Merge tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux into next/soc

From Maxime Ripard:
Allwinner SoC support for 3.8

* tag 'tags/sunxi-support-for-3.8' of git://github.com/mripard/linux:
  ARM: sunxi: Add entry to MAINTAINERS
  ARM: sunxi: Add device tree for the A13 and the Olinuxino board
  ARM: sunxi: Add earlyprintk support
  ARM: sunxi: Add basic support for Allwinner A1x SoCs
  irqchip: sunxi: Add irq controller driver
  clocksource: sunxi: Add Allwinner A1X Timer Driver
  clk: sunxi: Add dummy fixed rate clock for Allwinner A1X SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>

26 files changed, 802 insertions, 0 deletions

diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
new file mode 100644
index 00000000000..87a1e8fb624
--- /dev/null
+++ b/Documentation/arm/sunxi/README
@@ -0,0 +1,19 @@
+ARM Allwinner SoCs
+==================
+
+This document lists all the ARM Allwinner SoCs that are currently
+supported in mainline by the Linux kernel. This document will also
+provide links to documentation and or datasheet for these SoCs.
+
+SunXi family
+------------
+
+  Flavors:
+        Allwinner A10 (sun4i)
+                Datasheet       : http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf
+
+        Allwinner A13 (sun5i)
+                Datasheet       : http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+
+  Core: Cortex A8
+  Linux kernel mach directory: arch/arm/mach-sunxi
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt
new file mode 100644
index 00000000000..7f9fb85f545
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt
@@ -0,0 +1,104 @@
+Allwinner Sunxi Interrupt Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sunxi-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+
+0: ENMI
+1: UART0
+2: UART1
+3: UART2
+4: UART3
+5: IR0
+6: IR1
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+13: SPDIF
+14: AC97
+15: TS
+16: I2S
+17: UART4
+18: UART5
+19: UART6
+20: UART7
+21: KEYPAD
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+26: CAN
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: SDMC0
+33: SDMC1
+34: SDMC2
+35: SDMC3
+36: MEMSTICK
+37: NAND
+38: USB0
+39: USB1
+40: USB2
+41: SCR
+42: CSI0
+43: CSI1
+44: LCDCTRL0
+45: LCDCTRL1
+46: MP
+47: DEFEBE0
+48: DEFEBE1
+49: PMU
+50: SPI3
+51: TZASC
+52: PATA
+53: VE
+54: SS
+55: EMAC
+56: SATA
+57: GPS
+58: HDMI
+59: TVE
+60: ACE
+61: TVD
+62: PS2_0
+63: PS2_1
+64: USB3
+65: USB4
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "allwinner,sunxi-ic";
+	reg = <0x01c20400 0x400>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt
new file mode 100644
index 00000000000..0c7b64e95a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt
@@ -0,0 +1,17 @@
+Allwinner A1X SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sunxi-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+- clocks: phandle to the source clock (usually a 24 MHz fixed clock)
+
+Example:
+
+timer {
+	compatible = "allwinner,sunxi-timer";
+	reg = <0x01c20c00 0x400>;
+	interrupts = <22>;
+	clocks = <&osc>;
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 99199e63f34..12bd27e452e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/Allwinner A1X SoC support
+M:	Maxime Ripard <maxime.ripard@free-electrons.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-sunxi/
+
 ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
 M:	Andrew Victor <linux@maxim.org.za>
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1cc4f79e4f..6c1d0198553 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1102,6 +1102,8 @@ source "arch/arm/mach-exynos/Kconfig"
 
 source "arch/arm/mach-shmobile/Kconfig"
 
+source "arch/arm/mach-sunxi/Kconfig"
+
 source "arch/arm/mach-prima2/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5566520686a..4c336c3c4d7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -345,6 +345,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA based platforms.
 
