aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-10 10:55:52 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-01-10 10:55:52 -0800
commitdbe950f201a8edd353b0bd9079e8d536ee4ce37c (patch)
treedffbada6b3d33cc67383758570de22b4f45693b6
parentf62f61917d72c1fb0101ad405664f6fc868d676b (diff)
parentda733563be5a9da26fe81d9f007262d00b846e22 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tc3589x-keypad - add missing kerneldoc Input: ucb1400-ts - switch to using dev_xxx() for diagnostic messages Input: ucb1400_ts - convert to threaded IRQ Input: ucb1400_ts - drop inline annotations Input: usb1400_ts - add __devinit/__devexit section annotations Input: ucb1400_ts - set driver owner Input: ucb1400_ts - convert to use dev_pm_ops Input: psmouse - make sure we do not use stale methods Input: evdev - do not block waiting for an event if fd is nonblock Input: evdev - if no events and non-block, return EAGAIN not 0 Input: evdev - only allow reading events if a full packet is present Input: add driver for pixcir i2c touchscreens Input: samsung-keypad - implement runtime power management support Input: tegra-kbc - report wakeup key for some platforms Input: tegra-kbc - add device tree bindings Input: add driver for AUO In-Cell touchscreens using pixcir ICs Input: mpu3050 - configure the sampling method Input: mpu3050 - ensure we enable interrupts Input: mpu3050 - add of_match table for device-tree probing Input: sentelic - document the latest hardware ... Fix up fairly trivial conflicts (device tree matching conflicting with some independent cleanups) in drivers/input/keyboard/samsung-keypad.c
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom17
-rw-r--r--Documentation/devicetree/bindings/input/tegra-kbc.txt18
-rw-r--r--Documentation/input/alps.txt188
-rw-r--r--Documentation/input/gpio-tilt.txt103
-rw-r--r--Documentation/input/sentelic.txt364
-rw-r--r--arch/arm/mach-tegra/include/mach/kbc.h1
-rw-r--r--arch/arm/plat-samsung/include/plat/keypad.h27
-rw-r--r--drivers/input/evdev.c20
-rw-r--r--drivers/input/input-polldev.c8
-rw-r--r--drivers/input/keyboard/Kconfig21
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/adp5520-keys.c13
-rw-r--r--drivers/input/keyboard/amikbd.c15
-rw-r--r--drivers/input/keyboard/atkbd.c40
-rw-r--r--drivers/input/keyboard/bf54x-keys.c16
-rw-r--r--drivers/input/keyboard/davinci_keyscan.c13
-rw-r--r--drivers/input/keyboard/ep93xx_keypad.c14
-rw-r--r--drivers/input/keyboard/gpio_keys_polled.c14
-rw-r--r--drivers/input/keyboard/imx_keypad.c14
-rw-r--r--drivers/input/keyboard/jornada680_kbd.c14
-rw-r--r--drivers/input/keyboard/jornada720_kbd.c14
-rw-r--r--drivers/input/keyboard/lm8323.c11
-rw-r--r--drivers/input/keyboard/matrix_keypad.c14
-rw-r--r--drivers/input/keyboard/nomadik-ske-keypad.c15
-rw-r--r--drivers/input/keyboard/omap-keypad.c15
-rw-r--r--drivers/input/keyboard/omap4-keypad.c13
-rw-r--r--drivers/input/keyboard/opencores-kbd.c13
-rw-r--r--drivers/input/keyboard/pmic8xxx-keypad.c13
-rw-r--r--drivers/input/keyboard/pxa27x_keypad.c14
-rw-r--r--drivers/input/keyboard/pxa930_rotary.c13
-rw-r--r--drivers/input/keyboard/samsung-keypad.c108
-rw-r--r--drivers/input/keyboard/sh_keysc.c14
-rw-r--r--drivers/input/keyboard/spear-keyboard.c13
-rw-r--r--drivers/input/keyboard/stmpe-keypad.c13
-rw-r--r--drivers/input/keyboard/tc3589x-keypad.c15
-rw-r--r--drivers/input/keyboard/tca8418_keypad.c430
-rw-r--r--drivers/input/keyboard/tegra-kbc.c132
-rw-r--r--drivers/input/keyboard/tnetv107x-keypad.c14
-rw-r--r--drivers/input/keyboard/twl4030_keypad.c13
-rw-r--r--drivers/input/keyboard/w90p910_keypad.c14
-rw-r--r--drivers/input/misc/88pm860x_onkey.c13
-rw-r--r--drivers/input/misc/Kconfig25
-rw-r--r--drivers/input/misc/Makefile2
-rw-r--r--drivers/input/misc/ab8500-ponkey.c13
-rw-r--r--drivers/input/misc/adxl34x-spi.c1
-rw-r--r--drivers/input/misc/adxl34x.c16
-rw-r--r--drivers/input/misc/ati_remote2.c19
-rw-r--r--drivers/input/misc/bfin_rotary.c13
-rw-r--r--drivers/input/misc/cobalt_btns.c14
-rw-r--r--drivers/input/misc/dm355evm_keys.c13
-rw-r--r--drivers/input/misc/gp2ap002a00f.c299
-rw-r--r--drivers/input/misc/gpio_tilt_polled.c213
-rw-r--r--drivers/input/misc/ixp4xx-beeper.c13
-rw-r--r--drivers/input/misc/max8925_onkey.c13
-rw-r--r--drivers/input/misc/mc13783-pwrbutton.c14
-rw-r--r--drivers/input/misc/mpu3050.c128
-rw-r--r--drivers/input/misc/pcap_keys.c14
-rw-r--r--drivers/input/misc/pcf50633-input.c13
-rw-r--r--drivers/input/misc/pcspkr.c14
-rw-r--r--drivers/input/misc/pm8xxx-vibrator.c13
-rw-r--r--drivers/input/misc/pmic8xxx-pwrkey.c13
-rw-r--r--drivers/input/misc/pwm-beeper.c13
-rw-r--r--drivers/input/misc/rb532_button.c14
-rw-r--r--drivers/input/misc/rotary_encoder.c14
-rw-r--r--drivers/input/misc/sgi_btns.c13
-rw-r--r--drivers/input/misc/twl4030-pwrbutton.c15
-rw-r--r--drivers/input/misc/twl4030-vibra.c14
-rw-r--r--drivers/input/misc/twl6040-vibra.c13
-rw-r--r--drivers/input/misc/wm831x-on.c13
-rw-r--r--drivers/input/mouse/alps.c1036
-rw-r--r--drivers/input/mouse/alps.h19
-rw-r--r--drivers/input/mouse/amimouse.c16
-rw-r--r--drivers/input/mouse/elantech.c80
-rw-r--r--drivers/input/mouse/elantech.h2
-rw-r--r--drivers/input/mouse/gpio_mouse.c13
-rw-r--r--drivers/input/mouse/hgpk.c18
-rw-r--r--drivers/input/mouse/logips2pp.c9
-rw-r--r--drivers/input/mouse/psmouse-base.c229
-rw-r--r--drivers/input/mouse/psmouse.h3
-rw-r--r--drivers/input/mouse/pxa930_trkball.c14
-rw-r--r--drivers/input/mouse/sentelic.c43
-rw-r--r--drivers/input/mouse/synaptics.c197
-rw-r--r--drivers/input/mouse/synaptics.h5
-rw-r--r--drivers/input/mouse/trackpoint.c17
-rw-r--r--drivers/input/serio/altera_ps2.c13
-rw-r--r--drivers/input/serio/at32psif.c14
-rw-r--r--drivers/input/serio/i8042.c23
-rw-r--r--drivers/input/serio/rpckbd.c14
-rw-r--r--drivers/input/serio/xilinx_ps2.c14
-rw-r--r--drivers/input/tablet/aiptek.c34
-rw-r--r--drivers/input/tablet/wacom_sys.c101
-rw-r--r--drivers/input/tablet/wacom_wac.c187
-rw-r--r--drivers/input/tablet/wacom_wac.h5
-rw-r--r--drivers/input/touchscreen/88pm860x-ts.c13
-rw-r--r--drivers/input/touchscreen/Kconfig41
-rw-r--r--drivers/input/touchscreen/Makefile3
-rw-r--r--drivers/input/touchscreen/ad7877.c17
-rw-r--r--drivers/input/touchscreen/ad7879-i2c.c31
-rw-r--r--drivers/input/touchscreen/ad7879-spi.c27
-rw-r--r--drivers/input/touchscreen/ad7879.c23
-rw-r--r--drivers/input/touchscreen/ad7879.h4
-rw-r--r--drivers/input/touchscreen/ads7846.c9
-rw-r--r--drivers/input/touchscreen/atmel-wm97xx.c13
-rw-r--r--drivers/input/touchscreen/atmel_tsadcc.c15
-rw-r--r--drivers/input/touchscreen/auo-pixcir-ts.c652
-rw-r--r--drivers/input/touchscreen/da9034-ts.c13
-rw-r--r--drivers/input/touchscreen/egalax_ts.c303
-rw-r--r--drivers/input/touchscreen/htcpen.c7
-rw-r--r--drivers/input/touchscreen/intel-mid-touch.c13
-rw-r--r--drivers/input/touchscreen/jornada720_ts.c14
-rw-r--r--drivers/input/touchscreen/lpc32xx_ts.c13
-rw-r--r--drivers/input/touchscreen/mainstone-wm97xx.c14
-rw-r--r--drivers/input/touchscreen/mc13783_ts.c13
-rw-r--r--drivers/input/touchscreen/migor_ts.c117
-rw-r--r--drivers/input/touchscreen/pcap_ts.c14
-rw-r--r--drivers/input/touchscreen/pixcir_i2c_ts.c239
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c14
-rw-r--r--drivers/input/touchscreen/stmpe-ts.c15
-rw-r--r--drivers/input/touchscreen/tnetv107x-ts.c14
-rw-r--r--drivers/input/touchscreen/tps6507x-ts.c13
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c287
-rw-r--r--drivers/input/touchscreen/usbtouchscreen.c36
-rw-r--r--drivers/input/touchscreen/w90p910_ts.c14
-rw-r--r--drivers/input/touchscreen/wm831x-ts.c13
-rw-r--r--drivers/input/touchscreen/zylonite-wm97xx.c14
-rw-r--r--include/linux/input/auo-pixcir-ts.h56
-rw-r--r--include/linux/input/gp2ap002a00f.h22
-rw-r--r--include/linux/input/gpio_tilt.h73
-rw-r--r--include/linux/input/pixcir_ts.h10
-rw-r--r--include/linux/input/samsung-keypad.h43
-rw-r--r--include/linux/input/tca8418_keypad.h44
-rw-r--r--include/linux/ucb1400.h6
132 files changed, 5550 insertions, 1645 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index 82d4df13644..0130d6683c1 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -15,9 +15,9 @@ Contact: linux-input@vger.kernel.org
Description:
Attribute group for control of the status LEDs and the OLEDs.
This attribute group is only available for Intuos 4 M, L,
- and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
- Therefore its presence implicitly signifies the presence of
- said LEDs and OLEDs on the tablet device.
+ and XL (with LEDs and OLEDs) and Cintiq 21UX2 and Cintiq 24HD
+ (LEDs only). Therefore its presence implicitly signifies the
+ presence of said LEDs and OLEDs on the tablet device.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
Date: August 2011
@@ -41,16 +41,17 @@ Date: August 2011
Contact: linux-input@vger.kernel.org
Description:
Writing to this file sets which one of the four (for Intuos 4)
- or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
- The other three LEDs on the same side are always inactive.
+ or of the right four (for Cintiq 21UX2 and Cintiq 24HD) status
+ LEDs is active (0..3). The other three LEDs on the same side are
+ always inactive.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
Date: September 2011
Contact: linux-input@vger.kernel.org
Description:
- Writing to this file sets which one of the left four (for Cintiq 21UX2)
- status LEDs is active (0..3). The other three LEDs on the left are always
- inactive.
+ Writing to this file sets which one of the left four (for Cintiq 21UX2
+ and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
+ the left are always inactive.
What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
Date: August 2011
diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/tegra-kbc.txt
new file mode 100644
index 00000000000..5ecfa99089b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/tegra-kbc.txt
@@ -0,0 +1,18 @@
+* Tegra keyboard controller
+
+Required properties:
+- compatible: "nvidia,tegra20-kbc"
+
+Optional properties:
+- debounce-delay: delay in milliseconds per row scan for debouncing
+- repeat-delay: delay in milliseconds before repeat starts
+- ghost-filter: enable ghost filtering for this device
+- wakeup-source: configure keyboard as a wakeup source for suspend/resume
+
+Example:
+
+keyboard: keyboard {
+ compatible = "nvidia,tegra20-kbc";
+ reg = <0x7000e200 0x100>;
+ ghost-filter;
+};
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
new file mode 100644
index 00000000000..f274c28b510
--- /dev/null
+++ b/Documentation/input/alps.txt
@@ -0,0 +1,188 @@
+ALPS Touchpad Protocol
+----------------------
+
+Introduction
+------------
+
+Currently the ALPS touchpad driver supports four protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
+protocol versions is contained in the following sections.
+
+Detection
+---------
+
+All ALPS touchpads should respond to the "E6 report" command sequence:
+E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
+00-00-64.
+
+If the E6 report is successful, the touchpad model is identified using the "E7
+report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
+matched against known models in the alps_model_data_array.
+
+With protocol versions 3 and 4, the E7 report model signature is always
+73-02-64. To differentiate between these versions, the response from the
+"Enter Command Mode" sequence must be inspected as described below.
+
+Command Mode
+------------
+
+Protocol versions 3 and 4 have a command mode that is used to read and write
+one-byte device registers in a 16-bit address space. The command sequence
+EC-EC-EC-E9 places the device in command mode, and the device will respond
+with 88-07 followed by a third byte. This third byte can be used to determine
+whether the devices uses the version 3 or 4 protocol.
+
+To exit command mode, PSMOUSE_CMD_SETSTREAM (EA) is sent to the touchpad.
+
+While in command mode, register addresses can be set by first sending a
+specific command, either EC for v3 devices or F5 for v4 devices. Then the
+address is sent one nibble at a time, where each nibble is encoded as a
+command with optional data. This enoding differs slightly between the v3 and
+v4 protocols.
+
+Once an address has been set, the addressed register can be read by sending
+PSMOUSE_CMD_GETINFO (E9). The first two bytes of the response contains the
+address of the register being read, and the third contains the value of the
+register. Registers are written by writing the value one nibble at a time
+using the same encoding used for addresses.
+
+Packet Format
+-------------
+
+In the following tables, the following notation is used.
+
+ CAPITALS = stick, miniscules = touchpad
+
+?'s can have different meanings on different models, such as wheel rotation,
+extra buttons, stick buttons on a dualpoint, etc.
+
+PS/2 packet format
+------------------
+
+ byte 0: 0 0 YSGN XSGN 1 M R L
+ byte 1: X7 X6 X5 X4 X3 X2 X1 X0
+ byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+
+Note that the device never signals overflow condition.
+
+ALPS Absolute Mode - Protocol Verion 1
+--------------------------------------
+
+ byte 0: 1 0 0 0 1 x9 x8 x7
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 ? ? l r ? fin ges
+ byte 3: 0 ? ? ? ? y9 y8 y7
+ byte 4: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+ALPS Absolute Mode - Protocol Version 2
+---------------------------------------
+
+ byte 0: 1 ? ? ? 1 ? ? ?
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 x10 x9 x8 x7 ? fin ges
+ byte 3: 0 y9 y8 y7 1 M R L
+ byte 4: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+Dualpoint device -- interleaved packet format
+---------------------------------------------
+
+ byte 0: 1 1 0 0 1 1 1 1
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 x10 x9 x8 x7 0 fin ges
+ byte 3: 0 0 YSGN XSGN 1 1 1 1
+ byte 4: X7 X6 X5 X4 X3 X2 X1 X0
+ byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ byte 6: 0 y9 y8 y7 1 m r l
+ byte 7: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 8: 0 z6 z5 z4 z3 z2 z1 z0
+
+ALPS Absolute Mode - Protocol Version 3
+---------------------------------------
+
+ALPS protocol version 3 has three different packet formats. The first two are
+associated with touchpad events, and the third is associatd with trackstick
+events.
+
+The first type is the touchpad position packet.
+
+ byte 0: 1 ? x1 x0 1 1 1 1
+ byte 1: 0 x10 x9 x8 x7 x6 x5 x4
+ byte 2: 0 y10 y9 y8 y7 y6 y5 y4
+ byte 3: 0 M R L 1 m r l
+ byte 4: 0 mt x3 x2 y3 y2 y1 y0
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+
+Note that for some devices the trackstick buttons are reported in this packet,
+and on others it is reported in the trackstick packets.
+
+The second packet type contains bitmaps representing the x and y axes. In the
+bitmaps a given bit is set if there is a finger covering that position on the
+given axis. Thus the bitmap packet can be used for low-resolution multi-touch
+data, although finger tracking is not possible. This packet also encodes the
+number of contacts (f1 and f0 in the table below).
+
+ byte 0: 1 1 x1 x0 1 1 1 1
+ byte 1: 0 x8 x7 x6 x5 x4 x3 x2
+ byte 2: 0 y7 y6 y5 y4 y3 y2 y1
+ byte 3: 0 y10 y9 y8 1 1 1 1
+ byte 4: 0 x14 x13 x12 x11 x10 x9 y0
+ byte 5: 0 1 ? ? ? ? f1 f0
+
+This packet only appears after a position packet with the mt bit set, and
+ususally only appears when there are two or more contacts (although
+ocassionally it's seen with only a single contact).
+
+The final v3 packet type is the trackstick packet.
+
+ byte 0: 1 1 x7 y7 1 1 1 1
+ byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ byte 2: 0 y6 y5 y4 y3 y2 y1 y0
+ byte 3: 0 1 0 0 1 0 0 0
+ byte 4: 0 z4 z3 z2 z1 z0 ? ?
+ byte 5: 0 0 1 1 1 1 1 1
+
+ALPS Absolute Mode - Protocol Version 4
+---------------------------------------
+
+Protocol version 4 has an 8-byte packet format.
+
+ byte 0: 1 ? x1 x0 1 1 1 1
+ byte 1: 0 x10 x9 x8 x7 x6 x5 x4
+ byte 2: 0 y10 y9 y8 y7 y6 y5 y4
+ byte 3: 0 1 x3 x2 y3 y2 y1 y0
+ byte 4: 0 ? ? ? 1 ? r l
+ byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+ byte 6: bitmap data (described below)
+ byte 7: bitmap data (described below)
+
+The last two bytes represent a partial bitmap packet, with 3 full packets
+required to construct a complete bitmap packet. Once assembled, the 6-byte
+bitmap packet has the following format:
+
+ byte 0: 0 1 x7 x6 x5 x4 x3 x2
+ byte 1: 0 x1 x0 y4 y3 y2 y1 y0
+ byte 2: 0 0 ? x14 x13 x12 x11 x10
+ byte 3: 0 x9 x8 y9 y8 y7 y6 y5
+ byte 4: 0 0 0 0 0 0 0 0
+ byte 5: 0 0 0 0 0 0 0 y10
+
+There are several things worth noting here.
+
+ 1) In the bitmap data, bit 6 of byte 0 serves as a sync byte to
+ identify the first fragment of a bitmap packet.
+
+ 2) The bitmaps represent the same data as in the v3 bitmap packets, although
+ the packet layout is different.
+
+ 3) There doesn't seem to be a count of the contact points anywhere in the v4
+ protocol packets. Deriving a count of contact points must be done by
+ analyzing the bitmaps.
+
+ 4) There is a 3 to 1 ratio of position packets to bitmap packets. Therefore
+ MT position can only be updated for every third ST position update, and
+ the count of contact points can only be updated every third packet as
+ well.
+
+So far no v4 devices with tracksticks have been encountered.
diff --git a/Documentation/input/gpio-tilt.txt b/Documentation/input/gpio-tilt.txt
new file mode 100644
index 00000000000..06d60c3ff5e
--- /dev/null
+++ b/Documentation/input/gpio-tilt.txt
@@ -0,0 +1,103 @@
+Driver for tilt-switches connected via GPIOs
+============================================
+
+Generic driver to read data from tilt switches connected via gpios.
+Orientation can be provided by one or more than one tilt switches,
+i.e. each tilt switch providing one axis, and the number of axes
+is also not limited.
+
+
+Data structures:
+----------------
+
+The array of struct gpio in the gpios field is used to list the gpios
+that represent the current tilt state.
+
+The array of struct gpio_tilt_axis describes the axes that are reported
+to the input system. The values set therein are used for the
+input_set_abs_params calls needed to init the axes.
+
+The array of struct gpio_tilt_state maps gpio states to the corresponding
+values to report. The gpio state is represented as a bitfield where the
+bit-index corresponds to the index of the gpio in the struct gpio array.
+In the same manner the values stored in the axes array correspond to
+the elements of the gpio_tilt_axis-array.
+
+
+Example:
+--------
+
+Example configuration for a single TS1003 tilt switch that rotates around
+one axis in 4 steps and emitts the current tilt via two GPIOs.
+
+static int sg060_tilt_enable(struct device *dev) {
+ /* code to enable the sensors */
+};
+
+static void sg060_tilt_disable(struct device *dev) {
+ /* code to disable the sensors */
+};
+
+static struct gpio sg060_tilt_gpios[] = {
+ { SG060_TILT_GPIO_SENSOR1, GPIOF_IN, "tilt_sensor1" },
+ { SG060_TILT_GPIO_SENSOR2, GPIOF_IN, "tilt_sensor2" },
+};
+
+static struct gpio_tilt_state sg060_tilt_states[] = {
+ {
+ .gpios = (0 << 1) | (0 << 0),
+ .axes = (int[]) {
+ 0,
+ },
+ }, {
+ .gpios = (0 << 1) | (1 << 0),
+ .axes = (int[]) {
+ 1, /* 90 degrees */
+ },
+ }, {
+ .gpios = (1 << 1) | (1 << 0),
+ .axes = (int[]) {
+ 2, /* 180 degrees */
+ },
+ }, {
+ .gpios = (1 << 1) | (0 << 0),
+ .axes = (int[]) {
+ 3, /* 270 degrees */
+ },
+ },
+};
+
+static struct gpio_tilt_axis sg060_tilt_axes[] = {
+ {
+ .axis = ABS_RY,
+ .min = 0,
+ .max = 3,
+ .fuzz = 0,
+ .flat = 0,
+ },
+};
+
+static struct gpio_tilt_platform_data sg060_tilt_pdata= {
+ .gpios = sg060_tilt_gpios,
+ .nr_gpios = ARRAY_SIZE(sg060_tilt_gpios),
+
+ .axes = sg060_tilt_axes,
+ .nr_axes = ARRAY_SIZE(sg060_tilt_axes),
+
+ .states = sg060_tilt_states,
+ .nr_states = ARRAY_SIZE(sg060_tilt_states),
+
+ .debounce_interval = 100,
+
+ .poll_interval = 1000,
+ .enable = sg060_tilt_enable,
+ .disable = sg060_tilt_disable,
+};
+
+static struct platform_device sg060_device_tilt = {
+ .name = "gpio-tilt-polled",
+ .id = -1,
+ .dev = {
+ .platform_data = &sg060_tilt_pdata,
+ },
+};
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index b2ef125b71f..89251e2a3eb 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -1,5 +1,5 @@
-Copyright (C) 2002-2010 Sentelic Corporation.
-Last update: Jan-13-2010
+Copyright (C) 2002-2011 Sentelic Corporation.
+Last update: Dec-07-2011
==============================================================================
* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -140,6 +140,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordination packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
When both fingers are up, the last two reports have zero valid
bit.
@@ -164,6 +165,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordinates packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
When both fingers are up, the last two reports have zero valid
bit.
@@ -188,6 +190,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordinates packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => 1
Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
0: left button is generated by the on-pad command
@@ -205,7 +208,7 @@ Byte 4: Bit7 => scroll right button
Bit6 => scroll left button
Bit5 => scroll down button
Bit4 => scroll up button
- * Note that if gesture and additional buttoni (Bit4~Bit7)
+ * Note that if gesture and additional button (Bit4~Bit7)
happen at the same time, the button information will not
be sent.
Bit3~Bit0 => Reserved
@@ -227,6 +230,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordinates packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
When both fingers are up, the last two reports have zero valid
bit.
@@ -253,6 +257,7 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordination packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
When both fingers are up, the last two reports have zero valid
bit.
@@ -279,8 +284,9 @@ BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------
Byte 1: Bit7~Bit6 => 00, Normal data packet
=> 01, Absolute coordination packet
=> 10, Notify packet
+ => 11, Normal data packet with on-pad click
Bit5 => 1
- Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+ Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
0: left button is generated by the on-pad command
1: left button is generated by the external button
Bit3 => 1
@@ -307,6 +313,110 @@ Sample sequence of Multi-finger, Multi-coordinate mode:
abs pkt 2, ..., notify packet (valid bit == 0)
==============================================================================
+* Absolute position for STL3888-Cx and STL3888-Dx.
+==============================================================================
+Single Finger, Absolute Coordinate Mode (SFAC)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|0|P|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Coordinate mode(always 0 in SFAC mode):
+ 0: single-finger absolute coordinates (SFAC) mode
+ 1: multi-finger, multiple coordinates (MFMC) mode
+ Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => Always 1, as specified by PS/2 protocol.
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => 4th mouse button(forward one page)
+ Bit5 => 5th mouse button(backward one page)
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Multi Finger, Multiple Coordinates Mode (MFMC):
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|1|P|1|F|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|B|F|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => Coordinate mode (always 1 in MFMC mode):
+ 0: single-finger absolute coordinates (SFAC) mode
+ 1: multi-finger, multiple coordinates (MFMC) mode
+ Bit4 => 0: The LEFT button is generated by on-pad command (OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => Always 1, as specified by PS/2 protocol.
+ Bit2 => Finger index, 0 is the first finger, 1 is the second finger.
+ If bit 1 and 0 are all 1 and bit 4 is 0, the middle external
+ button is pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => 4th mouse button(forward one page)
+ Bit5 => 5th mouse button(backward one page)
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+ When one of the two fingers is up, the device will output four consecutive
+MFMC#0 report packets with zero X and Y to represent 1st finger is up or
+four consecutive MFMC#1 report packets with zero X and Y to represent that
+the 2nd finger is up. On the other hand, if both fingers are up, the device
+will output four consecutive single-finger, absolute coordinate(SFAC) packets
+with zero X and Y.
+
+Notify Packet for STL3888-Cx/Dx
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|0|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Always 0
+ Bit4 => 0: The LEFT button is generated by on-pad command(OPC)
+ 1: The LEFT button is generated by external button
+ Default is 1 even if the LEFT button is not pressed.
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message type:
+ 0xba => gesture information
+ 0xc0 => one finger hold-rotating gesture
+Byte 3: The first parameter for the received message:
+ 0xba => gesture ID (refer to the 'Gesture ID' section)
+ 0xc0 => region ID
+Byte 4: The second parameter for the received message:
+ 0xba => N/A
+ 0xc0 => finger up/down information
+
+Sample sequence of Multi-finger, Multi-coordinates mode:
+
+ notify packet (valid bit == 1), MFMC packet 1 (byte 1, bit 2 == 0),
+ MFMC packet 2 (byte 1, bit 2 == 1), MFMC packet 1, MFMC packet 2,
+ ..., notify packet (valid bit == 0)
+
+ That is, when the device is in MFMC mode, the host will receive
+ interleaved absolute coordinate packets for each finger.
+
+==============================================================================
* FSP Enable/Disable packet
==============================================================================
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
@@ -348,9 +458,10 @@ http://www.computer-engineering.org/ps2mouse/
==============================================================================
1. Identify FSP by reading device ID(0x00) and version(0x01) register
-2. Determine number of buttons by reading status2 (0x0b) register
+2a. For FSP version < STL3888 Cx, determine number of buttons by reading
+ the 'test mode status' (0x20) register:
- buttons = reg[0x0b] & 0x30
+ buttons = reg[0x20] & 0x30
if buttons == 0x30 or buttons == 0x20:
# two/four buttons
@@ -365,6 +476,10 @@ http://www.computer-engineering.org/ps2mouse/
Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
section A for packet parsing detail
+2b. For FSP version >= STL3888 Cx:
+ Refer to 'Finger Sensing Pad PS/2 Mouse Intellimouse'
+ section A for packet parsing detail (ignore byte 4, bit ~ 7)
+
==============================================================================
* Programming Sequence for Register Reading/Writing
==============================================================================
@@ -374,7 +489,7 @@ Register inversion requirement:
Following values needed to be inverted(the '~' operator in C) before being
sent to FSP:
- 0xe9, 0xee, 0xf2 and 0xff.
+ 0xe8, 0xe9, 0xee, 0xf2, 0xf3 and 0xff.
Register swapping requirement:
@@ -415,7 +530,18 @@ Register reading sequence:
8. send 0xe9(status request) PS/2 command to FSP;
- 9. the response read from FSP should be the requested register value.
+ 9. the 4th byte of the response read from FSP should be the
+ requested register value(?? indicates don't care byte):
+
+ host: 0xe9
+ 3888: 0xfa (??) (??) (val)
+
+ * Note that since the Cx release, the hardware will return 1's
+ complement of the register value at the 3rd byte of status request
+ result:
+
+ host: 0xe9
+ 3888: 0xfa (??) (~val) (val)
Register writing sequence:
@@ -465,71 +591,194 @@ Register writing sequence:
9. the register writing sequence is completed.
+ * Note that since the Cx release, the hardware will return 1's
+ complement of the register value at the 3rd byte of status request
+ result. Host can optionally send another 0xe9 (status request) PS/2
+ command to FSP at the end of register writing to verify that the
+ register writing operation is successful (?? indicates don't care
+ byte):
+
+ host: 0xe9
+ 3888: 0xfa (??) (~val) (val)
+
+==============================================================================
+* Programming Sequence for Page Register Reading/Writing
+==============================================================================
+
+ In order to overcome the limitation of maximum number of registers
+supported, the hardware separates register into different groups called
+'pages.' Each page is able to include up to 255 registers.
+
+ The default page after power up is 0x82; therefore, if one has to get
+access to register 0x8301, one has to use following sequence to switch
+to page 0x83, then start reading/writing from/to offset 0x01 by using
+the register read/write sequence described in previous section.
+
+Page register reading sequence:
+
+ 1. send 0xf3 PS/2 command to FSP;
+
+ 2. send 0x66 PS/2 command to FSP;
+
+ 3. send 0x88 PS/2 command to FSP;
+
+ 4. send 0xf3 PS/2 command to FSP;
+
+ 5. send 0x83 PS/2 command to FSP;
+
+ 6. send 0x88 PS/2 command to FSP;
+
+ 7. send 0xe9(status request) PS/2 command to FSP;
+
+ 8. the response read from FSP should be the requested page value.
+
+Page register writing sequence:
+
+ 1. send 0xf3 PS/2 command to FSP;
+
+ 2. send 0x38 PS/2 command to FSP;
+
+ 3. send 0x88 PS/2 command to FSP;
+
+ 4. send 0xf3 PS/2 command to FSP;
+
+ 5. if the page address being written is not required to be
+ inverted(refer to the 'Register inversion requirement' section),
+ goto step 6
+
+ 5a. send 0x47 PS/2 command to FSP;
+
+ 5b. send the inverted page address to FSP and goto step 9;
+
+ 6. if the page address being written is not required to be
+ swapped(refer to the 'Register swapping requirement' section),
+ goto step 7
+
+ 6a. send 0x44 PS/2 command to FSP;
+
+ 6b. send the swapped page address to FSP and goto step 9;
+
+ 7. send 0x33 PS/2 command to FSP;
+
+ 8. send the page address to FSP;
+
+ 9. the page register writing sequence is completed.
+
+==============================================================================
+* Gesture ID
+==============================================================================
+
+ Unlike other devices which sends multiple fingers' coordinates to host,
+FSP processes multiple fingers' coordinates internally and convert them
+into a 8 bits integer, namely 'Gesture ID.' Following is a list of
+supported gesture IDs:
+
+ ID Description
+ 0x86 2 finger straight up
+ 0x82 2 finger straight down
+ 0x80 2 finger straight right
+ 0x84 2 finger straight left
+ 0x8f 2 finger zoom in
+ 0x8b 2 finger zoom out
+ 0xc0 2 finger curve, counter clockwise
+ 0xc4 2 finger curve, clockwise
+ 0x2e 3 finger straight up
+ 0x2a 3 finger straight down
+ 0x28 3 finger straight right
+ 0x2c 3 finger straight left
+ 0x38 palm
+
==============================================================================
* Register Listing
==============================================================================
+ Registers are represented in 16 bits values. The higher 8 bits represent
+the page address and the lower 8 bits represent the relative offset within
+that particular page. Refer to the 'Programming Sequence for Page Register
+Reading/Writing' section for instructions on how to change current page
+address.
+
offset width default r/w name
-0x00 bit7~bit0 0x01 RO device ID
+0x8200 bit7~bit0 0x01 RO device ID
-0x01 bit7~bit0 0xc0 RW version ID
+0x8201 bit7~bit0 RW version ID
+ 0xc1: STL3888 Ax
+ 0xd0 ~ 0xd2: STL3888 Bx
+ 0xe0 ~ 0xe1: STL3888 Cx
+ 0xe2 ~ 0xe3: STL3888 Dx
-0x02 bit7~bit0 0x01 RO vendor ID
+0x8202 bit7~bit0 0x01 RO vendor ID
-0x03 bit7~bit0 0x01 RO product ID
+0x8203 bit7~bit0 0x01 RO product ID
-0x04 bit3~bit0 0x01 RW revision ID
+0x8204 bit3~bit0 0x01 RW revision ID
-0x0b RO test mode status 1
- bit3 1 RO 0: rotate 180 degree, 1: no rotation
+0x820b test mode status 1
+ bit3 1 RO 0: rotate 180 degree
+ 1: no rotation
+ *only supported by H/W prior to Cx
- bit5~bit4 RO number of buttons
- 11 => 2, lbtn/rbtn
- 10 => 4, lbtn/rbtn/scru/scrd
- 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
- 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
+0x820f register file page control
+ bit2 0 RW 1: rotate 180 degree
+ 0: no rotation
+ *supported since Cx
-0x0f RW register file page control
bit0 0 RW 1 to enable page 1 register files
+ *only supported by H/W prior to Cx
-0x10 RW system control 1
+0x8210 RW system control 1
bit0 1 RW Reserved, must be 1
bit1 0 RW Reserved, must be 0
- bit4 1 RW Reserved, must be 0
- bit5 0 RW register clock gating enable
+ bit4 0 RW Reserved, must be 0
+ bit5 1 RW register clock gating enable
0: read only, 1: read/write enable
(Note that following registers does not require clock gating being
enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
40 41 42 43. In addition to that, this bit must be 1 when gesture
mode is enabled)
-0x31 RW on-pad command detection
+0x8220 test mode status
+ bit5~bit4 RO number of buttons
+ 11 => 2, lbtn/rbtn
+ 10 => 4, lbtn/rbtn/scru/scrd
+ 01 => 6, lbtn/rbtn/scru/scrd/scrl/scrr
+ 00 => 6, lbtn/rbtn/scru/scrd/fbtn/bbtn
+ *only supported by H/W prior to Cx
+
+0x8231 RW on-pad command detection
bit7 0 RW on-pad command left button down tag
enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
-0x34 RW on-pad command control 5
+0x8234 RW on-pad command control 5
bit4~bit0 0x05 RW XLO in 0s/4/1, so 03h = 0010.1b = 2.5
(Note that position unit is in 0.5 scanline)
+ *only supported by H/W prior to Cx
bit7 0 RW on-pad tap zone enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
-0x35 RW on-pad command control 6
+0x8235 RW on-pad command control 6
bit4~bit0 0x1d RW XHI in 0s/4/1, so 19h = 1100.1b = 12.5
(Note that position unit is in 0.5 scanline)
+ *only supported by H/W prior to Cx
-0x36 RW on-pad command control 7
+0x8236 RW on-pad command control 7
bit4~bit0 0x04 RW YLO in 0s/4/1, so 03h = 0010.1b = 2.5
(Note that position unit is in 0.5 scanline)
+ *only supported by H/W prior to Cx
-0x37 RW on-pad command control 8
+0x8237 RW on-pad command control 8
bit4~bit0 0x13 RW YHI in 0s/4/1, so 11h = 1000.1b = 8.5
(Note that position unit is in 0.5 scanline)
+ *only supported by H/W prior to Cx
-0x40 RW system control 5
+0x8240 RW system control 5
bit1 0 RW FSP Intellimouse mode enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
bit2 0 RW movement + abs. coordinate mode enable
0: disable, 1: enable
@@ -537,6 +786,7 @@ offset width default r/w name
bit 1 is not set. However, the format is different from that of bit 1.
