Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: global cleanups" from Arnd Bergmann: "Quite a bit of code gets removed, and some stuff moved around, mostly the old samsung s3c24xx stuff. There should be no functional changes in this series otherwise. Some cleanups have dependencies on other arm-soc branches and will be sent in the second round. Signed-off-by: Arnd Bergmann <arnd@arndb.de>" Fixed up trivial conflicts mainly due to #include's being changes on both sides. * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits) ep93xx: Remove unnecessary includes of ep93xx-regs.h ep93xx: Move EP93XX_SYSCON defines to SoC private header ep93xx: Move crunch code to mach-ep93xx directory ep93xx: Make syscon access functions private to SoC ep93xx: Configure GPIO ports in core code ep93xx: Move peripheral defines to local SoC header ep93xx: Convert the watchdog driver into a platform device. ep93xx: Use ioremap for backlight driver ep93xx: Move GPIO defines to gpio-ep93xx.h ep93xx: Don't use system controller defines in audio drivers ep93xx: Move PHYS_BASE defines to local SoC header file ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver ARM: EXYNOS: add clock registers for exynos4x12-cpufreq PM / devfreq: update the name of EXYNOS clock registers that were omitted PM / devfreq: update the name of EXYNOS clock register ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock ARM: EXYNOS: use static declaration on regarding clock ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs ARM: OMAP2+: Fix build error after merge ARM: S3C24XX: remove call to s3c24xx_setup_clocks ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2012-03-27 16:03:32 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2012-03-27 16:03:32 -0700
commit: d61b7a572b292e2be409e13b4b3adf475f18fb29 (patch)
tree: e9d30390860147136c05e66abf1edda1bc5b0562 /arch/arm/mach-s3c2440
parent: 18d9946bc7e2252fe3c0f2f609ac383c627edefd (diff)
parent: f4e2467bad53023589cbff18dd1ab6e0aa3f004c (diff)
22 files changed, 1 insertions, 5619 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 914e620f125..ece7a10fe3c 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -2,35 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2440
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C2410_DMA
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	bool
-	depends on CPU_S3C2440 || CPU_S3C2442
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
@@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
-	bool
-	depends on CPU_S3C2440
-	help
-	  Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	select TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select PM_H1940 if PM
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	select CPU_S3C2442
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select CPU_S3C2440
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select CPU_S3C2440
-	select EEPROM_AT24
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGER
-	select LEDS_TRIGGER_BACKLIGHT
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select CPU_S3C2442
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
-	select I2C
-	select S3C2410_PWM
-	select S3C_DEV_NAND
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	help
-	   Say Y here if you're using HP iPAQ rx1950
-
-endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index d5440fa34b0..c4609243981 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -9,33 +9,9 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= clock.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma.o
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 
 obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
deleted file mode 100644
index 414364eb426..00000000000
--- a/arch/arm/mach-s3c2440/clock.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-};
-
-static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c2440/common.h b/arch/arm/mach-s3c2440/common.h
deleted file mode 100644
index 0c1eb1dfc53..00000000000
--- a/arch/arm/mach-s3c2440/common.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Common Header for S3C2440 machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
-#define __ARCH_ARM_MACH_S3C2440_COMMON_H
-
-void s3c244x_restart(char mode, const char *cmd);
-
-#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
deleted file mode 100644
index 5f0a0c8ef84..00000000000
--- a/arch/arm/mach-s3c2440/dma.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-
-#include <plat/dma-s3c24xx.h>
-#include <plat/cpu.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-ac97.h>
-#include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-sdi.h>
-#include <plat/regs-iis.h>
-#include <plat/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
-	[DMACH_XD0] = {
-		.name		= "xdreq0",
-		.channels[0]	= S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
-	},
-	[DMACH_XD1] = {
-		.name		= "xdreq1",
-		.channels[1]	= S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
-	},
-	[DMACH_SDI] = {
-		.name		= "sdi",
-		.channels[0]	= S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
-		.channels[1]	= S3C2440_DCON_CH1_SDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
-	},
-	[DMACH_SPI0] = {
-		.name		= "spi0",
-		.channels[1]	= S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
-	},
-	[DMACH_SPI1] = {
-		.name		= "spi1",
-		.channels[3]	= S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
-	},
-	[DMACH_UART0] = {
-		.name		= "uart0",
-		.channels[0]	= S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
-	},
-	[DMACH_UART1] = {
-		.name		= "uart1",
-		.channels[1]	= S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
-	},
-      	[DMACH_UART2] = {
-		.name		= "uart2",
-		.channels[3]	= S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
-	},
-	[DMACH_TIMER] = {
-		.name		= "timer",
-		.channels[0]	= S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
-		.channels[3]	= S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
-	},
-	[DMACH_I2S_IN] = {
-		.name		= "i2s-sdi",
-		.channels[1]	= S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
-	},
-	[DMACH_I2S_OUT] = {
-		.name		= "i2s-sdo",
-		.channels[0]	= S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID,
-		.channels[2]	= S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
-	},
-	[DMACH_PCM_IN] = {
-		.name		= "pcm-in",
-		.channels[0]	= S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID,
-		.channels[2]	= S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID,
-	},
-	[DMACH_PCM_OUT] = {
-		.name		= "pcm-out",
-		.channels[1]	= S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID,
-	},
-	[DMACH_MIC_IN] = {
-		.name		= "mic-in",
-		.channels[2]	= S3C2440_DCON_CH2_MICIN | DMA_CH_VALID,
-		.channels[3]	= S3C2440_DCON_CH3_MICIN | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP1] = {
-		.name		= "usb-ep1",
-		.channels[0]	= S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP2] = {
-		.name		= "usb-ep2",
-		.channels[1]	= S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP3] = {
-		.name		= "usb-ep3",
-		.channels[2]	= S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
-	},
-	[DMACH_USB_EP4] = {
-		.name		= "usb-ep4",
-		.channels[3]	= S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
-	},
-};
-
-static void s3c2440_dma_select(struct s3c2410_dma_chan *chan,
-			       struct s3c24xx_dma_map *map)
-{
-	chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = {
-	.select		= s3c2440_dma_select,
-	.dcon_mask	= 7 << 24,
-	.map		= s3c2440_dma_mappings,
-	.map_size	= ARRAY_SIZE(s3c2440_dma_mappings),
-};
-
-static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
-	.channels	= {
-		[DMACH_SDI]	= {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-				[2]	= 1 | DMA_CH_VALID,
-				[3]	= 0 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_IN]	= {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_I2S_OUT]	= {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_IN] = {
-			.list	= {
-				[0]	= 2 | DMA_CH_VALID,
-				[1]	= 1 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_PCM_OUT] = {
-			.list	= {
-				[0]	= 1 | DMA_CH_VALID,
-				[1]	= 3 | DMA_CH_VALID,
-			},
-		},
-		[DMACH_MIC_IN] = {
-			.list	= {
-				[0]	= 3 | DMA_CH_VALID,
-				[1]	= 2 | DMA_CH_VALID,
-			},
-		},
-	},
-};
-
-static int __init s3c2440_dma_add(struct device *dev,
-				  struct subsys_interface *sif)
-{
-	s3c2410_dma_init();
-	s3c24xx_dma_order_set(&s3c2440_dma_order);
-	return s3c24xx_dma_init_map(&s3c2440_dma_sel);
-}
-
-static struct subsys_interface s3c2440_dma_interface = {
-	.name		= "s3c2440_dma",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_dma_add,
-};
-
-static int __init s3c2440_dma_init(void)
-{
-	return subsys_interface_register(&s3c2440_dma_interface);
-}
-
-arch_initcall(s3c2440_dma_init);
-
diff --git a/arch/arm/mach-s3c2440/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
deleted file mode 100644
index 3a56a229cac..00000000000
--- a/arch/arm/mach-s3c2440/include/mach/gta02.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV	0x00000310
-#define GTA02v2_SYSTEM_REV	0x00000320
-#define GTA02v3_SYSTEM_REV	0x00000330
-#define GTA02v4_SYSTEM_REV	0x00000340
-#define GTA02v5_SYSTEM_REV	0x00000350
-/* since A7 is basically same as A6, we use A6 PCB ID */
-#define GTA02v6_SYSTEM_REV	0x00000360
-
-#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA(13)	/* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1	S3C2410_GPB(0)
-#define GTA02_GPIO_PWR_LED2	S3C2410_GPB(1)
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB(2)
-#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB(3)
-#define GTA02_GPIO_MODEM_RST	S3C2410_GPB(5)
-#define GTA02_GPIO_BT_EN	S3C2410_GPB(6)
-#define GTA02_GPIO_MODEM_ON	S3C2410_GPB(7)
-#define GTA02_GPIO_EXTINT8	S3C2410_GPB(8)
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB(9)
-
-#define GTA02_GPIO_PIO5		S3C2410_GPC(5)	/* v3 + v4 only */
-
-#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD(12)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD(13)	/* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ	S3C2410_GPD(14)   /* v5 + */
-
-#define GTA02_GPIO_nG1_INT	S3C2410_GPF(0)
-#define GTA02_GPIO_IO1		S3C2410_GPF(1)
-#define GTA02_GPIO_PIO_2	S3C2410_GPF(2)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF(4)
-#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF(5)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF(6)
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF(7)
-
-#define GTA02_GPIO_3D_IRQ	S3C2410_GPG(4)
-#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG(8)	/* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG(9)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG(10)	/* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG(11)	/* v3 + v4 only */
-
-#define GTA02_GPIO_AMP_SHUT	S3C2410_GPJ(1)	/* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10	S3C2410_GPJ(2)
-#define GTA02_GPIO_HP_IN	S3C2410_GPJ(2)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0		S3C2410_GPJ(3)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN	S3C2410_GPJ(4)
-#define GTA02_GPIO_3D_RESET	S3C2410_GPJ(5)
-#define GTA02_GPIO_nDL_GSM	S3C2410_GPJ(6)	/* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0	S3C2410_GPJ(7)
-#define GTA02v1_GPIO_BAT_ID	S3C2410_GPJ(8)
-#define GTA02_GPIO_KEEPACT	S3C2410_GPJ(8)
-#define GTA02v1_GPIO_HP_IN	S3C2410_GPJ(10)
-#define GTA02_CHIP_PWD		S3C2410_GPJ(11)	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET	S3C2410_GPJ(12)	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
-#define GTA02_IRQ_MODEM		IRQ_EINT1
-#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
-#define GTA02_IRQ_AUX		IRQ_EINT6
-#define GTA02_IRQ_nHOLD		IRQ_EINT7
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-#define GTA02_IRQ_3D		IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0		S3C2410_GPC(13)
-#define GTA02_PCB_ID1_1		S3C2410_GPC(15)
-#define GTA02_PCB_ID1_2		S3C2410_GPD(0)
-#define GTA02_PCB_ID2_0		S3C2410_GPD(3)
-#define GTA02_PCB_ID2_1		S3C2410_GPD(4)
-
-int gta02_get_pcb_revision(void);
-
-#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
deleted file mode 100644
index 4a18cde439c..00000000000
--- a/arch/arm/mach-s3c2440/irq.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 13;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_S3C2440_WDT);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_S3C2440_AC97);
-		}
-	}
-}
-
-
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
-	.irq_mask	= s3c_irq_wdtac97_mask,
-	.irq_unmask	= s3c_irq_wdtac97_unmask,
-	.irq_ack	= s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned int irqno;
-
-	printk("S3C2440: IRQ Support\n");
-
-	/* add new chained handler for wdt, ac7 */
-
-	irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
-				 handle_level_irq);
-	irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
-	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
-	.name		= "s3c2440_irq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
deleted file mode 100644
index 19b577bc09b..00000000000
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ /dev/null
@@ -1,491 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-anubis.c
- *
- * Copyright 2003-2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <net/ax88796.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/audio-simtec.h>
-
-#include "common.h"
-
-#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
-
-static struct map_desc anubis_iodesc[] __initdata = {
-  /* ISA IO areas */
-
-  {
-	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	.pfn		= __phys_to_pfn(0x0),
-	.length		= SZ_4M,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	.pfn		= __phys_to_pfn(0x0),
-	.length 	= SZ_4M,
-	.type		= MT_DEVICE,
-  },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* CPLD control registers */
-
-  {
-	.virtual	= (u32)ANUBIS_VA_CTRL1,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  }, {
-	.virtual	= (u32)ANUBIS_VA_IDREG,
-	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
-	.length		= SZ_4K,
-	.type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on Anubis board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata anubis_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Anubis has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
-		.partitions	= anubis_default_nand_part,
-	},
-};
-
-static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(ANUBIS_VA_CTRL1);
-	tmp &= ~ANUBIS_CTRL1_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
-
-	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
-}
-
-static struct s3c2410_platform_nand __initdata anubis_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
-	.sets		= anubis_nand_sets,
-	.select_chip	= anubis_nand_select,
-};
-
-/* IDE channels */
-
-static struct pata_platform_info anubis_ide_platdata = {
-	.ioport_shift	= 5,
-};
-
-static struct resource anubis_ide0_resource[] = {
-	{
-		.start	= S3C2410_CS3,
-		.end	= S3C2410_CS3 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS3 + (1<<26) + (6*32),
-		.end	= S3C2410_CS3 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device anubis_device_ide0 = {
-	.name		= "pata_platform",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_ide0_resource),
-	.resource	= anubis_ide0_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct resource anubis_ide1_resource[] = {
-	{
-		.start	= S3C2410_CS4,
-		.end	= S3C2410_CS4 + (8*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= S3C2410_CS4 + (1<<26) + (6*32),
-		.end	= S3C2410_CS4 + (1<<26) + (7*32) - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_IDE0,
-		.end	= IRQ_IDE0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device anubis_device_ide1 = {
-	.name		= "pata_platform",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(anubis_ide1_resource),
-	.resource	= anubis_ide1_resource,
-	.dev	= {
-		.platform_data = &anubis_ide_platdata,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-/* Asix AX88796 10/100 ethernet controller */
-
-static struct ax_plat_data anubis_asix_platdata = {
-	.flags		= AXFLG_MAC_FROMDEV,
-	.wordlength	= 2,
-	.dcr_val	= 0x48,
-	.rcr_val	= 0x40,
-};
-
-static struct resource anubis_asix_resource[] = {
-	[0] = {
-		.start = S3C2410_CS5,
-		.end   = S3C2410_CS5 + (0x20 * 0x20) -1,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = IRQ_ASIX,
-		.end   = IRQ_ASIX,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct platform_device anubis_device_asix = {
-	.name		= "ax88796",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_asix_resource),
-	.resource	= anubis_asix_resource,
-	.dev		= {
-		.platform_data = &anubis_asix_platdata,
-	}
-};
-
-/* SM501 */
-
-static struct resource anubis_sm501_resource[] = {
-	[0] = {
-		.start	= S3C2410_CS2,
-		.end	= S3C2410_CS2 + SZ_8M,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= S3C2410_CS2 + SZ_64M - SZ_2M,
-		.end	= S3C2410_CS2 + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_EINT0,
-		.end	= IRQ_EINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sm501_initdata anubis_sm501_initdata = {
-	.gpio_high	= {
-		.set	= 0x3F000000,		/* 24bit panel */
-		.mask	= 0x0,
-	},
-	.misc_timing	= {
-		.set	= 0x010100,		/* SDRAM timing */
-		.mask	= 0x1F1F00,
-	},
-	.misc_control	= {
-		.set	= SM501_MISC_PNL_24BIT,
-		.mask	= 0,
-	},
-
-	.devices	= SM501_USE_GPIO,
-
-	/* set the SDRAM and bus clocks */
-	.mclk		= 72 * MHZ,
-	.m1xclk		= 144 * MHZ,
-};
-
-static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
-	[0] = {
-		.bus_num	= 1,
-		.pin_scl	= 44,
-		.pin_sda	= 45,
-	},
-	[1] = {
-		.bus_num	= 2,
-		.pin_scl	= 40,
-		.pin_sda	= 41,
-	},
-};
-
-static struct sm501_platdata anubis_sm501_platdata = {
-	.init		= &anubis_sm501_initdata,
-	.gpio_base	= -1,
-	.gpio_i2c	= anubis_sm501_gpio_i2c,
-	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
-};
-
-static struct platform_device anubis_device_sm501 = {
-	.name		= "sm501",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(anubis_sm501_resource),
-	.resource	= anubis_sm501_resource,
-	.dev		= {
-		.platform_data = &anubis_sm501_platdata,
-	},
-};
-
-/* Standard Anubis devices */
-
-static struct platform_device *anubis_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
- 	&s3c_device_rtc,
-	&s3c_device_nand,
-	&anubis_device_ide0,
-	&anubis_device_ide1,
-	&anubis_device_asix,
-	&anubis_device_sm501,
-};
-
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-/* I2C devices. */
-
-static struct i2c_board_info anubis_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-	}
-};
-
-/* Audio setup */
-static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
-	.have_mic	= 1,
-	.have_lout	= 1,
-	.output_cdclk	= 1,
-	.use_mpllin	= 1,
-	.amp_gpio	= S3C2410_GPB(2),
-	.amp_gain[0]	= S3C2410_GPD(10),
-	.amp_gain[1]	= S3C2410_GPD(11),
-};
-
-static void __init anubis_map_io(void)
-{
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
-	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
-		printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
-		       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
-		anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
-		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
-	} else {
-		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
-	}
-}
-
-static void __init anubis_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&anubis_nand_info);
-	simtec_audio_add(NULL, false, &anubis_audio);
-
-	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
-
-	i2c_register_board_info(0, anubis_i2c_devs,
-				ARRAY_SIZE(anubis_i2c_devs));
-}
-
-
-MACHINE_START(ANUBIS, "Simtec-Anubis")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= anubis_map_io,
-	.init_machine	= anubis_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
deleted file mode 100644
index d7ae49c9011..00000000000
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- *      and modifications by SBZ <sbz@spgui.org> and
- *      Weibing <http://weibing.blogbus.com>
- *
- * For product information, visit http://www.arm.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/mci.h>
-
-#include "common.h"
-
-static struct map_desc at2440evb_iodesc[] __initdata = {
-	/* Nothing here */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-};
-
-/* NAND Flash on AT2440EVB board */
-
-static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "Kernel",
-		.size	= SZ_2M,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "Root",
-		.offset	= SZ_256K + SZ_2M,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(at2440evb_default_nand_part),
-		.partitions	= at2440evb_default_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 55,
-	.twrph1		= 40,
-	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
-	.sets		= at2440evb_nand_sets,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource at2440evb_dm9k_resource[] = {
-	[0] = {
-		.start = S3C2410_CS3,
-		.end   = S3C2410_CS3 + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = S3C2410_CS3 + 4,
-		.end   = S3C2410_CS3 + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data at2440evb_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device at2440evb_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(at2440evb_dm9k_resource),
-	.resource	= at2440evb_dm9k_resource,
-	.dev		= {
-		.platform_data	= &at2440evb_dm9k_pdata,
-	},
-};
-
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
-	.gpio_detect	= S3C2410_GPG(10),
-};
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 800,
-	.height		= 480,
-
-	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
-	.xres		= 800,
-	.yres		= 480,
-	.bpp		= 16,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 32,
-	.lower_margin	= 11,
-	.vsync_len	= 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
-	.displays	= &at2440evb_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-};
-
-static struct platform_device *at2440evb_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_adc,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_lcd,
-	&at2440evb_device_eth,
-};
-
-static void __init at2440evb_map_io(void)
-{
-	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
-	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
-}
-
-static void __init at2440evb_init(void)
-{
-	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
-	s3c24xx_mci_set_platdata(&at2440evb_mci_pdata);
-	s3c_nand_set_platdata(&at2440evb_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
-}
-
-
-MACHINE_START(AT2440EVB, "AT2440EVB")
-	.atag_offset	= 0x100,
-	.map_io		= at2440evb_map_io,
-	.init_machine	= at2440evb_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
deleted file mode 100644
index 9a4a5bc008e..00000000000
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ /dev/null
@@ -1,605 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
- *
- * Copyright (C) 2006-2009 by Openmoko, Inc.
- * Authors: Harald Welte <laforge@openmoko.org>
- *          Andy Green <andy@openmoko.org>
- *          Werner Almesberger <werner@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mmc/host.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-
-#include <mach/spi.h>
-#include <plat/usb-control.h>
-#include <mach/regs-mem.h>
-#include <mach/hardware.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
-
-#include "common.h"
-
-static struct pcf50633 *gta02_pcf;
-
-/*
- * This gets called frequently when we paniced.
- */
-
-static long gta02_panic_blink(int state)
-{
-	long delay = 0;
-	char led;
-
-	led = (state) ? 1 : 0;
-	gpio_direction_output(GTA02_GPIO_AUX_LED, led);
-
-	return delay;
-}
-
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3 + 0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= UCON,
-		.ulcon		= ULCON,
-		.ufcon		= UFCON,
-	},
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-/*
- * On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
- * We use this to recognize that we can pull 1A from the USB socket.
- *
- * These constants are the measured pcf50633 ADC levels with the 1A
- * charger / 48K resistor, and with no pulldown resistor.