+	config DEBUG_SUNXI_UART1
+		bool "Kernel low-level debugging messages via sunXi UART1"
+		depends on ARCH_SUNXI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Allwinner A1X based platforms on the UART1.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -424,6 +431,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
 	default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
+	default "debug/sunxi.S" if DEBUG_SUNXI_UART1
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
 		DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
 	default "mach/debug-macro.S"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 20891216782..58afa0dfcf7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -194,6 +194,7 @@ machine-$(CONFIG_ARCH_SPEAR13XX)	+= spear13xx
 machine-$(CONFIG_ARCH_SPEAR3XX)		+= spear3xx
 machine-$(CONFIG_MACH_SPEAR600)		+= spear6xx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cc803c92a72..22e4ac9a4e7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear310-evb.dtb \
 	spear320-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts
new file mode 100644
index 00000000000..3b1cce3af7c
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-olinuxino.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun5i.dtsi"
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
+
+	soc {
+		duart: uart@01c28400 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
new file mode 100644
index 00000000000..4bedf3e826e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x01c20000 0x300000>;
+		ranges;
+
+		timer@01c20c00 {
+			compatible = "allwinner,sunxi-timer";
+			reg = <0x01c20c00 0x400>;
+			interrupts = <22>;
+			clocks = <&osc>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sunxi-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		uart1: uart@01c28400 {
+			compatible = "ns8250";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			clock-frequency = <24000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S
new file mode 100644
index 00000000000..3bf61ca0df7
--- /dev/null
+++ b/arch/arm/include/debug/sunxi.S
@@ -0,0 +1,24 @@
+/*
+ * Early serial output macro for Allwinner A1X SoCs
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_DEBUG_SUNXI_UART1
+#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400
+#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400
+#endif
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =SUNXI_UART_DEBUG_PHYS_BASE
+	ldr	\rv, =SUNXI_UART_DEBUG_VIRT_BASE
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
new file mode 100644
index 00000000000..3fdd0085e30
--- /dev/null
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -0,0 +1,9 @@
+config ARCH_SUNXI
+	bool "Allwinner A1X SOCs" if ARCH_MULTI_V7
+	select CLKSRC_MMIO
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	select SPARSE_IRQ
+	select SUNXI_TIMER
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
new file mode 100644
index 00000000000..93bebfc3ff9
--- /dev/null
+++ b/arch/arm/mach-sunxi/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot
new file mode 100644
index 00000000000..46d4cf0841c
--- /dev/null
+++ b/arch/arm/mach-sunxi/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-$(CONFIG_ARCH_SUNXI)	+= 0x40008000
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
new file mode 100644
index 00000000000..8f42df8af1d
--- /dev/null
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -0,0 +1,60 @@
+/*
+ * Device Tree support for Allwinner A1X SoCs
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/sunxi_timer.h>
+
+#include <linux/irqchip/sunxi.h>
+
+#include <asm/hardware/vic.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "sunxi.h"
+
+static struct map_desc sunxi_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) SUNXI_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(SUNXI_REGS_PHYS_BASE),
+		.length		= SUNXI_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init sunxi_map_io(void)
+{
+	iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc));
+}
+
+static void __init sunxi_dt_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const sunxi_board_dt_compat[] = {
+	"allwinner,sun5i",
+	NULL,
+};
+
+DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+	.init_machine	= sunxi_dt_init,
+	.map_io		= sunxi_map_io,
+	.init_irq	= sunxi_init_irq,
+	.handle_irq	= sunxi_handle_irq,
+	.timer		= &sunxi_timer,
+	.dt_compat	= sunxi_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-sunxi/sunxi.h b/arch/arm/mach-sunxi/sunxi.h
new file mode 100644
index 00000000000..33b58712ade
--- /dev/null
+++ b/arch/arm/mach-sunxi/sunxi.h
@@ -0,0 +1,20 @@
+/*
+ * Generic definitions for Allwinner SunXi SoCs
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SUNXI_H
+#define __MACH_SUNXI_H
+
+#define SUNXI_REGS_PHYS_BASE	0x01c00000
+#define SUNXI_REGS_VIRT_BASE	IOMEM(0xf1c00000)
+#define SUNXI_REGS_SIZE		(SZ_2M + SZ_1M)
+
+#endif /* __MACH_SUNXI_H */
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 71a25b91de0..9c300a828ed 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -19,6 +19,7 @@ endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
+obj-$(CONFIG_ARCH_SUNXI)	+= clk-sunxi.o
 
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c
new file mode 100644
index 00000000000..0e831b584ba
--- /dev/null
+++ b/drivers/clk/clk-sunxi.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+
+static const __initconst struct of_device_id clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{}
+};
+
+void __init sunxi_init_clocks(void)
+{
+	of_clk_init(clk_match);
+}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 6a78073c380..a0985732f1e 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -22,6 +22,9 @@ config DW_APB_TIMER_OF
 config ARMADA_370_XP_TIMER
 	bool
 
