Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A small batch of fixes that have trickled in over the last week of the
  merge window.

  Also included are few small devicetree updates for sunxi, since it
  enables me to use one of their newer boards (cubieboard2) for
  additional test coverage.  The support for that SoC is new for 3.12,
  so there's no exposure to new regressions due to it"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: sun7i: olinuxino-micro: Enable the EMAC
  ARM: dts: sun7i: cubieboard2: Enable the EMAC
  ARM: dts: sun7i: Add the muxing options for the EMAC
  ARM: dts: sun7i: Enable the Ethernet in the A20
  i2c: davinci: Fix bad dev_get_platdata() conversion
  ARM: vexpress: allow dcscb and tc2_pm in a combined ARMv6+v7 build
  ARM: shmobile: lager: Do not use register_type field of struct sh_eth_plat_data
  ARM: pxa: ssp: Check return values from phandle lookups
  ARM: PCI: versatile: Fix SMAP register offsets
  ARM: PCI: versatile: Fix PCI I/O
  ARM: PCI: versatile: Fix map_irq function to match hardware
  ARM: ep93xx: Don't use modem interface on the second UART
  ARM: shmobile: r8a7779: Update early timer initialisation order

11 files changed, 108 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 31b76f08b3a..15e625eca31 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -19,6 +19,21 @@
 	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
 		pinctrl@01c20800 {
 			led_pins_cubieboard2: led_pins@0 {
 				allwinner,pins = "PH20", "PH21";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 34a6c02a7c7..9e778557fad 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -19,6 +19,21 @@
 	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
 
 	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
 		pinctrl@01c20800 {
 			led_pins_olinuxino: led_pins@0 {
 				allwinner,pins = "PH2";
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 999ff45cb77..80559cbdbc8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -167,6 +167,22 @@
 		#size-cells = <1>;
 		ranges;
 
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <0 55 1>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio@01c0b080 {
+			compatible = "allwinner,sun4i-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
@@ -198,6 +214,17 @@
 				allwinner,drive = <0>;
 				allwinner,pull = <0>;
 			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <0>;
+				allwinner,pull = <0>;
+			};
 		};
 
 		timer@01c20c00 {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index df8612fbbc9..3f12b885c08 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -281,7 +281,7 @@ static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
 	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
 static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
-	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
+	{ IRQ_EP93XX_UART2 }, NULL);
 
 static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
 	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index 4872939cdba..ffb6f0ac760 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -96,7 +96,6 @@ static struct resource mmcif1_resources[] __initdata = {
 static struct sh_eth_plat_data ether_pdata __initdata = {
 	.phy			= 0x1,
 	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
-	.register_type		= SH_ETH_REG_FAST_RCAR,
 	.phy_interface		= PHY_INTERFACE_MODE_RMII,
 	.ether_link_active_low	= 1,
 };
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index b5b2f787da2..ecd0148ee1e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -691,8 +691,8 @@ void __init __weak r8a7779_register_twd(void) { }
 void __init r8a7779_earlytimer_init(void)
 {
 	r8a7779_clock_init();
-	shmobile_earlytimer_init();
 	r8a7779_register_twd();
+	shmobile_earlytimer_init();
 }
 
 void __init r8a7779_add_early_devices(void)
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
index ec087407b16..6f938ccb0c5 100644
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -231,12 +231,14 @@
 /* PCI space */
 #define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
 #define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_IO_BASE          0x43000000
 #define VERSATILE_PCI_MEM_BASE0        0x44000000
 #define VERSATILE_PCI_MEM_BASE1        0x50000000
 #define VERSATILE_PCI_MEM_BASE2        0x60000000
 /* Sizes of above maps */
 #define VERSATILE_PCI_BASE_SIZE	       0x01000000
 #define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
 #define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
 #define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
 #define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index e92e5e0705b..c97be4ea76d 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -43,9 +43,9 @@
 #define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
 #define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
 #define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
+#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
+#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
 #define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
 
 #define DEVICE_ID_OFFSET		0x00
@@ -170,8 +170,8 @@ static struct pci_ops pci_versatile_ops = {
 	.write	= versatile_write_config,
 };
 
