Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

13 files changed, 46 insertions, 24 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index db1ad7e34fc..938ef71e203 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-		bit errors that were corrected on any single region comprising
-		an ecc step (as reported by the driver) equals or exceeds this
-		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-		returned.  Higher layers (e.g., UBI) use this return code as an
-		indication that an erase block may be degrading and should be
-		scrutinized as a candidate for being marked as bad.
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
 
 		The initial value may be specified by the flash device driver.
 		If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description:
 		block degradation, but high enough to avoid the consequences of
 		a persistent return value of -EUCLEAN on devices where sticky
 		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		ecc_strength, -EUCLEAN is never returned by the read operations.
 		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
 		returned, absent a hard error.
 
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 676bc46f9c5..cda0dfb6769 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
 	    from RGB to Y'CbCr color space.
 	    </entry>
 	  </row>
-	  <row id = "v4l2-jpeg-chroma-subsampling">
+	  <row>
 	    <entrytbl spanname="descr" cols="2">
 	      <tbody valign="top">
 		<row>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index e3d5afcdafb..0a4b90fcf2d 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -284,13 +284,6 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-	    <entry>0x9d0000</entry>
-	    <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-		linkend="jpeg-controls" />.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>
diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
index a00c94ccbde..0b96e5737d3 100644
--- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt
+++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible : "fsl,mma8450".
+- reg: the I2C address of MMA8450
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
index 19f6af47a79..baf07987ae6 100644
--- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt
+++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt
@@ -46,8 +46,8 @@ Examples:
 
 ecspi@70010000 { /* ECSPI1 */
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */
+		   <&gpio4 25 0>; /* GPIO4_25 */
 	status = "okay";
 
 	pmic: mc13892@0 {
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index c7e404b3ef0..fea541ee8b3 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -29,6 +29,6 @@ esdhc@70008000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70008000 0x4000>;
 	interrupts = <2>;
-	cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
-	wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
+	cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */
+	wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */
 };
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
index f7a2fefc8ef..d5363922140 100644
--- a/Documentation/devicetree/bindings/net/fsl-fec.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -23,6 +23,6 @@ ethernet@83fec000 {
 	reg = <0x83fec000 0x4000>;
 	interrupts = <87>;
 	phy-mode = "mii";
-	phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */
+	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
 };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
index 82b43f91585..a4119f6422d 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
 MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
 MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID		1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID		1592
diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
index 9841057d112..4256a6df9b7 100644
--- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
+++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt
@@ -17,6 +17,6 @@ ecspi@70010000 {
 	reg = <0x70010000 0x4000>;
 	interrupts = <36>;
 	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
-		   <&gpio3 25 0>; /* GPIO4_25 */
+	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
+		   <&gpio3 25 0>; /* GPIO3_25 */
 };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 6eab91747a8..db4d3af3643 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -3,6 +3,7 @@ Device tree binding vendor prefix registry.  Keep list in alphabetical order.
 This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
+ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index 506c7390c2b..13f1aa09b93 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -86,7 +86,7 @@ There is also a gitweb interface available at
 http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 
 More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
 
 3) Unpack the tarball with the tar command, as follows:
 
diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt
index cb705ec69ab..f7be84fba91 100644
--- a/Documentation/prctl/no_new_privs.txt
+++ b/Documentation/prctl/no_new_privs.txt
@@ -25,6 +25,13 @@ bits will no longer change the uid or gid; file capabilities will not
 add to the permitted set, and LSMs will not relax constraints after
 execve.
 
+To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0).
+
+Be careful, though: LSMs might also not tighten constraints on exec
+in no_new_privs mode.  (This means that setting up a general-purpose
+service launcher to set no_new_privs before execing daemons may
+interfere with LSM-based sandboxing.)
+
 Note that no_new_privs does not prevent privilege changes that do not
 involve execve.  An appropriately privileged task can still call
 setuid(2) and receive SCM_RIGHTS datagrams.
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 930126698a0..2c994837946 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -1930,6 +1930,23 @@ The "pte_enc" field provides a value that can OR'ed into the hash
 PTE's RPN field (ie, it needs to be shifted left by 12 to OR it
 into the hash PTE second double word).
 
+4.75 KVM_IRQFD
+
+Capability: KVM_CAP_IRQFD
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_irqfd (in)
+Returns: 0 on success, -1 on error
+
+Allows setting an eventfd to directly trigger a guest interrupt.
+kvm_irqfd.fd specifies the file descriptor to use as the eventfd and
+kvm_irqfd.gsi specifies the irqchip pin toggled by this event.  When
+an event is tiggered on the eventfd, an interrupt is injected into
+the guest using the specified gsi pin.  The irqfd is removed using
+the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
+and kvm_irqfd.gsi.
+
+
 5. The kvm_run structure
 ------------------------