/* * * (C) COPYRIGHT 2014-2015 ARM Limited. All rights reserved. * * This program is free software and is provided to you under the terms of the * GNU General Public License version 2 as published by the Free Software * Foundation, and any use by you of this program is subject to the terms * of such GNU licence. * * A copy of the licence is included with the program, and can also be obtained * from Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, * Boston, MA 02110-1301, USA. * */ /** * @file * Interface file for accessing MMU hardware functionality */ /** * @page mali_kbase_mmu_hw_page MMU hardware interface * * @section mali_kbase_mmu_hw_intro_sec Introduction * This module provides an abstraction for accessing the functionality provided * by the midgard MMU and thus allows all MMU HW access to be contained within * one common place and allows for different backends (implementations) to * be provided. */ #ifndef _MALI_KBASE_MMU_HW_H_ #define _MALI_KBASE_MMU_HW_H_ /* Forward declarations */ struct kbase_device; struct kbase_as; struct kbase_context; /** * @addtogroup base_kbase_api * @{ */ /** * @addtogroup mali_kbase_mmu_hw MMU access APIs * @{ */ /** @brief MMU fault type descriptor. */ enum kbase_mmu_fault_type { KBASE_MMU_FAULT_TYPE_UNKNOWN = 0, KBASE_MMU_FAULT_TYPE_PAGE, KBASE_MMU_FAULT_TYPE_BUS, KBASE_MMU_FAULT_TYPE_PAGE_UNEXPECTED, KBASE_MMU_FAULT_TYPE_BUS_UNEXPECTED }; /** @brief Configure an address space for use. * * Configure the MMU using the address space details setup in the * @ref kbase_context structure. * * @param[in] kbdev kbase device to configure. * @param[in] as address space to configure. * @param[in] kctx kbase context to configure. */ void kbase_mmu_hw_configure(struct kbase_device *kbdev, struct kbase_as *as, struct kbase_context *kctx); /** @brief Issue an operation to the MMU. * * Issue an operation (MMU invalidate, MMU flush, etc) on the address space that * is associated with the provided @ref kbase_context over the specified range * * @param[in] kbdev kbase device to issue the MMU operation on. * @param[in] as address space to issue the MMU operation on. * @param[in] kctx kbase context to issue the MMU operation on. * @param[in] vpfn MMU Virtual Page Frame Number to start the * operation on. * @param[in] nr Number of pages to work on. * @param[in] type Operation type (written to ASn_COMMAND). * @param[in] handling_irq Is this operation being called during the handling * of an interrupt? * * @return Zero if the operation was successful, non-zero otherwise. */ int kbase_mmu_hw_do_operation(struct kbase_device *kbdev, struct kbase_as *as, struct kbase_context *kctx, u64 vpfn, u32 nr, u32 type, unsigned int handling_irq); /** @brief Clear a fault that has been previously reported by the MMU. * * Clear a bus error or page fault that has been reported by the MMU. * * @param[in] kbdev kbase device to clear the fault from. * @param[in] as address space to clear the fault from. * @param[in] kctx kbase context to clear the fault from or NULL. * @param[in] type The type of fault that needs to be cleared. */ void kbase_mmu_hw_clear_fault(struct kbase_device *kbdev, struct kbase_as *as, struct kbase_context *kctx, enum kbase_mmu_fault_type type); /** @brief Enable fault that has been previously reported by the MMU. * * After a page fault or bus error has been reported by the MMU these * will be disabled. After these are handled this function needs to be * called to enable the page fault or bus error fault again. * * @param[in] kbdev kbase device to again enable the fault from. * @param[in] as address space to again enable the fault from. * @param[in] kctx kbase context to again enable the fault from. * @param[in] type The type of fault that needs to be enabled again. */ void kbase_mmu_hw_enable_fault(struct kbase_device *kbdev, struct kbase_as *as, struct kbase_context *kctx, enum kbase_mmu_fault_type type); /** @} *//* end group mali_kbase_mmu_hw */ /** @} *//* end group base_kbase_api */ #endif /* _MALI_KBASE_MMU_HW_H_ */