aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-08-15 08:38:38 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-09-29 17:20:25 +0200
commit2262054e74b4b26ed56a8535c1259f6c6c2862a4 (patch)
treefbcd0aa7879408b9676c2df6c7514e5d7428880a
parent06b3a1d12f41b592972643f8b84015d6c03dc576 (diff)
pcmcia: remove obsolete and wrong comments
What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-rw-r--r--drivers/ide/ide-cs.c45
-rw-r--r--drivers/isdn/hardware/avm/avm_cs.c51
-rw-r--r--drivers/isdn/hisax/avma1_cs.c57
-rw-r--r--drivers/isdn/hisax/elsa_cs.c55
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c84
-rw-r--r--drivers/isdn/hisax/teles_cs.c62
-rw-r--r--drivers/mtd/maps/pcmciamtd.c21
-rw-r--r--drivers/net/pcmcia/3c574_cs.c23
-rw-r--r--drivers/net/pcmcia/3c589_cs.c35
-rw-r--r--drivers/net/pcmcia/axnet_cs.c33
-rw-r--r--drivers/net/pcmcia/com20020_cs.c33
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c33
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c28
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c42
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c33
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c53
-rw-r--r--drivers/net/wireless/airo_cs.c71
-rw-r--r--drivers/net/wireless/atmel_cs.c69
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c8
-rw-r--r--drivers/net/wireless/libertas/if_cs.c30
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c44
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c44
-rw-r--r--drivers/net/wireless/ray_cs.c35
-rw-r--r--drivers/net/wireless/wl3501_cs.c35
-rw-r--r--drivers/parport/parport_cs.c33
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c26
-rw-r--r--drivers/serial/serial_cs.c32
-rw-r--r--drivers/staging/comedi/drivers/cb_das16_cs.c5
-rw-r--r--drivers/staging/comedi/drivers/das08_cs.c68
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_700.c61
-rw-r--r--drivers/staging/comedi/drivers/ni_daq_dio24.c61
-rw-r--r--drivers/staging/comedi/drivers/ni_labpc_cs.c75
-rw-r--r--drivers/staging/comedi/drivers/quatech_daqp_cs.c64
-rw-r--r--drivers/staging/wlags49_h2/wl_cs.c61
-rw-r--r--drivers/staging/wlags49_h2/wl_main.c19
35 files changed, 3 insertions, 1526 deletions
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 54702cc8e0d..404843e8611 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -71,17 +71,6 @@ static int ide_config(struct pcmcia_device *);
static void ide_detach(struct pcmcia_device *p_dev);
-
-
-
-/*======================================================================
-
- ide_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int ide_probe(struct pcmcia_device *link)
{
ide_info_t *info;
@@ -102,15 +91,6 @@ static int ide_probe(struct pcmcia_device *link)
return ide_config(link);
} /* ide_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void ide_detach(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
@@ -184,14 +164,6 @@ out_release:
return NULL;
}
-/*======================================================================
-
- ide_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ide device available to the system.
-
-======================================================================*/
-
static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
{
int *is_kme = priv_data;
@@ -275,14 +247,6 @@ failed:
return -ENODEV;
} /* ide_config */
-/*======================================================================
-
- After a card is removed, ide_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void ide_release(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
@@ -308,15 +272,6 @@ static void ide_release(struct pcmcia_device *link)
} /* ide_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the ide drivers from
- talking to the ports.
-
-======================================================================*/
-
static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_FUNC_ID(4),
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index b172361bbef..91f06a3ef00 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -38,38 +38,10 @@ MODULE_LICENSE("GPL");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avmcs_config(struct pcmcia_device *link);
static void avmcs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avmcs_detach(struct pcmcia_device *p_dev);
-/*======================================================================
-
- avmcs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int avmcs_probe(struct pcmcia_device *p_dev)
{
/* General socket configuration */
@@ -80,28 +52,12 @@ static int avmcs_probe(struct pcmcia_device *p_dev)
return avmcs_config(p_dev);
} /* avmcs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
static void avmcs_detach(struct pcmcia_device *link)
{
avmcs_release(link);
} /* avmcs_detach */
-/*======================================================================
-
- avmcs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -185,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link)
} /* avmcs_config */
-/*======================================================================
-
- After a card is removed, avmcs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
static void avmcs_release(struct pcmcia_device *link)
{
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 62616c871c7..ac4dd7857cb 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -39,39 +39,10 @@ module_param(isdnprot, int, 0);
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the skeleton event
- handler.
