Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...

1 files changed, 45 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index ded0398d3bd..a4873e5e3e3 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -3,17 +3,58 @@
 Required properties:
 - compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
 - reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+  If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>.  The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
 
 Supported chips:
 imx23, imx28.
 
 Examples:
-dma-apbh@80004000 {
+
+dma_apbh: dma-apbh@80004000 {
 	compatible = "fsl,imx28-dma-apbh";
-	reg = <0x80004000 2000>;
+	reg = <0x80004000 0x2000>;
+	interrupts = <82 83 84 85
+		      88 88 88 88
+		      88 88 88 88
+		      87 86 0 0>;
+	interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+			  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+			  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+			  "hsadc", "lcdif", "empty", "empty";
+	#dma-cells = <1>;
+	dma-channels = <16>;
 };
 
-dma-apbx@80024000 {
+dma_apbx: dma-apbx@80024000 {
 	compatible = "fsl,imx28-dma-apbx";
-	reg = <0x80024000 2000>;
+	reg = <0x80024000 0x2000>;
+	interrupts = <78 79 66 0
+		      80 81 68 69
+		      70 71 72 73
+		      74 75 76 77>;
+	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+			  "saif0", "saif1", "i2c0", "i2c1",
+			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+	#dma-cells = <1>;
+	dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112>;
+	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+	dma-names = "rx", "tx";
 };