+config SUNXI_TIMER
+	bool
+
 config CLKSRC_DBX500_PRCMU
 	bool "Clocksource PRCMU Timer"
 	depends on UX500_SOC_DB8500
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 603be366f76..36f06de4c5a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
+obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 
 obj-$(CONFIG_CLKSRC_ARM_GENERIC)	+= arm_generic.o
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
new file mode 100644
index 00000000000..3c46434b64c
--- /dev/null
+++ b/drivers/clocksource/sunxi_timer.c
@@ -0,0 +1,170 @@
+/*
+ * Allwinner A1X SoCs timer handling.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Benn Huang <benn@allwinnertech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sunxi_timer.h>
+#include <linux/clk/sunxi.h>
+
+#define TIMER_CTL_REG		0x00
+#define TIMER_CTL_ENABLE		(1 << 0)
+#define TIMER_IRQ_ST_REG	0x04
+#define TIMER0_CTL_REG		0x10
+#define TIMER0_CTL_ENABLE		(1 << 0)
+#define TIMER0_CTL_AUTORELOAD		(1 << 1)
+#define TIMER0_CTL_ONESHOT		(1 << 7)
+#define TIMER0_INTVAL_REG	0x14
+#define TIMER0_CNTVAL_REG	0x18
+
+#define TIMER_SCAL		16
+
+static void __iomem *timer_base;
+
+static void sunxi_clkevt_mode(enum clock_event_mode mode,
+			      struct clock_event_device *clk)
+{
+	u32 u = readl(timer_base + TIMER0_CTL_REG);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		u &= ~(TIMER0_CTL_ONESHOT);
+		writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG);
+		break;
+	}
+}
+
+static int sunxi_clkevt_next_event(unsigned long evt,
+				   struct clock_event_device *unused)
+{
+	u32 u = readl(timer_base + TIMER0_CTL_REG);
+	writel(evt, timer_base + TIMER0_CNTVAL_REG);
+	writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD,
+	       timer_base + TIMER0_CTL_REG);
+
+	return 0;
+}
+
+static struct clock_event_device sunxi_clockevent = {
+	.name = "sunxi_tick",
+	.shift = 32,
+	.rating = 300,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = sunxi_clkevt_mode,
+	.set_next_event = sunxi_clkevt_next_event,
+};
+
+
+static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+	writel(0x1, timer_base + TIMER_IRQ_ST_REG);
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction sunxi_timer_irq = {
+	.name = "sunxi_timer0",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = sunxi_timer_interrupt,
+	.dev_id = &sunxi_clockevent,
+};
+
+static struct of_device_id sunxi_timer_dt_ids[] = {
+	{ .compatible = "allwinner,sunxi-timer" },
+};
+
+static void __init sunxi_timer_init(void)
+{
+	struct device_node *node;
+	unsigned long rate = 0;
+	struct clk *clk;
+	int ret, irq;
+	u32 val;
+
+	node = of_find_matching_node(NULL, sunxi_timer_dt_ids);
+	if (!node)
+		panic("No sunxi timer node");
+
+	timer_base = of_iomap(node, 0);
+	if (!timer_base)
+		panic("Can't map registers");
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (irq <= 0)
+		panic("Can't parse IRQ");
+
+	sunxi_init_clocks();
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk))
+		panic("Can't get timer clock");
+
+	rate = clk_get_rate(clk);
+
+	writel(rate / (TIMER_SCAL * HZ),
+	       timer_base + TIMER0_INTVAL_REG);
+
+	/* set clock source to HOSC, 16 pre-division */
+	val = readl(timer_base + TIMER0_CTL_REG);
+	val &= ~(0x07 << 4);
+	val &= ~(0x03 << 2);
+	val |= (4 << 4) | (1 << 2);
+	writel(val, timer_base + TIMER0_CTL_REG);
+
+	/* set mode to auto reload */
+	val = readl(timer_base + TIMER0_CTL_REG);
+	writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG);
+
+	ret = setup_irq(irq, &sunxi_timer_irq);
+	if (ret)
+		pr_warn("failed to setup irq %d\n", irq);
+
+	/* Enable timer0 interrupt */
+	val = readl(timer_base + TIMER_CTL_REG);
+	writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
+
+	sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
+				NSEC_PER_SEC,
+				sunxi_clockevent.shift);
+	sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
+							    &sunxi_clockevent);
+	sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
+							    &sunxi_clockevent);
+	sunxi_clockevent.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&sunxi_clockevent);
+}
+
+struct sys_timer sunxi_timer = {
+	.init = sunxi_timer_init,
+};
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index e2e6eb5d32f..02bd37a6187 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
+obj-$(CONFIG_ARCH_SUNXI)   += irq-sunxi.o
 obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c
new file mode 100644
index 00000000000..eef41a49aca
--- /dev/null
+++ b/drivers/irqchip/irq-sunxi.c
@@ -0,0 +1,150 @@
+/*
+ * Allwinner A1X SoCs IRQ chip driver.
+ *
+ * Copyright (C) 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Benn Huang <benn@allwinnertech.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <linux/irqchip/sunxi.h>
+
+#define SUNXI_IRQ_VECTOR_REG		0x00
+#define SUNXI_IRQ_PROTECTION_REG	0x08
+#define SUNXI_IRQ_NMI_CTRL_REG		0x0c
+#define SUNXI_IRQ_PENDING_REG(x)	(0x10 + 0x4 * x)
+#define SUNXI_IRQ_FIQ_PENDING_REG(x)	(0x20 + 0x4 * x)
+#define SUNXI_IRQ_ENABLE_REG(x)		(0x40 + 0x4 * x)
+#define SUNXI_IRQ_MASK_REG(x)		(0x50 + 0x4 * x)
+
+static void __iomem *sunxi_irq_base;
+static struct irq_domain *sunxi_irq_domain;
+
+void sunxi_irq_ack(struct irq_data *irqd)
+{
+	unsigned int irq = irqd_to_hwirq(irqd);
+	unsigned int irq_off = irq % 32;
+	int reg = irq / 32;
+	u32 val;
+
+	val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));
+	writel(val | (1 << irq_off),
+	       sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg));
+}
+
+static void sunxi_irq_mask(struct irq_data *irqd)
+{
+	unsigned int irq = irqd_to_hwirq(irqd);
+	unsigned int irq_off = irq % 32;
+	int reg = irq / 32;
+	u32 val;
+
+	val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
+	writel(val & ~(1 << irq_off),
+	       sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
+}
+
+static void sunxi_irq_unmask(struct irq_data *irqd)
+{
+	unsigned int irq = irqd_to_hwirq(irqd);
+	unsigned int irq_off = irq % 32;
+	int reg = irq / 32;
+	u32 val;
+
+	val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
+	writel(val | (1 << irq_off),
+	       sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg));
+}
+
+static struct irq_chip sunxi_irq_chip = {
+	.name		= "sunxi_irq",
+	.irq_ack	= sunxi_irq_ack,
+	.irq_mask	= sunxi_irq_mask,
+	.irq_unmask	= sunxi_irq_unmask,
+};
+
+static int sunxi_irq_map(struct irq_domain *d, unsigned int virq,
+			 irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(virq, &sunxi_irq_chip,
+				 handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops sunxi_irq_ops = {
+	.map = sunxi_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int __init sunxi_of_init(struct device_node *node,
+				struct device_node *parent)
+{
+	sunxi_irq_base = of_iomap(node, 0);
+	if (!sunxi_irq_base)
+		panic("%s: unable to map IC registers\n",
+			node->full_name);
+
+	/* Disable all interrupts */
+	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0));
+	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1));
+	writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2));
+
+	/* Mask all the interrupts */
+	writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0));
+	writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1));
+	writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2));
+
+	/* Clear all the pending interrupts */
+	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0));
+	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1));
+	writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2));
+
+	/* Enable protection mode */
+	writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG);
+
+	/* Configure the external interrupt source type */
+	writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG);
+
+	sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32,
+						 &sunxi_irq_ops, NULL);
+	if (!sunxi_irq_domain)
+		panic("%s: unable to create IRQ domain\n", node->full_name);
+
+	return 0;
+}
+
+static struct of_device_id sunxi_irq_dt_ids[] __initconst = {
+	{ .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init }
+};
+
+void __init sunxi_init_irq(void)
+{
+	of_irq_init(sunxi_irq_dt_ids);
+}
+
+asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs)
+{
+	u32 irq, hwirq;
+
+	hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2;
+	while (hwirq != 0) {
+		irq = irq_find_mapping(sunxi_irq_domain, hwirq);
+		handle_IRQ(irq, regs);
+		hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2;
+	}
+}
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
new file mode 100644
index 00000000000..e074fdd5a23
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif
diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h
new file mode 100644
index 00000000000..1fe2c2260e2
--- /dev/null
+++ b/include/linux/irqchip/sunxi.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_IRQCHIP_SUNXI_H
+#define __LINUX_IRQCHIP_SUNXI_H
+
+#include <asm/exception.h>
+
+extern void sunxi_init_irq(void);
+
+extern asmlinkage void __exception_irq_entry sunxi_handle_irq(
+	struct pt_regs *regs);
+
+#endif
diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h
new file mode 100644
index 00000000000..b9165bba6e6
--- /dev/null
+++ b/include/linux/sunxi_timer.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SUNXI_TIMER_H
+#define __SUNXI_TIMER_H
+
+#include <asm/mach/time.h>
+
+extern struct sys_timer sunxi_timer;
+
+#endif