aboutsummaryrefslogtreecommitdiff
path: root/Documentation/filesystems/spufs.txt
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2005-11-15 15:53:48 -0500
committerPaul Mackerras <paulus@samba.org>2006-01-09 14:49:12 +1100
commit67207b9664a8d603138ef1556141e6d0a102bea7 (patch)
treee98886778be65aeb6625a5f516873bbc5beeb978 /Documentation/filesystems/spufs.txt
parentd7a301033f1990188f65abf4fe8e5b90ef0e3888 (diff)
[PATCH] spufs: The SPU file system, base
This is the current version of the spu file system, used for driving SPEs on the Cell Broadband Engine. This release is almost identical to the version for the 2.6.14 kernel posted earlier, which is available as part of the Cell BE Linux distribution from http://www.bsc.es/projects/deepcomputing/linuxoncell/. The first patch provides all the interfaces for running spu application, but does not have any support for debugging SPU tasks or for scheduling. Both these functionalities are added in the subsequent patches. See Documentation/filesystems/spufs.txt on how to use spufs. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'Documentation/filesystems/spufs.txt')
-rw-r--r--Documentation/filesystems/spufs.txt521
1 files changed, 521 insertions, 0 deletions
diff --git a/Documentation/filesystems/spufs.txt b/Documentation/filesystems/spufs.txt
new file mode 100644
index 00000000000..8edc3952eff
--- /dev/null
+++ b/Documentation/filesystems/spufs.txt
@@ -0,0 +1,521 @@
+SPUFS(2) Linux Programmer's Manual SPUFS(2)
+
+
+
+NAME
+ spufs - the SPU file system
+
+
+DESCRIPTION
+ The SPU file system is used on PowerPC machines that implement the Cell
+ Broadband Engine Architecture in order to access Synergistic Processor
+ Units (SPUs).
+
+ The file system provides a name space similar to posix shared memory or
+ message queues. Users that have write permissions on the file system
+ can use spu_create(2) to establish SPU contexts in the spufs root.
+
+ Every SPU context is represented by a directory containing a predefined
+ set of files. These files can be used for manipulating the state of the
+ logical SPU. Users can change permissions on those files, but not actu-
+ ally add or remove files.
+
+
+MOUNT OPTIONS
+ uid=<uid>
+ set the user owning the mount point, the default is 0 (root).
+
+ gid=<gid>
+ set the group owning the mount point, the default is 0 (root).
+
+
+FILES
+ The files in spufs mostly follow the standard behavior for regular sys-
+ tem calls like read(2) or write(2), but often support only a subset of
+ the operations supported on regular file systems. This list details the
+ supported operations and the deviations from the behaviour in the
+ respective man pages.
+
+ All files that support the read(2) operation also support readv(2) and
+ all files that support the write(2) operation also support writev(2).
+ All files support the access(2) and stat(2) family of operations, but
+ only the st_mode, st_nlink, st_uid and st_gid fields of struct stat
+ contain reliable information.
+
+ All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera-
+ tions, but will not be able to grant permissions that contradict the
+ possible operations, e.g. read access on the wbox file.
+
+ The current set of files is:
+
+
+ /mem
+ the contents of the local storage memory of the SPU. This can be
+ accessed like a regular shared memory file and contains both code and
+ data in the address space of the SPU. The possible operations on an
+ open mem file are:
+
+ read(2), pread(2), write(2), pwrite(2), lseek(2)
+ These operate as documented, with the exception that seek(2),
+ write(2) and pwrite(2) are not supported beyond the end of the
+ file. The file size is the size of the local storage of the SPU,
+ which normally is 256 kilobytes.
+
+ mmap(2)
+ Mapping mem into the process address space gives access to the
+ SPU local storage within the process address space. Only
+ MAP_SHARED mappings are allowed.
+
+
+ /mbox
+ The first SPU to CPU communication mailbox. This file is read-only and
+ can be read in units of 32 bits. The file can only be used in non-
+ blocking mode and it even poll() will not block on it. The possible
+ operations on an open mbox file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. If there is no data available in the mail
+ box, the return value is set to -1 and errno becomes EAGAIN.
+ When data has been read successfully, four bytes are placed in
+ the data buffer and the value four is returned.
+
+
+ /ibox
+ The second SPU to CPU communication mailbox. This file is similar to
+ the first mailbox file, but can be read in blocking I/O mode, and the
+ poll familiy of system calls can be used to wait for it. The possible
+ operations on an open ibox file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. If there is no data available in the mail
+ box and the file descriptor has been opened with O_NONBLOCK, the
+ return value is set to -1 and errno becomes EAGAIN.
+
+ If there is no data available in the mail box and the file
+ descriptor has been opened without O_NONBLOCK, the call will
+ block until the SPU writes to its interrupt mailbox channel.
+ When data has been read successfully, four bytes are placed in
+ the data buffer and the value four is returned.
+
+ poll(2)
+ Poll on the ibox file returns (POLLIN | POLLRDNORM) whenever
+ data is available for reading.
+
+
+ /wbox
+ The CPU to SPU communation mailbox. It is write-only can can be written
+ in units of 32 bits. If the mailbox is full, write() will block and
+ poll can be used to wait for it becoming empty again. The possible
+ operations on an open wbox file are: write(2) If a count smaller than
+ four is requested, write returns -1 and sets errno to EINVAL. If there
+ is no space available in the mail box and the file descriptor has been
+ opened with O_NONBLOCK, the return value is set to -1 and errno becomes
+ EAGAIN.
+
+ If there is no space available in the mail box and the file descriptor
+ has been opened without O_NONBLOCK, the call will block until the SPU
+ reads from its PPE mailbox channel. When data has been read success-
+ fully, four bytes are placed in the data buffer and the value four is
+ returned.
+
+ poll(2)
+ Poll on the ibox file returns (POLLOUT | POLLWRNORM) whenever
+ space is available for writing.
+
+
+ /mbox_stat
+ /ibox_stat
+ /wbox_stat
+ Read-only files that contain the length of the current queue, i.e. how
+ many words can be read from mbox or ibox or how many words can be
+ written to wbox without blocking. The files can be read only in 4-byte
+ units and return a big-endian binary integer number. The possible
+ operations on an open *box_stat file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the number of elements that can be
+ read from (for mbox_stat and ibox_stat) or written to (for
+ wbox_stat) the respective mail box without blocking or resulting
+ in EAGAIN.
+
+
+ /npc
+ /decr
+ /decr_status
+ /spu_tag_mask
+ /event_mask
+ /srr0
+ Internal registers of the SPU. The representation is an ASCII string
+ with the numeric value of the next instruction to be executed. These
+ can be used in read/write mode for debugging, but normal operation of
+ programs should not rely on them because access to any of them except
+ npc requires an SPU context save and is therefore very inefficient.
+
+ The contents of these files are:
+
+ npc Next Program Counter
+
+ decr SPU Decrementer
+
+ decr_status Decrementer Status
+
+ spu_tag_mask MFC tag mask for SPU DMA
+
+ event_mask Event mask for SPU interrupts
+
+ srr0 Interrupt Return address register
+
+
+ The possible operations on an open npc, decr, decr_status,
+ spu_tag_mask, event_mask or srr0 file are:
+
+ read(2)
+ When the count supplied to the read call is shorter than the
+ required length for the pointer value plus a newline character,
+ subsequent reads from the same file descriptor will result in
+ completing the string, regardless of changes to the register by
+ a running SPU task. When a complete string has been read, all
+ subsequent read operations will return zero bytes and a new file
+ descriptor needs to be opened to read the value again.
+
+ write(2)
+ A write operation on the file results in setting the register to
+ the value given in the string. The string is parsed from the
+ beginning to the first non-numeric character or the end of the
+ buffer. Subsequent writes to the same file descriptor overwrite
+ the previous setting.
+
+
+ /fpcr
+ This file gives access to the Floating Point Status and Control Regis-
+ ter as a four byte long file. The operations on the fpcr file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the current value of the fpcr regis-
+ ter.
+
+ write(2)
+ If a count smaller than four is requested, write returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is copied
+ from the data buffer, updating the value of the fpcr register.
+
+
+ /signal1
+ /signal2
+ The two signal notification channels of an SPU. These are read-write
+ files that operate on a 32 bit word. Writing to one of these files
+ triggers an interrupt on the SPU. The value writting to the signal
+ files can be read from the SPU through a channel read or from host user
+ space through the file. After the value has been read by the SPU, it
+ is reset to zero. The possible operations on an open signal1 or sig-
+ nal2 file are:
+
+ read(2)
+ If a count smaller than four is requested, read returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is placed in
+ the data buffer, containing the current value of the specified
+ signal notification register.
+
+ write(2)
+ If a count smaller than four is requested, write returns -1 and
+ sets errno to EINVAL. Otherwise, a four byte value is copied
+ from the data buffer, updating the value of the specified signal
+ notification register. The signal notification register will
+ either be replaced with the input data or will be updated to the
+ bitwise OR or the old value and the input data, depending on the
+ contents of the signal1_type, or signal2_type respectively,
+ file.
