powerpc/mpc8xxx: Add memory reset control

JEDEC spec requires the clocks to be stable before deasserting reset
signal for RDIMMs. Clocks start when any chip select is enabled and
clock control register is set. This patch also adds the interface to
toggle memory reset signal if needed by the boards.

Signed-off-by: York Sun <yorksun@freescale.com>

1 files changed, 20 insertions, 0 deletions

diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 40ce6b082d..a49e3006d9 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -107,6 +107,26 @@ const char *byte_to_binary_mask(u8 val, u8 mask, char *buf)
 	return buf;
 }
 
+#ifdef QIXIS_RST_FORCE_MEM
+void board_assert_mem_reset(void)
+{
+	u8 rst;
+
+	rst = QIXIS_READ(rst_frc[0]);
+	if (!(rst & QIXIS_RST_FORCE_MEM))
+		QIXIS_WRITE(rst_frc[0], rst | QIXIS_RST_FORCE_MEM);
+}
+
+void board_deassert_mem_reset(void)
+{
+	u8 rst;
+
+	rst = QIXIS_READ(rst_frc[0]);
+	if (rst & QIXIS_RST_FORCE_MEM)
+		QIXIS_WRITE(rst_frc[0], rst & ~QIXIS_RST_FORCE_MEM);
+}
+#endif
+
 void qixis_reset(void)
 {
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);