Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann:
 "Quite a bit of code gets removed, and some stuff moved around, mostly
  the old samsung s3c24xx stuff.  There should be no functional changes
  in this series otherwise.  Some cleanups have dependencies on other
  arm-soc branches and will be sent in the second round.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>"

Fixed up trivial conflicts mainly due to #include's being changes on
both sides.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
  ep93xx: Remove unnecessary includes of ep93xx-regs.h
  ep93xx: Move EP93XX_SYSCON defines to SoC private header
  ep93xx: Move crunch code to mach-ep93xx directory
  ep93xx: Make syscon access functions private to SoC
  ep93xx: Configure GPIO ports in core code
  ep93xx: Move peripheral defines to local SoC header
  ep93xx: Convert the watchdog driver into a platform device.
  ep93xx: Use ioremap for backlight driver
  ep93xx: Move GPIO defines to gpio-ep93xx.h
  ep93xx: Don't use system controller defines in audio drivers
  ep93xx: Move PHYS_BASE defines to local SoC header file
  ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
  ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
  PM / devfreq: update the name of EXYNOS clock registers that were omitted
  PM / devfreq: update the name of EXYNOS clock register
  ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
  ARM: EXYNOS: use static declaration on regarding clock
  ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
  ARM: OMAP2+: Fix build error after merge
  ARM: S3C24XX: remove call to s3c24xx_setup_clocks
  ...

42 files changed, 289 insertions, 81 deletions

diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index c1c5fb6a5b4..399c4c49722 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,11 +15,12 @@
 
 #include <linux/linkage.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 
 #include <mach/ams-delta-fiq.h>
 
+#include "iomap.h"
+
 /*
  * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
  * Unfortunately, those were not placed in a separate header file.
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 152b32c15e2..fcce7ff3763 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -22,6 +22,7 @@
 #include <plat/board-ams-delta.h>
 
 #include <asm/fiq.h>
+
 #include <mach/ams-delta-fiq.h>
 
 static struct fiq_handler fh = {
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index e0e8245f3c9..83eac744ddb 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -21,25 +21,27 @@
 #include <linux/serial_8250.h>
 #include <linux/export.h>
 #include <linux/omapfb.h>
+#include <linux/io.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/serial.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include "common.h"
-#include <mach/camera.h>
 
+#include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
+#include <mach/camera.h>
+
+#include "iomap.h"
+#include "common.h"
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 7afaf3c5bdc..80bd43c7f4e 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -23,7 +23,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,9 +32,13 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* fsample is pretty close to p2-sample */
 
 #define fsample_cpld_read(reg) __raw_readb(reg)
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index af2be8c12c0..c3068622fdc 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -32,8 +32,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -44,9 +42,11 @@
 #include <plat/irda.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "board-h2.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7cfd25b9073..64b8584f64c 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -34,21 +34,21 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "common.h"
 #include "board-h3.h"
 
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index af2afcf24f7..827d83a96af 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/io.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
@@ -42,7 +42,6 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include "common.h"
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
@@ -50,7 +49,7 @@
 
 #include <mach/irqs.h>
 
-#include <linux/delay.h>
+#include "common.h"
 
 /* LCD register definition */
 #define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 1d5ab6606b9..61219182d16 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -27,7 +27,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,9 +37,13 @@
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/mmc.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
 
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 9b6332a31fb..fe95ec5f6f0 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -21,7 +21,6 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -30,11 +29,14 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 #define ADS7846_PENDOWN_GPIO	15
 
 static const unsigned int nokia770_keymap[] = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ef874655fbd..1fe347396f4 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -35,15 +35,11 @@
 #include <linux/leds.h>
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-
 #include <linux/i2c/tps65010.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -52,6 +48,9 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 612342cb2a2..0863d8e2bdf 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -29,7 +29,6 @@
 #include <linux/apm-emulation.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,6 +41,9 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 #define PALMTE_USBDETECT_GPIO	0
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index b63350bc88f..4ff699c509c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -25,8 +25,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 #include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -40,10 +41,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMTT_USBDETECT_GPIO	0
 #define PALMTT_CABLE_GPIO	1
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 9924c70af09..abcbbd339ae 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -28,8 +28,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,10 +43,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
 #define PALMZ71_PENIRQ_GPIO	6
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 8e0153447c6..76d4ee05a81 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -23,7 +23,6 @@
 #include <linux/smc91x.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -33,9 +32,13 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 static const unsigned int p2_keymap[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(1, 0, KEY_RIGHT),
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0c76e12337d..f34cb74a9f4 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -29,7 +29,6 @@
 #include <linux/export.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,10 +40,13 @@
 #include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include "common.h"
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
 {
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f83a502dc93..659d0f75de2 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -27,18 +27,20 @@
 #include <linux/smc91x.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board-voiceblue.h>
-#include "common.h"
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 0c50df05d13..67382ddd8c8 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -15,8 +15,8 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -27,6 +27,9 @@
 #include <plat/sram.h>
 #include <plat/clkdev_omap.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
 #include "clock.h"
 #include "opp.h"
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 94699a82a73..c6ce93f71d0 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -15,10 +15,10 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
-#include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
@@ -28,6 +28,9 @@
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
 #include <plat/usb.h>   /* for OTG_BASE */
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
 #include "clock.h"
 