-*/
-
static int avma1cs_config(struct pcmcia_device *link) __devinit ;
static void avma1cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
-
-/*======================================================================
-
- avma1cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
{
dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
@@ -84,15 +55,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
return avma1cs_config(p_dev);
} /* avma1cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit avma1cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
@@ -100,14 +62,6 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* avma1cs_detach */
-/*======================================================================
-
- avma1cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->end = 16;
@@ -180,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
return 0;
} /* avma1cs_config */
-/*======================================================================
-
- After a card is removed, avma1cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void avma1cs_release(struct pcmcia_device *link)
{
unsigned long minor = (unsigned long) link->priv;
@@ -200,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* avma1cs_release */
-
static struct pcmcia_device_id avma1cs_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb),
PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b),
@@ -216,8 +161,6 @@ static struct pcmcia_driver avma1cs_driver = {
.id_table = avma1cs_ids,
};
-/*====================================================================*/
-
static int __init init_avma1_cs(void)
{
return pcmcia_register_driver(&avma1cs_driver);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index 2d439a79fd8..496d477af0f 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -63,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the elsa_cs event
- handler.
-*/
-
static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
static void elsa_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +73,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- elsa_cs_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -121,15 +91,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
return elsa_cs_config(link);
} /* elsa_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -142,14 +103,6 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link)
kfree(info);
} /* elsa_cs_detach */
-/*======================================================================
-
- elsa_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -215,14 +168,6 @@ failed:
return -ENODEV;
} /* elsa_cs_config */
-/*======================================================================
-
- After a card is removed, elsa_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void elsa_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9e5c4fd0867..360204bc277 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -63,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the sedlbauer
- event handler.
-*/
-
static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
static void sedlbauer_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
typedef struct local_info_t {
@@ -91,18 +74,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- sedlbauer_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -117,30 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
-
- /* from old sedl_cs
- */
- /* The io structure describes IO port mapping */
-
return sedlbauer_config(link);
} /* sedlbauer_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit sedlbauer_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
@@ -152,13 +102,6 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* sedlbauer_detach */
-/*======================================================================
-
- sedlbauer_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -168,8 +111,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
return pcmcia_request_io(p_dev);
}
-
-
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
int ret;
@@ -180,27 +121,10 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,14 +152,6 @@ failed:
} /* sedlbauer_config */
-/*======================================================================
-
- After a card is removed, sedlbauer_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void sedlbauer_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 82f09b86484..282a4467ef1 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -44,26 +44,8 @@ MODULE_LICENSE("GPL");
static int protocol = 2; /* EURO-ISDN Default */
module_param(protocol, int, 0);
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card insertion
- and ejection events. They are invoked from the teles_cs event
- handler.
-*/
-
static int teles_cs_config(struct pcmcia_device *link) __devinit ;
static void teles_cs_release(struct pcmcia_device *link);
-
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
typedef struct local_info_t {
@@ -72,18 +54,6 @@ typedef struct local_info_t {
int cardnr;
} local_info_t;
-/*======================================================================
-
- teles_attach() creates an "instance" of the driver, allocatingx
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int __devinit teles_probe(struct pcmcia_device *link)
{
local_info_t *local;
@@ -98,27 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link)
local->p_dev = link;
link->priv = local;
- /*
- General socket configuration defaults can go here. In this
- client, we assume very little, and rely on the CIS for almost
- everything. In most clients, many details (i.e., number, sizes,
- and attributes of IO windows) are fixed by the nature of the
- device, and can be hard-wired here.
- */
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
return teles_cs_config(link);
} /* teles_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void __devexit teles_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
@@ -131,14 +85,6 @@ static void __devexit teles_detach(struct pcmcia_device *link)
kfree(info);
} /* teles_detach */
-/*======================================================================
-
- teles_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int j;
@@ -204,14 +150,6 @@ cs_failed:
return -ENODEV;
} /* teles_cs_config */
-/*======================================================================
-
- After a card is removed, teles_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void teles_cs_release(struct pcmcia_device *link)
{
local_info_t *local = link->priv;
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 5df89e742a3..57a1acfe22c 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -321,11 +321,6 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on)
}
-/* After a card is removed, pcmciamtd_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
-
static void pcmciamtd_release(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -475,11 +470,6 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev
}
-/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * MTD device available to the system.
