diff options
Diffstat (limited to 'debian.linaro/changelog')
| -rw-r--r-- | debian.linaro/changelog | 346 |
1 files changed, 342 insertions, 4 deletions
diff --git a/debian.linaro/changelog b/debian.linaro/changelog index 4ffe402f328..26f1d13b34f 100644 --- a/debian.linaro/changelog +++ b/debian.linaro/changelog @@ -1,3 +1,341 @@ +linux-linaro (2.6.39-1001.2) oneiric; urgency=low + + [ John Rigby ] + + * Rebase on linaro-linux-2.6.39-upstream-23Jun2011 + * Bump ABI + * update configs after rebase + * CONFIG: Disable OMAP2 to allow THUMB2_KERNEL + * CONFIG: Update omap config based on upstream omap4_defconfig + * Rebase to linux-linaro-2.6.39-2011.06-0 + + -- John Rigby <john.rigby@linaro.org> Sun, 26 Jun 2011 18:47:45 +0100 + +linux-linaro (2.6.39-1000.1) oneiric; urgency=low + + [ John Rigby ] + + * Reenable building of dtb's + + -- John Rigby <john.rigby@linaro.org> Wed, 22 Jun 2011 07:22:49 -0600 + +linux-linaro (2.6.39-1000.0) oneiric; urgency=low + + [ John Rigby ] + + * Start Oneiric + * First 2.6.39 release based on + linaro-linux-2.6.39-upstream-21Jun2011 + Ubuntu-2.6.39-3.10 + * Minimal configs based on upstream defconfigs plus + additional options to satisfy enforce script + + -- John Rigby <john.rigby@linaro.org> Tue, 21 Jun 2011 13:45:49 -0600 + +linux-linaro (2.6.38-1003.4) natty; urgency=low + + [ Avik Sil ] + + arm: pmu: support pmu/perf on OMAP4 + - LP: #702999 + + [ Ian Multon ] + OMAP: Fix non-combined OMAP3+OMAP4 builds + + [ Ricardo Salveti ] + + OMAP4 DRM support: + ARM: OMAP4: Remove extra instance of omap_dss_device + OMAP: DSS2: HDMI: Adding get_edid callback support + OMAP: DSS2: HDMI: Adding is_detected callback support + OMAP: DSS: HDMI: tame hdmi driver + DRM: OMAP: Add HDMI support + OMAP: DSS2: adding force argument to is_detected() + OMAP4: DSS2: HDMI: adding a workaround for LG monitors + OMAP: DSS2: Avoid enabling panel if none is around + OMAP: I2C: "controller timed out" message should use dev_warn + OMAP: devices: register first the drm omap device, and then the SGX one + OMAP4: DSS: HDMI: increasing msleep value for the detect workaround + OMAP: DRM: Using same numbers of CRTCS and PIPES for OMAP 3 and 4 + DRM: OMAP: Fixing PVR kernel module name + OMAP2: DSS: HDMI: removing error msg from check_timing + LINARO: CONFIG: enable CONFIG_PREEMPT for OMAP as needed for SGX + LINARO: CONFIG: Enabling WL12XX + LINARO: CONFIG: Changing CONFIG_LEDS_TRIGGER_HEARTBEAT from module to built-in + DRM: OMAP: replace request_module with request_module_nowait + + [ John Rigby ] + + * Rebase to new upstreams: + Linux v2.6.38.3 + linaro-linux-2.6.38-upstream-20Apr2011 + Ubuntu-2.6.38-8.42 + And temporarily: + testbranch from linaro-linux-2.6.38 until it is merge upstream + and enable CONFIG_DRM for omap + - LP: #725252 + Enable profiling related CONFIG options: + CONFIG_PROFILING=y + CONFIG_PERF_EVENTS=y + CONFIG_HW_PERF_EVENTS=y + CONFIG_FTRACE=y + CONFIG_ENABLE_DEFAULT_TRACERS=y + CONFIG_HIGH_RES_TIMERS=y + * Rebase to linaro-linux-2.6.38-upstream-26Apr2011 + * Rebase to linaro-linux-2.6.38 as of 3May2011 + master and testing merged. + * Enable MUSB related CONFIG options for OMAP: + CONFIG_USB_MUSB_HDRC=y + CONFIG_USB_MUSB_OMAP2PLUS=y + CONFIG_USB_MUSB_OTG=y + CONFIG_USB_GADGET_MUSB_HDRC=y + CONFIG_USB_MUSB_HDRC_HCD=y + CONFIG_USB_INVENTRA_DMA=y + CONFIG_USB_MUSB_DEBUG=y + - LP: #730698 + * Disable CPU_FREQ for omap because of stability issues + * Rebase to linaro-linux-2.6.38-upstream-17May2011 + Has all the OMAP4 display fixes from rsalveti so those + have been removed from Linaro patch series. + * Rebase to linux-linux-2.6.38-upstream-23May2011 + Which is includes upstream stable release v2.6.38.7 + * Enable HIGHMEM for OMAP + * Disable WL12XX + Breaks all networking in current state + * Rebase on final linux-linux-2.6.38 linaro-11.05-2.6.38 + * Fix provides to provide linux-image, linux-headers etc. + - LP: #786829 + + [ Upstream Fixes ] + + * WARN_ON_SMP(): Allow use in if() statements on UP + * futex: Fix WARN_ON() test for UP + + -- John Rigby <john.rigby@linaro.org> Fri, 27 May 2011 18:53:05 -0600 + +linux-linaro (2.6.38-1002.3) natty; urgency=low + + [ Upstream Fixes ] + + * MUSB: shutdown: Make sure block is awake before doing shutdown + - LP: #745737 + * Fixed gpio polarity of gpio USB-phy reset. + - LP: #747639 + + [ Andy Green ] + + * LINARO: SAUCE: disable CONFIG_OMAP_RESET_CLOCKS + - LP: #752900 + + [ John Rigby ] + + * Rebase to new upstreams: + Linux v2.6.38.1 + linaro-linux-2.6.38-upstream-29Mar2011 + Ubuntu-2.6.38-7.35 + * SAUCE: OMAP4: clock: wait for module to become accessible on + a clk enable + - LP: #745737 + * Rebase to new upstreams: + Linux v2.6.38.2 + linaro-linux-2.6.38-upstream-5Apr2011 + Ubuntu-2.6.38-8.41 + - LP: #732842 + * Update configs for device tree, dvfs and lttng + * LINARO: add building of dtb's + * LINARO: SAUCE: Disable lowest operating freqs on omap34xx + - LP: #732912 + + -- John Rigby <john.rigby@linaro.org> Thu, 14 Apr 2011 12:16:06 -0600 + +linux-linaro (2.6.38-1001.2) natty; urgency=low + + [ John Rigby ] + + * Rebase to new upstreams: + Linux v2.6.38-rc6 -- same + linaro-linux-2.6.38-upstream-1Mar2011 -- new + Ubuntu-2.6.38-5.32 -- same + - LP: #724377 + * Enable CONFIG_THUMB2_KERNEL for OMAP[34] + * Bump ABI + * Rebase to new upstreams: + Linux v2.6.38-rc7 + linaro-linux-2.6.38-upstream-4Mar2011 + ubuntu-natty master-next as of 4Mar2011 + * Re-enable display on OMAP4 + * Disable CONFIG_OMAP2_DSS_SDI + - LP: #728603 + - LP: #720055 + * Rebase to new upstreams: + Linux v2.6.38-rc8 + linaro-linux-2.6.38-upstream-9Mar2011 + rebased to 2.6.38-rc8 + * Remove generated file kernel-versions and sort kernel-versions.in + * Enable CONFIG_TIMER_STATS + - LP: #718677 + * Rebase to new upstreams: + Linux v2.6.38 final + linaro-linux-2.6.38-upstream-16Mar2011 + - LP: #708883 + - LP: #723159 + ubuntu-natty Ubuntu-2.6.38-7.35 + * Enable CONFIG_IP_PNP and CONFIG_ROOT_NFS for all flavours + - LP: #736429 + * mach-ux500: fix build error + workaround a problem in linux-linaro-2.6.38 + * OMAP4:Fix -EINVAL for vana, vcxio, vdac + from omap-linux mailing list pending ack + * turn off ROOT_NFS for mx51 + it makes the kernel too large to boot with current hwpack settings + + -- John Rigby <john.rigby@linaro.org> Fri, 18 Mar 2011 07:36:33 -0600 + +linux-linaro (2.6.38-1000.1) natty; urgency=low + + * Rebase to new upstreams: + Linux v2.6.38-rc5 + linaro-linux-2.6.38-upstream-22Feb2011 + Ubuntu-2.6.38-4.31 + * Enforce CONFIG_PM_ADVANCED_DEBUG for all flavours + - LP: #713075 + * Temporarily disable display on OMAP4 + * Rebase to new upstreams: + Linux v2.6.38-rc6 + linaro-linux-2.6.38-upstream-23Feb2011 + Ubuntu-2.6.38-5.32 + * OMAP4: enable smc instructions in arch/arm/mach-omap2/sleep34xx.S + * Disable CONFIG_BINFMT_AOUT for OMAP + Now consistent with other platforms + + -- John Rigby <john.rigby@linaro.org> Wed, 23 Feb 2011 16:57:41 -0700 + +linux-linaro (2.6.37-1003.6) natty; urgency=low + + [ John Rigby ] + + * Rebase to new upstreams: + linaro-linux-2.6.37-upstream-24Jan2011 + Ubuntu-2.6.37-12.26 + Skipping because of conflicting upstream patches: + ARM: stack protector: change the canary value per task + Revert "ARM: stack protector: change the canary value per task" + UBUNTU: SAUCE: ARM: OMAP: Beagle: support twl gpio differences on xM + * Add U8500 flavour + * Rebase to linaro-linux-2.6.37-upstream-27Jan2011 + * Fix Ubuntu upstream version number typo + * Rebase to linaro-linux-2.6.37-upstream-31Jan2011 + * Rebase to linaro-linux-2.6.37-upstream-08Feb2011 + * Enforce CONFIG_PRINTK_TIME for all flavours + - LP: #715576 + * Fix package control file to indicate that OMAP4 is supported + - LP: #714590 + * Enforce CONFIG_PM_DEBUG for all flavours + - LP: #713075 + * Add s5pv310 flavour + * enable and enforce CONFIG_BTRFS_FS for all flavours + - LP: #715835 + * Rebase to linaro-linux-2.6.37-upstream-10Feb2011 + - LP: #707038 + * Add config cleanup and automatic tmp branch creation to mkflavourbranches + + -- John Rigby <john.rigby@linaro.org> Tue, 08 Feb 2011 19:56:22 -0700 + +linux-linaro (2.6.37-1002.5) natty; urgency=low + + [ John Rigby ] + + * rebase to new upstreams: + v2.6.37 final + Ubuntu-2.6.37-12.26 + * Clean up lintian errors and warnings + - LP: #697317 + + -- John Rigby <john.rigby@linaro.org> Sat, 08 Jan 2011 18:34:41 -0700 + +linux-linaro (2.6.37-1001.4) natty; urgency=low + + [ John Rigby ] + + * rebase to new upstreams: + snapshot of linux-linaro-2.6.36 13Dec2010 + revert 2.6.36.1 + merge v2.6.37-rc4 + rebase Ubuntu-2.6.37-8.21 onto the result + * LINARO: update configs + enable CONFIG_SWAP, CONFIG_POSIX_MQUEUES, CONFIG_PERF_EVENTS + + -- John Rigby <john.rigby@linaro.org> Mon, 13 Dec 2010 16:51:19 -0700 + +linux-linaro (2.6.37-1000.3) natty; urgency=low + + [ John Rigby ] + + * LINARO: no build-depends-indep for now + * LINARO: Fix problems with naming of flavour independent debs + * OMAP4: enable smc instruction in new assembler versions + + -- John Rigby <john.rigby@linaro.org> Wed, 01 Dec 2010 01:07:18 -0700 + +linux-linaro (2.6.37-1000.2) natty; urgency=low + + [ John Rigby ] + + * fix problems with source package per flavour building + + -- John Rigby <john.rigby@linaro.org> Tue, 30 Nov 2010 01:00:49 -0700 + +linux-linaro (2.6.37-1000.1) natty; urgency=low + + [ John Rigby ] + + * rebase to new upstreams: + snapshot of linux-linaro-2.6.36 24Nov2010 + minus commits from 2.6.36.1 merge + merged with upstream v2.6.37-rc3 + plus sauce and packaging from Ubuntu-2.6.37-7.18 + all but three commits applied cleanly + Fixed: + UBUNTU: SAUCE: omap: remove calls to usb_nop_xceiv_register from board files + Dropped: + ARM: stack protector: change the canary value per task + Revert "ARM: stack protector: change the canary value per task" + after merge conflict was resolved the commit ended up being no change + so the effect was to drop these + + -- John Rigby <john.rigby@linaro.org> Fri, 26 Nov 2010 14:20:09 -0700 + +linux-linaro (2.6.36-1000.1) natty; urgency=low + + [ John Rigby ] + + * First 2.6.36 release based on: + linux-linaro-2.6.36 snapshot of 16Nov2010 + Note: this is core 2.6.36 plus ARM related from 2.6.37 + + Ubuntu 2.6.37-5.13 packaging and sauce + All Ubuntu patches applied cleanly or cleanly after fixes + with the following exceptions. See linaro-dropped.txt for details: + + These are not needed because these already are in linux-linaro-2.6.36: + ARM: stack protector: change the canary value per task + Revert "ARM: stack protector: change the canary value per task" + + These were not applied because ...: + UBUNTU: SAUCE: fix documentation strings for struct input_keymap_entry + This patch does not seem to patch any code that exists in linux-linaro-2.6.36 + For that matter it doesn't do what the description says even in Ubuntu + mmap randomization for executable mappings on 32-bit + Not a trivial merge failure, wait for linux-linaro-2.6.37 for this + Fix userspace build of linux/fs.h + patches a section of file that does not exist in 2.6.36 + UBUNTU: ubuntu: AUFS -- track changes to work queue initialisation + change that makes this patch necessary is not in 2.6.36 + + Linaro packaging + + -- John Rigby <john.rigby@linaro.org> Thu, 18 Nov 2010 15:23:03 -0700 + linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low [ Robert Nelson ] @@ -249,15 +587,15 @@ linux-linaro (2.6.35-1002.6) maverick; urgency=low linux-linaro (2.6.35-1001.5) maverick; urgency=low * New upstream trees - + Merge of linaro_merge_100811 and Ubuntu-2.6.35-15.21 - + Conflicts: arch/arm/mach-omap2/board-4430sdp.c - + linaro_merge_100811 added sdp4430_leds_gpio to sdp4030_devices Ubuntu 2.6.35-15.21 added sdp4430_nop_usb_device to sdp4030_devices - + resolution was to just add both * Fold in packaging from 2.6.35-1000.4 |