Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

1 files changed, 71 insertions, 21 deletions

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index da9a047ce4c..552aed4ff98 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,21 +88,23 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc@50004000 { /* ESDHC1 */
+				esdhc1: esdhc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50008000 { /* ESDHC2 */
+				esdhc2: esdhc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -115,7 +117,7 @@
 					status = "disabled";
 				};
 
-				ecspi@50010000 { /* ECSPI1 */
+				ecspi1: ecspi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -136,47 +138,49 @@
 					status = "disabled";
 				};
 
-				esdhc@50020000 { /* ESDHC3 */
+				esdhc3: esdhc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50024000 { /* ESDHC4 */
+				esdhc4: esdhc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@53f80000 {
+			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@53f80200 {
+			usbh1: usb@53f80200 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@53f80400 {
+			usbh2: usb@53f80400 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@53f80600 {
+			usbh3: usb@53f80600 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
@@ -223,14 +227,14 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@53f98000 { /* WDOG1 */
+			wdog1: wdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@53f9c000 { /* WDOG2 */
+			wdog2: wdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
@@ -238,7 +242,7 @@
 				status = "disabled";
 			};
 
-			iomuxc@53fa8000 {
+			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 
@@ -338,6 +342,24 @@
 					};
 				};
 
+				can1 {
+					pinctrl_can1_1: can1grp-1 {
+						fsl,pins = <
+							847 0x80000000  /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+						>;
+					};
+				};
+
+				can2 {
+					pinctrl_can2_1: can2grp-1 {
+						fsl,pins = <
+							67  0x80000000  /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+							74  0x80000000  /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+						>;
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <
@@ -356,6 +378,15 @@
 					};
 				};
 
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							1102 0xc0000000	/* MX53_PAD_GPIO_6__I2C3_SDA */
+							1130 0xc0000000	/* MX53_PAD_GPIO_5__I2C3_SCL */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -391,6 +422,25 @@
 						>;
 					};
 				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							11 0x1c5	/* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+							18 0x1c5	/* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+						>;
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5_1: uart5grp-1 {
+						fsl,pins = <
+							24 0x1c5	/* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+							31 0x1c5	/* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+						>;
+					};
+				};
+
 			};
 
 			pwm1: pwm@53fb4000 {
@@ -484,7 +534,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c@53fec000 { /* I2C3 */
+			i2c3: i2c@53fec000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -520,7 +570,7 @@
 				status = "disabled";
 			};
 
-			ecspi@63fac000 { /* ECSPI2 */
+			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -531,7 +581,7 @@
 				status = "disabled";
 			};
 
-			sdma@63fb0000 {
+			sdma: sdma@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
@@ -540,7 +590,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi@63fc0000 {
+			cspi: cspi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -551,7 +601,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc4000 { /* I2C2 */
+			i2c2: i2c@63fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -561,7 +611,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc8000 { /* I2C1 */
+			i2c1: i2c@63fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -581,13 +631,13 @@
 				status = "disabled";
 			};
 
-			audmux@63fd0000 {
+			audmux: audmux@63fd0000 {
 				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 				reg = <0x63fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@63fdb000 {
+			nfc: nand@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -605,7 +655,7 @@
 				status = "disabled";
 			};
 
-			ethernet@63fec000 {
+			fec: ethernet@63fec000 {
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;