- */
-
static int pcmciamtd_config(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -676,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev)
}
-/* This deletes a driver "instance". The device is de-registered
- * with Card Services. If it has been released, all local data
- * structures are freed. Otherwise, the structures will be freed
- * when the device is released.
- */
-
static void pcmciamtd_detach(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev = link->priv;
@@ -699,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link)
}
-/* pcmciamtd_attach() creates an "instance" of the driver, allocating
- * local data structures for one device. The device is registered
- * with Card Services.
- */
-
static int pcmciamtd_probe(struct pcmcia_device *link)
{
struct pcmciamtd_dev *dev;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index ba52b0b6d93..ff824e11f0b 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -287,16 +287,7 @@ static int tc574_probe(struct pcmcia_device *link)
dev->watchdog_timeo = TX_TIMEOUT;
return tc574_config(link);
-} /* tc574_attach */
-
-/*
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-*/
+}
static void tc574_detach(struct pcmcia_device *link)
{
@@ -311,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link)
free_netdev(dev);
} /* tc574_detach */
-/*
- tc574_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-*/
-
static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
static int tc574_config(struct pcmcia_device *link)
@@ -463,12 +448,6 @@ failed:
} /* tc574_config */
-/*
- After a card is removed, tc574_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-*/
-
static void tc574_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 551759c25a7..a07e2229533 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -175,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops;
static void tc589_detach(struct pcmcia_device *p_dev);
-/*======================================================================
-
- tc589_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static const struct net_device_ops el3_netdev_ops = {
.ndo_open = el3_open,
.ndo_stop = el3_close,
@@ -224,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link)
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
return tc589_config(link);
-} /* tc589_attach */
-
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
+}
static void tc589_detach(struct pcmcia_device *link)
{
@@ -248,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link)
free_netdev(dev);
} /* tc589_detach */
-/*======================================================================
-
- tc589_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int tc589_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -350,14 +325,6 @@ failed:
return -ENODEV;
} /* tc589_config */
-/*======================================================================
-
- After a card is removed, tc589_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void tc589_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index fb5a39ba480..9e8b28b271a 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -139,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- axnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int axnet_probe(struct pcmcia_device *link)
{
axnet_dev_t *info;
@@ -175,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
return axnet_config(link);
} /* axnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void axnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -246,14 +229,6 @@ static int get_prom(struct pcmcia_device *link)
return 1;
} /* get_prom */
-/*======================================================================
-
- axnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -392,14 +367,6 @@ failed:
return -ENODEV;
} /* axnet_config */
-/*======================================================================
-
- After a card is removed, axnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void axnet_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index a5d918ea5b1..b706a724947 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -122,14 +122,6 @@ typedef struct com20020_dev_t {
struct net_device *dev;
} com20020_dev_t;
-/*======================================================================
-
- com20020_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int com20020_probe(struct pcmcia_device *p_dev)
{
com20020_dev_t *info;
@@ -172,15 +164,6 @@ fail_alloc_info:
return -ENOMEM;
} /* com20020_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void com20020_detach(struct pcmcia_device *link)
{
struct com20020_dev_t *info = link->priv;
@@ -219,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link)
} /* com20020_detach */
-/*======================================================================
-
- com20020_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int com20020_config(struct pcmcia_device *link)
{
struct arcnet_local *lp;
@@ -314,14 +289,6 @@ failed:
return -ENODEV;
} /* com20020_config */
-/*======================================================================
-
- After a card is removed, com20020_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void com20020_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "com20020_release\n");
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index d3c9f016f79..bf7dff96d88 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -121,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
return tok_interrupt(irq, dev);
};
-/*======================================================================
-
- ibmtr_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int __devinit ibmtr_attach(struct pcmcia_device *link)
{
ibmtr_dev_t *info;
@@ -161,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link)
return ibmtr_config(link);
} /* ibmtr_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void ibmtr_detach(struct pcmcia_device *link)
{
struct ibmtr_dev_t *info = link->priv;
@@ -194,14 +177,6 @@ static void ibmtr_detach(struct pcmcia_device *link)
kfree(info);
} /* ibmtr_detach */
-/*======================================================================
-
- ibmtr_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- token-ring device available to the system.
-
-======================================================================*/
-
static int __devinit ibmtr_config(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
@@ -297,14 +272,6 @@ failed:
return -ENODEV;
} /* ibmtr_config */
-/*======================================================================
-
- After a card is removed, ibmtr_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void ibmtr_release(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 8e5730c42ce..1eca4f5a6e7 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -434,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/* ----------------------------------------------------------------------------
-nmclan_attach
- Creates an "instance" of the driver, allocating local data
- structures for one device. The device is registered with Card
- Services.
----------------------------------------------------------------------------- */
-
static int nmclan_probe(struct pcmcia_device *link)
{
mace_private *lp;
@@ -472,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link)
return nmclan_config(link);
} /* nmclan_attach */
-/* ----------------------------------------------------------------------------
-nmclan_detach
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
----------------------------------------------------------------------------- */
-
static void nmclan_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -623,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
return 0;
} /* mace_init */
-/* ----------------------------------------------------------------------------
-nmclan_config
- This routine is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
----------------------------------------------------------------------------- */
-
static int nmclan_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -710,12 +688,6 @@ failed:
return -ENODEV;
} /* nmclan_config */
-/* ----------------------------------------------------------------------------
-nmclan_release
- After a card is removed, nmclan_release() will unregister the
- net device, and release the PCMCIA configuration. If the device
- is still open, this will be postponed until it is closed.
----------------------------------------------------------------------------- */
static void nmclan_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "nmclan_release\n");
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 22987e6a685..5d7d1d3088a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -237,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = {
#endif
};
-/*======================================================================
-
- pcnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int pcnet_probe(struct pcmcia_device *link)
{
pcnet_dev_t *info;
@@ -266,15 +258,6 @@ static int pcnet_probe(struct pcmcia_device *link)
return pcnet_config(link);
} /* pcnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void pcnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -461,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link)
return &default_info;
} /* get_hwired */
-/*======================================================================
-
- pcnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -665,14 +640,6 @@ failed:
return -ENODEV;
} /* pcnet_config */
-/*======================================================================
-
- After a card is removed, pcnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void pcnet_release(struct pcmcia_device *link)
{
pcnet_dev_t *info = PRIV(link->priv);
@@ -685,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
-======================================================================*/
-
static int pcnet_suspend(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index e4c4fb62657..0af2fc8ec16 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -299,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- smc91c92_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int smc91c92_probe(struct pcmcia_device *link)
{
struct smc_private *smc;
@@ -338,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link)
return smc91c92_config(link);
} /* smc91c92_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void smc91c92_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -819,14 +802,6 @@ static int check_sig(struct pcmcia_device *link)
return -ENODEV;
}
-/*======================================================================
-
- smc91c92_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int smc91c92_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -977,14 +952,6 @@ config_failed:
return -ENODEV;
} /* smc91c92_config */
-/*======================================================================
-
- After a card is removed, smc91c92_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void smc91c92_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "smc91c92_release\n");
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 18cdc84a84b..1fece617c06 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -266,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
unsigned data, int len);
-/*
- * The event() function is this driver's Card Services event handler.
- * It will be called by Card Services when an appropriate card status
- * event is received. The config() and release() entry points are
- * used to configure or release a socket, in response to card insertion
- * and ejection events. They are invoked from the event handler.
- */
-
static int has_ce2_string(struct pcmcia_device * link);
static int xirc2ps_config(struct pcmcia_device * link);
static void xirc2ps_release(struct pcmcia_device * link);
-
-/****************
- * The attach() and detach() entry points are used to create and destroy
- * "instances" of the driver, where each instance represents everything
- * needed to manage one actual PCMCIA card.
- */
-
static void xirc2ps_detach(struct pcmcia_device *p_dev);
-/****************
- * You'll also need to prototype all the functions that will actually
- * be used to talk to your device. See 'pcmem_cs' for a good example
- * of a fully self-sufficient driver; the other drivers rely more or
- * less on other parts of the kernel.
- */
-
static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
typedef struct local_info_t {
@@ -500,16 +478,6 @@ static const struct net_device_ops netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/****************
- * xirc2ps_attach() creates an "instance" of the driver, allocating
- * local data structures for one device. The device is registered
- * with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-
static int
xirc2ps_probe(struct pcmcia_device *link)
{
@@ -539,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link)
return xirc2ps_config(link);
} /* xirc2ps_attach */
-/****************
- * This deletes a driver "instance". The device is de-registered
- * with Card Services. If it has been released, all local data
- * structures are freed. Otherwise, the structures will be freed
- * when the device is released.
