\input texinfo @c -*-texinfo-*- @comment %**start of header @setfilename info-stnd.info @settitle GNU Info @set InfoProgVer 2.11 @paragraphindent none @footnotestyle end @synindex vr cp @synindex fn cp @synindex ky cp @comment %**end of header @comment $Id: info-stnd.texi,v 1.1.1.1 1997/08/21 22:58:01 jason Exp $ @dircategory Texinfo documentation system @direntry * info program: (info-stnd). Standalone Info-reading program. @end direntry @ifinfo This file documents GNU Info, a program for viewing the on-line formatted versions of Texinfo files. This documentation is different from the documentation for the Info reader that is part of GNU Emacs. If you do not know how to use Info, but have a working Info reader, you should read that documentation first. Copyright @copyright{} 1992, 93, 96 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. @ignore Permission is granted to process this file through TeX and print the results, provided the printed document carries a copying permission notice identical to this one except for the removal of this paragraph (this paragraph not being relevant to the printed manual). @end ignore Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled ``Copying'' and ``GNU General Public License'' are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. @end ifinfo @titlepage @title GNU Info User's Guide @subtitle For GNU Info version @value{InfoProgVer} @author Brian J. Fox (bfox@@ai.mit.edu) @page @vskip 0pt plus 1filll Copyright @copyright{} 1992, 1993 Free Software Foundation Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled ``Copying'' and ``GNU General Public License'' are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. @end titlepage @ifinfo @node Top, What is Info, (dir), (dir) @top The GNU Info Program This file documents GNU Info, a program for viewing the on-line formatted versions of Texinfo files, version @value{InfoProgVer}. This documentation is different from the documentation for the Info reader that is part of GNU Emacs. @end ifinfo @menu * What is Info:: * Options:: Options you can pass on the command line. * Cursor Commands:: Commands which move the cursor within a node. * Scrolling Commands:: Commands for moving the node around in a window. * Node Commands:: Commands for selecting a new node. * Searching Commands:: Commands for searching an Info file. * Xref Commands:: Commands for selecting cross references. * Window Commands:: Commands which manipulate multiple windows. * Printing Nodes:: How to print out the contents of a node. * Miscellaneous Commands:: A few commands that defy categories. * Variables:: How to change the default behavior of Info. * GNU Info Global Index:: Global index containing keystrokes, command names, variable names, and general concepts. @end menu @node What is Info, Options, Top, Top @chapter What is Info? @iftex This file documents GNU Info, a program for viewing the on-line formatted versions of Texinfo files, version @value{InfoProgVer}. @end iftex @dfn{Info} is a program which is used to view Info files on an ASCII terminal. @dfn{Info files} are the result of processing Texinfo files with the program @code{makeinfo} or with one of the Emacs commands, such as @code{M-x texinfo-format-buffer}. Texinfo itself is a documentation system that uses a single source file to produce both on-line information and printed output. You can typeset and print the files that you read in Info.@refill @node Options, Cursor Commands, What is Info, Top @chapter Command Line Options @cindex command line options @cindex arguments, command line GNU Info accepts several options to control the initial node being viewed, and to specify which directories to search for Info files. Here is a template showing an invocation of GNU Info from the shell: @example info [--@var{option-name} @var{option-value}] @var{menu-item}@dots{} @end example The following @var{option-names} are available when invoking Info from the shell: @table @code @cindex directory path @item --directory @var{directory-path} @itemx -d @var{directory-path} Add @var{directory-path} to the list of directory paths searched when Info needs to find a file. You may issue @code{--directory} multiple times; once for each directory which contains Info files. Alternatively, you may specify a value for the environment variable @code{INFOPATH}; if @code{--directory} is not given, the value of @code{INFOPATH} is used. The value of @code{INFOPATH} is a colon separated list of directory names. If you do not supply @code{INFOPATH} or @code{--directory-path}, Info uses a default path. @item --file @var{filename} @itemx -f @var{filename} @cindex Info file, selecting Specify a particular Info file to visit. By default, Info visits the file @code{dir}; if you use this option, Info will start with @code{(@var{filename})Top} as the first file and node. @item --node @var{nodename} @itemx -n @var{nodename} @cindex node, selecting Specify a particular node to visit in the initial file that Info loads. This is especially useful in conjunction with @code{--file}@footnote{Of course, you can specify both the file and node in a @code{--node} command; but don't forget to escape the open and close parentheses from the shell as in: @code{info --node "(emacs)Buffers"}}. You may specify @code{--node} multiple times; for an interactive Info, each @var{nodename} is visited in its own window, for a non-interactive Info (such as when @code{--output} is given) each @var{nodename} is processed sequentially. @item --output @var{filename} @itemx -o @var{filename} @cindex file, outputting to @cindex outputting to a file Specify @var{filename} as the name of a file to which to direct output. Each node that Info visits will be output to @var{filename} instead of interactively viewed. A value of @code{-} for @var{filename} specifies the standard output. @item --subnodes @cindex @code{--subnodes}, command line option This option only has meaning when given in conjunction with @code{--output}. It