summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorRoger Quadros <rogerq@ti.com>2015-07-17 16:47:22 +0300
committerKishon Vijay Abraham I <kishon@ti.com>2015-08-01 15:52:58 +0530
commitc934b3612747bde6c81cf10c2bbde956c6690aec (patch)
tree548ab499e4d7646675aa9b15558efd29713ec8fe /Documentation
parent7167bf8b7f3f19eeea4602ccc39f26a26a636d8e (diff)
phy: ti-pipe3: i783 workaround for SATA lockup after dpll unlock/relock
SATA_PLL_SOFT_RESET bit of CTRL_CORE_SMA_SW_0 must be toggled between a SATA DPLL unlock and re-lock to prevent SATA lockup. Introduce a new DT parameter 'syscon-pllreset' to provide the syscon regmap access to this register which sits in the control module. If the register is not provided we fallback to the old behaviour i.e. SATA DPLL refclk will not be disabled and we prevent SoC low power states. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/phy/ti-phy.txt16
1 files changed, 16 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 305e3df3d9b1..9cf9446eaf2e 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -82,6 +82,9 @@ Optional properties:
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
+ - syscon-pllreset: Handle to system control region that contains the
+ CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
+ register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
This is usually a subnode of ocp2scp to which it is connected.
@@ -100,3 +103,16 @@ usb3phy@4a084400 {
"sysclk",
"refclk";
};
+
+sata_phy: phy@4A096000 {
+ compatible = "ti,phy-pipe3-sata";
+ reg = <0x4A096000 0x80>, /* phy_rx */
+ <0x4A096400 0x64>, /* phy_tx */
+ <0x4A096800 0x40>; /* pll_ctrl */
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_sata>;
+ clocks = <&sys_clkin1>, <&sata_ref_clk>;
+ clock-names = "sysclk", "refclk";
+ syscon-pllreset = <&scm_conf 0x3fc>;
+ #phy-cells = <0>;
+};