- */
-
static void
xirc2ps_detach(struct pcmcia_device *link)
{
@@ -733,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
};
-/****************
- * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
- * is received, to configure the PCMCIA socket, and to make the
- * ethernet device available to the system.
- */
static int
xirc2ps_config(struct pcmcia_device * link)
{
@@ -861,10 +817,6 @@ xirc2ps_config(struct pcmcia_device * link)
if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
goto config_error;
- /****************
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping.
- */
link->config_flags |= CONF_ENABLE_IRQ;
if (do_sound)
link->config_flags |= CONF_ENABLE_SPKR;
@@ -980,11 +932,6 @@ xirc2ps_config(struct pcmcia_device * link)
return -ENODEV;
} /* xirc2ps_config */
-/****************
- * After a card is removed, xirc2ps_release() will unregister the net
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
xirc2ps_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index b084278f36b..df2484d4547 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -53,42 +53,15 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the airo_cs
- event handler.
-*/
-
static int airo_config(struct pcmcia_device *link);
static void airo_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void airo_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- airo_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -106,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
return airo_config(p_dev);
} /* airo_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void airo_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_detach\n");
@@ -129,14 +93,6 @@ static void airo_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* airo_detach */
-/*======================================================================
-
- airo_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +114,6 @@ static int airo_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -179,11 +121,6 @@ static int airo_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -200,14 +137,6 @@ static int airo_config(struct pcmcia_device *link)
return -ENODEV;
} /* airo_config */
-/*======================================================================
-
- After a card is removed, airo_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void airo_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_release\n");
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index fabe91a8db2..c96e19da294 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -63,42 +63,15 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the atmel_cs
- event handler.
-*/
-
static int atmel_config(struct pcmcia_device *link);
static void atmel_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void atmel_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- atmel_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -116,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
return atmel_config(p_dev);
} /* atmel_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void atmel_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "atmel_detach\n");
@@ -134,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link)
kfree(link->priv);
}
-/*======================================================================
-
- atmel_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -176,18 +132,6 @@ static int atmel_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
@@ -196,11 +140,6 @@ static int atmel_config(struct pcmcia_device *link)
goto failed;
}
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -223,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link)
return -ENODEV;
}
-/*======================================================================
-
- After a card is removed, atmel_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ba645701179..bd8a4134ede 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-
static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed_unlock;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed_unlock;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index c2bd2f0304b..ff1280f4133 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -760,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv,
}
-/********************************************************************/
-/* Card Services */
-/********************************************************************/
-
-/*
- * After a card is removed, if_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void if_cs_release(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
@@ -784,16 +775,6 @@ static void if_cs_release(struct pcmcia_device *p_dev)
}
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.
- */
-
static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -849,11 +830,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
}
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(p_dev);
if (ret) {
lbs_pr_err("error in pcmcia_enable_device\n");
@@ -950,12 +926,6 @@ out:
}
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void if_cs_detach(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 2b1f554af0b..71b3d68b940 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -92,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
orinoco_cs_probe(struct pcmcia_device *link)
{
@@ -119,12 +111,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void orinoco_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -136,12 +122,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* orinoco_cs_detach */
-/*
- * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +138,6 @@ orinoco_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -199,11 +165,6 @@ orinoco_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* orinoco_cs_config */
-/*
- * After a card is removed, orinoco_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
orinoco_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 1314cf204f1..fb859a5ad2e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -153,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
spectrum_cs_probe(struct pcmcia_device *link)
{
@@ -181,12 +173,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void spectrum_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -198,12 +184,6 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* spectrum_cs_detach */
-/*
- * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -221,20 +201,6 @@ spectrum_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -263,11 +229,6 @@ spectrum_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -296,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* spectrum_cs_config */
-/*
- * After a card is removed, spectrum_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
spectrum_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b5a2c9e31de..af5b17ce5a1 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -168,13 +168,6 @@ static int bc;
*/
static char *phy_addr = NULL;
-
-/* A struct pcmcia_device structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a struct pcmcia_device structure can be used to point to
- a device-specific private data structure, like this.