+
+
+ /signal1_type
+ /signal2_type
+ These two files change the behavior of the signal1 and signal2 notifi-
+ cation files. The contain a numerical ASCII string which is read as
+ either "1" or "0". In mode 0 (overwrite), the hardware replaces the
+ contents of the signal channel with the data that is written to it. in
+ mode 1 (logical OR), the hardware accumulates the bits that are subse-
+ quently written to it. The possible operations on an open signal1_type
+ or signal2_type file are:
+
+ read(2)
+ When the count supplied to the read call is shorter than the
+ required length for the digit plus a newline character, subse-
+ quent reads from the same file descriptor will result in com-
+ pleting the string. When a complete string has been read, all
+ subsequent read operations will return zero bytes and a new file
+ descriptor needs to be opened to read the value again.
+
+ write(2)
+ A write operation on the file results in setting the register to
+ the value given in the string. The string is parsed from the
+ beginning to the first non-numeric character or the end of the
+ buffer. Subsequent writes to the same file descriptor overwrite
+ the previous setting.
+
+
+EXAMPLES
+ /etc/fstab entry
+ none /spu spufs gid=spu 0 0
+
+
+AUTHORS
+ Arnd Bergmann <arndb@de.ibm.com>, Mark Nutter <mnutter@us.ibm.com>,
+ Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_create(2), spu_run(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPUFS(2)
+
+------------------------------------------------------------------------------
+
+SPU_RUN(2) Linux Programmer's Manual SPU_RUN(2)
+
+
+
+NAME
+ spu_run - execute an spu context
+
+
+SYNOPSIS
+ #include <sys/spu.h>
+
+ int spu_run(int fd, unsigned int *npc, unsigned int *event);
+
+DESCRIPTION
+ The spu_run system call is used on PowerPC machines that implement the
+ Cell Broadband Engine Architecture in order to access Synergistic Pro-
+ cessor Units (SPUs). It uses the fd that was returned from spu_cre-
+ ate(2) to address a specific SPU context. When the context gets sched-
+ uled to a physical SPU, it starts execution at the instruction pointer
+ passed in npc.
+
+ Execution of SPU code happens synchronously, meaning that spu_run does
+ not return while the SPU is still running. If there is a need to exe-
+ cute SPU code in parallel with other code on either the main CPU or
+ other SPUs, you need to create a new thread of execution first, e.g.
+ using the pthread_create(3) call.
+
+ When spu_run returns, the current value of the SPU instruction pointer
+ is written back to npc, so you can call spu_run again without updating
+ the pointers.
+
+ event can be a NULL pointer or point to an extended status code that
+ gets filled when spu_run returns. It can be one of the following con-
+ stants:
+
+ SPE_EVENT_DMA_ALIGNMENT
+ A DMA alignment error
+
+ SPE_EVENT_SPE_DATA_SEGMENT
+ A DMA segmentation error
+
+ SPE_EVENT_SPE_DATA_STORAGE
+ A DMA storage error
+
+ If NULL is passed as the event argument, these errors will result in a
+ signal delivered to the calling process.
+
+RETURN VALUE
+ spu_run returns the value of the spu_status register or -1 to indicate
+ an error and set errno to one of the error codes listed below. The
+ spu_status register value contains a bit mask of status codes and
+ optionally a 14 bit code returned from the stop-and-signal instruction
+ on the SPU. The bit masks for the status codes are:
+
+ 0x02 SPU was stopped by stop-and-signal.
+
+ 0x04 SPU was stopped by halt.
+
+ 0x08 SPU is waiting for a channel.
+
+ 0x10 SPU is in single-step mode.
+
+ 0x20 SPU has tried to execute an invalid instruction.
+
+ 0x40 SPU has tried to access an invalid channel.
+
+ 0x3fff0000
+ The bits masked with this value contain the code returned from
+ stop-and-signal.
+
+ There are always one or more of the lower eight bits set or an error
+ code is returned from spu_run.
+
+ERRORS
+ EAGAIN or EWOULDBLOCK
+ fd is in non-blocking mode and spu_run would block.
+
+ EBADF fd is not a valid file descriptor.
+
+ EFAULT npc is not a valid pointer or status is neither NULL nor a valid
+ pointer.
+
+ EINTR A signal occured while spu_run was in progress. The npc value
+ has been updated to the new program counter value if necessary.
