gas/testsuite/

	* gas/m68k/mcf-coproc.d: New.
	* gas/m68k/mcf-coproc.s: New.
	* gas/m68k/all.exp: Add it.

	gas/
	* config/tc-m68k.c (m68k_ip): Add j & K operand types.
	(install_operand): Add E encoding.
	(md_begin): Check and skip initial '.' arg character.
	(get_num): Add 0..511 case.

	include/
	* opcode/m68k.h: Document j K & E.

	opcodes/
	* m68k-dis.c (fetch_arg): Add E.  Replace length switch with
	direct masking.
	(print_ins_arg): Add j & K operand types.
	(match_insn_m68k): Check and skip initial '.' arg character.
	(m68k_scan_mask): Likewise.
	* m68k-opc.c (m68k_opcodes): Add coprocessor instructions.

11 files changed, 248 insertions, 42 deletions

diff --git a/gas/ChangeLog b/gas/ChangeLog
index a9b086840e..704e6f90d4 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,10 @@
+2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* config/tc-m68k.c (m68k_ip): Add j & K operand types.
+	(install_operand): Add E encoding.
+	(md_begin): Check and skip initial '.' arg character.
+	(get_num): Add 0..511 case.
+
 2007-07-03  Alan Modra  <amodra@bigpond.net.au>
 
 	PR 4713
diff --git a/gas/config/tc-m68k.c b/gas/config/tc-m68k.c
index a2c356b5de..32c985324c 100644
--- a/gas/config/tc-m68k.c
+++ b/gas/config/tc-m68k.c
@@ -1965,6 +1965,22 @@ m68k_ip (char *instring)
 		    losing++;
 		  break;
 
+		case 'j':
+		  if (opP->mode != IMMED)
+		    losing++;
+		  else if (opP->disp.exp.X_op != O_constant
+			   || TRUNC (opP->disp.exp.X_add_number) - 1 > 7)
+		    losing++;
+		  break;
+
+		case 'K':
+		  if (opP->mode != IMMED)
+		    losing++;
+		  else if (opP->disp.exp.X_op != O_constant
+			   || TRUNC (opP->disp.exp.X_add_number) > 511)
+		    losing++;
+		  break;
+
 		  /* JF these are out of order.  We could put them
 		     in order if we were willing to put up with
 		     bunches of #ifdef m68851s in the code.
@@ -3482,6 +3498,14 @@ m68k_ip (char *instring)
 	    tmpreg = 0;
 	  install_operand (s[1], tmpreg);
 	  break;
+	case 'j':
+	  tmpreg = get_num (&opP->disp, 10);
+	  install_operand (s[1], tmpreg - 1);
+	  break;
+	case 'K':
+	  tmpreg = get_num (&opP->disp, 65);
+	  install_operand (s[1], tmpreg);
+	  break;
 	default:
 	  abort ();
 	}
@@ -3550,6 +3574,9 @@ install_operand (int mode, int val)
     case 'd':
       the_ins.opcode[0] |= val << 9;
       break;
+    case 'E':
+      the_ins.opcode[1] |= val << 9;
+      break;
     case '1':
       the_ins.opcode[1] |= val << 12;
       break;
@@ -4362,14 +4389,28 @@ md_begin (void)
 	{
 	  ins = m68k_sorted_opcodes[i];
 
