aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 11:51:39 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-12 11:51:39 -0800
commitd01e4afdbb65e030fd6f1f96c30a558e2eb0f279 (patch)
tree02ef82b2740cf93a98199eded5ef765fa6e03052 /Documentation
parent8287361abca36504da813638310d2547469283eb (diff)
parent794b175fc0c0c4844dbb7b137a73bbfd01f6c608 (diff)
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/arm-boards4
-rw-r--r--Documentation/devicetree/bindings/arm/omap/counter.txt15
-rw-r--r--Documentation/devicetree/bindings/arm/omap/timer.txt31
-rw-r--r--Documentation/devicetree/bindings/bus/omap-ocp2scp.txt18
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/trivial-devices.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/am33xx-usb.txt21
7 files changed, 93 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index fc81a7d6b0f..db5858e32d3 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -9,6 +9,10 @@ Required properties (in root node):
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
+In the root node the Integrator/CP must have a /cpcon node pointing
+to the CP control registers, and the Integrator/AP must have a
+/syscon node pointing to the Integrator/AP system controller.
+
ARM Versatile Application and Platform Baseboards
-------------------------------------------------
diff --git a/Documentation/devicetree/bindings/arm/omap/counter.txt b/Documentation/devicetree/bindings/arm/omap/counter.txt
new file mode 100644
index 00000000000..5bd8aa09131
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/counter.txt
@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible: Must be "ti,omap-counter32k" for OMAP controllers
+- reg: Contains timer register address range (base address and length)
+- ti,hwmods: Name of the hwmod associated to the counter, which is typically
+ "counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4a304000 0x20>;
+ ti,hwmods = "counter_32k";
+};
diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt
new file mode 100644
index 00000000000..8732d4d41f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/timer.txt
@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg: Contains timer register address range (base address and
+ length).
+- interrupts: Contains the interrupt information for the timer. The
+ format is being dependent on which interrupt controller
+ the OMAP device uses.
+- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>",
+ where <X> is the instance number of the timer from the
+ HW spec.
+
+Optional properties:
+- ti,timer-alwon: Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in
+ addition to the ARM CPU.
+- ti,timer-pwm: Indicates the timer can generate a PWM output.
+- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device
+ and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48304000 0x400>;
+ interrupts = <95>;
+ ti,hwmods = "timer12"
+ ti,timer-alwon;
+ ti,timer-secure;
+};
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
index d2fe064a828..63dd8051521 100644
--- a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -2,9 +2,27 @@
properties:
- compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
- ti,hwmods : must be "ocp2scp_usb_phy"
Sub-nodes:
All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+
+ subnode1 {
+ ...
+ };
+
+ subnode2 {
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index f3cf43b66f7..3614242e773 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -12,13 +12,13 @@ Optional properties:
Examples:
i2c@83fc4000 { /* I2C2 on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
};
i2c@70038000 { /* HS-I2C on i.MX51 */
- compatible = "fsl,imx51-i2c", "fsl,imx1-i2c";
+ compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x70038000 0x4000>;
interrupts = <64>;
clock-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 2f5322b119e..446859fcdca 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -55,5 +55,7 @@ st-micro,24c256 i2c serial eeprom (24cxx)
stm,m41t00 Serial Access TIMEKEEPER
stm,m41t62 Serial real-time clock (RTC) with alarm
stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface
ti,tsc2003 I2C Touch-Screen Controller
ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275 Digital Temperature Sensor
diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
index a92250512a4..ea840f7f925 100644
--- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt
+++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt
@@ -1,5 +1,7 @@
AM33XX MUSB GLUE
- compatible : Should be "ti,musb-am33xx"
+ - reg : offset and length of register sets, first usbss, then for musb instances
+ - interrupts : usbss, musb instance interrupts in order
- ti,hwmods : must be "usb_otg_hs"
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
@@ -12,3 +14,22 @@ AM33XX MUSB GLUE
represents PERIPHERAL.
- power : Should be "250". This signifies the controller can supply upto
500mA when operating in host mode.
+
+Example:
+
+usb@47400000 {
+ compatible = "ti,musb-am33xx";
+ reg = <0x47400000 0x1000 /* usbss */
+ 0x47401000 0x800 /* musb instance 0 */
+ 0x47401800 0x800>; /* musb instance 1 */
+ interrupts = <17 /* usbss */
+ 18 /* musb instance 0 */
+ 19>; /* musb instance 1 */
+ multipoint = <1>;
+ num-eps = <16>;
+ ram-bits = <12>;
+ port0-mode = <3>;
+ port1-mode = <3>;
+ power = <250>;
+ ti,hwmods = "usb_otg_hs";
+};