Merge tag 'omap-for-v3.8/cleanup-headers-signed' into omap-for-v3.8/cleanup-headers-serial-take2

This is the first set of omap cleanup patches for v3.8 merge
window to remove most of the remaining plat includes to get us
closer to ARM common zImage support.

To avoid a huge amount of trivial merge conflicts with includes,
this branch is based on several small topic branches coordinated
with the driver subsystem maintainers. These branches are based on
v3.7-rc1 and can also be merged into the related driver subsystem
branches as needed:

omap-for-v3.8/cleanup-headers-prepare   few trivial driver changes
omap-for-v3.8/cleanup-headers-dma       move of the DMA header
omap-for-v3.8/cleanup-headers-gpmc      GPMC and MTD changes
omap-for-v3.8/cleanup-headers-mmc       MMC related changes
omap-for-v3.8/cleanup-headers-dss       DSS related changes
omap-for-v3.8/cleanup-headers-asoc      ASoC related changes

Note that for the dma-omap.h, it was decided that it should be
is completed. For the related discussion, please see:

https://patchwork.kernel.org/patch/1519591/#

After these patches we still have a few plat headers remaining
that will be handled in later pull requests.

1 files changed, 23 insertions, 441 deletions

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 92b5718fa72..bf6117c32f4 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,16 +26,14 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
-#include <asm/mach-types.h>
-#include <plat/gpmc.h>
+#include <linux/platform_data/mtd-nand-omap2.h>
 
-#include <plat/cpu.h>
-#include <plat/gpmc.h>
-#include <plat/sdrc.h>
-#include <plat/omap_device.h>
+#include <asm/mach-types.h>
 
 #include "soc.h"
 #include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
 
 #define	DEVICE_NAME		"omap-gpmc"
 
@@ -59,6 +57,9 @@
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
 #define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_1	0x244	/* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_2	0x248	/* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_3	0x24c	/* not available on OMAP2 */
 
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR		0x100
@@ -75,6 +76,7 @@
 
 #define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
+#define	GPMC_BCH_SIZE		0x10
 
 #define GPMC_MEM_START		0x00000000
 #define GPMC_MEM_END		0x3FFFFFFF
@@ -137,7 +139,6 @@ static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -158,22 +159,6 @@ static u32 gpmc_read_reg(int idx)
 	return __raw_readl(gpmc_base + idx);
 }
 
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readb(reg_addr);
-}
-
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
@@ -288,7 +273,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
 		return -1
 #endif
 
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
 {
 	int div;
 	u32 l;
@@ -308,7 +293,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	int div;
 	u32 l;
 
-	div = gpmc_cs_calc_divider(cs, t->sync_clk);
+	div = gpmc_calc_divider(t->sync_clk);
 	if (div < 0)
 		return div;
 
@@ -509,44 +494,6 @@ void gpmc_cs_free(int cs)
 EXPORT_SYMBOL(gpmc_cs_free);
 
 /**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
-	int	status = -EINVAL;
-	u32	regval = 0;
-
-	switch (cmd) {
-	case GPMC_GET_IRQ_STATUS:
-		status = gpmc_read_reg(GPMC_IRQSTATUS);
-		break;
-
-	case GPMC_PREFETCH_FIFO_CNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
-		break;
-
-	case GPMC_PREFETCH_COUNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_COUNT(regval);
-		break;
-
-	case GPMC_STATUS_BUFFER:
-		regval = gpmc_read_reg(GPMC_STATUS);
-		/* 1 : buffer is available to write */
-		status = regval & GPMC_STATUS_BUFF_EMPTY;
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_status: Not supported\n");
-	}
-	return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
-/**
  * gpmc_cs_configure - write request to configure gpmc
  * @cs: chip select number
  * @cmd: command type
@@ -614,121 +561,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 }
 EXPORT_SYMBOL(gpmc_cs_configure);
 
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
-	int rval = -EINVAL;
-
-	switch (cmd) {
-	case GPMC_NAND_DATA:
-		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
-	}
-	return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
-	int err = 0;
-
-	switch (cmd) {
-	case GPMC_NAND_COMMAND:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
-		break;
-
-	case GPMC_NAND_ADDRESS:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
-		break;
-
-	case GPMC_NAND_DATA:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
-	default:
-		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
-		err = -EINVAL;
-	}
-	return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-				unsigned int u32_count, int is_write)
-{
-
-	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
-		pr_err("gpmc: fifo threshold is not supported\n");
-		return -1;
-	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
-		/* Set the amount of bytes to be prefetched */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
-		/* Set dma/mpu mode, the prefetch read / post write and
-		 * enable the engine. Set which cs is has requested for.
-		 */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD(fifo_th) |
-					ENABLE_PREFETCH |
-					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write)));
-
-		/*  Start the prefetch engine */
-		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
-	} else {
-		return -EBUSY;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
-	u32 config1;
-
-	/* check if the same module/cs is trying to reset */
-	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
-		return -EINVAL;
-
-	/* Stop the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
-	/* Reset/disable the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
 void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 {
+	int i;
+
 	reg->gpmc_status = gpmc_base + GPMC_STATUS;
 	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
 				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +580,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 	reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
 	reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
 	reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
-	reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+	for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+		reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+					   GPMC_BCH_SIZE * i;
+	}
 }
 