-	  /* We *could* ignore insns that don't match our
-	     arch here by just leaving them out of the hash.  */
+	  /* We must enter all insns into the table, because .arch and
+	     .cpu directives can change things.  */
 	  slak->m_operands = ins->args;
-	  slak->m_opnum = strlen (slak->m_operands) / 2;
 	  slak->m_arch = ins->arch;
 	  slak->m_opcode = ins->opcode;
-	  /* This is kludgey.  */
-	  slak->m_codenum = ((ins->match) & 0xffffL) ? 2 : 1;
+	  
+	  /* In most cases we can determine the number of opcode words
+	     by checking the second word of the mask.  Unfortunately
+	     some instructions have 2 opcode words, but no fixed bits
+	     in the second word.  A leading dot in the operands
+	     string also indicates 2 opcodes.  */
+	  if (*slak->m_operands == '.')
+	    {
+	      slak->m_operands++;
+	      slak->m_codenum = 2;
+	    }
+	  else if (ins->match & 0xffffL)
+	    slak->m_codenum = 2;
+	  else
+	    slak->m_codenum = 1;
+	  slak->m_opnum = strlen (slak->m_operands) / 2;
+	  
 	  if (i + 1 != m68k_numopcodes
 	      && !strcmp (ins->name, m68k_sorted_opcodes[i + 1]->name))
 	    {
@@ -5229,6 +5270,7 @@ md_create_long_jump (char *ptr, addressT from_addr, addressT to_addr,
    50:  absolute 0:127	   only
    55:  absolute -64:63    only
    60:  absolute -128:127  only
+   65:  absolute 0:511     only
    70:  absolute 0:4095	   only
    80:  absolute -1, 1:7   only
    90:  No bignums.          */
@@ -5284,6 +5326,10 @@ get_num (struct m68k_exp *exp, int ok)
 	  if ((valueT) SEXT (offs (exp)) + 128 > 255)
 	    goto outrange;
 	  break;
+	case 65:
+	  if ((valueT) TRUNC (offs (exp)) > 511)
+	    goto outrange;
+	  break;
 	case 70:
 	  if ((valueT) TRUNC (offs (exp)) > 4095)
 	    {
diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index 4eea75c6cf..f6e6691dc5 100644
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,3 +1,9 @@
+2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* gas/m68k/mcf-coproc.d: New.
+	* gas/m68k/mcf-coproc.s: New.
+	* gas/m68k/all.exp: Add it.
+
 2007-06-29  M R Swami Reddy  <MR.Swami.Reddy@nsc.com>
 