means to recursively output the nodes appearing in the menus of each node being output. Menu items which resolve to external Info files are not output, and neither are menu items which are members of an index. Each node is only output once. @item --help @itemx -h Produces a relatively brief description of the available Info options. @item --version @cindex version information Prints the version information of Info and exits. @item @var{menu-item} @cindex menu, following Info treats its remaining arguments as the names of menu items. The first argument is a menu item in the initial node visited, while the second argument is a menu item in the first argument's node. You can easily move to the node of your choice by specifying the menu names which describe the path to that node. For example, @example info emacs buffers @end example @noindent first selects the menu item @samp{Emacs} in the node @samp{(dir)Top}, and then selects the menu item @samp{Buffers} in the node @samp{(emacs)Top}. @end table @node Cursor Commands, Scrolling Commands, Options, Top @chapter Moving the Cursor @cindex cursor, moving Many people find that reading screens of text page by page is made easier when one is able to indicate particular pieces of text with some kind of pointing device. Since this is the case, GNU Info (both the Emacs and standalone versions) have several commands which allow you to move the cursor about the screen. The notation used in this manual to describe keystrokes is identical to the notation used within the Emacs manual, and the GNU Readline manual. @xref{Characters, , Character Conventions, emacs, the GNU Emacs Manual}, if you are unfamiliar with the notation. The following table lists the basic cursor movement commands in Info. Each entry consists of the key sequence you should type to execute the cursor movement, the @code{M-x}@footnote{@code{M-x} is also a command; it invokes @code{execute-extended-command}. @xref{M-x, , Executing an extended command, emacs, the GNU Emacs Manual}, for more detailed information.} command name (displayed in parentheses), and a short description of what the command does. All of the cursor motion commands can take an @dfn{numeric} argument (@pxref{Miscellaneous Commands, @code{universal-argument}}), to find out how to supply them. With a numeric argument, the motion commands are simply executed that many times; for example, a numeric argument of 4 given to @code{next-line} causes the cursor to move down 4 lines. With a negative numeric argument, the motion is reversed; an argument of -4 given to the @code{next-line} command would cause the cursor to move @emph{up} 4 lines. @table @asis @item @code{C-n} (@code{next-line}) @kindex C-n @findex next-line Move the cursor down to the next line. @item @code{C-p} (@code{prev-line}) @kindex C-p @findex prev-line Move the cursor up to the previous line. @item @code{C-a} (@code{beginning-of-line}) @kindex C-a, in Info windows @findex beginning-of-line Move the cursor to the start of the current line. @item @code{C-e} (@code{end-of-line}) @kindex C-e, in Info windows @findex end-of-line Move the cursor to the end of the current line. @item @code{C-f} (@code{forward-char}) @kindex C-f, in Info windows @findex forward-char Move the cursor forward a character. @item @code{C-b} (@code{backward-char}) @kindex C-b, in Info windows @findex backward-char Move the cursor backward a character. @item @code{M-f} (@code{forward-word}) @kindex M-f, in Info windows @findex forward-word Move the cursor forward a word. @item @code{M-b} (@code{backward-word}) @kindex M-b, in Info windows @findex backward-word Move the cursor backward a word. @item @code{M-<} (@code{beginning-of-node}) @itemx @code{b} @kindex b, in Info windows @kindex M-< @findex beginning-of-node Move the cursor to the start of the current node. @item @code{M->} (@code{end-of-node}) @kindex M-> @findex end-of-node Move the cursor to the end of the current node. @item @code{M-r} (@code{move-to-window-line}) @kindex M-r @findex move-to-window-line Move the cursor to a specific line of the window. Without a numeric argument, @code{M-r} moves the cursor to the start of the line in the center of the window. With a numeric argument of @var{n}, @code{M-r} moves the cursor to the start of the @var{n}th line in the window. @end table @node Scrolling Commands, Node Commands, Cursor Commands, Top @chapter Moving Text Within a Window @cindex scrolling Sometimes you are looking at a screenful of text, and only part of the current paragraph you are reading is visible on the screen. The commands detailed in this section are used to shift which part of the current node is visible on the screen. @table @asis @item @code{SPC} (@code{scroll-forward}) @itemx @code{C-v} @kindex SPC, in Info windows @kindex C-v @findex scroll-forward Shift the text in this window up. That is, show more of the node which is currently below the bottom of the window. With a numeric argument, show that many more lines at the bottom of the window; a numeric argument of 4 would shift all of the text in the window up 4 lines (discarding the top 4 lines), and show you four new lines at the bottom of the window. Without a numeric argument, @key{SPC} takes the bottom two lines of the window and places them at the top of the window, redisplaying almost a completely new screenful of lines. @item @code{DEL} (@code{scroll-backward}) @itemx @code{M-v} @kindex DEL, in Info windows @kindex M-v @findex scroll-backward Shift the text in this window down. The inverse of @code{scroll-forward}. @end table @cindex scrolling through node structure The @code{scroll-forward} and @code{scroll-backward} commands can also move forward and backward through the node structure of the file. If you press @key{SPC} while viewing the end of a node, or @key{DEL} while viewing the beginning of a node, what happens is controlled by the variable @code{scroll-behavior}. @xref{Variables, @code{scroll-behavior}}, for more