diff options
3 files changed, 9 insertions, 9 deletions
diff --git a/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt b/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt index b004b83..9c7d617 100644 --- a/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt +++ b/android/images/armv8-android-juno-lsk/HOWTO_getsourceandbuild.txt @@ -188,13 +188,13 @@ bc. $ cd $JUNO_ROOT_DIR/edk2 bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile -The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL32_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. +The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL33_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. To build RELEASE version of UEFI firmware: bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile EDK2_BUILD=RELEASE -Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. +Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. To clean EDK2 source tree: @@ -238,7 +238,7 @@ $ cp <path to prebuilt binary>/bl30.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl2.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl31.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl32.bin . -$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd bl33.bin +$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd bl33.bin If you wish to use the pre-built ARM trusted firmware and UEFI EDK2 images instead of building them from source, then the last four lines of the above block can independently be replaced with the following: diff --git a/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt b/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt index 8e7c5b2..27e4cbf 100644 --- a/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt +++ b/android/images/armv8-juice-juno-lsk/HOWTO_getsourceandbuild.txt @@ -188,13 +188,13 @@ bc. $ cd $JUNO_ROOT_DIR/edk2 bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile -The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL32_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. +The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL33_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. To build RELEASE version of UEFI firmware: bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile EDK2_BUILD=RELEASE -Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. +Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. To clean EDK2 source tree: @@ -238,7 +238,7 @@ $ cp <path to prebuilt binary>/bl30.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl2.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl31.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl32.bin . -$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd bl33.bin +$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd bl33.bin If you wish to use the pre-built ARM trusted firmware and UEFI EDK2 images instead of building them from source, then the last four lines of the above block can independently be replaced with the following: diff --git a/openembedded/juno-lsk/HACKING.textile b/openembedded/juno-lsk/HACKING.textile index de3c74b..e3a52d7 100644 --- a/openembedded/juno-lsk/HACKING.textile +++ b/openembedded/juno-lsk/HACKING.textile @@ -174,13 +174,13 @@ bc. $ cd $JUNO_ROOT_DIR/edk2 bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile -The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL32_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. +The build produces the binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/DEBUG_GCC48/FV/BL33_AP_UEFI.fd that should be used as 'bl33.bin' when generating the Firmware Image Package binary. To build RELEASE version of UEFI firmware: bc. $ make -f ArmPlatformPkg/ArmJunoPkg/Makefile EDK2_BUILD=RELEASE -Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. +Use the release binary $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd as bl33.bin when generating the Firmware Image Package binary. To clean EDK2 source tree: @@ -224,7 +224,7 @@ $ cp <path to prebuilt binary>/bl30.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl2.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl31.bin . $ cp $JUNO_ROOT_DIR/arm-trusted-firmware/build/juno/release/bl32.bin . -$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL32_AP_UEFI.fd bl33.bin +$ cp $JUNO_ROOT_DIR/edk2/Build/ArmJuno/RELEASE_GCC48/FV/BL33_AP_UEFI.fd bl33.bin If you wish to use the pre-built ARM trusted firmware and UEFI EDK2 images instead of building them from source, then the last four lines of the above block can independently be replaced with the following: |