In addition, when bit 1 and bit 2 are set at the same time, bit 2 will
override bit 1.)
+ *only supported by H/W prior to Cx
bit3 0 RW abs. coordinate only mode enable
0: disable, 1: enable
@@ -544,9 +794,11 @@ offset width default r/w name
bit 1 is not set. However, the format is different from that of bit 1.
In addition, when bit 1, bit 2 and bit 3 are set at the same time,
bit 3 will override bit 1 and 2.)
+ *only supported by H/W prior to Cx
bit5 0 RW auto switch enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
bit6 0 RW G0 abs. + notify packet format enable
0: disable, 1: enable
@@ -554,18 +806,68 @@ offset width default r/w name
bit 2 and 3. That is, if any of those bit is 1, host will receive
absolute coordinates; otherwise, host only receives packets with
relative coordinate.)
+ *only supported by H/W prior to Cx
bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd
finger packet enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
-0x43 RW on-pad control
+0x8243 RW on-pad control
bit0 0 RW on-pad control enable
0: disable, 1: enable
(Note that if this bit is cleared, bit 3/5 will be ineffective)
+ *only supported by H/W prior to Cx
bit3 0 RW on-pad fix vertical scrolling enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
bit5 0 RW on-pad fix horizontal scrolling enable
0: disable, 1: enable
+ *only supported by H/W prior to Cx
+
+0x8290 RW software control register 1
+ bit0 0 RW absolute coordination mode
+ 0: disable, 1: enable
+ *supported since Cx
+
+ bit1 0 RW gesture ID output
+ 0: disable, 1: enable
+ *supported since Cx
+
+ bit2 0 RW two fingers' coordinates output
+ 0: disable, 1: enable
+ *supported since Cx
+
+ bit3 0 RW finger up one packet output
+ 0: disable, 1: enable
+ *supported since Cx
+
+ bit4 0 RW absolute coordination continuous mode
+ 0: disable, 1: enable
+ *supported since Cx
+
+ bit6~bit5 00 RW gesture group selection
+ 00: basic
+ 01: suite
+ 10: suite pro
+ 11: advanced
+ *supported since Cx
+
+ bit7 0 RW Bx packet output compatible mode
+ 0: disable, 1: enable *supported since Cx
+ *supported since Cx
+
+
+0x833d RW on-pad command control 1
+ bit7 1 RW on-pad command detection enable
+ 0: disable, 1: enable
+ *supported since Cx
+
+0x833e RW on-pad command detection
+ bit7 0 RW on-pad command left button down tag
+ enable. Works only in H/W based PS/2
+ data packet mode.
+ 0: disable, 1: enable
+ *supported since Cx
diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h
index 4f3572a1c68..20bb0545f99 100644
--- a/arch/arm/mach-tegra/include/mach/kbc.h
+++ b/arch/arm/mach-tegra/include/mach/kbc.h
@@ -53,6 +53,7 @@ struct tegra_kbc_platform_data {
struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
const struct matrix_keymap_data *keymap_data;
+ u32 wakeup_key;
bool wakeup;
bool use_fn_map;
bool use_ghost_filter;
diff --git a/arch/arm/plat-samsung/include/plat/keypad.h b/arch/arm/plat-samsung/include/plat/keypad.h
index b59a6483cd8..c81ace332a1 100644
--- a/arch/arm/plat-samsung/include/plat/keypad.h
+++ b/arch/arm/plat-samsung/include/plat/keypad.h
@@ -13,32 +13,7 @@
#ifndef __PLAT_SAMSUNG_KEYPAD_H
#define __PLAT_SAMSUNG_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
-
-#define SAMSUNG_MAX_ROWS 8
-#define SAMSUNG_MAX_COLS 8
-
-/**
- * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
- * @keymap_data: pointer to &matrix_keymap_data.
- * @rows: number of keypad row supported.
- * @cols: number of keypad col supported.
- * @no_autorepeat: disable key autorepeat.
- * @wakeup: controls whether the device should be set up as wakeup source.
- * @cfg_gpio: configure the GPIO.
- *
- * Initialisation data specific to either the machine or the platform
- * for the device driver to use or call-back when configuring gpio.
- */
-struct samsung_keypad_platdata {
- const struct matrix_keymap_data *keymap_data;
- unsigned int rows;
- unsigned int cols;
- bool no_autorepeat;
- bool wakeup;
-
- void (*cfg_gpio)(unsigned int rows, unsigned int cols);
-};
+#include <linux/input/samsung-keypad.h>
/**
* samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 4cf25347b01..76457d50bc3 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -369,7 +369,7 @@ static int evdev_fetch_next_event(struct evdev_client *client,
spin_lock_irq(&client->buffer_lock);
- have_event = client->head != client->tail;
+ have_event = client->packet_head != client->tail;
if (have_event) {
*event = client->buffer[client->tail++];
client->tail &= client->bufsize - 1;
@@ -391,14 +391,13 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
if (count < input_event_size())
return -EINVAL;
- if (client->packet_head == client->tail && evdev->exist &&
- (file->f_flags & O_NONBLOCK))
- return -EAGAIN;
-
- retval = wait_event_interruptible(evdev->wait,
- client->packet_head != client->tail || !evdev->exist);
- if (retval)
- return retval;
+ if (!(file->f_flags & O_NONBLOCK)) {
+ retval = wait_event_interruptible(evdev->wait,
+ client->packet_head != client->tail ||
+ !evdev->exist);
+ if (retval)
+ return retval;
+ }
if (!evdev->exist)
return -ENODEV;
@@ -412,6 +411,9 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
retval += input_event_size();
}
+ if (retval == 0 && (file->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+
return retval;
}
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 7dfe1009fae..7f161d93203 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -84,10 +84,12 @@ static ssize_t input_polldev_set_poll(struct device *dev,
{
struct input_polled_dev *polldev = dev_get_drvdata(dev);
struct input_dev *input = polldev->input;
- unsigned long interval;
+ unsigned int interval;
+ int err;
- if (strict_strtoul(buf, 0, &interval))
- return -EINVAL;
+ err = kstrtouint(buf, 0, &interval);
+ if (err)
+ return err;
if (interval < polldev->poll_interval_min)
return -EINVAL;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 615c21f2a55..cdc385b2cf7 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -221,6 +221,22 @@ config KEYBOARD_TCA6416
To compile this driver as a module, choose M here: the
module will be called tca6416_keypad.
+config KEYBOARD_TCA8418
+ tristate "TCA8418 Keypad Support"
+ depends on I2C
+ help
+ This driver implements basic keypad functionality
+ for keys connected through TCA8418 keypad decoder.
+
+ Say Y here if your device has keys connected to
+ TCA8418 keypad decoder.
+
+ If enabled the complete TCA8418 device will be managed through
+ this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tca8418_keypad.
+
config KEYBOARD_MATRIX
tristate "GPIO driven matrix keypad support"
depends on GENERIC_GPIO
@@ -425,9 +441,10 @@ config KEYBOARD_PMIC8XXX
config KEYBOARD_SAMSUNG
tristate "Samsung keypad support"
- depends on SAMSUNG_DEV_KEYPAD
+ depends on HAVE_CLK
help
- Say Y here if you want to use the Samsung keypad.
+ Say Y here if you want to use the keypad on your Samsung mobile
+ device.
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index ddde0fd476f..df7061f1291 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
+obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
diff --git a/drivers/input/keyboard/adp5520-keys.c b/drivers/input/keyboard/adp5520-keys.c
index 3db8006dac3..e9e8674dfda 100644
--- a/drivers/input/keyboard/adp5520-keys.c
+++ b/drivers/input/keyboard/adp5520-keys.c
@@ -202,18 +202,7 @@ static struct platform_driver adp5520_keys_driver = {
.probe = adp5520_keys_probe,
.remove = __devexit_p(adp5520_keys_remove),
};
-
-static int __init adp5520_keys_init(void)
-{
- return platform_driver_register(&adp5520_keys_driver);
-}
-module_init(adp5520_keys_init);
-
-static void __exit adp5520_keys_exit(void)
-{
- platform_driver_unregister(&adp5520_keys_driver);
-}
-module_exit(adp5520_keys_exit);
+module_platform_driver(adp5520_keys_driver);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("Keys ADP5520 Driver");
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 79172af164f..6df5f6aa790 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -259,19 +259,6 @@ static struct platform_driver amikbd_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init amikbd_init(void)
-{
- return platform_driver_probe(&amikbd_driver, amikbd_probe);
-}
-
-module_init(amikbd_init);
-
-static void __exit amikbd_exit(void)
-{
- platform_driver_unregister(&amikbd_driver);
-}
-
-module_exit(amikbd_exit);
+module_platform_driver(amikbd_driver);
MODULE_ALIAS("platform:amiga-keyboard");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 19cfc0cf558..e05a2e7073c 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1305,7 +1305,7 @@ static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
{
struct input_dev *old_dev, *new_dev;
- unsigned long value;
+ unsigned int value;
int err;
bool old_extra;
unsigned char old_set;
@@ -1313,7 +1313,11 @@ static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t coun
if (!atkbd->write)
return -EIO;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
if (atkbd->extra != value) {
@@ -1389,11 +1393,15 @@ static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
{
struct input_dev *old_dev, *new_dev;
- unsigned long value;
+ unsigned int value;
int err;
bool old_scroll;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
if (atkbd->scroll != value) {
@@ -1433,7 +1441,7 @@ static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
{
struct input_dev *old_dev, *new_dev;
- unsigned long value;
+ unsigned int value;
int err;
unsigned char old_set;
bool old_extra;
@@ -1441,7 +1449,11 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
if (!atkbd->write)
return -EIO;
- if (strict_strtoul(buf, 10, &value) || (value != 2 && value != 3))
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value != 2 && value != 3)
return -EINVAL;
if (atkbd->set != value) {
@@ -1484,14 +1496,18 @@ static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
{
struct input_dev *old_dev, *new_dev;
- unsigned long value;
+ unsigned int value;
int err;
bool old_softrepeat, old_softraw;
if (!atkbd->write)
return -EIO;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
if (atkbd->softrepeat != value) {
@@ -1534,11 +1550,15 @@ static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
{
struct input_dev *old_dev, *new_dev;
- unsigned long value;
+ unsigned int value;
int err;
bool old_softraw;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
if (atkbd->softraw != value) {
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 7d989603f87..8eb9116e0a5 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -384,7 +384,7 @@ static int bfin_kpad_resume(struct platform_device *pdev)
# define bfin_kpad_resume NULL
#endif
-struct platform_driver bfin_kpad_device_driver = {
+static struct platform_driver bfin_kpad_device_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
@@ -394,19 +394,7 @@ struct platform_driver bfin_kpad_device_driver = {
.suspend = bfin_kpad_suspend,
.resume = bfin_kpad_resume,
};
-
-static int __init bfin_kpad_init(void)
-{
- return platform_driver_register(&bfin_kpad_device_driver);
-}
-
-static void __exit bfin_kpad_exit(void)
-{
- platform_driver_unregister(&bfin_kpad_device_driver);
-}
-
-module_init(bfin_kpad_init);
-module_exit(bfin_kpad_exit);
+module_platform_driver(bfin_kpad_device_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index 9d82b3aeff5..46982524755 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -328,18 +328,7 @@ static struct platform_driver davinci_ks_driver = {
},
.remove = __devexit_p(davinci_ks_remove),
};
-
-static int __init davinci_ks_init(void)
-{
- return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe);
-}
-module_init(davinci_ks_init);
-
-static void __exit davinci_ks_exit(void)
-{
- platform_driver_unregister(&davinci_ks_driver);
-}
-module_exit(davinci_ks_exit);
+module_platform_driver(davinci_ks_driver);
MODULE_AUTHOR("Miguel Aguilar");
MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver");
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 4662c5da801..0ba69f3fcb5 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -390,19 +390,7 @@ static struct platform_driver ep93xx_keypad_driver = {
.suspend = ep93xx_keypad_suspend,
.resume = ep93xx_keypad_resume,
};
-
-static int __init ep93xx_keypad_init(void)
-{
- return platform_driver_register(&ep93xx_keypad_driver);
-}
-
-static void __exit ep93xx_keypad_exit(void)
-{
- platform_driver_unregister(&ep93xx_keypad_driver);
-}
-
-module_init(ep93xx_keypad_init);
-module_exit(ep93xx_keypad_exit);
+module_platform_driver(ep93xx_keypad_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 4c17aff2065..20c8ab17221 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -241,19 +241,7 @@ static struct platform_driver gpio_keys_polled_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init gpio_keys_polled_init(void)
-{
- return platform_driver_register(&gpio_keys_polled_driver);
-}
-
-static void __exit gpio_keys_polled_exit(void)
-{
- platform_driver_unregister(&gpio_keys_polled_driver);
-}
-
-module_init(gpio_keys_polled_init);
-module_exit(gpio_keys_polled_exit);
+module_platform_driver(gpio_keys_polled_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index ccebd2d0915..fb87b3bcadb 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -619,19 +619,7 @@ static struct platform_driver imx_keypad_driver = {
.probe = imx_keypad_probe,
.remove = __devexit_p(imx_keypad_remove),
};
-
-static int __init imx_keypad_init(void)
-{
- return platform_driver_register(&imx_keypad_driver);
-}
-
-static void __exit imx_keypad_exit(void)
-{
- platform_driver_unregister(&imx_keypad_driver);
-}
-
-module_init(imx_keypad_init);
-module_exit(imx_keypad_exit);
+module_platform_driver(imx_keypad_driver);
MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>");
MODULE_DESCRIPTION("IMX Keypad Port Driver");
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index 7197c569874..24f3ea01c4d 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -260,19 +260,7 @@ static struct platform_driver jornada680kbd_driver = {
.probe = jornada680kbd_probe,
.remove = __devexit_p(jornada680kbd_remove),
};
-
-static int __init jornada680kbd_init(void)
-{
- return platform_driver_register(&jornada680kbd_driver);
-}
-
-static void __exit jornada680kbd_exit(void)
-{
- platform_driver_unregister(&jornada680kbd_driver);
-}
-
-module_init(jornada680kbd_init);
-module_exit(jornada680kbd_exit);
+module_platform_driver(jornada680kbd_driver);
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index 0aa6740e60d..eeafc30b207 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -174,16 +174,4 @@ static struct platform_driver jornada720_kbd_driver = {
.probe = jornada720_kbd_probe,
.remove = __devexit_p(jornada720_kbd_remove),
};
-
-static int __init jornada720_kbd_init(void)
-{
- return platform_driver_register(&jornada720_kbd_driver);
-}
-
-static void __exit jornada720_kbd_exit(void)
-{
- platform_driver_unregister(&jornada720_kbd_driver);
-}
-
-module_init(jornada720_kbd_init);
-module_exit(jornada720_kbd_exit);
+module_platform_driver(jornada720_kbd_driver);
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 82d1dc8badd..21823bfc791 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -545,13 +545,12 @@ static ssize_t lm8323_pwm_store_time(struct device *dev,
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct lm8323_pwm *pwm = cdev_to_pwm(led_cdev);
- int ret;
- unsigned long time;
+ int ret, time;
- ret = strict_strtoul(buf, 10, &time);
+ ret = kstrtoint(buf, 10, &time);
/* Numbers only, please. */
if (ret)
- return -EINVAL;
+ return ret;
pwm->fade_time = time;
@@ -613,9 +612,9 @@ static ssize_t lm8323_set_disable(struct device *dev,
{
struct lm8323_chip *lm = dev_get_drvdata(dev);
int ret;
- unsigned long i;
+ unsigned int i;
- ret = strict_strtoul(buf, 10, &i);
+ ret = kstrtouint(buf, 10, &i);
mutex_lock(&lm->lock);
lm->kp_enabled = !i;
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index e2ae657717e..9b223d73de3 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -496,19 +496,7 @@ static struct platform_driver matrix_keypad_driver = {
#endif
},
};
-
-static int __init matrix_keypad_init(void)
-{
- return platform_driver_register(&matrix_keypad_driver);
-}
-
-static void __exit matrix_keypad_exit(void)
-{
- platform_driver_unregister(&matrix_keypad_driver);
-}
-
-module_init(matrix_keypad_init);
-module_exit(matrix_keypad_exit);
+module_platform_driver(matrix_keypad_driver);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("GPIO Driven Matrix Keypad Driver");
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index fcdec5e2b29..5a71e55c9c5 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -379,7 +379,7 @@ static const struct dev_pm_ops ske_keypad_dev_pm_ops = {
};
#endif
-struct platform_driver ske_keypad_driver = {
+static struct platform_driver ske_keypad_driver = {
.driver = {
.name = "nmk-ske-keypad",
.owner = THIS_MODULE,
@@ -390,18 +390,7 @@ struct platform_driver ske_keypad_driver = {
.probe = ske_keypad_probe,
.remove = __devexit_p(ske_keypad_remove),
};
-
-static int __init ske_keypad_init(void)
-{
- return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
-}
-module_init(ske_keypad_init);
-
-static void __exit ske_keypad_exit(void)
-{
- platform_driver_unregister(&ske_keypad_driver);
-}
-module_exit(ske_keypad_exit);
+module_platform_driver(ske_keypad_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 323bcdfff24..6b630d9d3df 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -473,20 +473,7 @@ static struct platform_driver omap_kp_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init omap_kp_init(void)
-{
- printk(KERN_INFO "OMAP Keypad Driver\n");
- return platform_driver_register(&omap_kp_driver);
-}
-
-static void __exit omap_kp_exit(void)
-{
- platform_driver_unregister(&omap_kp_driver);
-}
-
-module_init(omap_kp_init);
-module_exit(omap_kp_exit);
+module_platform_driver(omap_kp_driver);
MODULE_AUTHOR("Timo Teräs");
MODULE_DESCRIPTION("OMAP Keypad Driver");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index c51a3c4a7fe..d5c5d77f4b8 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -335,18 +335,7 @@ static struct platform_driver omap4_keypad_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init omap4_keypad_init(void)
-{
- return platform_driver_register(&omap4_keypad_driver);
-}
-module_init(omap4_keypad_init);
-
-static void __exit omap4_keypad_exit(void)
-{
- platform_driver_unregister(&omap4_keypad_driver);
-}
-module_exit(omap4_keypad_exit);
+module_platform_driver(omap4_keypad_driver);
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("OMAP4 Keypad Driver");
diff --git a/drivers/input/keyboard/opencores-kbd.c b/drivers/input/keyboard/opencores-kbd.c
index 1f1a5563f60..abe728c7b88 100644
--- a/drivers/input/keyboard/opencores-kbd.c
+++ b/drivers/input/keyboard/opencores-kbd.c
@@ -163,18 +163,7 @@ static struct platform_driver opencores_kbd_device_driver = {
.name = "opencores-kbd",
},
};
-
-static int __init opencores_kbd_init(void)
-{
- return platform_driver_register(&opencores_kbd_device_driver);
-}
-module_init(opencores_kbd_init);
-
-static void __exit opencores_kbd_exit(void)
-{
- platform_driver_unregister(&opencores_kbd_device_driver);
-}
-module_exit(opencores_kbd_exit);
+module_platform_driver(opencores_kbd_device_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index e7cc51d0fb3..01a1c9f8a38 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -780,18 +780,7 @@ static struct platform_driver pmic8xxx_kp_driver = {
.pm = &pm8xxx_kp_pm_ops,
},
};
-
-static int __init pmic8xxx_kp_init(void)
-{
- return platform_driver_register(&pmic8xxx_kp_driver);
-}
-module_init(pmic8xxx_kp_init);
-
-static void __exit pmic8xxx_kp_exit(void)
-{
- platform_driver_unregister(&pmic8xxx_kp_driver);
-}
-module_exit(pmic8xxx_kp_exit);
+module_platform_driver(pmic8xxx_kp_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("PMIC8XXX keypad driver");
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index eca6ae63de1..29fe1b2be1c 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -602,19 +602,7 @@ static struct platform_driver pxa27x_keypad_driver = {
#endif
},
};
-
-static int __init pxa27x_keypad_init(void)
-{
- return platform_driver_register(&pxa27x_keypad_driver);
-}
-
-static void __exit pxa27x_keypad_exit(void)
-{
- platform_driver_unregister(&pxa27x_keypad_driver);
-}
-
-module_init(pxa27x_keypad_init);
-module_exit(pxa27x_keypad_exit);
+module_platform_driver(pxa27x_keypad_driver);
MODULE_DESCRIPTION("PXA27x Keypad Controller Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/pxa930_rotary.c b/drivers/input/keyboard/pxa930_rotary.c
index 35451bf780c..d7f1134b789 100644
--- a/drivers/input/keyboard/pxa930_rotary.c
+++ b/drivers/input/keyboard/pxa930_rotary.c
@@ -195,18 +195,7 @@ static struct platform_driver pxa930_rotary_driver = {
.probe = pxa930_rotary_probe,
.remove = __devexit_p(pxa930_rotary_remove),
};
-
-static int __init pxa930_rotary_init(void)
-{
- return platform_driver_register(&pxa930_rotary_driver);
-}
-module_init(pxa930_rotary_init);
-
-static void __exit pxa930_rotary_exit(void)
-{
- platform_driver_unregister(&pxa930_rotary_driver);
-}
-module_exit(pxa930_rotary_exit);
+module_platform_driver(pxa930_rotary_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Driver for PXA93x Enhanced Rotary Controller");
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 8a0060cd398..17ba7f9f80f 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -20,11 +20,13 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/sched.h>
-#include <plat/keypad.h>
+#include <linux/input/samsung-keypad.h>
#define SAMSUNG_KEYIFCON 0x00
#define SAMSUNG_KEYIFSTSCLR 0x04
@@ -65,10 +67,12 @@ enum samsung_keypad_type {
struct samsung_keypad {
struct input_dev *input_dev;
+ struct platform_device *pdev;
struct clk *clk;
void __iomem *base;
wait_queue_head_t wait;
bool stopped;
+ bool wake_enabled;
int irq;
enum samsung_keypad_type type;
unsigned int row_shift;
@@ -155,6 +159,8 @@ static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
unsigned int val;
bool key_down;
+ pm_runtime_get_sync(&keypad->pdev->dev);
+
do {
val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
/* Clear interrupt. */
@@ -169,6 +175,8 @@ static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
} while (key_down && !keypad->stopped);
+ pm_runtime_put_sync(&keypad->pdev->dev);
+
return IRQ_HANDLED;
}
@@ -176,6 +184,8 @@ static void samsung_keypad_start(struct samsung_keypad *keypad)
{
unsigned int val;
+ pm_runtime_get_sync(&keypad->pdev->dev);
+
/* Tell IRQ thread that it may poll the device. */
keypad->stopped = false;
@@ -188,12 +198,16 @@ static void samsung_keypad_start(struct samsung_keypad *keypad)
/* KEYIFCOL reg clear. */
writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+
+ pm_runtime_put_sync(&keypad->pdev->dev);
}
static void samsung_keypad_stop(struct samsung_keypad *keypad)
{
unsigned int val;
+ pm_runtime_get_sync(&keypad->pdev->dev);
+
/* Signal IRQ thread to stop polling and disable the handler. */
keypad->stopped = true;
wake_up(&keypad->wait);
@@ -214,6 +228,8 @@ static void samsung_keypad_stop(struct samsung_keypad *keypad)
* re-enable the handler.
*/
enable_irq(keypad->irq);
+
+ pm_runtime_put_sync(&keypad->pdev->dev);
}
static int samsung_keypad_open(struct input_dev *input_dev)
@@ -418,9 +434,11 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
}
keypad->input_dev = input_dev;
+ keypad->pdev = pdev;
keypad->row_shift = row_shift;
keypad->rows = pdata->rows;
keypad->cols = pdata->cols;
+ keypad->stopped = true;
init_waitqueue_head(&keypad->wait);
if (pdev->dev.of_node) {
@@ -467,13 +485,14 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
goto err_put_clk;
}
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+ platform_set_drvdata(pdev, keypad);
+ pm_runtime_enable(&pdev->dev);
+
error = input_register_device(keypad->input_dev);
if (error)
goto err_free_irq;
- device_init_wakeup(&pdev->dev, pdata->wakeup);
- platform_set_drvdata(pdev, keypad);
-
if (pdev->dev.of_node) {
devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
@@ -483,6 +502,9 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
err_free_irq:
free_irq(keypad->irq, keypad);
+ pm_runtime_disable(&pdev->dev);
+ device_init_wakeup(&pdev->dev, 0);
+ platform_set_drvdata(pdev, NULL);
err_put_clk:
clk_put(keypad->clk);
samsung_keypad_dt_gpio_free(keypad);
@@ -499,6 +521,7 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev)
{
struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+ pm_runtime_disable(&pdev->dev);
device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
@@ -519,11 +542,57 @@ static int __devexit samsung_keypad_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
+static int samsung_keypad_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+ unsigned int val;
+ int error;
+
+ if (keypad->stopped)
+ return 0;
+
+ /* This may fail on some SoCs due to lack of controller support */
+ error = enable_irq_wake(keypad->irq);
+ if (!error)
+ keypad->wake_enabled = true;
+
+ val = readl(keypad->base + SAMSUNG_KEYIFCON);
+ val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+ writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+ clk_disable(keypad->clk);
+
+ return 0;
+}
+
+static int samsung_keypad_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+ unsigned int val;
+
+ if (keypad->stopped)
+ return 0;
+
+ clk_enable(keypad->clk);
+
+ val = readl(keypad->base + SAMSUNG_KEYIFCON);
+ val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+ writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+ if (keypad->wake_enabled)
+ disable_irq_wake(keypad->irq);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
bool enable)
{
- struct device *dev = keypad->input_dev->dev.parent;
unsigned int val;
clk_enable(keypad->clk);
@@ -531,11 +600,11 @@ static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
val = readl(keypad->base + SAMSUNG_KEYIFCON);
if (enable) {
val |= SAMSUNG_KEYIFCON_WAKEUPEN;
- if (device_may_wakeup(dev))
+ if (device_may_wakeup(&keypad->pdev->dev))
enable_irq_wake(keypad->irq);
} else {
val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
- if (device_may_wakeup(dev))
+ if (device_may_wakeup(&keypad->pdev->dev))
disable_irq_wake(keypad->irq);
}
writel(val, keypad->base + SAMSUNG_KEYIFCON);
@@ -578,12 +647,13 @@ static int samsung_keypad_resume(struct device *dev)
return 0;
}
+#endif
static const struct dev_pm_ops samsung_keypad_pm_ops = {
- .suspend = samsung_keypad_suspend,
- .resume = samsung_keypad_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(samsung_keypad_suspend, samsung_keypad_resume)
+ SET_RUNTIME_PM_OPS(samsung_keypad_runtime_suspend,
+ samsung_keypad_runtime_resume, NULL)
};
-#endif
#ifdef CONFIG_OF
static const struct of_device_id samsung_keypad_dt_match[] = {
@@ -615,27 +685,13 @@ static struct platform_driver samsung_keypad_driver = {
.name = "samsung-keypad",
.owner = THIS_MODULE,
.of_match_table = samsung_keypad_dt_match,
-#ifdef CONFIG_PM
.pm = &samsung_keypad_pm_ops,
-#endif
},
.id_table = samsung_keypad_driver_ids,
};
-
-static int __init samsung_keypad_init(void)
-{
- return platform_driver_register(&samsung_keypad_driver);
-}
-module_init(samsung_keypad_init);
-
-static void __exit samsung_keypad_exit(void)
-{
- platform_driver_unregister(&samsung_keypad_driver);
-}
-module_exit(samsung_keypad_exit);
+module_platform_driver(samsung_keypad_driver);
MODULE_DESCRIPTION("Samsung keypad driver");
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-keypad");
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 934aeb583b3..da54ad5db15 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -337,19 +337,7 @@ static struct platform_driver sh_keysc_device_driver = {
.pm = &sh_keysc_dev_pm_ops,
}
};
-
-static int __init sh_keysc_init(void)
-{
- return platform_driver_register(&sh_keysc_device_driver);
-}
-
-static void __exit sh_keysc_exit(void)
-{
- platform_driver_unregister(&sh_keysc_device_driver);
-}
-
-module_init(sh_keysc_init);
-module_exit(sh_keysc_exit);
+module_platform_driver(sh_keysc_device_driver);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index d712dffd215..c88bd63dc9c 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -326,18 +326,7 @@ static struct platform_driver spear_kbd_driver = {
#endif
},
};
-
-static int __init spear_kbd_init(void)
-{
- return platform_driver_register(&spear_kbd_driver);
-}
-module_init(spear_kbd_init);
-
-static void __exit spear_kbd_exit(void)
-{
- platform_driver_unregister(&spear_kbd_driver);
-}
-module_exit(spear_kbd_exit);
+module_platform_driver(spear_kbd_driver);
MODULE_AUTHOR("Rajeev Kumar");
MODULE_DESCRIPTION("SPEAr Keyboard Driver");
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index ab7610ca10e..9397cf9c625 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -368,18 +368,7 @@ static struct platform_driver stmpe_keypad_driver = {
.probe = stmpe_keypad_probe,
.remove = __devexit_p(stmpe_keypad_remove),
};
-
-static int __init stmpe_keypad_init(void)
-{
- return platform_driver_register(&stmpe_keypad_driver);
-}
-module_init(stmpe_keypad_init);
-
-static void __exit stmpe_keypad_exit(void)
-{
- platform_driver_unregister(&stmpe_keypad_driver);
-}
-module_exit(stmpe_keypad_exit);
+module_platform_driver(stmpe_keypad_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPExxxx keypad driver");
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index f60c9e82f20..2dee3e4e7c6 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -74,11 +74,13 @@
/**
* struct tc_keypad - data structure used by keypad driver
+ * @tc3589x: pointer to tc35893
* @input: pointer to input device object
* @board: keypad platform device
* @krow: number of rows
* @kcol: number of coloumns
* @keymap: matrix scan code table for keycodes
+ * @keypad_stopped: holds keypad status
*/
struct tc_keypad {
struct tc3589x *tc3589x;
@@ -453,18 +455,7 @@ static struct platform_driver tc3589x_keypad_driver = {
.probe = tc3589x_keypad_probe,
.remove = __devexit_p(tc3589x_keypad_remove),
};
-
-static int __init tc3589x_keypad_init(void)
-{
- return platform_driver_register(&tc3589x_keypad_driver);
-}
-module_init(tc3589x_keypad_init);
-
-static void __exit tc3589x_keypad_exit(void)
-{
- return platform_driver_unregister(&tc3589x_keypad_driver);
-}
-module_exit(tc3589x_keypad_exit);
+module_platform_driver(tc3589x_keypad_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
new file mode 100644
index 00000000000..958ec107bfb
--- /dev/null
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -0,0 +1,430 @@
+/*
+ * Driver for TCA8418 I2C keyboard
+ *
+ * Copyright (C) 2011 Fuel7, Inc. All rights reserved.
+ *
+ * Author: Kyle Manna <kyle.manna@fuel7.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * If you can't comply with GPLv2, alternative licensing terms may be
+ * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
+ * alternative licensing inquiries.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/tca8418_keypad.h>
+
+/* TCA8418 hardware limits */
+#define TCA8418_MAX_ROWS 8
+#define TCA8418_MAX_COLS 10
+
+/* TCA8418 register offsets */
+#define REG_CFG 0x01
+#define REG_INT_STAT 0x02
+#define REG_KEY_LCK_EC 0x03
+#define REG_KEY_EVENT_A 0x04
+#define REG_KEY_EVENT_B 0x05
+#define REG_KEY_EVENT_C 0x06
+#define REG_KEY_EVENT_D 0x07
+#define REG_KEY_EVENT_E 0x08
+#define REG_KEY_EVENT_F 0x09
+#define REG_KEY_EVENT_G 0x0A
+#define REG_KEY_EVENT_H 0x0B
+#define REG_KEY_EVENT_I 0x0C
+#define REG_KEY_EVENT_J 0x0D
+#define REG_KP_LCK_TIMER 0x0E
+#define REG_UNLOCK1 0x0F
+#define REG_UNLOCK2 0x10
+#define REG_GPIO_INT_STAT1 0x11
+#define REG_GPIO_INT_STAT2 0x12
+#define REG_GPIO_INT_STAT3 0x13
+#define REG_GPIO_DAT_STAT1 0x14
+#define REG_GPIO_DAT_STAT2 0x15
+#define REG_GPIO_DAT_STAT3 0x16
+#define REG_GPIO_DAT_OUT1 0x17
+#define REG_GPIO_DAT_OUT2 0x18
+#define REG_GPIO_DAT_OUT3 0x19
+#define REG_GPIO_INT_EN1 0x1A
+#define REG_GPIO_INT_EN2 0x1B
+#define REG_GPIO_INT_EN3 0x1C
+#define REG_KP_GPIO1 0x1D
+#define REG_KP_GPIO2 0x1E
+#define REG_KP_GPIO3 0x1F
+#define REG_GPI_EM1 0x20
+#define REG_GPI_EM2 0x21
+#define REG_GPI_EM3 0x22
+#define REG_GPIO_DIR1 0x23
+#define REG_GPIO_DIR2 0x24
+#define REG_GPIO_DIR3 0x25
+#define REG_GPIO_INT_LVL1 0x26
+#define REG_GPIO_INT_LVL2 0x27
+#define REG_GPIO_INT_LVL3 0x28
+#define REG_DEBOUNCE_DIS1 0x29
+#define REG_DEBOUNCE_DIS2 0x2A
+#define REG_DEBOUNCE_DIS3 0x2B
+#define REG_GPIO_PULL1 0x2C
+#define REG_GPIO_PULL2 0x2D
+#define REG_GPIO_PULL3 0x2E
+
+/* TCA8418 bit definitions */
+#define CFG_AI BIT(7)
+#define CFG_GPI_E_CFG BIT(6)
+#define CFG_OVR_FLOW_M BIT(5)
+#define CFG_INT_CFG BIT(4)
+#define CFG_OVR_FLOW_IEN BIT(3)
+#define CFG_K_LCK_IEN BIT(2)
+#define CFG_GPI_IEN BIT(1)
+#define CFG_KE_IEN BIT(0)
+
+#define INT_STAT_CAD_INT BIT(4)
+#define INT_STAT_OVR_FLOW_INT BIT(3)
+#define INT_STAT_K_LCK_INT BIT(2)
+#define INT_STAT_GPI_INT BIT(1)
+#define INT_STAT_K_INT BIT(0)
+
+/* TCA8418 register masks */
+#define KEY_LCK_EC_KEC 0x7
+#define KEY_EVENT_CODE 0x7f
+#define KEY_EVENT_VALUE 0x80
+
+
+static const struct i2c_device_id tca8418_id[] = {
+ { TCA8418_NAME, 8418, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tca8418_id);
+
+struct tca8418_keypad {
+ unsigned int rows;
+ unsigned int cols;
+ unsigned int keypad_mask; /* Mask for keypad col/rol regs */
+ unsigned int irq;
+ unsigned int row_shift;
+
+ struct i2c_client *client;
+ struct input_dev *input;
+
+ /* Flexible array member, must be at end of struct */
+ unsigned short keymap[];
+};
+
+/*
+ * Write a byte to the TCA8418
+ */
+static int tca8418_write_byte(struct tca8418_keypad *keypad_data,
+ int reg, u8 val)
+{
+ int error;
+
+ error = i2c_smbus_write_byte_data(keypad_data->client, reg, val);
+ if (error < 0) {
+ dev_err(&keypad_data->client->dev,
+ "%s failed, reg: %d, val: %d, error: %d\n",
+ __func__, reg, val, error);
+ return error;
+ }
+
+ return 0;
+}
+
+/*
+ * Read a byte from the TCA8418
+ */
+static int tca8418_read_byte(struct tca8418_keypad *keypad_data,
+ int reg, u8 *val)
+{
+ int error;
+
+ error = i2c_smbus_read_byte_data(keypad_data->client, reg);
+ if (error < 0) {
+ dev_err(&keypad_data->client->dev,
+ "%s failed, reg: %d, error: %d\n",
+ __func__, reg, error);
+ return error;
+ }
+
+ *val = (u8)error;
+
+ return 0;
+}
+
+static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
+{
+ int error, col, row;
+ u8 reg, state, code;
+
+ /* Initial read of the key event FIFO */
+ error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
+
+ /* Assume that key code 0 signifies empty FIFO */
+ while (error >= 0 && reg > 0) {
+ state = reg & KEY_EVENT_VALUE;
+ code = reg & KEY_EVENT_CODE;
+
+ row = code / TCA8418_MAX_COLS;
+ col = code % TCA8418_MAX_COLS;
+
+ row = (col) ? row : row - 1;
+ col = (col) ? col - 1 : TCA8418_MAX_COLS - 1;
+
+ code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
+ input_event(keypad_data->input, EV_MSC, MSC_SCAN, code);
+ input_report_key(keypad_data->input,
+ keypad_data->keymap[code], state);
+
+ /* Read for next loop */
+ error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
+ }
+
+ if (error < 0)
+ dev_err(&keypad_data->client->dev,
+ "unable to read REG_KEY_EVENT_A\n");
+
+ input_sync(keypad_data->input);
+}
+
+/*
+ * Threaded IRQ handler and this can (and will) sleep.