 	* gas/cr16: New directory
diff --git a/gas/testsuite/gas/m68k/all.exp b/gas/testsuite/gas/m68k/all.exp
index d4c0cdc7d9..ae9f993b7e 100644
--- a/gas/testsuite/gas/m68k/all.exp
+++ b/gas/testsuite/gas/m68k/all.exp
@@ -52,6 +52,7 @@ if { [istarget m68*-*-*] || [istarget fido*-*-*] } then {
     run_dump_test mode5
     run_dump_test mcf-mac
     run_dump_test mcf-emac
+    run_dump_test mcf-coproc
     run_dump_test mcf-fpu
     run_dump_test mcf-trap
     run_dump_test mcf-wdebug
diff --git a/gas/testsuite/gas/m68k/mcf-coproc.d b/gas/testsuite/gas/m68k/mcf-coproc.d
new file mode 100644
index 0000000000..86401cbbcb
--- /dev/null
+++ b/gas/testsuite/gas/m68k/mcf-coproc.d
@@ -0,0 +1,50 @@
+#objdump: -d
+#as: -mcpu=5475
+
+.*:     file format .*
+
+Disassembly of section .text:
+
+0+ <start>:
+[ 0-9a-f]+:	fcc0 0050      	cp0bcbusy [0-9a-f]+ <zero>
+[ 0-9a-f]+:	fc80 2123      	cp0ldl %d0,%d2,#1,#291
+[ 0-9a-f]+:	fc88 a201      	cp0ldl %a0,%a2,#2,#1
+[ 0-9a-f]+:	fc50 a401      	cp0ldw %a0@,%a2,#3,#1
+[ 0-9a-f]+:	fc18 aa01      	cp0ldb %a0@\+,%a2,#6,#1
+[ 0-9a-f]+:	fca0 ac01      	cp0ldl %a0@-,%a2,#7,#1
+[ 0-9a-f]+:	fca8 ae01 0010 	cp0ldl %a0@\(16\),%a2,#8,#1
+[ 0-9a-f]+:	fd80 2123      	cp0stl %d2,%d0,#1,#291
+[ 0-9a-f]+:	fd88 a201      	cp0stl %a2,%a0,#2,#1
+[ 0-9a-f]+:	fd50 a401      	cp0stw %a2,%a0@,#3,#1
+[ 0-9a-f]+:	fd18 aa01      	cp0stb %a2,%a0@\+,#6,#1
+[ 0-9a-f]+:	fda0 ac01      	cp0stl %a2,%a0@-,#7,#1
+[ 0-9a-f]+:	fda8 ae01 0010 	cp0stl %a2,%a0@\(16\),#8,#1
+[ 0-9a-f]+:	fc00 0e00      	cp0nop #8
+[ 0-9a-f]+:	fc80 0400      	cp0nop #3
+[ 0-9a-f]+:	fc80 1400      	cp0ldl %d0,%d1,#3,#0
+[ 0-9a-f]+:	fc88 0400      	cp0ldl %a0,%d0,#3,#0
+[ 0-9a-f]+:	fc90 0400      	cp0ldl %a0@,%d0,#3,#0
+[ 0-9a-f]+:	fca8 0400 0010 	cp0ldl %a0@\(16\),%d0,#3,#0
+[ 0-9a-f]+ <zero>:
+[ 0-9a-f]+:	4e71           	nop
+[ 0-9a-f]+:	fec0 0050      	cp1bcbusy [0-9a-f]+ <one>
+[ 0-9a-f]+:	fe80 2123      	cp1ldl %d0,%d2,#1,#291
+[ 0-9a-f]+:	fe88 a201      	cp1ldl %a0,%a2,#2,#1
+[ 0-9a-f]+:	fe50 a401      	cp1ldw %a0@,%a2,#3,#1
+[ 0-9a-f]+:	fe18 aa01      	cp1ldb %a0@\+,%a2,#6,#1
+[ 0-9a-f]+:	fea0 ac01      	cp1ldl %a0@-,%a2,#7,#1
+[ 0-9a-f]+:	fea8 ae01 0010 	cp1ldl %a0@\(16\),%a2,#8,#1
+[ 0-9a-f]+:	ff80 2123      	cp1stl %d2,%d0,#1,#291
+[ 0-9a-f]+:	ff88 a201      	cp1stl %a2,%a0,#2,#1
+[ 0-9a-f]+:	ff50 a401      	cp1stw %a2,%a0@,#3,#1
+[ 0-9a-f]+:	ff18 aa01      	cp1stb %a2,%a0@\+,#6,#1
+[ 0-9a-f]+:	ffa0 ac01      	cp1stl %a2,%a0@-,#7,#1
+[ 0-9a-f]+:	ffa8 ae01 0010 	cp1stl %a2,%a0@\(16\),#8,#1
+[ 0-9a-f]+:	fe00 0e00      	cp1nop #8
+[ 0-9a-f]+:	fe80 0400      	cp1nop #3
+[ 0-9a-f]+:	fe80 1400      	cp1ldl %d0,%d1,#3,#0
+[ 0-9a-f]+:	fe88 0400      	cp1ldl %a0,%d0,#3,#0
+[ 0-9a-f]+:	fe90 0400      	cp1ldl %a0@,%d0,#3,#0
+[ 0-9a-f]+:	fea8 0400 0010 	cp1ldl %a0@\(16\),%d0,#3,#0
+[ 0-9a-f]+ <one>:
+[ 0-9a-f]+:	4e71           	nop
diff --git a/gas/testsuite/gas/m68k/mcf-coproc.s b/gas/testsuite/gas/m68k/mcf-coproc.s
new file mode 100644
index 0000000000..6173d6ac84
--- /dev/null
+++ b/gas/testsuite/gas/m68k/mcf-coproc.s
@@ -0,0 +1,47 @@
+
+start:
+	cp0bcbusy  zero
+	cp0ld %d0,%d2,#1,#0x123
+	cp0ldl %a0,%a2,#2,#0x1
+	cp0ldw (%a0),%a2,#3,#0x1
+	cp0ldb (%a0)+,%a2,#6,#0x1
+	cp0ldl -(%a0),%a2,#7,#0x1
+	cp0ldl 16(%a0),%a2,#8,#0x1
+	
+	cp0st %d2,%d0,#1,#0x123
+	cp0stl %a2,%a0,#2,#0x1
+	cp0stw %a2,(%a0),#3,#0x1
+	cp0stb %a2,(%a0)+,#6,#0x1
+	cp0stl %a2,-(%a0),#7,#0x1
+	cp0stl %a2,16(%a0),#8,#0x1
+	
+	cp0nop #8
+	cp0ld %d0,%d0,#3,#0
+	cp0ld %d0,%d1,#3,#0
+	cp0ld %a0,%d0,#3,#0
+	cp0ld (%a0),%d0,#3,#0
+	cp0ld 16(%a0),%d0,#3,#0
+zero:	nop
+	
+	cp1bcbusy  one
+	cp1ld %d0,%d2,#1,#0x123
+	cp1ldl %a0,%a2,#2,#0x1
+	cp1ldw (%a0),%a2,#3,#0x1
+	cp1ldb (%a0)+,%a2,#6,#0x1
+	cp1ldl -(%a0),%a2,#7,#0x1
+	cp1ldl 16(%a0),%a2,#8,#0x1
+	
+	cp1st %d2,%d0,#1,#0x123
+	cp1stl %a2,%a0,#2,#0x1
+	cp1stw %a2,(%a0),#3,#0x1
+	cp1stb %a2,(%a0)+,#6,#0x1
+	cp1stl %a2,-(%a0),#7,#0x1
+	cp1stl %a2,16(%a0),#8,#0x1
+	
+	cp1nop #8
+	cp1ld %d0,%d0,#3,#0
+	cp1ld %d0,%d1,#3,#0
+	cp1ld %a0,%d0,#3,#0
+	cp1ld (%a0),%d0,#3,#0
+	cp1ld 16(%a0),%d0,#3,#0
+one:	nop
diff --git a/include/ChangeLog b/include/ChangeLog
index 8fa288e4ae..275d7291df 100644
--- a/include/ChangeLog
+++ b/include/ChangeLog
@@ -1,3 +1,7 @@
+2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* opcode/m68k.h: Document j K & E.
+
 2007-06-29  M R Swami Reddy  <MR.Swami.Reddy@nsc.com>
 
         * dis-asm.h (print_insn_cr16): New prototype.
diff --git a/include/opcode/m68k.h b/include/opcode/m68k.h
index 60bfb3a1b2..2dd6d3feda 100644
--- a/include/opcode/m68k.h
+++ b/include/opcode/m68k.h
@@ -96,10 +96,15 @@ struct m68k_opcode_alias
 
    The args field is a string containing two characters for each
    operand of the instruction.  The first specifies the kind of
-   operand; the second, the place it is stored.  */
+   operand; the second, the place it is stored.
+
+   If the first char of args is '.', it indicates that the opcode is
+   two words.  This is only necessary when the match field does not
+   have any bits set in the second opcode word.  Such a '.' is skipped
+   for operand processing.  */
 
 /* Kinds of operands:
-   Characters used: AaBbCcDdEeFfGgHIiJkLlMmnOopQqRrSsTtU VvWwXxYyZz01234|*~%;@!&$?/<>#^+-
+   Characters used: AaBbCcDdEeFfGgHIiJjKkLlMmnOopQqRrSsTtUuVvWwXxYyZz01234|*~%;@!&$?/<>#^+-
 
    D  data register only.  Stored as 3 bits.
    A  address register only.  Stored as 3 bits.
@@ -234,6 +239,8 @@ struct m68k_opcode_alias
    y						(modes 2,5)
    z						(modes 2,5,7.2)
    x  mov3q immediate operand.
+   j  coprocessor ET operand.
+   K  coprocessor command number.
    4						(modes 2,3,4,5)
   */
 
@@ -301,6 +308,7 @@ struct m68k_opcode_alias
    7  second word, shifted 7
    8  second word, shifted 10
    9  second word, shifted 5
+   E  second word, shifted 9
    D  store in both place 1 and place 3; for divul and divsl.
    B  first word, low byte, for branch displacements
    W  second word (entire), for branch displacements
diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 42ebf407b2..f6c6418361 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,3 +1,12 @@
+2007-07-03  Nathan Sidwell  <nathan@codesourcery.com>
+
+	* m68k-dis.c (fetch_arg): Add E.  Replace length switch with
+	direct masking.
+	(print_ins_arg): Add j & K operand types.
+	(match_insn_m68k): Check and skip initial '.' arg character.
+	(m68k_scan_mask): Likewise.
+	* m68k-opc.c (m68k_opcodes): Add coprocessor instructions.
+
 2007-07-02  Alan Modra  <amodra@bigpond.net.au>
 
 	* Makefile.am: Run "make dep-am".
diff --git a/opcodes/m68k-dis.c b/opcodes/m68k-dis.c
index d964ef4b28..99d4533079 100644
--- a/opcodes/m68k-dis.c
+++ b/opcodes/m68k-dis.c
@@ -280,6 +280,11 @@ fetch_arg (unsigned char *buffer,
       val = (buffer[1] >> 6);
       break;
 
+    case 'E':
+      FETCH_DATA (info, buffer + 3);
+      val = (buffer[2] >> 1);
+      break;
+
     case 'm':
       val = (buffer[1] & 0x40 ? 0x8 : 0)
 	| ((buffer[0] >> 1) & 0x7)
@@ -310,29 +315,8 @@ fetch_arg (unsigned char *buffer,
       abort ();
     }
 