information. @table @asis @item @code{C-l} (@code{redraw-display}) @kindex C-l @findex redraw-display Redraw the display from scratch, or shift the line containing the cursor to a specified location. With no numeric argument, @samp{C-l} clears the screen, and then redraws its entire contents. Given a numeric argument of @var{n}, the line containing the cursor is shifted so that it is on the @var{n}th line of the window. @item @code{C-x w} (@code{toggle-wrap}) @kindex C-w @findex toggle-wrap Toggles the state of line wrapping in the current window. Normally, lines which are longer than the screen width @dfn{wrap}, i.e., they are continued on the next line. Lines which wrap have a @samp{\} appearing in the rightmost column of the screen. You can cause such lines to be terminated at the rightmost column by changing the state of line wrapping in the window with @code{C-x w}. When a line which needs more space than one screen width to display is displayed, a @samp{$} appears in the rightmost column of the screen, and the remainder of the line is invisible. @end table @node Node Commands, Searching Commands, Scrolling Commands, Top @chapter Selecting a New Node @cindex nodes, selection of This section details the numerous Info commands which select a new node to view in the current window. The most basic node commands are @samp{n}, @samp{p}, @samp{u}, and @samp{l}. When you are viewing a node, the top line of the node contains some Info @dfn{pointers} which describe where the next, previous, and up nodes are. Info uses this line to move about the node structure of the file when you use the following commands: @table @asis @item @code{n} (@code{next-node}) @kindex n @findex next-node Select the `Next' node. @item @code{p} (@code{prev-node}) @kindex p @findex prev-node Select the `Prev' node. @item @code{u} (@code{up-node}) @kindex u @findex up-node Select the `Up' node. @end table You can easily select a node that you have already viewed in this window by using the @samp{l} command -- this name stands for "last", and actually moves through the list of already visited nodes for this window. @samp{l} with a negative numeric argument moves forward through the history of nodes for this window, so you can quickly step between two adjacent (in viewing history) nodes. @table @asis @item @code{l} (@code{history-node}) @kindex l @findex history-node Select the most recently selected node in this window. @end table Two additional commands make it easy to select the most commonly selected nodes; they are @samp{t} and @samp{d}. @table @asis @item @code{t} (@code{top-node}) @kindex t @findex top-node Select the node @samp{Top} in the current Info file. @item @code{d} (@code{dir-node}) @kindex d @findex dir-node Select the directory node (i.e., the node @samp{(dir)}). @end table Here are some other commands which immediately result in the selection of a different node in the current window: @table @asis @item @code{<} (@code{first-node}) @kindex < @findex first-node Selects the first node which appears in this file. This node is most often @samp{Top}, but it does not have to be. @item @code{>} (@code{last-node}) @kindex > @findex last-node Select the last node which appears in this file. @item @code{]} (@code{global-next-node}) @kindex ] @findex global-next-node Move forward or down through node structure. If the node that you are currently viewing has a @samp{Next} pointer, that node is selected. Otherwise, if this node has a menu, the first menu item is selected. If there is no @samp{Next} and no menu, the same process is tried with the @samp{Up} node of this node. @item @code{[} (@code{global-prev-node}) @kindex [ @findex global-prev-node Move backward or up through node structure. If the node that you are currently viewing has a @samp{Prev} pointer, that node is selected. Otherwise, if the node has an @samp{Up} pointer, that node is selected, and if it has a menu, the last item in the menu is selected. @end table You can get the same behavior as @code{global-next-node} and @code{global-prev-node} while simply scrolling through the file with @key{SPC} and @key{DEL}; @xref{Variables, @code{scroll-behavior}}, for more information. @table @asis @item @code{g} (@code{goto-node}) @kindex g @findex goto-node Read the name of a node and select it. No completion is done while reading the node name, since the desired node may reside in a separate file. The node must be typed exactly as it appears in the Info file. A file name may be included as with any node specification, for example @example @code{g(emacs)Buffers} @end example finds the node @samp{Buffers} in the Info file @file{emacs}. @item @code{C-x k} (@code{kill-node}) @kindex C-x k @findex kill-node Kill a node. The node name is prompted for in the echo area, with a default of the current node. @dfn{Killing} a node means that Info tries hard to forget about it, removing it from the list of history nodes kept for the window where that node is found. Another node is selected in the window which contained the killed node. @item @code{C-x C-f} (@code{view-file}) @kindex C-x C-f @findex view-file Read the name of a file and selects the entire file. The command @example @code{C-x C-f @var{filename}} @end example is equivalent to typing @example @code{g(@var{filename})*} @end example @item @code{C-x C-b} (@code{list-visited-nodes}) @kindex C-x C-b @findex list-visited-nodes Make a window containing a menu of all of the currently visited nodes. This window becomes the selected window, and you may use the standard Info commands within it. @item @code{C-x b} (@code{select-visited-node}) @kindex C-x b @findex select-visited-node Select a node which has been previously visited in a visible window. This is similar to @samp{C-x C-b} followed by @samp{m}, but no window is created. @end table @node Searching Commands, Xref Commands, Node Commands, Top @chapter Searching an Info File @cindex searching GNU Info allows you to search for a sequence of characters throughout