Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The MIPS bits for 3.8.  This also includes a bunch fixes that were
  sitting in the linux-mips.org git tree for a long time.  This pull
  request contains updates to several OCTEON drivers and the board
  support code for BCM47XX, BCM63XX, XLP, XLR, XLS, lantiq, Loongson1B,
  updates to the SSB bus support, MIPS kexec code and adds support for
  kdump.

  When pulling this, there are two expected merge conflicts in
  include/linux/bcma/bcma_driver_chipcommon.h which are trivial to
  resolve, just remove the conflict markers and keep both alternatives."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (90 commits)
  MIPS: PMC-Sierra Yosemite: Remove support.
  VIDEO: Newport Fix console crashes
  MIPS: wrppmc: Fix build of PCI code.
  MIPS: IP22/IP28: Fix build of EISA code.
  MIPS: RB532: Fix build of prom code.
  MIPS: PowerTV: Fix build.
  MIPS: IP27: Correct fucked grammar in ops-bridge.c
  MIPS: Highmem: Fix build error if CONFIG_DEBUG_HIGHMEM is disabled
  MIPS: Fix potencial corruption
  MIPS: Fix for warning from FPU emulation code
  MIPS: Handle COP3 Unusable exception as COP1X for FP emulation
  MIPS: Fix poweroff failure when HOTPLUG_CPU configured.
  MIPS: MT: Fix build with CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
  MIPS: Remove unused smvp.h
  MIPS/EDAC: Improve OCTEON EDAC support.
  MIPS: OCTEON: Add definitions for OCTEON memory contoller registers.
  MIPS: OCTEON: Add OCTEON family definitions to octeon-model.h
  ata: pata_octeon_cf: Use correct byte order for DMA in when built little-endian.
  MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
  MIPS: Remove usage of CEVT_R4K_LIB config option.
  ...

1 files changed, 22 insertions, 7 deletions

diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
index 12963d05da8..c3eeb90b480 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
@@ -53,13 +53,18 @@
 					CKCTL_6338_SAR_EN |		\
 					CKCTL_6338_SPI_EN)
 
-#define CKCTL_6345_CPU_EN		(1 << 0)
-#define CKCTL_6345_BUS_EN		(1 << 1)
-#define CKCTL_6345_EBI_EN		(1 << 2)
-#define CKCTL_6345_UART_EN		(1 << 3)
-#define CKCTL_6345_ADSLPHY_EN		(1 << 4)
-#define CKCTL_6345_ENET_EN		(1 << 7)
-#define CKCTL_6345_USBH_EN		(1 << 8)
+/* BCM6345 clock bits are shifted by 16 on the left, because of the test
+ * control register which is 16-bits wide. That way we do not have any
+ * specific BCM6345 code for handling clocks, and writing 0 to the test
+ * control register is fine.
+ */
+#define CKCTL_6345_CPU_EN		(1 << 16)
+#define CKCTL_6345_BUS_EN		(1 << 17)
+#define CKCTL_6345_EBI_EN		(1 << 18)
+#define CKCTL_6345_UART_EN		(1 << 19)
+#define CKCTL_6345_ADSLPHY_EN		(1 << 20)
+#define CKCTL_6345_ENET_EN		(1 << 23)
+#define CKCTL_6345_USBH_EN		(1 << 24)
 
 #define CKCTL_6345_ALL_SAFE_EN		(CKCTL_6345_ENET_EN |	\
 					CKCTL_6345_USBH_EN |	\
@@ -191,6 +196,7 @@
 /* Soft Reset register */
 #define PERF_SOFTRESET_REG		0x28
 #define PERF_SOFTRESET_6328_REG		0x10
+#define PERF_SOFTRESET_6358_REG		0x34
 #define PERF_SOFTRESET_6368_REG		0x10
 
 #define SOFTRESET_6328_SPI_MASK		(1 << 0)
@@ -244,6 +250,15 @@
 				  SOFTRESET_6348_ACLC_MASK |		\
 				  SOFTRESET_6348_ADSLMIPSPLL_MASK)
 
+#define SOFTRESET_6358_SPI_MASK		(1 << 0)
+#define SOFTRESET_6358_ENET_MASK	(1 << 2)
+#define SOFTRESET_6358_MPI_MASK		(1 << 3)
+#define SOFTRESET_6358_EPHY_MASK	(1 << 6)
+#define SOFTRESET_6358_SAR_MASK		(1 << 7)
+#define SOFTRESET_6358_USBH_MASK	(1 << 12)
+#define SOFTRESET_6358_PCM_MASK		(1 << 13)
+#define SOFTRESET_6358_ADSL_MASK	(1 << 14)
+
 #define SOFTRESET_6368_SPI_MASK		(1 << 0)
 #define SOFTRESET_6368_MPI_MASK		(1 << 3)
 #define SOFTRESET_6368_EPHY_MASK	(1 << 6)