gpio: palmas: add dt support

Add of_device_id table for Palma GPIO to be enable the
driver from DT file.

The driver can be registered from DT file as:
	palmas: tps65913@58 {
		:::::::::::
		palmas_gpio: palmas_gpio {
			compatible = "ti,palmas-gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};
	};

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 27 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
new file mode 100644
index 00000000000..08b5b52a3ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
@@ -0,0 +1,27 @@
+Palmas GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,palams-gpio" for palma series of the GPIO controller
+  - "ti,tps80036-gpio" for Palma series device TPS80036.
+  - "ti,tps65913-gpio" for palma series device TPS65913.
+  - "ti,tps65914-gpio" for palma series device TPS65914.
+- #gpio-cells : Should be two.
+  - first cell is the gpio pin number
+  - second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Note: This gpio node will be sub node of palmas node.
+
+Example:
+	palmas: tps65913@58 {
+		:::::::::::
+		palmas_gpio: palmas_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		:::::::::::
+	};