- */
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/*
-		 * Sanity - stop GPO driving out now that we have a 1A charger
-		 * GPO controls USB Host power generation on GTA02
-		 */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(gta02_pcf, gta02_usb_vbus_draw);
-		return;
-	}
-
-#ifdef CONFIG_PCF50633_ADC
-	pcf50633_adc_async_read(gta02_pcf,
-				PCF50633_ADCC1_MUX_ADCIN1,
-				PCF50633_ADCC1_AVERAGE_16,
-				gta02_configure_pmu_for_charger,
-				NULL);
-#else
-	/*
-	 * If the PCF50633 ADC is disabled we fallback to a
-	 * 100mA limit for safety.
-	 */
-	pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-
-		return;
-	}
-
-	if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-			      GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-#else /* !CONFIG_CHARGER_PCF50633 */
-#define gta02_pmu_event_callback	NULL
-#define gta02_udc_vbus_draw		NULL
-#endif
-
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-static struct pcf50633_bl_platform_data gta02_backlight_data = {
-	.default_brightness = 0x3f,
-	.default_brightness_limit = 0,
-	.ramp_time = 5,
-};
-
-struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] =	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] =	PCF50633_INT2_ONKEYF,
-		[2] =	PCF50633_INT3_ONKEY1S,
-		[3] =	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-
-	.charger_reference_current_ma = 1000,
-
-	.backlight_data = &gta02_backlight_data,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.always_on = 1,
-			},
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-						REGULATOR_CHANGE_STATUS,
-			},
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-				.apply_uV = 1,
-			},
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-			},
-		},
-
-	},
-	.probe_done = gta02_pmu_attach_child_devices,
-	.mbc_event_callback = gta02_pmu_event_callback,
-};
-
-
-/* NOR Flash. */
-
-#define GTA02_FLASH_BASE	0x18000000 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gta02_nor_flash_data,
-	},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-struct platform_device s3c24xx_pwm_device = {
-	.name		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct platform_device gta02_dfbmcs320_device = {
-	.name = "dfbmcs320",
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
-	[0] = {
-		/*
-		 * This name is also hard-coded in the boot loaders, so
-		 * changing it would would require all users to upgrade
-		 * their boot loaders, some of which are stored in a NOR
-		 * that is considered to be immutable.
-		 */
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flash_bbt	= 1,
-	},
-};
-
-/*
- * Choose a set of timings derived from S3C@2442B MCP54
- * data sheet (K5D2G13ACM-D075 MCP Memory).
- */
-
-static struct s3c2410_platform_nand __initdata gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-};
-
-
-/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.pullup_pin = GTA02_GPIO_USB_PULLUP,
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info __initdata = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-/* Touchscreen */
-static struct s3c2410_ts_mach_info gta02_ts_info = {
-	.delay			= 10000,
-	.presc			= 0xff, /* slow as we can go */
-	.oversampling_shift	= 2,
-};
-
-/* Buttons */
-static struct gpio_keys_button gta02_buttons[] = {
-	{
-		.gpio = GTA02_GPIO_AUX_KEY,
-		.code = KEY_PHONE,
-		.desc = "Aux",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-	{
-		.gpio = GTA02_GPIO_HOLD_KEY,
-		.code = KEY_PAUSE,
-		.desc = "Hold",
-		.type = EV_KEY,
-		.debounce_interval = 100,
-	},
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
-	.buttons = gta02_buttons,
-	.nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_buttons_device = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &gta02_buttons_pdata,
-	},
-};
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-
-/* These are the guys that don't need to be children of PMU. */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-	&s3c24xx_pwm_device,
-	&s3c_device_iis,
-	&samsung_asoc_dma,
-	&s3c_device_i2c0,
-	&gta02_dfbmcs320_device,
-	&gta02_buttons_device,
-	&s3c_device_adc,
-	&s3c_device_ts,
-};
-
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device.  Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent.  This makes them get suspended and
- * resumed with their parent the pcf50633 still around.  All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	/* Grab a copy of the now probed PMU pointer. */
-	gta02_pcf = pcf;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	platform_add_devices(gta02_devices_pmu_children,
-			     ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
-}
-
-static void __init gta02_machine_init(void)
-{
-	/* Set the panic callback to turn AUX LED on or off. */
-	panic_blink = gta02_panic_blink;
-
-	s3c_pm_init();
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c24xx_ts_set_platdata(&gta02_ts_info);
-	s3c_ohci_set_platdata(&gta02_usb_info);
-	s3c_nand_set_platdata(&gta02_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
-
-	regulator_has_full_constraints();
-}
-
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.atag_offset	= 0x100,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
deleted file mode 100644
index 5d66fb218a4..00000000000
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-mini2440.c
- *
- * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
- *      Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
- *      and modifications by SBZ <sbz@spgui.org> and
- *      Weibing <http://weibing.blogbus.com> and
- *      Michel Pollet <buserror@gmail.com>
- *
- * For product information, visit http://code.google.com/p/mini2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/dm9000.h>
-#include <linux/i2c/at24.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/fb.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <sound/s3c24xx_uda134x.h>
-
-#include "common.h"
-
-#define MACH_MINI2440_DM9K_BASE (S3C2410_CS4 + 0x300)
-
-static struct map_desc mini2440_iodesc[] __initdata = {
-	/* nothing to declare, move along */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-
-static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-};
-
-/* USB device UDC support */
-
-static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
-	.pullup_pin = S3C2410_GPC(5),
-};
-
-
-/* LCD timing and setup */
-
-/*
- * This macro simplifies the table bellow
- */
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
-			_yres,margin_top,margin_bottom,vsync, refresh) \
-	.width = _xres, \
-	.xres = _xres, \
-	.height = _yres, \
-	.yres = _yres, \
-	.left_margin	= margin_left,	\
-	.right_margin	= margin_right,	\
-	.upper_margin	= margin_top,	\
-	.lower_margin	= margin_bottom,	\
-	.hsync_len	= hsync,	\
-	.vsync_len	= vsync,	\
-	.pixclock	= ((_clock*100000000000LL) /	\
-			   ((refresh) * \
-			   (hsync + margin_left + _xres + margin_right) * \
-			   (vsync + margin_top + _yres + margin_bottom))), \
-	.bpp		= 16,\
-	.type		= (S3C2410_LCDCON1_TFT16BPP |\
-			   S3C2410_LCDCON1_TFT)
-
-static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
-	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
-		_LCD_DECLARE(
-			7,			/* The 3.5 is quite fast */
-			240, 21, 38, 6, 	/* x timing */
-			320, 4, 4, 2,		/* y timing */
-			60),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	[1] = { /* mini2440 + 7" TFT + touchscreen */
-		_LCD_DECLARE(
-			10,			/* the 7" runs slower */
-			800, 40, 40, 48, 	/* x timing */
-			480, 29, 3, 3,		/* y timing */
-			50),			/* refresh rate */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_PWREN),
-	},
-	/* The VGA shield can outout at several resolutions. All share 
-	 * the same timings, however, anything smaller than 1024x768
-	 * will only be displayed in the top left corner of a 1024x768
-	 * XGA output unless you add optional dip switches to the shield.
-	 * Therefore timings for other resolutions have been omitted here.
-	 */
-	[2] = {
-		_LCD_DECLARE(
-			10,
-			1024, 1, 2, 2,		/* y timing */
-			768, 200, 16, 16, 	/* x timing */
-			24),	/* refresh rate, maximum stable,
-				 tested with the FPGA shield */
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-	/* mini2440 + 3.5" TFT (LCD-W35i, LQ035Q1DG06 type) + touchscreen*/
-	[3] = {
-		_LCD_DECLARE(
-			/* clock */
-			7,
-			/* xres, margin_right, margin_left, hsync */
-			320, 68, 66, 4,
-			/* yres, margin_top, margin_bottom, vsync */
-			240, 4, 4, 9,
-			/* refresh rate */
-			60),
-		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
-				   S3C2410_LCDCON5_INVVDEN |
-				   S3C2410_LCDCON5_INVVFRAME |
-				   S3C2410_LCDCON5_INVVLINE |
-				   S3C2410_LCDCON5_INVVCLK |
-				   S3C2410_LCDCON5_HWSWP),
-	},
-};
-
-/* todo - put into gpio header */
-
-#define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
-#define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
-
-static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
-	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
-	.num_displays	 = 1,
-	.default_display = 0,
-
-	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
-	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
-
-	.gpcup		= (0xf << 1) | (0x3f << 10),
-
-	.gpccon		= (S3C2410_GPC1_VCLK   | S3C2410_GPC2_VLINE |
-			   S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM |
-			   S3C2410_GPC10_VD2   | S3C2410_GPC11_VD3 |
-			   S3C2410_GPC12_VD4   | S3C2410_GPC13_VD5 |
-			   S3C2410_GPC14_VD6   | S3C2410_GPC15_VD7),
-
-	.gpccon_mask	= (S3C2410_GPCCON_MASK(1)  | S3C2410_GPCCON_MASK(2)  |
-			   S3C2410_GPCCON_MASK(3)  | S3C2410_GPCCON_MASK(4)  |
-			   S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) |
-			   S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) |
-			   S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)),
-
-	.gpdup		= (0x3f << 2) | (0x3f << 10),
-
-	.gpdcon		= (S3C2410_GPD2_VD10  | S3C2410_GPD3_VD11 |
-			   S3C2410_GPD4_VD12  | S3C2410_GPD5_VD13 |
-			   S3C2410_GPD6_VD14  | S3C2410_GPD7_VD15 |
-			   S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 |
-			   S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 |
-			   S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23),
-
-	.gpdcon_mask	= (S3C2410_GPDCON_MASK(2)  | S3C2410_GPDCON_MASK(3) |
-			   S3C2410_GPDCON_MASK(4)  | S3C2410_GPDCON_MASK(5) |
-			   S3C2410_GPDCON_MASK(6)  | S3C2410_GPDCON_MASK(7) |
-			   S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)|
-			   S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)|
-			   S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)),
-};
-
-/* MMC/SD  */
-
-static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-   .gpio_detect   = S3C2410_GPG(8),
-   .gpio_wprotect = S3C2410_GPH(8),
-   .set_power     = NULL,
-   .ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
-};
-
-/* NAND Flash on MINI2440 board */
-
-static struct mtd_partition mini2440_default_nand_part[] __initdata = {
-	[0] = {
-		.name	= "u-boot",
-		.size	= SZ_256K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "u-boot-env",
-		.size	= SZ_128K,
-		.offset	= SZ_256K,
-	},
-	[2] = {
-		.name	= "kernel",
-		/* 5 megabytes, for a kernel with no modules
-		 * or a uImage with a ramdisk attached */
-		.size	= 0x00500000,
-		.offset	= SZ_256K + SZ_128K,
-	},
-	[3] = {
-		.name	= "root",
-		.offset	= SZ_256K + SZ_128K + 0x00500000,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
-	[0] = {
-		.name		= "nand",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
-		.partitions	= mini2440_default_nand_part,
-		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
-	},
-};
-
-static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
-	.sets		= mini2440_nand_sets,
-	.ignore_unset_ecc = 1,
-};
-
-/* DM9000AEP 10/100 ethernet controller */
-
-static struct resource mini2440_dm9k_resource[] = {
-	[0] = {
-		.start = MACH_MINI2440_DM9K_BASE,
-		.end   = MACH_MINI2440_DM9K_BASE + 3,
-		.flags = IORESOURCE_MEM
-	},
-	[1] = {
-		.start = MACH_MINI2440_DM9K_BASE + 4,
-		.end   = MACH_MINI2440_DM9K_BASE + 7,
-		.flags = IORESOURCE_MEM
-	},
-	[2] = {
-		.start = IRQ_EINT7,
-		.end   = IRQ_EINT7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-/*
- * The DM9000 has no eeprom, and it's MAC address is set by
- * the bootloader before starting the kernel.
- */
-static struct dm9000_plat_data mini2440_dm9k_pdata = {
-	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
-};
-
-static struct platform_device mini2440_device_eth = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
-	.resource	= mini2440_dm9k_resource,
-	.dev		= {
-		.platform_data	= &mini2440_dm9k_pdata,
-	},
-};
-
-/*  CON5
- *	+--+	 /-----\
- *	|  |    |	|
- *	|  |	|  BAT	|
- *	|  |	 \_____/
- *	|  |
- *	|  |  +----+  +----+
- *	|  |  | K5 |  | K1 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K4 |  | K2 |
- *	|  |  +----+  +----+
- *	|  |  +----+  +----+
- *	|  |  | K6 |  | K3 |
- *	|  |  +----+  +----+
- *	  .....
- */
-static struct gpio_keys_button mini2440_buttons[] = {
-	{
-		.gpio		= S3C2410_GPG(0),		/* K1 */
-		.code		= KEY_F1,
-		.desc		= "Button 1",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(3),		/* K2 */
-		.code		= KEY_F2,
-		.desc		= "Button 2",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(5),		/* K3 */
-		.code		= KEY_F3,
-		.desc		= "Button 3",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(6),		/* K4 */
-		.code		= KEY_POWER,
-		.desc		= "Power",
-		.active_low	= 1,
-	},
-	{
-		.gpio		= S3C2410_GPG(7),		/* K5 */
-		.code		= KEY_F5,
-		.desc		= "Button 5",
-		.active_low	= 1,
-	},
-#if 0
-	/* this pin is also known as TCLK1 and seems to already
-	 * marked as "in use" somehow in the kernel -- possibly wrongly */
-	{
-		.gpio		= S3C2410_GPG(11),	/* K6 */
-		.code		= KEY_F6,
-		.desc		= "Button 6",
-		.active_low	= 1,
-	},
-#endif
-};
-
-static struct gpio_keys_platform_data mini2440_button_data = {
-	.buttons	= mini2440_buttons,
-	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
-};
-
-static struct platform_device mini2440_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &mini2440_button_data,
-	}
-};
-
-/* LEDS */
-
-static struct s3c24xx_led_platdata mini2440_led1_pdata = {
-	.name		= "led1",
-	.gpio		= S3C2410_GPB(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "heartbeat",
-};
-
-static struct s3c24xx_led_platdata mini2440_led2_pdata = {
-	.name		= "led2",
-	.gpio		= S3C2410_GPB(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "nand-disk",
-};
-
-static struct s3c24xx_led_platdata mini2440_led3_pdata = {
-	.name		= "led3",
-	.gpio		= S3C2410_GPB(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "mmc0",
-};
-
-static struct s3c24xx_led_platdata mini2440_led4_pdata = {
-	.name		= "led4",
-	.gpio		= S3C2410_GPB(8),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.def_trigger	= "",
-};
-
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
-	.name		= "backlight",
-	.gpio		= S3C2410_GPG(4),
-	.def_trigger	= "backlight",
-};
-
-static struct platform_device mini2440_led1 = {
-	.name		= "s3c24xx_led",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &mini2440_led1_pdata,
-	},
-};
-
-static struct platform_device mini2440_led2 = {
-	.name		= "s3c24xx_led",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &mini2440_led2_pdata,
-	},
-};
-
-static struct platform_device mini2440_led3 = {
-	.name		= "s3c24xx_led",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &mini2440_led3_pdata,
-	},
-};
-
-static struct platform_device mini2440_led4 = {
-	.name		= "s3c24xx_led",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &mini2440_led4_pdata,
-	},
-};
-
-static struct platform_device mini2440_led_backlight = {
-	.name		= "s3c24xx_led",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &mini2440_led_backlight_pdata,
-	},
-};
-
-/* AUDIO */
-
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
-	.l3_clk = S3C2410_GPB(4),
-	.l3_mode = S3C2410_GPB(2),
-	.l3_data = S3C2410_GPB(3),
-	.model = UDA134X_UDA1341
-};
-
-static struct platform_device mini2440_audio = {
-	.name		= "s3c24xx_uda134x",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &mini2440_audio_pins,
-	},
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c08 = {
-	.byte_len	= SZ_8K / 8,
-	.page_size	= 16,
-};
-
-static struct i2c_board_info mini2440_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("24c08", 0x50),
-		.platform_data = &at24c08,
-	},
-};
-
-static struct platform_device uda1340_codec = {
-		.name = "uda134x-codec",
-		.id = -1,
-};
-
-static struct platform_device *mini2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_usbgadget,
-	&mini2440_device_eth,
-	&mini2440_led1,
-	&mini2440_led2,
-	&mini2440_led3,
-	&mini2440_led4,
-	&mini2440_button_device,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_iis,
-	&uda1340_codec,
-	&mini2440_audio,
-	&samsung_asoc_dma,
-};
-
-static void __init mini2440_map_io(void)
-{
-	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
-}
-
-/*
- * mini2440_features string
- *
- * t = Touchscreen present
- * b = backlight control
- * c = camera [TODO]
- * 0-9 LCD configuration
- *
- */
-static char mini2440_features_str[12] __initdata = "0tb";
-
-static int __init mini2440_features_setup(char *str)
-{
-	if (str)
-		strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
-	return 1;
-}
-
-__setup("mini2440=", mini2440_features_setup);
-
-#define FEATURE_SCREEN (1 << 0)
-#define FEATURE_BACKLIGHT (1 << 1)
-#define FEATURE_TOUCH (1 << 2)
-#define FEATURE_CAMERA (1 << 3)
-
-struct mini2440_features_t {
-	int count;
-	int done;
-	int lcd_index;
-	struct platform_device *optional[8];
-};
-
-static void __init mini2440_parse_features(
-		struct mini2440_features_t * features,
-		const char * features_str )
-{
-	const char * fp = features_str;
-
-	features->count = 0;
-	features->done = 0;
-	features->lcd_index = -1;
-
-	while (*fp) {
-		char f = *fp++;
-
-		switch (f) {
-		case '0'...'9':	/* tft screen */
-			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"screen type already set\n", f);
-			} else {
-				int li = f - '0';
-				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
-					printk(KERN_INFO "MINI2440: "
-						"'%c' out of range LCD mode\n", f);
-				else {
-					features->optional[features->count++] =
-							&s3c_device_lcd;
-					features->lcd_index = li;
-				}
-			}
-			features->done |= FEATURE_SCREEN;
-			break;
-		case 'b':
-			if (features->done & FEATURE_BACKLIGHT)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"backlight already set\n", f);
-			else {
-				features->optional[features->count++] =
-						&mini2440_led_backlight;
-			}
-			features->done |= FEATURE_BACKLIGHT;
-			break;
-		case 't':
-			printk(KERN_INFO "MINI2440: '%c' ignored, "
-				"touchscreen not compiled in\n", f);
-			break;
-		case 'c':
-			if (features->done & FEATURE_CAMERA)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"camera already registered\n", f);
-			else
-				features->optional[features->count++] =
-					&s3c_device_camif;
-			features->done |= FEATURE_CAMERA;
-			break;
-		}
-	}
-}
-
-static void __init mini2440_init(void)
-{
-	struct mini2440_features_t features = { 0 };
-	int i;
-
-	printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
-			mini2440_features_str);
-
-	/* Parse the feature string */
-	mini2440_parse_features(&features, mini2440_features_str);
-
-	/* turn LCD on */
-	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
-
-	/* Turn the backlight early on */
-	WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
-	gpio_direction_output(S3C2410_GPG(4), 1);
-
-	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
-	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
-
-	/* mark the key as input, without pullups (there is one on the board) */
-	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
-		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
-	}
-	if (features.lcd_index != -1) {
-		int li;
-
-		mini2440_fb_info.displays =
-			&mini2440_lcd_cfg[features.lcd_index];
-
-		printk(KERN_INFO "MINI2440: LCD");
-		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
-			if (li == features.lcd_index)
-				printk(" [%d:%dx%d]", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-			else
-				printk(" %d:%dx%d", li,
-					mini2440_lcd_cfg[li].width,
-					mini2440_lcd_cfg[li].height);
-		printk("\n");
-		s3c24xx_fb_set_platdata(&mini2440_fb_info);
-	}
-
-	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
-	s3c24xx_mci_set_platdata(&mini2440_mmc_cfg);
-	s3c_nand_set_platdata(&mini2440_nand_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	i2c_register_board_info(0, mini2440_i2c_devs,
-				ARRAY_SIZE(mini2440_i2c_devs));
-
-	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
-
-	if (features.count)	/* the optional features */
-		platform_add_devices(features.optional, features.count);
-
-}
-
-
-MACHINE_START(MINI2440, "MINI2440")
-	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.atag_offset	= 0x100,
-	.map_io		= mini2440_map_io,
-	.init_machine	= mini2440_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
deleted file mode 100644
index 5198e3e1c5b..00000000000
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
- *
- * Copyright (c) 2004 Nex Vision
