aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2012-04-28 10:13:45 +0200
committerGrant Likely <grant.likely@secretlab.ca>2012-05-11 18:18:50 -0600
commitdf9541a60af0985c3a756dc5f99b9253d2565a07 (patch)
treedb404b9bc490968251c4f250c74733965b28ea93
parent6edd94db250038c8fdf176f23ca4017d2f312509 (diff)
gpio: pch9: Use proper flow type handlers
Jean-Francois Dagenais reported: Configuring a gpio pin with the gpio-pch driver with "IRQF_TRIGGER_LOW | IRQF_ONESHOT" generates an interrupt storm for threaded ISR until the ISR thread actually gets to physically clear the interrupt on the triggering chip!! The immediate observable symptom is the high CPU usage for my ISR thread task and the interrupt count in /proc/interrupts incrementing radically. The driver is wrong in several ways: 1) Using handle_simple_irq() does not provide proper flow control handling. In the case of oneshot threaded handlers for the demultiplexed interrupts this results in an interrupt storm because the simple handler does not deal with masking/unmasking. Even without threaded oneshot handlers an interrupt storm for level type interrupts can easily be triggered when the interrupt is disabled and the interrupt line is activated from the device. 2) Acknowlegding the demultiplexed interrupt before calling the handler is wrong for level type interrupts. 3) The set_type function unconditionally enables the interrupt. It's supposed to set the type and nothing else. The unmasking is done by the core code. Move the acknowledge code into a separate function and add it to the demux irqchip callbacks. Remove the unconditional enabling from the set_type() callback and set the proper flow handlers depending on the selected type (level/edge). Reported-and-tested-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-rw-r--r--drivers/gpio/gpio-pch.c57
1 files changed, 28 insertions, 29 deletions
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index e8729cc2ba2..2cd958e0b82 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -230,16 +230,12 @@ static void pch_gpio_setup(struct pch_gpio *chip)
static int pch_irq_type(struct irq_data *d, unsigned int type)
{
- u32 im;
- u32 __iomem *im_reg;
- u32 ien;
- u32 im_pos;
- int ch;
- unsigned long flags;
- u32 val;
- int irq = d->irq;
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct pch_gpio *chip = gc->private;
+ u32 im, im_pos, val;
+ u32 __iomem *im_reg;
+ unsigned long flags;
+ int ch, irq = d->irq;
ch = irq - chip->irq_base;
if (irq <= chip->irq_base + 7) {
@@ -270,30 +266,22 @@ static int pch_irq_type(struct irq_data *d, unsigned int type)
case IRQ_TYPE_LEVEL_LOW:
val = PCH_LEVEL_L;
break;
- case IRQ_TYPE_PROBE:
- goto end;
default:
- dev_warn(chip->dev, "%s: unknown type(%dd)",
- __func__, type);
- goto end;
+ goto unlock;
}
/* Set interrupt mode */
im = ioread32(im_reg) & ~(PCH_IM_MASK << (im_pos * 4));
iowrite32(im | (val << (im_pos * 4)), im_reg);
- /* iclr */
- iowrite32(BIT(ch), &chip->reg->iclr);
+ /* And the handler */
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ __irq_set_handler_locked(d->irq, handle_level_irq);
+ else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+ __irq_set_handler_locked(d->irq, handle_edge_irq);
- /* IMASKCLR */
- iowrite32(BIT(ch), &chip->reg->imaskclr);
-
- /* Enable interrupt */
- ien = ioread32(&chip->reg->ien);
- iowrite32(ien | BIT(ch), &chip->reg->ien);
-end:
+unlock:
spin_unlock_irqrestore(&chip->spinlock, flags);
-
return 0;
}
@@ -313,18 +301,24 @@ static void pch_irq_mask(struct irq_data *d)
iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->imask);
}
+static void pch_irq_ack(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct pch_gpio *chip = gc->private;
+
+ iowrite32(1 << (d->irq - chip->irq_base), &chip->reg->iclr);
+}
+
static irqreturn_t pch_gpio_handler(int irq, void *dev_id)
{
struct pch_gpio *chip = dev_id;
u32 reg_val = ioread32(&chip->reg->istatus);
- int i;
- int ret = IRQ_NONE;
+ int i, ret = IRQ_NONE;
for (i = 0; i < gpio_pins[chip->ioh]; i++) {
if (reg_val & BIT(i)) {
dev_dbg(chip->dev, "%s:[%d]:irq=%d status=0x%x\n",
__func__, i, irq, reg_val);
- iowrite32(BIT(i), &chip->reg->iclr);
generic_handle_irq(chip->irq_base + i);
ret = IRQ_HANDLED;
}
@@ -343,6 +337,7 @@ static __devinit void pch_gpio_alloc_generic_chip(struct pch_gpio *chip,
gc->private = chip;
ct = gc->chip_types;
+ ct->chip.irq_ack = pch_irq_ack;
ct->chip.irq_mask = pch_irq_mask;
ct->chip.irq_unmask = pch_irq_unmask;
ct->chip.irq_set_type = pch_irq_type;
@@ -357,6 +352,7 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
s32 ret;
struct pch_gpio *chip;
int irq_base;
+ u32 msk;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
@@ -408,8 +404,13 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
}
chip->irq_base = irq_base;
+ /* Mask all interrupts, but enable them */
+ msk = (1 << gpio_pins[chip->ioh]) - 1;
+ iowrite32(msk, &chip->reg->imask);
+ iowrite32(msk, &chip->reg->ien);
+
ret = request_irq(pdev->irq, pch_gpio_handler,
- IRQF_SHARED, KBUILD_MODNAME, chip);
+ IRQF_SHARED, KBUILD_MODNAME, chip);
if (ret != 0) {
dev_err(&pdev->dev,
"%s request_irq failed\n", __func__);
@@ -418,8 +419,6 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
pch_gpio_alloc_generic_chip(chip, irq_base, gpio_pins[chip->ioh]);
- /* Initialize interrupt ien register */
- iowrite32(0, &chip->reg->ien);
end:
return 0;