+ */
+static irqreturn_t tca8418_irq_handler(int irq, void *dev_id)
+{
+ struct tca8418_keypad *keypad_data = dev_id;
+ u8 reg;
+ int error;
+
+ error = tca8418_read_byte(keypad_data, REG_INT_STAT, &reg);
+ if (error) {
+ dev_err(&keypad_data->client->dev,
+ "unable to read REG_INT_STAT\n");
+ goto exit;
+ }
+
+ if (reg & INT_STAT_OVR_FLOW_INT)
+ dev_warn(&keypad_data->client->dev, "overflow occurred\n");
+
+ if (reg & INT_STAT_K_INT)
+ tca8418_read_keypad(keypad_data);
+
+exit:
+ /* Clear all interrupts, even IRQs we didn't check (GPI, CAD, LCK) */
+ reg = 0xff;
+ error = tca8418_write_byte(keypad_data, REG_INT_STAT, reg);
+ if (error)
+ dev_err(&keypad_data->client->dev,
+ "unable to clear REG_INT_STAT\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Configure the TCA8418 for keypad operation
+ */
+static int __devinit tca8418_configure(struct tca8418_keypad *keypad_data)
+{
+ int reg, error;
+
+ /* Write config register, if this fails assume device not present */
+ error = tca8418_write_byte(keypad_data, REG_CFG,
+ CFG_INT_CFG | CFG_OVR_FLOW_IEN | CFG_KE_IEN);
+ if (error < 0)
+ return -ENODEV;
+
+
+ /* Assemble a mask for row and column registers */
+ reg = ~(~0 << keypad_data->rows);
+ reg += (~(~0 << keypad_data->cols)) << 8;
+ keypad_data->keypad_mask = reg;
+
+ /* Set registers to keypad mode */
+ error |= tca8418_write_byte(keypad_data, REG_KP_GPIO1, reg);
+ error |= tca8418_write_byte(keypad_data, REG_KP_GPIO2, reg >> 8);
+ error |= tca8418_write_byte(keypad_data, REG_KP_GPIO3, reg >> 16);
+
+ /* Enable column debouncing */
+ error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS1, reg);
+ error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS2, reg >> 8);
+ error |= tca8418_write_byte(keypad_data, REG_DEBOUNCE_DIS3, reg >> 16);
+
+ return error;
+}
+
+static int __devinit tca8418_keypad_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct tca8418_keypad_platform_data *pdata =
+ client->dev.platform_data;
+ struct tca8418_keypad *keypad_data;
+ struct input_dev *input;
+ int error, row_shift, max_keys;
+
+ /* Copy the platform data */
+ if (!pdata) {
+ dev_dbg(&client->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ if (!pdata->keymap_data) {
+ dev_err(&client->dev, "no keymap data defined\n");
+ return -EINVAL;
+ }
+
+ if (!pdata->rows || pdata->rows > TCA8418_MAX_ROWS) {
+ dev_err(&client->dev, "invalid rows\n");
+ return -EINVAL;
+ }
+
+ if (!pdata->cols || pdata->cols > TCA8418_MAX_COLS) {
+ dev_err(&client->dev, "invalid columns\n");
+ return -EINVAL;
+ }
+
+ /* Check i2c driver capabilities */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE)) {
+ dev_err(&client->dev, "%s adapter not supported\n",
+ dev_driver_string(&client->adapter->dev));
+ return -ENODEV;
+ }
+
+ row_shift = get_count_order(pdata->cols);
+ max_keys = pdata->rows << row_shift;
+
+ /* Allocate memory for keypad_data, keymap and input device */
+ keypad_data = kzalloc(sizeof(*keypad_data) +
+ max_keys * sizeof(keypad_data->keymap[0]), GFP_KERNEL);
+ if (!keypad_data)
+ return -ENOMEM;
+
+ keypad_data->rows = pdata->rows;
+ keypad_data->cols = pdata->cols;
+ keypad_data->client = client;
+ keypad_data->row_shift = row_shift;
+
+ /* Initialize the chip or fail if chip isn't present */
+ error = tca8418_configure(keypad_data);
+ if (error < 0)
+ goto fail1;
+
+ /* Configure input device */
+ input = input_allocate_device();
+ if (!input) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+ keypad_data->input = input;
+
+ input->name = client->name;
+ input->dev.parent = &client->dev;
+
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x001;
+ input->id.version = 0x0001;
+
+ input->keycode = keypad_data->keymap;
+ input->keycodesize = sizeof(keypad_data->keymap[0]);
+ input->keycodemax = max_keys;
+
+ __set_bit(EV_KEY, input->evbit);
+ if (pdata->rep)
+ __set_bit(EV_REP, input->evbit);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ input_set_drvdata(input, keypad_data);
+
+ matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
+ input->keycode, input->keybit);
+
+ if (pdata->irq_is_gpio)
+ client->irq = gpio_to_irq(client->irq);
+
+ error = request_threaded_irq(client->irq, NULL, tca8418_irq_handler,
+ IRQF_TRIGGER_FALLING,
+ client->name, keypad_data);
+ if (error) {
+ dev_dbg(&client->dev,
+ "Unable to claim irq %d; error %d\n",
+ client->irq, error);
+ goto fail2;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_dbg(&client->dev,
+ "Unable to register input device, error: %d\n", error);
+ goto fail3;
+ }
+
+ i2c_set_clientdata(client, keypad_data);
+ return 0;
+
+fail3:
+ free_irq(client->irq, keypad_data);
+fail2:
+ input_free_device(input);
+fail1:
+ kfree(keypad_data);
+ return error;
+}
+
+static int __devexit tca8418_keypad_remove(struct i2c_client *client)
+{
+ struct tca8418_keypad *keypad_data = i2c_get_clientdata(client);
+
+ free_irq(keypad_data->client->irq, keypad_data);
+
+ input_unregister_device(keypad_data->input);
+
+ kfree(keypad_data);
+
+ return 0;
+}
+
+
+static struct i2c_driver tca8418_keypad_driver = {
+ .driver = {
+ .name = TCA8418_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = tca8418_keypad_probe,
+ .remove = __devexit_p(tca8418_keypad_remove),
+ .id_table = tca8418_id,
+};
+
+static int __init tca8418_keypad_init(void)
+{
+ return i2c_add_driver(&tca8418_keypad_driver);
+}
+subsys_initcall(tca8418_keypad_init);
+
+static void __exit tca8418_keypad_exit(void)
+{
+ i2c_del_driver(&tca8418_keypad_driver);
+}
+module_exit(tca8418_keypad_exit);
+
+MODULE_AUTHOR("Kyle Manna <kyle.manna@fuel7.com>");
+MODULE_DESCRIPTION("Keypad driver for TCA8418");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index cf3228b0ab9..a136e2e832b 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -26,6 +26,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <mach/clk.h>
@@ -52,6 +53,7 @@
/* KBC Interrupt Register */
#define KBC_INT_0 0x4
#define KBC_INT_FIFO_CNT_INT_STATUS (1 << 2)
+#define KBC_INT_KEYPRESS_INT_STATUS (1 << 0)
#define KBC_ROW_CFG0_0 0x8
#define KBC_COL_CFG0_0 0x18
@@ -74,15 +76,17 @@ struct tegra_kbc {
unsigned int cp_to_wkup_dly;
bool use_fn_map;
bool use_ghost_filter;
+ bool keypress_caused_wake;
const struct tegra_kbc_platform_data *pdata;
unsigned short keycode[KBC_MAX_KEY * 2];
unsigned short current_keys[KBC_MAX_KPENT];
unsigned int num_pressed_keys;
+ u32 wakeup_key;
struct timer_list timer;
struct clk *clk;
};
-static const u32 tegra_kbc_default_keymap[] = {
+static const u32 tegra_kbc_default_keymap[] __devinitdata = {
KEY(0, 2, KEY_W),
KEY(0, 3, KEY_S),
KEY(0, 4, KEY_A),
@@ -217,7 +221,8 @@ static const u32 tegra_kbc_default_keymap[] = {
KEY(31, 4, KEY_HELP),
};
-static const struct matrix_keymap_data tegra_kbc_default_keymap_data = {
+static const
+struct matrix_keymap_data tegra_kbc_default_keymap_data __devinitdata = {
.keymap = tegra_kbc_default_keymap,
.keymap_size = ARRAY_SIZE(tegra_kbc_default_keymap),
};
@@ -409,6 +414,9 @@ static irqreturn_t tegra_kbc_isr(int irq, void *args)
*/
tegra_kbc_set_fifo_interrupt(kbc, false);
mod_timer(&kbc->timer, jiffies + kbc->cp_dly_jiffies);
+ } else if (val & KBC_INT_KEYPRESS_INT_STATUS) {
+ /* We can be here only through system resume path */
+ kbc->keypress_caused_wake = true;
}
spin_unlock_irqrestore(&kbc->lock, flags);
@@ -576,6 +584,56 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
return true;
}
+#ifdef CONFIG_OF
+static struct tegra_kbc_platform_data * __devinit
+tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
+{
+ struct tegra_kbc_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+
+ if (!np)
+ return NULL;
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ if (!of_property_read_u32(np, "debounce-delay", &prop))
+ pdata->debounce_cnt = prop;
+
+ if (!of_property_read_u32(np, "repeat-delay", &prop))
+ pdata->repeat_cnt = prop;
+
+ if (of_find_property(np, "needs-ghost-filter", NULL))
+ pdata->use_ghost_filter = true;
+
+ if (of_find_property(np, "wakeup-source", NULL))
+ pdata->wakeup = true;
+
+ /*
+ * All currently known keymaps with device tree support use the same
+ * pin_cfg, so set it up here.
+ */
+ for (i = 0; i < KBC_MAX_ROW; i++) {
+ pdata->pin_cfg[i].num = i;
+ pdata->pin_cfg[i].is_row = true;
+ }
+
+ for (i = 0; i < KBC_MAX_COL; i++) {
+ pdata->pin_cfg[KBC_MAX_ROW + i].num = i;
+ pdata->pin_cfg[KBC_MAX_ROW + i].is_row = false;
+ }
+
+ return pdata;
+}
+#else
+static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit tegra_kbc_probe(struct platform_device *pdev)
{
const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
@@ -590,21 +648,28 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
unsigned int scan_time_rows;
if (!pdata)
- return -EINVAL;
+ pdata = tegra_kbc_dt_parse_pdata(pdev);
- if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows))
+ if (!pdata)
return -EINVAL;
+ if (!tegra_kbc_check_pin_cfg(pdata, &pdev->dev, &num_rows)) {
+ err = -EINVAL;
+ goto err_free_pdata;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
- return -ENXIO;
+ err = -ENXIO;
+ goto err_free_pdata;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get keyboard IRQ\n");
- return -ENXIO;
+ err = -ENXIO;
+ goto err_free_pdata;
}
kbc = kzalloc(sizeof(*kbc), GFP_KERNEL);
@@ -674,9 +739,10 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
input_dev->keycode, input_dev->keybit);
+ kbc->wakeup_key = pdata->wakeup_key;
- err = request_irq(kbc->irq, tegra_kbc_isr, IRQF_TRIGGER_HIGH,
- pdev->name, kbc);
+ err = request_irq(kbc->irq, tegra_kbc_isr,
+ IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
if (err) {
dev_err(&pdev->dev, "failed to request keyboard IRQ\n");
goto err_put_clk;
@@ -706,6 +772,9 @@ err_free_mem_region:
err_free_mem:
input_free_device(input_dev);
kfree(kbc);
+err_free_pdata:
+ if (!pdev->dev.platform_data)
+ kfree(pdata);
return err;
}
@@ -715,6 +784,8 @@ static int __devexit tegra_kbc_remove(struct platform_device *pdev)
struct tegra_kbc *kbc = platform_get_drvdata(pdev);
struct resource *res;
+ platform_set_drvdata(pdev, NULL);
+
free_irq(kbc->irq, pdev);
clk_put(kbc->clk);
@@ -723,9 +794,14 @@ static int __devexit tegra_kbc_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
- kfree(kbc);
+ /*
+ * If we do not have platform data attached to the device we
+ * allocated it ourselves and thus need to free it.
+ */
+ if (!pdev->dev.platform_data)
+ kfree(kbc->pdata);
- platform_set_drvdata(pdev, NULL);
+ kfree(kbc);
return 0;
}
@@ -754,6 +830,8 @@ static int tegra_kbc_suspend(struct device *dev)
tegra_kbc_setup_wakekeys(kbc, true);
msleep(30);
+ kbc->keypress_caused_wake = false;
+ enable_irq(kbc->irq);
enable_irq_wake(kbc->irq);
} else {
if (kbc->idev->users)
@@ -780,7 +858,19 @@ static int tegra_kbc_resume(struct device *dev)
tegra_kbc_set_fifo_interrupt(kbc, true);
- enable_irq(kbc->irq);
+ if (kbc->keypress_caused_wake && kbc->wakeup_key) {
+ /*
+ * We can't report events directly from the ISR
+ * because timekeeping is stopped when processing
+ * wakeup request and we get a nasty warning when
+ * we try to call do_gettimeofday() in evdev
+ * handler.
+ */
+ input_report_key(kbc->idev, kbc->wakeup_key, 1);
+ input_sync(kbc->idev);
+ input_report_key(kbc->idev, kbc->wakeup_key, 0);
+ input_sync(kbc->idev);
+ }
} else {
if (kbc->idev->users)
err = tegra_kbc_start(kbc);
@@ -793,6 +883,12 @@ static int tegra_kbc_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(tegra_kbc_pm_ops, tegra_kbc_suspend, tegra_kbc_resume);
+static const struct of_device_id tegra_kbc_of_match[] = {
+ { .compatible = "nvidia,tegra20-kbc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_kbc_of_match);
+
static struct platform_driver tegra_kbc_driver = {
.probe = tegra_kbc_probe,
.remove = __devexit_p(tegra_kbc_remove),
@@ -800,20 +896,10 @@ static struct platform_driver tegra_kbc_driver = {
.name = "tegra-kbc",
.owner = THIS_MODULE,
.pm = &tegra_kbc_pm_ops,
+ .of_match_table = tegra_kbc_of_match,
},
};
-
-static void __exit tegra_kbc_exit(void)
-{
- platform_driver_unregister(&tegra_kbc_driver);
-}
-module_exit(tegra_kbc_exit);
-
-static int __init tegra_kbc_init(void)
-{
- return platform_driver_register(&tegra_kbc_driver);
-}
-module_init(tegra_kbc_init);
+module_platform_driver(tegra_kbc_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Rakesh Iyer <riyer@nvidia.com>");
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index 66e55e5cfdd..fb39c94b6fd 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -322,19 +322,7 @@ static struct platform_driver keypad_driver = {
.driver.name = "tnetv107x-keypad",
.driver.owner = THIS_MODULE,
};
-
-static int __init keypad_init(void)
-{
- return platform_driver_register(&keypad_driver);
-}
-
-static void __exit keypad_exit(void)
-{
- platform_driver_unregister(&keypad_driver);
-}
-
-module_init(keypad_init);
-module_exit(keypad_exit);
+module_platform_driver(keypad_driver);
MODULE_AUTHOR("Cyril Chemparathy");
MODULE_DESCRIPTION("TNETV107X Keypad Driver");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index a26922cf0e8..a588578037e 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -460,18 +460,7 @@ static struct platform_driver twl4030_kp_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init twl4030_kp_init(void)
-{
- return platform_driver_register(&twl4030_kp_driver);
-}
-module_init(twl4030_kp_init);
-
-static void __exit twl4030_kp_exit(void)
-{
- platform_driver_unregister(&twl4030_kp_driver);
-}
-module_exit(twl4030_kp_exit);
+module_platform_driver(twl4030_kp_driver);
MODULE_AUTHOR("Texas Instruments");
MODULE_DESCRIPTION("TWL4030 Keypad Driver");
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 318586dadac..99bbb7e775a 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -262,19 +262,7 @@ static struct platform_driver w90p910_keypad_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init w90p910_keypad_init(void)
-{
- return platform_driver_register(&w90p910_keypad_driver);
-}
-
-static void __exit w90p910_keypad_exit(void)
-{
- platform_driver_unregister(&w90p910_keypad_driver);
-}
-
-module_init(w90p910_keypad_init);
-module_exit(w90p910_keypad_exit);
+module_platform_driver(w90p910_keypad_driver);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 keypad driver");
diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c
index 3dca3c14510..f2e0cbc5ab6 100644
--- a/drivers/input/misc/88pm860x_onkey.c
+++ b/drivers/input/misc/88pm860x_onkey.c
@@ -137,18 +137,7 @@ static struct platform_driver pm860x_onkey_driver = {
.probe = pm860x_onkey_probe,
.remove = __devexit_p(pm860x_onkey_remove),
};
-
-static int __init pm860x_onkey_init(void)
-{
- return platform_driver_register(&pm860x_onkey_driver);
-}
-module_init(pm860x_onkey_init);
-
-static void __exit pm860x_onkey_exit(void)
-{
- platform_driver_unregister(&pm860x_onkey_driver);
-}
-module_exit(pm860x_onkey_exit);
+module_platform_driver(pm860x_onkey_driver);
MODULE_DESCRIPTION("Marvell 88PM860x ONKEY driver");
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 22d875fde53..7b46781c30c 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -179,6 +179,31 @@ config INPUT_APANEL
To compile this driver as a module, choose M here: the module will
be called apanel.
+config INPUT_GP2A
+ tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
+ depends on I2C
+ depends on GENERIC_GPIO
+ help
+ Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
+ hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gp2ap002a00f.
+
+config INPUT_GPIO_TILT_POLLED
+ tristate "Polled GPIO tilt switch"
+ depends on GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ This driver implements support for tilt switches connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ The list of gpios to use and the mapping of their states
+ to specific angles is done via platform data.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_tilt_polled.
+
config INPUT_IXP4XX_BEEPER
tristate "IXP4XX Beeper support"
depends on ARCH_IXP4XX
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a244fc6a781..46671a875b9 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -22,6 +22,8 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
+obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
+obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c
index 3d3288a78fd..79d90163363 100644
--- a/drivers/input/misc/ab8500-ponkey.c
+++ b/drivers/input/misc/ab8500-ponkey.c
@@ -139,18 +139,7 @@ static struct platform_driver ab8500_ponkey_driver = {
.probe = ab8500_ponkey_probe,
.remove = __devexit_p(ab8500_ponkey_remove),
};
-
-static int __init ab8500_ponkey_init(void)
-{
- return platform_driver_register(&ab8500_ponkey_driver);
-}
-module_init(ab8500_ponkey_init);
-
-static void __exit ab8500_ponkey_exit(void)
-{
- platform_driver_unregister(&ab8500_ponkey_driver);
-}
-module_exit(ab8500_ponkey_exit);
+module_platform_driver(ab8500_ponkey_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c
index f29de22fdda..34d401efd4a 100644
--- a/drivers/input/misc/adxl34x-spi.c
+++ b/drivers/input/misc/adxl34x-spi.c
@@ -122,7 +122,6 @@ static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend,
static struct spi_driver adxl34x_driver = {
.driver = {
.name = "adxl34x",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.pm = &adxl34x_spi_pm,
},
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index 09244804fb9..1cf72fe513e 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -452,10 +452,10 @@ static ssize_t adxl34x_disable_store(struct device *dev,
const char *buf, size_t count)
{
struct adxl34x *ac = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -541,10 +541,10 @@ static ssize_t adxl34x_rate_store(struct device *dev,
const char *buf, size_t count)
{
struct adxl34x *ac = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned char val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtou8(buf, 10, &val);
if (error)
return error;
@@ -576,10 +576,10 @@ static ssize_t adxl34x_autosleep_store(struct device *dev,
const char *buf, size_t count)
{
struct adxl34x *ac = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -623,13 +623,13 @@ static ssize_t adxl34x_write_store(struct device *dev,
const char *buf, size_t count)
{
struct adxl34x *ac = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
/*
* This allows basic ADXL register write access for debug purposes.
*/
- error = strict_strtoul(buf, 16, &val);
+ error = kstrtouint(buf, 16, &val);
if (error)
return error;
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index 874a51c2fbb..f63341f20b9 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -42,13 +42,13 @@ static int ati_remote2_set_mask(const char *val,
const struct kernel_param *kp,
unsigned int max)
{
- unsigned long mask;
+ unsigned int mask;
int ret;
if (!val)
return -EINVAL;
- ret = strict_strtoul(val, 0, &mask);
+ ret = kstrtouint(val, 0, &mask);
if (ret)
return ret;
@@ -720,11 +720,12 @@ static ssize_t ati_remote2_store_channel_mask(struct device *dev,
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
- unsigned long mask;
+ unsigned int mask;
int r;
- if (strict_strtoul(buf, 0, &mask))
- return -EINVAL;
+ r = kstrtouint(buf, 0, &mask);
+ if (r)
+ return r;
if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
return -EINVAL;
@@ -769,10 +770,12 @@ static ssize_t ati_remote2_store_mode_mask(struct device *dev,
struct usb_device *udev = to_usb_device(dev);
struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
struct ati_remote2 *ar2 = usb_get_intfdata(intf);
- unsigned long mask;
+ unsigned int mask;
+ int err;
- if (strict_strtoul(buf, 0, &mask))
- return -EINVAL;
+ err = kstrtouint(buf, 0, &mask);
+ if (err)
+ return err;
if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
return -EINVAL;
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
index d00edc9f39d..1c4146fccfd 100644
--- a/drivers/input/misc/bfin_rotary.c
+++ b/drivers/input/misc/bfin_rotary.c
@@ -264,18 +264,7 @@ static struct platform_driver bfin_rotary_device_driver = {
#endif
},
};
-
-static int __init bfin_rotary_init(void)
-{
- return platform_driver_register(&bfin_rotary_device_driver);
-}
-module_init(bfin_rotary_init);
-
-static void __exit bfin_rotary_exit(void)
-{
- platform_driver_unregister(&bfin_rotary_device_driver);
-}
-module_exit(bfin_rotary_exit);
+module_platform_driver(bfin_rotary_device_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index fd8407a2963..53e43d29514 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -163,16 +163,4 @@ static struct platform_driver cobalt_buttons_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init cobalt_buttons_init(void)
-{
- return platform_driver_register(&cobalt_buttons_driver);
-}
-
-static void __exit cobalt_buttons_exit(void)
-{
- platform_driver_unregister(&cobalt_buttons_driver);
-}
-
-module_init(cobalt_buttons_init);
-module_exit(cobalt_buttons_exit);
+module_platform_driver(cobalt_buttons_driver);
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index 7283dd2a1ad..35083c6836c 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -267,17 +267,6 @@ static struct platform_driver dm355evm_keys_driver = {
.name = "dm355evm_keys",
},
};
-
-static int __init dm355evm_keys_init(void)
-{
- return platform_driver_register(&dm355evm_keys_driver);
-}
-module_init(dm355evm_keys_init);
-
-static void __exit dm355evm_keys_exit(void)
-{
- platform_driver_unregister(&dm355evm_keys_driver);
-}
-module_exit(dm355evm_keys_exit);
+module_platform_driver(dm355evm_keys_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
new file mode 100644
index 00000000000..71fba8c2fc6
--- /dev/null
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -0,0 +1,299 @@
+/*
+ * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
+ *
+ * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
+ * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/input/gp2ap002a00f.h>
+
+struct gp2a_data {
+ struct input_dev *input;
+ const struct gp2a_platform_data *pdata;
+ struct i2c_client *i2c_client;
+};
+
+enum gp2a_addr {
+ GP2A_ADDR_PROX = 0x0,
+ GP2A_ADDR_GAIN = 0x1,
+ GP2A_ADDR_HYS = 0x2,
+ GP2A_ADDR_CYCLE = 0x3,
+ GP2A_ADDR_OPMOD = 0x4,
+ GP2A_ADDR_CON = 0x6
+};
+
+enum gp2a_controls {
+ /* Software Shutdown control: 0 = shutdown, 1 = normal operation */
+ GP2A_CTRL_SSD = 0x01
+};
+
+static int gp2a_report(struct gp2a_data *dt)
+{
+ int vo = gpio_get_value(dt->pdata->vout_gpio);
+
+ input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo);
+ input_sync(dt->input);
+
+ return 0;
+}
+
+static irqreturn_t gp2a_irq(int irq, void *handle)
+{
+ struct gp2a_data *dt = handle;
+
+ gp2a_report(dt);
+
+ return IRQ_HANDLED;
+}
+
+static int gp2a_enable(struct gp2a_data *dt)
+{
+ return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
+ GP2A_CTRL_SSD);
+}
+
+static int gp2a_disable(struct gp2a_data *dt)
+{
+ return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
+ 0x00);
+}
+
+static int gp2a_device_open(struct input_dev *dev)
+{
+ struct gp2a_data *dt = input_get_drvdata(dev);
+ int error;
+
+ error = gp2a_enable(dt);
+ if (error < 0) {
+ dev_err(&dt->i2c_client->dev,
+ "unable to activate, err %d\n", error);
+ return error;
+ }
+
+ gp2a_report(dt);
+
+ return 0;
+}
+
+static void gp2a_device_close(struct input_dev *dev)
+{
+ struct gp2a_data *dt = input_get_drvdata(dev);
+ int error;
+
+ error = gp2a_disable(dt);
+ if (error < 0)
+ dev_err(&dt->i2c_client->dev,
+ "unable to deactivate, err %d\n", error);
+}
+
+static int __devinit gp2a_initialize(struct gp2a_data *dt)
+{
+ int error;
+
+ error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
+ 0x08);
+ if (error < 0)
+ return error;
+
+ error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
+ 0xc2);
+ if (error < 0)
+ return error;
+
+ error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
+ 0x04);
+ if (error < 0)
+ return error;
+
+ error = gp2a_disable(dt);
+
+ return error;
+}
+
+static int __devinit gp2a_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct gp2a_platform_data *pdata = client->dev.platform_data;
+ struct gp2a_data *dt;
+ int error;
+
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->hw_setup) {
+ error = pdata->hw_setup(client);
+ if (error < 0)
+ return error;
+ }
+
+ error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME);
+ if (error)
+ goto err_hw_shutdown;
+
+ dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
+ if (!dt) {
+ error = -ENOMEM;
+ goto err_free_gpio;
+ }
+
+ dt->pdata = pdata;
+ dt->i2c_client = client;
+
+ error = gp2a_initialize(dt);
+ if (error < 0)
+ goto err_free_mem;
+
+ dt->input = input_allocate_device();
+ if (!dt->input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ input_set_drvdata(dt->input, dt);
+
+ dt->input->open = gp2a_device_open;
+ dt->input->close = gp2a_device_close;
+ dt->input->name = GP2A_I2C_NAME;
+ dt->input->id.bustype = BUS_I2C;
+ dt->input->dev.parent = &client->dev;
+
+ input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY);
+
+ error = request_threaded_irq(client->irq, NULL, gp2a_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ GP2A_I2C_NAME, dt);
+ if (error) {
+ dev_err(&client->dev, "irq request failed\n");
+ goto err_free_input_dev;
+ }
+
+ error = input_register_device(dt->input);
+ if (error) {
+ dev_err(&client->dev, "device registration failed\n");
+ goto err_free_irq;
+ }
+
+ device_init_wakeup(&client->dev, pdata->wakeup);
+ i2c_set_clientdata(client, dt);
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, dt);
+err_free_input_dev:
+ input_free_device(dt->input);
+err_free_mem:
+ kfree(dt);
+err_free_gpio:
+ gpio_free(pdata->vout_gpio);
+err_hw_shutdown:
+ if (pdata->hw_shutdown)
+ pdata->hw_shutdown(client);
+ return error;
+}
+
+static int __devexit gp2a_remove(struct i2c_client *client)
+{
+ struct gp2a_data *dt = i2c_get_clientdata(client);
+ const struct gp2a_platform_data *pdata = dt->pdata;
+
+ device_init_wakeup(&client->dev, false);
+
+ free_irq(client->irq, dt);
+
+ input_unregister_device(dt->input);
+ kfree(dt);
+
+ gpio_free(pdata->vout_gpio);
+
+ if (pdata->hw_shutdown)
+ pdata->hw_shutdown(client);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gp2a_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gp2a_data *dt = i2c_get_clientdata(client);
+ int retval = 0;
+
+ if (device_may_wakeup(&client->dev)) {
+ enable_irq_wake(client->irq);
+ } else {
+ mutex_lock(&dt->input->mutex);
+ if (dt->input->users)
+ retval = gp2a_disable(dt);
+ mutex_unlock(&dt->input->mutex);
+ }
+
+ return retval;
+}
+
+static int gp2a_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct gp2a_data *dt = i2c_get_clientdata(client);
+ int retval = 0;
+
+ if (device_may_wakeup(&client->dev)) {
+ disable_irq_wake(client->irq);
+ } else {
+ mutex_lock(&dt->input->mutex);
+ if (dt->input->users)
+ retval = gp2a_enable(dt);
+ mutex_unlock(&dt->input->mutex);
+ }
+
+ return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
+
+static const struct i2c_device_id gp2a_i2c_id[] = {
+ { GP2A_I2C_NAME, 0 },
+ { }
+};
+
+static struct i2c_driver gp2a_i2c_driver = {
+ .driver = {
+ .name = GP2A_I2C_NAME,
+ .owner = THIS_MODULE,
+ .pm = &gp2a_pm,
+ },
+ .probe = gp2a_probe,
+ .remove = __devexit_p(gp2a_remove),
+ .id_table = gp2a_i2c_id,
+};
+
+static int __init gp2a_init(void)
+{
+ return i2c_add_driver(&gp2a_i2c_driver);
+}
+
+static void __exit gp2a_exit(void)
+{
+ i2c_del_driver(&gp2a_i2c_driver);
+}
+
+module_init(gp2a_init);
+module_exit(gp2a_exit);
+
+MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
+MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
new file mode 100644
index 00000000000..277a0574c19
--- /dev/null
+++ b/drivers/input/misc/gpio_tilt_polled.c
@@ -0,0 +1,213 @@
+/*
+ * Driver for tilt switches connected via GPIO lines
+ * not capable of generating interrupts
+ *
+ * Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on: drivers/input/keyboard/gpio_keys_polled.c
+ *
+ * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input/gpio_tilt.h>
+
+#define DRV_NAME "gpio-tilt-polled"
+
+struct gpio_tilt_polled_dev {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ const struct gpio_tilt_platform_data *pdata;
+
+ int last_state;
+
+ int threshold;
+ int count;
+};
+
+static void gpio_tilt_polled_poll(struct input_polled_dev *dev)
+{
+ struct gpio_tilt_polled_dev *tdev = dev->private;
+ const struct gpio_tilt_platform_data *pdata = tdev->pdata;
+ struct input_dev *input = dev->input;
+ struct gpio_tilt_state *tilt_state = NULL;
+ int state, i;
+
+ if (tdev->count < tdev->threshold) {
+ tdev->count++;
+ } else {
+ state = 0;
+ for (i = 0; i < pdata->nr_gpios; i++)
+ state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i);
+
+ if (state != tdev->last_state) {
+ for (i = 0; i < pdata->nr_states; i++)
+ if (pdata->states[i].gpios == state)
+ tilt_state = &pdata->states[i];
+
+ if (tilt_state) {
+ for (i = 0; i < pdata->nr_axes; i++)
+ input_report_abs(input,
+ pdata->axes[i].axis,
+ tilt_state->axes[i]);
+
+ input_sync(input);
+ }
+
+ tdev->count = 0;
+ tdev->last_state = state;
+ }
+ }
+}
+
+static void gpio_tilt_polled_open(struct input_polled_dev *dev)
+{
+ struct gpio_tilt_polled_dev *tdev = dev->private;
+ const struct gpio_tilt_platform_data *pdata = tdev->pdata;
+
+ if (pdata->enable)
+ pdata->enable(tdev->dev);
+
+ /* report initial state of the axes */
+ tdev->last_state = -1;
+ tdev->count = tdev->threshold;
+ gpio_tilt_polled_poll(tdev->poll_dev);
+}
+
+static void gpio_tilt_polled_close(struct input_polled_dev *dev)
+{
+ struct gpio_tilt_polled_dev *tdev = dev->private;
+ const struct gpio_tilt_platform_data *pdata = tdev->pdata;
+
+ if (pdata->disable)
+ pdata->disable(tdev->dev);
+}
+
+static int __devinit gpio_tilt_polled_probe(struct platform_device *pdev)
+{
+ const struct gpio_tilt_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct gpio_tilt_polled_dev *tdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error, i;
+
+ if (!pdata || !pdata->poll_interval)
+ return -EINVAL;
+
+ tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL);
+ if (!tdev) {
+ dev_err(dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ error = gpio_request_array(pdata->gpios, pdata->nr_gpios);
+ if (error) {
+ dev_err(dev,
+ "Could not request tilt GPIOs: %d\n", error);
+ goto err_free_tdev;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ dev_err(dev, "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_gpios;
+ }
+
+ poll_dev->private = tdev;
+ poll_dev->poll = gpio_tilt_polled_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+ poll_dev->open = gpio_tilt_polled_open;
+ poll_dev->close = gpio_tilt_polled_close;
+
+ input = poll_dev->input;
+
+ input->name = pdev->name;
+ input->phys = DRV_NAME"/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ __set_bit(EV_ABS, input->evbit);
+ for (i = 0; i < pdata->nr_axes; i++)
+ input_set_abs_params(input, pdata->axes[i].axis,
+ pdata->axes[i].min, pdata->axes[i].max,
+ pdata->axes[i].fuzz, pdata->axes[i].flat);
+
+ tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval,
+ pdata->poll_interval);
+
+ tdev->poll_dev = poll_dev;
+ tdev->dev = dev;
+ tdev->pdata = pdata;
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ error);
+ goto err_free_polldev;
+ }
+
+ platform_set_drvdata(pdev, tdev);
+
+ return 0;
+
+err_free_polldev:
+ input_free_polled_device(poll_dev);
+err_free_gpios:
+ gpio_free_array(pdata->gpios, pdata->nr_gpios);
+err_free_tdev:
+ kfree(tdev);
+
+ return error;
+}
+
+static int __devexit gpio_tilt_polled_remove(struct platform_device *pdev)
+{
+ struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
+ const struct gpio_tilt_platform_data *pdata = tdev->pdata;
+
+ platform_set_drvdata(pdev, NULL);
+
+ input_unregister_polled_device(tdev->poll_dev);
+ input_free_polled_device(tdev->poll_dev);
+
+ gpio_free_array(pdata->gpios, pdata->nr_gpios);
+
+ kfree(tdev);
+
+ return 0;
+}
+
+static struct platform_driver gpio_tilt_polled_driver = {
+ .probe = gpio_tilt_polled_probe,
+ .remove = __devexit_p(gpio_tilt_polled_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(gpio_tilt_polled_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("Polled GPIO tilt driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 302ab46ce75..50e28306830 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -168,16 +168,5 @@ static struct platform_driver ixp4xx_spkr_platform_driver = {
.remove = __devexit_p(ixp4xx_spkr_remove),
.shutdown = ixp4xx_spkr_shutdown,
};
+module_platform_driver(ixp4xx_spkr_platform_driver);
-static int __init ixp4xx_spkr_init(void)
-{
- return platform_driver_register(&ixp4xx_spkr_platform_driver);
-}
-
-static void __exit ixp4xx_spkr_exit(void)
-{
- platform_driver_unregister(&ixp4xx_spkr_platform_driver);
-}
-
-module_init(ixp4xx_spkr_init);
-module_exit(ixp4xx_spkr_exit);
diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c
index 7de0ded4ccc..23cf0827104 100644
--- a/drivers/input/misc/max8925_onkey.c
+++ b/drivers/input/misc/max8925_onkey.c
@@ -166,18 +166,7 @@ static struct platform_driver max8925_onkey_driver = {
.probe = max8925_onkey_probe,
.remove = __devexit_p(max8925_onkey_remove),
};
-
-static int __init max8925_onkey_init(void)
-{
- return platform_driver_register(&max8925_onkey_driver);
-}
-module_init(max8925_onkey_init);
-
-static void __exit max8925_onkey_exit(void)
-{
- platform_driver_unregister(&max8925_onkey_driver);
-}
-module_exit(max8925_onkey_exit);
+module_platform_driver(max8925_onkey_driver);
MODULE_DESCRIPTION("Maxim MAX8925 ONKEY driver");
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
index 09b05228865..8428f1e8e83 100644
--- a/drivers/input/misc/mc13783-pwrbutton.c
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -255,7 +255,7 @@ static int __devexit mc13783_pwrbutton_remove(struct platform_device *pdev)
return 0;
}
-struct platform_driver mc13783_pwrbutton_driver = {
+static struct platform_driver mc13783_pwrbutton_driver = {
.probe = mc13783_pwrbutton_probe,
.remove = __devexit_p(mc13783_pwrbutton_remove),
.driver = {
@@ -264,17 +264,7 @@ struct platform_driver mc13783_pwrbutton_driver = {
},
};
-static int __init mc13783_pwrbutton_init(void)
-{
- return platform_driver_register(&mc13783_pwrbutton_driver);
-}
-module_init(mc13783_pwrbutton_init);
-
-static void __exit mc13783_pwrbutton_exit(void)
-{
- platform_driver_unregister(&mc13783_pwrbutton_driver);
-}
-module_exit(mc13783_pwrbutton_exit);
+module_platform_driver(mc13783_pwrbutton_driver);
MODULE_ALIAS("platform:mc13783-pwrbutton");
MODULE_DESCRIPTION("MC13783 Power Button");
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index f71dc728da5..208d1a1cc7f 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -41,18 +41,67 @@
#include <linux/slab.h>
#include <linux/pm_runtime.h>
-#define MPU3050_CHIP_ID_REG 0x00
#define MPU3050_CHIP_ID 0x69
-#define MPU3050_XOUT_H 0x1D
-#define MPU3050_PWR_MGM 0x3E
-#define MPU3050_PWR_MGM_POS 6
-#define MPU3050_PWR_MGM_MASK 0x40
#define MPU3050_AUTO_DELAY 1000
#define MPU3050_MIN_VALUE -32768
#define MPU3050_MAX_VALUE 32767
+#define MPU3050_DEFAULT_POLL_INTERVAL 200
+#define MPU3050_DEFAULT_FS_RANGE 3
+
+/* Register map */
+#define MPU3050_CHIP_ID_REG 0x00
+#define MPU3050_SMPLRT_DIV 0x15
+#define MPU3050_DLPF_FS_SYNC 0x16
+#define MPU3050_INT_CFG 0x17
+#define MPU3050_XOUT_H 0x1D
+#define MPU3050_PWR_MGM 0x3E
+#define MPU3050_PWR_MGM_POS 6
+
+/* Register bits */
+
+/* DLPF_FS_SYNC */
+#define MPU3050_EXT_SYNC_NONE 0x00
+#define MPU3050_EXT_SYNC_TEMP 0x20
+#define MPU3050_EXT_SYNC_GYROX 0x40
+#define MPU3050_EXT_SYNC_GYROY 0x60
+#define MPU3050_EXT_SYNC_GYROZ 0x80
+#define MPU3050_EXT_SYNC_ACCELX 0xA0
+#define MPU3050_EXT_SYNC_ACCELY 0xC0
+#define MPU3050_EXT_SYNC_ACCELZ 0xE0
+#define MPU3050_EXT_SYNC_MASK 0xE0
+#define MPU3050_FS_250DPS 0x00
+#define MPU3050_FS_500DPS 0x08
+#define MPU3050_FS_1000DPS 0x10
+#define MPU3050_FS_2000DPS 0x18
+#define MPU3050_FS_MASK 0x18
+#define MPU3050_DLPF_CFG_256HZ_NOLPF2 0x00
+#define MPU3050_DLPF_CFG_188HZ 0x01
+#define MPU3050_DLPF_CFG_98HZ 0x02
+#define MPU3050_DLPF_CFG_42HZ 0x03
+#define MPU3050_DLPF_CFG_20HZ 0x04
+#define MPU3050_DLPF_CFG_10HZ 0x05
+#define MPU3050_DLPF_CFG_5HZ 0x06
+#define MPU3050_DLPF_CFG_2100HZ_NOLPF 0x07
+#define MPU3050_DLPF_CFG_MASK 0x07
+/* INT_CFG */
+#define MPU3050_RAW_RDY_EN 0x01
+#define MPU3050_MPU_RDY_EN 0x02
+#define MPU3050_LATCH_INT_EN 0x04
+/* PWR_MGM */
+#define MPU3050_PWR_MGM_PLL_X 0x01
+#define MPU3050_PWR_MGM_PLL_Y 0x02
+#define MPU3050_PWR_MGM_PLL_Z 0x03
+#define MPU3050_PWR_MGM_CLKSEL 0x07
+#define MPU3050_PWR_MGM_STBY_ZG 0x08
+#define MPU3050_PWR_MGM_STBY_YG 0x10
+#define MPU3050_PWR_MGM_STBY_XG 0x20
+#define MPU3050_PWR_MGM_SLEEP 0x40
+#define MPU3050_PWR_MGM_RESET 0x80
+#define MPU3050_PWR_MGM_MASK 0x40
+
struct axis_data {
s16 x;
s16 y;
@@ -148,9 +197,20 @@ static void mpu3050_set_power_mode(struct i2c_client *client, u8 val)
static int mpu3050_input_open(struct input_dev *input)
{
struct mpu3050_sensor *sensor = input_get_drvdata(input);
+ int error;
pm_runtime_get(sensor->dev);
+ /* Enable interrupts */
+ error = i2c_smbus_write_byte_data(sensor->client, MPU3050_INT_CFG,
+ MPU3050_LATCH_INT_EN |
+ MPU3050_RAW_RDY_EN |
+ MPU3050_MPU_RDY_EN);
+ if (error < 0) {
+ pm_runtime_put(sensor->dev);
+ return error;
+ }
+
return 0;
}
@@ -192,6 +252,51 @@ static irqreturn_t mpu3050_interrupt_thread(int irq, void *data)
}
/**
+ * mpu3050_hw_init - initialize hardware
+ * @sensor: the sensor
+ *
+ * Called during device probe; configures the sampling method.
+ */
+static int __devinit mpu3050_hw_init(struct mpu3050_sensor *sensor)
+{
+ struct i2c_client *client = sensor->client;
+ int ret;
+ u8 reg;
+
+ /* Reset */
+ ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM,
+ MPU3050_PWR_MGM_RESET);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_read_byte_data(client, MPU3050_PWR_MGM);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~MPU3050_PWR_MGM_CLKSEL;
+ ret |= MPU3050_PWR_MGM_PLL_Z;
+ ret = i2c_smbus_write_byte_data(client, MPU3050_PWR_MGM, ret);
+ if (ret < 0)
+ return ret;
+
+ /* Output frequency divider. The poll interval */
+ ret = i2c_smbus_write_byte_data(client, MPU3050_SMPLRT_DIV,
+ MPU3050_DEFAULT_POLL_INTERVAL - 1);
+ if (ret < 0)
+ return ret;
+
+ /* Set low pass filter and full scale */
+ reg = MPU3050_DEFAULT_FS_RANGE;
+ reg |= MPU3050_DLPF_CFG_42HZ << 3;
+ reg |= MPU3050_EXT_SYNC_NONE << 5;
+ ret = i2c_smbus_write_byte_data(client, MPU3050_DLPF_FS_SYNC, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/**
* mpu3050_probe - device detection callback
* @client: i2c client of found device
* @id: id match information
@@ -256,10 +361,14 @@ static int __devinit mpu3050_probe(struct i2c_client *client,
pm_runtime_set_active(&client->dev);
+ error = mpu3050_hw_init(sensor);
+ if (error)
+ goto err_pm_set_suspended;
+
error = request_threaded_irq(client->irq,
NULL, mpu3050_interrupt_thread,
IRQF_TRIGGER_RISING,
- "mpu_int", sensor);
+ "mpu3050", sensor);
if (error) {
dev_err(&client->dev,
"can't get IRQ %d, error %d\n", client->irq, error);
@@ -348,11 +457,18 @@ static const struct i2c_device_id mpu3050_ids[] = {
};
MODULE_DEVICE_TABLE(i2c, mpu3050_ids);
+static const struct of_device_id mpu3050_of_match[] = {
+ { .compatible = "invn,mpu3050", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mpu3050_of_match);
+
static struct i2c_driver mpu3050_i2c_driver = {
.driver = {
.name = "mpu3050",
.owner = THIS_MODULE,
.pm = &mpu3050_pm,
+ .of_match_table = mpu3050_of_match,
},
.probe = mpu3050_probe,
.remove = __devexit_p(mpu3050_remove),
diff --git a/drivers/input/misc/pcap_keys.c b/drivers/input/misc/pcap_keys.c
index 99335c28625..e09b4fe8191 100644
--- a/drivers/input/misc/pcap_keys.c
+++ b/drivers/input/misc/pcap_keys.c
@@ -125,19 +125,7 @@ static struct platform_driver pcap_keys_device_driver = {
.owner = THIS_MODULE,
}
};
-
-static int __init pcap_keys_init(void)
-{
- return platform_driver_register(&pcap_keys_device_driver);
-};
-
-static void __exit pcap_keys_exit(void)
-{
- platform_driver_unregister(&pcap_keys_device_driver);
-};
-
-module_init(pcap_keys_init);
-module_exit(pcap_keys_exit);
+module_platform_driver(pcap_keys_device_driver);
MODULE_DESCRIPTION("Motorola PCAP2 input events driver");
MODULE_AUTHOR("Ilya Petrov <ilya.muromec@gmail.com>");
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 95562735728..53891de80b0 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -113,18 +113,7 @@ static struct platform_driver pcf50633_input_driver = {
.probe = pcf50633_input_probe,
.remove = __devexit_p(pcf50633_input_remove),
};
-
-static int __init pcf50633_input_init(void)
-{
- return platform_driver_register(&pcf50633_input_driver);
-}
-module_init(pcf50633_input_init);
-
-static void __exit pcf50633_input_exit(void)
-{
- platform_driver_unregister(&pcf50633_input_driver);
-}
-module_exit(pcf50633_input_exit);
+module_platform_driver(pcf50633_input_driver);
MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
MODULE_DESCRIPTION("PCF50633 input driver");
diff --git a/drivers/input/misc/pcspkr.c b/drivers/input/misc/pcspkr.c
index 34f4d2e0f50..b2484aa07f3 100644
--- a/drivers/input/misc/pcspkr.c
+++ b/drivers/input/misc/pcspkr.c
@@ -134,17 +134,5 @@ static struct platform_driver pcspkr_platform_driver = {
.remove = __devexit_p(pcspkr_remove),
.shutdown = pcspkr_shutdown,
};
+module_platform_driver(pcspkr_platform_driver);
-
-static int __init pcspkr_init(void)
-{
- return platform_driver_register(&pcspkr_platform_driver);
-}
-
-static void __exit pcspkr_exit(void)
-{
- platform_driver_unregister(&pcspkr_platform_driver);
-}
-
-module_init(pcspkr_init);
-module_exit(pcspkr_exit);
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index 43192930824..dfbfb463ea5 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -277,18 +277,7 @@ static struct platform_driver pm8xxx_vib_driver = {
.pm = &pm8xxx_vib_pm_ops,
},
};
-
-static int __init pm8xxx_vib_init(void)
-{
- return platform_driver_register(&pm8xxx_vib_driver);
-}
-module_init(pm8xxx_vib_init);
-
-static void __exit pm8xxx_vib_exit(void)
-{
- platform_driver_unregister(&pm8xxx_vib_driver);
-}
-module_exit(pm8xxx_vib_exit);
+module_platform_driver(pm8xxx_vib_driver);
MODULE_ALIAS("platform:pm8xxx_vib");
MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework");
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index b3cfb9c71e6..0f83d0f1d01 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -213,18 +213,7 @@ static struct platform_driver pmic8xxx_pwrkey_driver = {
.pm = &pm8xxx_pwr_key_pm_ops,
},
};
-
-static int __init pmic8xxx_pwrkey_init(void)
-{
- return platform_driver_register(&pmic8xxx_pwrkey_driver);
-}
-module_init(pmic8xxx_pwrkey_init);
-
-static void __exit pmic8xxx_pwrkey_exit(void)
-{
- platform_driver_unregister(&pmic8xxx_pwrkey_driver);
-}
-module_exit(pmic8xxx_pwrkey_exit);
+module_platform_driver(pmic8xxx_pwrkey_driver);
MODULE_ALIAS("platform:pmic8xxx_pwrkey");
MODULE_DESCRIPTION("PMIC8XXX Power Key driver");
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index 57c294f0719..fc84c8a5114 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -180,18 +180,7 @@ static struct platform_driver pwm_beeper_driver = {
.pm = PWM_BEEPER_PM_OPS,
},
};
-
-static int __init pwm_beeper_init(void)
-{
- return platform_driver_register(&pwm_beeper_driver);
-}
-module_init(pwm_beeper_init);
-
-static void __exit pwm_beeper_exit(void)
-{
- platform_driver_unregister(&pwm_beeper_driver);
-}
-module_exit(pwm_beeper_exit);
+module_platform_driver(pwm_beeper_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("PWM beeper driver");
diff --git a/drivers/input/misc/rb532_button.c b/drivers/input/misc/rb532_button.c
index e2c7f622a0b..aeb02bcf723 100644
--- a/drivers/input/misc/rb532_button.c
+++ b/drivers/input/misc/rb532_button.c
@@ -100,19 +100,7 @@ static struct platform_driver rb532_button_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init rb532_button_init(void)
-{
- return platform_driver_register(&rb532_button_driver);
-}
-
-static void __exit rb532_button_exit(void)
-{
- platform_driver_unregister(&rb532_button_driver);
-}
-
-module_init(rb532_button_init);
-module_exit(rb532_button_exit);
+module_platform_driver(rb532_button_driver);
MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 2be21694fac..f07f784198b 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -284,19 +284,7 @@ static struct platform_driver rotary_encoder_driver = {
.owner = THIS_MODULE,
}
};
-
-static int __init rotary_encoder_init(void)
-{
- return platform_driver_register(&rotary_encoder_driver);
-}
-
-static void __exit rotary_encoder_exit(void)
-{
- platform_driver_unregister(&rotary_encoder_driver);
-}
-
-module_init(rotary_encoder_init);
-module_exit(rotary_encoder_exit);
+module_platform_driver(rotary_encoder_driver);
MODULE_ALIAS("platform:" DRV_NAME);
MODULE_DESCRIPTION("GPIO rotary encoder driver");
diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c
index 1a80c0dab83..5d9fd557119 100644
--- a/drivers/input/misc/sgi_btns.c
+++ b/drivers/input/misc/sgi_btns.c
@@ -164,17 +164,6 @@ static struct platform_driver sgi_buttons_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init sgi_buttons_init(void)
-{
- return platform_driver_register(&sgi_buttons_driver);
-}
-
-static void __exit sgi_buttons_exit(void)
-{
- platform_driver_unregister(&sgi_buttons_driver);
-}
+module_platform_driver(sgi_buttons_driver);
MODULE_LICENSE("GPL");
-module_init(sgi_buttons_init);
-module_exit(sgi_buttons_exit);
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index 38e4b507b94..19a68828cd8 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -107,25 +107,14 @@ static int __exit twl4030_pwrbutton_remove(struct platform_device *pdev)
}
static struct platform_driver twl4030_pwrbutton_driver = {
+ .probe = twl4030_pwrbutton_probe,
.remove = __exit_p(twl4030_pwrbutton_remove),
.driver = {
.name = "twl4030_pwrbutton",
.owner = THIS_MODULE,
},
};
-
-static int __init twl4030_pwrbutton_init(void)
-{
- return platform_driver_probe(&twl4030_pwrbutton_driver,
- twl4030_pwrbutton_probe);
-}
-module_init(twl4030_pwrbutton_init);
-
-static void __exit twl4030_pwrbutton_exit(void)
-{
- platform_driver_unregister(&twl4030_pwrbutton_driver);
-}
-module_exit(twl4030_pwrbutton_exit);
+module_platform_driver(twl4030_pwrbutton_driver);
MODULE_ALIAS("platform:twl4030_pwrbutton");
MODULE_DESCRIPTION("Triton2 Power Button");
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index 3c1a432c14d..37651373a95 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -278,21 +278,9 @@ static struct platform_driver twl4030_vibra_driver = {
#endif
},
};
-
-static int __init twl4030_vibra_init(void)
-{
- return platform_driver_register(&twl4030_vibra_driver);
-}
-module_init(twl4030_vibra_init);
-
-static void __exit twl4030_vibra_exit(void)
-{
- platform_driver_unregister(&twl4030_vibra_driver);
-}
-module_exit(twl4030_vibra_exit);
+module_platform_driver(twl4030_vibra_driver);
MODULE_ALIAS("platform:twl4030-vibra");
-
MODULE_DESCRIPTION("TWL4030 Vibra driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Nokia Corporation");
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index ad153a417ee..45874fed523 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -410,18 +410,7 @@ static struct platform_driver twl6040_vibra_driver = {
.pm = &twl6040_vibra_pm_ops,
},
};
-
-static int __init twl6040_vibra_init(void)
-{
- return platform_driver_register(&twl6040_vibra_driver);
-}
-module_init(twl6040_vibra_init);
-
-static void __exit twl6040_vibra_exit(void)
-{
- platform_driver_unregister(&twl6040_vibra_driver);
-}
-module_exit(twl6040_vibra_exit);
+module_platform_driver(twl6040_vibra_driver);
MODULE_ALIAS("platform:twl6040-vibra");
MODULE_DESCRIPTION("TWL6040 Vibra driver");
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index c3d7ba5f5b4..47f18d6bce4 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -145,18 +145,7 @@ static struct platform_driver wm831x_on_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init wm831x_on_init(void)
-{
- return platform_driver_register(&wm831x_on_driver);
-}
-module_init(wm831x_on_init);
-
-static void __exit wm831x_on_exit(void)
-{
- platform_driver_unregister(&wm831x_on_driver);
-}
-module_exit(wm831x_on_exit);
+module_platform_driver(wm831x_on_driver);
MODULE_ALIAS("platform:wm831x-on");
MODULE_DESCRIPTION("WM831x ON pin");
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 003587c71f4..bd87380bd87 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -17,13 +17,63 @@
#include <linux/slab.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include "psmouse.h"
#include "alps.h"
-#define ALPS_OLDPROTO 0x01 /* old style input */
+/*
+ * Definitions for ALPS version 3 and 4 command mode protocol
+ */
+#define ALPS_V3_X_MAX 2000
+#define ALPS_V3_Y_MAX 1400
+
+#define ALPS_BITMAP_X_BITS 15
+#define ALPS_BITMAP_Y_BITS 11
+
+#define ALPS_CMD_NIBBLE_10 0x01f2
+
+static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
+ { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */
+ { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
+ { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
+ { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
+ { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
+ { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
+ { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
+ { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
+ { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
+ { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
+ { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
+ { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
+ { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
+ { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
+ { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
+ { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
+};
+
+static const struct alps_nibble_commands alps_v4_nibble_commands[] = {
+ { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */
+ { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */
+ { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */
+ { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */
+ { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */
+ { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */
+ { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */
+ { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */
+ { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */
+ { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */
+ { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */
+ { PSMOUSE_CMD_SETRES, 0x00 }, /* b */
+ { PSMOUSE_CMD_SETRES, 0x01 }, /* c */
+ { PSMOUSE_CMD_SETRES, 0x02 }, /* d */
+ { PSMOUSE_CMD_SETRES, 0x03 }, /* e */
+ { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */
+};
+
+
#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
#define ALPS_PASS 0x04 /* device has a pass-through port */
@@ -35,30 +85,33 @@
6-byte ALPS packet */
static const struct alps_model_info alps_model_data[] = {
- { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
- { { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
- { { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
- { { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
- { { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 }, /* HP ze1115 */
- { { 0x63, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
- { { 0x63, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
- { { 0x63, 0x02, 0x28 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */
- { { 0x63, 0x02, 0x3c }, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */
- { { 0x63, 0x02, 0x50 }, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */
- { { 0x63, 0x02, 0x64 }, 0xf8, 0xf8, 0 },
- { { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
- { { 0x73, 0x00, 0x0a }, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */
- { { 0x73, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
- { { 0x73, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */
- { { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
- { { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
- { { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
+ { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
+ { { 0x33, 0x02, 0x0a }, 0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 }, /* UMAX-530T */
+ { { 0x53, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x53, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, /* HP ze1115 */
+ { { 0x63, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x63, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x63, 0x02, 0x28 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */
+ { { 0x63, 0x02, 0x3c }, 0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */
+ { { 0x63, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */
+ { { 0x63, 0x02, 0x64 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
+ { { 0x73, 0x00, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */
+ { { 0x73, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+ { { 0x73, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */
+ { { 0x20, 0x02, 0x0e }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
+ { { 0x22, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
+ { { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
- { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
+ { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
- { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
- { { 0x52, 0x01, 0x14 }, 0xff, 0xff,
- ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
+ { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
+ { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
+ ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */
+ { { 0x73, 0x02, 0x64 }, 0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
+ { { 0x73, 0x02, 0x64 }, 0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
+ { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
};
/*
@@ -67,42 +120,7 @@ static const struct alps_model_info alps_model_data[] = {
* isn't valid per PS/2 spec.
*/
-/*
- * PS/2 packet format
- *
- * byte 0: 0 0 YSGN XSGN 1 M R L
- * byte 1: X7 X6 X5 X4 X3 X2 X1 X0
- * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
- *
- * Note that the device never signals overflow condition.
- *
- * ALPS absolute Mode - new format
- *
- * byte 0: 1 ? ? ? 1 ? ? ?
- * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
- * byte 2: 0 x10 x9 x8 x7 ? fin ges
- * byte 3: 0 y9 y8 y7 1 M R L
- * byte 4: 0 y6 y5 y4 y3 y2 y1 y0
- * byte 5: 0 z6 z5 z4 z3 z2 z1 z0
- *
- * Dualpoint device -- interleaved packet format
- *
- * byte 0: 1 1 0 0 1 1 1 1
- * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
- * byte 2: 0 x10 x9 x8 x7 0 fin ges
- * byte 3: 0 0 YSGN XSGN 1 1 1 1
- * byte 4: X7 X6 X5 X4 X3 X2 X1 X0
- * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
- * byte 6: 0 y9 y8 y7 1 m r l
- * byte 7: 0 y6 y5 y4 y3 y2 y1 y0
- * byte 8: 0 z6 z5 z4 z3 z2 z1 z0
- *
- * CAPITALS = stick, miniscules = touchpad
- *
- * ?'s can have different meanings on different models,
- * such as wheel rotation, extra buttons, stick buttons
- * on a dualpoint, etc.
- */
+/* Packet formats are described in Documentation/input/alps.txt */
static bool alps_is_valid_first_byte(const struct alps_model_info *model,
unsigned char data)
@@ -137,7 +155,7 @@ static void alps_report_buttons(struct psmouse *psmouse,
input_sync(dev2);
}
-static void alps_process_packet(struct psmouse *psmouse)
+static void alps_process_packet_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
const struct alps_model_info *model = priv->i;
@@ -147,7 +165,7 @@ static void alps_process_packet(struct psmouse *psmouse)
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
- if (model->flags & ALPS_OLDPROTO) {
+ if (model->proto_version == ALPS_PROTO_V1) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
middle = 0;
@@ -239,6 +257,403 @@ static void alps_process_packet(struct psmouse *psmouse)
input_sync(dev);
}
+/*
+ * Process bitmap data from v3 and v4 protocols. Returns the number of
+ * fingers detected. A return value of 0 means at least one of the
+ * bitmaps was empty.
+ *
+ * The bitmaps don't have enough data to track fingers, so this function
+ * only generates points representing a bounding box of all contacts.
+ * These points are returned in x1, y1, x2, and y2 when the return value
+ * is greater than 0.
+ */
+static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+ int *x1, int *y1, int *x2, int *y2)
+{
+ struct alps_bitmap_point {
+ int start_bit;
+ int num_bits;
+ };
+
+ int fingers_x = 0, fingers_y = 0, fingers;
+ int i, bit, prev_bit;
+ struct alps_bitmap_point x_low = {0,}, x_high = {0,};
+ struct alps_bitmap_point y_low = {0,}, y_high = {0,};
+ struct alps_bitmap_point *point;
+
+ if (!x_map || !y_map)
+ return 0;
+
+ *x1 = *y1 = *x2 = *y2 = 0;
+
+ prev_bit = 0;
+ point = &x_low;
+ for (i = 0; x_map != 0; i++, x_map >>= 1) {
+ bit = x_map & 1;
+ if (bit) {
+ if (!prev_bit) {
+ point->start_bit = i;
+ fingers_x++;
+ }
+ point->num_bits++;
+ } else {
+ if (prev_bit)
+ point = &x_high;
+ else
+ point->num_bits = 0;
+ }
+ prev_bit = bit;
+ }
+
+ /*
+ * y bitmap is reversed for what we need (lower positions are in
+ * higher bits), so we process from the top end.
+ */
+ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+ prev_bit = 0;
+ point = &y_low;
+ for (i = 0; y_map != 0; i++, y_map <<= 1) {
+ bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1));
+ if (bit) {
+ if (!prev_bit) {
+ point->start_bit = i;
+ fingers_y++;
+ }
+ point->num_bits++;
+ } else {
+ if (prev_bit)
+ point = &y_high;
+ else
+ point->num_bits = 0;
+ }
+ prev_bit = bit;
+ }
+
+ /*
+ * Fingers can overlap, so we use the maximum count of fingers
+ * on either axis as the finger count.
+ */
+ fingers = max(fingers_x, fingers_y);
+
+ /*
+ * If total fingers is > 1 but either axis reports only a single
+ * contact, we have overlapping or adjacent fingers. For the
+ * purposes of creating a bounding box, divide the single contact
+ * (roughly) equally between the two points.
+ */
+ if (fingers > 1) {
+ if (fingers_x == 1) {
+ i = x_low.num_bits / 2;
+ x_low.num_bits = x_low.num_bits - i;
+ x_high.start_bit = x_low.start_bit + i;
+ x_high.num_bits = max(i, 1);
+ } else if (fingers_y == 1) {
+ i = y_low.num_bits / 2;
+ y_low.num_bits = y_low.num_bits - i;
+ y_high.start_bit = y_low.start_bit + i;
+ y_high.num_bits = max(i, 1);
+ }
+ }
+
+ *x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_X_BITS - 1));
+ *y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_Y_BITS - 1));
+
+ if (fingers > 1) {
+ *x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_X_BITS - 1));
+ *y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
+ (2 * (ALPS_BITMAP_Y_BITS - 1));
+ }
+
+ return fingers;
+}
+
+static void alps_set_slot(struct input_dev *dev, int slot, bool active,
+ int x, int y)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+ if (active) {
+ input_report_abs(dev, ABS_MT_POSITION_X, x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, y);
+ }
+}
+
+static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
+ int x1, int y1, int x2, int y2)
+{
+ alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
+ alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
+}
+
+static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = priv->dev2;
+ int x, y, z, left, right, middle;
+
+ /* Sanity check packet */
+ if (!(packet[0] & 0x40)) {
+ psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
+ return;
+ }
+
+ /*
+ * There's a special packet that seems to indicate the end
+ * of a stream of trackstick data. Filter these out.
+ */
+ if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f)
+ return;
+
+ x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f));
+ y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f));
+ z = (packet[4] & 0x7c) >> 2;
+
+ /*
+ * The x and y values tend to be quite large, and when used
+ * alone the trackstick is difficult to use. Scale them down
+ * to compensate.
+ */
+ x /= 8;
+ y /= 8;
+
+ input_report_rel(dev, REL_X, x);
+ input_report_rel(dev, REL_Y, -y);
+
+ /*
+ * Most ALPS models report the trackstick buttons in the touchpad
+ * packets, but a few report them here. No reliable way has been
+ * found to differentiate between the models upfront, so we enable
+ * the quirk in response to seeing a button press in the trackstick
+ * packet.
+ */
+ left = packet[3] & 0x01;
+ right = packet[3] & 0x02;
+ middle = packet[3] & 0x04;
+
+ if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) &&
+ (left || right || middle))
+ priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS;
+
+ if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) {
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_MIDDLE, middle);
+ }
+
+ input_sync(dev);
+ return;
+}
+
+static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = psmouse->dev;
+ struct input_dev *dev2 = priv->dev2;
+ int x, y, z;
+ int left, right, middle;
+ int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+ int fingers = 0, bmap_fingers;
+ unsigned int x_bitmap, y_bitmap;
+
+ /*
+ * There's no single feature of touchpad position and bitmap packets
+ * that can be used to distinguish between them. We rely on the fact
+ * that a bitmap packet should always follow a position packet with
+ * bit 6 of packet[4] set.
+ */
+ if (priv->multi_packet) {
+ /*
+ * Sometimes a position packet will indicate a multi-packet
+ * sequence, but then what follows is another position
+ * packet. Check for this, and when it happens process the
+ * position packet as usual.
+ */
+ if (packet[0] & 0x40) {
+ fingers = (packet[5] & 0x3) + 1;
+ x_bitmap = ((packet[4] & 0x7e) << 8) |
+ ((packet[1] & 0x7f) << 2) |
+ ((packet[0] & 0x30) >> 4);
+ y_bitmap = ((packet[3] & 0x70) << 4) |
+ ((packet[2] & 0x7f) << 1) |
+ (packet[4] & 0x01);
+
+ bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ &x1, &y1, &x2, &y2);
+
+ /*
+ * We shouldn't report more than one finger if
+ * we don't have two coordinates.
+ */
+ if (fingers > 1 && bmap_fingers < 2)
+ fingers = bmap_fingers;
+
+ /* Now process position packet */
+ packet = priv->multi_data;
+ } else {
+ priv->multi_packet = 0;
+ }
+ }
+
+ /*
+ * Bit 6 of byte 0 is not usually set in position packets. The only
+ * times it seems to be set is in situations where the data is
+ * suspect anyway, e.g. a palm resting flat on the touchpad. Given
+ * this combined with the fact that this bit is useful for filtering
+ * out misidentified bitmap packets, we reject anything with this
+ * bit set.
+ */
+ if (packet[0] & 0x40)
+ return;
+
+ if (!priv->multi_packet && (packet[4] & 0x40)) {
+ priv->multi_packet = 1;
+ memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
+ return;
+ }
+
+ priv->multi_packet = 0;
+
+ left = packet[3] & 0x01;
+ right = packet[3] & 0x02;
+ middle = packet[3] & 0x04;
+
+ x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) |
+ ((packet[0] & 0x30) >> 4);
+ y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f);
+ z = packet[5] & 0x7f;
+
+ /*
+ * Sometimes the hardware sends a single packet with z = 0
+ * in the middle of a stream. Real releases generate packets
+ * with x, y, and z all zero, so these seem to be flukes.
+ * Ignore them.
+ */
+ if (x && y && !z)
+ return;
+
+ /*
+ * If we don't have MT data or the bitmaps were empty, we have
+ * to rely on ST data.
+ */
+ if (!fingers) {
+ x1 = x;
+ y1 = y;
+ fingers = z > 0 ? 1 : 0;
+ }
+
+ if (z >= 64)
+ input_report_key(dev, BTN_TOUCH, 1);
+ else
+ input_report_key(dev, BTN_TOUCH, 0);
+
+ alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+ input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+ input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_MIDDLE, middle);
+
+ if (z > 0) {
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ }
+ input_report_abs(dev, ABS_PRESSURE, z);
+
+ input_sync(dev);
+
+ if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
+ left = packet[3] & 0x10;
+ right = packet[3] & 0x20;
+ middle = packet[3] & 0x40;
+
+ input_report_key(dev2, BTN_LEFT, left);
+ input_report_key(dev2, BTN_RIGHT, right);
+ input_report_key(dev2, BTN_MIDDLE, middle);
+ input_sync(dev2);
+ }
+}
+
+static void alps_process_packet_v3(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+
+ /*
+ * v3 protocol packets come in three types, two representing
+ * touchpad data and one representing trackstick data.
+ * Trackstick packets seem to be distinguished by always
+ * having 0x3f in the last byte. This value has never been
+ * observed in the last byte of either of the other types
+ * of packets.
+ */
+ if (packet[5] == 0x3f) {
+ alps_process_trackstick_packet_v3(psmouse);
+ return;
+ }
+
+ alps_process_touchpad_packet_v3(psmouse);
+}
+
+static void alps_process_packet_v4(struct psmouse *psmouse)
+{
+ unsigned char *packet = psmouse->packet;
+ struct input_dev *dev = psmouse->dev;
+ int x, y, z;
+ int left, right;
+
+ left = packet[4] & 0x01;
+ right = packet[4] & 0x02;
+
+ x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
+ ((packet[0] & 0x30) >> 4);
+ y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
+ z = packet[5] & 0x7f;
+
+ if (z >= 64)
+ input_report_key(dev, BTN_TOUCH, 1);
+ else
+ input_report_key(dev, BTN_TOUCH, 0);
+
+ if (z > 0) {
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ }
+ input_report_abs(dev, ABS_PRESSURE, z);
+
+ input_report_key(dev, BTN_TOOL_FINGER, z > 0);
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+
+ input_sync(dev);
+}
+
+static void alps_process_packet(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
+
+ switch (model->proto_version) {
+ case ALPS_PROTO_V1:
+ case ALPS_PROTO_V2:
+ alps_process_packet_v1_v2(psmouse);
+ break;
+ case ALPS_PROTO_V3:
+ alps_process_packet_v3(psmouse);
+ break;
+ case ALPS_PROTO_V4:
+ alps_process_packet_v4(psmouse);
+ break;
+ }
+}
+
static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
unsigned char packet[],
bool report_buttons)
@@ -344,7 +759,7 @@ static void alps_flush_packet(unsigned long data)
serio_pause_rx(psmouse->ps2dev.serio);
- if (psmouse->pktcnt == 6) {
+ if (psmouse->pktcnt == psmouse->pktsize) {
/*
* We did not any more data in reasonable amount of time.
@@ -395,8 +810,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
return PSMOUSE_BAD_DATA;
}
- /* Bytes 2 - 6 should have 0 in the highest bit */
- if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
+ /* Bytes 2 - pktsize should have 0 in the highest bit */
+ if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
@@ -404,7 +819,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
return PSMOUSE_BAD_DATA;
}
- if (psmouse->pktcnt == 6) {
+ if (psmouse->pktcnt == psmouse->pktsize) {
alps_process_packet(psmouse);
return PSMOUSE_FULL_PACKET;
}
@@ -412,11 +827,127 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
return PSMOUSE_GOOD_DATA;
}
+static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ struct alps_data *priv = psmouse->private;
+ int command;
+ unsigned char *param;
+ unsigned char dummy[4];
+
+ BUG_ON(nibble > 0xf);
+
+ command = priv->nibble_commands[nibble].command;
+ param = (command & 0x0f00) ?
+ dummy : (unsigned char *)&priv->nibble_commands[nibble].data;
+
+ if (ps2_command(ps2dev, param, command))
+ return -1;
+
+ return 0;
+}
+
+static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ struct alps_data *priv = psmouse->private;
+ int i, nibble;
+
+ if (ps2_command(ps2dev, NULL, priv->addr_command))
+ return -1;
+
+ for (i = 12; i >= 0; i -= 4) {
+ nibble = (addr >> i) & 0xf;
+ if (alps_command_mode_send_nibble(psmouse, nibble))
+ return -1;
+ }
+
+ return 0;
+}
+
+static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[4];
+
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+ return -1;
+
+ /*
+ * The address being read is returned in the first two bytes
+ * of the result. Check that this address matches the expected
+ * address.