-*/
static unsigned int ray_mem_speed = 500;
/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
@@ -289,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*=============================================================================
- ray_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-=============================================================================*/
static int ray_probe(struct pcmcia_device *p_dev)
{
ray_dev_t *local;
@@ -351,12 +336,6 @@ fail_alloc_dev:
return -ENOMEM;
} /* ray_attach */
-/*=============================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-=============================================================================*/
static void ray_detach(struct pcmcia_device *link)
{
struct net_device *dev;
@@ -379,11 +358,6 @@ static void ray_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
-/*=============================================================================
- ray_config() is run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-=============================================================================*/
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
@@ -409,9 +383,6 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- /* This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -771,11 +742,7 @@ static void join_net(u_long data)
local->card_status = CARD_DOING_ACQ;
}
-/*============================================================================
- After a card is removed, ray_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-=============================================================================*/
+
static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index d3ed38f558f..ca3f8961fa2 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -77,13 +77,6 @@
#define WL3501_RESUME 0
#define WL3501_SUSPEND 1
-/*
- * The event() function is this driver's Card Services event handler. It will
- * be called by Card Services when an appropriate card status event is
- * received. The config() and release() entry points are used to configure or
- * release a socket, in response to card insertion and ejection events. They
- * are invoked from the wl24 event handler.
- */
static int wl3501_config(struct pcmcia_device *link);
static void wl3501_release(struct pcmcia_device *link);
@@ -1868,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/**
- * wl3501_attach - creates an "instance" of the driver
- *
- * Creates an "instance" of the driver, allocating local data structures for
- * one device. The device is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually configure the
- * card at this point -- we wait until we receive a card insertion event.
- */
static int wl3501_probe(struct pcmcia_device *p_dev)
{
struct net_device *dev;
@@ -1912,14 +1896,6 @@ out_link:
return -ENOMEM;
}
-/**
- * wl3501_config - configure the PCMCIA socket and make eth device available
- * @link - FILL_IN
- *
- * wl3501_config() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- */
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -1950,9 +1926,6 @@ static int wl3501_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /* This actually configures the PCMCIA socket -- setting up the I/O
- * windows and the interrupt mapping. */
-
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -2008,14 +1981,6 @@ failed:
return -ENODEV;
}
-/**
- * wl3501_release - unregister the net, release PCMCIA configuration
- * @arg - link
- *
- * After a card is removed, wl3501_release() will unregister the net device,
- * and release the PCMCIA configuration. If the device is still open, this
- * will be postponed until it is closed.
- */
static void wl3501_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 6f4c9560b2b..787ebdeae31 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -80,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev);
static int parport_config(struct pcmcia_device *link);
static void parport_cs_release(struct pcmcia_device *);
-/*======================================================================
-
- parport_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int parport_probe(struct pcmcia_device *link)
{
parport_info_t *info;
@@ -105,15 +97,6 @@ static int parport_probe(struct pcmcia_device *link)
return parport_config(link);
} /* parport_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void parport_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "parport_detach\n");
@@ -123,14 +106,6 @@ static void parport_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* parport_detach */
-/*======================================================================
-
- parport_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- parport device available to the system.
-
-======================================================================*/
-
static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -187,14 +162,6 @@ failed:
return -ENODEV;
} /* parport_config */
-/*======================================================================
-
- After a card is removed, parport_cs_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void parport_cs_release(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 07b73ca2a7e..9326c2c1488 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1530,15 +1530,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt)
PCMCIA functions
**********************************************************************/
-/*======================================================================
- nsp_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-======================================================================*/
static int nsp_cs_probe(struct pcmcia_device *link)
{
scsi_info_t *info;
@@ -1563,12 +1554,6 @@ static int nsp_cs_probe(struct pcmcia_device *link)
} /* nsp_cs_attach */
-/*======================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-======================================================================*/
static void nsp_cs_detach(struct pcmcia_device *link)
{
nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link);
@@ -1581,12 +1566,6 @@ static void nsp_cs_detach(struct pcmcia_device *link)
} /* nsp_cs_detach */
-/*======================================================================
- nsp_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-======================================================================*/
-
static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
nsp_hw_data *data = priv_data;
@@ -1697,11 +1676,6 @@ static int nsp_cs_config(struct pcmcia_device *link)
} /* nsp_cs_config */
-/*======================================================================
- After a card is removed, nsp_cs_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-======================================================================*/
static void nsp_cs_release(struct pcmcia_device *link)
{
scsi_info_t *info = link->priv;
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 5047224d262..649ce543327 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -262,13 +262,6 @@ static const struct serial_quirk quirks[] = {
static int serial_config(struct pcmcia_device * link);
-/*======================================================================
-
- After a card is removed, serial_remove() will unregister
- the serial device(s), and release the PCMCIA configuration.
