.o - ./if_not_there on_sparc_sunos5 $(AR) ru libgc.a gcc_support.o - ./if_not_there on_sparc_sunos5 $(RANLIB) libgc.a || cat /dev/null - -cords: $(CORD_OBJS) cord/cordtest $(UTILS) - rm -f on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS) - ./if_not_there on_sparc_sunos5 $(AR) ru gc.a $(CORD_OBJS) - ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null - -gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h $(srcdir)/gc.h Makefile - $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc - -test_cpp: $(srcdir)/test_cpp.cc $(srcdir)/gc_cpp.h gc_cpp.o $(srcdir)/gc.h \ -base_lib $(UTILS) - rm -f test_cpp - ./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld - ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a `./threadlibs` - -c++: gc_cpp.o $(srcdir)/gc_cpp.h test_cpp - rm -f on_sparc_sunos5 - ./if_mach SPARC SUNOS5 touch on_sparc_sunos5 - ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o - ./if_not_there on_sparc_sunos5 $(AR) ru gc.a gc_cpp.o - ./if_not_there on_sparc_sunos5 $(RANLIB) gc.a || cat /dev/null - ./test_cpp 1 - echo > c++ - -dyn_load_sunos53.o: dyn_load.c - $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@ - -# SunOS5 shared library version of the collector -libgc.so: $(OBJS) dyn_load_sunos53.o - $(CC) -G -o libgc.so $(OBJS) dyn_load_sunos53.o -ldl - -# Alpha/OSF shared library version of the collector -libalphagc.so: $(OBJS) - ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc - ln libalphagc.so libgc.so - -# IRIX shared library version of the collector -libirixgc.so: $(OBJS) dyn_load.o - ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc - ln libirixgc.so libgc.so - -mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s $(srcdir)/rs6000_mach_dep.s $(UTILS) - rm -f mach_dep.o - ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s - ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s - ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s - ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s - ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s - ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s - ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s - ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c - -mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS) - rm -f mark_rts.o - -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c - ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c -# Work-around for DEC optimizer tail recursion elimination bug. -# The ALPHA-specific line should be removed if gcc is used. - -alloc.o: version.h - -cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c - mv cordbscs.o cord/cordbscs.o -# not all compilers understand -o filename - -cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c - mv cordxtra.o cord/cordxtra.o - -cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES) - $(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c - mv cordprnt.o cord/cordprnt.o - -cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) - rm -f cord/cordtest - ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb - ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld - ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs` - -cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS) - rm -f cord/de - ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb - ./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld - ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses - ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses - ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses - ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs` - -if_mach: $(srcdir)/if_mach.c $(srcdir)/config.h - $(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c - -threadlibs: $(srcdir)/threadlibs.c $(srcdir)/config.h Makefile - $(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c - -if_not_there: $(srcdir)/if_not_there.c - $(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c - -clean: - rm -f gc.a *.o gctest gctest_dyn_link test_cpp \ - setjmp_test mon.out gmon.out a.out core if_not_there if_mach \ - threadlibs $(CORD_OBJS) cord/cordtest cord/de - -rm -f *~ - -gctest: test.o gc.a if_mach if_not_there - rm -f gctest - ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest test.o gc.a -lucb - ./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest test.o gc.a -ldld - ./if_not_there gctest $(CC) $(CFLAGS) -o gctest test.o gc.a `./threadlibs` - -# If an optimized setjmp_test generates a segmentation fault, -# odds are your compiler is broken. Gctest may still work. -# Try compiling setjmp_t.c unoptimized. -setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/gc.h if_mach if_not_there - $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c - -test: KandRtest cord/cordtest - cord/cordtest - -# Those tests that work even with a K&R C compiler: -KandRtest: setjmp_test gctest - ./setjmp_test - ./gctest - -add_gc_prefix: add_gc_prefix.c - $(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c - -gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix - ./add_gc_prefix $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files - (cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar - -pc_gc.tar: $(SRCS) $(OTHER_FILES) - tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES) - -floppy: pc_gc.tar - -mmd a:/cord - -mmd a:/cord/private - -mmd a:/include - -mmd a:/include/private - mkdir /tmp/pc_gc - cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -) - -mcopy -tmn /tmp/pc_gc/* a: - -mcopy -tmn /tmp/pc_gc/cord/* a:/cord - -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord - -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private - -mcopy -tmn /tmp/pc_gc/include/* a:/include - -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private - rm -r /tmp/pc_gc - -gc.tar.Z: gc.tar - compress gc.tar - -gc.tar.gz: gc.tar - gzip gc.tar - -lint: $(CSRCS) test.c - lint -DLINT $(CSRCS) test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall" - -# BTL: added to test shared library version of collector. -# Currently works only under SunOS5. Requires GC_INIT call from statically -# loaded client code. -ABSDIR = `pwd` -gctest_dyn_link: test.o libgc.so - $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread - -gctest_irix_dyn_link: test.o libirixgc.so - $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link test.o -lirixgc - -test_dll.o: test.c libgc_globals.h - $(CC) $(CFLAGS) -DGC_USE_DLL -c test.c -o test_dll.o - -test_dll: test_dll.o libgc_dll.a libgc.dll - $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll - -SYM_PREFIX-libgc=GC - -# Uncomment the following line to build a GNU win32 DLL -# include Makefile.DLLs - -reserved_namespace: $(SRCS) - for file in $(SRCS) test.c test_cpp.cc; do \ - sed s/GC_/_GC_/g < $$file > tmp; \ - cp tmp $$file; \ - done - -user_namespace: $(SRCS) - for file in $(SRCS) test.c test_cpp.cc; do \ - sed s/_GC_/GC_/g < $$file > tmp; \ - cp tmp $$file; \ - done |