-  switch (bits)
-    {
-    case 1:
-      return val & 1;
-    case 2:
-      return val & 3;
-    case 3:
-      return val & 7;
-    case 4:
-      return val & 017;
-    case 5:
-      return val & 037;
-    case 6:
-      return val & 077;
-    case 7:
-      return val & 0177;
-    case 8:
-      return val & 0377;
-    case 12:
-      return val & 07777;
-    default:
-      abort ();
-    }
+  /* bits is never too big.  */
+  return val & ((1 << bits) - 1);
 }
 
 /* Check if an EA is valid for a particular code.  This is required
@@ -685,6 +669,16 @@ print_insn_arg (const char *d,
       (*info->fprintf_func) (info->stream, "#%d", val);
       break;
 
+    case 'j':
+      val = fetch_arg (buffer, place, 3, info);
+      (*info->fprintf_func) (info->stream, "#%d", val+1);
+      break;
+
+    case 'K':
+      val = fetch_arg (buffer, place, 9, info);
+      (*info->fprintf_func) (info->stream, "#%d", val);
+      break;
+
     case 'M':
       if (place == 'h')
 	{
@@ -1214,6 +1208,7 @@ match_insn_m68k (bfd_vma memaddr,
   unsigned char *save_p;
   unsigned char *p;
   const char *d;
+  const char *args = best->args;
 
   struct private *priv = (struct private *) info->private_data;
   bfd_byte *buffer = priv->the_buffer;
@@ -1221,6 +1216,9 @@ match_insn_m68k (bfd_vma memaddr,
   void (* save_print_address) (bfd_vma, struct disassemble_info *)
     = info->print_address_func;
 
+  if (*args == '.')
+    args++;
+  
   /* Point at first word of argument data,
      and at descriptor for first argument.  */
   p = buffer + 2;
@@ -1229,7 +1227,7 @@ match_insn_m68k (bfd_vma memaddr,
      The only place this is stored in the opcode table is
      in the arguments--look for arguments which specify fields in the 2nd
      or 3rd words of the instruction.  */
-  for (d = best->args; *d; d += 2)
+  for (d = args; *d; d += 2)
     {
       /* I don't think it is necessary to be checking d[0] here;
 	 I suspect all this could be moved to the case statement below.  */
@@ -1276,8 +1274,8 @@ match_insn_m68k (bfd_vma memaddr,
      three words long.  */
   if (p - buffer < 6
       && (best->match & 0xffff) == 0xffff
-      && best->args[0] == '#'
-      && best->args[1] == 'w')
+      && args[0] == '#'
+      && args[1] == 'w')
     {
       /* Copy the one word argument into the usual location for a one
 	 word argument, to simplify printing it.  We can get away with
@@ -1291,15 +1289,13 @@ match_insn_m68k (bfd_vma memaddr,
 
   FETCH_DATA (info, p);
 
-  d = best->args;
-
   save_p = p;
   info->print_address_func = dummy_print_address;
   info->fprintf_func = (fprintf_ftype) dummy_printer;
 
   /* We scan the operands twice.  The first time we don't print anything,
      but look for errors.  */
-  for (; *d; d += 2)
+  for (d = args; *d; d += 2)
     {
       int eaten = print_insn_arg (d, buffer, p, memaddr + (p - buffer), info);
 
@@ -1329,7 +1325,7 @@ match_insn_m68k (bfd_vma memaddr,
   info->fprintf_func = save_printer;
   info->print_address_func = save_print_address;
 
-  d = best->args;
+  d = args;
 
   info->fprintf_func (info->stream, "%s", best->name);
 
@@ -1401,6 +1397,10 @@ m68k_scan_mask (bfd_vma memaddr, disassemble_info *info,
       const struct m68k_opcode *opc = opcodes[major_opcode][i];
       unsigned long opcode = opc->opcode;
       unsigned long match = opc->match;
+      const char *args = opc->args;
+
+      if (*args == '.')
+	args++;
 
       if (((0xff & buffer[0] & (match >> 24)) == (0xff & (opcode >> 24)))
 	  && ((0xff & buffer[1] & (match >> 16)) == (0xff & (opcode >> 16)))
@@ -1416,7 +1416,7 @@ m68k_scan_mask (bfd_vma memaddr, disassemble_info *info,
 	  /* Don't use for printout the variants of divul and divsl
 	     that have the same register number in two places.
 	     The more general variants will match instead.  */
-	  for (d = opc->args; *d; d += 2)
+	  for (d = args; *d; d += 2)
 	    if (d[1] == 'D')
 	      break;
 
