Merge branch 'restart' into for-linus

Conflicts:
	arch/arm/mach-exynos/cpu.c

The changes to arch/arm/mach-exynos/cpu.c were moved to
mach-exynos/common.c.

16 files changed, 38 insertions, 25 deletions

diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 37609a22c45..a7277ad470a 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
  /*
@@ -190,6 +191,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index c1b12f945fc..3841ab4146b 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -491,3 +491,23 @@ static void __init ixp4xx_clockevent_init(void)
 
 	clockevents_register_device(&clockevent_ixp4xx);
 }
+
+void ixp4xx_restart(char mode, const char *cmd)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		soft_restart(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 81dfec31842..a74f86ce8bc 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -117,6 +117,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -132,6 +133,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
 	.timer		= &ixp4xx_timer,
 	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 8837fbca27c..67be177b336 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -286,4 +286,5 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 2887c3578c1..6d5818285af 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -277,5 +277,6 @@ MACHINE_START(FSG, "Freecom FSG-3")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d69d1b053bb..7ecf9b28f1c 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -104,5 +104,6 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index bf6678d1a92..c0e3d69a8ae 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -504,4 +504,5 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index aa029fc1914..a23f8939145 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -172,6 +172,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index e824c02c825..df9250bbf13 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -125,6 +125,7 @@ extern void ixp4xx_init_irq(void);
 extern void ixp4xx_sys_init(void);
 extern void ixp4xx_timer_init(void);
 extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
index 24337d9d275..140a9bef446 100644
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -8,9 +8,6 @@
  * published by the Free Software Foundation.
  *
  */
-
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	/* ixp4xx does not implement the XScale PWRMODE register,
@@ -20,25 +17,3 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 #endif
 }
-
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if ( 1 && mode == 's') {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f235f829dfa..8a38b39999f 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -261,6 +261,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index de716fa1aab..1010eb7b008 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -321,4 +321,5 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ac81ccb26bf..aa355c360d5 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -307,4 +307,5 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 3b6a81a696f..0940869fcfd 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -246,6 +246,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= omixp_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -259,6 +260,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
 
@@ -269,5 +271,6 @@ MACHINE_START(MIC256, "Omicron MIC256")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= omixp_init,
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 27e469ef452..9dec2068329 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -244,4 +244,5 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index b14144b967a..5ac0f0a0fd8 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -105,5 +105,6 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 #if defined(CONFIG_PCI)
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= ixp4xx_restart,
 MACHINE_END
 #endif