an entire Info file, search through the indices of an Info file, or find areas within an Info file which discuss a particular topic. @table @asis @item @code{s} (@code{search}) @kindex s @findex search Read a string in the echo area and search for it. @item @code{C-s} (@code{isearch-forward}) @kindex C-s @findex isearch-forward Interactively search forward through the Info file for a string as you type it. @item @code{C-r} (@code{isearch-backward}) @kindex C-r @findex isearch-backward Interactively search backward through the Info file for a string as you type it. @item @code{i} (@code{index-search}) @kindex i @findex index-search Look up a string in the indices for this Info file, and select a node where the found index entry points to. @item @code{,} (@code{next-index-match}) @kindex , @findex next-index-match Move to the node containing the next matching index item from the last @samp{i} command. @end table The most basic searching command is @samp{s} (@code{search}). The @samp{s} command prompts you for a string in the echo area, and then searches the remainder of the Info file for an occurrence of that string. If the string is found, the node containing it is selected, and the cursor is left positioned at the start of the found string. Subsequent @samp{s} commands show you the default search string within @samp{[} and @samp{]}; pressing @key{RET} instead of typing a new string will use the default search string. @dfn{Incremental searching} is similar to basic searching, but the string is looked up while you are typing it, instead of waiting until the entire search string has been specified. @node Xref Commands, Window Commands, Searching Commands, Top @chapter Selecting Cross References We have already discussed the @samp{Next}, @samp{Prev}, and @samp{Up} pointers which appear at the top of a node. In addition to these pointers, a node may contain other pointers which refer you to a different node, perhaps in another Info file. Such pointers are called @dfn{cross references}, or @dfn{xrefs} for short. @menu * Parts of an Xref:: What a cross reference is made of. * Selecting Xrefs:: Commands for selecting menu or note items. @end menu @node Parts of an Xref, Selecting Xrefs, , Xref Commands @section Parts of an Xref Cross references have two major parts: the first part is called the @dfn{label}; it is the name that you can use to refer to the cross reference, and the second is the @dfn{target}; it is the full name of the node that the cross reference points to. The target is separated from the label by a colon @samp{:}; first the label appears, and then the target. For example, in the sample menu cross reference below, the single colon separates the label from the target. @example * Foo Label: Foo Target. More information about Foo. @end example Note the @samp{.} which ends the name of the target. The @samp{.} is not part of the target; it serves only to let Info know where the target name ends. A shorthand way of specifying references allows two adjacent colons to stand for a target name which is the same as the label name: @example * Foo Commands:: Commands pertaining to Foo. @end example In the above example, the name of the target is the same as the name of the label, in this case @code{Foo Commands}. You will normally see two types of cross reference while viewing nodes: @dfn{menu} references, and @dfn{note} references. Menu references appear within a node's menu; they begin with a @samp{*} at the beginning of a line, and continue with a label, a target, and a comment which describes what the contents of the node pointed to contains. Note references appear within the body of the node text; they begin with @code{*Note}, and continue with a label and a target. Like @samp{Next}, @samp{Prev}, and @samp{Up} pointers, cross references can point to any valid node. They are used to refer you to a place where more detailed information can be found on a particular subject. Here is a cross reference which points to a node within the Texinfo documentation: @xref{xref, , Writing an Xref, texinfo, the Texinfo Manual}, for more information on creating your own texinfo cross references. @node Selecting Xrefs, , Parts of an Xref, Xref Commands @section Selecting Xrefs The following table lists the Info commands which operate on menu items. @table @asis @item @code{1} (@code{menu-digit}) @itemx @code{2} @dots{} @code{9} @cindex 1 @dots{} 9, in Info windows @kindex 1 @dots{} 9, in Info windows @findex menu-digit Within an Info window, pressing a single digit, (such as @samp{1}), selects that menu item, and places its node in the current window. For convenience, there is one exception; pressing @samp{0} selects the @emph{last} item in the node's menu. @item @code{0} (@code{last-menu-item}) @kindex 0, in Info windows @findex last-menu-item Select the last item in the current node's menu. @item @code{m} (@code{menu-item}) @kindex m @findex menu-item Reads the name of a menu item in the echo area and selects its node. Completion is available while reading the menu label. @item @code{M-x find-menu} @findex find-menu Move the cursor to the start of this node's menu. @end table This table lists the Info commands which operate on note cross references. @table @asis @item @code{f} (@code{xref-item}) @itemx @code{r} @kindex f @kindex r @findex xref-item Reads the name of a note cross reference in the echo area and selects its node. Completion is available while reading the cross reference label. @end table Finally, the next few commands operate on menu or note references alike: @table @asis @item @code{TAB} (@code{move-to-next-xref}) @kindex TAB, in Info windows @findex move-to-next-xref Move the cursor to the start of the next nearest menu item or note reference in this node. You can then use @key{RET} (@code{select-reference-this-line}) to select the menu or note reference. @item @code{M-TAB} (@code{move-to-prev-xref}) @kindex M-TAB, in Info windows @findex move-to-prev-xref Move the