aboutsummaryrefslogtreecommitdiff
path: root/Documentation/fmc
diff options
context:
space:
mode:
authorAlessandro Rubini <rubini@gnudd.com>2013-06-18 23:47:56 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2013-06-18 15:42:15 -0700
commit6007b1bd0f752a5c022f7944c65fb96c39d6db3d (patch)
treed0b3074fc8e0589603dbbe4ebc8a3b5c52287842 /Documentation/fmc
parent056d83f3c30c398f14eb879f1d1707e3a7808f4a (diff)
FMC: add a driver to write mezzanine EEPROM
This driver allows to reprogram the EEPROM in a mezzanine, to store its own identifiers during manufacturing or to save other useful data. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Juan David Gonzalez Cobas <dcobas@cern.ch> Acked-by: Emilio G. Cota <cota@braap.org> Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/fmc')
-rw-r--r--Documentation/fmc/00-INDEX3
-rw-r--r--Documentation/fmc/fmc-write-eeprom.txt125
2 files changed, 128 insertions, 0 deletions
diff --git a/Documentation/fmc/00-INDEX b/Documentation/fmc/00-INDEX
index c22d6873fd0..177c3e4a951 100644
--- a/Documentation/fmc/00-INDEX
+++ b/Documentation/fmc/00-INDEX
@@ -30,3 +30,6 @@ fmc-fakedev.txt
fmc-trivial.txt
- about drivers/fmc/fmc-trivial.ko
+
+fmc-write-eeprom.txt
+ - about drivers/fmc/fmc-write-eeprom.ko
diff --git a/Documentation/fmc/fmc-write-eeprom.txt b/Documentation/fmc/fmc-write-eeprom.txt
new file mode 100644
index 00000000000..44a3bc678bf
--- /dev/null
+++ b/Documentation/fmc/fmc-write-eeprom.txt
@@ -0,0 +1,125 @@
+fmc-write-eeprom
+================
+
+This module is designed to load a binary file from /lib/firmware and to
+write it to the internal EEPROM of the mezzanine card. This driver uses
+the `busid' generic parameter.
+
+Overwriting the EEPROM is not something you should do daily, and it is
+expected to only happen during manufacturing. For this reason, the
+module makes it unlikely for the random user to change a working EEPROM.
+
+The module takes the following measures:
+
+ * It accepts a `file=' argument (within /lib/firmware) and if no
+ such argument is received, it doesn't write anything to EEPROM
+ (i.e. there is no default file name).
+
+ * If the file name ends with `.bin' it is written verbatim starting
+ at offset 0.
+
+ * If the file name ends with `.tlv' it is interpreted as
+ type-length-value (i.e., it allows writev(2)-like operation).
+
+ * If the file name doesn't match any of the patterns above, it is
+ ignored and no write is performed.
+
+ * Only cards listed with `busid=' are written to. If no busid is
+ specified, no programming is done (and the probe function of the
+ driver will fail).
+
+
+Each TLV tuple is formatted in this way: the header is 5 bytes,
+followed by data. The first byte is `w' for write, the next two bytes
+represent the address, in little-endian byte order, and the next two
+represent the data length, in little-endian order. The length does not
+include the header (it is the actual number of bytes to be written).
+
+This is a real example: that writes 5 bytes at position 0x110:
+
+ spusa.root# od -t x1 -Ax /lib/firmware/try.tlv
+ 000000 77 10 01 05 00 30 31 32 33 34
+ 00000a
+ spusa.root# insmod /tmp/fmc-write-eeprom.ko busid=0x0200 file=try.tlv
+ [19983.391498] spec 0000:03:00.0: write 5 bytes at 0x0110
+ [19983.414615] spec 0000:03:00.0: write_eeprom: success
+
+Please note that you'll most likely want to use SDBFS to build your
+EEPROM image, at least if your mezzanines are being used in the White
+Rabbit environment. For this reason the TLV format is not expected to
+be used much and is not expected to be developed further.
+
+If you want to try reflashing fake EEPROM devices, you can use the
+fmc-fakedev.ko module (see *note fmc-fakedev::). Whenever you change
+the image starting at offset 0, it will deregister and register again
+after two seconds. Please note, however, that if fmc-write-eeprom is
+still loaded, the system will associate it to the new device, which
+will be reprogrammed and thus will be unloaded after two seconds. The
+following example removes the module after it reflashed fakedev the
+first time.