 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index a9a5146dd2d..af658ad338e 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -58,5 +58,6 @@ void omap1_restart(char, const char *);
 
 extern struct sys_timer omap1_timer;
 extern bool omap_32k_timer_init(void);
+extern void __init omap_init_consistent_dma_size(void);
 
 #endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 187b2fe132e..dcd8ddbec2b 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -15,20 +15,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/spi/spi.h>
 
-#include <mach/camera.h>
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include "common.h"
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
 
+#include <mach/camera.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "clock.h"
 
 /*-------------------------------------------------------------------------*/
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index f5a52204b89..3ef7d52316b 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -19,11 +19,11 @@
  */
 
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 #include <plat/dma.h>
 #include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 1749cb37dda..f9bf78d4fdf 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -6,13 +6,15 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
-#include <plat/io.h>
 #include <plat/tc.h>
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
 void omap1_set_vpp(struct platform_device *pdev, int enable)
 {
 	static int count;
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0a17a1a7e00..76c67b3f9f6 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -24,12 +24,15 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <plat/fpga.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
 static void fpga_mask_irq(struct irq_data *d)
 {
 	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 399da4ce017..634903ef829 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -42,11 +42,12 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
+	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
 	.regs			= &omap15xx_mpuio_regs,
@@ -83,11 +84,12 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
 	.irqenable	= OMAP1510_GPIO_INT_MASK,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP1510_GPIO_INT_CONTROL,
+	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_1510,
 	.bank_width		= 16,
 	.regs                   = &omap15xx_gpio_regs,
 };
@@ -115,7 +117,6 @@ static int __init omap15xx_gpio_init(void)
 	platform_device_register(&omap15xx_mpu_gpio);
 	platform_device_register(&omap15xx_gpio);
 
-	gpio_bank_count = 2;
 	return 0;
 }
 postcore_initcall(omap15xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 0f399bd0e70..1fb3b9ad496 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -24,6 +24,9 @@
 #define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
+/* smart idle, enable wakeup */
+#define SYSCONFIG_WORD			0x14
+
 /* mpu gpio */
 static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
 	{
@@ -45,11 +48,12 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
+	.is_mpuio		= true,
 	.bank_width		= 16,
 	.bank_stride		= 1,
 	.regs                   = &omap16xx_mpuio_regs,
@@ -89,11 +93,13 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
 	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
 	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
+	.wkup_en	= OMAP1610_GPIO_WAKEUPENABLE,
+	.edgectrl1	= OMAP1610_GPIO_EDGE_CTRL1,
+	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -123,7 +129,6 @@ static struct __initdata resource omap16xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 16,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -153,7 +158,6 @@ static struct __initdata resource omap16xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -183,7 +187,6 @@ static struct __initdata resource omap16xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 48,
-	.bank_type		= METHOD_GPIO_1610,
 	.bank_width		= 16,
 	.regs                   = &omap16xx_gpio_regs,
 };
@@ -214,14 +217,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = {
 static int __init omap16xx_gpio_init(void)
 {
 	int i;
+	void __iomem *base;
+	struct resource *res;
+	struct platform_device *pdev;
+	struct omap_gpio_platform_data *pdata;
 
 	if (!cpu_is_omap16xx())
 		return -EINVAL;
 
-	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
-		platform_device_register(omap16xx_gpio_dev[i]);
+	/*
+	 * Enable system clock for GPIO module.
+	 * The CAM_CLK_CTRL *is* really the right place.
+	 */
+	omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+					ULPD_CAM_CLK_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+		pdev = omap16xx_gpio_dev[i];
+		pdata = pdev->dev.platform_data;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (unlikely(!res)) {
+			dev_err(&pdev->dev, "Invalid mem resource.\n");
+			return -ENODEV;
+		}
 