 int gpmc_get_client_irq(unsigned irq_config)
@@ -1093,267 +939,3 @@ void omap3_gpmc_restore_context(void)
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
-	unsigned int val;
-
-	/* check if ecc module is in used */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	gpmc_ecc_used = cs;
-
-	/* clear ecc and enable bits */
-	gpmc_write_reg(GPMC_ECC_CONTROL,
-			GPMC_ECC_CTRL_ECCCLEAR |
-			GPMC_ECC_CTRL_ECCREG1);
-
-	/* program ecc and result sizes */
-	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
-	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
-	switch (mode) {
-	case GPMC_ECC_READ:
-	case GPMC_ECC_WRITE:
-		gpmc_write_reg(GPMC_ECC_CONTROL,
-				GPMC_ECC_CTRL_ECCCLEAR |
-				GPMC_ECC_CTRL_ECCREG1);
-		break;
-	case GPMC_ECC_READSYN:
-		gpmc_write_reg(GPMC_ECC_CONTROL,
-				GPMC_ECC_CTRL_ECCCLEAR |
-				GPMC_ECC_CTRL_ECCDISABLE);
-		break;
-	default:
-		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
-		break;
-	}
-
-	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-	val = (dev_width << 7) | (cs << 1) | (0x1);
-	gpmc_write_reg(GPMC_ECC_CONFIG, val);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
-	unsigned int val = 0x0;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	/* read ecc result */
-	val = gpmc_read_reg(GPMC_ECC1_RESULT);
-	*ecc_code++ = val;          /* P128e, ..., P1e */
-	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
-	/* check if ecc module is in use */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	/* support only OMAP3 class */
-	if (!cpu_is_omap34xx()) {
-		printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-	 * Other chips may be added if confirmed to work.
-	 */
-	if ((nerrors == 4) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
-		printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
-		return -EINVAL;
-	}
-
-	/* sanity check */
-	if (nsectors > 8) {
-		printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
-		       nsectors);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors)
-{
-	unsigned int val;
-
-	/* check if ecc module is in use */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	gpmc_ecc_used = cs;
-
-	/* clear ecc and enable bits */
-	gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
-	/*
-	 * When using BCH, sector size is hardcoded to 512 bytes.
-	 * Here we are using wrapping mode 6 both for reading and writing, with:
-	 *  size0 = 0  (no additional protected byte in spare area)
-	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
-	 */
-	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
-	/* BCH configuration */
-	val = ((1                        << 16) | /* enable BCH */
-	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
-	       (0x06                     <<  8) | /* wrap mode = 6 */
-	       (dev_width                <<  7) | /* bus width */
-	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
-	       (cs                       <<  1) | /* ECC CS */
-	       (0x1));                            /* enable ECC */
-
-	gpmc_write_reg(GPMC_ECC_CONFIG, val);
-	gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
-	int i;
-	unsigned long nsectors, reg, val1, val2;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
-
-		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
-		/* Read hw-computed remainder */
-		val1 = gpmc_read_reg(reg + 0);
-		val2 = gpmc_read_reg(reg + 4);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
-		 * left-justify the resulting polynomial.
-		 */
-		*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
-		*ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
-		*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
-		*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
-		*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
-		*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
-		*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
-	}
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
-	int i;
-	unsigned long nsectors, reg, val1, val2, val3, val4;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
-
-		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
-		/* Read hw-computed remainder */
-		val1 = gpmc_read_reg(reg + 0);
-		val2 = gpmc_read_reg(reg + 4);
-		val3 = gpmc_read_reg(reg + 8);
-		val4 = gpmc_read_reg(reg + 12);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs.
-		 */
-		*ecc++ = 0xef ^ (val4 & 0xFF);
-		*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
-		*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
-		*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
-		*ecc++ = 0xed ^ (val3 & 0xFF);
-		*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
-		*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
-		*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
-		*ecc++ = 0x97 ^ (val2 & 0xFF);
-		*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
-		*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
-		*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
-		*ecc++ = 0xb5 ^ (val1 & 0xFF);
-	}
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */