aboutsummaryrefslogtreecommitdiff
path: root/Documentation/DMA-API.txt
diff options
context:
space:
mode:
authorJoerg Roedel <joerg.roedel@amd.com>2009-01-09 16:28:07 +0100
committerJoerg Roedel <joerg.roedel@amd.com>2009-03-17 12:56:47 +0100
commit187f9c3f05373df4f7cbae2e656450acdbba7558 (patch)
tree23ecd35781ccf5507201702d0627af019a333f4c /Documentation/DMA-API.txt
parent2118d0c548e8a2205e1a29eb5b89e5f2e9ae2c8b (diff)
dma-debug: Documentation update
Impact: add documentation about DMA-API debugging to DMA-API.txt Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Diffstat (limited to 'Documentation/DMA-API.txt')
-rw-r--r--Documentation/DMA-API.txt106
1 files changed, 106 insertions, 0 deletions
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 2a3fcc55e98..d9aa43d78bc 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -609,3 +609,109 @@ size is the size (and should be a page-sized multiple).
The return value will be either a pointer to the processor virtual
address of the memory, or an error (via PTR_ERR()) if any part of the
region is occupied.
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above as some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this:
+
+------------[ cut here ]------------
+WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+ check_unmap+0x203/0x490()
+Hardware name:
+forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+ function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+single] [unmapped as page]
+Modules linked in: nfsd exportfs bridge stp llc r8169
+Pid: 0, comm: swapper Tainted: G W 2.6.28-dmatest-09289-g8bb99c0 #1
+Call Trace:
+ <IRQ> [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+ [<ffffffff80647b70>] _spin_unlock+0x10/0x30
+ [<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+ [<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+ [<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+ [<ffffffff80252f96>] queue_work+0x56/0x60
+ [<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+ [<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+ [<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+ [<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+ [<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+ [<ffffffff803c7ea3>] check_unmap+0x203/0x490
+ [<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+ [<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+ [<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+ [<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+ [<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+ [<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+ [<ffffffff8020c093>] ret_from_intr+0x0/0xa
+ <EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+ dma-api/all_errors This file contains a numeric value. If this
+ value is not equal to zero the debugging code
+ will print a warning for every error it finds
+ into the kernel log. Be carefull with this
+ option. It can easily flood your logs.
+
+ dma-api/disabled This read-only file contains the character 'Y'
+ if the debugging code is disabled. This can
+ happen when it runs out of memory or if it was
+ disabled at boot time
+
+ dma-api/error_count This file is read-only and shows the total
+ numbers of errors found.
+
+ dma-api/num_errors The number in this file shows how many
+ warnings will be printed to the kernel log
+ before it stops. This number is initialized to
+ one at system boot and be set by writing into
+ this file
+
+ dma-api/min_free_entries
+ This read-only file can be read to get the
+ minimum number of free dma_debug_entries the
+ allocator has ever seen. If this value goes
+ down to zero the code will disable itself
+ because it is not longer reliable.
+
+ dma-api/num_free_entries
+ The current number of free dma_debug_entries
+ in the allocator.
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries. These entries are preallocated at boot. The number
+of preallocated entries is defined per architecture. If it is too low for you
+boot with 'dma_debug_entries=<your_desired_number>' to overwrite the
+architectural default.