documentation/devicetree: Move DT bindings from gpio to watchdog

I accidently put the devicetree bindings for the MEN A21 watchdog driver in
Documentation/devicetree/bindings/gpio instead of
Documentation/devicetree/bindings/watchdog, this patch addresses this error.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Rob Landley <rob@landley.net>

1 files changed, 0 insertions, 25 deletions

diff --git a/Documentation/devicetree/bindings/gpio/men-a021-wdt.txt b/Documentation/devicetree/bindings/gpio/men-a021-wdt.txt
deleted file mode 100644
index 370dee3226d..00000000000
--- a/Documentation/devicetree/bindings/gpio/men-a021-wdt.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Bindings for MEN A21 Watchdog device connected to GPIO lines
-
-Required properties:
-- compatible: "men,a021-wdt"
-- gpios: Specifies the pins that control the Watchdog, order:
-  1: Watchdog enable
-  2: Watchdog fast-mode
-  3: Watchdog trigger
-  4: Watchdog reset cause bit 0
-  5: Watchdog reset cause bit 1
-  6: Watchdog reset cause bit 2
-
-Optional properties:
-- None
-
-Example:
-	watchdog {
-		compatible ="men,a021-wdt";
-		gpios = <&gpio3 9  1	/* WD_EN */
-			 &gpio3 10 1	/* WD_FAST */
-			 &gpio3 11 1	/* WD_TRIG */
-			 &gpio3 6  1	/* RST_CAUSE[0] */
-			 &gpio3 7  1	/* RST_CAUSE[1] */
-			 &gpio3 8  1>;	/* RST_CAUSE[2] */
-	};