+ */
+ if (addr != ((param[0] << 8) | param[1]))
+ return -1;
+
+ return param[2];
+}
+
+static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
+{
+ if (alps_command_mode_set_addr(psmouse, addr))
+ return -1;
+ return __alps_command_mode_read_reg(psmouse, addr);
+}
+
+static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value)
+{
+ if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf))
+ return -1;
+ if (alps_command_mode_send_nibble(psmouse, value & 0xf))
+ return -1;
+ return 0;
+}
+
+static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
+ u8 value)
+{
+ if (alps_command_mode_set_addr(psmouse, addr))
+ return -1;
+ return __alps_command_mode_write_reg(psmouse, value);
+}
+
+static int alps_enter_command_mode(struct psmouse *psmouse,
+ unsigned char *resp)
+{
+ unsigned char param[4];
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ psmouse_err(psmouse, "failed to enter command mode\n");
+ return -1;
+ }
+
+ if (param[0] != 0x88 && param[1] != 0x07) {
+ psmouse_dbg(psmouse,
+ "unknown response while entering command mode: %2.2x %2.2x %2.2x\n",
+ param[0], param[1], param[2]);
+ return -1;
+ }
+
+ if (resp)
+ *resp = param[2];
+ return 0;
+}
+
+static inline int alps_exit_command_mode(struct psmouse *psmouse)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM))
+ return -1;
+ return 0;
+}
+
static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
unsigned char param[4];
+ const struct alps_model_info *model = NULL;
int i;
/*
@@ -464,12 +995,41 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
*version = (param[0] << 8) | (param[1] << 4) | i;
}
- for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
if (!memcmp(param, alps_model_data[i].signature,
- sizeof(alps_model_data[i].signature)))
- return alps_model_data + i;
+ sizeof(alps_model_data[i].signature))) {
+ model = alps_model_data + i;
+ break;
+ }
+ }
- return NULL;
+ if (model && model->proto_version > ALPS_PROTO_V2) {
+ /*
+ * Need to check command mode response to identify
+ * model
+ */
+ model = NULL;
+ if (alps_enter_command_mode(psmouse, param)) {
+ psmouse_warn(psmouse,
+ "touchpad failed to enter command mode\n");
+ } else {
+ for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+ if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
+ alps_model_data[i].command_mode_resp == param[0]) {
+ model = alps_model_data + i;
+ break;
+ }
+ }
+ alps_exit_command_mode(psmouse);
+
+ if (!model)
+ psmouse_dbg(psmouse,
+ "Unknown command mode response %2.2x\n",
+ param[0]);
+ }
+ }
+
+ return model;
}
/*
@@ -477,7 +1037,7 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
* subsequent commands. It looks like glidepad is behind stickpointer,
* I'd thought it would be other way around...
*/
-static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
+static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
@@ -494,7 +1054,7 @@ static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
return 0;
}
-static int alps_absolute_mode(struct psmouse *psmouse)
+static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
@@ -565,17 +1125,17 @@ static int alps_tap_mode(struct psmouse *psmouse, int enable)
static int alps_poll(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
- unsigned char buf[6];
+ unsigned char buf[sizeof(psmouse->packet)];
bool poll_failed;
if (priv->i->flags & ALPS_PASS)
- alps_passthrough_mode(psmouse, true);
+ alps_passthrough_mode_v2(psmouse, true);
poll_failed = ps2_command(&psmouse->ps2dev, buf,
PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
if (priv->i->flags & ALPS_PASS)
- alps_passthrough_mode(psmouse, false);
+ alps_passthrough_mode_v2(psmouse, false);
if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
return -1;
@@ -592,13 +1152,13 @@ static int alps_poll(struct psmouse *psmouse)
return 0;
}
-static int alps_hw_init(struct psmouse *psmouse)
+static int alps_hw_init_v1_v2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
const struct alps_model_info *model = priv->i;
if ((model->flags & ALPS_PASS) &&
- alps_passthrough_mode(psmouse, true)) {
+ alps_passthrough_mode_v2(psmouse, true)) {
return -1;
}
@@ -607,13 +1167,13 @@ static int alps_hw_init(struct psmouse *psmouse)
return -1;
}
- if (alps_absolute_mode(psmouse)) {
+ if (alps_absolute_mode_v1_v2(psmouse)) {
psmouse_err(psmouse, "Failed to enable absolute mode\n");
return -1;
}
if ((model->flags & ALPS_PASS) &&
- alps_passthrough_mode(psmouse, false)) {
+ alps_passthrough_mode_v2(psmouse, false)) {
return -1;
}
@@ -626,6 +1186,297 @@ static int alps_hw_init(struct psmouse *psmouse)
return 0;
}
+/*
+ * Enable or disable passthrough mode to the trackstick. Must be in
+ * command mode when calling this function.
+ */
+static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable)
+{
+ int reg_val;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+ if (reg_val == -1)
+ return -1;
+
+ if (enable)
+ reg_val |= 0x01;
+ else
+ reg_val &= ~0x01;
+
+ if (__alps_command_mode_write_reg(psmouse, reg_val))
+ return -1;
+
+ return 0;
+}
+
+/* Must be in command mode when calling this function */
+static int alps_absolute_mode_v3(struct psmouse *psmouse)
+{
+ int reg_val;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
+ if (reg_val == -1)
+ return -1;
+
+ reg_val |= 0x06;
+ if (__alps_command_mode_write_reg(psmouse, reg_val))
+ return -1;
+
+ return 0;
+}
+
+static int alps_hw_init_v3(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ int reg_val;
+ unsigned char param[4];
+
+ priv->nibble_commands = alps_v3_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+
+ if (alps_enter_command_mode(psmouse, NULL))
+ goto error;
+
+ /* Check for trackstick */
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+ if (reg_val == -1)
+ goto error;
+ if (reg_val & 0x80) {
+ if (alps_passthrough_mode_v3(psmouse, true))
+ goto error;
+ if (alps_exit_command_mode(psmouse))
+ goto error;
+
+ /*
+ * E7 report for the trackstick
+ *
+ * There have been reports of failures to seem to trace back
+ * to the above trackstick check failing. When these occur
+ * this E7 report fails, so when that happens we continue
+ * with the assumption that there isn't a trackstick after
+ * all.
+ */
+ param[0] = 0x64;
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ psmouse_warn(psmouse, "trackstick E7 report failed\n");
+ } else {
+ psmouse_dbg(psmouse,
+ "trackstick E7 report: %2.2x %2.2x %2.2x\n",
+ param[0], param[1], param[2]);
+
+ /*
+ * Not sure what this does, but it is absolutely
+ * essential. Without it, the touchpad does not
+ * work at all and the trackstick just emits normal
+ * PS/2 packets.
+ */
+ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+ alps_command_mode_send_nibble(psmouse, 0x9) ||
+ alps_command_mode_send_nibble(psmouse, 0x4)) {
+ psmouse_err(psmouse,
+ "Error sending magic E6 sequence\n");
+ goto error_passthrough;
+ }
+ }
+
+ if (alps_enter_command_mode(psmouse, NULL))
+ goto error_passthrough;
+ if (alps_passthrough_mode_v3(psmouse, false))
+ goto error;
+ }
+
+ if (alps_absolute_mode_v3(psmouse)) {
+ psmouse_err(psmouse, "Failed to enter absolute mode\n");
+ goto error;
+ }
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0006);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
+ goto error;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0007);
+ if (reg_val == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
+ goto error;
+
+ if (alps_command_mode_read_reg(psmouse, 0x0144) == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, 0x04))
+ goto error;
+
+ if (alps_command_mode_read_reg(psmouse, 0x0159) == -1)
+ goto error;
+ if (__alps_command_mode_write_reg(psmouse, 0x03))
+ goto error;
+
+ if (alps_command_mode_read_reg(psmouse, 0x0163) == -1)
+ goto error;
+ if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03))
+ goto error;
+
+ if (alps_command_mode_read_reg(psmouse, 0x0162) == -1)
+ goto error;
+ if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
+ goto error;
+
+ /*
+ * This ensures the trackstick packets are in the format
+ * supported by this driver. If bit 1 isn't set the packet
+ * format is different.
+ */
+ if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82))
+ goto error;
+
+ alps_exit_command_mode(psmouse);
+
+ /* Set rate and enable data reporting */
+ param[0] = 0x64;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
+ psmouse_err(psmouse, "Failed to enable data reporting\n");
+ return -1;
+ }
+
+ return 0;
+
+error_passthrough:
+ /* Something failed while in passthrough mode, so try to get out */
+ if (!alps_enter_command_mode(psmouse, NULL))
+ alps_passthrough_mode_v3(psmouse, false);
+error:
+ /*
+ * Leaving the touchpad in command mode will essentially render
+ * it unusable until the machine reboots, so exit it here just
+ * to be safe
+ */
+ alps_exit_command_mode(psmouse);
+ return -1;
+}
+
+/* Must be in command mode when calling this function */
+static int alps_absolute_mode_v4(struct psmouse *psmouse)
+{
+ int reg_val;
+
+ reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
+ if (reg_val == -1)
+ return -1;
+
+ reg_val |= 0x02;
+ if (__alps_command_mode_write_reg(psmouse, reg_val))
+ return -1;
+
+ return 0;
+}
+
+static int alps_hw_init_v4(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[4];
+
+ priv->nibble_commands = alps_v4_nibble_commands;
+ priv->addr_command = PSMOUSE_CMD_DISABLE;
+
+ if (alps_enter_command_mode(psmouse, NULL))
+ goto error;
+
+ if (alps_absolute_mode_v4(psmouse)) {
+ psmouse_err(psmouse, "Failed to enter absolute mode\n");
+ goto error;
+ }
+
+ if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03))
+ goto error;
+
+ if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03))
+ goto error;
+
+ alps_exit_command_mode(psmouse);
+
+ /*
+ * This sequence changes the output from a 9-byte to an
+ * 8-byte format. All the same data seems to be present,
+ * just in a more compact format.
+ */
+ param[0] = 0xc8;
+ param[1] = 0x64;
+ param[2] = 0x50;
+ if (ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, &param[2], PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
+ return -1;
+
+ /* Set rate and enable data reporting */
+ param[0] = 0x64;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
+ ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
+ psmouse_err(psmouse, "Failed to enable data reporting\n");
+ return -1;
+ }
+
+ return 0;
+
+error:
+ /*
+ * Leaving the touchpad in command mode will essentially render
+ * it unusable until the machine reboots, so exit it here just
+ * to be safe
+ */
+ alps_exit_command_mode(psmouse);
+ return -1;
+}
+
+static int alps_hw_init(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
+ int ret = -1;
+
+ switch (model->proto_version) {
+ case ALPS_PROTO_V1:
+ case ALPS_PROTO_V2:
+ ret = alps_hw_init_v1_v2(psmouse);
+ break;
+ case ALPS_PROTO_V3:
+ ret = alps_hw_init_v3(psmouse);
+ break;
+ case ALPS_PROTO_V4:
+ ret = alps_hw_init_v4(psmouse);
+ break;
+ }
+
+ return ret;
+}
+
static int alps_reconnect(struct psmouse *psmouse)
{
const struct alps_model_info *model;
@@ -666,6 +1517,8 @@ int alps_init(struct psmouse *psmouse)
psmouse->private = priv;
+ psmouse_reset(psmouse);
+
model = alps_get_model(psmouse, &version);
if (!model)
goto init_fail;
@@ -693,8 +1546,29 @@ int alps_init(struct psmouse *psmouse)
BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
- input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+
+ switch (model->proto_version) {
+ case ALPS_PROTO_V1:
+ case ALPS_PROTO_V2:
+ input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+ break;
+ case ALPS_PROTO_V3:
+ set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+ input_mt_init_slots(dev1, 2);
+ input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+
+ set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
+ set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+ /* fall through */
+ case ALPS_PROTO_V4:
+ input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
+ input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+ break;
+ }
+
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
if (model->flags & ALPS_WHEEL) {
@@ -737,7 +1611,7 @@ int alps_init(struct psmouse *psmouse)
psmouse->poll = alps_poll;
psmouse->disconnect = alps_disconnect;
psmouse->reconnect = alps_reconnect;
- psmouse->pktsize = 6;
+ psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6;
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 904ed8b3c8b..a00a4ab92a0 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -12,20 +12,39 @@
#ifndef _ALPS_H
#define _ALPS_H
+#define ALPS_PROTO_V1 0
+#define ALPS_PROTO_V2 1
+#define ALPS_PROTO_V3 2
+#define ALPS_PROTO_V4 3
+
struct alps_model_info {
unsigned char signature[3];
+ unsigned char command_mode_resp; /* v3/v4 only */
+ unsigned char proto_version;
unsigned char byte0, mask0;
unsigned char flags;
};
+struct alps_nibble_commands {
+ int command;
+ unsigned char data;
+};
+
struct alps_data {
struct input_dev *dev2; /* Relative device */
char phys[32]; /* Phys */
const struct alps_model_info *i;/* Info */
+ const struct alps_nibble_commands *nibble_commands;
+ int addr_command; /* Command to set register address */
int prev_fin; /* Finger bit from previous packet */
+ int multi_packet; /* Multi-packet data in progress */
+ unsigned char multi_data[6]; /* Saved multi-packet data */
+ u8 quirks;
struct timer_list timer;
};
+#define ALPS_QUIRK_TRACKSTICK_BUTTONS 1 /* trakcstick buttons in trackstick packet */
+
#ifdef CONFIG_MOUSE_PS2_ALPS
int alps_detect(struct psmouse *psmouse, bool set_properties);
int alps_init(struct psmouse *psmouse);
diff --git a/drivers/input/mouse/amimouse.c b/drivers/input/mouse/amimouse.c
index ff5f61a0fd3..39be7b82c04 100644
--- a/drivers/input/mouse/amimouse.c
+++ b/drivers/input/mouse/amimouse.c
@@ -140,25 +140,13 @@ static int __exit amimouse_remove(struct platform_device *pdev)
}
static struct platform_driver amimouse_driver = {
+ .probe = amimouse_probe,
.remove = __exit_p(amimouse_remove),
.driver = {
.name = "amiga-mouse",
.owner = THIS_MODULE,
},
};
-
-static int __init amimouse_init(void)
-{
- return platform_driver_probe(&amimouse_driver, amimouse_probe);
-}
-
-module_init(amimouse_init);
-
-static void __exit amimouse_exit(void)
-{
- platform_driver_unregister(&amimouse_driver);
-}
-
-module_exit(amimouse_exit);
+module_platform_driver(amimouse_driver);
MODULE_ALIAS("platform:amiga-mouse");
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index e2a9867c19d..d2c0db159b1 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -43,6 +43,24 @@ static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c,
}
/*
+ * V3 and later support this fast command
+ */
+static int elantech_send_cmd(struct psmouse *psmouse, unsigned char c,
+ unsigned char *param)
+{
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+ if (ps2_command(ps2dev, NULL, ETP_PS2_CUSTOM_COMMAND) ||
+ ps2_command(ps2dev, NULL, c) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ psmouse_err(psmouse, "%s query 0x%02x failed.\n", __func__, c);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
* A retrying version of ps2_command
*/
static int elantech_ps2_command(struct psmouse *psmouse,
@@ -863,13 +881,13 @@ static int elantech_set_range(struct psmouse *psmouse,
i = (etd->fw_version > 0x020800 &&
etd->fw_version < 0x020900) ? 1 : 2;
- if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -1;
fixed_dpi = param[1] & 0x10;
if (((etd->fw_version >> 16) == 0x14) && fixed_dpi) {
- if (synaptics_send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
+ if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, param))
return -1;
*x_max = (etd->capabilities[1] - i) * param[1] / 2;
@@ -888,7 +906,7 @@ static int elantech_set_range(struct psmouse *psmouse,
break;
case 3:
- if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -1;
*x_max = (0x0f & param[0]) << 8 | param[1];
@@ -896,7 +914,7 @@ static int elantech_set_range(struct psmouse *psmouse,
break;
case 4:
- if (synaptics_send_cmd(psmouse, ETP_FW_ID_QUERY, param))
+ if (etd->send_cmd(psmouse, ETP_FW_ID_QUERY, param))
return -1;
*x_max = (0x0f & param[0]) << 8 | param[1];
@@ -913,6 +931,30 @@ static int elantech_set_range(struct psmouse *psmouse,
}
/*
+ * (value from firmware) * 10 + 790 = dpi
+ * we also have to convert dpi to dots/mm (*10/254 to avoid floating point)
+ */
+static unsigned int elantech_convert_res(unsigned int val)
+{
+ return (val * 10 + 790) * 10 / 254;
+}
+
+static int elantech_get_resolution_v4(struct psmouse *psmouse,
+ unsigned int *x_res,
+ unsigned int *y_res)
+{
+ unsigned char param[3];
+
+ if (elantech_send_cmd(psmouse, ETP_RESOLUTION_QUERY, param))
+ return -1;
+
+ *x_res = elantech_convert_res(param[1] & 0x0f);
+ *y_res = elantech_convert_res((param[1] & 0xf0) >> 4);
+
+ return 0;
+}
+
+/*
* Set the appropriate event bits for the input subsystem
*/
static int elantech_set_input_params(struct psmouse *psmouse)
@@ -920,6 +962,7 @@ static int elantech_set_input_params(struct psmouse *psmouse)
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
+ unsigned int x_res = 0, y_res = 0;
if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
@@ -967,10 +1010,20 @@ static int elantech_set_input_params(struct psmouse *psmouse)
break;
case 4:
+ if (elantech_get_resolution_v4(psmouse, &x_res, &y_res)) {
+ /*
+ * if query failed, print a warning and leave the values
+ * zero to resemble synaptics.c behavior.
+ */
+ psmouse_warn(psmouse, "couldn't query resolution data.\n");
+ }
+
__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
/* For X to recognize me as touchpad. */
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
+ input_abs_set_res(dev, ABS_X, x_res);
+ input_abs_set_res(dev, ABS_Y, y_res);
/*
* range of pressure and width is the same as v2,
* report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
@@ -983,6 +1036,8 @@ static int elantech_set_input_params(struct psmouse *psmouse)
input_mt_init_slots(dev, ETP_MAX_FINGERS);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
+ input_abs_set_res(dev, ABS_MT_POSITION_X, x_res);
+ input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res);
input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
/*
@@ -1031,16 +1086,13 @@ static ssize_t elantech_set_int_attr(struct psmouse *psmouse,
struct elantech_data *etd = psmouse->private;
struct elantech_attr_data *attr = data;
unsigned char *reg = (unsigned char *) etd + attr->field_offset;
- unsigned long value;
+ unsigned char value;
int err;
- err = strict_strtoul(buf, 16, &value);
+ err = kstrtou8(buf, 16, &value);
if (err)
return err;
- if (value > 0xff)
- return -EINVAL;
-
/* Do we need to preserve some bits for version 2 hardware too? */
if (etd->hw_version == 1) {
if (attr->reg == 0x10)
@@ -1233,9 +1285,11 @@ static int elantech_set_properties(struct elantech_data *etd)
}
}
- /*
- * Turn on packet checking by default.
- */
+ /* decide which send_cmd we're gonna use early */
+ etd->send_cmd = etd->hw_version >= 3 ? elantech_send_cmd :
+ synaptics_send_cmd;
+
+ /* Turn on packet checking by default */
etd->paritycheck = 1;
/*
@@ -1291,7 +1345,7 @@ int elantech_init(struct psmouse *psmouse)
"assuming hardware version %d (with firmware version 0x%02x%02x%02x)\n",
etd->hw_version, param[0], param[1], param[2]);
- if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
+ if (etd->send_cmd(psmouse, ETP_CAPABILITIES_QUERY,
etd->capabilities)) {
psmouse_err(psmouse, "failed to query capabilities.\n");
goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index 9e5f1aabea7..46db3be45ac 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -20,6 +20,7 @@
#define ETP_FW_VERSION_QUERY 0x01
#define ETP_CAPABILITIES_QUERY 0x02
#define ETP_SAMPLE_QUERY 0x03
+#define ETP_RESOLUTION_QUERY 0x04
/*
* Command values for register reading or writing
@@ -135,6 +136,7 @@ struct elantech_data {
unsigned int width;
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
+ int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 58902fbb989..a9ad8e1402b 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -178,18 +178,7 @@ static struct platform_driver gpio_mouse_device_driver = {
.owner = THIS_MODULE,
}
};
-
-static int __init gpio_mouse_init(void)
-{
- return platform_driver_register(&gpio_mouse_device_driver);
-}
-module_init(gpio_mouse_init);
-
-static void __exit gpio_mouse_exit(void)
-{
- platform_driver_unregister(&gpio_mouse_device_driver);
-}
-module_exit(gpio_mouse_exit);
+module_platform_driver(gpio_mouse_device_driver);
MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("GPIO mouse driver");
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 0470dd46b56..1c5d521de60 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -789,11 +789,14 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
struct hgpk_data *priv = psmouse->private;
- unsigned long value;
+ unsigned int value;
int err;
- err = strict_strtoul(buf, 10, &value);
- if (err || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
if (value != priv->powered) {
@@ -881,11 +884,14 @@ static ssize_t hgpk_trigger_recal(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
struct hgpk_data *priv = psmouse->private;
- unsigned long value;
+ unsigned int value;
int err;
- err = strict_strtoul(buf, 10, &value);
- if (err || value != 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value != 1)
return -EINVAL;
/*
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index faac2c3bef7..84de2fc6acc 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -155,9 +155,14 @@ static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse,
static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
- unsigned long value;
+ unsigned int value;
+ int err;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
return -EINVAL;
ps2pp_set_smartscroll(psmouse, value);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 9f352fbd7b4..de7e8bc17b1 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -127,7 +127,7 @@ struct psmouse_protocol {
* relevant events to the input module once full packet has arrived.
*/
-static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
+psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
unsigned char *packet = psmouse->packet;
@@ -418,6 +418,49 @@ int psmouse_reset(struct psmouse *psmouse)
return 0;
}
+/*
+ * Here we set the mouse resolution.
+ */
+
+void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution)
+{
+ static const unsigned char params[] = { 0, 1, 2, 2, 3 };
+ unsigned char p;
+
+ if (resolution == 0 || resolution > 200)
+ resolution = 200;
+
+ p = params[resolution / 50];
+ ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES);
+ psmouse->resolution = 25 << p;
+}
+
+/*
+ * Here we set the mouse report rate.
+ */
+
+static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate)
+{
+ static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 };
+ unsigned char r;
+ int i = 0;
+
+ while (rates[i] > rate) i++;
+ r = rates[i];
+ ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE);
+ psmouse->rate = r;
+}
+
+/*
+ * psmouse_poll() - default poll handler. Everyone except for ALPS uses it.
+ */
+
+static int psmouse_poll(struct psmouse *psmouse)
+{
+ return ps2_command(&psmouse->ps2dev, psmouse->packet,
+ PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
+}
+
/*
* Genius NetMouse magic init.
@@ -603,6 +646,56 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties)
}
/*
+ * Apply default settings to the psmouse structure. Most of them will
+ * be overridden by individual protocol initialization routines.
+ */
+
+static void psmouse_apply_defaults(struct psmouse *psmouse)
+{
+ struct input_dev *input_dev = psmouse->dev;
+
+ memset(input_dev->evbit, 0, sizeof(input_dev->evbit));
+ memset(input_dev->keybit, 0, sizeof(input_dev->keybit));
+ memset(input_dev->relbit, 0, sizeof(input_dev->relbit));
+ memset(input_dev->absbit, 0, sizeof(input_dev->absbit));
+ memset(input_dev->mscbit, 0, sizeof(input_dev->mscbit));
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(EV_REL, input_dev->evbit);
+
+ __set_bit(BTN_LEFT, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+
+ __set_bit(REL_X, input_dev->relbit);
+ __set_bit(REL_Y, input_dev->relbit);
+
+ psmouse->set_rate = psmouse_set_rate;
+ psmouse->set_resolution = psmouse_set_resolution;
+ psmouse->poll = psmouse_poll;
+ psmouse->protocol_handler = psmouse_process_byte;
+ psmouse->pktsize = 3;
+ psmouse->reconnect = NULL;
+ psmouse->disconnect = NULL;
+ psmouse->cleanup = NULL;
+ psmouse->pt_activate = NULL;
+ psmouse->pt_deactivate = NULL;
+}
+
+/*
+ * Apply default settings to the psmouse structure and call specified
+ * protocol detection or initialization routine.
+ */
+static int psmouse_do_detect(int (*detect)(struct psmouse *psmouse,
+ bool set_properties),
+ struct psmouse *psmouse, bool set_properties)
+{
+ if (set_properties)
+ psmouse_apply_defaults(psmouse);
+
+ return detect(psmouse, set_properties);
+}
+
+/*
* psmouse_extensions() probes for any extensions to the basic PS/2 protocol
* the mouse may have.
*/
@@ -616,7 +709,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
* We always check for lifebook because it does not disturb mouse
* (it only checks DMI information).
*/
- if (lifebook_detect(psmouse, set_properties) == 0) {
+ if (psmouse_do_detect(lifebook_detect, psmouse, set_properties) == 0) {
if (max_proto > PSMOUSE_IMEX) {
if (!set_properties || lifebook_init(psmouse) == 0)
return PSMOUSE_LIFEBOOK;
@@ -628,15 +721,18 @@ static int psmouse_extensions(struct psmouse *psmouse,
* upsets the thinkingmouse).
*/
- if (max_proto > PSMOUSE_IMEX && thinking_detect(psmouse, set_properties) == 0)
+ if (max_proto > PSMOUSE_IMEX &&
+ psmouse_do_detect(thinking_detect, psmouse, set_properties) == 0) {
return PSMOUSE_THINKPS;
+ }
/*
* Try Synaptics TouchPad. Note that probing is done even if Synaptics protocol
* support is disabled in config - we need to know if it is synaptics so we
* can reset it properly after probing for intellimouse.
*/
- if (max_proto > PSMOUSE_PS2 && synaptics_detect(psmouse, set_properties) == 0) {
+ if (max_proto > PSMOUSE_PS2 &&
+ psmouse_do_detect(synaptics_detect, psmouse, set_properties) == 0) {
synaptics_hardware = true;
if (max_proto > PSMOUSE_IMEX) {
@@ -667,7 +763,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
*/
if (max_proto > PSMOUSE_IMEX) {
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
- if (alps_detect(psmouse, set_properties) == 0) {
+ if (psmouse_do_detect(alps_detect,
+ psmouse, set_properties) == 0) {
if (!set_properties || alps_init(psmouse) == 0)
return PSMOUSE_ALPS;
/*
@@ -681,7 +778,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
* Try OLPC HGPK touchpad.
*/
if (max_proto > PSMOUSE_IMEX &&
- hgpk_detect(psmouse, set_properties) == 0) {
+ psmouse_do_detect(hgpk_detect, psmouse, set_properties) == 0) {
if (!set_properties || hgpk_init(psmouse) == 0)
return PSMOUSE_HGPK;
/*
@@ -694,7 +791,7 @@ static int psmouse_extensions(struct psmouse *psmouse,
* Try Elantech touchpad.
*/
if (max_proto > PSMOUSE_IMEX &&
- elantech_detect(psmouse, set_properties) == 0) {
+ psmouse_do_detect(elantech_detect, psmouse, set_properties) == 0) {
if (!set_properties || elantech_init(psmouse) == 0)
return PSMOUSE_ELANTECH;
/*
@@ -703,18 +800,21 @@ static int psmouse_extensions(struct psmouse *psmouse,
max_proto = PSMOUSE_IMEX;
}
-
if (max_proto > PSMOUSE_IMEX) {
- if (genius_detect(psmouse, set_properties) == 0)
+ if (psmouse_do_detect(genius_detect,
+ psmouse, set_properties) == 0)
return PSMOUSE_GENPS;
- if (ps2pp_init(psmouse, set_properties) == 0)
+ if (psmouse_do_detect(ps2pp_init,
+ psmouse, set_properties) == 0)
return PSMOUSE_PS2PP;
- if (trackpoint_detect(psmouse, set_properties) == 0)
+ if (psmouse_do_detect(trackpoint_detect,
+ psmouse, set_properties) == 0)
return PSMOUSE_TRACKPOINT;
- if (touchkit_ps2_detect(psmouse, set_properties) == 0)
+ if (psmouse_do_detect(touchkit_ps2_detect,
+ psmouse, set_properties) == 0)
return PSMOUSE_TOUCHKIT_PS2;
}
@@ -723,7 +823,8 @@ static int psmouse_extensions(struct psmouse *psmouse,
* Trackpoint devices (causing TP_READ_ID command to time out).
*/
if (max_proto > PSMOUSE_IMEX) {
- if (fsp_detect(psmouse, set_properties) == 0) {
+ if (psmouse_do_detect(fsp_detect,
+ psmouse, set_properties) == 0) {
if (!set_properties || fsp_init(psmouse) == 0)
return PSMOUSE_FSP;
/*
@@ -741,17 +842,23 @@ static int psmouse_extensions(struct psmouse *psmouse,
ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
psmouse_reset(psmouse);
- if (max_proto >= PSMOUSE_IMEX && im_explorer_detect(psmouse, set_properties) == 0)
+ if (max_proto >= PSMOUSE_IMEX &&
+ psmouse_do_detect(im_explorer_detect,
+ psmouse, set_properties) == 0) {
return PSMOUSE_IMEX;
+ }
- if (max_proto >= PSMOUSE_IMPS && intellimouse_detect(psmouse, set_properties) == 0)
+ if (max_proto >= PSMOUSE_IMPS &&
+ psmouse_do_detect(intellimouse_detect,
+ psmouse, set_properties) == 0) {
return PSMOUSE_IMPS;
+ }
/*
* Okay, all failed, we have a standard mouse here. The number of the buttons
* is still a question, though. We assume 3.
*/
- ps2bare_detect(psmouse, set_properties);
+ psmouse_do_detect(ps2bare_detect, psmouse, set_properties);
if (synaptics_hardware) {
/*
@@ -819,6 +926,13 @@ static const struct psmouse_protocol psmouse_protocols[] = {
.detect = synaptics_detect,
.init = synaptics_init,
},
+ {
+ .type = PSMOUSE_SYNAPTICS_RELATIVE,
+ .name = "SynRelPS/2",
+ .alias = "synaptics-relative",
+ .detect = synaptics_detect,
+ .init = synaptics_init_relative,
+ },
#endif
#ifdef CONFIG_MOUSE_PS2_ALPS
{
@@ -958,39 +1072,6 @@ static int psmouse_probe(struct psmouse *psmouse)
}
/*
- * Here we set the mouse resolution.
- */
-
-void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution)
-{
- static const unsigned char params[] = { 0, 1, 2, 2, 3 };
- unsigned char p;
-
- if (resolution == 0 || resolution > 200)
- resolution = 200;
-
- p = params[resolution / 50];
- ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES);
- psmouse->resolution = 25 << p;
-}
-
-/*
- * Here we set the mouse report rate.
- */
-
-static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate)
-{
- static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 };
- unsigned char r;
- int i = 0;
-
- while (rates[i] > rate) i++;
- r = rates[i];
- ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE);
- psmouse->rate = r;
-}
-
-/*
* psmouse_initialize() initializes the mouse to a sane state.
*/
@@ -1035,16 +1116,6 @@ static void psmouse_deactivate(struct psmouse *psmouse)
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
}
-/*
- * psmouse_poll() - default poll handler. Everyone except for ALPS uses it.
- */
-
-static int psmouse_poll(struct psmouse *psmouse)
-{
- return ps2_command(&psmouse->ps2dev, psmouse->packet,
- PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
-}
-
/*
* psmouse_resync() attempts to re-validate current protocol.