cursor the start of the nearest previous menu item or note reference in this node. @item @code{RET} (@code{select-reference-this-line}) @kindex RET, in Info windows @findex select-reference-this-line Select the menu item or note reference appearing on this line. @end table @node Window Commands, Printing Nodes, Xref Commands, Top @chapter Manipulating Multiple Windows @cindex windows, manipulating A @dfn{window} is a place to show the text of a node. Windows have a view area where the text of the node is displayed, and an associated @dfn{mode line}, which briefly describes the node being viewed. GNU Info supports multiple windows appearing in a single screen; each window is separated from the next by its modeline. At any time, there is only one @dfn{active} window, that is, the window in which the cursor appears. There are commands available for creating windows, changing the size of windows, selecting which window is active, and for deleting windows. @menu * The Mode Line:: What appears in the mode line? * Basic Windows:: Manipulating windows in Info. * The Echo Area:: Used for displaying errors and reading input. @end menu @node The Mode Line, Basic Windows, , Window Commands @section The Mode Line A @dfn{mode line} is a line of inverse video which appears at the bottom of an Info window. It describes the contents of the window just above it; this information includes the name of the file and node appearing in that window, the number of screen lines it takes to display the node, and the percentage of text that is above the top of the window. It can also tell you if the indirect tags table for this Info file needs to be updated, and whether or not the Info file was compressed when stored on disk. Here is a sample mode line for a window containing an uncompressed file named @file{dir}, showing the node @samp{Top}. @example @group -----Info: (dir)Top, 40 lines --Top--------------------------------------- ^^ ^ ^^^ ^^ (file)Node #lines where @end group @end example When a node comes from a file which is compressed on disk, this is indicated in the mode line with two small @samp{z}'s. In addition, if the Info file containing the node has been split into subfiles, the name of the subfile containing the node appears in the modeline as well: @example --zz-Info: (emacs)Top, 291 lines --Top-- Subfile: emacs-1.Z--------------- @end example When Info makes a node internally, such that there is no corresponding info file on disk, the name of the node is surrounded by asterisks (@samp{*}). The name itself tells you what the contents of the window are; the sample mode line below shows an internally constructed node showing possible completions: @example -----Info: *Completions*, 7 lines --All----------------------------------- @end example @node Basic Windows, The Echo Area, The Mode Line, Window Commands @section Window Commands It can be convenient to view more than one node at a time. To allow this, Info can display more than one @dfn{window}. Each window has its own mode line (@pxref{The Mode Line}) and history of nodes viewed in that window (@pxref{Node Commands, , @code{history-node}}). @table @asis @item @code{C-x o} (@code{next-window}) @cindex windows, selecting @kindex C-x o @findex next-window Select the next window on the screen. Note that the echo area can only be selected if it is already in use, and you have left it temporarily. Normally, @samp{C-x o} simply moves the cursor into the next window on the screen, or if you are already within the last window, into the first window on the screen. Given a numeric argument, @samp{C-x o} moves over that many windows. A negative argument causes @samp{C-x o} to select the previous window on the screen. @item @code{M-x prev-window} @findex prev-window Select the previous window on the screen. This is identical to @samp{C-x o} with a negative argument. @item @code{C-x 2} (@code{split-window}) @cindex windows, creating @kindex C-x 2 @findex split-window Split the current window into two windows, both showing the same node. Each window is one half the size of the original window, and the cursor remains in the original window. The variable @code{automatic-tiling} can cause all of the windows on the screen to be resized for you automatically, please @pxref{Variables, , automatic-tiling} for more information. @item @code{C-x 0} (@code{delete-window}) @cindex windows, deleting @kindex C-x 0 @findex delete-window Delete the current window from the screen. If you have made too many windows and your screen appears cluttered, this is the way to get rid of some of them. @item @code{C-x 1} (@code{keep-one-window}) @kindex C-x 1 @findex keep-one-window Delete all of the windows excepting the current one. @item @code{ESC C-v} (@code{scroll-other-window}) @kindex ESC C-v, in Info windows @findex scroll-other-window Scroll the other window, in the same fashion that @samp{C-v} might scroll the current window. Given a negative argument, scroll the "other" window backward. @item @code{C-x ^} (@code{grow-window}) @kindex C-x ^ @findex grow-window Grow (or shrink) the current window. Given a numeric argument, grow the current window that many lines; with a negative numeric argument, shrink the window instead. @item @code{C-x t} (@code{tile-windows}) @cindex tiling @kindex C-x t @findex tile-windows Divide the available screen space among all of the visible windows. Each window is given an equal portion of the screen in which to display its contents. The variable @code{automatic-tiling} can cause @code{tile-windows} to be called when a window is created or deleted. @xref{Variables, , @code{automatic-tiling}}. @end table @node The Echo Area, , Basic Windows, Window Commands @section The Echo Area @cindex echo area The @dfn{echo area} is a one line window which appears at the bottom of the screen. It is used to display informative or error messages, and to read lines of input from you when that is necessary. Almost all of the commands available in the echo