diff options
Diffstat (limited to 'gas/doc/c-sh.texi')
| -rw-r--r-- | gas/doc/c-sh.texi | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/gas/doc/c-sh.texi b/gas/doc/c-sh.texi new file mode 100644 index 0000000000..e20f554378 --- /dev/null +++ b/gas/doc/c-sh.texi @@ -0,0 +1,272 @@ +@c Copyright (C) 1991, 92, 93, 94, 95, 1997 Free Software Foundation, Inc. +@c This is part of the GAS manual. +@c For copying conditions, see the file as.texinfo. +@page +@node SH-Dependent +@chapter Hitachi SH Dependent Features + +@cindex SH support +@menu +* SH Options:: Options +* SH Syntax:: Syntax +* SH Floating Point:: Floating Point +* SH Directives:: SH Machine Directives +* SH Opcodes:: Opcodes +@end menu + +@node SH Options +@section Options + +@cindex SH options (none) +@cindex options, SH (none) +@code{@value{AS}} has no additional command-line options for the Hitachi +SH family. + +@node SH Syntax +@section Syntax + +@menu +* SH-Chars:: Special Characters +* SH-Regs:: Register Names +* SH-Addressing:: Addressing Modes +@end menu + +@node SH-Chars +@subsection Special Characters + +@cindex line comment character, SH +@cindex SH line comment character +@samp{!} is the line comment character. + +@cindex line separator, SH +@cindex statement separator, SH +@cindex SH line separator +You can use @samp{;} instead of a newline to separate statements. + +@cindex symbol names, @samp{$} in +@cindex @code{$} in symbol names +Since @samp{$} has no special meaning, you may use it in symbol names. + +@node SH-Regs +@subsection Register Names + +@cindex SH registers +@cindex registers, SH +You can use the predefined symbols @samp{r0}, @samp{r1}, @samp{r2}, +@samp{r3}, @samp{r4}, @samp{r5}, @samp{r6}, @samp{r7}, @samp{r8}, +@samp{r9}, @samp{r10}, @samp{r11}, @samp{r12}, @samp{r13}, @samp{r14}, +and @samp{r15} to refer to the SH registers. + +The SH also has these control registers: + +@table @code +@item pr +procedure register (holds return address) + +@item pc +program counter + +@item mach +@itemx macl +high and low multiply accumulator registers + +@item sr +status register + +@item gbr +global base register + +@item vbr +vector base register (for interrupt vectors) +@end table + +@node SH-Addressing +@subsection Addressing Modes + +@cindex addressing modes, SH +@cindex SH addressing modes +@code{@value{AS}} understands the following addressing modes for the SH. +@code{R@var{n}} in the following refers to any of the numbered +registers, but @emph{not} the control registers. + +@table @code +@item R@var{n} +Register direct + +@item @@R@var{n} +Register indirect + +@item @@-R@var{n} +Register indirect with pre-decrement + +@item @@R@var{n}+ +Register indirect with post-increment + +@item @@(@var{disp}, R@var{n}) +Register indirect with displacement + +@item @@(R0, R@var{n}) +Register indexed + +@item @@(@var{disp}, GBR) +@code{GBR} offset + +@item @@(R0, GBR) +GBR indexed + +@item @var{addr} +@itemx @@(@var{disp}, PC) +PC relative address (for branch or for addressing memory). The +@code{@value{AS}} implementation allows you to use the simpler form +@var{addr} anywhere a PC relative address is called for; the alternate +form is supported for compatibility with other assemblers. + +@item #@var{imm} +Immediate data +@end table + +@node SH Floating Point +@section Floating Point + +@cindex floating point, SH (@sc{ieee}) +@cindex SH floating point (@sc{ieee}) +The SH family has no hardware floating point, but the @code{.float} +directive generates @sc{ieee} floating-point numbers for compatibility +with other development