-
-======================================================================*/
-
static void serial_remove(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -311,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link)
return 0;
}
-/*======================================================================
-
- serial_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int serial_probe(struct pcmcia_device *link)
{
struct serial_info *info;
@@ -339,15 +324,6 @@ static int serial_probe(struct pcmcia_device *link)
return serial_config(link);
}
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void serial_detach(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
@@ -631,14 +607,6 @@ static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
}
-/*======================================================================
-
- serial_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- serial device available to the system.
-
-======================================================================*/
-
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index a885cd7cfd7..0345b4caba7 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -736,11 +736,6 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index def167eac1d..0b32a2df776 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -114,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link);
static int das08_pcmcia_suspend(struct pcmcia_device *p_dev);
static int das08_pcmcia_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int das08_pcmcia_attach(struct pcmcia_device *);
static void das08_pcmcia_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- das08_pcmcia_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int das08_pcmcia_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -168,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link)
return 0;
} /* das08_pcmcia_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void das08_pcmcia_detach(struct pcmcia_device *link)
{
@@ -200,15 +166,6 @@ static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
return pcmcia_request_io(p_dev);
}
-
-/*======================================================================
-
- das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static void das08_pcmcia_config(struct pcmcia_device *link)
{
int ret;
@@ -226,11 +183,6 @@ static void das08_pcmcia_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -242,32 +194,12 @@ failed:
} /* das08_pcmcia_config */
-/*======================================================================
-
- After a card is removed, das08_pcmcia_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void das08_pcmcia_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "das08_pcmcia_release\n");
pcmcia_disable_device(link);
} /* das08_pcmcia_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int das08_pcmcia_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index 9cc8401765b..fc772a8a55c 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -434,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev)
return 0;
};
-/* PCMCIA crap -- watch your words, please! */
-
static void dio700_config(struct pcmcia_device *link);
static void dio700_release(struct pcmcia_device *link);
static int dio700_cs_suspend(struct pcmcia_device *p_dev);
static int dio700_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int dio700_cs_attach(struct pcmcia_device *);
static void dio700_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- dio700_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int dio700_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -497,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link)
return 0;
} /* dio700_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void dio700_cs_detach(struct pcmcia_device *link)
{
@@ -521,14 +485,6 @@ static void dio700_cs_detach(struct pcmcia_device *link)
} /* dio700_cs_detach */
-/*======================================================================
-
- dio700_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -559,11 +515,6 @@ static void dio700_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret != 0)
goto failed;
@@ -583,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* dio700_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int dio700_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index b3f7c66e25c..c9c28584db6 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -186,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev)
return 0;
};
-/* PCMCIA crap -- watch your words! */
-
static void dio24_config(struct pcmcia_device *link);
static void dio24_release(struct pcmcia_device *link);
static int dio24_cs_suspend(struct pcmcia_device *p_dev);
static int dio24_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int dio24_cs_attach(struct pcmcia_device *);
static void dio24_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- dio24_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int dio24_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -249,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link)
return 0;
} /* dio24_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void dio24_cs_detach(struct pcmcia_device *link)
{
@@ -273,14 +237,6 @@ static void dio24_cs_detach(struct pcmcia_device *link)
} /* dio24_cs_detach */
-/*======================================================================
-
- dio24_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -310,11 +266,6 @@ static void dio24_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -334,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* dio24_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int dio24_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 6b7c5d043b0..6facbc8bf77 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -152,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
return labpc_common_attach(dev, iobase, irq, 0);
}
-/*====================================================================*/
-
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the dummy
- event handler.
-
- Kernel version 2.6.16 upwards uses suspend() and resume() functions
- instead of an event() function.
-*/
-
static void labpc_config(struct pcmcia_device *link);
static void labpc_release(struct pcmcia_device *link);
static int labpc_cs_suspend(struct pcmcia_device *p_dev);
static int labpc_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int labpc_cs_attach(struct pcmcia_device *);
static void labpc_cs_detach(struct pcmcia_device *);
-/*
- You'll also need to prototype all the functions that will actually
- be used to talk to your device. See 'memory_cs' for a good example
- of a fully self-sufficient driver; the other drivers rely more or
- less on other parts of the kernel.