- *   Guillaume GOURAT <guillaume.gourat@nexvision.tv>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Modifications:
- *     15-10-2004 GG  Created initial version
- *     12-03-2005 BJD Updated for release
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/string.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mtd/map.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/setup.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-//#include <asm/debug-ll.h>
-#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
-#include <plat/iic.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-static struct map_desc nexcoder_iodesc[] __initdata = {
-	/* nothing here yet */
-};
-
-#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG12 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg nexcoder_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	}
-};
-
-/* NOR Flash on NexVision NexCoder 2440 board */
-
-static struct resource nexcoder_nor_resource[] = {
-	[0] = {
-		.start = S3C2410_CS0,
-		.end   = S3C2410_CS0 + (8*1024*1024) - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-static struct map_info nexcoder_nor_map = {
-	.bankwidth = 2,
-};
-
-static struct platform_device nexcoder_device_nor = {
-	.name		= "mtd-flash",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(nexcoder_nor_resource),
-	.resource	= nexcoder_nor_resource,
-	.dev =
-	{
-		.platform_data = &nexcoder_nor_map,
-	}
-};
-
-/* Standard Nexcoder devices */
-
-static struct platform_device *nexcoder_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
- 	&s3c_device_rtc,
-	&s3c_device_camif,
-	&s3c_device_spi0,
-	&s3c_device_spi1,
-	&nexcoder_device_nor,
-};
-
-static void __init nexcoder_sensorboard_init(void)
-{
-	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
-	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
-	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
-
-	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
-	s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
-}
-
-static void __init nexcoder_map_io(void)
-{
-	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
-
-	nexcoder_sensorboard_init();
-}
-
-static void __init nexcoder_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices));
-};
-
-MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
-	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.atag_offset	= 0x100,
-	.map_io		= nexcoder_map_io,
-	.init_machine	= nexcoder_init,
-	.init_irq	= s3c24xx_init_irq,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
deleted file mode 100644
index ad2792dfbee..00000000000
--- a/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
- *
- * Copyright (c) 2009 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * Simtec Osiris Dynamic Voltage Scaling support.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/cpufreq.h>
-#include <linux/gpio.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <plat/cpu-freq.h>
-
-#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
-
-static bool dvs_en;
-
-static void osiris_dvs_tps_setdvs(bool on)
-{
-	unsigned vregs1 = 0, vdcdc2 = 0;
-
-	if (!on) {
-		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
-		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
-	}
-
-	dvs_en = on;
-	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
-	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
-
-	tps65010_config_vregs1(vregs1);
-	tps65010_config_vdcdc2(vdcdc2);
-}
-
-static bool is_dvs(struct s3c_freq *f)
-{
-	/* at the moment, we assume ARMCLK = HCLK => DVS */
-	return f->armclk == f->hclk;
-}
-
-/* keep track of current state */
-static bool cur_dvs = false;
-
-static int osiris_dvs_notify(struct notifier_block *nb,
-			      unsigned long val, void *data)
-{
-	struct cpufreq_freqs *cf = data;
-	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
-	bool old_dvs = is_dvs(&freqs->old);
-	bool new_dvs = is_dvs(&freqs->new);
-	int ret = 0;
-
-	if (!dvs_en)
-		return 0;
-
-	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
-	       freqs->old.armclk, freqs->old.hclk,
-	       freqs->new.armclk, freqs->new.hclk);
-
-	switch (val) {
-	case CPUFREQ_PRECHANGE:
-		if (old_dvs & !new_dvs ||
-		    cur_dvs & !new_dvs) {
-			pr_debug("%s: exiting dvs\n", __func__);
-			cur_dvs = false;
-			gpio_set_value(OSIRIS_GPIO_DVS, 1);
-		}
-		break;
-	case CPUFREQ_POSTCHANGE:
-		if (!old_dvs & new_dvs ||
-		    !cur_dvs & new_dvs) {
-			pr_debug("entering dvs\n");
-			cur_dvs = true;
-			gpio_set_value(OSIRIS_GPIO_DVS, 0);
-		}
-		break;
-	}
-
-	return ret;
-}
-
-static struct notifier_block osiris_dvs_nb = {
-	.notifier_call	= osiris_dvs_notify,
-};
-
-static int __devinit osiris_dvs_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	dev_info(&pdev->dev, "initialising\n");
-
-	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
-	if (ret) {
-		dev_err(&pdev->dev, "cannot claim gpio\n");
-		goto err_nogpio;
-	}
-
-	/* start with dvs disabled */
-	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
-
-	ret = cpufreq_register_notifier(&osiris_dvs_nb,
-					CPUFREQ_TRANSITION_NOTIFIER);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register with cpufreq\n");
-		goto err_nofreq;
-	}
-
-	osiris_dvs_tps_setdvs(true);
-
-	return 0;
-
-err_nofreq:
-	gpio_free(OSIRIS_GPIO_DVS);
-
-err_nogpio:
-	return ret;
-}
-
-static int __devexit osiris_dvs_remove(struct platform_device *pdev)
-{
-	dev_info(&pdev->dev, "exiting\n");
-
-	/* disable any current dvs */
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-
-	cpufreq_unregister_notifier(&osiris_dvs_nb,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-
-	gpio_free(OSIRIS_GPIO_DVS);
-
-	return 0;
-}
-
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
- * out if the configuration isn't set. */
-
-static int osiris_dvs_suspend(struct device *dev)
-{
-	gpio_set_value(OSIRIS_GPIO_DVS, 1);
-	osiris_dvs_tps_setdvs(false);
-	cur_dvs = false;
-
-	return 0;
-}
-
-static int osiris_dvs_resume(struct device *dev)
-{
-	osiris_dvs_tps_setdvs(true);
-	return 0;
-}
-
-static const struct dev_pm_ops osiris_dvs_pm = {
-	.suspend	= osiris_dvs_suspend,
-	.resume		= osiris_dvs_resume,
-};
-
-static struct platform_driver osiris_dvs_driver = {
-	.probe		= osiris_dvs_probe,
-	.remove		= __devexit_p(osiris_dvs_remove),
-	.driver		= {
-		.name	= "osiris-dvs",
-		.owner	= THIS_MODULE,
-		.pm	= &osiris_dvs_pm,
-	},
-};
-
-static int __init osiris_dvs_init(void)
-{
-	return platform_driver_register(&osiris_dvs_driver);
-}
-
-static void __exit osiris_dvs_exit(void)
-{
-	platform_driver_unregister(&osiris_dvs_driver);
-}
-
-module_init(osiris_dvs_init);
-module_exit(osiris_dvs_exit);
-
-MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
deleted file mode 100644
index c5daeb612a8..00000000000
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
- * Copyright (c) 2005-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/clk.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-
-#include <linux/i2c/tps65010.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include "common.h"
-
-/* onboard perihperal map */
-
-static struct map_desc osiris_iodesc[] __initdata = {
-  /* ISA IO areas (may be over-written later) */
-
-  {
-	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
-	  .pfn		= __phys_to_pfn(S3C2410_CS5),
-	  .length	= SZ_16M,
-	  .type		= MT_DEVICE,
-  },
-
-  /* CPLD control registers */
-
-  {
-	  .virtual	= (u32)OSIRIS_VA_CTRL0,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL0),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL1,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL1),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_CTRL2,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_CTRL2),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  }, {
-	  .virtual	= (u32)OSIRIS_VA_IDREG,
-	  .pfn		= __phys_to_pfn(OSIRIS_PA_IDREG),
-	  .length	= SZ_16K,
-	  .type		= MT_DEVICE,
-  },
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
-	}
-};
-
-/* NAND Flash on Osiris board */
-
-static int external_map[]   = { 2 };
-static int chip0_map[]      = { 0 };
-static int chip1_map[]      = { 1 };
-
-static struct mtd_partition __initdata osiris_default_nand_part[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_16K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_16K,
-		.offset	= SZ_16K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
-	[0] = {
-		.name	= "Boot Agent",
-		.size	= SZ_128K,
-		.offset	= 0,
-	},
-	[1] = {
-		.name	= "/boot",
-		.size	= SZ_4M - SZ_128K,
-		.offset	= SZ_128K,
-	},
-	[2] = {
-		.name	= "user1",
-		.offset	= SZ_4M,
-		.size	= SZ_32M - SZ_4M,
-	},
-	[3] = {
-		.name	= "user2",
-		.offset	= SZ_32M,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-/* the Osiris has 3 selectable slots for nand-flash, the two
- * on-board chip areas, as well as the external slot.
- *
- * Note, there is no current hot-plug support for the External
- * socket.