area are identical to their Emacs counterparts, so please refer to that documentation for greater depth of discussion on the concepts of editing a line of text. The following table briefly lists the commands that are available while input is being read in the echo area: @table @asis @item @code{C-f} (@code{echo-area-forward}) @kindex C-f, in the echo area @findex echo-area-forward Move forward a character. @item @code{C-b} (@code{echo-area-backward}) @kindex C-b, in the echo area @findex echo-area-backward Move backward a character. @item @code{C-a} (@code{echo-area-beg-of-line}) @kindex C-a, in the echo area @findex echo-area-beg-of-line Move to the start of the input line. @item @code{C-e} (@code{echo-area-end-of-line}) @kindex C-e, in the echo area @findex echo-area-end-of-line Move to the end of the input line. @item @code{M-f} (@code{echo-area-forward-word}) @kindex M-f, in the echo area @findex echo-area-forward-word Move forward a word. @item @code{M-b} (@code{echo-area-backward-word}) @kindex M-b, in the echo area @findex echo-area-backward-word Move backward a word. @item @code{C-d} (@code{echo-area-delete}) @kindex C-d, in the echo area @findex echo-area-delete Delete the character under the cursor. @item @code{DEL} (@code{echo-area-rubout}) @kindex DEL, in the echo area @findex echo-area-rubout Delete the character behind the cursor. @item @code{C-g} (@code{echo-area-abort}) @kindex C-g, in the echo area @findex echo-area-abort Cancel or quit the current operation. If completion is being read, @samp{C-g} discards the text of the input line which does not match any completion. If the input line is empty, @samp{C-g} aborts the calling function. @item @code{RET} (@code{echo-area-newline}) @kindex RET, in the echo area @findex echo-area-newline Accept (or forces completion of) the current input line. @item @code{C-q} (@code{echo-area-quoted-insert}) @kindex C-q, in the echo area @findex echo-area-quoted-insert Insert the next character verbatim. This is how you can insert control characters into a search string, for example. @item @var{printing character} (@code{echo-area-insert}) @kindex printing characters, in the echo area @findex echo-area-insert Insert the character. @item @code{M-TAB} (@code{echo-area-tab-insert}) @kindex M-TAB, in the echo area @findex echo-area-tab-insert Insert a TAB character. @item @code{C-t} (@code{echo-area-transpose-chars}) @kindex C-t, in the echo area @findex echo-area-transpose-chars Transpose the characters at the cursor. @end table The next group of commands deal with @dfn{killing}, and @dfn{yanking} text. For an in depth discussion of killing and yanking, @pxref{Killing, , Killing and Deleting, emacs, the GNU Emacs Manual} @table @asis @item @code{M-d} (@code{echo-area-kill-word}) @kindex M-d, in the echo area @findex echo-area-kill-word Kill the word following the cursor. @item @code{M-DEL} (@code{echo-area-backward-kill-word}) @kindex M-DEL, in the echo area @findex echo-area-backward-kill-word Kill the word preceding the cursor. @item @code{C-k} (@code{echo-area-kill-line}) @kindex C-k, in the echo area @findex echo-area-kill-line Kill the text from the cursor to the end of the line. @item @code{C-x DEL} (@code{echo-area-backward-kill-line}) @kindex C-x DEL, in the echo area @findex echo-area-backward-kill-line Kill the text from the cursor to the beginning of the line. @item @code{C-y} (@code{echo-area-yank}) @kindex C-y, in the echo area @findex echo-area-yank Yank back the contents of the last kill. @item @code{M-y} (@code{echo-area-yank-pop}) @kindex M-y, in the echo area @findex echo-area-yank-pop Yank back a previous kill, removing the last yanked text first. @end table Sometimes when reading input in the echo area, the command that needed input will only accept one of a list of several choices. The choices represent the @dfn{possible completions}, and you must respond with one of them. Since there are a limited number of responses you can make, Info allows you to abbreviate what you type, only typing as much of the response as is necessary to uniquely identify it. In addition, you can request Info to fill in as much of the response as is possible; this is called @dfn{completion}. The following commands are available when completing in the echo area: @table @asis @item @code{TAB} (@code{echo-area-complete}) @itemx @code{SPC} @kindex TAB, in the echo area @kindex SPC, in the echo area @findex echo-area-complete Insert as much of a completion as is possible. @item @code{?} (@code{echo-area-possible-completions}) @kindex ?, in the echo area @findex echo-area-possible-completions Display a window containing a list of the possible completions of what you have typed so far. For example, if the available choices are: @example @group bar foliate food forget @end group @end example @noindent and you have typed an @samp{f}, followed by @samp{?}, the possible completions would contain: @example @group foliate food forget @end group @end example @noindent i.e., all of the choices which begin with @samp{f}. Pressing @key{SPC} or @key{TAB} would result in @samp{fo} appearing in the echo area, since all of the choices which begin with @samp{f} continue with @samp{o}. Now, typing @samp{l} followed by @samp{TAB} results in @samp{foliate} appearing in the echo area, since that is the only choice which begins with @samp{fol}. @item @code{ESC C-v} (@code{echo-area-scroll-completions-window}) @kindex ESC C-v, in the echo area @findex echo-area-scroll-completions-window Scroll the completions window, if that is visible, or the "other" window if not. @end table @node Printing Nodes, Miscellaneous Commands, Window Commands, Top @chapter Printing Out Nodes @cindex printing You may wish to print out the contents of a node as a quick reference document for later use. Info provides you with a command for doing this. In general, we recommend that you use @TeX{} to format the document and print sections of it, by running @code{tex} on the Texinfo source