Merge tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxlinaro-local/ci/tcwg_kernel/gnu-master-arm-mainline-allyesconfiglinaro-local/ci/tcwg_kernel/gnu-master-aarch64-mainline-defconfiglinaro-local/ci/tcwg_gnu_cross_check_gcc/master-armlinaro-local/ci/tcwg_gnu_cross_check_gcc/master-aarch64linaro-local/ci/tcwg_gnu_cross_build/master-armlinaro-local/ci/tcwg_gnu_cross_build/master-aarch64

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for the remoteproc on Mediatek MT8188, and
  enables caches for MT8186 SCP. It adds support for PRU cores found on
  the TI K3 AM62x SoCs.

  It moves the recovery work after a firmware crash to an unbound
  workqueue, to allow recovery to happen in parallel.

  A new DMA API is introduced to release dma_mem for a device.

  It adds support a panic handler for the Qualcomm modem remoteproc,
  with the goal of having caches flushed in memory dumps for post-mortem
  debugging and it introduces a mechanism to wait for the modem firmware
  on SM8450 to decrypt part of its memory for post-mortem debugging.

  Qualcomm sysmon is restricted to only inform remote processors about
  peers that are actually running, to avoid a race where Linux tries to
  notify a recovering remote processor about its peers new state. A
  mechanism for waiting for the sysmon connection to be established is
  also introduced, to avoid out-of-sync updates for rapidly restarting
  remote processors.

  A number of Devicetree binding cleanups and conversions to YAML are
  introduced, to facilitate Devicetree validation. Lastly it introduces
  a number of smaller fixes and cleanups in the core and a few different
  drivers"

* tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits)
  remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found
  drivers/remoteproc: fix repeated words in comments
  remoteproc: Directly use ida_alloc()/free()
  remoteproc: Use unbounded workqueue for recovery work
  remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators
  remoteproc: sysmon: Send sysmon state only for running rprocs
  remoteproc: sysmon: Wait for SSCTL service to come up
  remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq
  remoteproc: qcom: pas: Check if coredump is enabled
  remoteproc: qcom: pas: Mark devices as wakeup capable
  remoteproc: qcom: pas: Mark va as io memory
  remoteproc: qcom: pas: Add decrypt shutdown support for modem
  remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config
  remoteproc: qcom_q6v5: Introduce panic handler for MSS
  remoteproc: qcom_q6v5_mss: Update MBA log info
  remoteproc: qcom: correct kerneldoc
  remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use
  remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code
  remoteproc: mediatek: Support MT8188 SCP
  ...

1 files changed, 3 insertions, 3 deletions

diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 32a588fefbdc..430fab0266ed 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -243,7 +243,7 @@ static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
  * omap_rproc_ack_timer_irq() - acknowledge a timer irq
  * @timer: handle to a OMAP rproc timer
  *
- * This function is used to clear the irq associated with a watchdog timer. The
+ * This function is used to clear the irq associated with a watchdog timer.
  * The function is called by the OMAP remoteproc upon a watchdog event on the
  * remote processor to clear the interrupt status of the watchdog timer.
  */
@@ -303,7 +303,7 @@ static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
  * @configure: boolean flag used to acquire and configure the timer handle
  *
  * This function is used primarily to enable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either acquire and start a timer (during device initialization) or
  * to just start a timer (during a resume operation).
  *
@@ -443,7 +443,7 @@ free_timers:
  * @configure: boolean flag used to release the timer handle
  *
  * This function is used primarily to disable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either stop and release a timer (during device shutdown) or to just
  * stop a timer (during a suspend operation).
  *