-*/
-
-static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
-	[1] = {
-		.name		= "External",
-		.nr_chips	= 1,
-		.nr_map		= external_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[0] = {
-		.name		= "chip0",
-		.nr_chips	= 1,
-		.nr_map		= chip0_map,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-	[2] = {
-		.name		= "chip1",
-		.nr_chips	= 1,
-		.nr_map		= chip1_map,
-		.options	= NAND_SCAN_SILENT_NODEV,
-		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
-		.partitions	= osiris_default_nand_part,
-	},
-};
-
-static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
-{
-	unsigned int tmp;
-
-	slot = set->nr_map[slot] & 3;
-
-	pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
-		 slot, set, set->nr_map);
-
-	tmp = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp &= ~OSIRIS_CTRL0_NANDSEL;
-	tmp |= slot;
-
-	pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-}
-
-static struct s3c2410_platform_nand __initdata osiris_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 60,
-	.twrph1		= 60,
-	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
-	.sets		= osiris_nand_sets,
-	.select_chip	= osiris_nand_select,
-};
-
-/* PCMCIA control and configuration */
-
-static struct resource osiris_pcmcia_resource[] = {
-	[0] = {
-		.start	= 0x0f000000,
-		.end	= 0x0f100000,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x0c000000,
-		.end	= 0x0c100000,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device osiris_pcmcia = {
-	.name		= "osiris-pcmcia",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(osiris_pcmcia_resource),
-	.resource	= osiris_pcmcia_resource,
-};
-
-/* Osiris power management device */
-
-#ifdef CONFIG_PM
-static unsigned char pm_osiris_ctrl0;
-
-static int osiris_pm_suspend(void)
-{
-	unsigned int tmp;
-
-	pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
-	tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
-
-	/* ensure correct NAND slot is selected on resume */
-	if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
-	        tmp |= 2;
-
-	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
-
-	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
-	return 0;
-}
-
-static void osiris_pm_resume(void)
-{
-	if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
-		__raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
-
-	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
-
-	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
-}
-
-#else
-#define osiris_pm_suspend NULL
-#define osiris_pm_resume NULL
-#endif
-
-static struct syscore_ops osiris_pm_syscore_ops = {
-	.suspend	= osiris_pm_suspend,
-	.resume		= osiris_pm_resume,
-};
-
-/* Link for DVS driver to TPS65011 */
-
-static void osiris_tps_release(struct device *dev)
-{
-	/* static device, do not need to release anything */
-}
-
-static struct platform_device osiris_tps_device = {
-	.name	= "osiris-dvs",
-	.id	= -1,
-	.dev.release = osiris_tps_release,
-};
-
-static int osiris_tps_setup(struct i2c_client *client, void *context)
-{
-	osiris_tps_device.dev.parent = &client->dev;
-	return platform_device_register(&osiris_tps_device);
-}
-
-static int osiris_tps_remove(struct i2c_client *client, void *context)
-{
-	platform_device_unregister(&osiris_tps_device);
-	return 0;
-}
-
-static struct tps65010_board osiris_tps_board = {
-	.base		= -1,	/* GPIO can go anywhere at the moment */
-	.setup		= osiris_tps_setup,
-	.teardown	= osiris_tps_remove,
-};
-
-/* I2C devices fitted. */
-
-static struct i2c_board_info osiris_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tps65011", 0x48),
-		.irq	= IRQ_EINT20,
-		.platform_data = &osiris_tps_board,
-	},
-};
-
-/* Standard Osiris devices */
-
-static struct platform_device *osiris_devices[] __initdata = {
-	&s3c_device_i2c0,
-	&s3c_device_wdt,
-	&s3c_device_nand,
-	&osiris_pcmcia,
-};
-
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
-static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
-	.refresh	= 7800, /* refresh period is 7.8usec */
-	.auto_io	= 1,
-	.need_io	= 1,
-};
-
-static void __init osiris_map_io(void)
-{
-	unsigned long flags;
-
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
-	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
-	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
-
-	/* check for the newer revision boards with large page nand */
-
-	if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
-		printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
-		       __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
-		osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
-		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
-	} else {
-		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
-	}
-
-	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
-
-	local_irq_save(flags);
-	__raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
-	local_irq_restore(flags);
-}
-
-static void __init osiris_init(void)
-{
-	register_syscore_ops(&osiris_pm_syscore_ops);
-
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&osiris_nand_info);
-
-	s3c_cpufreq_setboard(&osiris_cpufreq);
-
-	i2c_register_board_info(0, osiris_i2c_devs,
-				ARRAY_SIZE(osiris_i2c_devs));
-
-	platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
-};
-
-MACHINE_START(OSIRIS, "Simtec-OSIRIS")
-	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.atag_offset	= 0x100,
-	.map_io		= osiris_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= osiris_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
deleted file mode 100644
index 6f68abf44fa..00000000000
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
- * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
- * Copyright (c) 2007-2010 Vasily Khoruzhick
- *
- * based on smdk2440 written by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/device.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/pwm.h>
-#include <linux/s3c_adc_battery.h>
-#include <linux/leds.h>
-#include <linux/i2c.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/mmc/host.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-#include <plat/ts.h>
-
-#include <sound/uda1380.h>
-
-#include "common.h"
-
-#define LCD_PWM_PERIOD 192960
-#define LCD_PWM_DUTY 127353
-
-static struct map_desc rx1950_iodesc[] __initdata = {
-};
-
-static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
-	[0] = {
-	       .hwport = 0,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-	       .hwport = 1,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x03,
-	       .ufcon = 0x51,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-	       .hwport = 2,
-	       .flags = 0,
-	       .ucon = 0x3c5,
-	       .ulcon = 0x43,
-	       .ufcon = 0xf1,
-		.clk_sel = S3C2410_UCON_CLKSEL3,
-	},
-};
-
-static struct s3c2410fb_display rx1950_display = {
-	.type = S3C2410_LCDCON1_TFT,
-	.width = 240,
-	.height = 320,
-	.xres = 240,
-	.yres = 320,
-	.bpp = 16,
-
-	.pixclock = 260000,
-	.left_margin = 10,
-	.right_margin = 20,
-	.hsync_len = 10,
-	.upper_margin = 2,
-	.lower_margin = 2,
-	.vsync_len = 2,
-
-	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
-			   S3C2410_LCDCON5_INVVCLK |
-			   S3C2410_LCDCON5_INVVLINE |
-			   S3C2410_LCDCON5_INVVFRAME |
-			   S3C2410_LCDCON5_HWSWP |
-			   (0x02 << 13) |
-			   (0x02 << 15),
-
-};
-
-static int power_supply_init(struct device *dev)
-{
-	return gpio_request(S3C2410_GPF(2), "cable plugged");
-}
-
-static int rx1950_is_ac_online(void)
-{
-	return !gpio_get_value(S3C2410_GPF(2));
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(S3C2410_GPF(2));
-}
-
-static char *rx1950_supplicants[] = {
-	"main-battery"
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= rx1950_is_ac_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= rx1950_supplicants,
-	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
-};
-
-static struct resource power_supply_resources[] = {
-	[0] = {
-			.name	= "ac",
-			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
-					  IORESOURCE_IRQ_HIGHEDGE,
-			.start	= IRQ_EINT2,
-			.end	= IRQ_EINT2,
-	},
-};
-
-static struct platform_device power_supply = {
-	.name			= "pda-power",
-	.id			= -1,
-	.dev			= {
-					.platform_data =
-						&power_supply_info,
-	},
-	.resource		= power_supply_resources,
-	.num_resources		= ARRAY_SIZE(power_supply_resources),
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
-	{ .volt = 4100, .cur = 156, .level = 100},
-	{ .volt = 4050, .cur = 156, .level = 95},
-	{ .volt = 4025, .cur = 141, .level = 90},
-	{ .volt = 3995, .cur = 144, .level = 85},
-	{ .volt = 3957, .cur = 162, .level = 80},
-	{ .volt = 3931, .cur = 147, .level = 75},
-	{ .volt = 3902, .cur = 147, .level = 70},
-	{ .volt = 3863, .cur = 153, .level = 65},
-	{ .volt = 3838, .cur = 150, .level = 60},
-	{ .volt = 3800, .cur = 153, .level = 55},
-	{ .volt = 3765, .cur = 153, .level = 50},
-	{ .volt = 3748, .cur = 172, .level = 45},
-	{ .volt = 3740, .cur = 153, .level = 40},
-	{ .volt = 3714, .cur = 175, .level = 35},
-	{ .volt = 3710, .cur = 156, .level = 30},
-	{ .volt = 3963, .cur = 156, .level = 25},
-	{ .volt = 3672, .cur = 178, .level = 20},
-	{ .volt = 3651, .cur = 178, .level = 15},
-	{ .volt = 3629, .cur = 178, .level = 10},
-	{ .volt = 3612, .cur = 162, .level = 5},
-	{ .volt = 3605, .cur = 162, .level = 0},
-};
-
-static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
-	{ .volt = 4200, .cur = 0, .level = 100},
-	{ .volt = 4190, .cur = 0, .level = 99},
-	{ .volt = 4178, .cur = 0, .level = 95},
-	{ .volt = 4110, .cur = 0, .level = 70},
-	{ .volt = 4076, .cur = 0, .level = 65},
-	{ .volt = 4046, .cur = 0, .level = 60},
-	{ .volt = 4021, .cur = 0, .level = 55},
-	{ .volt = 3999, .cur = 0, .level = 50},
-	{ .volt = 3982, .cur = 0, .level = 45},
-	{ .volt = 3965, .cur = 0, .level = 40},
-	{ .volt = 3957, .cur = 0, .level = 35},
-	{ .volt = 3948, .cur = 0, .level = 30},
-	{ .volt = 3936, .cur = 0, .level = 25},
-	{ .volt = 3927, .cur = 0, .level = 20},
-	{ .volt = 3906, .cur = 0, .level = 15},
-	{ .volt = 3880, .cur = 0, .level = 10},
-	{ .volt = 3829, .cur = 0, .level = 5},
-	{ .volt = 3820, .cur = 0, .level = 0},
-};
-
-int rx1950_bat_init(void)
-{
-	int ret;
-
-	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
-	if (ret)
-		goto err_gpio1;
-	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
-	if (ret)
-		goto err_gpio2;
-
-	return 0;
-
-err_gpio2:
-	gpio_free(S3C2410_GPJ(2));
-err_gpio1:
-	return ret;
-}
-
-void rx1950_bat_exit(void)
-{
-	gpio_free(S3C2410_GPJ(2));
-	gpio_free(S3C2410_GPJ(3));
-}
-
-void rx1950_enable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 1);
-	gpio_direction_output(S3C2410_GPJ(3), 1);
-}
-
-void rx1950_disable_charger(void)
-{
-	gpio_direction_output(S3C2410_GPJ(2), 0);
-	gpio_direction_output(S3C2410_GPJ(3), 0);
-}
-
-DEFINE_SPINLOCK(rx1950_blink_spin);
-
-static int rx1950_led_blink_set(unsigned gpio, int state,
-	unsigned long *delay_on, unsigned long *delay_off)
-{
-	int blink_gpio, check_gpio;
-
-	switch (gpio) {
-	case S3C2410_GPA(6):
-		blink_gpio = S3C2410_GPA(4);
-		check_gpio = S3C2410_GPA(3);
-		break;
-	case S3C2410_GPA(7):
-		blink_gpio = S3C2410_GPA(3);
-		check_gpio = S3C2410_GPA(4);
-		break;
-	default:
-		return -EINVAL;
-		break;
-	}
-
-	if (delay_on && delay_off && !*delay_on && !*delay_off)
-		*delay_on = *delay_off = 500;
-
-	spin_lock(&rx1950_blink_spin);
-
-	switch (state) {
-	case GPIO_LED_NO_BLINK_LOW:
-	case GPIO_LED_NO_BLINK_HIGH:
-		if (!gpio_get_value(check_gpio))
-			gpio_set_value(S3C2410_GPJ(6), 0);
-		gpio_set_value(blink_gpio, 0);
-		gpio_set_value(gpio, state);
-		break;
-	case GPIO_LED_BLINK:
-		gpio_set_value(gpio, 0);
-		gpio_set_value(S3C2410_GPJ(6), 1);
-		gpio_set_value(blink_gpio, 1);
-		break;
-	}
-
-	spin_unlock(&rx1950_blink_spin);
-
-	return 0;
-}
-
-static struct gpio_led rx1950_leds_desc[] = {
-	{
-		.name			= "Green",
-		.default_trigger	= "main-battery-full",
-		.gpio			= S3C2410_GPA(6),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Red",
-		.default_trigger
-			= "main-battery-charging-blink-full-solid",
-		.gpio			= S3C2410_GPA(7),
-		.retain_state_suspended	= 1,
-	},
-	{
-		.name			= "Blue",
-		.default_trigger	= "rx1950-acx-mem",
-		.gpio			= S3C2410_GPA(11),
-		.retain_state_suspended	= 1,
-	},
-};
-
-static struct gpio_led_platform_data rx1950_leds_pdata = {
-	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
-	.leds		= rx1950_leds_desc,
-	.gpio_blink_set	= rx1950_led_blink_set,
-};
-
-static struct platform_device rx1950_leds = {
-	.name	= "leds-gpio",
-	.id		= -1,
-	.dev	= {
-				.platform_data = &rx1950_leds_pdata,
-	},
-};
-
-static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
-	.init = rx1950_bat_init,
-	.exit = rx1950_bat_exit,
-	.enable_charger = rx1950_enable_charger,
-	.disable_charger = rx1950_disable_charger,
-	.gpio_charge_finished = S3C2410_GPF(3),
-	.lut_noac = bat_lut_noac,
-	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
-	.lut_acin = bat_lut_acin,
-	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
-	.volt_channel = 0,
-	.current_channel = 1,
-	.volt_mult = 4235,
-	.current_mult = 2900,
-	.internal_impedance = 200,
-};
-
-static struct platform_device rx1950_battery = {
-	.name             = "s3c-adc-battery",
-	.id               = -1,
-	.dev = {
-		.parent = &s3c_device_adc.dev,
-		.platform_data = &rx1950_bat_cfg,
-	},
-};
-
-static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
-	.displays = &rx1950_display,
-	.num_displays = 1,
-	.default_display = 0,
-
-	.lpcsel = 0x02,
-	.gpccon = 0xaa9556a9,
-	.gpccon_mask = 0xffc003fc,
-	.gpcup = 0x0000ffff,
-	.gpcup_mask = 0xffffffff,
-
-	.gpdcon = 0xaa90aaa1,
-	.gpdcon_mask = 0xffc0fff0,
-	.gpdup = 0x0000fcfd,
-	.gpdup_mask = 0xffffffff,
-
-};
-
-static struct pwm_device *lcd_pwm;
-
-void rx1950_lcd_power(int enable)
-{
-	int i;
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-
-		/* GPC11-GPC15->OUTPUT */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 1);
-
-		/* Wait a bit here... */
-		mdelay(100);
-
-		/* GPD2-GPD7->OUTPUT */
-		/* GPD11-GPD15->OUTPUT */
-		/* GPD2-GPD7->1, GPD11-GPD15->1 */
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 1);
-
-		/* Wait a bit here...*/
-		mdelay(100);
-
-		/* GPB0->OUTPUT, GPB0->0 */
-		gpio_direction_output(S3C2410_GPB(0), 0);
-
-		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
-		for (i = 1; i < 5; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPC15-GPC11->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPC(i), 0);
-
-		/* GPD15-GPD11->0, GPD2->GPD7->0 */
-		for (i = 11; i < 16; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		for (i = 2; i < 8; i++)
-			gpio_direction_output(S3C2410_GPD(i), 0);
-
-		/* GPC6->0, GPC7->0, GPC5->0 */
-		gpio_direction_output(S3C2410_GPC(6), 0);
-		gpio_direction_output(S3C2410_GPC(7), 0);
-		gpio_direction_output(S3C2410_GPC(5), 0);
-
-		/* GPB1->OUTPUT, GPB1->0 */
-		gpio_direction_output(S3C2410_GPB(1), 0);
-		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
-		pwm_disable(lcd_pwm);
-
-		/* GPC0->0, GPC10->0 */
-		gpio_direction_output(S3C2410_GPC(0), 0);
-		gpio_direction_output(S3C2410_GPC(10), 0);
-	} else {
-		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
-		pwm_enable(lcd_pwm);
-
-		gpio_direction_output(S3C2410_GPC(0), 1);
-		gpio_direction_output(S3C2410_GPC(5), 1);
-
-		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
-		gpio_direction_output(S3C2410_GPC(7), 1);
-
-		for (i = 1; i < 5; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
-
-		for (i = 2; i < 8; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		for (i = 11; i < 16; i++)
-			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
-
-		gpio_direction_output(S3C2410_GPC(10), 1);
-		gpio_direction_output(S3C2410_GPC(6), 1);
-	}
-	enabled = enable;
-}
-
-static void rx1950_bl_power(int enable)
-{
-	static int enabled;
-	if (enabled == enable)
-		return;
-	if (!enable) {
-			gpio_direction_output(S3C2410_GPB(0), 0);
-	} else {
-			/* LED driver need a "push" to power on */
-			gpio_direction_output(S3C2410_GPB(0), 1);
-			/* Warm up backlight for one period of PWM.
-			 * Without this trick its almost impossible to
-			 * enable backlight with low brightness value
-			 */
-			ndelay(48000);
-			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
-	}
-	enabled = enable;
-}
-
-static int rx1950_backlight_init(struct device *dev)
-{
-	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
-	lcd_pwm = pwm_request(1, "RX1950 LCD");
-	if (IS_ERR(lcd_pwm)) {
-		dev_err(dev, "Unable to request PWM for LCD power!\n");
-		return PTR_ERR(lcd_pwm);
-	}
-
-	rx1950_lcd_power(1);
-	rx1950_bl_power(1);
-
-	return 0;
-}
-
-static void rx1950_backlight_exit(struct device *dev)
-{
-	rx1950_bl_power(0);
-	rx1950_lcd_power(0);
-
-	pwm_free(lcd_pwm);
-	gpio_free(S3C2410_GPB(0));
-}
-
-
-static int rx1950_backlight_notify(struct device *dev, int brightness)
-{
-	if (!brightness) {
-		rx1950_bl_power(0);
-		rx1950_lcd_power(0);
-	} else {
-		rx1950_lcd_power(1);
-		rx1950_bl_power(1);
-	}
-	return brightness;
-}
-
-static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
-	.max_brightness = 24,
-	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
-	.init = rx1950_backlight_init,
-	.notify = rx1950_backlight_notify,
-	.exit = rx1950_backlight_exit,
-};
-
-static struct platform_device rx1950_backlight = {
-	.name = "pwm-backlight",
-	.dev = {
-		.parent = &s3c_device_timer[0].dev,
-		.platform_data = &rx1950_backlight_data,
-	},
-};
-
-static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
-{
-	switch (power_mode) {
-	case MMC_POWER_OFF:
-		gpio_direction_output(S3C2410_GPJ(1), 0);
-		break;
-	case MMC_POWER_UP:
-	case MMC_POWER_ON:
-		gpio_direction_output(S3C2410_GPJ(1), 1);
-		break;
-	default:
-		break;
-	}
-}
-
-static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
-	.gpio_detect = S3C2410_GPF(5),
-	.gpio_wprotect = S3C2410_GPH(8),
-	.set_power = rx1950_set_mmc_power,
-	.ocr_avail = MMC_VDD_32_33,
-};
-
-static struct mtd_partition rx1950_nand_part[] = {
-	[0] = {
-			.name = "Boot0",
-			.offset = 0,
-			.size = 0x4000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[1] = {
-			.name = "Boot1",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x40000,
-			.mask_flags = MTD_WRITEABLE,
-	},
-	[2] = {
-			.name = "Kernel",
-			.offset = MTDPART_OFS_APPEND,
-			.size = 0x300000,
-			.mask_flags = 0,
-	},
-	[3] = {
-			.name = "Filesystem",
-			.offset = MTDPART_OFS_APPEND,
-			.size = MTDPART_SIZ_FULL,
-			.mask_flags = 0,
-	},
-};
-
-static struct s3c2410_nand_set rx1950_nand_sets[] = {
-	[0] = {
-			.name = "Internal",
-			.nr_chips = 1,
-			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
-			.partitions = rx1950_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand rx1950_nand_info = {
-	.tacls = 25,
-	.twrph0 = 50,
-	.twrph1 = 15,
-	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
-	.sets = rx1950_nand_sets,
-};
-
-static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
-	.vbus_pin = S3C2410_GPG(5),
-	.vbus_pin_inverted = 1,
-	.pullup_pin = S3C2410_GPJ(5),
-};
-
-static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
-	.delay = 10000,
-	.presc = 49,
-	.oversampling_shift = 3,
-};
-
-static struct gpio_keys_button rx1950_gpio_keys_table[] = {
-	{
-		.code		= KEY_POWER,
-		.gpio		= S3C2410_GPF(0),
-		.active_low	= 1,
-		.desc		= "Power button",
-		.wakeup		= 1,
-	},
-	{
-		.code		= KEY_F5,
-		.gpio		= S3C2410_GPF(7),
-		.active_low	= 1,
-		.desc		= "Record button",
-	},
-	{
-		.code		= KEY_F1,
-		.gpio		= S3C2410_GPG(0),
-		.active_low	= 1,
-		.desc		= "Calendar button",
-	},
-	{
-		.code		= KEY_F2,
-		.gpio		= S3C2410_GPG(2),
-		.active_low	= 1,
-		.desc		= "Contacts button",
-	},
-	{
-		.code		= KEY_F3,
-		.gpio		= S3C2410_GPG(3),
-		.active_low	= 1,
-		.desc		= "Mail button",
-	},
-	{
-		.code		= KEY_F4,
-		.gpio		= S3C2410_GPG(7),
-		.active_low	= 1,
-		.desc		= "WLAN button",
-	},
-	{
-		.code		= KEY_LEFT,
-		.gpio		= S3C2410_GPG(10),
-		.active_low	= 1,
-		.desc		= "Left button",
-	},
-	{
-		.code		= KEY_RIGHT,
-		.gpio		= S3C2410_GPG(11),
-		.active_low	= 1,
-		.desc		= "Right button",
-	},
-	{
-		.code		= KEY_UP,
-		.gpio		= S3C2410_GPG(4),
-		.active_low	= 1,
-		.desc		= "Up button",
-	},
-	{
-		.code		= KEY_DOWN,
-		.gpio		= S3C2410_GPG(6),
-		.active_low	= 1,
-		.desc		= "Down button",
-	},
-	{
-		.code		= KEY_ENTER,
-		.gpio		= S3C2410_GPG(9),
-		.active_low	= 1,
-		.desc		= "Ok button"
-	},
-};
-
-static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
-	.buttons = rx1950_gpio_keys_table,
-	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
-};
-
-static struct platform_device rx1950_device_gpiokeys = {
-	.name = "gpio-keys",
-	.dev.platform_data = &rx1950_gpio_keys_data,
-};
-
-static struct uda1380_platform_data uda1380_info = {
-	.gpio_power	= S3C2410_GPJ(0),
-	.gpio_reset	= S3C2410_GPD(0),
-	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
-};
-
-static struct i2c_board_info rx1950_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("uda1380", 0x1a),
-		.platform_data = &uda1380_info,
-	},
-};
-
-static struct platform_device *rx1950_devices[] __initdata = {
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&samsung_asoc_dma,
-	&s3c_device_usbgadget,
-	&s3c_device_rtc,
-	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_adc,
-	&s3c_device_ts,
-	&s3c_device_timer[0],
-	&s3c_device_timer[1],
-	&rx1950_backlight,
-	&rx1950_device_gpiokeys,
-	&power_supply,
-	&rx1950_battery,
-	&rx1950_leds,
-};
-
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
-static void __init rx1950_map_io(void)
-{
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
-	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
-	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
-
-	/* setup PM */
-
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
-#endif
-
-	s3c_pm_init();
-}
-
-static void __init rx1950_init_machine(void)
-{
-	int i;
-
-	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
-	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
-	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
-	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	s3c_nand_set_platdata(&rx1950_nand_info);
-
-	/* Turn off suspend on both USB ports, and switch the
-	 * selectable USB port to USB device mode. */
-	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
-						S3C2410_MISCCR_USBSUSPND0 |
-						S3C2410_MISCCR_USBSUSPND1, 0x0);
-
-	/* mmc power is disabled by default */
-	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
-	gpio_direction_output(S3C2410_GPJ(1), 0);
-
-	for (i = 0; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 10; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
-
-	for (i = 2; i < 8; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	for (i = 11; i < 16; i++)
-		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
-
-	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
-	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
-	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
-	gpio_direction_output(S3C2410_GPA(3), 0);
-	gpio_direction_output(S3C2410_GPA(4), 0);
-	gpio_direction_output(S3C2410_GPJ(6), 0);
-
-	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
-
