aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>2007-02-10 01:46:01 -0800
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-02-11 10:51:32 -0800
commitf1f8810cf48dd88ee70e974924f2dd76e5669dd5 (patch)
treef659e13493454b542719a99d0bc2a5533d67a649 /Documentation
parentd4d23add3abcd18d8021b99f230df608ccb2f007 (diff)
[PATCH] local_t: Documentation
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/local_ops.txt163
1 files changed, 163 insertions, 0 deletions
diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt
new file mode 100644
index 00000000000..b0aca0705d1
--- /dev/null
+++ b/Documentation/local_ops.txt
@@ -0,0 +1,163 @@
+ Semantics and Behavior of Local Atomic Operations
+
+ Mathieu Desnoyers
+
+
+ This document explains the purpose of the local atomic operations, how
+to implement them for any given architecture and shows how they can be used
+properly. It also stresses on the precautions that must be taken when reading
+those local variables across CPUs when the order of memory writes matters.
+
+
+
+* Purpose of local atomic operations
+
+Local atomic operations are meant to provide fast and highly reentrant per CPU
+counters. They minimize the performance cost of standard atomic operations by
+removing the LOCK prefix and memory barriers normally required to synchronize
+across CPUs.
+
+Having fast per CPU atomic counters is interesting in many cases : it does not
+require disabling interrupts to protect from interrupt handlers and it permits
+coherent counters in NMI handlers. It is especially useful for tracing purposes
+and for various performance monitoring counters.
+
+Local atomic operations only guarantee variable modification atomicity wrt the
+CPU which owns the data. Therefore, care must taken to make sure that only one
+CPU writes to the local_t data. This is done by using per cpu data and making
+sure that we modify it from within a preemption safe context. It is however
+permitted to read local_t data from any CPU : it will then appear to be written
+out of order wrt other memory writes on the owner CPU.
+
+
+* Implementation for a given architecture
+
+It can be done by slightly modifying the standard atomic operations : only
+their UP variant must be kept. It typically means removing LOCK prefix (on
+i386 and x86_64) and any SMP sychronization barrier. If the architecture does
+not have a different behavior between SMP and UP, including asm-generic/local.h
+in your archtecture's local.h is sufficient.
+
+The local_t type is defined as an opaque signed long by embedding an
+atomic_long_t inside a structure. This is made so a cast from this type to a
+long fails. The definition looks like :
+
+typedef struct { atomic_long_t a; } local_t;
+
+
+* How to use local atomic operations
+
+#include <linux/percpu.h>
+#include <asm/local.h>
+
+static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);
+
+
+* Counting
+
+Counting is done on all the bits of a signed long.
+
+In preemptible context, use get_cpu_var() and put_cpu_var() around local atomic
+operations : it makes sure that preemption is disabled around write access to
+the per cpu variable. For instance :
+
+ local_inc(&get_cpu_var(counters));
+ put_cpu_var(counters);
+
+If you are already in a preemption-safe context, you can directly use
+__get_cpu_var() instead.
+
+ local_inc(&__get_cpu_var(counters));
+
+
+
+* Reading the counters
+
+Those local counters can be read from foreign CPUs to sum the count. Note that
+the data seen by local_read across CPUs must be considered to be out of order
+relatively to other memory writes happening on the CPU that owns the data.
+
+ long sum = 0;
+ for_each_online_cpu(cpu)
+ sum += local_read(&per_cpu(counters, cpu));
+
+If you want to use a remote local_read to synchronize access to a resource
+between CPUs, explicit smp_wmb() and smp_rmb() memory barriers must be used
+respectively on the writer and the reader CPUs. It would be the case if you use
+the local_t variable as a counter of bytes written in a buffer : there should
+be a smp_wmb() between the buffer write and the counter increment and also a
+smp_rmb() between the counter read and the buffer read.
+
+
+Here is a sample module which implements a basic per cpu counter using local.h.
+
+--- BEGIN ---
+/* test-local.c
+ *
+ * Sample module for local.h usage.
+ */
+
+
+#include <asm/local.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+
+static DEFINE_PER_CPU(local_t, counters) = LOCAL_INIT(0);
+
+static struct timer_list test_timer;
+
+/* IPI called on each CPU. */
+static void test_each(void *info)
+{
+ /* Increment the counter from a non preemptible context */
+ printk("Increment on cpu %d\n", smp_processor_id());
+ local_inc(&__get_cpu_var(counters));
+
+ /* This is what incrementing the variable would look like within a
+ * preemptible context (it disables preemption) :
+ *
+ * local_inc(&get_cpu_var(counters));
+ * put_cpu_var(counters);
+ */
+}
+
+static void do_test_timer(unsigned long data)
+{
+ int cpu;
+
+ /* Increment the counters */
+ on_each_cpu(test_each, NULL, 0, 1);
+ /* Read all the counters */
+ printk("Counters read from CPU %d\n", smp_processor_id());
+ for_each_online_cpu(cpu) {
+ printk("Read : CPU %d, count %ld\n", cpu,
+ local_read(&per_cpu(counters, cpu)));
+ }
+ del_timer(&test_timer);
+ test_timer.expires = jiffies + 1000;
+ add_timer(&test_timer);
+}
+
+static int __init test_init(void)
+{
+ /* initialize the timer that will increment the counter */
+ init_timer(&test_timer);
+ test_timer.function = do_test_timer;
+ test_timer.expires = jiffies + 1;
+ add_timer(&test_timer);
+
+ return 0;
+}
+
+static void __exit test_exit(void)
+{
+ del_timer_sync(&test_timer);
+}
+
+module_init(test_init);
+module_exit(test_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mathieu Desnoyers");
+MODULE_DESCRIPTION("Local Atomic Ops");
+--- END ---