file. @table @asis @item @code{M-x print-node} @findex print-node @cindex INFO_PRINT_COMMAND, environment variable Pipe the contents of the current node through the command in the environment variable @code{INFO_PRINT_COMMAND}. If the variable does not exist, the node is simply piped to @code{lpr}. @end table @node Miscellaneous Commands, Variables, Printing Nodes, Top @chapter Miscellaneous Commands GNU Info contains several commands which self-document GNU Info: @table @asis @item @code{M-x describe-command} @cindex functions, describing @cindex commands, describing @findex describe-command Read the name of an Info command in the echo area and then display a brief description of what that command does. @item @code{M-x describe-key} @cindex keys, describing @findex describe-key Read a key sequence in the echo area, and then display the name and documentation of the Info command that the key sequence invokes. @item @code{M-x describe-variable} Read the name of a variable in the echo area and then display a brief description of what the variable affects. @item @code{M-x where-is} @findex where-is Read the name of an Info command in the echo area, and then display a key sequence which can be typed in order to invoke that command. @item @code{C-h} (@code{get-help-window}) @itemx @code{?} @kindex C-h @kindex ?, in Info windows @findex get-help-window Create (or Move into) the window displaying @code{*Help*}, and place a node containing a quick reference card into it. This window displays the most concise information about GNU Info available. @item @code{h} (@code{get-info-help-node}) @kindex h @findex get-info-help-node Try hard to visit the node @code{(info)Help}. The Info file @file{info.texi} distributed with GNU Info contains this node. Of course, the file must first be processed with @code{makeinfo}, and then placed into the location of your Info directory. @end table Here are the commands for creating a numeric argument: @table @asis @item @code{C-u} (@code{universal-argument}) @cindex numeric arguments @kindex C-u @findex universal-argument Start (or multiply by 4) the current numeric argument. @samp{C-u} is a good way to give a small numeric argument to cursor movement or scrolling commands; @samp{C-u C-v} scrolls the screen 4 lines, while @samp{C-u C-u C-n} moves the cursor down 16 lines. @item @code{M-1} (@code{add-digit-to-numeric-arg}) @itemx @code{M-2} @dots{} @code{M-9} @kindex M-1 @dots{} M-9 @findex add-digit-to-numeric-arg Add the digit value of the invoking key to the current numeric argument. Once Info is reading a numeric argument, you may just type the digits of the argument, without the Meta prefix. For example, you might give @samp{C-l} a numeric argument of 32 by typing: @example @kbd{C-u 3 2 C-l} @end example @noindent or @example @kbd{M-3 2 C-l} @end example @end table @samp{C-g} is used to abort the reading of a multi-character key sequence, to cancel lengthy operations (such as multi-file searches) and to cancel reading input in the echo area. @table @asis @item @code{C-g} (@code{abort-key}) @cindex cancelling typeahead @cindex cancelling the current operation @kindex C-g, in Info windows @findex abort-key Cancel current operation. @end table The @samp{q} command of Info simply quits running Info. @table @asis @item @code{q} (@code{quit}) @cindex quitting @kindex q @findex quit Exit GNU Info. @end table If the operating system tells GNU Info that the screen is 60 lines tall, and it is actually only 40 lines tall, here is a way to tell Info that the operating system is correct. @table @asis @item @code{M-x set-screen-height} @findex set-screen-height @cindex screen, changing the height of Read a height value in the echo area and set the height of the displayed screen to that value. @end table Finally, Info provides a convenient way to display footnotes which might be associated with the current node that you are viewing: @table @asis @item @code{ESC C-f} (@code{show-footnotes}) @kindex ESC C-f @findex show-footnotes @cindex footnotes, displaying Show the footnotes (if any) associated with the current node in another window. You can have Info automatically display the footnotes associated with a node when the node is selected by setting the variable @code{automatic-footnotes}. @xref{Variables, , @code{automatic-footnotes}}. @end table @node Variables, GNU Info Global Index, Miscellaneous Commands, Top @chapter Manipulating Variables GNU Info contains several @dfn{variables} whose values are looked at by various Info commands. You can change the values of these variables, and thus change the behavior of Info to more closely match your environment and Info file reading manner. @table @asis @item @code{M-x set-variable} @cindex variables, setting @findex set-variable Read the name of a variable, and the value for it, in the echo area and then set the variable to that value. Completion is available when reading the variable name; often, completion is available when reading the value to give to the variable, but that depends on the variable itself. If a variable does @emph{not} supply multiple choices to complete over, it expects a numeric value. @item @code{M-x describe-variable} @cindex variables, describing @findex describe-variable Read the name of a variable in the echo area and then display a brief description of what the variable affects. @end table Here is a list of the variables that you can set in Info. @table @code @item automatic-footnotes @vindex automatic-footnotes When set to @code{On}, footnotes appear and disappear automatically. This variable is @code{On} by default. When a node is selected, a window containing the footnotes which appear in that node is created, and the footnotes are displayed within the new window. The window that Info creates to contain the footnotes is called @samp{*Footnotes*}. If a node is selected which contains no footnotes, and a @samp{*Footnotes*} window is on the screen, the @samp{*Footnotes*} window is