@@ -1245,18 +1316,9 @@ static int psmouse_switch_protocol(struct psmouse *psmouse,
input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- input_dev->keybit[BIT_WORD(BTN_MOUSE)] =
- BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
- input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
-
- psmouse->set_rate = psmouse_set_rate;
- psmouse->set_resolution = psmouse_set_resolution;
- psmouse->poll = psmouse_poll;
- psmouse->protocol_handler = psmouse_process_byte;
- psmouse->pktsize = 3;
-
if (proto && (proto->detect || proto->init)) {
+ psmouse_apply_defaults(psmouse);
+
if (proto->detect && proto->detect(psmouse, true) < 0)
return -1;
@@ -1558,13 +1620,12 @@ static ssize_t psmouse_show_int_attr(struct psmouse *psmouse, void *offset, char
static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const char *buf, size_t count)
{
unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset);
- unsigned long value;
-
- if (strict_strtoul(buf, 10, &value))
- return -EINVAL;
+ unsigned int value;
+ int err;
- if ((unsigned int)value != value)
- return -EINVAL;
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
*field = value;
@@ -1671,10 +1732,12 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co
static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const char *buf, size_t count)
{
- unsigned long value;
+ unsigned int value;
+ int err;
- if (strict_strtoul(buf, 10, &value))
- return -EINVAL;
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
psmouse->set_rate(psmouse, value);
return count;
@@ -1682,10 +1745,12 @@ static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const
static ssize_t psmouse_attr_set_resolution(struct psmouse *psmouse, void *data, const char *buf, size_t count)
{
- unsigned long value;
+ unsigned int value;
+ int err;
- if (strict_strtoul(buf, 10, &value))
- return -EINVAL;
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
psmouse->set_resolution(psmouse, value);
return count;
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 9b84b0c4e37..6a417092d01 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -8,6 +8,7 @@
#define PSMOUSE_CMD_SETSTREAM 0x00ea
#define PSMOUSE_CMD_SETPOLL 0x00f0
#define PSMOUSE_CMD_POLL 0x00eb /* caller sets number of bytes to receive */
+#define PSMOUSE_CMD_RESET_WRAP 0x00ec
#define PSMOUSE_CMD_GETID 0x02f2
#define PSMOUSE_CMD_SETRATE 0x10f3
#define PSMOUSE_CMD_ENABLE 0x00f4
@@ -93,6 +94,7 @@ enum psmouse_type {
PSMOUSE_HGPK,
PSMOUSE_ELANTECH,
PSMOUSE_FSP,
+ PSMOUSE_SYNAPTICS_RELATIVE,
PSMOUSE_AUTO /* This one should always be last */
};
@@ -102,6 +104,7 @@ int psmouse_sliced_command(struct psmouse *psmouse, unsigned char command);
int psmouse_reset(struct psmouse *psmouse);
void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state);
void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution);
+psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse);
struct psmouse_attribute {
struct device_attribute dattr;
diff --git a/drivers/input/mouse/pxa930_trkball.c b/drivers/input/mouse/pxa930_trkball.c
index ee3b0ca9d59..a9e4bfdf31f 100644
--- a/drivers/input/mouse/pxa930_trkball.c
+++ b/drivers/input/mouse/pxa930_trkball.c
@@ -250,19 +250,7 @@ static struct platform_driver pxa930_trkball_driver = {
.probe = pxa930_trkball_probe,
.remove = __devexit_p(pxa930_trkball_remove),
};
-
-static int __init pxa930_trkball_init(void)
-{
- return platform_driver_register(&pxa930_trkball_driver);
-}
-
-static void __exit pxa930_trkball_exit(void)
-{
- platform_driver_unregister(&pxa930_trkball_driver);
-}
-
-module_init(pxa930_trkball_init);
-module_exit(pxa930_trkball_exit);
+module_platform_driver(pxa930_trkball_driver);
MODULE_AUTHOR("Yong Yao <yaoyong@marvell.com>");
MODULE_DESCRIPTION("PXA930 Trackball Mouse Driver");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 86d6f39178b..e36847de761 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -408,7 +408,7 @@ static int fsp_onpad_hscr(struct psmouse *psmouse, bool enable)
static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
- unsigned long reg, val;
+ int reg, val;
char *rest;
ssize_t retval;
@@ -416,7 +416,11 @@ static ssize_t fsp_attr_set_setreg(struct psmouse *psmouse, void *data,
if (rest == buf || *rest != ' ' || reg > 0xff)
return -EINVAL;
- if (strict_strtoul(rest + 1, 16, &val) || val > 0xff)
+ retval = kstrtoint(rest + 1, 16, &val);
+ if (retval)
+ return retval;
+
+ if (val > 0xff)
return -EINVAL;
if (fsp_reg_write_enable(psmouse, true))
@@ -448,10 +452,13 @@ static ssize_t fsp_attr_set_getreg(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
struct fsp_data *pad = psmouse->private;
- unsigned long reg;
- int val;
+ int reg, val, err;
+
+ err = kstrtoint(buf, 16, &reg);
+ if (err)
+ return err;
- if (strict_strtoul(buf, 16, &reg) || reg > 0xff)
+ if (reg > 0xff)
return -EINVAL;
if (fsp_reg_read(psmouse, reg, &val))
@@ -480,9 +487,13 @@ static ssize_t fsp_attr_show_pagereg(struct psmouse *psmouse,
static ssize_t fsp_attr_set_pagereg(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
- unsigned long val;
+ int val, err;
- if (strict_strtoul(buf, 16, &val) || val > 0xff)
+ err = kstrtoint(buf, 16, &val);
+ if (err)
+ return err;
+
+ if (val > 0xff)
return -EINVAL;
if (fsp_page_reg_write(psmouse, val))
@@ -505,9 +516,14 @@ static ssize_t fsp_attr_show_vscroll(struct psmouse *psmouse,
static ssize_t fsp_attr_set_vscroll(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
- unsigned long val;
+ unsigned int val;
+ int err;
+
+ err = kstrtouint(buf, 10, &val);
+ if (err)
+ return err;
- if (strict_strtoul(buf, 10, &val) || val > 1)
+ if (val > 1)
return -EINVAL;
fsp_onpad_vscr(psmouse, val);
@@ -529,9 +545,14 @@ static ssize_t fsp_attr_show_hscroll(struct psmouse *psmouse,
static ssize_t fsp_attr_set_hscroll(struct psmouse *psmouse, void *data,
const char *buf, size_t count)
{
- unsigned long val;
+ unsigned int val;
+ int err;
+
+ err = kstrtouint(buf, 10, &val);
+ if (err)
+ return err;
- if (strict_strtoul(buf, 10, &val) || val > 1)
+ if (val > 1)
return -EINVAL;
fsp_onpad_hscr(psmouse, val);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index a6dcd18e9ad..8081a0a5d60 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -269,19 +269,49 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
return 0;
}
-static int synaptics_set_absolute_mode(struct psmouse *psmouse)
+static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
+{
+ static unsigned char param = 0xc8;
+ struct synaptics_data *priv = psmouse->private;
+
+ if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+ return 0;
+
+ if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
+ return -1;
+
+ if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
+ return -1;
+
+ /* Advanced gesture mode also sends multi finger data */
+ priv->capabilities |= BIT(1);
+
+ return 0;
+}
+
+static int synaptics_set_mode(struct psmouse *psmouse)
{
struct synaptics_data *priv = psmouse->private;
- priv->mode = SYN_BIT_ABSOLUTE_MODE;
- if (SYN_ID_MAJOR(priv->identity) >= 4)
+ priv->mode = 0;
+ if (priv->absolute_mode)
+ priv->mode |= SYN_BIT_ABSOLUTE_MODE;
+ if (priv->disable_gesture)
priv->mode |= SYN_BIT_DISABLE_GESTURE;
+ if (psmouse->rate >= 80)
+ priv->mode |= SYN_BIT_HIGH_RATE;
if (SYN_CAP_EXTENDED(priv->capabilities))
priv->mode |= SYN_BIT_W_MODE;
if (synaptics_mode_cmd(psmouse, priv->mode))
return -1;
+ if (priv->absolute_mode &&
+ synaptics_set_advanced_gesture_mode(psmouse)) {
+ psmouse_err(psmouse, "Advanced gesture mode init failed.\n");
+ return -1;
+ }
+
return 0;
}
@@ -300,26 +330,6 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
synaptics_mode_cmd(psmouse, priv->mode);
}
-static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
-{
- static unsigned char param = 0xc8;
- struct synaptics_data *priv = psmouse->private;
-
- if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
- SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)))
- return 0;
-
- if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
- return -1;
- if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
- return -1;
-
- /* Advanced gesture mode also sends multi finger data */
- priv->capabilities |= BIT(1);
-
- return 0;
-}
-
/*****************************************************************************
* Synaptics pass-through PS/2 port support
****************************************************************************/
@@ -1143,8 +1153,24 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
{
int i;
+ /* Things that apply to both modes */
__set_bit(INPUT_PROP_POINTER, dev->propbit);
+ __set_bit(EV_KEY, dev->evbit);
+ __set_bit(BTN_LEFT, dev->keybit);
+ __set_bit(BTN_RIGHT, dev->keybit);
+ if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
+ __set_bit(BTN_MIDDLE, dev->keybit);
+
+ if (!priv->absolute_mode) {
+ /* Relative mode */
+ __set_bit(EV_REL, dev->evbit);
+ __set_bit(REL_X, dev->relbit);
+ __set_bit(REL_Y, dev->relbit);
+ return;
+ }
+
+ /* Absolute mode */
__set_bit(EV_ABS, dev->evbit);
set_abs_position_params(dev, priv, ABS_X, ABS_Y);
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
@@ -1170,20 +1196,14 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
if (SYN_CAP_PALMDETECT(priv->capabilities))
input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
- __set_bit(EV_KEY, dev->evbit);
__set_bit(BTN_TOUCH, dev->keybit);
__set_bit(BTN_TOOL_FINGER, dev->keybit);
- __set_bit(BTN_LEFT, dev->keybit);
- __set_bit(BTN_RIGHT, dev->keybit);
if (SYN_CAP_MULTIFINGER(priv->capabilities)) {
__set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, dev->keybit);
}
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities))
- __set_bit(BTN_MIDDLE, dev->keybit);
-
if (SYN_CAP_FOUR_BUTTON(priv->capabilities) ||
SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
__set_bit(BTN_FORWARD, dev->keybit);
@@ -1205,10 +1225,58 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
}
}
+static ssize_t synaptics_show_disable_gesture(struct psmouse *psmouse,
+ void *data, char *buf)
+{
+ struct synaptics_data *priv = psmouse->private;
+
+ return sprintf(buf, "%c\n", priv->disable_gesture ? '1' : '0');
+}
+
+static ssize_t synaptics_set_disable_gesture(struct psmouse *psmouse,
+ void *data, const char *buf,
+ size_t len)
+{
+ struct synaptics_data *priv = psmouse->private;
+ unsigned int value;
+ int err;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
+
+ if (value > 1)
+ return -EINVAL;
+
+ if (value == priv->disable_gesture)
+ return len;
+
+ priv->disable_gesture = value;
+ if (value)
+ priv->mode |= SYN_BIT_DISABLE_GESTURE;
+ else
+ priv->mode &= ~SYN_BIT_DISABLE_GESTURE;
+
+ if (synaptics_mode_cmd(psmouse, priv->mode))
+ return -EIO;
+
+ return len;
+}
+
+PSMOUSE_DEFINE_ATTR(disable_gesture, S_IWUSR | S_IRUGO, NULL,
+ synaptics_show_disable_gesture,
+ synaptics_set_disable_gesture);
+
static void synaptics_disconnect(struct psmouse *psmouse)
{
+ struct synaptics_data *priv = psmouse->private;
+
+ if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity))
+ device_remove_file(&psmouse->ps2dev.serio->dev,
+ &psmouse_attr_disable_gesture.dattr);
+
synaptics_reset(psmouse);
- kfree(psmouse->private);
+ kfree(priv);
psmouse->private = NULL;
}
@@ -1245,17 +1313,11 @@ static int synaptics_reconnect(struct psmouse *psmouse)
return -1;
}
- if (synaptics_set_absolute_mode(psmouse)) {
+ if (synaptics_set_mode(psmouse)) {
psmouse_err(psmouse, "Unable to initialize device.\n");
return -1;
}
- if (synaptics_set_advanced_gesture_mode(psmouse)) {
- psmouse_err(psmouse,
- "Advanced gesture mode reconnect failed.\n");
- return -1;
- }
-
if (old_priv.identity != priv->identity ||
old_priv.model_id != priv->model_id ||
old_priv.capabilities != priv->capabilities ||
@@ -1332,20 +1394,18 @@ void __init synaptics_module_init(void)
broken_olpc_ec = dmi_check_system(olpc_dmi_table);
}
-int synaptics_init(struct psmouse *psmouse)
+static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
{
struct synaptics_data *priv;
+ int err = -1;
/*
- * The OLPC XO has issues with Synaptics' absolute mode; similarly to
- * the HGPK, it quickly degrades and the hardware becomes jumpy and
- * overly sensitive. Not only that, but the constant packet spew
- * (even at a lowered 40pps rate) overloads the EC such that key
- * presses on the keyboard are missed. Given all of that, don't
- * even attempt to use Synaptics mode. Relative mode seems to work
- * just fine.
+ * The OLPC XO has issues with Synaptics' absolute mode; the constant
+ * packet spew overloads the EC such that key presses on the keyboard
+ * are missed. Given that, don't even attempt to use Absolute mode.
+ * Relative mode seems to work just fine.
*/
- if (broken_olpc_ec) {
+ if (absolute_mode && broken_olpc_ec) {
psmouse_info(psmouse,
"OLPC XO detected, not enabling Synaptics protocol.\n");
return -ENODEV;
@@ -1362,13 +1422,12 @@ int synaptics_init(struct psmouse *psmouse)
goto init_fail;
}
- if (synaptics_set_absolute_mode(psmouse)) {
- psmouse_err(psmouse, "Unable to initialize device.\n");
- goto init_fail;
- }
+ priv->absolute_mode = absolute_mode;
+ if (SYN_ID_DISGEST_SUPPORTED(priv->identity))
+ priv->disable_gesture = true;
- if (synaptics_set_advanced_gesture_mode(psmouse)) {
- psmouse_err(psmouse, "Advanced gesture mode init failed.\n");
+ if (synaptics_set_mode(psmouse)) {
+ psmouse_err(psmouse, "Unable to initialize device.\n");
goto init_fail;
}
@@ -1393,12 +1452,19 @@ int synaptics_init(struct psmouse *psmouse)
psmouse->model = ((priv->model_id & 0x00ff0000) >> 8) |
(priv->model_id & 0x000000ff);
- psmouse->protocol_handler = synaptics_process_byte;
+ if (absolute_mode) {
+ psmouse->protocol_handler = synaptics_process_byte;
+ psmouse->pktsize = 6;
+ } else {
+ /* Relative mode follows standard PS/2 mouse protocol */
+ psmouse->protocol_handler = psmouse_process_byte;
+ psmouse->pktsize = 3;
+ }
+
psmouse->set_rate = synaptics_set_rate;
psmouse->disconnect = synaptics_disconnect;
psmouse->reconnect = synaptics_reconnect;
psmouse->cleanup = synaptics_reset;
- psmouse->pktsize = 6;
/* Synaptics can usually stay in sync without extra help */
psmouse->resync_time = 0;
@@ -1417,11 +1483,32 @@ int synaptics_init(struct psmouse *psmouse)
psmouse->rate = 40;
}
+ if (!priv->absolute_mode && SYN_ID_DISGEST_SUPPORTED(priv->identity)) {
+ err = device_create_file(&psmouse->ps2dev.serio->dev,
+ &psmouse_attr_disable_gesture.dattr);
+ if (err) {
+ psmouse_err(psmouse,
+ "Failed to create disable_gesture attribute (%d)",
+ err);
+ goto init_fail;
+ }
+ }
+
return 0;
init_fail:
kfree(priv);
- return -1;
+ return err;
+}
+
+int synaptics_init(struct psmouse *psmouse)
+{
+ return __synaptics_init(psmouse, true);
+}
+
+int synaptics_init_relative(struct psmouse *psmouse)
+{
+ return __synaptics_init(psmouse, false);
}
bool synaptics_supported(void)
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 622aea8dd7e..fd26ccca13d 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -100,6 +100,7 @@
#define SYN_ID_MINOR(i) (((i) >> 16) & 0xff)
#define SYN_ID_FULL(i) ((SYN_ID_MAJOR(i) << 8) | SYN_ID_MINOR(i))
#define SYN_ID_IS_SYNAPTICS(i) ((((i) >> 8) & 0xff) == 0x47)
+#define SYN_ID_DISGEST_SUPPORTED(i) (SYN_ID_MAJOR(i) >= 4)
/* synaptics special commands */
#define SYN_PS_SET_MODE2 0x14
@@ -159,6 +160,9 @@ struct synaptics_data {
unsigned char mode; /* current mode byte */
int scroll;
+ bool absolute_mode; /* run in Absolute mode */
+ bool disable_gesture; /* disable gestures */
+
struct serio *pt_port; /* Pass-through serio port */
struct synaptics_mt_state mt_state; /* Current mt finger state */
@@ -175,6 +179,7 @@ struct synaptics_data {
void synaptics_module_init(void);
int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
+int synaptics_init_relative(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
bool synaptics_supported(void);
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 54b2fa892e1..22b21801813 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -89,10 +89,12 @@ static ssize_t trackpoint_set_int_attr(struct psmouse *psmouse, void *data,
struct trackpoint_data *tp = psmouse->private;
struct trackpoint_attr_data *attr = data;
unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset);
- unsigned long value;
+ unsigned char value;
+ int err;
- if (strict_strtoul(buf, 10, &value) || value > 255)
- return -EINVAL;
+ err = kstrtou8(buf, 10, &value);
+ if (err)
+ return err;
*field = value;
trackpoint_write(&psmouse->ps2dev, attr->command, value);
@@ -115,9 +117,14 @@ static ssize_t trackpoint_set_bit_attr(struct psmouse *psmouse, void *data,
struct trackpoint_data *tp = psmouse->private;
struct trackpoint_attr_data *attr = data;
unsigned char *field = (unsigned char *)((char *)tp + attr->field_offset);
- unsigned long value;
+ unsigned int value;
+ int err;
+
+ err = kstrtouint(buf, 10, &value);
+ if (err)
+ return err;
- if (strict_strtoul(buf, 10, &value) || value > 1)
+ if (value > 1)
return -EINVAL;
if (attr->inverted)
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
index d363dc4571a..35864c6130b 100644
--- a/drivers/input/serio/altera_ps2.c
+++ b/drivers/input/serio/altera_ps2.c
@@ -196,18 +196,7 @@ static struct platform_driver altera_ps2_driver = {
.of_match_table = altera_ps2_match,
},
};
-
-static int __init altera_ps2_init(void)
-{
- return platform_driver_register(&altera_ps2_driver);
-}
-module_init(altera_ps2_init);
-
-static void __exit altera_ps2_exit(void)
-{
- platform_driver_unregister(&altera_ps2_driver);
-}
-module_exit(altera_ps2_exit);
+module_platform_driver(altera_ps2_driver);
MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c
index 95280f9207e..421a7442e46 100644
--- a/drivers/input/serio/at32psif.c
+++ b/drivers/input/serio/at32psif.c
@@ -358,19 +358,7 @@ static struct platform_driver psif_driver = {
.suspend = psif_suspend,
.resume = psif_resume,
};
-
-static int __init psif_init(void)
-{
- return platform_driver_probe(&psif_driver, psif_probe);
-}
-
-static void __exit psif_exit(void)
-{
- platform_driver_unregister(&psif_driver);
-}
-
-module_init(psif_init);
-module_exit(psif_exit);
+module_platform_driver(psif_driver);
MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("Atmel AVR32 PSIF PS/2 driver");
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d37a48e099d..86564414b75 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -991,7 +991,7 @@ static int i8042_controller_init(void)
* Reset the controller and reset CRT to the original value set by BIOS.
*/
-static void i8042_controller_reset(void)
+static void i8042_controller_reset(bool force_reset)
{
i8042_flush();
@@ -1016,7 +1016,7 @@ static void i8042_controller_reset(void)
* Reset the controller if requested.
*/
- if (i8042_reset)
+ if (i8042_reset || force_reset)
i8042_controller_selftest();
/*
@@ -1139,9 +1139,9 @@ static int i8042_controller_resume(bool force_reset)
* upsetting it.
*/
-static int i8042_pm_reset(struct device *dev)
+static int i8042_pm_suspend(struct device *dev)
{
- i8042_controller_reset();
+ i8042_controller_reset(true);
return 0;
}
@@ -1163,13 +1163,20 @@ static int i8042_pm_thaw(struct device *dev)
return 0;
}
+static int i8042_pm_reset(struct device *dev)
+{
+ i8042_controller_reset(false);
+
+ return 0;
+}
+
static int i8042_pm_restore(struct device *dev)
{
return i8042_controller_resume(false);
}
static const struct dev_pm_ops i8042_pm_ops = {
- .suspend = i8042_pm_reset,
+ .suspend = i8042_pm_suspend,
.resume = i8042_pm_resume,
.thaw = i8042_pm_thaw,
.poweroff = i8042_pm_reset,
@@ -1185,7 +1192,7 @@ static const struct dev_pm_ops i8042_pm_ops = {
static void i8042_shutdown(struct platform_device *dev)
{
- i8042_controller_reset();
+ i8042_controller_reset(false);
}
static int __init i8042_create_kbd_port(void)
@@ -1424,7 +1431,7 @@ static int __init i8042_probe(struct platform_device *dev)
out_fail:
i8042_free_aux_ports(); /* in case KBD failed but AUX not */
i8042_free_irqs();
- i8042_controller_reset();
+ i8042_controller_reset(false);
i8042_platform_device = NULL;
return error;
@@ -1434,7 +1441,7 @@ static int __devexit i8042_remove(struct platform_device *dev)
{
i8042_unregister_ports();
i8042_free_irqs();
- i8042_controller_reset();
+ i8042_controller_reset(false);
i8042_platform_device = NULL;
return 0;
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 7ec3c97dc1b..8b44ddc8041 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -143,16 +143,4 @@ static struct platform_driver rpckbd_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init rpckbd_init(void)
-{
- return platform_driver_register(&rpckbd_driver);
-}
-
-static void __exit rpckbd_exit(void)
-{
- platform_driver_unregister(&rpckbd_driver);
-}
-
-module_init(rpckbd_init);
-module_exit(rpckbd_exit);
+module_platform_driver(rpckbd_driver);
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index d64c5a43aaa..127c391dece 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -369,19 +369,7 @@ static struct platform_driver xps2_of_driver = {
.probe = xps2_of_probe,
.remove = __devexit_p(xps2_of_remove),
};
-
-static int __init xps2_init(void)
-{
- return platform_driver_register(&xps2_of_driver);
-}
-
-static void __exit xps2_cleanup(void)
-{
- platform_driver_unregister(&xps2_of_driver);
-}
-
-module_init(xps2_init);
-module_exit(xps2_cleanup);
+module_platform_driver(xps2_of_driver);
MODULE_AUTHOR("Xilinx, Inc.");
MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index d5ef3debd04..205d16aab44 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1198,9 +1198,9 @@ static ssize_t
store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- long x;
+ int x;
- if (strict_strtol(buf, 10, &x)) {
+ if (kstrtoint(buf, 10, &x)) {
size_t len = buf[count - 1] == '\n' ? count - 1 : count;
if (strncmp(buf, "disable", len))
@@ -1240,9 +1240,9 @@ static ssize_t
store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- long y;
+ int y;
- if (strict_strtol(buf, 10, &y)) {
+ if (kstrtoint(buf, 10, &y)) {
size_t len = buf[count - 1] == '\n' ? count - 1 : count;
if (strncmp(buf, "disable", len))
@@ -1277,12 +1277,13 @@ static ssize_t
store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- long j;
+ int err, j;
- if (strict_strtol(buf, 10, &j))
- return -EINVAL;
+ err = kstrtoint(buf, 10, &j);
+ if (err)
+ return err;
- aiptek->newSetting.jitterDelay = (int)j;
+ aiptek->newSetting.jitterDelay = j;
return count;
}
@@ -1306,12 +1307,13 @@ static ssize_t
store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- long d;
+ int err, d;
- if (strict_strtol(buf, 10, &d))
- return -EINVAL;
+ err = kstrtoint(buf, 10, &d);
+ if (err)
+ return err;
- aiptek->newSetting.programmableDelay = (int)d;
+ aiptek->newSetting.programmableDelay = d;
return count;
}
@@ -1557,11 +1559,13 @@ static ssize_t
store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct aiptek *aiptek = dev_get_drvdata(dev);
- long w;
+ int err, w;
- if (strict_strtol(buf, 10, &w)) return -EINVAL;
+ err = kstrtoint(buf, 10, &w);
+ if (err)
+ return err;
- aiptek->newSetting.wheel = (int)w;
+ aiptek->newSetting.wheel = w;
return count;
}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 8f9cde3e0ec..2a97b7e76db 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -28,7 +28,9 @@
#define HID_USAGE_Y_TILT 0x3e
#define HID_USAGE_FINGER 0x22
#define HID_USAGE_STYLUS 0x20
-#define HID_COLLECTION 0xc0
+#define HID_COLLECTION 0xa1
+#define HID_COLLECTION_LOGICAL 0x02
+#define HID_COLLECTION_END 0xc0
enum {
WCM_UNDEFINED = 0,
@@ -66,7 +68,8 @@ static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id,
do {
retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_REPORT,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ USB_DIR_IN | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE,
(type << 8) + id,
intf->altsetting[0].desc.bInterfaceNumber,
buf, size, 100);
@@ -164,7 +167,70 @@ static void wacom_close(struct input_dev *dev)
usb_autopm_put_interface(wacom->intf);
}
-static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+static int wacom_parse_logical_collection(unsigned char *report,
+ struct wacom_features *features)
+{
+ int length = 0;
+
+ if (features->type == BAMBOO_PT) {
+
+ /* Logical collection is only used by 3rd gen Bamboo Touch */
+ features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+ features->device_type = BTN_TOOL_DOUBLETAP;
+
+ /*
+ * Stylus and Touch have same active area
+ * so compute physical size based on stylus
+ * data before its overwritten.
+ */
+ features->x_phy =
+ (features->x_max * features->x_resolution) / 100;
+ features->y_phy =
+ (features->y_max * features->y_resolution) / 100;
+
+ features->x_max = features->y_max =
+ get_unaligned_le16(&report[10]);
+
+ length = 11;
+ }
+ return length;
+}
+
+/*
+ * Interface Descriptor of wacom devices can be incomplete and
+ * inconsistent so wacom_features table is used to store stylus
+ * device's packet lengths, various maximum values, and tablet
+ * resolution based on product ID's.
+ *
+ * For devices that contain 2 interfaces, wacom_features table is
+ * inaccurate for the touch interface. Since the Interface Descriptor
+ * for touch interfaces has pretty complete data, this function exists
+ * to query tablet for this missing information instead of hard coding in
+ * an additional table.
+ *
+ * A typical Interface Descriptor for a stylus will contain a
+ * boot mouse application collection that is not of interest and this
+ * function will ignore it.
+ *
+ * It also contains a digitizer application collection that also is not
+ * of interest since any information it contains would be duplicate
+ * of what is in wacom_features. Usually it defines a report of an array
+ * of bytes that could be used as max length of the stylus packet returned.
+ * If it happens to define a Digitizer-Stylus Physical Collection then
+ * the X and Y logical values contain valid data but it is ignored.
+ *
+ * A typical Interface Descriptor for a touch interface will contain a
+ * Digitizer-Finger Physical Collection which will define both logical
+ * X/Y maximum as well as the physical size of tablet. Since touch
+ * interfaces haven't supported pressure or distance, this is enough
+ * information to override invalid values in the wacom_features table.
+ *
+ * 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
+ * Collection. Instead they define a Logical Collection with a single
+ * Logical Maximum for both X and Y.
+ */
+static int wacom_parse_hid(struct usb_interface *intf,
+ struct hid_descriptor *hid_desc,
struct wacom_features *features)
{
struct usb_device *dev = interface_to_usbdev(intf);
@@ -244,8 +310,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
- if (features->type == BAMBOO_PT)
- features->pktlen = WACOM_PKGLEN_BBFUN;
features->device_type = BTN_TOOL_PEN;
features->x_max =
get_unaligned_le16(&report[i + 3]);
@@ -287,8 +351,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
- if (features->type == BAMBOO_PT)
- features->pktlen = WACOM_PKGLEN_BBFUN;
features->device_type = BTN_TOOL_PEN;
features->y_max =
get_unaligned_le16(&report[i + 3]);
@@ -302,6 +364,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
i++;
break;
+ /*
+ * Requiring Stylus Usage will ignore boot mouse
+ * X/Y values and some cases of invalid Digitizer X/Y
+ * values commonly reported.
+ */
case HID_USAGE_STYLUS:
pen = 1;
i++;
@@ -309,10 +376,20 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
}
break;
- case HID_COLLECTION:
+ case HID_COLLECTION_END:
/* reset UsagePage and Finger */
finger = usage = 0;
break;
+
+ case HID_COLLECTION:
+ i++;
+ switch (report[i]) {
+ case HID_COLLECTION_LOGICAL:
+ i += wacom_parse_logical_collection(&report[i],
+ features);
+ break;
+ }
+ break;
}
}
@@ -348,7 +425,8 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
WAC_HID_FEATURE_REPORT,
report_id, rep_data, 4, 1);
} while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
- } else if (features->type != TABLETPC) {
+ } else if (features->type != TABLETPC &&
+ features->device_type == BTN_TOOL_PEN) {
do {
rep_data[0] = 2;
rep_data[1] = 2;
@@ -485,7 +563,8 @@ static int wacom_led_control(struct wacom *wacom)
if (!buf)
return -ENOMEM;
- if (wacom->wacom_wac.features.type == WACOM_21UX2)
+ if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
+ wacom->wacom_wac.features.type == WACOM_24HD)
led = (wacom->led.select[1] << 4) | 0x40;
led |= wacom->led.select[0] | 0x4;
@@ -704,6 +783,7 @@ static int wacom_initialize_leds(struct wacom *wacom)
&intuos4_led_attr_group);
break;
+ case WACOM_24HD:
case WACOM_21UX2:
wacom->led.select[0] = 0;
wacom->led.select[1] = 0;
@@ -738,6 +818,7 @@ static void wacom_destroy_leds(struct wacom *wacom)
&intuos4_led_attr_group);
break;
+ case WACOM_24HD:
case WACOM_21UX2:
sysfs_remove_group(&wacom->intf->dev.kobj,
&cintiq_led_attr_group);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 2ee47d01a3b..88672ec296c 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -452,7 +452,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
- features->type == WACOM_21UX2) {
+ features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
@@ -519,6 +519,56 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
+ } else if (features->type == WACOM_24HD) {
+ input_report_key(input, BTN_0, (data[6] & 0x01));
+ input_report_key(input, BTN_1, (data[6] & 0x02));
+ input_report_key(input, BTN_2, (data[6] & 0x04));
+ input_report_key(input, BTN_3, (data[6] & 0x08));
+ input_report_key(input, BTN_4, (data[6] & 0x10));
+ input_report_key(input, BTN_5, (data[6] & 0x20));
+ input_report_key(input, BTN_6, (data[6] & 0x40));
+ input_report_key(input, BTN_7, (data[6] & 0x80));
+ input_report_key(input, BTN_8, (data[8] & 0x01));
+ input_report_key(input, BTN_9, (data[8] & 0x02));
+ input_report_key(input, BTN_A, (data[8] & 0x04));
+ input_report_key(input, BTN_B, (data[8] & 0x08));
+ input_report_key(input, BTN_C, (data[8] & 0x10));
+ input_report_key(input, BTN_X, (data[8] & 0x20));
+ input_report_key(input, BTN_Y, (data[8] & 0x40));
+ input_report_key(input, BTN_Z, (data[8] & 0x80));
+
+ /*
+ * Three "buttons" are available on the 24HD which are
+ * physically implemented as a touchstrip. Each button
+ * is approximately 3 bits wide with a 2 bit spacing.
+ * The raw touchstrip bits are stored at:
+ * ((data[3] & 0x1f) << 8) | data[4])
+ */
+ input_report_key(input, KEY_PROG1, data[4] & 0x07);
+ input_report_key(input, KEY_PROG2, data[4] & 0xE0);
+ input_report_key(input, KEY_PROG3, data[3] & 0x1C);
+
+ if (data[1] & 0x80) {
+ input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f));
+ } else {
+ /* Out of proximity, clear wheel value. */
+ input_report_abs(input, ABS_WHEEL, 0);
+ }
+
+ if (data[2] & 0x80) {
+ input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f));
+ } else {
+ /* Out of proximity, clear second wheel value. */
+ input_report_abs(input, ABS_THROTTLE, 0);
+ }
+
+ if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) {
+ input_report_key(input, wacom->tool[1], 1);
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_key(input, wacom->tool[1], 0);
+ input_report_abs(input, ABS_MISC, 0);
+ }
} else {
if (features->type == WACOM_21UX2) {
input_report_key(input, BTN_0, (data[5] & 0x01));
@@ -799,6 +849,9 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
unsigned char *data = wacom->data;
int i;
+ if (data[0] != 0x02)
+ return 0;
+
for (i = 0; i < 2; i++) {
int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
bool touch = data[offset + 3] & 0x80;
@@ -837,18 +890,77 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
return 0;
}
+static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
+{
+ struct input_dev *input = wacom->input;
+ int slot_id = data[0] - 2; /* data[0] is between 2 and 17 */
+ bool touch = data[1] & 0x80;
+
+ touch = touch && !wacom->shared->stylus_in_proximity;
+
+ input_mt_slot(input, slot_id);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+
+ if (touch) {
+ int x = (data[2] << 4) | (data[4] >> 4);
+ int y = (data[3] << 4) | (data[4] & 0x0f);
+ int w = data[6];
+
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+ }
+}
+
+static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
+{
+ struct input_dev *input = wacom->input;
+
+ input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
+ input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
+ input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
+ input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
+}
+
+static int wacom_bpt3_touch(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int count = data[1] & 0x03;
+ int i;
+
+ if (data[0] != 0x02)
+ return 0;
+
+ /* data has up to 7 fixed sized 8-byte messages starting at data[2] */
+ for (i = 0; i < count; i++) {
+ int offset = (8 * i) + 2;
+ int msg_id = data[offset];
+
+ if (msg_id >= 2 && msg_id <= 17)
+ wacom_bpt3_touch_msg(wacom, data + offset);
+ else if (msg_id == 128)
+ wacom_bpt3_button_msg(wacom, data + offset);
+
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+
+ input_sync(input);
+
+ return 0;
+}
+
static int wacom_bpt_pen(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
unsigned char *data = wacom->data;
int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
- /*
- * Similar to Graphire protocol, data[1] & 0x20 is proximity and
- * data[1] & 0x18 is tool ID. 0x30 is safety check to ignore
- * 2 unused tool ID's.
- */
- prox = (data[1] & 0x30) == 0x30;
+ if (data[0] != 0x02)
+ return 0;
+
+ prox = (data[1] & 0x20) == 0x20;
/*
* All reports shared between PEN and RUBBER tool must be
@@ -912,7 +1024,9 @@ static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
{
if (len == WACOM_PKGLEN_BBTOUCH)
return wacom_bpt_touch(wacom);
- else if (len == WACOM_PKGLEN_BBFUN)
+ else if (len == WACOM_PKGLEN_BBTOUCH3)
+ return wacom_bpt3_touch(wacom);
+ else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
return wacom_bpt_pen(wacom);
return 0;
@@ -955,6 +1069,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
case CINTIQ:
case WACOM_BEE:
case WACOM_21UX2:
+ case WACOM_24HD:
sync = wacom_intuos_irq(wacom_wac);
break;
@@ -1031,9 +1146,9 @@ void wacom_setup_device_quirks(struct wacom_features *features)
features->type == BAMBOO_PT)
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
- /* quirks for bamboo touch */
+ /* quirk for bamboo touch with 2 low res touches */
if (features->type == BAMBOO_PT &&
- features->device_type == BTN_TOOL_DOUBLETAP) {
+ features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->x_max <<= 5;
features->y_max <<= 5;
features->x_fuzz <<= 5;
@@ -1110,6 +1225,26 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
+ case WACOM_24HD:
+ __set_bit(BTN_A, input_dev->keybit);
+ __set_bit(BTN_B, input_dev->keybit);
+ __set_bit(BTN_C, input_dev->keybit);
+ __set_bit(BTN_X, input_dev->keybit);
+ __set_bit(BTN_Y, input_dev->keybit);
+ __set_bit(BTN_Z, input_dev->keybit);
+
+ for (i = 0; i < 10; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ __set_bit(KEY_PROG1, input_dev->keybit);
+ __set_bit(KEY_PROG2, input_dev->keybit);
+ __set_bit(KEY_PROG3, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+ input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
+ wacom_setup_cintiq(wacom_wac);
+ break;
+
case WACOM_21UX2:
__set_bit(BTN_A, input_dev->keybit);
__set_bit(BTN_B, input_dev->keybit);
@@ -1240,7 +1375,21 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
- input_mt_init_slots(input_dev, 2);
+ if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
+ __set_bit(BTN_TOOL_TRIPLETAP,
+ input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP,
+ input_dev->keybit);
+
+ input_mt_init_slots(input_dev, 16);
+
+ input_set_abs_params(input_dev,
+ ABS_MT_TOUCH_MAJOR,
+ 0, 255, 0, 0);
+ } else {
+ input_mt_init_slots(input_dev, 2);
+ }
+
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, features->x_max,
features->x_fuzz, 0);
@@ -1425,6 +1574,9 @@ static const struct wacom_features wacom_features_0xBB =
static const struct wacom_features wacom_features_0xBC =
{ "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047,
63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xF4 =
+ { "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
+ 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", WACOM_PKGLEN_INTUOS, 87200, 65600, 1023,
63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -1509,6 +1661,15 @@ static const struct wacom_features wacom_features_0xDA =
static struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDD =
+ { "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDE =
+ { "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xDF =
+ { "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023,
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1604,6 +1765,9 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
+ { USB_DEVICE_WACOM(0xDD) },
+ { USB_DEVICE_WACOM(0xDE) },
+ { USB_DEVICE_WACOM(0xDF) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
@@ -1616,6 +1780,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xE6) },
{ USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0x47) },
+ { USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }
};
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 53eb71b6833..050acaefee7 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -12,7 +12,7 @@
#include <linux/types.h>
/* maximum packet length for USB devices */
-#define WACOM_PKGLEN_MAX 32
+#define WACOM_PKGLEN_MAX 64
/* packet length for individual models */
#define WACOM_PKGLEN_PENPRTN 7
@@ -22,6 +22,8 @@
#define WACOM_PKGLEN_TPC1FG 5
#define WACOM_PKGLEN_TPC2FG 14
#define WACOM_PKGLEN_BBTOUCH 20
+#define WACOM_PKGLEN_BBTOUCH3 64
+#define WACOM_PKGLEN_BBPEN 10
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
@@ -57,6 +59,7 @@ enum {
INTUOS4S,
INTUOS4,
INTUOS4L,
+ WACOM_24HD,
WACOM_21UX2,
CINTIQ,
WACOM_BEE,
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
index b3aebc2166b..05f30b73c3c 100644
--- a/drivers/input/touchscreen/88pm860x-ts.c
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -217,18 +217,7 @@ static struct platform_driver pm860x_touch_driver = {
.probe = pm860x_touch_probe,
.remove = __devexit_p(pm860x_touch_remove),
};
-
-static int __init pm860x_touch_init(void)
-{
- return platform_driver_register(&pm860x_touch_driver);
-}
-module_init(pm860x_touch_init);
-
-static void __exit pm860x_touch_exit(void)
-{
- platform_driver_unregister(&pm860x_touch_driver);
-}
-module_exit(pm860x_touch_exit);
+module_platform_driver(pm860x_touch_driver);
MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x");
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 3488ffe1fa0..4af2a18eb3b 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -98,6 +98,19 @@ config TOUCHSCREEN_ATMEL_MXT
To compile this driver as a module, choose M here: the
module will be called atmel_mxt_ts.
+config TOUCHSCREEN_AUO_PIXCIR
+ tristate "AUO in-cell touchscreen using Pixcir ICs"
+ depends on I2C
+ depends on GPIOLIB
+ help
+ Say Y here if you have a AUO display with in-cell touchscreen
+ using Pixcir ICs.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called auo-pixcir-ts.
+
config TOUCHSCREEN_BITSY
tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
depends on SA1100_BITSY
@@ -177,6 +190,16 @@ config TOUCHSCREEN_EETI
To compile this driver as a module, choose M here: the
module will be called eeti_ts.
+config TOUCHSCREEN_EGALAX
+ tristate "EETI eGalax multi-touch panel support"
+ depends on I2C
+ help
+ Say Y here to enable support for I2C connected EETI
+ eGalax multi-touch panels.
+
+ To compile this driver as a module, choose M here: the
+ module will be called egalax_ts.
+
config TOUCHSCREEN_FUJITSU
tristate "Fujitsu serial touchscreen"
select SERIO
@@ -435,6 +458,18 @@ config TOUCHSCREEN_UCB1400
To compile this driver as a module, choose M here: the
module will be called ucb1400_ts.
+config TOUCHSCREEN_PIXCIR
+ tristate "PIXCIR I2C touchscreens"
+ depends on I2C
+ help
+ Say Y here if you have a pixcir i2c touchscreen
+ controller.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pixcir_i2c_ts.
+
config TOUCHSCREEN_WM831X
tristate "Support for WM831x touchscreen controllers"
depends on MFD_WM831X
@@ -541,6 +576,7 @@ config TOUCHSCREEN_USB_COMPOSITE
- GoTop Super_Q2/GogoPen/PenPower tablets
- JASTEC USB Touch Controller/DigiTech DTR-02U
- Zytronic controllers
+ - Elo TouchSystems 2700 IntelliTouch
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -620,6 +656,11 @@ config TOUCHSCREEN_USB_JASTEC
bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
+config TOUCHSCREEN_USB_ELO
+ default y
+ bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
config TOUCHSCREEN_USB_E2I
default y
bool "e2i Touchscreen controller (e.g. from Mimo 740)"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index f957676035a..496091e8846 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI) += ad7879-spi.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
+obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o
obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o
obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o
@@ -39,6 +41,7 @@ obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
+obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
index baa43df6502..49a36df0b75 100644
--- a/drivers/input/touchscreen/ad7877.c
+++ b/drivers/input/touchscreen/ad7877.c
@@ -488,10 +488,10 @@ static ssize_t ad7877_disable_store(struct device *dev,
const char *buf, size_t count)
{
struct ad7877 *ts = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -518,10 +518,10 @@ static ssize_t ad7877_dac_store(struct device *dev,
const char *buf, size_t count)
{
struct ad7877 *ts = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -548,10 +548,10 @@ static ssize_t ad7877_gpio3_store(struct device *dev,
const char *buf, size_t count)
{
struct ad7877 *ts = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -579,10 +579,10 @@ static ssize_t ad7877_gpio4_store(struct device *dev,
const char *buf, size_t count)
{
struct ad7877 *ts = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
@@ -853,7 +853,6 @@ static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);
static struct spi_driver ad7877_driver = {
.driver = {
.name = "ad7877",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.pm = &ad7877_pm,
},
diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
index c789b974c79..0dac6712f42 100644
--- a/drivers/input/touchscreen/ad7879-i2c.c
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -16,30 +16,6 @@
#define AD7879_DEVID 0x79 /* AD7879-1/AD7889-1 */
-#ifdef CONFIG_PM_SLEEP
-static int ad7879_i2c_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct ad7879 *ts = i2c_get_clientdata(client);
-
- ad7879_suspend(ts);
-
- return 0;
-}
-
-static int ad7879_i2c_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct ad7879 *ts = i2c_get_clientdata(client);
-
- ad7879_resume(ts);
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(ad7879_i2c_pm, ad7879_i2c_suspend, ad7879_i2c_resume);
-
/* All registers are word-sized.
* AD7879 uses a high-byte first convention.
*/
@@ -47,7 +23,7 @@ static int ad7879_i2c_read(struct device *dev, u8 reg)
{
struct i2c_client *client = to_i2c_client(dev);
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
}
static int ad7879_i2c_multi_read(struct device *dev,
@@ -68,7 +44,7 @@ static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val)
{
struct i2c_client *client = to_i2c_client(dev);
- return i2c_smbus_write_word_data(client, reg, swab16(val));
+ return i2c_smbus_write_word_swapped(client, reg, val);
}
static const struct ad7879_bus_ops ad7879_i2c_bus_ops = {
@@ -119,7 +95,7 @@ static struct i2c_driver ad7879_i2c_driver = {
.driver = {
.name = "ad7879",
.owner = THIS_MODULE,
- .pm = &ad7879_i2c_pm,
+ .pm = &ad7879_pm_ops,
},
.probe = ad7879_i2c_probe,
.remove = __devexit_p(ad7879_i2c_remove),
@@ -141,4 +117,3 @@ module_exit(ad7879_i2c_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("i2c:ad7879");
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
index b1643c8fa7c..9b2e1c2b197 100644
--- a/drivers/input/touchscreen/ad7879-spi.c
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -22,30 +22,6 @@
#define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
#define AD7879_READCMD(reg) (AD7879_CMD(reg) | AD7879_CMD_READ)
-#ifdef CONFIG_PM_SLEEP
-static int ad7879_spi_suspend(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct ad7879 *ts = spi_get_drvdata(spi);
-
- ad7879_suspend(ts);
-
- return 0;
-}
-
-static int ad7879_spi_resume(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct ad7879 *ts = spi_get_drvdata(spi);
-
- ad7879_resume(ts);
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(ad7879_spi_pm, ad7879_spi_suspend, ad7879_spi_resume);
-
/*
* ad7879_read/write are only used for initial setup and for sysfs controls.
* The main traffic is done in ad7879_collect().
@@ -174,9 +150,8 @@ static int __devexit ad7879_spi_remove(struct spi_device *spi)
static struct spi_driver ad7879_spi_driver = {
.driver = {
.name = "ad7879",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
- .pm = &ad7879_spi_pm,
+ .pm = &ad7879_pm_ops,
},
.probe = ad7879_spi_probe,
.remove = __devexit_p(ad7879_spi_remove),
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index 3b2e9ed2aee..e2482b40da5 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -281,8 +281,11 @@ static void ad7879_close(struct input_dev* input)
__ad7879_disable(ts);
}
-void ad7879_suspend(struct ad7879 *ts)
+#ifdef CONFIG_PM_SLEEP
+static int ad7879_suspend(struct device *dev)
{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
mutex_lock(&ts->input->mutex);
if (!ts->suspended && !ts->disabled && ts->input->users)
@@ -291,11 +294,14 @@ void ad7879_suspend(struct ad7879 *ts)
ts->suspended = true;
mutex_unlock(&ts->input->mutex);
+
+ return 0;
}
-EXPORT_SYMBOL(ad7879_suspend);
-void ad7879_resume(struct ad7879 *ts)
+static int ad7879_resume(struct device *dev)
{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
mutex_lock(&ts->input->mutex);
if (ts->suspended && !ts->disabled && ts->input->users)
@@ -304,8 +310,13 @@ void ad7879_resume(struct ad7879 *ts)
ts->suspended = false;
mutex_unlock(&ts->input->mutex);
+
+ return 0;
}
-EXPORT_SYMBOL(ad7879_resume);
+#endif
+
+SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume);
+EXPORT_SYMBOL(ad7879_pm_ops);
static void ad7879_toggle(struct ad7879 *ts, bool disable)
{
@@ -340,10 +351,10 @@ static ssize_t ad7879_disable_store(struct device *dev,
const char *buf, size_t count)
{
struct ad7879 *ts = dev_get_drvdata(dev);
- unsigned long val;
+ unsigned int val;
int error;
- error = strict_strtoul(buf, 10, &val);
+ error = kstrtouint(buf, 10, &val);
if (error)
return error;
diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h
index 6b45a27236c..6fd13c48d37 100644
--- a/drivers/input/touchscreen/ad7879.h
+++ b/drivers/input/touchscreen/ad7879.h
@@ -21,8 +21,8 @@ struct ad7879_bus_ops {
int (*write)(struct device *dev, u8 reg, u16 val);
};
-void ad7879_suspend(struct ad7879 *);
-void ad7879_resume(struct ad7879 *);
+extern const struct dev_pm_ops ad7879_pm_ops;
+
struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq,
const struct ad7879_bus_ops *bops);
void ad7879_remove(struct ad7879 *);
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index de31ec6fe9e..23fd9018565 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -602,10 +602,12 @@ static ssize_t ads7846_disable_store(struct device *dev,
const char *buf, size_t count)
{
struct ads7846 *ts = dev_get_drvdata(dev);
- unsigned long i;
+ unsigned int i;
+ int err;
- if (strict_strtoul(buf, 10, &i))
- return -EINVAL;
+ err = kstrtouint(buf, 10, &i);
+ if (err)
+ return err;
if (i)
ads7846_disable(ts);
@@ -1424,7 +1426,6 @@ static int __devexit ads7846_remove(struct spi_device *spi)
static struct spi_driver ads7846_driver = {
.driver = {
.name = "ads7846",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.pm = &ads7846_pm,
},
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 8034cbb20f7..d016cb26d12 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -429,18 +429,7 @@ static struct platform_driver atmel_wm97xx_driver = {
.suspend = atmel_wm97xx_suspend,
.resume = atmel_wm97xx_resume,
};
-
-static int __init atmel_wm97xx_init(void)
-{
- return platform_driver_probe(&atmel_wm97xx_driver, atmel_wm97xx_probe);
-}
-module_init(atmel_wm97xx_init);
-
-static void __exit atmel_wm97xx_exit(void)
-{
- platform_driver_unregister(&atmel_wm97xx_driver);
-}
-module_exit(atmel_wm97xx_exit);
+module_platform_driver(atmel_wm97xx_driver);
MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32");
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 122a8788365..201b2d2ec1b 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -351,20 +351,7 @@ static struct platform_driver atmel_tsadcc_driver = {
.name = "atmel_tsadcc",
},
};
-
-static int __init atmel_tsadcc_init(void)
-{
- return platform_driver_register(&atmel_tsadcc_driver);
-}
-
-static void __exit atmel_tsadcc_exit(void)
-{
- platform_driver_unregister(&atmel_tsadcc_driver);
-}
-
-module_init(atmel_tsadcc_init);
-module_exit(atmel_tsadcc_exit);
-
+module_platform_driver(atmel_tsadcc_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atmel TouchScreen Driver");
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
new file mode 100644
index 00000000000..94fb9fbb08a
--- /dev/null
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -0,0 +1,652 @@
+/*
+ * Driver for AUO in-cell touchscreens
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * loosely based on auo_touch.c from Dell Streak vendor-kernel
+ *
+ * Copyright (c) 2008 QUALCOMM Incorporated.
+ * Copyright (c) 2008 QUALCOMM USA, INC.
+ *
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input/auo-pixcir-ts.h>
+
+/*
+ * Coordinate calculation:
+ * X1 = X1_LSB + X1_MSB*256
+ * Y1 = Y1_LSB + Y1_MSB*256
+ * X2 = X2_LSB + X2_MSB*256
+ * Y2 = Y2_LSB + Y2_MSB*256
+ */
+#define AUO_PIXCIR_REG_X1_LSB 0x00
+#define AUO_PIXCIR_REG_X1_MSB 0x01
+#define AUO_PIXCIR_REG_Y1_LSB 0x02
+#define AUO_PIXCIR_REG_Y1_MSB 0x03
+#define AUO_PIXCIR_REG_X2_LSB 0x04
+#define AUO_PIXCIR_REG_X2_MSB 0x05
+#define AUO_PIXCIR_REG_Y2_LSB 0x06
+#define AUO_PIXCIR_REG_Y2_MSB 0x07
+
+#define AUO_PIXCIR_REG_STRENGTH 0x0d
+#define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e
+#define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f
+
+#define AUO_PIXCIR_REG_RAW_DATA_X 0x2b
+#define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f
+
+#define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f
+#define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70
+#define AUO_PIXCIR_REG_INT_SETTING 0x71
+#define AUO_PIXCIR_REG_INT_WIDTH 0x72
+#define AUO_PIXCIR_REG_POWER_MODE 0x73
+
+#define AUO_PIXCIR_REG_VERSION 0x77
+#define AUO_PIXCIR_REG_CALIBRATE 0x78
+
+#define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e
+#define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f
+#define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20
+#define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21
+
+#define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42
+#define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad
+
+#define AUO_PIXCIR_INT_TPNUM_MASK 0xe0
+#define AUO_PIXCIR_INT_TPNUM_SHIFT 5
+#define AUO_PIXCIR_INT_RELEASE (1 << 4)
+#define AUO_PIXCIR_INT_ENABLE (1 << 3)
+#define AUO_PIXCIR_INT_POL_HIGH (1 << 2)
+#define AUO_PIXCIR_INT_MODE_MASK 0x03
+
+/*
+ * Power modes:
+ * active: scan speed 60Hz
+ * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch
+ * deep sleep: scan speed 1Hz can only be entered or left manually.
+ */
+#define AUO_PIXCIR_POWER_ACTIVE 0x00
+#define AUO_PIXCIR_POWER_SLEEP 0x01
+#define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02
+#define AUO_PIXCIR_POWER_MASK 0x03
+
+#define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2)
+#define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4)
+
+#define AUO_PIXCIR_CALIBRATE 0x03
+
+#define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62
+#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36
+
+#define AUO_PIXCIR_RAW_DATA_X_LEN 18
+#define AUO_PIXCIR_RAW_DATA_Y_LEN 11
+
+#define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0)
+
+/* Touchscreen absolute values */
+#define AUO_PIXCIR_REPORT_POINTS 2
+#define AUO_PIXCIR_MAX_AREA 0xff
+#define AUO_PIXCIR_PENUP_TIMEOUT_MS 10
+
+struct auo_pixcir_ts {
+ struct i2c_client *client;
+ struct input_dev *input;
+ char phys[32];
+
+ /* special handling for touch_indicate interupt mode */
+ bool touch_ind_mode;
+
+ wait_queue_head_t wait;
+ bool stopped;
+};
+
+struct auo_point_t {
+ int coord_x;
+ int coord_y;
+ int area_major;
+ int area_minor;
+ int orientation;
+};
+
+static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts,
+ struct auo_point_t *point)
+{
+ struct i2c_client *client = ts->client;
+ const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
+ uint8_t raw_coord[8];
+ uint8_t raw_area[4];
+ int i, ret;
+
+ /* touch coordinates */
+ ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB,
+ 8, raw_coord);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to read coordinate, %d\n", ret);
+ return ret;
+ }
+
+ /* touch area */
+ ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1,
+ 4, raw_area);
+ if (ret < 0) {
+ dev_err(&client->dev, "could not read touch area, %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
+ point[i].coord_x =
+ raw_coord[4 * i + 1] << 8 | raw_coord[4 * i];
+ point[i].coord_y =
+ raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2];
+
+ if (point[i].coord_x > pdata->x_max ||
+ point[i].coord_y > pdata->y_max) {
+ dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
+ point[i].coord_x, point[i].coord_y);
+ point[i].coord_x = point[i].coord_y = 0;
+ }
+
+ /* determine touch major, minor and orientation */
+ point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]);
+ point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]);
+ point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1];
+ }
+
+ return 0;
+}
+
+static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id)
+{
+ struct auo_pixcir_ts *ts = dev_id;
+ struct i2c_client *client = ts->client;
+ const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
+ struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS];
+ int i;
+ int ret;
+ int fingers = 0;
+ int abs = -1;
+
+ while (!ts->stopped) {
+
+ /* check for up event in touch touch_ind_mode */
+ if (ts->touch_ind_mode) {
+ if (gpio_get_value(pdata->gpio_int) == 0) {
+ input_mt_sync(ts->input);
+ input_report_key(ts->input, BTN_TOUCH, 0);
+ input_sync(ts->input);
+ break;
+ }
+ }
+
+ ret = auo_pixcir_collect_data(ts, point);
+ if (ret < 0) {
+ /* we want to loop only in touch_ind_mode */
+ if (!ts->touch_ind_mode)
+ break;
+
+ wait_event_timeout(ts->wait, ts->stopped,
+ msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
+ continue;
+ }
+
+ for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
+ if (point[i].coord_x > 0 || point[i].coord_y > 0) {
+ input_report_abs(ts->input, ABS_MT_POSITION_X,
+ point[i].coord_x);
+ input_report_abs(ts->input, ABS_MT_POSITION_Y,
+ point[i].coord_y);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+ point[i].area_major);
+ input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+ point[i].area_minor);
+ input_report_abs(ts->input, ABS_MT_ORIENTATION,
+ point[i].orientation);
+ input_mt_sync(ts->input);
+
+ /* use first finger as source for singletouch */
+ if (fingers == 0)
+ abs = i;
+
+ /* number of touch points could also be queried
+ * via i2c but would require an additional call
+ */
+ fingers++;
+ }
+ }
+
+ input_report_key(ts->input, BTN_TOUCH, fingers > 0);
+
+ if (abs > -1) {
+ input_report_abs(ts->input, ABS_X, point[abs].coord_x);
+ input_report_abs(ts->input, ABS_Y, point[abs].coord_y);
+ }
+
+ input_sync(ts->input);
+
+ /* we want to loop only in touch_ind_mode */
+ if (!ts->touch_ind_mode)
+ break;
+
+ wait_event_timeout(ts->wait, ts->stopped,
+ msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set the power mode of the device.
+ * Valid modes are
+ * - AUO_PIXCIR_POWER_ACTIVE
+ * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch
+ * - AUO_PIXCIR_POWER_DEEP_SLEEP
+ */
+static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+ AUO_PIXCIR_REG_POWER_MODE, ret);
+ return ret;
+ }
+
+ ret &= ~AUO_PIXCIR_POWER_MASK;
+ ret |= mode;
+
+ ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret);
+ if (ret) {
+ dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+ AUO_PIXCIR_REG_POWER_MODE, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static __devinit int auo_pixcir_int_config(struct auo_pixcir_ts *ts,
+ int int_setting)
+{
+ struct i2c_client *client = ts->client;
+ struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+ AUO_PIXCIR_REG_INT_SETTING, ret);
+ return ret;
+ }
+
+ ret &= ~AUO_PIXCIR_INT_MODE_MASK;
+ ret |= int_setting;
+ ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */
+
+ ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
+ ret);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+ AUO_PIXCIR_REG_INT_SETTING, ret);
+ return ret;
+ }
+
+ ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND;
+
+ return 0;
+}
+
+/* control the generation of interrupts on the device side */
+static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+ AUO_PIXCIR_REG_INT_SETTING, ret);
+ return ret;
+ }
+
+ if (enable)
+ ret |= AUO_PIXCIR_INT_ENABLE;
+ else
+ ret &= ~AUO_PIXCIR_INT_ENABLE;
+
+ ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
+ ret);
+ if (ret < 0) {
+ dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+ AUO_PIXCIR_REG_INT_SETTING, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int auo_pixcir_start(struct auo_pixcir_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE);
+ if (ret < 0) {
+ dev_err(&client->dev, "could not set power mode, %d\n",
+ ret);
+ return ret;
+ }
+
+ ts->stopped = false;
+ mb();
+ enable_irq(client->irq);
+
+ ret = auo_pixcir_int_toggle(ts, 1);
+ if (ret < 0) {
+ dev_err(&client->dev, "could not enable interrupt, %d\n",
+ ret);
+ disable_irq(client->irq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int auo_pixcir_stop(struct auo_pixcir_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int ret;
+
+ ret = auo_pixcir_int_toggle(ts, 0);
+ if (ret < 0) {
+ dev_err(&client->dev, "could not disable interrupt, %d\n",
+ ret);
+ return ret;
+ }
+
+ /* disable receiving of interrupts */
+ disable_irq(client->irq);
+ ts->stopped = true;
+ mb();
+ wake_up(&ts->wait);
+
+ return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP);
+}
+
+static int auo_pixcir_input_open(struct input_dev *dev)
+{
+ struct auo_pixcir_ts *ts = input_get_drvdata(dev);
+ int ret;
+
+ ret = auo_pixcir_start(ts);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void auo_pixcir_input_close(struct input_dev *dev)
+{
+ struct auo_pixcir_ts *ts = input_get_drvdata(dev);
+
+ auo_pixcir_stop(ts);
+
+ return;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int auo_pixcir_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
+ struct input_dev *input = ts->input;
+ int ret = 0;
+
+ mutex_lock(&input->mutex);
+
+ /* when configured as wakeup source, device should always wake system
+ * therefore start device if necessary
+ */
+ if (device_may_wakeup(&client->dev)) {
+ /* need to start device if not open, to be wakeup source */
+ if (!input->users) {
+ ret = auo_pixcir_start(ts);
+ if (ret)
+ goto unlock;
+ }
+
+ enable_irq_wake(client->irq);
+ ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP);
+ } else if (input->users) {
+ ret = auo_pixcir_stop(ts);
+ }
+
+unlock:
+ mutex_unlock(&input->mutex);
+
+ return ret;
+}
+
+static int auo_pixcir_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
+ struct input_dev *input = ts->input;
+ int ret = 0;
+
+ mutex_lock(&input->mutex);
+
+ if (device_may_wakeup(&client->dev)) {
+ disable_irq_wake(client->irq);
+
+ /* need to stop device if it was not open on suspend */
+ if (!input->users) {
+ ret = auo_pixcir_stop(ts);
+ if (ret)
+ goto unlock;
+ }
+
+ /* device wakes automatically from SLEEP */
+ } else if (input->users) {
+ ret = auo_pixcir_start(ts);
+ }
+
+unlock:
+ mutex_unlock(&input->mutex);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops, auo_pixcir_suspend,
+ auo_pixcir_resume);
+
+static int __devinit auo_pixcir_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
+ struct auo_pixcir_ts *ts;
+ struct input_dev *input_dev;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ ts = kzalloc(sizeof(struct auo_pixcir_ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ret = gpio_request(pdata->gpio_int, "auo_pixcir_ts_int");
+ if (ret) {
+ dev_err(&client->dev, "request of gpio %d failed, %d\n",
+ pdata->gpio_int, ret);
+ goto err_gpio_int;
+ }
+
+ if (pdata->init_hw)
+ pdata->init_hw(client);
+
+ ts->client = client;
+ ts->touch_ind_mode = 0;
+ init_waitqueue_head(&ts->wait);
+
+ snprintf(ts->phys, sizeof(ts->phys),
+ "%s/input0", dev_name(&client->dev));
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&client->dev, "could not allocate input device\n");
+ goto err_input_alloc;
+ }
+
+ ts->input = input_dev;
+
+ input_dev->name = "AUO-Pixcir touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+
+ input_dev->open = auo_pixcir_input_open;
+ input_dev->close = auo_pixcir_input_close;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+
+ /* For single touch */
+ input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0);
+
+ /* For multi touch */
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+ pdata->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+ pdata->y_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+ AUO_PIXCIR_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
+ AUO_PIXCIR_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+ ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION);
+ if (ret < 0)
+ goto err_fw_vers;
+ dev_info(&client->dev, "firmware version 0x%X\n", ret);
+
+ ret = auo_pixcir_int_config(ts, pdata->int_setting);
+ if (ret)
+ goto err_fw_vers;
+
+ input_set_drvdata(ts->input, ts);
+ ts->stopped = true;
+
+ ret = request_threaded_irq(client->irq, NULL, auo_pixcir_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ input_dev->name, ts);
+ if (ret) {
+ dev_err(&client->dev, "irq %d requested failed\n", client->irq);
+ goto err_fw_vers;
+ }
+
+ /* stop device and put it into deep sleep until it is opened */
+ ret = auo_pixcir_stop(ts);
+ if (ret < 0)
+ goto err_input_register;
+
+ ret = input_register_device(input_dev);
+ if (ret) {
+ dev_err(&client->dev, "could not register input device\n");
+ goto err_input_register;
+ }
+
+ i2c_set_clientdata(client, ts);
+
+ return 0;
+
+err_input_register:
+ free_irq(client->irq, ts);
+err_fw_vers:
+ input_free_device(input_dev);
+err_input_alloc:
+ if (pdata->exit_hw)
+ pdata->exit_hw(client);
+ gpio_free(pdata->gpio_int);
+err_gpio_int:
+ kfree(ts);
+
+ return ret;
+}
+
+static int __devexit auo_pixcir_remove(struct i2c_client *client)
+{
+ struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
+ const struct auo_pixcir_ts_platdata *pdata = client->dev.platform_data;
+
+ free_irq(client->irq, ts);
+
+ input_unregister_device(ts->input);
+
+ if (pdata->exit_hw)
+ pdata->exit_hw(client);
+
+ gpio_free(pdata->gpio_int);
+
+ kfree(ts);
+
+ return 0;
+}
+
+static const struct i2c_device_id auo_pixcir_idtable[] = {
+ { "auo_pixcir_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable);
+
+static struct i2c_driver auo_pixcir_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "auo_pixcir_ts",
+ .pm = &auo_pixcir_pm_ops,
+ },
+ .probe = auo_pixcir_probe,
+ .remove = __devexit_p(auo_pixcir_remove),
+ .id_table = auo_pixcir_idtable,
+};
+
+static int __init auo_pixcir_init(void)
+{
+ return i2c_add_driver(&auo_pixcir_driver);
+}
+module_init(auo_pixcir_init);
+
+static void __exit auo_pixcir_exit(void)
+{
+ i2c_del_driver(&auo_pixcir_driver);
+}
+module_exit(auo_pixcir_exit);
+
+MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
index 2b72a5923c1..36b65cf10d7 100644
--- a/drivers/input/touchscreen/da9034-ts.c
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -379,18 +379,7 @@ static struct platform_driver da9034_touch_driver = {
.probe = da9034_touch_probe,
.remove = __devexit_p(da9034_touch_remove),
};
-
-static int __init da9034_touch_init(void)
-{
- return platform_driver_register(&da9034_touch_driver);
-}
-module_init(da9034_touch_init);
-
-static void __exit da9034_touch_exit(void)
-{
- platform_driver_unregister(&da9034_touch_driver);
-}
-module_exit(da9034_touch_exit);
+module_platform_driver(da9034_touch_driver);
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
new file mode 100644
index 00000000000..eadcc2e83c7
--- /dev/null
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -0,0 +1,303 @@
+/*
+ * Driver for EETI eGalax Multiple Touch Controller
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * based on max11801_ts.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* EETI eGalax serial touch screen controller is a I2C based multiple
+ * touch screen controller, it supports 5 point multiple touch. */
+
+/* TODO:
+ - auto idle mode support
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/input/mt.h>
+
+/*
+ * Mouse Mode: some panel may configure the controller to mouse mode,
+ * which can only report one point at a given time.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_MOUSE 0x1
+/*
+ * Vendor Mode: this mode is used to transfer some vendor specific
+ * messages.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_VENDOR 0x3
+/* Multiple Touch Mode */
+#define REPORT_MODE_MTTOUCH 0x4
+
+#define MAX_SUPPORT_POINTS 5
+
+#define EVENT_VALID_OFFSET 7
+#define EVENT_VALID_MASK (0x1 << EVENT_VALID_OFFSET)
+#define EVENT_ID_OFFSET 2
+#define EVENT_ID_MASK (0xf << EVENT_ID_OFFSET)
+#define EVENT_IN_RANGE (0x1 << 1)
+#define EVENT_DOWN_UP (0X1 << 0)
+
+#define MAX_I2C_DATA_LEN 10
+
+#define EGALAX_MAX_X 32760
+#define EGALAX_MAX_Y 32760
+#define EGALAX_MAX_TRIES 100
+
+struct egalax_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+};
+
+static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
+{
+ struct egalax_ts *ts = dev_id;
+ struct input_dev *input_dev = ts->input_dev;
+ struct i2c_client *client = ts->client;
+ u8 buf[MAX_I2C_DATA_LEN];
+ int id, ret, x, y, z;
+ int tries = 0;
+ bool down, valid;
+ u8 state;
+
+ do {
+ ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
+ } while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES);
+
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ if (buf[0] != REPORT_MODE_MTTOUCH) {
+ /* ignore mouse events and vendor events */
+ return IRQ_HANDLED;
+ }
+
+ state = buf[1];
+ x = (buf[3] << 8) | buf[2];
+ y = (buf[5] << 8) | buf[4];
+ z = (buf[7] << 8) | buf[6];
+
+ valid = state & EVENT_VALID_MASK;
+ id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
+ down = state & EVENT_DOWN_UP;
+
+ if (!valid || id > MAX_SUPPORT_POINTS) {
+ dev_dbg(&client->dev, "point invalid\n");
+ return IRQ_HANDLED;
+ }
+
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);
+
+ dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
+ down ? "down" : "up", id, x, y, z);
+
+ if (down) {
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, z);
+ }
+
+ input_mt_report_pointer_emulation(input_dev, true);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+/* wake up controller by an falling edge of interrupt gpio. */
+static int egalax_wake_up_device(struct i2c_client *client)
+{
+ int gpio = irq_to_gpio(client->irq);
+ int ret;
+
+ ret = gpio_request(gpio, "egalax_irq");
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "request gpio failed, cannot wake up controller: %d\n",
+ ret);
+ return ret;
+ }
+
+ /* wake up controller via an falling edge on IRQ gpio. */
+ gpio_direction_output(gpio, 0);
+ gpio_set_value(gpio, 1);
+
+ /* controller should be waken up, return irq. */
+ gpio_direction_input(gpio);
+ gpio_free(gpio);
+
+ return 0;
+}
+
+static int __devinit egalax_firmware_version(struct i2c_client *client)
+{
+ static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
+ int ret;
+
+ ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int __devinit egalax_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct egalax_ts *ts;
+ struct input_dev *input_dev;
+ int ret;
+ int error;
+
+ ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
+ if (!ts) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ error = -ENOMEM;
+ goto err_free_ts;
+ }
+
+ ts->client = client;
+ ts->input_dev = input_dev;
+
+ /* controller may be in sleep, wake it up. */
+ egalax_wake_up_device(client);
+
+ ret = egalax_firmware_version(client);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read firmware version\n");
+ error = -EIO;
+ goto err_free_dev;
+ }
+
+ input_dev->name = "EETI eGalax Touch Screen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
+ input_set_abs_params(input_dev,
+ ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
+ input_set_abs_params(input_dev,
+ ABS_MT_POSITION_X, 0, EGALAX_MAX_Y, 0, 0);
+ input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS);
+
+ input_set_drvdata(input_dev, ts);
+
+ error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "egalax_ts", ts);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_free_dev;
+ }
+
+ error = input_register_device(ts->input_dev);
+ if (error)
+ goto err_free_irq;
+
+ i2c_set_clientdata(client, ts);
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, ts);
+err_free_dev:
+ input_free_device(input_dev);
+err_free_ts:
+ kfree(ts);
+
+ return error;
+}
+
+static __devexit int egalax_ts_remove(struct i2c_client *client)
+{
+ struct egalax_ts *ts = i2c_get_clientdata(client);
+
+ free_irq(client->irq, ts);
+
+ input_unregister_device(ts->input_dev);
+ kfree(ts);
+
+ return 0;
+}
+
+static const struct i2c_device_id egalax_ts_id[] = {
+ { "egalax_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
+
+#ifdef CONFIG_PM_SLEEP
+static int egalax_ts_suspend(struct device *dev)
+{
+ static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
+ 0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
+ };
+ struct i2c_client *client = to_i2c_client(dev);
+ int ret;
+
+ ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN);
+ return ret > 0 ? 0 : ret;
+}
+
+static int egalax_ts_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ return egalax_wake_up_device(client);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+
+static struct i2c_driver egalax_ts_driver = {
+ .driver = {
+ .name = "egalax_ts",
+ .owner = THIS_MODULE,
+ .pm = &egalax_ts_pm_ops,
+ },
+ .id_table = egalax_ts_id,
+ .probe = egalax_ts_probe,
+ .remove = __devexit_p(egalax_ts_remove),
+};
+
+static int __init egalax_ts_init(void)
+{
+ return i2c_add_driver(&egalax_ts_driver);
+}
+
+static void __exit egalax_ts_exit(void)
+{
+ i2c_del_driver(&egalax_ts_driver);
+}
+
+module_init(egalax_ts_init);
+module_exit(egalax_ts_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c
index 62811de6f18..81e33862394 100644
--- a/drivers/input/touchscreen/htcpen.c
+++ b/drivers/input/touchscreen/htcpen.c
@@ -47,12 +47,6 @@ static int invert_y;
module_param(invert_y, bool, 0644);
MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
-static struct pnp_device_id pnp_ids[] = {
- { .id = "PNP0cc0" },
- { .id = "" }
-};
-MODULE_DEVICE_TABLE(pnp, pnp_ids);
-
static irqreturn_t htcpen_interrupt(int irq, void *handle)
{
struct input_dev *htcpen_dev = handle;
@@ -237,6 +231,7 @@ static struct dmi_system_id __initdata htcshift_dmi_table[] = {
},
{ }
};
+MODULE_DEVICE_TABLE(dmi, htcshift_dmi_table);
static int __init htcpen_isa_init(void)
{
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index 327695268e0..3cd7a837f82 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -664,18 +664,7 @@ static struct platform_driver mrstouch_driver = {
.probe = mrstouch_probe,
.remove = __devexit_p(mrstouch_remove),
};
-
-static int __init mrstouch_init(void)
-{
- return platform_driver_register(&mrstouch_driver);
-}
-module_init(mrstouch_init);
-
-static void __exit mrstouch_exit(void)
-{
- platform_driver_unregister(&mrstouch_driver);
-}
-module_exit(mrstouch_exit);
+module_platform_driver(mrstouch_driver);
MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 50076c2d59e..c3848ad2325 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -172,16 +172,4 @@ static struct platform_driver jornada720_ts_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init jornada720_ts_init(void)
-{
- return platform_driver_register(&jornada720_ts_driver);
-}
-
-static void __exit jornada720_ts_exit(void)
-{
- platform_driver_unregister(&jornada720_ts_driver);
-}
-
-module_init(jornada720_ts_init);
-module_exit(jornada720_ts_exit);
+module_platform_driver(jornada720_ts_driver);
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index 0a484ed5295..afcd0691ec6 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -392,18 +392,7 @@ static struct platform_driver lpc32xx_ts_driver = {
.pm = LPC32XX_TS_PM_OPS,
},
};
-
-static int __init lpc32xx_ts_init(void)
-{
- return platform_driver_register(&lpc32xx_ts_driver);
-}
-module_init(lpc32xx_ts_init);
-
-static void __exit lpc32xx_ts_exit(void)
-{
- platform_driver_unregister(&lpc32xx_ts_driver);
-}
-module_exit(lpc32xx_ts_exit);
+module_platform_driver(lpc32xx_ts_driver);
MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com");
MODULE_DESCRIPTION("LPC32XX TSC Driver");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index e966c29ff1b..7d2b2136e5a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -302,19 +302,7 @@ static struct platform_driver mainstone_wm97xx_driver = {
.name = "wm97xx-touch",
},
};
-
-static int __init mainstone_wm97xx_init(void)
-{
- return platform_driver_register(&mainstone_wm97xx_driver);
-}
-
-static void __exit mainstone_wm97xx_exit(void)
-{
- platform_driver_unregister(&mainstone_wm97xx_driver);
-}
-
-module_init(mainstone_wm97xx_init);
-module_exit(mainstone_wm97xx_exit);
+module_platform_driver(mainstone_wm97xx_driver);
/* Module information */
MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
index ede02743eac..68f86f7dabb 100644
--- a/drivers/input/touchscreen/mc13783_ts.c
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -240,18 +240,7 @@ static struct platform_driver mc13783_ts_driver = {
.name = MC13783_TS_NAME,
},
};
-
-static int __init mc13783_ts_init(void)
-{
- return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe);
-}
-module_init(mc13783_ts_init);
-
-static void __exit mc13783_ts_exit(void)
-{
- platform_driver_unregister(&mc13783_ts_driver);
-}
-module_exit(mc13783_ts_exit);
+module_platform_driver(mc13783_ts_driver);
MODULE_DESCRIPTION("MC13783 input touchscreen driver");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index 5803bd0c1cc..5226194aa78 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -36,7 +36,6 @@
struct migor_ts_priv {
struct i2c_client *client;
struct input_dev *input;
- struct delayed_work work;
int irq;
};
@@ -44,15 +43,24 @@ static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
0x01, 0x06, 0x07, };
static const u_int8_t migor_ts_dis_seq[17] = { };
-static void migor_ts_poscheck(struct work_struct *work)
+static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
- struct migor_ts_priv *priv = container_of(work,
- struct migor_ts_priv,
- work.work);
+ struct migor_ts_priv *priv = dev_id;
unsigned short xpos, ypos;
unsigned char event;
u_int8_t buf[16];
+ /*
+ * The touch screen controller chip is hooked up to the CPU
+ * using I2C and a single interrupt line. The interrupt line
+ * is pulled low whenever someone taps the screen. To deassert
+ * the interrupt line we need to acknowledge the interrupt by
+ * communicating with the controller over the slow i2c bus.
+ *
+ * Since I2C bus controller may sleep we are using threaded
+ * IRQ here.
+ */
+
memset(buf, 0, sizeof(buf));
/* Set Index 0 */
@@ -72,41 +80,25 @@ static void migor_ts_poscheck(struct work_struct *work)
xpos = ((buf[11] & 0x03) << 8 | buf[10]);
event = buf[12];
- if (event == EVENT_PENDOWN || event == EVENT_REPEAT) {
+ switch (event) {
+ case EVENT_PENDOWN:
+ case EVENT_REPEAT:
input_report_key(priv->input, BTN_TOUCH, 1);
input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
input_report_abs(priv->input, ABS_Y, xpos);
input_sync(priv->input);
- } else if (event == EVENT_PENUP) {
+ break;
+
+ case EVENT_PENUP:
input_report_key(priv->input, BTN_TOUCH, 0);
input_sync(priv->input);
+ break;
}
- out:
- enable_irq(priv->irq);
-}
-
-static irqreturn_t migor_ts_isr(int irq, void *dev_id)
-{
- struct migor_ts_priv *priv = dev_id;
-
- /* the touch screen controller chip is hooked up to the cpu
- * using i2c and a single interrupt line. the interrupt line
- * is pulled low whenever someone taps the screen. to deassert
- * the interrupt line we need to acknowledge the interrupt by
- * communicating with the controller over the slow i2c bus.
- *
- * we can't acknowledge from interrupt context since the i2c
- * bus controller may sleep, so we just disable the interrupt
- * here and handle the acknowledge using delayed work.
- */
-
- disable_irq_nosync(irq);
- schedule_delayed_work(&priv->work, HZ / 20);
+ out:
return IRQ_HANDLED;
}
-
static int migor_ts_open(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
@@ -131,15 +123,6 @@ static void migor_ts_close(struct input_dev *dev)
disable_irq(priv->irq);
- /* cancel pending work and wait for migor_ts_poscheck() to finish */
- if (cancel_delayed_work_sync(&priv->work)) {
- /*
- * if migor_ts_poscheck was canceled we need to enable IRQ
- * here to balance disable done in migor_ts_isr.
- */
- enable_irq(priv->irq);
- }
-
/* disable controller */
i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
@@ -154,23 +137,20 @@ static int migor_ts_probe(struct i2c_client *client,
int error;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(&client->dev, "failed to allocate driver data\n");
- error = -ENOMEM;
- goto err0;
- }
-
- dev_set_drvdata(&client->dev, priv);
-
input = input_allocate_device();
- if (!input) {
- dev_err(&client->dev, "Failed to allocate input device.\n");
+ if (!priv || !input) {
+ dev_err(&client->dev, "failed to allocate memory\n");
error = -ENOMEM;
- goto err1;
+ goto err_free_mem;
}
+ priv->client = client;
+ priv->input = input;
+ priv->irq = client->irq;
+
input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ __set_bit(BTN_TOUCH, input->keybit);
input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
@@ -184,39 +164,34 @@ static int migor_ts_probe(struct i2c_client *client,
input_set_drvdata(input, priv);
- priv->client = client;
- priv->input = input;
- INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck);
- priv->irq = client->irq;
-
- error = input_register_device(input);
- if (error)
- goto err1;
-
- error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
- client->name, priv);
+ error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
- goto err2;
+ goto err_free_mem;
}
+ error = input_register_device(input);
+ if (error)
+ goto err_free_irq;
+
+ i2c_set_clientdata(client, priv);
device_init_wakeup(&client->dev, 1);
+
return 0;
- err2:
- input_unregister_device(input);
- input = NULL; /* so we dont try to free it below */
- err1:
+ err_free_irq:
+ free_irq(priv->irq, priv);
+ err_free_mem:
input_free_device(input);
kfree(priv);
- err0:
- dev_set_drvdata(&client->dev, NULL);
return error;
}
static int migor_ts_remove(struct i2c_client *client)
{
- struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
+ struct migor_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
input_unregister_device(priv->input);
@@ -230,7 +205,7 @@ static int migor_ts_remove(struct i2c_client *client)
static int migor_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
- struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
+ struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
@@ -241,7 +216,7 @@ static int migor_ts_suspend(struct device *dev)
static int migor_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
- struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
+ struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
index ea6ef16e59b..f57aeb80f7e 100644
--- a/drivers/input/touchscreen/pcap_ts.c
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -252,19 +252,7 @@ static struct platform_driver pcap_ts_driver = {
.pm = PCAP_TS_PM_OPS,
},
};
-
-static int __init pcap_ts_init(void)
-{
- return platform_driver_register(&pcap_ts_driver);
-}
-
-static void __exit pcap_ts_exit(void)
-{
- platform_driver_unregister(&pcap_ts_driver);
-}
-
-module_init(pcap_ts_init);
-module_exit(pcap_ts_exit);
+module_platform_driver(pcap_ts_driver);
MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
new file mode 100644
index 00000000000..d5ac09a1ee5
--- /dev/null
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -0,0 +1,239 @@
+/*
+ * Driver for Pixcir I2C touchscreen controllers.
+ *
+ * Copyright (C) 2010-2011 Pixcir, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/pixcir_ts.h>
+
+struct pixcir_i2c_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ const struct pixcir_ts_platform_data *chip;
+ bool exiting;
+};
+
+static void pixcir_ts_poscheck(struct pixcir_i2c_ts_data *data)
+{
+ struct pixcir_i2c_ts_data *tsdata = data;
+ u8 rdbuf[10], wrbuf[1] = { 0 };
+ u8 touch;
+ int ret;
+
+ ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
+ if (ret != sizeof(wrbuf)) {
+ dev_err(&tsdata->client->dev,
+ "%s: i2c_master_send failed(), ret=%d\n",
+ __func__, ret);
+ return;
+ }
+
+ ret = i2c_master_recv(tsdata->client, rdbuf, sizeof(rdbuf));
+ if (ret != sizeof(rdbuf)) {
+ dev_err(&tsdata->client->dev,
+ "%s: i2c_master_recv failed(), ret=%d\n",
+ __func__, ret);
+ return;
+ }
+
+ touch = rdbuf[0];
+ if (touch) {
+ u16 posx1 = (rdbuf[3] << 8) | rdbuf[2];
+ u16 posy1 = (rdbuf[5] << 8) | rdbuf[4];
+ u16 posx2 = (rdbuf[7] << 8) | rdbuf[6];
+ u16 posy2 = (rdbuf[9] << 8) | rdbuf[8];
+
+ input_report_key(tsdata->input, BTN_TOUCH, 1);
+ input_report_abs(tsdata->input, ABS_X, posx1);
+ input_report_abs(tsdata->input, ABS_Y, posy1);
+
+ input_report_abs(tsdata->input, ABS_MT_POSITION_X, posx1);
+ input_report_abs(tsdata->input, ABS_MT_POSITION_Y, posy1);
+ input_mt_sync(tsdata->input);
+
+ if (touch == 2) {
+ input_report_abs(tsdata->input,
+ ABS_MT_POSITION_X, posx2);
+ input_report_abs(tsdata->input,
+ ABS_MT_POSITION_Y, posy2);
+ input_mt_sync(tsdata->input);
+ }
+ } else {
+ input_report_key(tsdata->input, BTN_TOUCH, 0);
+ }
+
+ input_sync(tsdata->input);
+}
+
+static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
+{
+ struct pixcir_i2c_ts_data *tsdata = dev_id;
+
+ while (!tsdata->exiting) {
+ pixcir_ts_poscheck(tsdata);
+
+ if (tsdata->chip->attb_read_val())
+ break;
+
+ msleep(20);
+ }
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pixcir_i2c_ts_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int pixcir_i2c_ts_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
+ pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
+
+static int __devinit pixcir_i2c_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct pixcir_ts_platform_data *pdata = client->dev.platform_data;
+ struct pixcir_i2c_ts_data *tsdata;
+ struct input_dev *input;
+ int error;
+
+ if (!pdata) {
+ dev_err(&client->dev, "platform data not defined\n");
+ return -EINVAL;
+ }
+
+ tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!tsdata || !input) {
+ dev_err(&client->dev, "Failed to allocate driver data!\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ tsdata->client = client;
+ tsdata->input = input;
+ tsdata->chip = pdata;
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->dev.parent = &client->dev;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(EV_ABS, input->evbit);
+ __set_bit(BTN_TOUCH, input->keybit);
+ input_set_abs_params(input, ABS_X, 0, pdata->x_max, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, pdata->y_max, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
+ input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
+
+ input_set_drvdata(input, tsdata);
+
+ error = request_threaded_irq(client->irq, NULL, pixcir_ts_isr,
+ IRQF_TRIGGER_FALLING,
+ client->name, tsdata);
+ if (error) {
+ dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+ goto err_free_mem;
+ }
+
+ error = input_register_device(input);
+ if (error)
+ goto err_free_irq;
+
+ i2c_set_clientdata(client, tsdata);
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, tsdata);
+err_free_mem:
+ input_free_device(input);
+ kfree(tsdata);
+ return error;
+}
+
+static int __devexit pixcir_i2c_ts_remove(struct i2c_client *client)
+{
+ struct pixcir_i2c_ts_data *tsdata = i2c_get_clientdata(client);
+
+ device_init_wakeup(&client->dev, 0);
+
+ tsdata->exiting = true;
+ mb();
+ free_irq(client->irq, tsdata);
+
+ input_unregister_device(tsdata->input);
+ kfree(tsdata);
+
+ return 0;
+}
+
+static const struct i2c_device_id pixcir_i2c_ts_id[] = {
+ { "pixcir_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
+
+static struct i2c_driver pixcir_i2c_ts_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pixcir_ts",
+ .pm = &pixcir_dev_pm_ops,
+ },
+ .probe = pixcir_i2c_ts_probe,
+ .remove = __devexit_p(pixcir_i2c_ts_remove),
+ .id_table = pixcir_i2c_ts_id,
+};
+
+static int __init pixcir_i2c_ts_init(void)
+{
+ return i2c_add_driver(&pixcir_i2c_ts_driver);
+}
+module_init(pixcir_i2c_ts_init);
+
+static void __exit pixcir_i2c_ts_exit(void)
+{
+ i2c_del_driver(&pixcir_i2c_ts_driver);
+}
+module_exit(pixcir_i2c_ts_exit);
+
+MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
+MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 64ce697a345..bf1a0640006 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -432,19 +432,7 @@ static struct platform_driver s3c_ts_driver = {
.probe = s3c2410ts_probe,
.remove = __devexit_p(s3c2410ts_remove),
};
-
-static int __init s3c2410ts_init(void)
-{
- return platform_driver_register(&s3c_ts_driver);
-}
-
-static void __exit s3c2410ts_exit(void)
-{
- platform_driver_unregister(&s3c_ts_driver);
-}
-
-module_init(s3c2410ts_init);
-module_exit(s3c2410ts_exit);
+module_platform_driver(s3c_ts_driver);
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
"Ben Dooks <ben@simtec.co.uk>, "
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
index ae88e13c99f..692b685720c 100644
--- a/drivers/input/touchscreen/stmpe-ts.c
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -379,20 +379,7 @@ static struct platform_driver stmpe_ts_driver = {
.probe = stmpe_input_probe,
.remove = __devexit_p(stmpe_ts_remove),
};
-
-static int __init stmpe_ts_init(void)
-{
- return platform_driver_register(&stmpe_ts_driver);
-}
-
-module_init(stmpe_ts_init);
-
-static void __exit stmpe_ts_exit(void)
-{
- platform_driver_unregister(&stmpe_ts_driver);
-}
-
-module_exit(stmpe_ts_exit);
+module_platform_driver(stmpe_ts_driver);
MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c
index 0e8f63e5b36..7e748809735 100644
--- a/drivers/input/touchscreen/tnetv107x-ts.c
+++ b/drivers/input/touchscreen/tnetv107x-ts.c
@@ -378,19 +378,7 @@ static struct platform_driver tsc_driver = {
.driver.name = "tnetv107x-ts",
.driver.owner = THIS_MODULE,
};
-
-static int __init tsc_init(void)
-{
- return platform_driver_register(&tsc_driver);
-}
-
-static void __exit tsc_exit(void)
-{
- platform_driver_unregister(&tsc_driver);
-}
-
-module_init(tsc_init);
-module_exit(tsc_exit);
+module_platform_driver(tsc_driver);
MODULE_AUTHOR("Cyril Chemparathy");
MODULE_DESCRIPTION("TNETV107X Touchscreen Driver");
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index 43031492d73..6c6f6d8ea9b 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -371,18 +371,7 @@ static struct platform_driver tps6507x_ts_driver = {
.probe = tps6507x_ts_probe,
.remove = __devexit_p(tps6507x_ts_remove),
};
-
-static int __init tps6507x_ts_init(void)
-{
- return platform_driver_register(&tps6507x_ts_driver);
-}
-module_init(tps6507x_ts_init);
-
-static void __exit tps6507x_ts_exit(void)
-{
- platform_driver_unregister(&tps6507x_ts_driver);
-}
-module_exit(tps6507x_ts_exit);
+module_platform_driver(tps6507x_ts_driver);
MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 3b5b5df04dd..d2b57536fee 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -20,24 +20,24 @@
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
#include <linux/input.h>
#include <linux/device.h>
#include <linux/interrupt.h>
-#include <linux/suspend.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
#include <linux/ucb1400.h>
+#define UCB1400_TS_POLL_PERIOD 10 /* ms */
+
static int adcsync;
static int ts_delay = 55; /* us */
static int ts_delay_pressure; /* us */
/* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
+static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ac97, UCB_TS_CR,
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_INT);
@@ -47,13 +47,15 @@ static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
* Switch to pressure mode, and read pressure. We don't need to wait
* here, since both plates are being driven.
*/
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+
udelay(ts_delay_pressure);
+
return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
}
@@ -63,7 +65,7 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
@@ -86,7 +88,7 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
* gives a faster response time. Even so, we need to wait about 55us
* for things to stabilise.
*/
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
+static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
@@ -107,7 +109,7 @@ static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
* Switch to X plate resistance mode. Set MX to ground, PX to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
@@ -119,7 +121,7 @@ static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
* Switch to Y plate resistance mode. Set MY to ground, PY to
* supply. Measure current.
*/
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
+static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
{
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
@@ -127,26 +129,26 @@ static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
return ucb1400_adc_read(ucb->ac97, 0, adcsync);
}
-static inline int ucb1400_ts_pen_up(struct snd_ac97 *ac97)
+static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb)
{
- unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
+ unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR);
return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
}
-static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
+static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
- ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
- ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX);
}
-static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
+static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb)
{
- ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
+ ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
}
-static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
+static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y)
{
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
@@ -162,7 +164,7 @@ static void ucb1400_ts_event_release(struct input_dev *idev)
input_sync(idev);
}
-static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
+static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb)
{
unsigned int isr;
@@ -171,32 +173,34 @@ static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
if (isr & UCB_IE_TSPX)
- ucb1400_ts_irq_disable(ucb->ac97);
+ ucb1400_ts_irq_disable(ucb);
else
- dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr);
- enable_irq(ucb->irq);
+ dev_dbg(&ucb->ts_idev->dev,
+ "ucb1400: unexpected IE_STATUS = %#x\n", isr);
}
-static int ucb1400_ts_thread(void *_ucb)
+/*
+ * A restriction with interrupts exists when using the ucb1400, as
+ * the codec read/write routines may sleep while waiting for codec
+ * access completion and uses semaphores for access control to the
+ * AC97 bus. Therefore the driver is forced to use threaded interrupt
+ * handler.
+ */
+static irqreturn_t ucb1400_irq(int irqnr, void *devid)
{
- struct ucb1400_ts *ucb = _ucb;
- struct task_struct *tsk = current;
- int valid = 0;
- struct sched_param param = { .sched_priority = 1 };
+ struct ucb1400_ts *ucb = devid;
+ unsigned int x, y, p;
+ bool penup;
- sched_setscheduler(tsk, SCHED_FIFO, &param);
+ if (unlikely(irqnr != ucb->irq))
+ return IRQ_NONE;
- set_freezable();
- while (!kthread_should_stop()) {
- unsigned int x, y, p;
- long timeout;
+ ucb1400_clear_pending_irq(ucb);
- ucb->ts_restart = 0;
+ /* Start with a small delay before checking pendown state */
+ msleep(UCB1400_TS_POLL_PERIOD);
- if (ucb->irq_pending) {
- ucb->irq_pending = 0;
- ucb1400_handle_pending_irq(ucb);
- }
+ while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) {
ucb1400_adc_enable(ucb->ac97);
x = ucb1400_ts_read_xpos(ucb);
@@ -204,91 +208,62 @@ static int ucb1400_ts_thread(void *_ucb)
p = ucb1400_ts_read_pressure(ucb);
ucb1400_adc_disable(ucb->ac97);
- /* Switch back to interrupt mode. */
- ucb1400_ts_mode_int(ucb->ac97);
-
- msleep(10);
-
- if (ucb1400_ts_pen_up(ucb->ac97)) {
- ucb1400_ts_irq_enable(ucb->ac97);
-
- /*
- * If we spat out a valid sample set last time,
- * spit out a "pen off" sample here.
- */
- if (valid) {
- ucb1400_ts_event_release(ucb->ts_idev);
- valid = 0;
- }
-
- timeout = MAX_SCHEDULE_TIMEOUT;
- } else {
- valid = 1;
- ucb1400_ts_evt_add(ucb->ts_idev, p, x, y);
- timeout = msecs_to_jiffies(10);
- }
+ ucb1400_ts_report_event(ucb->ts_idev, p, x, y);
- wait_event_freezable_timeout(ucb->ts_wait,
- ucb->irq_pending || ucb->ts_restart ||
- kthread_should_stop(), timeout);
+ wait_event_timeout(ucb->ts_wait, ucb->stopped,
+ msecs_to_jiffies(UCB1400_TS_POLL_PERIOD));
}
- /* Send the "pen off" if we are stopping with the pen still active */
- if (valid)
- ucb1400_ts_event_release(ucb->ts_idev);
+ ucb1400_ts_event_release(ucb->ts_idev);
- ucb->ts_task = NULL;
- return 0;
+ if (!ucb->stopped) {
+ /* Switch back to interrupt mode. */
+ ucb1400_ts_mode_int(ucb);
+ ucb1400_ts_irq_enable(ucb);
+ }
+
+ return IRQ_HANDLED;
}
-/*
- * A restriction with interrupts exists when using the ucb1400, as
- * the codec read/write routines may sleep while waiting for codec
- * access completion and uses semaphores for access control to the
- * AC97 bus. A complete codec read cycle could take anywhere from
- * 60 to 100uSec so we *definitely* don't want to spin inside the
- * interrupt handler waiting for codec access. So, we handle the
- * interrupt by scheduling a RT kernel thread to run in process
- * context instead of interrupt context.
- */
-static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
+static void ucb1400_ts_stop(struct ucb1400_ts *ucb)
{
- struct ucb1400_ts *ucb = devid;
+ /* Signal IRQ thread to stop polling and disable the handler. */
+ ucb->stopped = true;
+ mb();
+ wake_up(&ucb->ts_wait);
+ disable_irq(ucb->irq);
- if (irqnr == ucb->irq) {
- disable_irq_nosync(ucb->irq);
- ucb->irq_pending = 1;
- wake_up(&ucb->ts_wait);
- return IRQ_HANDLED;
- }
- return IRQ_NONE;
+ ucb1400_ts_irq_disable(ucb);
+ ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
+}
+
+/* Must be called with ts->lock held */
+static void ucb1400_ts_start(struct ucb1400_ts *ucb)
+{
+ /* Tell IRQ thread that it may poll the device. */
+ ucb->stopped = false;
+ mb();
+
+ ucb1400_ts_mode_int(ucb);
+ ucb1400_ts_irq_enable(ucb);
+
+ enable_irq(ucb->irq);
}
static int ucb1400_ts_open(struct input_dev *idev)
{
struct ucb1400_ts *ucb = input_get_drvdata(idev);
- int ret = 0;
- BUG_ON(ucb->ts_task);
+ ucb1400_ts_start(ucb);
- ucb->ts_task = kthread_run(ucb1400_ts_thread, ucb, "UCB1400_ts");
- if (IS_ERR(ucb->ts_task)) {
- ret = PTR_ERR(ucb->ts_task);
- ucb->ts_task = NULL;
- }
-
- return ret;
+ return 0;
}
static void ucb1400_ts_close(struct input_dev *idev)
{
struct ucb1400_ts *ucb = input_get_drvdata(idev);
- if (ucb->ts_task)
- kthread_stop(ucb->ts_task);
-
- ucb1400_ts_irq_disable(ucb->ac97);
- ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
+ ucb1400_ts_stop(ucb);
}
#ifndef NO_IRQ
@@ -299,7 +274,8 @@ static void ucb1400_ts_close(struct input_dev *idev)
* Try to probe our interrupt, rather than relying on lots of
* hard-coded machine dependencies.
*/
-static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
+static int __devinit ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
+ struct platform_device *pdev)
{
unsigned long mask, timeout;
@@ -321,7 +297,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
UCB_ADC_DAT_VALID)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
- printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
+ dev_err(&pdev->dev, "timed out in IRQ probe\n");
probe_irq_off(mask);
return -ENODEV;
}
@@ -342,11 +318,11 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
return 0;
}
-static int ucb1400_ts_probe(struct platform_device *dev)
+static int __devinit ucb1400_ts_probe(struct platform_device *pdev)
{
+ struct ucb1400_ts *ucb = pdev->dev.platform_data;
int error, x_res, y_res;
u16 fcsr;
- struct ucb1400_ts *ucb = dev->dev.platform_data;
ucb->ts_idev = input_allocate_device();
if (!ucb->ts_idev) {
@@ -356,27 +332,19 @@ static int ucb1400_ts_probe(struct platform_device *dev)
/* Only in case the IRQ line wasn't supplied, try detecting it */
if (ucb->irq < 0) {
- error = ucb1400_ts_detect_irq(ucb);
+ error = ucb1400_ts_detect_irq(ucb, pdev);
if (error) {
- printk(KERN_ERR "UCB1400: IRQ probe failed\n");
+ dev_err(&pdev->dev, "IRQ probe failed\n");
goto err_free_devs;
}
}
+ dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq);
init_waitqueue_head(&ucb->ts_wait);
- error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
- "UCB1400", ucb);
- if (error) {
- printk(KERN_ERR "ucb1400: unable to grab irq%d: %d\n",
- ucb->irq, error);
- goto err_free_devs;
- }
- printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
-
input_set_drvdata(ucb->ts_idev, ucb);
- ucb->ts_idev->dev.parent = &dev->dev;
+ ucb->ts_idev->dev.parent = &pdev->dev;
ucb->ts_idev->name = "UCB1400 touchscreen interface";
ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
AC97_VENDOR_ID1);
@@ -398,12 +366,23 @@ static int ucb1400_ts_probe(struct platform_device *dev)
x_res = ucb1400_ts_read_xres(ucb);
y_res = ucb1400_ts_read_yres(ucb);
ucb1400_adc_disable(ucb->ac97);
- printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
+ dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res);
input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
+ ucb1400_ts_stop(ucb);
+
+ error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "UCB1400", ucb);
+ if (error) {
+ dev_err(&pdev->dev,
+ "unable to grab irq%d: %d\n", ucb->irq, error);
+ goto err_free_devs;
+ }
+
error = input_register_device(ucb->ts_idev);
if (error)
goto err_free_irq;
@@ -416,56 +395,61 @@ err_free_devs:
input_free_device(ucb->ts_idev);
err:
return error;
-
}
-static int ucb1400_ts_remove(struct platform_device *dev)
+static int __devexit ucb1400_ts_remove(struct platform_device *pdev)
{
- struct ucb1400_ts *ucb = dev->dev.platform_data;
+ struct ucb1400_ts *ucb = pdev->dev.platform_data;
free_irq(ucb->irq, ucb);
input_unregister_device(ucb->ts_idev);
+
return 0;
}
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct platform_device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int ucb1400_ts_suspend(struct device *dev)
{
- struct ucb1400_ts *ucb = dev->dev.platform_data;
-
- if (ucb->ts_task) {
- /*
- * Restart the TS thread to ensure the
- * TS interrupt mode is set up again
- * after sleep.
- */
- ucb->ts_restart = 1;
- wake_up(&ucb->ts_wait);
- }
+ struct ucb1400_ts *ucb = dev->platform_data;
+ struct input_dev *idev = ucb->ts_idev;
+
+ mutex_lock(&idev->mutex);
+
+ if (idev->users)
+ ucb1400_ts_start(ucb);
+
+ mutex_unlock(&idev->mutex);
+ return 0;
+}
+
+static int ucb1400_ts_resume(struct device *dev)
+{
+ struct ucb1400_ts *ucb = dev->platform_data;
+ struct input_dev *idev = ucb->ts_idev;
+
+ mutex_lock(&idev->mutex);
+
+ if (idev->users)
+ ucb1400_ts_stop(ucb);
+
+ mutex_unlock(&idev->mutex);
return 0;
}
-#else
-#define ucb1400_ts_resume NULL
#endif
+static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
+ ucb1400_ts_suspend, ucb1400_ts_resume);
+
static struct platform_driver ucb1400_ts_driver = {
.probe = ucb1400_ts_probe,
- .remove = ucb1400_ts_remove,
- .resume = ucb1400_ts_resume,
+ .remove = __devexit_p(ucb1400_ts_remove),
.driver = {
.name = "ucb1400_ts",
+ .owner = THIS_MODULE,
+ .pm = &ucb1400_ts_pm_ops,
},
};
-
-static int __init ucb1400_ts_init(void)
-{
- return platform_driver_register(&ucb1400_ts_driver);
-}
-
-static void __exit ucb1400_ts_exit(void)
-{
- platform_driver_unregister(&ucb1400_ts_driver);
-}
+module_platform_driver(ucb1400_ts_driver);
module_param(adcsync, bool, 0444);
MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
@@ -479,8 +463,5 @@ MODULE_PARM_DESC(ts_delay_pressure,
"delay between panel setup and pressure read."
" Default = 0us.");
-module_init(ucb1400_ts_init);
-module_exit(ucb1400_ts_exit);
-
MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index e539d92cc62..06cef3ccc63 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -16,6 +16,7 @@
* - JASTEC USB touch controller/DigiTech DTR-02U
* - Zytronic capacitive touchscreen
* - NEXIO/iNexio
+ * - Elo TouchSystems 2700 IntelliTouch
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -138,6 +139,7 @@ enum {
DEVTYPE_ZYTRONIC,
DEVTYPE_TC45USB,
DEVTYPE_NEXIO,
+ DEVTYPE_ELO,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -239,6 +241,10 @@ static const struct usb_device_id usbtouch_devices[] = {
.driver_info = DEVTYPE_NEXIO},
#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+ {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
+#endif
+
{}
};
@@ -945,6 +951,24 @@ static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
/*****************************************************************************
+ * ELO part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+
+static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = (pkt[3] << 8) | pkt[2];
+ dev->y = (pkt[5] << 8) | pkt[4];
+ dev->touch = pkt[6] > 0;
+ dev->press = pkt[6];
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
* the different device descriptors
*/
#ifdef MULTI_PACKET
@@ -953,6 +977,18 @@ static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
#endif
static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+ [DEVTYPE_ELO] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .max_press = 0xff,
+ .rept_size = 8,
+ .read_data = elo_read_data,
+ },
+#endif
+
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 217aa51135c..9396b21d0e8 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -331,19 +331,7 @@ static struct platform_driver w90x900ts_driver = {
.owner = THIS_MODULE,
},
};
-
-static int __init w90x900ts_init(void)
-{
- return platform_driver_register(&w90x900ts_driver);
-}
-
-static void __exit w90x900ts_exit(void)
-{
- platform_driver_unregister(&w90x900ts_driver);
-}
-
-module_init(w90x900ts_init);
-module_exit(w90x900ts_exit);
+module_platform_driver(w90x900ts_driver);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
MODULE_DESCRIPTION("w90p910 touch screen driver!");
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
index 9175d49d254..4bc851a9dc3 100644
--- a/drivers/input/touchscreen/wm831x-ts.c
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -401,18 +401,7 @@ static struct platform_driver wm831x_ts_driver = {
.probe = wm831x_ts_probe,
.remove = __devexit_p(wm831x_ts_remove),
};
-
-static int __init wm831x_ts_init(void)
-{
- return platform_driver_register(&wm831x_ts_driver);
-}
-module_init(wm831x_ts_init);
-
-static void __exit wm831x_ts_exit(void)
-{
- platform_driver_unregister(&wm831x_ts_driver);
-}
-module_exit(wm831x_ts_exit);
+module_platform_driver(wm831x_ts_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 0a707bbbbea..bf0869a7a78 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -224,19 +224,7 @@ static struct platform_driver zylonite_wm97xx_driver = {
.name = "wm97xx-touch",
},
};
-
-static int __init zylonite_wm97xx_init(void)
-{
- return platform_driver_register(&zylonite_wm97xx_driver);
-}
-
-static void __exit zylonite_wm97xx_exit(void)
-{
- platform_driver_unregister(&zylonite_wm97xx_driver);
-}
-
-module_init(zylonite_wm97xx_init);
-module_exit(zylonite_wm97xx_exit);
+module_platform_driver(zylonite_wm97xx_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
diff --git a/include/linux/input/auo-pixcir-ts.h b/include/linux/input/auo-pixcir-ts.h
new file mode 100644
index 00000000000..75d4be71771
--- /dev/null
+++ b/include/linux/input/auo-pixcir-ts.h
@@ -0,0 +1,56 @@
+/*
+ * Driver for AUO in-cell touchscreens
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on auo_touch.h from Dell Streak kernel
+ *
+ * Copyright (c) 2008 QUALCOMM Incorporated.
+ * Copyright (c) 2008 QUALCOMM USA, INC.
+ *
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __AUO_PIXCIR_TS_H__
+#define __AUO_PIXCIR_TS_H__
+
+/*
+ * Interrupt modes:
+ * periodical: interrupt is asserted periodicaly
+ * compare coordinates: interrupt is asserted when coordinates change
+ * indicate touch: interrupt is asserted during touch
+ */
+#define AUO_PIXCIR_INT_PERIODICAL 0x00
+#define AUO_PIXCIR_INT_COMP_COORD 0x01
+#define AUO_PIXCIR_INT_TOUCH_IND 0x02
+
+/*
+ * @gpio_int interrupt gpio
+ * @int_setting one of AUO_PIXCIR_INT_*
+ * @init_hw hardwarespecific init
+ * @exit_hw hardwarespecific shutdown
+ * @x_max x-resolution
+ * @y_max y-resolution
+ */
+struct auo_pixcir_ts_platdata {
+ int gpio_int;
+
+ int int_setting;
+
+ void (*init_hw)(struct i2c_client *);
+ void (*exit_hw)(struct i2c_client *);
+
+ unsigned int x_max;
+ unsigned int y_max;
+};
+
+#endif
diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
new file mode 100644
index 00000000000..aad2fd44a61
--- /dev/null
+++ b/include/linux/input/gp2ap002a00f.h
@@ -0,0 +1,22 @@
+#ifndef _GP2AP002A00F_H_
+#define _GP2AP002A00F_H_
+
+#include <linux/i2c.h>
+
+#define GP2A_I2C_NAME "gp2ap002a00f"
+
+/**
+ * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
+ * @vout_gpio: The gpio connected to the object detected pin (VOUT)
+ * @wakeup: Set to true if the proximity can wake the device from suspend
+ * @hw_setup: Callback for setting up hardware such as gpios and vregs
+ * @hw_shutdown: Callback for properly shutting down hardware
+ */
+struct gp2a_platform_data {
+ int vout_gpio;
+ bool wakeup;
+ int (*hw_setup)(struct i2c_client *client);
+ int (*hw_shutdown)(struct i2c_client *client);
+};
+
+#endif
diff --git a/include/linux/input/gpio_tilt.h b/include/linux/input/gpio_tilt.h
new file mode 100644
index 00000000000..c1cc52d380e
--- /dev/null
+++ b/include/linux/input/gpio_tilt.h
@@ -0,0 +1,73 @@
+#ifndef _INPUT_GPIO_TILT_H
+#define _INPUT_GPIO_TILT_H
+
+/**
+ * struct gpio_tilt_axis - Axis used by the tilt switch
+ * @axis: Constant describing the axis, e.g. ABS_X
+ * @min: minimum value for abs_param
+ * @max: maximum value for abs_param
+ * @fuzz: fuzz value for abs_param
+ * @flat: flat value for abs_param
+ */
+struct gpio_tilt_axis {
+ int axis;
+ int min;
+ int max;
+ int fuzz;
+ int flat;
+};
+
+/**
+ * struct gpio_tilt_state - state description
+ * @gpios: bitfield of gpio target-states for the value
+ * @axes: array containing the axes settings for the gpio state
+ * The array indizes must correspond to the axes defined
+ * in platform_data
+ *
+ * This structure describes a supported axis settings
+ * and the necessary gpio-state which represent it.
+ *
+ * The n-th bit in the bitfield describes the state of the n-th GPIO
+ * from the gpios-array defined in gpio_regulator_config below.
+ */
+struct gpio_tilt_state {
+ int gpios;
+ int *axes;
+};
+
+/**
+ * struct gpio_tilt_platform_data
+ * @gpios: Array containing the gpios determining the tilt state
+ * @nr_gpios: Number of gpios
+ * @axes: Array of gpio_tilt_axis descriptions
+ * @nr_axes: Number of axes
+ * @states: Array of gpio_tilt_state entries describing
+ * the gpio state for specific tilts
+ * @nr_states: Number of states available
+ * @debounce_interval: debounce ticks interval in msecs
+ * @poll_interval: polling interval in msecs - for polling driver only
+ * @enable: callback to enable the tilt switch
+ * @disable: callback to disable the tilt switch
+ *
+ * This structure contains gpio-tilt-switch configuration
+ * information that must be passed by platform code to the
+ * gpio-tilt input driver.
+ */
+struct gpio_tilt_platform_data {
+ struct gpio *gpios;
+ int nr_gpios;
+
+ struct gpio_tilt_axis *axes;
+ int nr_axes;
+
+ struct gpio_tilt_state *states;
+ int nr_states;
+
+ int debounce_interval;
+
+ unsigned int poll_interval;
+ int (*enable)(struct device *dev);
+ void (*disable)(struct device *dev);
+};
+
+#endif
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
new file mode 100644
index 00000000000..7163d91c037
--- /dev/null
+++ b/include/linux/input/pixcir_ts.h
@@ -0,0 +1,10 @@
+#ifndef _PIXCIR_I2C_TS_H
+#define _PIXCIR_I2C_TS_H
+
+struct pixcir_ts_platform_data {
+ int (*attb_read_val)(void);
+ int x_max;
+ int y_max;
+};
+
+#endif
diff --git a/include/linux/input/samsung-keypad.h b/include/linux/input/samsung-keypad.h
new file mode 100644
index 00000000000..f25619bfd8a
--- /dev/null
+++ b/include/linux/input/samsung-keypad.h
@@ -0,0 +1,43 @@
+/*
+ * Samsung Keypad platform data definitions
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_KEYPAD_H
+#define __SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS 8
+#define SAMSUNG_MAX_COLS 8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned int rows;
+ unsigned int cols;
+ bool no_autorepeat;
+ bool wakeup;
+
+ void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+#endif /* __SAMSUNG_KEYPAD_H */
diff --git a/include/linux/input/tca8418_keypad.h b/include/linux/input/tca8418_keypad.h
new file mode 100644
index 00000000000..e71a85dc2cb
--- /dev/null
+++ b/include/linux/input/tca8418_keypad.h
@@ -0,0 +1,44 @@
+/*
+ * TCA8418 keypad platform support
+ *
+ * Copyright (C) 2011 Fuel7, Inc. All rights reserved.
+ *
+ * Author: Kyle Manna <kyle.manna@fuel7.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License v2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the
+ * Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 021110-1307, USA.
+ *
+ * If you can't comply with GPLv2, alternative licensing terms may be
+ * arranged. Please contact Fuel7, Inc. (http://fuel7.com/) for proprietary
+ * alternative licensing inquiries.
+ */
+
+#ifndef _TCA8418_KEYPAD_H
+#define _TCA8418_KEYPAD_H
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+#define TCA8418_I2C_ADDR 0x34
+#define TCA8418_NAME "tca8418_keypad"
+
+struct tca8418_keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned rows;
+ unsigned cols;
+ bool rep;
+ bool irq_is_gpio;
+};
+
+#endif
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index 5c75153f944..d21b33c4c6c 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -96,13 +96,11 @@ struct ucb1400_gpio {
struct ucb1400_ts {
struct input_dev *ts_idev;
- struct task_struct *ts_task;
int id;
- wait_queue_head_t ts_wait;
- unsigned int ts_restart:1;
int irq;
- unsigned int irq_pending; /* not bit field shared */
struct snd_ac97 *ac97;
+ wait_queue_head_t ts_wait;
+ bool stopped;
};
struct ucb1400 {