-	gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
+		base = ioremap(res->start, resource_size(res));
+		if (unlikely(!base)) {
+			dev_err(&pdev->dev, "ioremap failed.\n");
+			return -ENOMEM;
+		}
+
+		__raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
+		iounmap(base);
+
+		platform_device_register(omap16xx_gpio_dev[i]);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 5ab63eab0ff..4771d6b68b9 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -47,12 +47,13 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
 	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
 	.virtual_irq_start	= IH_MPUIO_BASE,
-	.bank_type		= METHOD_MPUIO,
-	.bank_width		= 32,
+	.is_mpuio		= true,
+	.bank_width		= 16,
 	.bank_stride		= 2,
 	.regs                   = &omap7xx_mpuio_regs,
 };
@@ -88,11 +89,11 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
 	.irqenable	= OMAP7XX_GPIO_INT_MASK,
 	.irqenable_inv	= true,
+	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
 };
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
 	.virtual_irq_start	= IH_GPIO_BASE,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -122,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 32,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -152,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 64,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -182,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 96,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -212,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 128,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -242,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
 	.virtual_irq_start	= IH_GPIO_BASE + 160,
-	.bank_type		= METHOD_GPIO_7XX,
 	.bank_width		= 32,
 	.regs			= &omap7xx_gpio_regs,
 };
@@ -282,8 +278,6 @@ static int __init omap7xx_gpio_init(void)
 	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
 		platform_device_register(omap7xx_gpio_dev[i]);
 
-	gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
-
 	return 0;
 }
 postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index a0e3560b39d..f24c1e2c504 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,8 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
 #define OMAP_PRODUCTION_ID_0	0xfffe2000
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index 83c0250c530..fa0f32a686a 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -9,10 +9,12 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
-#include <asm/hardware/gic.h>
+
+#include "../../iomap.h"
 
 		.macro  get_irqnr_preamble, base, tmp
 		.endm
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
index a3f6287b200..01e35fa106b 100644
--- a/arch/arm/mach-omap1/include/mach/hardware.h
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -2,4 +2,40 @@
  * arch/arm/mach-omap1/include/mach/hardware.h
  */
 
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#ifndef __ASSEMBLER__
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <plat/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif
+#endif
+
 #include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
index 57bdf74a3e6..37b12e1fd02 100644
--- a/arch/arm/mach-omap1/include/mach/io.h
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -1,5 +1,46 @@
 /*
  * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
  */
 
-#include <plat/io.h>
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index c6337645ba8..901082def9b 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -18,7 +18,8 @@
  * Note that the is_lbus_device() test is not very efficient on 1510
  * because of the strncmp().
  */
-#ifdef CONFIG_ARCH_OMAP15XX
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <plat/cpu.h>
 
 /*
  * OMAP-1510 Local Bus address offset
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 55a8f582d04..d969a7203d1 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,9 +15,12 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
+
 #include <plat/mux.h>
 #include <plat/tc.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "clock.h"
 
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
new file mode 100644
index 00000000000..d68175761c3
--- /dev/null
+++ b/arch/arm/mach-omap1/iomap.h
@@ -0,0 +1,42 @@
+/*
+ * IO mappings for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e5b104b7fce..4448114fab7 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -42,11 +42,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 4c5ce7d829c..86ace9aaa66 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -27,9 +27,10 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <plat/dma.h>
+
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
-#include <plat/dma.h>
 
 int omap_lcd_dma_running(void)
 {
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 3e8410a9999..adf00975b9b 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,12 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <mach/irqs.h>
 #include <plat/dma.h>
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
+
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 0c2c3669d59..306beaca14c 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -49,7 +49,6 @@
 #include <asm/mach/irq.h>
 
 #include <plat/cpu.h>
-#include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
@@ -57,6 +56,9 @@
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
index 91d199b6497..f255b153b86 100644
--- a/arch/arm/mach-omap1/reset.c
+++ b/arch/arm/mach-omap1/reset.c
@@ -4,9 +4,10 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <plat/prcm.h>
 
+#include <mach/hardware.h>
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index c875bdc902c..0779db150da 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -33,8 +33,12 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
+
+#include "iomap.h"
 #include "pm.h"
 
 		.text
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 692587d07ea..2ce0b9ab20e 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -9,10 +9,14 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
 #include <mach/hardware.h>
 
+#include "iomap.h"
+
 	.text
 
 /*
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index b8faffa44f9..2fae6a2740f 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,14 +45,15 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "iomap.h"
 #include "common.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 9a54ef4dcf5..a2e6d0709df 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -47,14 +47,17 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include "common.h"
+
 #include <plat/dmtimer.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer