aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorOctavian Purdila <opurdila@ixiacom.com>2009-12-26 11:50:59 +0000
committerDavid S. Miller <davem@davemloft.net>2009-12-26 20:38:23 -0800
commitbf9ae5386bca8836c16e69ab8fdbe46767d7452a (patch)
tree1184d7062dd74f7ad2b85379a5bd40ab5b8ca4d6
parentf83d664eef180478c2dc0a0099e9d7bc1c8177ff (diff)
llc: use dev_hard_header
Using dev_hard_header allows us to use LLC with VLANs and potentially other Ethernet/TokernRing specific encapsulations. It also removes code duplication between LLC and Ethernet/TokenRing core code. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/myri_sbus.c6
-rw-r--r--net/8021q/vlan_dev.c7
-rw-r--r--net/ethernet/eth.c6
-rw-r--r--net/llc/llc_output.c45
4 files changed, 17 insertions, 47 deletions
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index b3513ad3b70..8b431308535 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -716,10 +716,10 @@ static int myri_header(struct sk_buff *skb, struct net_device *dev,
pad[0] = MYRI_PAD_LEN;
pad[1] = 0xab;
- /* Set the protocol type. For a packet of type ETH_P_802_3 we put the length
- * in here instead. It is up to the 802.2 layer to carry protocol information.
+ /* Set the protocol type. For a packet of type ETH_P_802_3/2 we put the
+ * length in here instead.
*/
- if (type != ETH_P_802_3)
+ if (type != ETH_P_802_3 && type != ETH_P_802_2)
eth->h_proto = htons(type);
else
eth->h_proto = htons(len);
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index b7889782047..77a49ffdd0e 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -263,11 +263,10 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
vhdr->h_vlan_TCI = htons(vlan_tci);
/*
- * Set the protocol type. For a packet of type ETH_P_802_3 we
- * put the length in here instead. It is up to the 802.2
- * layer to carry protocol information.
+ * Set the protocol type. For a packet of type ETH_P_802_3/2 we
+ * put the length in here instead.
*/
- if (type != ETH_P_802_3)
+ if (type != ETH_P_802_3 && type != ETH_P_802_2)
vhdr->h_vlan_encapsulated_proto = htons(type);
else
vhdr->h_vlan_encapsulated_proto = htons(len);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index dd3db88f8f0..205a1c12f3c 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -73,8 +73,8 @@ __setup("ether=", netdev_boot_setup);
* @len: packet length (<= skb->len)
*
*
- * Set the protocol type. For a packet of type ETH_P_802_3 we put the length
- * in here instead. It is up to the 802.2 layer to carry protocol information.
+ * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length
+ * in here instead.
*/
int eth_header(struct sk_buff *skb, struct net_device *dev,
unsigned short type,
@@ -82,7 +82,7 @@ int eth_header(struct sk_buff *skb, struct net_device *dev,
{
struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN);
- if (type != ETH_P_802_3)
+ if (type != ETH_P_802_3 && type != ETH_P_802_2)
eth->h_proto = htons(type);
else
eth->h_proto = htons(len);
diff --git a/net/llc/llc_output.c b/net/llc/llc_output.c
index 754f4fedc85..b38a1079a98 100644
--- a/net/llc/llc_output.c
+++ b/net/llc/llc_output.c
@@ -33,48 +33,19 @@
int llc_mac_hdr_init(struct sk_buff *skb,
const unsigned char *sa, const unsigned char *da)
{
- int rc = 0;
+ int rc = -EINVAL;
switch (skb->dev->type) {
-#ifdef CONFIG_TR
- case ARPHRD_IEEE802_TR: {
- struct net_device *dev = skb->dev;
- struct trh_hdr *trh;
-
- skb_push(skb, sizeof(*trh));
- skb_reset_mac_header(skb);
- trh = tr_hdr(skb);
- trh->ac = AC;
- trh->fc = LLC_FRAME;
- if (sa)
- memcpy(trh->saddr, sa, dev->addr_len);
- else
- memset(trh->saddr, 0, dev->addr_len);
- if (da) {
- memcpy(trh->daddr, da, dev->addr_len);
- tr_source_route(skb, trh, dev);
- skb_reset_mac_header(skb);
- }
- break;
- }
-#endif
+ case ARPHRD_IEEE802_TR:
case ARPHRD_ETHER:
- case ARPHRD_LOOPBACK: {
- unsigned short len = skb->len;
- struct ethhdr *eth;
-
- skb_push(skb, sizeof(*eth));
- skb_reset_mac_header(skb);
- eth = eth_hdr(skb);
- eth->h_proto = htons(len);
- memcpy(eth->h_dest, da, ETH_ALEN);
- memcpy(eth->h_source, sa, ETH_ALEN);
+ case ARPHRD_LOOPBACK:
+ rc = dev_hard_header(skb, skb->dev, ETH_P_802_2, da, sa,
+ skb->len);
+ if (rc > 0)
+ rc = 0;
break;
- }
default:
- printk(KERN_WARNING "device type not supported: %d\n",
- skb->dev->type);
- rc = -EINVAL;
+ WARN(1, "device type not supported: %d\n", skb->dev->type);
}
return rc;
}