-*/
-
struct local_info_t {
struct pcmcia_device *link;
int stop;
struct bus_operations *bus;
};
-/*======================================================================
-
- labpc_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int labpc_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -225,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link)
return 0;
} /* labpc_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void labpc_cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "labpc_cs_detach\n");
@@ -252,14 +204,6 @@ static void labpc_cs_detach(struct pcmcia_device *link)
} /* labpc_cs_detach */
-/*======================================================================
-
- labpc_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -288,11 +232,6 @@ static void labpc_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -311,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* labpc_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int labpc_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
@@ -340,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link)
return 0;
} /* labpc_cs_resume */
-/*====================================================================*/
-
static struct pcmcia_device_id labpc_cs_ids[] = {
/* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */
PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 32fecf57868..ebba9bb4777 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -968,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev)
======================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events.
-
- Kernel version 2.6.16 upwards uses suspend() and resume() functions
- instead of an event() function.
-*/
-
static void daqp_cs_config(struct pcmcia_device *link);
static void daqp_cs_release(struct pcmcia_device *link);
static int daqp_cs_suspend(struct pcmcia_device *p_dev);
static int daqp_cs_resume(struct pcmcia_device *p_dev);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static int daqp_cs_attach(struct pcmcia_device *);
static void daqp_cs_detach(struct pcmcia_device *);
-/*======================================================================
-
- daqp_cs_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
-======================================================================*/
-
static int daqp_cs_attach(struct pcmcia_device *link)
{
struct local_info_t *local;
@@ -1035,15 +1006,6 @@ static int daqp_cs_attach(struct pcmcia_device *link)
return 0;
} /* daqp_cs_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void daqp_cs_detach(struct pcmcia_device *link)
{
struct local_info_t *dev = link->priv;
@@ -1059,15 +1021,6 @@ static void daqp_cs_detach(struct pcmcia_device *link)
} /* daqp_cs_detach */
-/*======================================================================
-
- daqp_cs_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
-======================================================================*/
-
-
static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -1094,11 +1047,6 @@ static void daqp_cs_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -1117,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link)
pcmcia_disable_device(link);
} /* daqp_cs_release */
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
-======================================================================*/
-
static int daqp_cs_suspend(struct pcmcia_device *link)
{
struct local_info_t *local = link->priv;
diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c
index aa3cc516fe1..6555891e149 100644
--- a/drivers/staging/wlags49_h2/wl_cs.c
+++ b/drivers/staging/wlags49_h2/wl_cs.c
@@ -163,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link)
-/*******************************************************************************
- * wl_adapter_detach()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * This deletes a driver "instance". The device is de-registered with Card
- * Services. If it has been released, then the net device is unregistered, and
- * all local data structures are freed. Otherwise, the structures will be
- * freed when the device is released.
- *
- * PARAMETERS:
- *
- * link - pointer to the dev_link_t structure representing the device to
- * detach
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
static void wl_adapter_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -207,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link)
/*============================================================================*/
-/*******************************************************************************
- * wl_adapter_release()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * After a card is removed, this routine will release the PCMCIA
- * configuration. If the device is still open, this will be postponed until it
- * is closed.
- *
- * PARAMETERS:
- *
- * arg - a u_long representing a pointer to a dev_link_t structure for the
- * device to be released.
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
void wl_adapter_release(struct pcmcia_device *link)
{
DBG_FUNC("wl_adapter_release");
@@ -266,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link)
return 0;
} /* wl_adapter_resume */
-/*******************************************************************************
- * wl_adapter_insert()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- *
- * PARAMETERS:
- *
- * link - pointer to the dev_link_t structure representing the device to
- * insert
- *
- * RETURNS:
- *
- * N/A
- *
- ******************************************************************************/
void wl_adapter_insert(struct pcmcia_device *link)
{
struct net_device *dev;
diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c
index 88d0d472142..8e3536acbf4 100644
--- a/drivers/staging/wlags49_h2/wl_main.c
+++ b/drivers/staging/wlags49_h2/wl_main.c
@@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded
#endif /* HCF_STA */
-/*******************************************************************************
- * wl_insert()
- *******************************************************************************
- *
- * DESCRIPTION:
- *
- * wl_insert() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- *
- * PARAMETERS:
- *
- * dev - a pointer to the net_device struct of the wireless device
- *
- * RETURNS:
- *
- * TRUE or FALSE
- *
- ******************************************************************************/
int wl_insert( struct net_device *dev )
{
int result = 0;