@@ -1424,7 +1424,7 @@ m68k_scan_mask (bfd_vma memaddr, disassemble_info *info,
 	     point coprocessor instructions which use the same
 	     register number in two places, as above.  */
 	  if (*d == '\0')
-	    for (d = opc->args; *d; d += 2)
+	    for (d = args; *d; d += 2)
 	      if (d[1] == 't')
 		break;
 
@@ -1432,7 +1432,7 @@ m68k_scan_mask (bfd_vma memaddr, disassemble_info *info,
 	     wait for fmoveml.  */
 	  if (*d == '\0')
 	    {
-	      for (d = opc->args; *d; d += 2)
+	      for (d = args; *d; d += 2)
 		{
 		  if (d[0] == 's' && d[1] == '8')
 		    {
@@ -1446,7 +1446,7 @@ m68k_scan_mask (bfd_vma memaddr, disassemble_info *info,
 	  /* Don't match FPU insns with non-default coprocessor ID.  */
 	  if (*d == '\0')
 	    {
-	      for (d = opc->args; *d; d += 2)
+	      for (d = args; *d; d += 2)
 		{
 		  if (d[0] == 'I')
 		    {
diff --git a/opcodes/m68k-opc.c b/opcodes/m68k-opc.c
index 12cd14a13d..7f3b0d87c7 100644
--- a/opcodes/m68k-opc.c
+++ b/opcodes/m68k-opc.c
@@ -30,6 +30,10 @@
    be consecutive.  If they aren't, the assembler will bomb at
    runtime.  */
 
+/* Format strings consist of pairs of characters.  The first describes
+   the type of the operand and the second describes the encoding.
+   include/opcodes/m68k.h describes them in detail.  */
+
 const struct m68k_opcode m68k_opcodes[] =
 {
 {"abcd", 2,	one(0140400),	one(0170770), "DsDd", m68000up },
@@ -290,7 +294,31 @@ const struct m68k_opcode m68k_opcodes[] =
 {"cmpl", 6,	one(0006200),	one(0177700), "#lDs", mcfisa_a },
 {"cmpl", 2,	one(0130610),	one(0170770), "+s+d", m68000up },
 {"cmpl", 2,	one(0130200),	one(0170700), "*lDd", m68000up | mcfisa_a },
-
+  
+{"cp0bcbusy",2, one (0176300), one (01777770), "BW", mcfisa_a},
+{"cp1bcbusy",2, one (0177300), one (01777770), "BW", mcfisa_a},
+{"cp0nop",   4, two (0176000,0), two (01777477,0170777), "jE", mcfisa_a},
+{"cp1nop",   4, two (0177000,0), two (01777477,0170777), "jE", mcfisa_a},
+/* These all have 2 opcode words, but no fixed bits in the second
+   word.  We use a leading ' ' in the args string to indicate the
+   extra opcode word.  */
+{"cp0ldb",   6, one (0176000), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp1ldb",   6, one (0177000), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp0ldw",   6, one (0176100), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp1ldw",   6, one (0177100), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp0ldl",   6, one (0176200), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp1ldl",   6, one (0177200), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp0ld",    6, one (0176200), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp1ld",    6, one (0177200), one (01777700), ".pwR1jEK3", mcfisa_a},
+{"cp0stb",   6, one (0176400), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp1stb",   6, one (0177400), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp0stw",   6, one (0176500), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp1stw",   6, one (0177500), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp0stl",   6, one (0176600), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp1stl",   6, one (0177600), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp0st",    6, one (0176600), one (01777700), ".R1pwjEK3", mcfisa_a},
+{"cp1st",    6, one (0177600), one (01777700), ".R1pwjEK3", mcfisa_a},
+  
 {"dbcc", 2,	one(0052310),	one(0177770), "DsBw", m68000up },
 {"dbcs", 2,	one(0052710),	one(0177770), "DsBw", m68000up },
 {"dbeq", 2,	one(0053710),	one(0177770), "DsBw", m68000up },