deleted. Footnote windows created in this fashion are not automatically tiled so that they can use as little of the display as is possible. @item automatic-tiling @vindex automatic-tiling When set to @code{On}, creating or deleting a window resizes other windows. This variable is @code{Off} by default. Normally, typing @samp{C-x 2} divides the current window into two equal parts. When @code{automatic-tiling} is set to @code{On}, all of the windows are resized automatically, keeping an equal number of lines visible in each window. There are exceptions to the automatic tiling; specifically, the windows @samp{*Completions*} and @samp{*Footnotes*} are @emph{not} resized through automatic tiling; they remain their original size. @item visible-bell @vindex visible-bell When set to @code{On}, GNU Info attempts to flash the screen instead of ringing the bell. This variable is @code{Off} by default. Of course, Info can only flash the screen if the terminal allows it; in the case that the terminal does not allow it, the setting of this variable has no effect. However, you can make Info perform quietly by setting the @code{errors-ring-bell} variable to @code{Off}. @item errors-ring-bell @vindex errors-ring-bell When set to @code{On}, errors cause the bell to ring. The default setting of this variable is @code{On}. @item gc-compressed-files @vindex gc-compressed-files When set to @code{On}, Info garbage collects files which had to be uncompressed. The default value of this variable is @code{Off}. Whenever a node is visited in Info, the Info file containing that node is read into core, and Info reads information about the tags and nodes contained in that file. Once the tags information is read by Info, it is never forgotten. However, the actual text of the nodes does not need to remain in core unless a particular Info window needs it. For non-compressed files, the text of the nodes does not remain in core when it is no longer in use. But de-compressing a file can be a time consuming operation, and so Info tries hard not to do it twice. @code{gc-compressed-files} tells Info it is okay to garbage collect the text of the nodes of a file which was compressed on disk. @item show-index-match @vindex show-index-match When set to @code{On}, the portion of the matched search string is highlighted in the message which explains where the matched search string was found. The default value of this variable is @code{On}. When Info displays the location where an index match was found, (@pxref{Searching Commands, , @code{next-index-match}}), the portion of the string that you had typed is highlighted by displaying it in the inverse case from its surrounding characters. @item scroll-behavior @vindex scroll-behavior Control what happens when forward scrolling is requested at the end of a node, or when backward scrolling is requested at the beginning of a node. The default value for this variable is @code{Continuous}. There are three possible values for this variable: @table @code @item Continuous Try to get the first item in this node's menu, or failing that, the @samp{Next} node, or failing that, the @samp{Next} of the @samp{Up}. This behavior is identical to using the @samp{]} (@code{global-next-node}) and @samp{[} (@code{global-prev-node}) commands. @item Next Only Only try to get the @samp{Next} node. @item Page Only Simply give up, changing nothing. If @code{scroll-behavior} is @code{Page Only}, no scrolling command can change the node that is being viewed. @end table @item scroll-step @vindex scroll-step The number of lines to scroll when the cursor moves out of the window. Scrolling happens automatically if the cursor has moved out of the visible portion of the node text when it is time to display. Usually the scrolling is done so as to put the cursor on the center line of the current window. However, if the variable @code{scroll-step} has a nonzero value, Info attempts to scroll the node text by that many lines; if that is enough to bring the cursor back into the window, that is what is done. The default value of this variable is 0, thus placing the cursor (and the text it is attached to) in the center of the window. Setting this variable to 1 causes a kind of "smooth scrolling" which some people prefer. @item ISO-Latin @cindex ISO Latin characters @vindex ISO-Latin When set to @code{On}, Info accepts and displays ISO Latin characters. By default, Info assumes an ASCII character set. @code{ISO-Latin} tells Info that it is running in an environment where the European standard character set is in use, and allows you to input such characters to Info, as well as display them. @end table @c the following is incomplete @ignore @c node Info for Sys Admins @c chapter Info for System Administrators This text describes some common ways of setting up an Info hierarchy from scratch, and details the various options that are available when installing Info. This text is designed for the person who is installing GNU Info on the system; although users may find the information present in this section interesting, none of it is vital to understanding how to use GNU Info. @menu * Setting the INFOPATH:: Where are my Info files kept? * Editing the DIR node:: What goes in `DIR', and why? * Storing Info files:: Alternate formats allow flexibility in setups. * Using `localdir':: Building DIR on the fly. * Example setups:: Some common ways to organize Info files. @end menu @c node Setting the INFOPATH @c section Setting the INFOPATH Where are my Info files kept? @c node Editing the DIR node @c section Editing the DIR node What goes in `DIR', and why? @c node Storing Info files @c section Storing Info files Alternate formats allow flexibility in setups. @c node Using `localdir' @c section Using `localdir' Building DIR on the fly. @c node Example setups @c section Example setups Some common ways to organize Info files. @end ignore @node GNU Info Global Index, , Variables, Top @appendix Global Index @printindex cp @contents @bye