+
+ spusa.root# insmod fmc-fakedev.ko
+ [ 72.984733] fake-fmc: Manufacturer: fake-vendor
+ [ 72.989434] fake-fmc: Product name: fake-design-for-testing
+ spusa.root# insmod fmc-write-eeprom.ko busid=0 file=fdelay-eeprom.bin; \
+ rmmod fmc-write-eeprom
+ [ 130.874098] fake-fmc: Matching a generic driver (no ID)
+ [ 130.887845] fake-fmc: programming 6155 bytes
+ [ 130.894567] fake-fmc: write_eeprom: success
+ [ 132.895794] fake-fmc: Manufacturer: CERN
+ [ 132.899872] fake-fmc: Product name: FmcDelay1ns4cha
+
+
+Writing to the EEPROM
+=====================
+
+Once you have created a binary file for your EEPROM, you can write it
+to the storage medium using the fmc-write-eeprom (See *note
+fmc-write-eeprom::, while relying on a carrier driver. The procedure
+here shown here uses the SPEC driver
+(`http://www.ohwr.org/projects/spec-sw').
+
+The example assumes no driver is already loaded (actually, I unloaded
+them by hand as everything loads automatically at boot time after you
+installed the modules), and shows kernel messages together with
+commands. Here the prompt is spusa.root# and two SPEC cards are plugged
+in the system.
+
+ spusa.root# insmod fmc.ko
+ spusa.root# insmod spec.ko
+ [13972.382818] spec 0000:02:00.0: probe for device 0002:0000
+ [13972.392773] spec 0000:02:00.0: got file "fmc/spec-init.bin", 1484404 (0x16a674) bytes
+ [13972.591388] spec 0000:02:00.0: FPGA programming successful
+ [13972.883011] spec 0000:02:00.0: EEPROM has no FRU information
+ [13972.888719] spec 0000:02:00.0: No device_id filled, using index
+ [13972.894676] spec 0000:02:00.0: No mezzanine_name found
+ [13972.899863] /home/rubini/wip/spec-sw/kernel/spec-gpio.c - spec_gpio_init
+ [13972.906578] spec 0000:04:00.0: probe for device 0004:0000
+ [13972.916509] spec 0000:04:00.0: got file "fmc/spec-init.bin", 1484404 (0x16a674) bytes
+ [13973.115096] spec 0000:04:00.0: FPGA programming successful
+ [13973.401798] spec 0000:04:00.0: EEPROM has no FRU information
+ [13973.407474] spec 0000:04:00.0: No device_id filled, using index
+ [13973.413417] spec 0000:04:00.0: No mezzanine_name found
+ [13973.418600] /home/rubini/wip/spec-sw/kernel/spec-gpio.c - spec_gpio_init
+ spusa.root# ls /sys/bus/fmc/devices
+ fmc-0000 fmc-0001
+ spusa.root# insmod fmc-write-eeprom.ko busid=0x0200 file=fdelay-eeprom.bin
+ [14103.966259] spec 0000:02:00.0: Matching an generic driver (no ID)
+ [14103.975519] spec 0000:02:00.0: programming 6155 bytes
+ [14126.373762] spec 0000:02:00.0: write_eeprom: success
+ [14126.378770] spec 0000:04:00.0: Matching an generic driver (no ID)
+ [14126.384903] spec 0000:04:00.0: fmc_write_eeprom: no filename given: not programming
+ [14126.392600] fmc_write_eeprom: probe of fmc-0001 failed with error -2
+
+Reading back the EEPROM
+=======================
+
+In order to read back the binary content of the EEPROM of your
+mezzanine device, the bus creates a read-only sysfs file called eeprom
+for each mezzanine it knows about:
+
+ spusa.root# cd /sys/bus/fmc/devices; ls -l */eeprom
+ -r--r--r-- 1 root root 8192 Apr 9 16:53 FmcDelay1ns4cha-f001/eeprom
+ -r--r--r-- 1 root root 8192 Apr 9 17:19 fake-design-for-testing-f002/eeprom
+ -r--r--r-- 1 root root 8192 Apr 9 17:19 fake-design-for-testing-f003/eeprom
+ -r--r--r-- 1 root root 8192 Apr 9 17:19 fmc-f004/eeprom