tools. + +@node SH Directives +@section SH Machine Directives + +@cindex SH machine directives +@cindex machine directives, SH +@cindex @code{uaword} directive, SH +@cindex @code{ualong} directive, SH + +@table @code +@item uaword +@itemx ualong +@code{@value{AS}} will issue a warning when a misaligned @code{.word} or +@code{.long} directive is used. You may use @code{.uaword} or +@code{.ualong} to indicate that the value is intentionally misaligned. +@end table + +@node SH Opcodes +@section Opcodes + +@cindex SH opcode summary +@cindex opcode summary, SH +@cindex mnemonics, SH +@cindex instruction summary, SH +For detailed information on the SH machine instruction set, see +@cite{SH-Microcomputer User's Manual} (Hitachi Micro Systems, Inc.). + +@code{@value{AS}} implements all the standard SH opcodes. No additional +pseudo-instructions are needed on this family. Note, however, that +because @code{@value{AS}} supports a simpler form of PC-relative +addressing, you may simply write (for example) + +@example +mov.l bar,r0 +@end example + +@noindent +where other assemblers might require an explicit displacement to +@code{bar} from the program counter: + +@example +mov.l @@(@var{disp}, PC) +@end example + +@ifset SMALL +@c this table, due to the multi-col faking and hardcoded order, looks silly +@c except in smallbook. See comments below "@set SMALL" near top of this file. + +Here is a summary of SH opcodes: + +@page +@smallexample +@i{Legend:} +Rn @r{a numbered register} +Rm @r{another numbered register} +#imm @r{immediate data} +disp @r{displacement} +disp8 @r{8-bit displacement} +disp12 @r{12-bit displacement} + +add #imm,Rn lds.l @@Rn+,PR +add Rm,Rn mac.w @@Rm+,@@Rn+ +addc Rm,Rn mov #imm,Rn +addv Rm,Rn mov Rm,Rn +and #imm,R0 mov.b Rm,@@(R0,Rn) +and Rm,Rn mov.b Rm,@@-Rn +and.b #imm,@@(R0,GBR) mov.b Rm,@@Rn +bf disp8 mov.b @@(disp,Rm),R0 +bra disp12 mov.b @@(disp,GBR),R0 +bsr disp12 mov.b @@(R0,Rm),Rn +bt disp8 mov.b @@Rm+,Rn +clrmac mov.b @@Rm,Rn +clrt mov.b R0,@@(disp,Rm) +cmp/eq #imm,R0 mov.b R0,@@(disp,GBR) +cmp/eq Rm,Rn mov.l Rm,@@(disp,Rn) +cmp/ge Rm,Rn mov.l Rm,@@(R0,Rn) +cmp/gt Rm,Rn mov.l Rm,@@-Rn +cmp/hi Rm,Rn mov.l Rm,@@Rn +cmp/hs Rm,Rn mov.l @@(disp,Rn),Rm +cmp/pl Rn mov.l @@(disp,GBR),R0 +cmp/pz Rn mov.l @@(disp,PC),Rn +cmp/str Rm,Rn mov.l @@(R0,Rm),Rn +div0s Rm,Rn mov.l @@Rm+,Rn +div0u mov.l @@Rm,Rn +div1 Rm,Rn mov.l R0,@@(disp,GBR) +exts.b Rm,Rn mov.w Rm,@@(R0,Rn) +exts.w Rm,Rn mov.w Rm,@@-Rn +extu.b Rm,Rn mov.w Rm,@@Rn +extu.w Rm,Rn mov.w @@(disp,Rm),R0 +jmp @@Rn mov.w @@(disp,GBR),R0 +jsr @@Rn mov.w @@(disp,PC),Rn +ldc Rn,GBR mov.w @@(R0,Rm),Rn +ldc Rn,SR mov.w @@Rm+,Rn +ldc Rn,VBR mov.w @@Rm,Rn +ldc.l @@Rn+,GBR mov.w R0,@@(disp,Rm) +ldc.l @@Rn+,SR mov.w R0,@@(disp,GBR) +ldc.l @@Rn+,VBR mova @@(disp,PC),R0 +lds Rn,MACH movt Rn +lds Rn,MACL muls Rm,Rn +lds Rn,PR mulu Rm,Rn +lds.l @@Rn+,MACH neg Rm,Rn +lds.l @@Rn+,MACL negc Rm,Rn +@page +nop stc VBR,Rn +not Rm,Rn stc.l GBR,@@-Rn +or #imm,R0 stc.l SR,@@-Rn +or Rm,Rn stc.l VBR,@@-Rn +or.b #imm,@@(R0,GBR) sts MACH,Rn +rotcl Rn sts MACL,Rn +rotcr Rn sts PR,Rn +rotl Rn sts.l MACH,@@-Rn +rotr Rn sts.l MACL,@@-Rn +rte sts.l PR,@@-Rn +rts sub Rm,Rn +sett subc Rm,Rn +shal Rn subv Rm,Rn +shar Rn swap.b Rm,Rn +shll Rn swap.w Rm,Rn +shll16 Rn tas.b @@Rn +shll2 Rn trapa #imm +shll8 Rn tst #imm,R0 +shlr Rn tst Rm,Rn +shlr16 Rn tst.b #imm,@@(R0,GBR) +shlr2 Rn xor #imm,R0 +shlr8 Rn xor Rm,Rn +sleep xor.b #imm,@@(R0,GBR) +stc GBR,Rn xtrct Rm,Rn +stc SR,Rn +@end smallexample +@end ifset + +@ifset Hitachi-all +@ifclear GENERIC +@raisesections +@end ifclear +@end ifset + |