+
+ EINVAL fd is not a file descriptor returned from spu_create(2).
+
+ ENOMEM Insufficient memory was available to handle a page fault result-
+ ing from an MFC direct memory access.
+
+ ENOSYS the functionality is not provided by the current system, because
+ either the hardware does not provide SPUs or the spufs module is
+ not loaded.
+
+
+NOTES
+ spu_run is meant to be used from libraries that implement a more
+ abstract interface to SPUs, not to be used from regular applications.
+ See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec-
+ ommended libraries.
+
+
+CONFORMING TO
+ This call is Linux specific and only implemented by the ppc64 architec-
+ ture. Programs using this system call are not portable.
+
+
+BUGS
+ The code does not yet fully implement all features lined out here.
+
+
+AUTHOR
+ Arnd Bergmann <arndb@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_create(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPU_RUN(2)
+
+------------------------------------------------------------------------------
+
+SPU_CREATE(2) Linux Programmer's Manual SPU_CREATE(2)
+
+
+
+NAME
+ spu_create - create a new spu context
+
+
+SYNOPSIS
+ #include <sys/types.h>
+ #include <sys/spu.h>
+
+ int spu_create(const char *pathname, int flags, mode_t mode);
+
+DESCRIPTION
+ The spu_create system call is used on PowerPC machines that implement
+ the Cell Broadband Engine Architecture in order to access Synergistic
+ Processor Units (SPUs). It creates a new logical context for an SPU in
+ pathname and returns a handle to associated with it. pathname must
+ point to a non-existing directory in the mount point of the SPU file
+ system (spufs). When spu_create is successful, a directory gets cre-
+ ated on pathname and it is populated with files.
+
+ The returned file handle can only be passed to spu_run(2) or closed,
+ other operations are not defined on it. When it is closed, all associ-
+ ated directory entries in spufs are removed. When the last file handle
+ pointing either inside of the context directory or to this file
+ descriptor is closed, the logical SPU context is destroyed.
+
+ The parameter flags can be zero or any bitwise or'd combination of the
+ following constants:
+
+ SPU_RAWIO
+ Allow mapping of some of the hardware registers of the SPU into
+ user space. This flag requires the CAP_SYS_RAWIO capability, see
+ capabilities(7).
+
+ The mode parameter specifies the permissions used for creating the new
+ directory in spufs. mode is modified with the user's umask(2) value
+ and then used for both the directory and the files contained in it. The
+ file permissions mask out some more bits of mode because they typically
+ support only read or write access. See stat(2) for a full list of the
+ possible mode values.
+
+
+RETURN VALUE
+ spu_create returns a new file descriptor. It may return -1 to indicate
+ an error condition and set errno to one of the error codes listed
+ below.
+
+
+ERRORS
+ EACCESS
+ The current user does not have write access on the spufs mount
+ point.
+
+ EEXIST An SPU context already exists at the given path name.
+
+ EFAULT pathname is not a valid string pointer in the current address
+ space.
+
+ EINVAL pathname is not a directory in the spufs mount point.
+
+ ELOOP Too many symlinks were found while resolving pathname.
+
+ EMFILE The process has reached its maximum open file limit.
+
+ ENAMETOOLONG
+ pathname was too long.
+
+ ENFILE The system has reached the global open file limit.
+
+ ENOENT Part of pathname could not be resolved.
+
+ ENOMEM The kernel could not allocate all resources required.
+
+ ENOSPC There are not enough SPU resources available to create a new
+ context or the user specific limit for the number of SPU con-
+ texts has been reached.
+
+ ENOSYS the functionality is not provided by the current system, because
+ either the hardware does not provide SPUs or the spufs module is
+ not loaded.
+
+ ENOTDIR
+ A part of pathname is not a directory.
+
+
+
+NOTES
+ spu_create is meant to be used from libraries that implement a more
+ abstract interface to SPUs, not to be used from regular applications.
+ See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec-
+ ommended libraries.
+
+
+FILES
+ pathname must point to a location beneath the mount point of spufs. By
+ convention, it gets mounted in /spu.
+
+
+CONFORMING TO
+ This call is Linux specific and only implemented by the ppc64 architec-
+ ture. Programs using this system call are not portable.
+
+
+BUGS
+ The code does not yet fully implement all features lined out here.
+
+
+AUTHOR
+ Arnd Bergmann <arndb@de.ibm.com>
+
+SEE ALSO
+ capabilities(7), close(2), spu_run(2), spufs(7)
+
+
+
+Linux 2005-09-28 SPU_CREATE(2)