-	i2c_register_board_info(0, rx1950_i2c_devices,
-		ARRAY_SIZE(rx1950_i2c_devices));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx1950_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-MACHINE_START(RX1950, "HP iPAQ RX1950")
-    /* Maintainers: Vasily Khoruzhick */
-	.atag_offset = 0x100,
-	.map_io = rx1950_map_io,
-	.reserve	= rx1950_reserve,
-	.init_irq = s3c24xx_init_irq,
-	.init_machine = rx1950_init_machine,
-	.timer = &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
deleted file mode 100644
index 56af3544759..00000000000
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.handhelds.org/projects/rx3715.html
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/memblock.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/h1940.h>
-#include <plat/nand.h>
-#include <mach/fb.h>
-
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-#include "common.h"
-
-static struct map_desc rx3715_iodesc[] __initdata = {
-	/* dump ISA space somewhere unused */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS3),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x00,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.uart_flags  = UPF_CONS_FLOW,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-		.clk_sel	= S3C2410_UCON_CLKSEL3,
-	}
-};
-
-/* framebuffer lcd controller information */
-
-static struct s3c2410fb_display rx3715_lcdcfg __initdata = {
-	.lcdcon5 =	S3C2410_LCDCON5_INVVLINE |
-			S3C2410_LCDCON5_FRM565 |
-			S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 260000,
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 36,
-	.right_margin	= 36,
-	.hsync_len	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 7,
-	.vsync_len	= 3,
-};
-
-static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
-
-	.displays =	&rx3715_lcdcfg,
-	.num_displays =	1,
-	.default_display = 0,
-
-	.lpcsel =	0xf82,
-
-	.gpccon =	0xaa955699,
-	.gpccon_mask =	0xffc003cc,
-	.gpcup =	0x0000ffff,
-	.gpcup_mask =	0xffffffff,
-
-	.gpdcon =	0xaa95aaa1,
-	.gpdcon_mask =	0xffc0fff0,
-	.gpdup =	0x0000faff,
-	.gpdup_mask =	0xffffffff,
-};
-
-static struct mtd_partition __initdata rx3715_nand_part[] = {
-	[0] = {
-		.name		= "Whole Flash",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
-	[0] = {
-		.name		= "Internal",
-		.nr_chips	= 1,
-		.nr_partitions	= ARRAY_SIZE(rx3715_nand_part),
-		.partitions	= rx3715_nand_part,
-	},
-};
-
-static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
-	.tacls		= 25,
-	.twrph0		= 50,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
-	.sets		= rx3715_nand_sets,
-};
-
-static struct platform_device *rx3715_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-	&s3c_device_nand,
-};
-
-static void __init rx3715_map_io(void)
-{
-	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
-	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
-}
-
-/* H1940 and RX3715 need to reserve this for suspend */
-static void __init rx3715_reserve(void)
-{
-	memblock_reserve(0x30003000, 0x1000);
-	memblock_reserve(0x30081000, 0x1000);
-}
-
-static void __init rx3715_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
-static void __init rx3715_init_machine(void)
-{
-#ifdef CONFIG_PM_H1940
-	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
-#endif
-	s3c_pm_init();
-
-	s3c_nand_set_platdata(&rx3715_nand_info);
-	s3c24xx_fb_set_platdata(&rx3715_fb_info);
-	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
-}
-
-MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-	.map_io		= rx3715_map_io,
-	.reserve	= rx3715_reserve,
-	.init_irq	= rx3715_init_irq,
-	.init_machine	= rx3715_init_machine,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
deleted file mode 100644
index 83a1036d7dc..00000000000
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * Thanks to Dimity Andric and TomTom for the loan of an SMDK2440.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-lcd.h>
-
-#include <mach/idle.h>
-#include <mach/fb.h>
-#include <plat/iic.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-#include <plat/common-smdk.h>
-
-#include "common.h"
-
-static struct map_desc smdk2440_iodesc[] __initdata = {
-	/* ISA IO Space map (memory space selected by A24) */
-
-	{
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
-		.pfn		= __phys_to_pfn(S3C2410_CS2),
-		.length		= 0x10000,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
-		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
-		.length		= SZ_4M,
-		.type		= MT_DEVICE,
-	}
-};
-
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg smdk2440_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
-	},
-	/* IR port */
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x43,
-		.ufcon	     = 0x51,
-	}
-};
-
-/* LCD driver info */
-
-static struct s3c2410fb_display smdk2440_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 240,
-	.height		= 320,
-
-	.pixclock	= 166667, /* HCLK 60 MHz, divisor 10 */
-	.xres		= 240,
-	.yres		= 320,
-	.bpp		= 16,
-	.left_margin	= 20,
-	.right_margin	= 8,
-	.hsync_len	= 4,
-	.upper_margin	= 8,
-	.lower_margin	= 7,
-	.vsync_len	= 4,
-};
-
-static struct s3c2410fb_mach_info smdk2440_fb_info __initdata = {
-	.displays	= &smdk2440_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-
-#if 0
-	/* currently setup by downloader */
-	.gpccon		= 0xaa940659,
-	.gpccon_mask	= 0xffffffff,
-	.gpcup		= 0x0000ffff,
-	.gpcup_mask	= 0xffffffff,
-	.gpdcon		= 0xaa84aaa0,
-	.gpdcon_mask	= 0xffffffff,
-	.gpdup		= 0x0000faff,
-	.gpdup_mask	= 0xffffffff,
-#endif
-
-	.lpcsel		= ((0xCE6) & ~7) | 1<<4,
-};
-
-static struct platform_device *smdk2440_devices[] __initdata = {
-	&s3c_device_ohci,
-	&s3c_device_lcd,
-	&s3c_device_wdt,
-	&s3c_device_i2c0,
-	&s3c_device_iis,
-};
-
-static void __init smdk2440_map_io(void)
-{
-	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
-	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
-}
-
-static void __init smdk2440_machine_init(void)
-{
-	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
-	s3c_i2c0_set_platdata(NULL);
-
-	platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices));
-	smdk_machine_init();
-}
-
-MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.atag_offset	= 0x100,
-
-	.init_irq	= s3c24xx_init_irq,
-	.map_io		= smdk2440_map_io,
-	.init_machine	= smdk2440_machine_init,
-	.timer		= &s3c24xx_timer,
-	.restart	= s3c244x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
deleted file mode 100644
index 2b3dddb49af..00000000000
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/s3c2440.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct device s3c2440_dev = {
-	.bus		= &s3c2440_subsys,
-};
-
-int __init s3c2440_init(void)
-{
-	printk("S3C2440: Initialising architecture\n");
-
-	/* change irq for watchdog */
-
-	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
-	s3c_device_wdt.resource[1].end   = IRQ_S3C2440_WDT;
-
-	/* register suspend/resume handlers */
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	/* register our system device for everything else */
-
-	return device_register(&s3c2440_dev);
-}
-
-void __init s3c2440_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
deleted file mode 100644
index 22cb7c94a8c..00000000000
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2442 core and lock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-#include <plat/pm.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
-static struct device s3c2442_dev = {
-	.bus		= &s3c2442_subsys,
-};
-
-int __init s3c2442_init(void)
-{
-	printk("S3C2442: Initialising architecture\n");
-
-#ifdef CONFIG_PM
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
-	register_syscore_ops(&s3c244x_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-
-	return device_register(&s3c2442_dev);
-}
-
-void __init s3c2442_map_io(void)
-{
-	s3c244x_map_io();
-
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down;
-}
diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
deleted file mode 100644
index 6d9b688c442..00000000000
--- a/arch/arm/mach-s3c2440/s3c244x-clock.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
deleted file mode 100644
index 5fe8e58d3af..00000000000
--- a/arch/arm/mach-s3c2440/s3c244x-irq.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
-			      struct irq_desc *desc)
-{
-	unsigned int subsrc, submsk;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 11;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			generic_handle_irq(IRQ_S3C2440_CAM_C);
-		}
-		if (subsrc & 2) {
-			generic_handle_irq(IRQ_S3C2440_CAM_P);
-		}
-	}
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
-	s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
-	s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
-	s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
-	.irq_mask	= s3c_irq_cam_mask,
-	.irq_unmask	= s3c_irq_cam_unmask,
-	.irq_ack	= s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned int irqno;
-
-	irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
-				 handle_level_irq);
-	set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
-	/* add chained handler for camera */
-
-	irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
-				 handle_level_irq);
-	irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
-	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
-		irq_set_chip_and_handler(irqno, &s3c_irq_cam,
-					 handle_level_irq);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
-	.name		= "s3c2440_irq",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
-	return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
-	.name		= "s3c2442_irq",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
-	return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
deleted file mode 100644
index d15852f642b..00000000000
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-#include <plat/watchdog-reset.h>
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
-	/* register our io-tables */
-
-	iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
-	/* rename any peripherals used differing from the s3c2410 */
-
-	s3c_device_sdi.name  = "s3c2440-sdi";
-	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_nand_setname("s3c2440-nand");
-	s3c_device_ts.name = "s3c2440-ts";
-	s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
-	.name		= "s3c2440-core",
-	.dev_name	= "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
-	.name		= "s3c2442-core",
-	.dev_name	= "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
-	return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
-	return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM
-static struct sleep_save s3c244x_sleep[] = {
-	SAVE_ITEM(S3C2440_DSC0),
-	SAVE_ITEM(S3C2440_DSC1),
-	SAVE_ITEM(S3C2440_GPJDAT),
-	SAVE_ITEM(S3C2440_GPJCON),
-	SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
-	s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-	return 0;
-}
-
-static void s3c244x_resume(void)
-{
-	s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume  NULL
-#endif
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
-	.suspend	= s3c244x_suspend,
-	.resume		= s3c244x_resume,
-};
-
-void s3c244x_restart(char mode, const char *cmd)
-{
-	if (mode == 's')
-		soft_restart(0);
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
author	Linus Torvalds <torvalds@linux-foundation.org>	2012-03-27 16:03:32 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2012-03-27 16:03:32 -0700
commit	d61b7a572b292e2be409e13b4b3adf475f18fb29 (patch)
tree	e9d30390860147136c05e66abf1edda1bc5b0562 /arch/arm/mach-s3c2440
parent	18d9946bc7e2252fe3c0f2f609ac383c627edefd (diff)
parent	f4e2467bad53023589cbff18dd1ab6e0aa3f004c (diff)