-static struct resource io_mem = {
-	.name	= "PCI I/O space",
+static struct resource unused_mem = {
+	.name	= "PCI unused",
 	.start	= VERSATILE_PCI_MEM_BASE0,
 	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
 	.flags	= IORESOURCE_MEM,
@@ -195,9 +195,9 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 {
 	int ret = 0;
 
-	ret = request_resource(&iomem_resource, &io_mem);
+	ret = request_resource(&iomem_resource, &unused_mem);
 	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate I/O "
+		printk(KERN_ERR "PCI: unable to allocate unused "
 		       "memory region (%d)\n", ret);
 		goto out;
 	}
@@ -205,7 +205,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 	if (ret) {
 		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
 		       "memory region (%d)\n", ret);
-		goto release_io_mem;
+		goto release_unused_mem;
 	}
 	ret = request_resource(&iomem_resource, &pre_mem);
 	if (ret) {
@@ -225,8 +225,8 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
 
  release_non_mem:
 	release_resource(&non_mem);
- release_io_mem:
-	release_resource(&io_mem);
+ release_unused_mem:
+	release_resource(&unused_mem);
  out:
 	return ret;
 }
@@ -246,7 +246,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 		goto out;
 	}
 
-	ret = pci_ioremap_io(0, VERSATILE_PCI_MEM_BASE0);
+	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
 	if (ret)
 		goto out;
 
@@ -295,6 +295,19 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
 	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
 
 	/*
+	 * For many years the kernel and QEMU were symbiotically buggy
+	 * in that they both assumed the same broken IRQ mapping.
+	 * QEMU therefore attempts to auto-detect old broken kernels
+	 * so that they still work on newer QEMU as they did on old
+	 * QEMU. Since we now use the correct (ie matching-hardware)
+	 * IRQ mapping we write a definitely different value to a
+	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
+	 * real hardware behaviour and it need not be backwards
+	 * compatible for us. This write is harmless on real hardware.
+	 */
+	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
+
+	/*
 	 * Do not to map Versatile FPGA PCI device into memory space
 	 */
 	pci_slot_ignore |= (1 << myslot);
@@ -327,13 +340,13 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
-	/* slot,  pin,	irq
-	 *  24     1     IRQ_SIC_PCI0
-	 *  25     1     IRQ_SIC_PCI1
-	 *  26     1     IRQ_SIC_PCI2
-	 *  27     1     IRQ_SIC_PCI3
+	/*
+	 * Slot	INTA	INTB	INTC	INTD
+	 * 31	PCI1	PCI2	PCI3	PCI0
+	 * 30	PCI0	PCI1	PCI2	PCI3
+	 * 29	PCI3	PCI0	PCI1	PCI2
 	 */
-	irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3);
+	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
 
 	return irq;
 }
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 36ea8247123..505e64ab3ea 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -7,6 +7,8 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
+CFLAGS_dcscb.o				+= -march=armv7-a
 obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o spc.o
+CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c83f27b6bdd..3ea02903d75 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -132,6 +132,7 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 	if (dev->of_node) {
 		struct of_phandle_args dma_spec;
 		struct device_node *np = dev->of_node;
+		int ret;
 
 		/*
 		 * FIXME: we should allocate the DMA channel from this
@@ -140,14 +141,23 @@ static int pxa_ssp_probe(struct platform_device *pdev)
 		 */
 
 		/* rx */
-		of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-					   0, &dma_spec);
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 0, &dma_spec);
+
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
 		ssp->drcmr_rx = dma_spec.args[0];
 		of_node_put(dma_spec.np);
 
 		/* tx */
-		of_parse_phandle_with_args(np, "dmas", "#dma-cells",
-					   1, &dma_spec);
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 1, &dma_spec);
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
 		ssp->drcmr_tx = dma_spec.args[0];
 		of_node_put(dma_spec.np);
 	} else {
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 57473415be1..132369fad4e 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -662,7 +662,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 #endif
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
-	dev->pdata = dev_get_platdata(&dev->dev);
+	dev->pdata = dev_get_platdata(&pdev->dev);
 	platform_set_drvdata(pdev, dev);
 
 	if (!dev->pdata && pdev->dev.of_node) {