Qualcomm ARM64 Devicetree updates for v6.3

This introduces support for the new Snapdragon 8 Gen 2 (SM8550)
platform.  In addition to the adding support for the MTP on this
platform, support the following devices is introduced:
 - GPLUS FL8005A
 - Google Zombie with LTE and NVMe
 - Google Zombie with NVMe
 - Lenovo Tab P11
 - Motorola G5 Plus
 - Motorola G7 Power
 - Motorola Moto G6
 - Samsung Galaxy J5 (2016)
 - Samsung Galaxy Tab A 8.0
 - Samsung Galaxy Tab A 9.7
 - Xiaomi Mi A1
 - Xiaomi Mi A2 Lite
 - Xiaomi Redmi 5 Plus
 - Xiaomi Redmi Note 4X

On IPQ8074 the PCIe PHY register regions and PHY clock names are
corrected.

On MSM8916 DMA for the I2C controllers are introduced and blsp_dma is
unconditionally enabled. Per-sensor calibration data is provided for the
thermal sensor (tsens) block. The GPLUS FL8005A device is introduced and
gains support for touchscreen and flash LED. An additional Samsung
Galaxy J5 variant is added, and support is added for hall sensor and
MUIC.

Per-sensor calibration information is introduced for the thermal sensor
on MSM8956 as well.

On MSM8996, GPLL0 is added as a possible Kryo clock controller input, a
carveout is added to get modem metadata out of System RAM. Missing bus
clocks are added for agnoc2.
SDHCI1 is enabled on the Sony Xperia Tone platform and USB is limited to
high-speed, to make USB work.

MSM8998 gains the same modem carveout as other platforms, and the
description of the clock hierarchy is improved.

On QCS404 the clock hierarchy description is improved, the CDSP PAS node
is adjusted to match the binding and the thermal sensor (tsens) gains
per-sensor calibration information.

On SC7180 the Data Capture and Compare block is intorduced, and a
carveout for the modem metadata is introduced, to get this out of System
RAM. Pazquel360 gains touchscreen support, the regulator off-on-time is
adjusted for the Trogdor eDP and touchscreen.
Data lane and frequency properties are introduced for the DisplayPort
links.

SC7280 also gets Data Capture and Compare support, as well as the
dedicated modem metadata region. Herobrine gains DP audio support.
IPA description is updated so that it's only active on boards with a
modem.

On SC8280XP the display subsystem is introduced, currently with support
for most of the DisplayPort controllers. GPR, SoundWire and LPASS is
introduced, for audio support. Missing I2C and SPI controllers are
introduced.
Support for EDP is introduced for the CRD, the Lenovo ThinkPad X13s and
the SA8295P ADP automotive board. The SA8540P Ride platform enables one
i2c and pcie controllers.
A CMA region is defined for the CRD and X13s, to avoid allocation issues
from the NVMe support.

Fairphone FP3 gains NFC support and the Sony Xperia Nile platform gains
a description of simplefb.
SDM670 gains QFPROM definition.

SDM845 gains a carveout for the modem metadata and support for the Data
Capture and Compare block is introduced.  Lenovo Yoga C630 firmware
paths are aligned with all other Qualcomm platforms.

On SM6125 apss SMMU is introduced and streams are defined for USB and
SDHCI controllers. GPI DMA description is introduced, as well as missing
SPI and I2C serial engines.
On Sony Xperia 10 IIa regulator definitions are improved, SDHCI2 is
introduced, and I2C and related GPI DMA blocks are enabled.

On SM6350 IPA is introduced. DDR and L3 scaling is introduced based on
CPUfreq.

Fairphone FP4, on SM7225 also has IPA enabled, and the Flash LED is
enabled as well.

On SM8150 the display subsystem is introduced, with clock controller,
DPU and two DSI controllers. The Data Capture and Compare block is
introduced.
For the Sony Xperia Kumano platform, GPIO keys and NFC support is
introduced.

For SM8350 PCIe is introduced, as is the display subsystem with display
clock controller, DPU and two DSI controllers. #interconnect-cells is
changed to 2, to align with other platforms and allow for active-only
votes. The display is enabled and the LT9611uxc found on the SM8350
Hardware Development Kit board is described, to provide HDMI output.

On SM8450 the display subsystem is introduced, with DPU and two DSI
controllers.  GIC-ITS support is introduced for both PCIe0 and PCIe1.
SPMI bus support is introduced and pmics are wired up across the various
devices.
The display subsystem is enabled and the LT9611uxc is described to
provide HDMI output on the SM8450 Hardware Development Kit.
On Sony Xperia Nagara platform, GPIO keys and GPIO line names are
introduced. As is the SLG51000 PMIC and camera regulators are defined.

Support for SM8550 is introduced, with support for storage, USB,
remoteprocs, PCIe, low-speed buses, crypto and display subsystem. These
blocks are enabled on the MTP.

Lastly, the work continue to align Devicetree source with bindings
across all platforms.
-----BEGIN PGP SIGNATURE-----
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=I+bB
-----END PGP SIGNATURE-----